Introduction

Globally, a significant amount of organic carbon (C) is stored in soils. The stored soil organic C (SOC) plays an important role in regulating atmospheric CO2 concentrations and climate change1. Priming can promote microbial growth and liberate stabilized soil C after new C additions2,3, and therefore stimulate decomposition of old SOC2,3,4,5,6,7,8,9,10. It has been widely concerned that increased C input to soils due to rising atmospheric CO2 concentrations may limit or reduce SOC storage due to the priming effect, leading to a positive feedback to climate change7,8,9,11. However, another important process, replenishment, has the potential to increase SOC via a variety of mechanisms12,13,14,15. The replenishment may counterbalance the priming effect. The net balance of the two processes determines the direction and magnitude of SOC change by increasing C inputs. Therefore, it is critical to quantify the two processes and the consequent net SOC change.

We quantified both the replenishment and priming effect of new C inputs by synthesizing model-extrapolated incubation experiments in which isotope-labeled C was used to trace the origins of emitted CO2. Overall, 84 data sets were used for the synthesis. In this study, replenishment is the amount of new (added) C left in soil C pools after microbial respiration within a given period of time. The priming effect is the difference in C loss from old SOC between the substrate addition treatment and the control. The net SOC change is replenishment minus priming.

Before the synthesis, four models, including a conventional (i.e., first-order kinetic) decomposition model, an interactive two-pool model, a Michaelis–Menten model, and a reverse Michaelis–Menten model, were evaluated (Fig. 1). The four models represented the replenishment and priming effect with their respective assumptions (Fig. 1 and related equations). We selected the most parsimonious one using deviance information criterion (DIC)16. The selected parsimonious model was further validated, using two modes with either fixed or randomized parameters, as an assurance of model extrapolation beyond the observations. Eventually, we used the most parsimonious model to estimate priming, replenishment, and net C balance at a standardized time point (i.e., 1 year in this study).

Fig. 1
figure 1

Schemes of four soil C dynamic models. a Conventional model; b Interactive model; c Michaelis–Menten model; d Reverse Michaelis–Menten model

Generally, the magnitude of replenishment was greater than that of priming, resulting in a net SOC accumulation after new C input. The magnitude of the net SOC accumulation was positively correlated with the nitrogen-to-C (N:C) ratio of the added substrates. These findings suggest that increasing plant productivity and the consequent increase in C input to soils likely promote SOC accumulation despite the enhanced decomposition of old C via priming.

Results

Synthesis of replenishment and priming

Our analyses showed that new C input induced priming, which on average stimulated C loss from the old SOC equivalent to 9.4% of the newly added C within 1 year (Fig. 2). In comparison, 53.8% of the added new C entered and replenished the SOC stock. The greater magnitude of replenishment compared to the magnitude of the priming effect led to a net increase in SOC equivalent to 32.0% (25.3–38.8, a 95% confidence interval weighed with the variation and sample size in individual studies) of the added new C (Fig. 2).

Fig. 2
figure 2

Synthesis of annual SOC change induced by replenishment and priming, and the consequent net SOC change with a one-time new C addition at the beginning. The magnitude of replenishment is significantly greater than that of priming, resulting in a net SOC accumulation. Mean ± 95% confidence interval

Model evaluation

The priming effect and the replenishment in Fig. 2 were obtained from synthesis of individual isotope-labeled experiments, with a typical data set depicted in Fig. 3 (the example was from study 1 in Supplementary Data 1 and 2). New substrate addition significantly increased CO2 emission from the old SOC (red dots), in comparison with that from the control (blue dots).

Fig. 3
figure 3

An example showing the performances of different models in simulating cumulative CO2 emissions from old and new C substrates. Dots and lines are observations and model simulations, respectively. Shading areas are the simulated ranges from 2.5th to 97.5th percentiles (i.e., 95% range). Blue and red, CO2 emissions from old C at the control and new C addition treatments, respectively; Black, CO2 emissions from added new C. The distributions of model-simulated cumulative CO2 emissions at the end of experiment are also shown in each panel

In the literature, the priming effect is traditionally expressed as a percent increase in CO2 emission from the old SOC under the new substrate addition treatment relative to that in the control. For the case study in Fig. 3, the CO2 emission from the old SOC in the substrate addition treatment was 34% greater than that in the control at the end of the incubation experiment (i.e., day 66; Fig. 3). The 34% increase in C loss from the old SOC was equivalent to 37.1% of the added 1000 mg C g−1 soil. After 66 days of incubation, 40.2% of the added C was replenished to the soil C pools while 59.8% was directly released from the new substrate via microbial respiration, leading to a net SOC increase of 3.1% of the added C (Supplementary Data 2). In the current study, we quantified the priming effect relative to the amount of added C at standardized time points (Supplementary Fig. 1) in order to synthesize results from a group of diverse studies.

The four types of models described in Fig. 1 were trained by the data set in order to estimate the priming effect and replenishment at the end of 1 year. For the example shown in Fig. 3, the conventional model fitted the data extremely well in both the substrate addition and control treatments separately (R2 = 0.99; Fig. 3a and Supplementary Data 3). The interactive model performed very well for both the substrate addition and control treatments together (R2 = 0.97; Fig. 3b and Supplementary Data 4). However, the regular Michaelis–Menten model tended to underestimate the cumulative CO2 emissions from SOC for both the substrate addition and control treatments, especially toward the end of the experiment (R2 = 0.85; Fig. 3c and Supplementary Data 5). Lastly, the reverse Michaelis–Menten model fitted the cumulative CO2 emission data from the new substrate and old SOC in the control but not in the substrate addition treatment (R2 = 0.95; Fig. 3d and Supplementary Data 6).

The model evaluation against all the training data (group I in Supplementary Data 1; statistically called within-sample evaluation) indicated that the regular Michaelis–Menten model did not adequately describe the SOC decomposition with priming and replenishment, showing a relatively high deviance information criterion (DIC) and a low data–model agreement (Fig. 4c and Table 1). Although the conventional and reverse Michaelis–Menten models reasonably fitted the cumulative CO2 emissions, they did not demonstrate a high likelihood («0.5) of representation for replenishment and priming due to overfitting issues (Fig. 4a, d and Table 1). The interactive model fitted the data well, was the most parsimonious model (with the smallest DIC; Fig. 4b and Table 1), and was further validated by two modes with either fixed or randomized parameters (i.e., statistically called out-of-sample validation; Supplementary Figs. 24). The validation with either fixed or randomized parameters indicated that the calibrated interactive model well represents the priming effects regardless of experimental conditions. As such, the optimized interactive model was used to estimate annual C replenishment, priming, and net SOC change across all studies (Fig. 2). In addition, we standardized the results by the amount of added new C.

Table 1 Performance of models in simulating SOC dynamics with replenishment and priming
Fig. 4
figure 4

Within-sample model evaluation. Blue and red dots are CO2 emissions from old C at the control and new C addition treatments, respectively; Black dots are CO2 emissions from added new C; Solid line: linear regression (slope, R2, P values are shown in Table 1); Dashed line, 1:1 line

Impacts of abiotic and biotic factors

After the standardization, neither the loss of the added C, nor replenishment, nor the net SOC change was dependent on the amount of added new C (Supplementary Fig. 5). In the experiments synthesized in this study, the soil water content ranged from 45 to 70% of water holding capacity and incubation temperatures varied from 0 to 28 °C. The estimated net C change was not dependent on either the soil water content or incubation temperature (Supplementary Fig. 6). In addition, the loss of the added C was not influenced by priming (Supplementary Fig. 7). After dividing the added C substrates into three categories: without N (e.g., glucose and starch), low N:C ratio (i.e., straw), and high N:C ratio (i.e., leaf materials), results showed that replenishment increased while priming decreased with an increase in substrate N:C ratio (Fig. 5). In addition, the net SOC increases in response to new C input ranged from 54 (high N:C ratio) to 41% (low N:C ratio) and to 19% (without N) of the newly added C (Fig. 5).

Fig. 5
figure 5

Synthesis of the dependence of annual replenishment, priming, and net SOC change on substrate N:C ratio. The replenishment increased, but priming decreased, with the increase in substrate N:C ratio. Thus, the net SOC change significantly increased with the increase in substrate N:C ratio. The number of studies for each category is shown near the bar. Mean ± 95% confidence interval

Modeling experiment with continuous C inputs

The synthesis conducted in this study was from data with a single C input at the beginning of experiments. Here we explored the effect of continuously increased new C input on SOC change using the interactive model. Results showed that a 10% step increase in C input starting from the beginning of the modeling experiment enhanced SOC by 43.1% of the total increased C input after 1 year (Fig. 6a). The increase in SOC induced by a gradual increase in C inputs was 45.5% of the total increased C input over the year (Fig. 6b). In addition, the magnitude of SOC change generally increased with the substrate N:C ratio (Supplementary Fig. 8). Overall, the modeling experiment confirmed that increased new C inputs promote accumulation of added substrates, which was independent of temperature and moisture conditions (Supplementary Fig. 9).

Fig. 6
figure 6

Synthesis of the modeling experiment. The modeling experiment showing net SOC increase by continuously increased C inputs. a Predicted net SOC change by a 10% step increase in C input for 1 year. b Predicted net SOC change by gradual increase in C input. Mean ± 95% confidence interval

Discussion

The general C accumulation after the additional new C input may be due to both physiochemical and biological interactions. First, the added new C might be protected by direct physical and chemical bonding to the soil mineral complex17,18,19. Second, a proportion of the new C can be utilized to increase microbial biomass with a concomitant production of metabolic by-products12,13. Through microbial processes the added C can also be transferred to the stable SOC fraction12,13,14,19,20. Although increased microbial growth may promote the decomposition of old SOC for energy and nutrient acquisition4, our results illustrated that the amount of C loss resulting from the priming effect was five times smaller, on average, than the amount of replenished soil C. Despite the general pattern of C accumulations following a new C input (Fig. 2), several individual studies have shown net SOC loss, primarily from saline alkaline21 or low-fertility soils22.

The enhanced replenishment with high substrate N:C ratio (Fig. 5) may be due to a more efficient utilization of substrates with high N:C ratios for the growth of microbial biomass compared to low N:C substrates13,14,20,23. In contrast, a higher priming loss of old SOC occurred when the added substrates have lower N:C ratios (Fig. 5), likely due to the scarcity of N. In this case, soil microbes scavenge N via the decomposition of old soil organic matter, resulting in stronger priming effects3,24. To further confirm the N mining hypothesis, we need more innovative incubation experiments to simultaneously quantify both C loss and N mineralization in response to additions of new C with different N content. These results suggest that the priming effect appears to become stronger, whereas the net increase in SOC resulting from the enhanced substrate input may decrease9,25 if atmospheric CO2 enrichment reduces the plant tissue N:C ratio26,27,28.

In this study, the quantitative estimations were based on laboratory incubation experiments, which may be biased when applying in the field due to at least the two following reasons. First, disturbance and microenvironmental changes in the incubation experiments may influence the magnitudes of the replenishment, priming, and net effect. Second, soil microbial community in the incubation jars may be different from that in the field. Thus, the values of the replenishment, priming, and net effect reported in this study should be used with caution.

Overall, this study quantitatively synthesized two important processes, replenishment and priming, in SOC dynamics. With the increase in C inputs, the magnitude of replenishment is generally greater than that of priming, resulting in net SOC accumulations over time. The results indicate that the anticipated increase in C inputs to soils under elevated CO2 has the potential to mitigate climate change.

We also selected a best-fit model (i.e., the interactive model) using the extensive data sets. The interactive model, which represents priming by a power function of old C decomposition rate with the amount of the new C, is the most parsimonious. Our validation of the model with either fixed or randomized parameters indicates that the interactive model is able to well represent the priming effect and replenishment regardless of experimental conditions.

Methods

Data collection

A comprehensive literature search, with key words “isotope” and “soil incubation”, was conducted using the online search connection Web of Science in endnote. Three criteria were used to select the searched studies. First, the experiments included both the control and isotope-labeled C addition treatments. Second, SOC content, the added new C amounts, and multiple CO2 emission rates (>2 time points) from old SOC and new substrates were reported. Third, the experiments lasted at least 4 weeks. Based on the criteria, 84 data sets from 26 publications were selected (Supplementary Data 1 and 2; refs. 21,22,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52). In addition, to explore the influence of substrate N:C ratio, the collected studies were divided into three groups: without N (e.g., glucose and starch), low N:C ratio (i.e., straw), and high N:C ratio (leaf materials). The amount of added C in most (i.e., over 2/3) of the collected studies fell within the range of <10% of SOC stocks. Global litter productivity is about 3–5% of global SOC stocks. The total C input to soils would be even more if considering root exudates though the global estimate is uncertain to our knowledge. In addition, Earth system models generally predict the C input could increase by 25–60% by the end of the twenty-first century53. Thus, the experimental additions are generally in accordance with the global C input estimates.

Models

Four different types of models, which had their respective assumptions to represent the replenishment and priming effect, were evaluated (Fig. 1). The four models included a conventional model, an interactive model, a regular Michaelis–Menten model, and a reverse Michaelis–Menten model. In the models, old C pools were those pre-existing and relative stable SOC, and new C pools were freshly added C which can be transferred to old C pools as decomposition proceeded. Like most Earth system models54,55, the conventional model used first-order equations as shown below:

$$\frac{{{\rm{d}}\,{}^1N}}{{{\rm{d}}t}} = I - K_N \times \,{}^1N$$
(1)
$$\frac{{{\rm{d}}\,{}^1L}}{{{\rm{d}}t}} = K_N \times \,{}^1N \times a_{L,N} + K_R \times \,{}^1R \times a_{L,R} - K_L \times \,{}^1L$$
(2)
$$\frac{{{\rm{d}}\,{}^1R}}{{{\rm{d}}t}} = K_N \times \,{}^1N \times a_{R,N} + K_L \times \,{}^1L \times a_{R,L} - K_R \times \,{}^1R$$
(3)
$$\frac{{{\rm{d}}\,{}^1O}}{{{\rm{d}}t}} = \frac{{{\rm{d}}\,{}^1L}}{{{\rm{d}}t}} + \frac{{{\rm{d}}\,{}^1R}}{{{\rm{d}}t}}$$
(4)
$$\frac{{{\rm{d}}\,{}^{\mathrm{n}}L}}{{{\rm{d}}t}} = K_N \times \,{}^{\mathrm{n}}N \times a_{L,N} + K_R \times \,{}^{\mathrm{n}}R \times a_{L,R} - K_L \times \,{}^{\mathrm{n}}L$$
(5)
$$\frac{{{\rm{d}}\,^{\rm{n}}R}}{{{\rm{d}}t}} = K_N \times \,{}^{\mathrm{n}}N \times a_{R,N} + K_L \times \,{}^{\mathrm{n}}L \times a_{R,L} - K_R \times \,{}^{\mathrm{n}}R$$
(6)
$$\frac{{{\rm{d}}\,^{\rm{n}}O}}{{{\rm{d}}t}} = \frac{{{\rm{d}}\,^{\rm{n}}L}}{{{\rm{d}}t}} + \frac{{{\rm{d}}\,^{\rm{n}}R}}{{{\rm{d}}t}}$$
(7)
$$\frac{{{\rm{d}}O}}{{{\rm{d}}t}} = \frac{{{\rm{d}}\,{}^{\rm{1}}O}}{{{\rm{d}}t}} + \frac{{{\rm{d}}\,^{\rm{n}}O}}{{{\rm{d}}t}}$$
(8)
$$f_L = \frac{{\,{}^{\mathrm{n}}L_0}}{{\,{}^{\mathrm{n}}L_0 + \,{}^{\mathrm{n}}R_0}}$$
(9)

where left superscript l and n mean isotope-labeled and non-labeled C pools. N is newly added C pool. L and R are labile and recalcitrant pools, respectively. I is new C input rate (mg C g−1 soil per day), which is the amount of added substrate C in the substrate addition treatment at time 0. In the control treatment, I is 0. KN, KL, and KR are decay rates (per day) of new C, labile SOC, and recalcitrant SOC; aL,N and aR,L are transfer coefficients (or carbon use efficiency, unitless) from new C to labile and recalcitrant SOC, respectively; aR,L is transfer coefficient (unitless) from labile to recalcitrant SOC; aL,R is transfer coefficient (unitless) from recalcitrant to labile SOC; O is the old SOC content (mg C g−1 soil); fL is the initial fraction of the labile pool. The conventional model had two sets of parameters, as parameter changes were necessary to represent nonlinear processes in this type of models9,56.

Based on the Introductory C Balance Model (ICBM)57, the interactive model added a term to represent the priming effect. With the interactive model, the soil C dynamics were described as:

$$\frac{{{\rm{d}}\,{}^1N}}{{{\rm{d}}t}} = I - K_N \times \,{}^1N$$
(10)
$$\frac{{{\rm{d}}\,{}^{\rm{1}}O}}{{{\rm{d}}t}} = K_N \times \,{}^1N \times r - (K_O + K_{\mathrm{p}} \times N^p) \times \,{}^1O$$
(11)
$$\frac{{{\rm{d}}\,{}^{\rm{n}}N}}{{{\rm{d}}t}} = - K_N \times \,{}^{\rm{n}}N$$
(12)
$$\frac{{{\rm{d}}\,{}^{\rm{n}}O}}{{{\rm{d}}t}} = K_N \times \,{}^{\rm{n}}N \times r - (K_O + K_{\mathrm{p}} \times N^p) \times \,{}^{\rm{n}}O$$
(13)
$$\frac{{{\rm{d}}N}}{{{\rm{d}}t}} = \frac{{{\rm{d}}\,{}^{\rm{1}}N}}{{{\rm{d}}t}} + \frac{{{\rm{d}}\,{}^{\rm{n}}N}}{{{\rm{d}}t}}$$
(14)
$$\frac{{{\rm{d}}O}}{{{\rm{d}}t}} = \frac{{{\rm{d}}{}^1O}}{{{\rm{d}}t}} + \frac{{{\rm{d}}{}^{\rm{n}}O}}{{{\rm{d}}t}}$$
(15)
$$f_N = \frac{{\,{}^{\mathrm{n}}N_0}}{{\,{}^{\mathrm{n}}N_0 + \,{}^{\mathrm{n}}O_0}}$$
(16)

where N and O are the new and old C pools (mg C g−1 soil); Correspondingly, KN and KO are the base decay rates (per day) of the two pools; r and Kp are the replenishment coefficient and priming coefficient (per day), respectively; p is a factor (unitless) to determine the priming magnitude; fN is the the new pool fraction at the beginning.

The third model was the regular Michaelis–Menten model58,59,60 (Fig. 1c) with the following equations:

$$\frac{{{\rm{d}}{}^{\rm{1}}N}}{{{\rm{d}}t}} = I - B \times \frac{{V_N \times \,{}^{\rm{1}}N}}{{N + K_N}}$$
(17)
$$\frac{{{\rm{d}}{}^1O}}{{{\rm{d}}t}} = \mu _B \times B - B \times \frac{{V_O \times \,{}^1O}}{{O + K_O}}$$
(18)
$$\frac{{{\rm{d}}{}^1B}}{{{\rm{d}}t}} = - \mu _B \times \,{}^1B + \varepsilon \times \,{}^1B \times \left( {\frac{{V_N \times N}}{{N + K_N}} + \frac{{V_O \times O}}{{O + K_O}}} \right)$$
(19)
$$\frac{{{\rm{d}}{}^{\rm{n}}N}}{{{\rm{d}}t}} = - B \times \frac{{V_N \times \,{}^{\rm{n}}N}}{{N + K_N}}$$
(20)
$$\frac{{{\rm{d}}{}^{\rm{n}}O}}{{{\rm{d}}t}} = \mu _B \times B - B \times \frac{{V_O \times \,{}^{\rm{n}}O}}{{O + K_O}}$$
(21)
$$\frac{{{\rm{d}}{}^{\rm{n}}B}}{{{\rm{d}}t}} = - \mu _B \times \,{}^{\rm{n}}B + \varepsilon \times \,{}^{\rm{n}}B \times \left( {\frac{{V_N \times N}}{{N + K_N}} + \frac{{V_O \times O}}{{O + K_O}}} \right)$$
(22)
$$\frac{{{\rm{d}}N}}{{{\rm{d}}t}} = \frac{{{\rm{d}}{}^{{1}}N}}{{{\rm{d}}t}} + \frac{{{\rm{d}}{}^{\rm{n}}N}}{{{\rm{d}}t}}$$
(23)
$$\frac{{{\rm{d}}O}}{{{\rm{d}}t}} = \frac{{{\rm{d}}{}^{\rm{1}}O}}{{{\rm{d}}t}} + \frac{{{\rm{d}}{}^{\rm{n}}O}}{{{\rm{d}}t}}$$
(24)
$$\frac{{{\rm{d}}B}}{{{\rm{d}}t}} = \frac{{{\rm{d}}{}^1B}}{{{\rm{d}}t}} + \frac{{{\rm{d}}{}^{\rm{n}}B}}{{{\rm{d}}t}}$$
(25)
$$f_N = \frac{{\,{}^{\rm{n}}N_0}}{{\,{}^{\rm{n}}N_0 + \,{}^{\rm{n}}B + \,{}^{\rm{n}}O_0}}$$
(26)
$$f_B = \frac{{\,{}^{\rm{n}}B_0}}{{\,{}^{\rm{n}}N_0 + \,{}^{\rm{n}}B + \,{}^{\rm{n}}O_0}}$$
(27)

where N, O, and B are pool sizes (mg C g−1 soil) of new C, old C, and microbial biomass; VN and VO are maximum substrate C (new or old C) assimilation rates (per day); KN and KO are Michaelis–Menten constants (mg C g−1 soil); μB is turnover rate of microbial biomass (per day); ε is microbial growth efficiency (unitless); fN and fB are the initial fraction of the new and microbial biomass pools.

The fourth model was the reverse Michaelis–Menten model61, 62 as,

$$\frac{{{\rm{d}}\,{}^1N}}{{{\rm{d}}t}} = I - \mu _N \times \,{}^1N \times \frac{B}{{B + K_B}}$$
(28)
$$\frac{{{\rm{d}}\,{}^1O}}{{{\rm{d}}t}} = \mu _B \times B - \mu _O \times \,{}^1O \times \frac{B}{{B + K_B}}$$
(29)
$$\frac{{{\rm{d}}\,{}^1B}}{{{\rm{d}}t}} = - \mu _B \times \,{}^1B + \varepsilon \times \left( {\mu _N \times N + \mu _O \times O} \right) \times \frac{{\,{}^1B}}{{B + K_B}}$$
(30)
$$\frac{{{\rm{d}}\,{}^{\mathrm{n}}N}}{{{\rm{d}}t}} = - \mu _N \times \,{}^{\mathrm{n}}N \times \frac{B}{{B + K_B}}$$
(31)
$$\frac{{{\rm{d}}\,{}^{\mathrm{n}}O}}{{{\rm{d}}t}} = \mu _B \times B - \mu _O \times \,{}^{\mathrm{n}}O \times \frac{B}{{B + K_B}}$$
(32)
$$\frac{{{\rm{d}}\,{}^{\mathrm{n}}B}}{{{\rm{d}}t}} = - \mu _B \times \,{}^{\mathrm{n}}B + \varepsilon \times (\mu _N \times N + \mu _O \times O) \times \frac{{\,{}^{\mathrm{n}}B}}{{B + K_B}}$$
(33)
$$\frac{{{\rm{d}}N}}{{{\rm{d}}t}} = \frac{{{\rm{d}}\,{}^{{1}}N}}{{{\rm{d}}t}} + \frac{{{\rm{d}}\,{}^{\mathrm{n}}N}}{{{\rm{d}}t}}$$
(34)
$$\frac{{{\rm{d}}O}}{{{\rm{d}}t}} = \frac{{{\rm{d}}\,{}^{{1}}O}}{{{\rm{d}}t}} + \frac{{{\rm{d}}\,{}^{\mathrm{n}}O}}{{{\rm{d}}t}}$$
(35)
$$\frac{{{\rm{d}}B}}{{{\rm{d}}t}} = \frac{{{\rm{d}}\,{}^{{1}}B}}{{{\rm{d}}t}} + \frac{{{\rm{d}}\,{}^{\mathrm{n}}B}}{{{\rm{d}}t}}$$
(36)
$$f_N = \frac{{\,{}^{\mathrm{n}}N_0}}{{\,{}^{\mathrm{n}}N_0 + \,{}^{\mathrm{n}}B + \,{}^{\mathrm{n}}O_0}}$$
(37)
$$f_B = \frac{{\,{}^{\mathrm{n}}B_0}}{{\,{}^{\mathrm{n}}N_0 + \,{}^{\mathrm{n}}B + \,{}^{\mathrm{n}}O_0}}$$
(38)

where N, O, and B are pool sizes (mg C g−1 soil) of new C, old C, and microbial biomass; μN, μO, and μB are turnover rates (per day) of new C, old C, and microbial biomass; KB is a coefficient for C consumption by microbes (mg C g−1 soil); ε is microbial growth efficiency (unitless); fN and fB are the initial fraction of the new and microbial biomass pools.

Model optimization and selection

The model optimization was based on Bayes’ theorem:

$$P\left( {\theta \left| Z \right.} \right) \propto P\left( {Z\left| \theta \right.} \right)P(\theta )$$
(39)

where P(θ) and P(θ|Z) of model parameters (θ) are the priori and posterior probability density function (PDF), respectively. Uniform distributions over parameter ranges were used as the priori PDFs. P(Z|θ) is the likelihood function of data, which was calculated as:

$$P\left( {Z\left| \theta \right.} \right) \propto {\rm{exp}}\left\{ { - \mathop {\sum }\limits_{i = 1}^n \mathop {\sum }\limits_{t \in {\mathrm{obs}}(Z_i)} \frac{{\left[ {Z_i\left( t \right) - X_i\left( t \right)} \right]^2}}{{2\sigma _i^2\left( t \right)}}} \right\}$$
(40)

where Zi(t) and Xi(t) are the observed and modeled values, respectively. σi(t) is the standard deviation of measurements.

The adaptive Metropolis–Hastings algorithm was used to optimize the model parameters for each study63,64. The algorithm included two primary steps54,65: First, a new random value (θnew) was generated from the accepted value of the previous step (θold):

$$\theta ^{{\mathrm{new}}} = \theta ^{{\mathrm{old}}} + d\left( {\theta _{{\mathrm{max}}} - \theta _{{\mathrm{min}}}} \right){\mathrm{/}}D$$
(41)

where θmax and θmin are the priori PDF boundaries, D is step size, and d is randomly selected between −0.5 and 0.5. Second, θnew was tested against the Metropolis criterion to accept or reject. The two steps were repeated to generate the posterior PDFs of parameters, after discarding the first half of accepted values. The maximum likelihood estimates (MLEs) of the parameters of the four models are shown in Supplementary Data 3–6.

Deviance information criterion (DIC)16 and likelihood of model66 were used to evaluate the models given the data. For each study, DIC was calculated by

$${\rm{DIC}} = \bar D + p_D$$
(42)

where

$$\bar D = \frac{1}{S}\mathop {\sum }\limits_{i = 1}^S \left( { - 2{\mathrm{log}}\left( {P\left( {Z\left| {\theta ^i} \right.} \right)} \right)} \right)$$
(43)

and

$$p_D = \bar D + 2{\mathrm{log}}\left( {P\left( {Z\left| {\bar \theta } \right.} \right)} \right)$$
(44)

where S is the number of the generated parameter sets, and \(\bar \theta\) is the mean of the generated parameter sets. The weighted average DIC for all studies was calculated by

$${\mathrm{DIC}}_{\mathrm{w}} = \frac{{\mathop {\sum }\nolimits_{i = 1}^{71} {\mathrm{DIC}}_iN_i}}{{\mathop {\sum }\nolimits_{i = 1}^{71} N_i}}$$
(45)

where Ni is the number of data points in the ith study. The smaller DIC is for a model, the better the model is. The likelihood (L) of model given the data was calculated by

$$L = {\mathrm{e}}^{ - 0.5({\mathrm{DIC}}_{{\mathrm{W}}} - {\mathrm{DIC}}_{{\mathrm{min}}})}$$
(46)

where DICmin is the minimum DICw value of the four models. In this study, 0.5 was used as a threshold for L to select model. Only the interactive model had a L value bigger than 0.5 (Table 1).

Model validation

To further validate the selected model (i.e., interactive model in this study) as an assurance of model extrapolation beyond the observations, we employed two modes with both fixed and random parameters for model validation. In the fixed mode of validation, we used three collected publications in which different amounts of new C were added into the same soils32,40,42. For those studies, one new C amount was used for model selection and parameter optimization (studies 8, 34, 36, and 42 in Supplementary Data 1; training group), and the others were used for model validation (studies 9, 10, 35, 37, and 43 in Supplementary Data 1; validation group). The interactive model with optimized (i.e., fixed) parameters with the training data was run with the new C amount at the validation group, and the modeled decomposition rates of SOC and added substrates were compared with observed ones (Supplementary Fig. 2). In the random mode of model validation, the collected 84 data sets were randomly divided into two groups, one for model training and the other for validation. The two groups had similar distribution of the added new C amount (% of SOC) (Supplementary Fig. 3). The trained interactive model by the first group of data was run to predict the priming effect of the second group of data, and was compared with the observations (Supplementary Fig. 4). The model selection and validation results indicated that the selected interactive model had the ability to represent SOC decomposition with priming and replenishment. Thus, the interactive model was used for further analyses.

Estimation of C fluxes

At each time step, the replenishment is calculated as the amount of isotope-labeled C left in the soil C pools after microbial respiration. The priming effect is the difference of cumulative CO2 emission from non-labeled old SOC between the substrate addition treatment and the control. The net effect of the substrate addition on SOC is the difference of total SOC between the substrate addition treatment and the control and can be calculated by subtracting the priming effect from the replenishment.

To synthesize results from a group of diverse studies, the estimations were normalized relative to the amount of added C at a standardized time point. The C dynamics at 1 year after the incubation are at a relatively stable phase (Supplementary Fig. 1). Therefore, the results derived from the modeled C dynamics at 1 year are robust to estimate annual replenishment, priming, and SOC content.

In addtion to the annual estimation, we also conducted a modeling experiment to reveal the effect of continuously increased new C input on SOC change. For each of the data sets with a diverse range of different soils and substrate quality, the optimized interactive model was spun up to steady state with the C input of 0.8 mg C kg−1 soil per day, which approximates a global average C input of 378 g m−2 per year to the topsoil (1 m) with an assumed soil bulk density of 1.3 g cm−3 (ref. 67). After reaching steady state, the model was run for 365 days under three C input scenarios. The first and the second scenarios had constant C inputs of 0.80 (i.e., no increase in C input) and 0.88 (i.e., a 10% step increment) mg C kg−1 soil per day, respectively. In the third scenario, the C input increased linearly from 0.8004 mg C kg−1 soil per day in the first day to 0.9596 mg C kg−1 soil per day in the 365th day. The total C input in the latter two scenarios was 29.2 mg C kg−1 soil greater than that in the first scenario over the year. In addition, we manipulated incubation temperature and moisture to reveal the effect of those environmental factors on the SOC change. To explore the warming effect, we increased temperature by 2 °C. Assuming the temperature sensitivity (Q10) was 2, the warming manipulation increased the rate parameters (k1, k2, and kp) by 15%. By assuming a linear moisture limitation, we also conducted a drying and a wetting treatment, in which the rate parameters were decreased and increased by 10%, respectively.

Synthesis

To estimate the weighted mean (Mweighted) and 95% confidence interval (CI), we treated the estimated priming effect, replenishment, or net SOC change, respectively, as one replicate for each study. The weighted mean and 95% CI were estimated in the MetaWin 2.1 using a meta-analysis technique68,69. Briefly, the weighted mean was calculated as

$$M_{{\mathrm{weighted}}} = \frac{{\mathop {\sum }\nolimits_{j = 1}^k W_j^ \ast M_j}}{{\mathop {\sum }\nolimits_{j = 1}^k W_j^ \ast }}$$
(47)

with the variance as

$$V_{{\mathrm{weighted}}} = \frac{1}{{\mathop {\sum }\nolimits_{j = 1}^k W_j^ \ast }}$$
(48)

where Mj is the mean value of study j, \(W_j^ \ast\) is the weighting factor. The 95% confidence interval (CI) of the weighted mean was estimated as

$${\mathrm{CI}} = M_{{\mathrm{weighted}}} \pm 1.96 \times \sqrt {V_{{\mathrm{weighted}}}}$$
(49)

All the results were tested at P < 0.05 level based on the 95% CI. If the 95% CI did not overlap with zero, it was considered statistically significant. Similarly, non-overlapped 95% CIs indicated significant differences among groups.

Code availability

The computer code used to run the simulations is available upon request.

Data availability

The data used can be found in Supplementary Information.