Highly selective transition-metal-free transamidation of amides and amidation of esters at room temperature


Amide chemistry has an essential role in the synthesis of high value molecules, such as pharmaceuticals, natural products, and fine chemicals. Over the past years, several examples of transamidation reactions have been reported. In general, transition-metal-based catalysts or harsh conditions are employed for these transformations due to unfavorable kinetics and thermodynamics of the process. Herein, we report a significant advance in this area and present the general method for transition-metal-free transamidation of amides and amidation of esters by highly selective acyl cleavage with non-nucleophilic amines at room temperature. In contrast to metal-catalyzed protocols, the method is operationally-simple, environmentally-friendly, and operates under exceedingly mild conditions. The practical value is highlighted by the synthesis of valuable amides in high yields. Considering the key role of amides in various branches of chemical science, we envision that this broadly applicable method will be of great interest in organic synthesis, drug discovery, and biochemistry.


The amide bond is the most fundamental functional group in chemistry and biology1,2,3. The amide linkage is essential for the structure of peptides, proteins and other biologically-relevant molecules4,5,6. The amide bond is found in numerous natural products, pharmaceuticals and polymers7. Recent surveys indicate that the amide bond is present in 25% of registered drugs, while amidation reactions represent the most common reaction performed in the synthesis of pharmaceuticals8. As a consequence of the ubiquity of amide bonds, methods for the synthesis of amides have a major impact on every branch of chemical science.

Transamidation reactions are potentially the most useful class of amide bond forming reactions in organic chemistry (Fig. 1)9,10. However, while different reagents have been developed for these transformations, the chemoselective transition-metal-free11,12,13,14 transamidation under mild conditions remains an unsolved challenge. Slower to develop have also been methods that allow for the direct conversion of esters to amides10. Among many potential advantages, the direct transamidation of amides and esters offers the enhanced stability of precursors, compatibility with multistep reaction sequences, and direct engagement of the typically-considered unreactive amide and ester functional groups in their latent form. For example, in their recent studies, Hillmyer and co-workers employed metal-free transamidation of activated poly(N,N-Boc2-amide) derived directly from primary acrylamide to enable the synthesis of polymers by exploiting postpolymer modification (vide infra)15. The recent developments notwithstanding, this specific method is incompatible with the extremely valuable non-nucleophilic amines.

Fig. 1

Recent directions in amide bond forming reactions. a Traditional transamidation. b Transition-metal-catalyzed N–C(O) and O–C(O) cross-coupling. c Transition-metal-free transamidation and amidation reactions by selective N–C/O–C cleavage

Meanwhile, there have been major developments in the discovery of transition-metal-catalyzed cross-coupling reactions of amides and aromatic esters by N–C(acyl) and O–C(acyl) cleavage. This powerful reaction manifold16 demonstrates that common amides and esters can be readily modulated to provide carbon–carbon and carbon–heteroatom bond functionalization reactions17,18,19,20,21 for chemical synthesis through resonance destabilization of the amide and ester bond22,23. The broad success of the transition-metal-catalyzed activation of amides hinges upon the availability of operationally-simple, straightforward and high-yielding synthetic methods for the direct site-selective N-functionalization of the amide bond16,17,18,19. Broadly, this means that common primary and secondary amides, after simple N-functionalization, can be employed in a wide range of previously elusive transformations of high synthetic value, thus providing a major benefit to practitioners of synthesis.

We recently questioned whether more valuable transition-metal-free amidation reactions24,25,26,27,28 could be employed in conjunction with the widely documented in the cross-coupling literature N-activation of the amide bond and the use of aromatic esters16,17,18,19,20,21 to enable a broadly useful amide bond formation process via selective N–C and O–C cleavage. Herein, we report the successful realization of this concept and present the general method for the transition-metal-free transamidation of amides and amidation of esters by highly selective acyl cleavage with non-nucleophilic amines at room temperature. The protocol exhibits a remarkably broad scope across a range of structurally-diverse substrates ( > 75 examples) and is performed in an operationally-simple, environmentally-friendly manner, in particular in comparison to transition-metal-catalyzed and high-temperature methods10,24,25,26,27,28. We believe that this previously elusive type of transition-metal-free29,30 functionalization of amides and esters by chemo- and regioselective N–C and O–C cleavage will be of great interest in the synthesis of pharmaceuticals, natural products, and polymers. It is worthwhile to note that all amides have been prepared directly from secondary and primary amides22, thus representing an operationally-trivial and broadly applicable two-step method for transamidation of common primary and secondary amides under exceedingly mild conditions.


Transamidation of amides

In initial studies, we examined the transamidation of N-Boc activated secondary benzamide 1a, which could be prepared in high yield by site-selective N-tert-butoxycarbonylation in high yield22. To our delight, we found that the proposed transition-metal-free transamidation proceeded in 94% yield on a gram scale in the presence of p-anisidine (2.0 equiv), while using LiHMDS (HMDS = hexamethyldisilazane, 3.0 equiv) as a base and toluene (0.25 M) as a solvent at ambient conditions. It is noteworthy that the reaction proceeded in high yield without the need for a toxic transition-metal-catalyst or strict precautions to exclude air (i.e., bench-top set-up), used inexpensive and readily available reagents29,30, achieved the C–N bond cleavage with high selectivity, and advances the existing transamidation methods by utilizing common secondary amide as latent precursor. Further control experiments established that the base was required, with 2a not formed in its absence. Furthermore, a survey of bases revealed that LiHMDS was optimal in terms of reactivity and C–N cleavage selectivity, while KOt-Bu, NaHMDS, n-BuLi and KHMDS provided inferior results (50–91%). The major side process of the transition-metal-catalyzed cross-coupling of amides16,17,18,19, N-Boc scission, was not observed under the developed reaction conditions. Detailed optimization results are shown in Supplementary Table 1. We found that the reaction works efficiently with 1.5 equiv of amine and 1.5 equiv of LiHMDS in the model substrate. The reaction is sensitive to solvent concentration used. For some cases, the use of NaHMDS is preferred over LiHMDS. For reactive substrates, 1.0 equiv of amine suffices to achieve high conversion. The reaction was discovered during the development of broadly defined amidation protocols. A critical concern in transition-metal-catalysis involves toxic and expensive reagents as well as the removal of undesired impurities from the post-reaction mixture. We recognized that a transition-metal-free protocol would provide a simple and powerful amidation method.

Examination of the scope revealed that a remarkably broad range of non-nucleophilic amines and amides are suitable for this mild, transition-metal-fee transamidation protocol (Fig. 2). Electronically-diverse and extremely sterically-hindered anilines were found to be excellent substrates. Notably, the reaction tolerates a wide range of challenging and sensitive substrates that are incompatible or problematic with metal-catalyzed and high-temperature protocols, including esters, halides, heterocycles, highly electron-deficient arenes (e.g., the classically-challenging in cross-coupling pentafluoroaniline and 8-aminoquinoline)31 as well as N,N-disubstituted anilines and deactivated aliphatic amines. Perhaps equally remarkably, a broad spectrum of amides, including a comprehensive survey of aliphatic amides with linear, branched and steric-hindrance at the α-carbon, can be employed in this protocol even though transition-metal-catalyzed reactions often require extensive ligand and reaction condition optimization25, thus representing a significant advantage of the present method.

Fig. 2

Transition-metal-free transamidation of amides: reaction scope. Amide (1.0 equiv), 2 (2.0 equiv), LiHMDS (3.0 equiv), toluene (0.25 M), 23 °C, 15 h. Isolated yields. a2 (1.5 equiv), LiHMDS (2.3 equiv). bDMF (0.25 M). cNaHMDS (3.0 equiv)

The fact that valuable amides are formed directly under mild, transition-metal-free conditions in this protocol is readily appreciated given that previous similar examples required expensive, toxic and sensitive Ni(0) and Pd(II)-catalyst systems24,25,26,27,28, which additionally have the potential issues that the removal of undesired metal contamination would create a considerable problem for industrial research29,30.

Amidation of esters

We were pleased to learn that the developed amidation method could be extended to aromatic esters (Fig. 3). Seminal studies by Yamaguchi and Itami20, and more recently Newman21 established the synthetic utility of O–C(acyl) cleavage in aryl esters by transition metals. The engagement of phenyl esters in transition-metal-catalyzed protocols allows the bench-stable, orthogonal ester moieties to be used directly as leaving groups. The process described here (Fig. 3) provides for a transition-metal-free amidation approach to amide bond formation from phenyl esters. Notably, the scope of the reaction is very broad and accommodates significant structural and electronic diversity in terms of both amine and ester components. Of particular note, the formation of sterically-hindered, electrophilic, highly electron-deficient, and aliphatic amides was achieved in high yields, thus further demonstrating the mild conditions and advantages of the present protocol. Collectively, the results in Figs. 2, 3 show that (1) the concept of a unified reactivity scale for manipulation of amides and esters by resonance destabilization is not limited to transition-metal-catalysis16,32, (2) useful levels of selectivity superseding transition-metal-catalysis on several levels16,17,18,19,20,21,29,30 can be achieved in the transition-metal-free amidation reactions of amides and esters by N–C and O–C cleavage.

Fig. 3

Transition-metal-free amidation of esters: reaction scope. Ester (1.0 equiv), 2 (2.0 equiv), LiHMDS (3.0 equiv), toluene (0.25 M), 23 °C, 15 h. Isolated yields. a2 (1.0 equiv), LiHMDS (2.0 equiv). bNaHMDS (3.0 equiv)

Transamidation of N,N-Boc2 amides

With respect to generality, efficient transamidation with non-nucleophilic amines was also observed in the case of N,N-Boc2 amides (Fig. 4)22. In this case, the process significantly expands the known methods for transamidation of the primary carboxamide group to operationally-convenient, exceedingly mild reaction conditions, high functional group compatibility, and the use of pharmaceutically-valuable deactivated anilines. Several additional points with respect to the substrate scope should be noted: (1) while this study is focused on the use of non-nucleophilic aromatic amides due to the importance of aryl amides in chemistry, we found that diethylamine is a competent nucleophile in amidation of esters (4a, 65%, unoptimized yield). (2) Moreover, we demonstrated that n-butylamine is a competent nucleophile in transamidation of amides under these conditions (1a, 97% unoptimized yield). (3) Intriguingly, the present method can be used to cleave N-8-aminoquinolinyl amides (88%, unoptimized yield) and the activated Yu-Wasa auxiliary (82%, unoptimized yield)33.

Fig. 4

Transition-metal-free transamidation of N,N-Boc2 amides: reaction scope. Amide (1.0 equiv), 2 (2.0 equiv), LiHMDS (3.0 equiv), toluene (0.25 M), 23 °C, 15 h. Isolated yields. aNaHMDS (3.0 equiv)

Transamidation of various amides

Notably, the transamidation reaction is tolerant of various amide substitution patterns, including secondary N-alkyl amides, N-sulfonamide activation, and N-acyl-pyrroles, attesting to the generality of the protocol (Fig. 5)16. The functional group tolerance to aryl bromide should be noted. Since N-acylpyrroles can be readily prepared from primary benzamides34, the latter process provides a valuable alternative two-step approach to transamidation of primary amides.

Fig. 5

Transition-metal-free transamidation of amides. Amide (1.0 equiv), 2 (2.0 equiv), LiHMDS (3.0 equiv), toluene (0.25 M), 23 °C, 15 h. Isolated yields. a2: p-Anisidine (2.0 equiv)

Pleasingly, chiral amino acids can be directly employed without detectable loss of enantiopurity (Fig. 6). It is particularly notable that the previous state-of-the-art example involved a transition-metal-catalyzed coupling of 4 with PhNH2 at 110 °C26, clearly establishing a significant value of the present method from the practical and environmental standpoint29,30.

Fig. 6

Enantiopure amino-acid derivative. Reaction of enantiopure amino-acid derivative 4j with aniline 2o

One-pot amide N-activation/amidation is also feasible (Fig. 7). This operationally-simple procedure was carried out using electronically deactivated, halide-containing aniline that (1) features electrophilic handles for classical cross-coupling, and (2) would not be tolerated in related metal-catalyzed amidation protocols10,24,25,26,27,28.

Fig. 7

One-pot N-activation/transamidation. Reaction of secondary amide 1r with Boc2O and aniline 2p

The suitability of the transition-metal-free amidation in a model system for polymer synthesis was investigated (Fig. 8). Recently, Hillmyer and co-workers accomplished radical polymerization/post-polymerization metal-free transamidation of activated poly(N,N-Boc2-amide)15. We established that the transamidation of a model N,N-Boc2-isobutyramide bearing α-branching at the carbon center with aniline proceeded in high yield, thus demonstrating the enticing potential for modification in polymer synthesis.

Fig. 8

Post-polymer modification. a Previous study using nucleophilic amines. b This study using non-nucleophilic amines in a model system

The practical value of the method was further showcased in the synthesis of pharmaceuticals, a reversible MAO inhibitor, moclobemide and lidocaine, a high profile local anesthetic (Fig. 9)35. A defining feature in the approach to lidocaine is the potential of this protocol to provide an alternative disconnection owing to the stability of the ester group to streamline the synthesis of analogs. As shown in Fig. 9, the classic approach to lidocaine anesthetics involves a direct acylation of 2,6-dimethylaniline with 2-chloracetyl chloride, followed by an SN2 reaction with diethylamine. The use of activated esters enables reversal of this sequence facilitating rapid synthesis of amide analogs of the powerful anesthetic.

Fig. 9

Synthesis of Moclobemide and Lidocaine. Reaction of ester 4k with amine 2q, and reaction of ester 4l with aniline 2f

Mechanistic investigation

Preliminary mechanistic studies were conducted. The results of mechanistic studies are summarized in Supplementary Figs. 14. The studies demonstrate that the reaction pathway involves initial deprotonation, followed by nucleophilic addition to the acyl bond. This mechanism is distinct from the traditional nucleophilic addition to tetrahedral intermediates, which proceed through addition-deprotonation pathway. As a key consideration, high selectivity of the acyl N–C/O–C cleavage under exceedingly mild conditions is achieved through ground-state destabilization of amide and ester bonds.

Specifically, intermolecular competition experiments revealed that the electronic nature of aniline does not significantly affect the reactivity; however, a trend favoring electron-deficient anilines should be noted (4-CF3 vs. 4-MeO, amide: 3.6:1; ester: 1.3:1), while electron-deficient amides and esters are more reactive than their electron-rich counterparts (4-CF3 vs. 4-MeO, amide: 2.3:1; ester: 5:1). Further competition experiments established a similar order of reactivity of amides and esters (N,N-Ph,Boc ≈ OPh, 1:1). Finally, anilines were found to be significantly more reactive than aliphatic amines (PhNH2 vs. n-BuNH2, amide: 9:1; ester > 20:1). Overall, these preliminary studies are consistent with the key role for amine deprotonation and, importantly, identify a common manifold for transition-metal-free functionalization of amides and esters. We hypothesize that aniline activation by hydrogen bonding to the carbonyl substrate activates the amine towards smooth deprotonation. The high selectivity of the nucleophilic addition hinges upon resonance destabilization of the acyl group22,23. Further studies to elucidate the mechanism are ongoing.


In summary, we have developed a mild, transition-metal-free and operationally-simple protocol for transamidation of amides and amidation of esters. The scope of this transformation is very broad, the reagents that are utilized are cheap and readily available, and there is no need for toxic transition-metals or harsh reaction conditions. The practical value for applications in organic synthesis has been demonstrated through high functional group compatibility, preparation of pharmaceutical agents, potential for late-stage modification, and compatibility with enantiopure amino acids.

More generally, the concept deployed here advances the repertoire of transamidation methods to exceptionally mild and powerful amide bond forming reactions exploiting highly chemoselective, transition-metal-free N–C cleavage. Equally important is the pivotal role of resonance-guided common amide and ester manifold in transition-metal-free transformations in organic synthesis. Given the importance of amide bonds in modern chemistry, we anticipate that this general and broadly applicable concept will be of great interest in the synthesis of functionalized amide-containing building blocks. Studies to expand the scope of the protocol with respect to the O-leaving group are underway.


General procedure for transamidation and amidation reactions

An oven-dried vial equipped with a stir bar was charged with an amide or ester substrate (neat, 1.0 equiv), amine (typically, 2.0 equiv) placed under a positive pressure of argon, and subjected to three evacuation/backfilling cycles. Toluene (typically, 0.25 M) and LiHMDS (1.0 M in THF, typically, 3.0 equiv) were sequentially added with vigorous stirring at room temperature, and the reaction mixture was stirred at room temperature for an indicated time. After the indicated time, the reaction mixture was quenched with NH4Cl (aq., 1.0 M, 1 mL), diluted with CH2Cl2 (10 mL), the organic layer was washed with water (1 × 10 mL), brine (1 × 10 mL), dried and concentrated. Purification by chromatography on silica gel (EtOAc/hexanes) afforded the title product.

Data availability

Experimental procedures and characterization data are available within this article and its Supplementary Information. Data are also available from the corresponding author on request.


  1. 1.

    Greenberg, A., Breneman, C. M. & Liebman, J. F. The Amide Linkage: Structural Significance in Chemistry, Biochemistry and Materials Science (Wiley-VCH, New York, 2003).

  2. 2.

    Tani, K. & Stoltz, B. M. Synthesis and structural analysis of 2-quinuclidonium tetrafluoroborate. Nature 441, 731–734 (2006).

    ADS  CAS  Article  Google Scholar 

  3. 3.

    Aubé, J. A new twist on amide solvolysis. Angew. Chem. Int. Ed. 51, 3063–3065 (2012).

    Article  Google Scholar 

  4. 4.

    Pauling, L. The Nature of the Chemical Bond (Oxford University Press, London, 1940).

  5. 5.

    Pattabiraman, V. R. & Bode, J. W. Rethinking amide bond synthesis. Nature 480, 471–479 (2011).

    ADS  CAS  Article  Google Scholar 

  6. 6.

    Hughes, A. B. Amino Acids, Peptides and Proteins in Organic Chemistry (Wiley, Weinheim, 2011).

  7. 7.

    Marchildon, K. Polyamides–still strong after seventy years. Macromol. React. Eng. 5, 22–54 (2011).

    CAS  Article  Google Scholar 

  8. 8.

    Brown, D. G. & Boström, J. Analysis of past and present synthetic methodologies on medicinal chemistry: where have all the new reactions gone? J. Med. Chem. 59, 4443–4458 (2016).

    CAS  Article  Google Scholar 

  9. 9.

    Marcia de Figueiredo, R., Suppo, J. S. & Campagne, J. M. Nonclassical routes for amide bond formation. Chem. Rev. 116, 12029–12122 (2016).

    Article  Google Scholar 

  10. 10.

    Loomis, W. D. & Stumpf, P. K. in Transamination and Transamidation (Nitrogen Metabolism) (eds Allen, E. K.) (Springer, Berlin, 1958).

  11. 11.

    Kaiser, D. & Maulide, N. Making the least reactive electrophile the first in class: domino electrophilic activation of amides. J. Org. Chem. 81, 4421–4428 (2016).

    CAS  Article  Google Scholar 

  12. 12.

    Peng, B., Huang, X., Xie, L. G. & Maulide, N. A Brønsted acid catalyzed redox arylation. Angew. Chem. Int. Ed. 53, 8718–8721 (2014).

    CAS  Article  Google Scholar 

  13. 13.

    de la Torre, A., Kaiser, D. & Maulide, N. Flexible and chemoselective oxidation of amides to α-keto amides and α-hydroxy amides. J. Am. Chem. Soc. 139, 6578–6581 (2017).

    Article  Google Scholar 

  14. 14.

    Kaiser, D., Teskey, C. J., Adler, P. & Maulide, N. Chemoselective intermolecular cross-enolate-type coupling of amides. J. Am. Chem. Soc. 139, 16040–16043 (2017).

    CAS  Article  Google Scholar 

  15. 15.

    Larsen, M. B., Herzog, S. E., Quilter, H. C. & Hillmyer, M. A. Activated polyacrylamides as versatile substrates for postpolymerization modification. ACS Macro Lett. 7, 122–126 (2018).

    CAS  Article  Google Scholar 

  16. 16.

    Takise, R., Muto, K. & Yamaguchi, J. Cross-coupling of aromatic esters and amides. Chem. Soc. Rev. 46, 5864–5888 (2017).

    CAS  Article  Google Scholar 

  17. 17.

    Hie, L. et al. Conversion of amides to esters by the nickel-catalysed activation of amide C–N bonds. Nature 524, 79–83 (2015).

    ADS  CAS  Article  Google Scholar 

  18. 18.

    Meng, G. & Szostak, M. General olefin synthesis by the palladium-catalyzed Heck reaction of amides: sterically-controlled chemoselective N–C activation. Angew. Chem. Int. Ed. 54, 14518–14522 (2015).

    CAS  Article  Google Scholar 

  19. 19.

    Shi, S., Meng, G. & Szostak, M. Synthesis of biaryls via nickel catalyzed Suzuki–Miyaura coupling of amides by carbon–nitrogen cleavage. Angew. Chem. Int. Ed. 55, 6959–6963 (2016).

    CAS  Article  Google Scholar 

  20. 20.

    Amaike, K., Muto, K., Yamaguchi, J. & Itami, K. Decarbonylative C−H coupling of azoles and aryl esters: unprecedented nickel catalysis and application to the synthesis of Muscoride A. J. Am. Chem. Soc. 134, 13573–13576 (2012).

    CAS  Article  Google Scholar 

  21. 21.

    Halima, T. B. et al. Palladium-catalyzed Suzuki–Miyaura coupling of aryl esters. J. Am. Chem. Soc. 139, 1311–1318 (2017).

    Article  Google Scholar 

  22. 22.

    Meng, G., Shi, S., Lalancette, R., Szostak, R. & Szostak, M. Reversible twisting of primary amides via ground state N−C(O) destabilization: highly twisted rotationally inverted acyclic amides. J. Am. Chem. Soc. 140, 727–734 (2018).

    CAS  Article  Google Scholar 

  23. 23.

    Liebman, J. & Greenberg, A. The origin of rotational barriers in amides and esters. Biophys. Chem. 1, 222–226 (1974).

    CAS  Article  Google Scholar 

  24. 24.

    Baker, E. L., Yamano, M. M., Zhou, Y., Anthony, S. M. & Garg, N. K. A two-step approach to achieve secondary amide transamidation enabled by nickel catalysis. Nat. Commun. 7, 11554 (2016).

    ADS  Article  Google Scholar 

  25. 25.

    Dander, J. E., Baker, E. L. & Garg, N. K. Nickel-catalyzed transamidation of aliphatic amide derivatives. Chem. Sci. 8, 6433–6438 (2017).

    CAS  Article  Google Scholar 

  26. 26.

    Halima, T. B., Vandavasi, J. K., Shkoor, M. & Newman, S. G. A cross-coupling approach to amide bond formation from esters. ACS Catal. 7, 2176–2180 (2017).

    Article  Google Scholar 

  27. 27.

    Meng, G., Lei, P. & Szostak, M. A general method for two-step transamidation of secondary amides using commercially available, air- and moisture-stable palladium/NHC (N-heterocyclic carbene) complexes. Org. Lett. 19, 2158–2161 (2017).

    CAS  Article  Google Scholar 

  28. 28.

    Shi, S. & Szostak, M. Pd–PEPPSI: A general Pd–NHC precatalyst for Buchwald–Hartwig cross-coupling of esters and amides (transamidation) under the same reaction conditions. Chem. Commun. 53, 10584–10587 (2017).

    CAS  Article  Google Scholar 

  29. 29.

    Summerton, L., Sneddon, H. F., Jones, L. C. & Clark, J. H. Green and Sustainable Medicinal Chemistry: Methods, Tools and Strategies for the 21 st Century Pharmaceutical Industry (RSC, Cambridge, 2016).

  30. 30.

    Li, C. J. & Trost, B. M. Green chemistry for chemical synthesis. Proc. Natl Acad. Sci. 105, 13197–13202 (2008).

    ADS  CAS  Article  Google Scholar 

  31. 31.

    Molander, G. A., Wolfe, J. P. & Larhed, M. Science of Synthesis: Cross-Coupling and Heck-Type Reactions (Thieme, Stuttgart, 2013).

  32. 32.

    Ruider, S. A. & Maulide, N. Strong bonds made weak: towards the general utility of amides as synthetic modules. Angew. Chem. Int. Ed. 54, 13856–13858 (2015).

    CAS  Article  Google Scholar 

  33. 33.

    Verho, O., Lati, M. P. & Oschmann, M. A two-step procedure for the overall transamidation of 8-aminoquinoline amides proceeding via the intermediate N-acyl-Boc-carbamates. J. Org. Chem. 83, 4464–4476 (2018).

    CAS  Article  Google Scholar 

  34. 34.

    Ferreira, V. F. et al. Recent advances in the synthesis of pyrroles. Org. Prep. Proced. Int. 33, 411–454 (2001).

    CAS  Article  Google Scholar 

  35. 35.

    Brunton, L., Chabner, B. & Knollman, B. Goodman and Gilman’s The Pharmacological Basis of Therapeutics (MacGraw-Hill, New York, 2011).

Download references


The NSF (CAREER CHE-1650766) is gratefully acknowledged for support. We thank Mr. Guang Hu and Prof. Stacey Brenner-Moyer (Rutgers University) for assistance with HPLC measurements.

Author information




M.S. and G.L. conceived the concept and designed the experiments. G.L. conducted the chemical reactions described in the manuscript. M.S. wrote the manuscript and all authors contributed to the reading and editing of the manuscript. G.L. compiled the Supplementary Information.

Corresponding author

Correspondence to Michal Szostak.

Ethics declarations

Competing interests

The authors declare no competing interests.

Additional information

Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Electronic supplementary material

Rights and permissions

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Li, G., Szostak, M. Highly selective transition-metal-free transamidation of amides and amidation of esters at room temperature. Nat Commun 9, 4165 (2018). https://doi.org/10.1038/s41467-018-06623-1

Download citation

Further reading


By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.


Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing