# Block copolymer crystalsomes with an ultrathin shell to extend blood circulation time

## Abstract

In water, amphiphilic block copolymers (BCPs) can self-assemble into various micelle structures depicting curved liquid/liquid interface. Crystallization, which is incommensurate with this curved space, often leads to defect accumulation and renders the structures leaky, undermining their potential biomedical applications. Herein we report using an emulsion-solution crystallization method to control the crystallization of an amphiphilic BCP, poly (l-lactide acid)-b-poly (ethylene glycol) (PLLA-b-PEG), at curved liquid/liquid interface. The resultant BCP crystalsomes (BCCs) structurally mimic the classical polymersomes and liposomes yet mechanically are more robust thanks to the single crystal-like crystalline PLLA shell. In blood circulation and biodistribution experiments, fluorophore-loaded BCCs show a 24 h circulation half-life and a 8% particle retention in the blood even at 96 h post injection. We further demonstrate that this good performance can be attributed to controlled polymer crystallization and the unique BCC nanostructure.

## Introduction

Over the past few decades, many elegant delivery systems emerged to mimic biological structures such as lipid membranes and virus capsid1,2,3. For example, red blood cells (RBCs)-mimicking particles were reported to resemble natural RBCs’ size, shape, and deformability4,5,6. Self-assembled liposomes that mimic envelope viral structures were developed as tumor-targeting gene delivery carriers7,8. Like lipids, synthetic amphiphilic block copolymers (BCPs) can also self-assemble into similar vesicle structures (defined as polymersomes to emphasize its synthetic polymer origin) in water9,10. Because of the high molecular weight and chain entanglement of the hydrophobic blocks, polymer vesicles are mechanically more stable than liposomes10. Yet polymersomes’ membranes are flexible, and their morphologies/shapes may change over time, particularly under a high shear field. While shape transformation of polymersomes is of great physical and biological interest, in vivo applications call for robust and mechanically stable carrier structures.

Strategies towards permanent BCP assemblies include using crosslinking agents to form shell-cross-linked knedel-like (SCK) particles and incorporating BCP with self-crosslinkable segment11,12. Early studies in polymersome systems showed that polymer crystallization affected the formation of polymersomes as well as their mechanical properties13,14. Discher et al. demonstrated that, after polymer crystallization, vesicles of semicrystalline poly(ethylene oxide)-b-polycaprolactone (PEO-b-PCL) are rigid and leaky, which was attributed to the defects formed between the adjacent polymer crystalline domains (grain boundaries)15. Since many biometrically relevant amphiphilic BCPs are crystallizable at ambient conditions, it is of importance to investigate polymer crystallization at curved nanospace. From a crystallographic standpoint, curved space is incommensurate with three-dimensional translational symmetry. Recent studies on spherical crystallography showed intriguing packing behavior of colloidal particle at the surface of microscale water droplets16,17,18. Intriguing defects or voids were introduced to these curved crystals depending on the nature of particle−particle interaction as well as the size of the particles and water droplets16,17,18. We recently developed a miniemulsion-solution crystallization method to study confined crystallization at nanometer-sized, curved liquid/liquid interface. Polymer-single crystal-like poly (l-lactide) (PLLA) hollow capsules were formed by carefully directing polymer crystallization at curved liquid/liquid interface19. Crystalsome was used to describe this unique assembly, emphasizing its crystalline structure and vesicle-like morphology. While structurally interesting, these PLLA crystalsomes are hydrophobic and cannot be dispersed in water without added surfactants, limiting their potential biomedical applications.

Herein, we report using the emulsion-solution crystallization method to assemble amphiphilic BCP crystalsomes (BCCs). During the crystallization process, the BCP acts both as the surfactant to stabilize oil droplet in water, and as the crystallizable material to form the crystalsome so that the crystallization process is precisely confined at the curved liquid/liquid interface. Nano-sized BCCs are formed with an asymmetric wall comprised of concentric 2.5 nm PLLA lamellar crystal and a 2 nm PEG layer. In the crystal, each PLLA chain folds nine times, rendering a uniform PEG brush layer with a precisely controlled grafting density of 0.3 chain nm−2. While the total wall thickness is only 4.5 ± 0.4 nm (mean ± s.d., n = 10), these BCCs show ultra-long circulation time in vivo. We attribute this superb blood circulation performance to the combination of significantly enhanced mechanical properties of the single crystal-like shell and the uniform PEG brush layer. We envisage BCCs lead to a new class of self-assembled nanoparticle delivery systems.

## Results

### Morphology and structure of PLLA-b-PEG BCCs

In this study, we selected crystalline and biocompatible polymer PLLA as the hydrophobic segment. PEG is chosen as the second block of the BCP as it affords water solubility and stealthability to increase the particle circulation time in the blood20. The fabrication process of PLLA-b-PEG block copolymer crystalsome is shown in Fig. 1. In brief, PLLA-b-PEG is firstly dissolved in toluene at 95 °C. Water is added into the polymer solution and the mixture is ultrasonicated to generate an emulsion, within which the PLLA segments are confined in the toluene droplet while the PEG segments in the water phase. The emulsion is then quenched to 25 °C for crystallization. In this design, PLLA-b-PEG molecules are pinned at the curved liquid/liquid interface after emulsification, crystallization of PLLA is therefore confined at the interface and the formation of more complex spherulites/dendrite crystals inside the droplet is avoided21.

Figure 2a, b show scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images of the PLLA-b-PEG crystalsome that was formed after emulsion-solution crystallization for 9 days. Spherical capsules are seen in both images with a diameter of ~200 nm, which is consistent with dynamic light scattering (DLS) results (Supplementary Figure 1). Atomic force microscopy (AFM) experiments also confirm the spherical morphology (Supplementary Figure 2). In contrast, PLLA-b-PEG single crystals grown from toluene solution instead of toluene/water interface at 25 °C are flat with a lozenge shape (Fig. 2c), with the PLLA crystalline lamella sandwiched by PEG polymer brushes on both sides. (Fig. 2d)14. The observed spherical capsules in Fig. 2a also appear partially collapsed, which might be due to the sample drying/deposition process. Cryo-TEM imaging of the crystalsome in aqueous solution was then performed to examine the intact morphology of the capsules. As shown in Fig. 2e, the original shape of the PLLA-b-PEG crystalsome in solution is nearly spherical. Similar electron density in the interior of the capsule (area I) and background (area II) suggests that the crystalsome is hollow. To further prove BCCs are hollow and verify the shell thickness, AFM measurement was conducted on the small crystal pieces after breaking the BCCs by ultrasonication (see later discussion). The spherical morphology is similar to our previously reported homopolymer PLLA crystalsomes19. Since PLLA-b-PEG is used in the present case, we coin the name BCCs to highlight the copolymer nature of the structure. The morphology and size of the BCCs resemble those of the spherical polymersomes. Figure 2e also reveals that, unlike most reported polymersomes, these BCCs exhibit relatively rough contour, which is due to polymer crystallization. An enlarged cryo-TEM image of the red box area shows the shell thickness is approximately 2–3 nm, which is attributed to the crystalline PLLA layer. PEG layer is solvated in aqueous solution that constitutes the lighter layer on the exterior of the BCCs of ~12 nm, as the blue arrow pointed. The thickness of the PLLA crystalline shell (2–3 nm) is similar to that of liposomes and much thinner than the hydrophobic core thickness of PLA-b-PEG (Mn = 3.2k−2.8 kg mol−1) polymersomes (e.g. ~10.4 ± 1.4 nm)22.

To understand the crystalline structure of PLLA, wide angle X-ray diffraction (WAXD) experiments were conducted on dried BCC samples at 25 °C (Fig. 2f). The WAXD pattern concludes that orthorhombic α form of PLLA is formed19. The strongest diffraction peak at 16.7° is from (110)/(200) planes of PLLA crystals while the peak at 19.8° is from (203) plane of PLLA and (120) plane of PEG, and the peak at 22°–24° can be attributed to (032) plane of PEG and (210) plane of PLLA19,23. Note that the PEG crystals are formed during BCCs solution drying process. Figure 2g shows a differential scanning calorimetry (DSC) thermogram of the BCCs, where a heating rate of 10 °C min−1 was used. The two peaks in the thermogram can be attributed to the melting of PEG (at 49.0 °C) and PLLA (at 138.9 °C) crystals, respectively. By integrating the PLLA melting peak and using 91 J g−1 as the melting enthalpy value for 100% PLLA α form crystal, the crystallinity of PLLA can be estimated to be 67%24. To further exam the PLLA chain orientation in BCC, selected area electron diffraction (SAED) patterns on individual PLLA-b-PEG BCCs were recorded, and the results are shown in Fig. 2h. PLLA (200) and (110) diffraction spots are observed, suggesting the c-axis and the polymer chains are along the radial direction of the crystalsome. The diffraction spots are arc-shaped, which is attributed to the continuous lattice splay/distortion in order for the single crystal to fit into the curved nano-sized space19,25. The SAED pattern therefore confirms the crystalsome shell is made of single crystal-like lamellae with polymer chains normal to the interface.

To further verify the shell thickness, AFM measurement was conducted on the small crystal pieces after breaking the BCCs by ultrasonication. AFM image and the corresponding cross-sectional height profile (Fig. 3a) shows a total thickness of the shell is ~4.5 nm, including both PEG and PLLA layers. This is significantly thinner than the flat PLLA-b-PEG single crystals (11.1 ± 0.2 nm (n = 10), supplementary Figure 3). Based on the density and molecular weight of each segment, the thickness of PEG and PLLA layer can be estimated to be 2 and 2.5 nm respectively, which is consistent with the cryo-TEM image in Fig. 2c. As the polymer chain folds normal to the crystal surface, and using the molecular weight and the two-chain orthorhombic unit cell of PLLA α form (a = 1.066 nm, b = 0.616 nm, and c = 2.888 nm, Supplementary Note 1) with 103 helical conformation, it can be calculated that each PLLA chain folds nine times, shown in Fig. 3b. The grafting density σ of PEG on the surface can therefore be calculated to be 0.3 PEG chain nm−2. Of interest is that PLLA crystallized into such thin lamellae, which leads to the nine-time fold of the polymer chain. In general polymer crystallization, the crystal thickness is determined by the surface free energy of the crystal folded surface, the heat of fusion, and undercooling of the crystallization process26,27,28. The present case is more complex. In addition to the above-mentioned parameters, entropy loss of the PEG brush upon PLLA crystallization, the molecular weights of the polymer, and the droplet size should all factor in determining the final thickness of the PLLA crystals.

On the basis of PEG chain grafting density, the distance between the anchoring points of the adjacent PEG chains, D, is 1.81 nm (See Supplementary Note 1 for calculation of chain folding number, grafting density and adjacent PEG distance). Flory radius of 5000 g mol−1 PEG in water can be calculated following RFN3/5a29, where a, N and RF are defined as monomer size, the degree of polymerization and Flory radius. In the present case, a = 0.35 nm and N= 11330, and the calculated RF = 5.95 nm, much greater than the adjacent chain distance 1.81 nm29. Therefore, PEG layer in aqueous will take brush conformation, and the brush thickness L can be calculated based on $$L \approx Na^{({5}/{3})}D^{ - ({2}/{3})}$$29. Plugging in the above-mentioned values of N, a, and D, the calculated L is 13.2 nm, which is consistent with the cryo-TEM observation (Fig. 2c). Note that because the distance between the anchoring points of adjacent PEG is directed by PLLA crystallization, the PEG grafting density can be precisely controlled by PLLA chain folding and the lamellar thickness31,32. The spatial distribution of the brush molecules on the surface is extremely uniform due to the crystallization of PLLA, similar to our recently demonstrated polymer brush synthesis using polymer single crystals as the template33. This controlled uniform brush layer may improve the circulating performance of the BCCs, which is discussed in the following sections. We also anticipate that the grafting density can be further tuned by changing polymer molecular weights as well as the crystallization condition as previously reported33, which will be the focus of our future work.

To understand how the PLLA chains crystallize near the liquid−liquid interface, we used molecular simulations to study the nucleation kinetics (simulation details are in Supplementary Methods)34,35. Figure 4a shows the snapshots of the initial PLLA-b-PEG chains located at the curved interface, and the PLLA nuclei at different times, t = 1.0τ, 3.0τ, 5.0τ, 10.0τ, and 40.0τ (here τ is the longest relaxation time of PLLA chains in solution36, Supplementary Figure 5). One can see that at t = 1.0τ, there are some small PLLA nuclei formed near the interface. As time increases, these nuclei continue to grow, and some smaller ones dissolve or are merged into the growing nuclei (see the time evolution of average nucleus number and size in Supplementary Figure 6). Eventually only one single crystal is left in the system (see snapshots at t = 10.0τ and 40.0τ).

To identify the accurate position where the nucleus grows, we calculate the radial distribution of the average nucleus size Rnucleus(d) (see definitions in Supplementary Note 2), here Rnucleus is the radius of a virtual spherical nucleus (see Supplementary Note 2) and d is the distance between the center of mass (CM) of nucleus and the droplet center. Figure 4b shows the variation d of Rnucleus(d) at different t. One can find that from t = 1.0τ to 5.0τ, the nucleus grows at d 94.5~95.5 nm, rather than from the PLLA-b-PEG block junctions at the interface (d 98~100 nm). This slightly off-interface growth can be understood by the radial distribution of average nuclei orientations (see inset of Fig. 4b and definition in Supplementary Note 2). We found that the nuclei are preferred to be vertical to the interface at d 95 nm, while near the interface (d 98~100 nm), they have no preferred orientation. This can be explained as follows: the PLLA chains are stretched vertically to the curved interface due to the high grafting density37, giving rise to a preferred nuclei orientation. However, this orientation would be suppressed near the liquid−liquid interface due to the influence of PEG and water solvents. Therefore, in average, the nuclei are grown in the droplet slightly off the liquid−liquid interface. Eventually, the crystal will cover the whole inner surface of the droplet38, forming a single crystal-like crystalsome similar to Fig. 2e.

### Mechanical property of PLLA-b-PEG BCCs

There are two major methods to characterize the mechanical property of polymer vesicles, namely micropipette aspiration technique and AFM-based nano-indentation39. Due to their small size, the mechanical property of PLLA-b-PEG BCCs was measured via AFM nano-indentation. In the experiment, aqueous solution of PLLA-b-PEG BCCs was drop casted onto a precleaned glass slide and dried under ambient condition. A crystalsome with smooth surface was chosen for the indentation experiment40,41. AFM image and the height profile of the crystalsome were acquired under Tapping Mode, as shown in Fig. 3c inset. The force-deformation curve is shown in Fig. 3c, averaged from 14 times of indentation and the error bars represent standard deviation. After indentation, another AFM image was taken (Supplementary Figure 2) to confirm that the original BCC morphology was not deformed, indicating elastic deformation of the BCC during the indentation experiment. The slope of the fitted line of the deformation portion of the curve was used as the shell stiffness kshell. The Young’s modulus of the dry state PLLA-b-PEG shell can be calculated to be 11.5 GPa42,43. The membrane bending modulus of the BCC shown in Fig. 3 in dry state can therefore be determined to be 9.8×10–17 J (see Supplementary Note 3 for detailed calculation), which is significantly higher than polymersomes or crystalsomes. Note that in aqueous solution, PEG layer would be solvated and will not significantly affect the BCC bending modulus. Therefore the bending modulus of BCCs shell in water can be estimated to be Kbend,wet = 3.63×10−17 J (see Supplementary Note 3 for the calculation). Table 1 summarizes the typical values of sizes and mechanical properties of selected liposomes, polymersomes, homopolymer crystalsomes, BCCs, and viral capsids. It is clear that PLLA-b-PEG BCCs have about 140–8000 times higher bending modulus than polymersomes with much greater thickness, even with a much thinner shell thickness. Thus, BCCs shell would be more stable and more robust under shear flow, suggesting they may provide better protection for the potential cargo inside. Interestingly, BCC shares many features with viral capsid: they are spherical, mechanically strong and resilient. The typical thickness of the viral capsid is between 2 and 5 nm, which is also very close to the present BCC structure, suggesting that BCC might provide an ideal self-assembled capsid-mimic system for desired applications such as drug carriers.

### In vivo circulation and biodistribution studies of BCCs

To test the feasibility of using BCCs for intravenous delivery, in vivo circulation experiments were carried out. A hydrophobic fluorescent dye, 1,1′-dioctadecyl-3,3,3′,3′-tetramethylindodicarbocyanine, 4-chlorobenzenesulfonate salt (DiD) was encapsulated in these BCCs during the crystal growth. DiD has been cited as a marker in a number of blood circulation studies for polymeric nanoparticles6,44. An in vitro control experiment was firstly conducted to confirm if BCCs are leaky. To this end, DiD-encapsulated PLLA-b-PEG BCCs were dispersed in a PBS solution supplemented with 10% fetal bovine serum (FBS). At different time intervals, BCCs were collected, and fluorescent intensity was measured. It was shown that there was minimal fluorescence signal decay (2%) after 5 days of incubation (Supplementary Discussion, Supplementary Figure 8), indicating BCCs are well sealed and nearly impermeable for DiD in this experimental condition. The sealed structure was further demonstrated by the slow release of hydrophilic nitrobenzoxadiazole (NBD)-based dye (~1.7% per 24 h, Supplementary Figure 9). In a separate experiment, BCCs also showed negligible intake of hydrophilic 5-Carboxyfluorescein after 24 h incubation (Supplementary Figure 10). In our in vivo experiments, DiD-encapsulated BCCs with an average size of 200 nm in saline were systemically administered into BALB/c mice through tail vein injection at a dose of 1 mg per mouse. A series of blood samples were collected at various time points post injection. The circulation profiles were obtained by measuring the fluorescence intensity of the sample plasma (Fig. 5a). The blue curve shows the circulation performance of the BCCs crystallized for 7 days. The fluorescence intensity decay follows a classical one-compartment PK model, yielding a long circulation half-life of 24.2 ± 1.4 h (mean ± s.d., n = 5). Remarkably, there are 47, 14 and 8% of BCCs remained in the blood after 24, 72 and 96 h circulation, respectively.

Most polymeric nanoparticles administered intravenously are quickly cleared by the mononuclear phagocyte system45,46. Numerous strategies have been reported to improve nanoparticle blood circulation time. Nanoparticle size, surface PEGylation and mechanical properties have been shown to affect nanoparticle circulation45,46. Figure 5b summarizes the blood circulation apparent half-life and particle retention at 24 h for several reported nanoparticle systems with long circulation lives. Here the apparent half-life is defined as the time for the nanoparticle concentration to fall to half of the original value, and the percentage particle retention at 24 h denotes the fraction of particles retained in plasma 24 h post injection. For example, the reported spherical Poly(ethylene oxide)-b-poly(ethylethylene) (PEO-b-PEE) polymersome has an apparent half-life 15 h with a 24 h retention of ~35%47. Perry et al. reported that with a relatively low PEG brush grafting density, soft hydrogel PRINT nanoparticles showed a half-life 3 h and a 24 h retention of 10%30. Hu et al. coated RBC membranes onto PLGA nanoparticles to bypass in vivo clearance, reaching a 9.6 h apparent half-life with 29% retention at 24 h6.

Compared to the above-mentioned leading polymeric nanoparticle carriers, BCCs show an impressive half-life of 24.2 h and a 24 h retention of 47%. Furthermore, most nanoparticles investigated in these previous studies are rather small with an average size of 90–100 nm (except for PRINT nanoparticle, which has a dimension of 80 × 80 × 320 nm). It is known that particle size is a key factor for long circulation. Larger nanoparticles of 171 and 243 nm were reported to get cleared in blood twice as fast as that of smaller nanoparticles (80 nm)46,48. Given the relative large size of the BCCs, it is even more intriguing to observe the long circulating time value of the present system. Furthermore, previous studies showed that polymer crystallization reduced blood circulation of polymersomes and cylindrical polymer brushes, which is apparently not the case in BCCs15,49. To better understand the mechanism of the observed long circulation time of BCCs, we investigated the circulation behaviors of BCCs that were crystallized for shorter periods of time, e.g. 3 days and 5 days. The results are also plotted in Fig. 5a, which shows that BCCs of shorter crystallization time (3-day and 5-day) exhibit much faster clearance in the blood yet 5-day crystallization time yields a blood retention better than 3-day crystallization. Fitted with the one-compartment model, BCCs after 3-day and 5-day crystallizations have half-lives of 0.80 ± 0.46 h (n = 4) and 3.3 ± 0.68 h (n = 3), respectively. Figure 5c summarizes the change of half-lives with increasing crystallization time. DLS measurement (Supplementary Figure 11a) confirmed that all the BCCs have similar hydrodynamic radii and size distribution. Supplementary Figure 11c, d demonstrate that morphologies of 3-day and 5-day crystallized BCCs also maintained capsule-like structures with similar particle sizes. Interestingly, crystallinity calculated from DSC heating thermograms (Supplementary Figure 11b) illustrated shorter crystallization time rendering lower crystallinity (18.1, 45.8 and 67% for 3, 5, and 7 days of crystallization, respectively), which is also plotted in Fig. 5c. Combining all these results, we can conclude that there is a close correlation between the BCC crystallinity and the blood circulation time, shown in Fig. 5d. The ultra-long circulation time of the 7-day crystallized BCCs arises from the high crystallinity and uniform crystalline chain packing on the curved BCC shells which minimize defect formation in the crystals. In 3-day, 5-day crystallized BCCs and the previously reported polymersome cases, relatively poorly controlled crystals lead to defect-rich particles, which may be prone to disassembly under blood flow. Furthermore, the long circulation may also be facilitated by the uniform PEG brushes formed by crystallization-induced brush-formation. As we recently reported, BCP crystallization-templated polymer brushes are highly tunable and extremely uniform polymer brushes with minimal defects. However, in reported nanoparticle circulation studies, PEG layers are typically formed by grafting-to methods, and are not uniform due to the steric hindrance of the macromolecular chemistry33.

Nanoparticle distribution in organs was investigated for up to 3 days via IVIS imaging and homogenization (Fig. 6a, b). The relative numbers of PLLA-b-PEG BCCs in the blood over 3 days were consistent with the circulation data presented in Fig. 5a that the amount of BCCs in the blood was halved every day, which follows the one-compartment model formula $${{C}}\left( {{t}} \right) = {{C}}({\boldsymbol{t}}_0) \cdot {{e}}^{ - {{k}} \cdot {{t}}_{1/2}}$$50. With respect to distributions in other organs, the BCCs primarily accumulated to liver and spleen, which are organs of the reticuloendothelial system (RES). Thus, BCCs were mainly sequestered by the liver in such a time frame, which is consistent with the recent understanding on how hard nanomaterials are cleared by the liver51. The PLLA-b-PEG BCCs accumulation in the liver and spleen increased with time, suggesting that the blood fluorescence mainly arises from the dyes in BCCs rather than the leakage of the dye. In the latter case, the dye would be secreted by kidneys, leading to the decrease of fluorescence signal from the liver6.

Polymeric vesicles have been shown to accumulate in the liver47. The uptake of nanoparticles by hepatic macrophages, Kupffer cells may be reduced when the liver-specific opsonin absorption is minimal52. Besides liver, the PLLA-b-PEG BCCs exhibited a high accumulation in the spleen up to 72 h. Feijen et al. reported that polymersomes with a size of 95 nm primarily accumulated in the liver whereas maintained a very low uptake amount in the spleen from 24 to 72 h53. PLLA-b-PEG BCCs interestingly showed a primary and increasing accumulation over time in the spleen probably due to their relatively larger sizes. It was reported that nanoparticles with size beyond 150 nm are more likely to get entrapped within the liver and spleen54. Large stealth liposomes (>200 nm) also showed a significant accumulation in the spleen due to the mechanical filtration in addition to phagocytosis55. Application of nanocarriers has long been restricted by the available choices of particle size, while the optimal size was considered to be 70–150 nm54,56. PLLA-b-PEG BCCs showed that large particles with the size of ~200 nm circulated up to 96 h in the blood, which opens the door for medical applications of large nanoparticles (~200 nm). Furthermore, the hollow structure is advantageous for potential delivery applications since (1) it provides space to encapsulate a large number of drugs at a level that is difficult to achieve by other drug carriers; (2) minimal amount of polymer materials is used in a capsule; and (3) these hollow capsules also provide large surface area to mass ratio. Future research will be focused on better controlling the structure, morphology, size distribution and surface function of the BCCs for targeted applications.

## Discussion

In conclusion, we demonstrated the preparation of robust BCCs for long blood circulation. The emulsion-solution crystallization method is efficient to guide polymer chain folding into uniform crystalline packing at curved liquid/liquid interface to form single crystal-like structure. As a BCP ensemble, BCCs exhibit superior mechanical stability, suggesting that tailoring crystallization is a route to prepare robust BCP vesicles. In vivo circulation tests demonstrate that the BCCs can circulate up to 96 h in the blood with a half-life of 24.2 ± 1.4 h, and 47% retention at 24 h post injection. This excellent circulation performance was attributed to controlled crystallization of PLLA and the resultant uniform PEG brush layer on the BCC surfaces. Our observation is different to the previous perception that crystallization reduces polymersome circulation, providing a strategy to generate long circulating nanomaterials. We envisage that the hollow, robust, tunable BCCs could lead to a new class of nanoparticle carriers for drug delivery and gene therapy.

## Methods

### Materials and animals

Poly (l-lactide)-block-poly (ethylene glycol) (PLLA-b-PEG, Mn = 6000–5000 g mol−1) was purchased from Polymer Source Inc. 1,1-dioctadecyl-3,3,3,3-tetramethylindocarbocy amine perchlorate (DiD oil) was purchased from Life Technologies. Toluene and NaCl were purchased from Sigma Aldrich. All materials were used as received. Female BALB/c mice were purchased from Charles River Laboratory.

### Preparation of PLLA-b-PEG block copolymer crystalsomes (BCCs)

22 mg PLLA-b-PEG and 12 µg of fluorescent dye (DiD) were first dissolved in 0.4 g toluene in a glass tube. Then, 16 g DI water was added into the above polymer solution at 95 °C. After emulsification at 95 °C for 2 min via probe sonication, the emulsion was kept at 95 °C for another 30 s before quenched to 25 °C for crystallization. After crystallization for 3–9 days, the solution was dialyzed against DI water through 50 nm membranes at 25 °C for 4–6 h, and the procedure was repeated for five times before the sample was collected through a 0.45 µm syringe filter.

Before in vivo study, the above-mentioned BCCs aqueous solution was further dialyzed again saline (0.9 w/v% NaCl aqueous solution) overnight and then concentrated with 30 K molecular weight cutoff (MWCO) Amicon Ultra-4 Centrifugal filters. Gas chromatography experiments showed no detectable amount of toluene in the BCC samples (See Supplementary Methods, Supplementary Figures 12, 13).

### Characterization of PLLA-b-PEG BCCs

Hydrodynamic radius were measured by DLS using Zetasizer Nano ZS90. SEM images were taken on a ZEISS Supra 50VP microscope with a 1 kV accelerating voltage. To prepare SEM samples, a drop of 10 µl BCCs aqueous solution was cast onto cover slides and then dried under vacuum overnight. Before SEM imaging, the sample was coated with Pt/Pd.

TEM bright field imaging and SAED experiments were conducted using a JEOL JEM2100 microscope with a 120 kV accelerating voltage. TEM samples were prepared by drop casting BCCs’ aqueous solution onto a carbon-coated Cu grid. Cryogenic-transmission electron microscopy (cryo-TEM) was performed on a FEI Talos F200C TEM (University of Delaware, DE). A vitrified sample was prepared with an FEI Vitrobot apparatus57,58. The vitrified samples were transferred to a cryoholder in a sample stage immersed in liquid nitrogen. The cryoholder was kept below –170 °C during the imaging to prevent sublimation. The digital images were recorded by a Talos F200C TEM equipped with a FEI Falcon direct electron detector.

AFM images and force spectra were acquired using a Bruker Dimension Icon AFM equipped with a tapping mode and PeakForce mode. Samples were dried on piranha-cleaned cover slide. The cantilever used is Bruker TESPA with tip height of 10–15 μm, and tip radius of 8 nm. The spring constant of the cantilever is 2.030 N m1, calibrated by the thermal tune method. DSC experiments were conducted on DSC Q2000 with Tzero pans from TA Instruments with a 10 °C min1 heating rate.

### Monte Carlo simulation

We use a coarse-grained lattice model to study the nucleation kinetics of PLLA chains near the curved liquid−liquid interface. The PLLA-b-PEG chain is modeled as a diblock copolymer of A38 B28, with A and B corresponding to the PEG and PLLA monomers, and the total monomers in one chain is N = 66. The curved liquid−liquid interface is set up in prior in the simulation box of 100 × 100 × 99 nm3, then PLLA-b-PEG chains are relaxed in this interface. The total chain number is chosen as n = 3000, calculated from the experimental grafting density 0.3 chains per nm2. The polymer chains are moved via a micro-relaxation model34, which allows each segment to change positions with its neighboring solvent sites, accompanied by the sliding diffusion along the chain direction if necessary35. Conventional metropolis sampling was employed in each micro-relaxation step. The reduced temperature is set as kBT/Ec = 3.6, and other parameters are summarized in Supplementary Note 2. Information.

### In vitro release study

PLLA-b-PEG BCCs labeled with DiD was dispersed in a 10% FBS PBS solution. The mixture was shaken at 100  rpm at 37  °C. At each time interval, BCCs were collected with an MWCO 100  K (Amicon Ultra-4) tube with centrifugation. Equal volume of 10% FBS in PBS was used to resuspend BCCs. The fluorescent intensity was measured at an excitation/emission wavelength of 600/665  nm by a microplate reader (Infinite M200, TECAN) and compared with the initial intensity for quantification.

### In vivo circulation study

PLLA-b-PEG BCCs labeled with DiD in saline was systemically administered through tail vein injection. Each female BALB/c mouse was slowly injected with 100 μL 10 mg mL−1 of NP solution. A small volume of 10 µL of blood was collected at 2 min, 15 min, 0.5 h, 1 h, 2h , 4 h, 8 h, 24 h, 48 h and up to 96 h post i.v. injection. The blood was diluted in 200 μL of heparin/PBS (16 U mL1) solution to avoid blood coagulation. The samples were centrifuged at 300 × g for 5 min to remove blood cells, and then 180 µL of the supernatant was collected for measurement at excitation/emission wavelength of 600/665 nm by a microplate reader (Infinite M200, TECAN). One-compartment pharmacokinetics model was used to calculate in vivo circulation half-lives via PKSolver49. All animal procedures were conducted according to the protocols of the Committee on Animal Care of Drexel in compliance with NIH guidelines.

### In vivo biodistribution study

Female Balb/c mice at 8 weeks old were randomly separated into three groups and were i.v. injected with 150 μL of DiD-labeled PLLA-b-PEG BCCs at 10 mg mL1 on days 1, 2, and 3 respectively. The control group was injected with the same amount of saline. On day 4, all the mice were sacrificed and their brains, lungs, hearts, livers, spleens, kidneys as well as blood were collected. To quantify the amount of PLLA-b-PEG BCCs in each organ, all the organs were weighted and homogenized. The fluorescence intensities of DiD-containing homogenized solution were detected at an excitation/emission wavelength of 600/665 nm by a microplate reader (Infinite M200, TECAN).

### Data availability

The data are available from the corresponding author upon reasonable request.

### Code availability

The simulation code is available from the corresponding author upon request.

## References

1. 1.

Noguchi, H. & Gompper, G. Shape transitions of fluid vesicles and red blood cells in capillary flows. Proc. Natl. Acad. Sci. USA 102, 14159–14164 (2005).

2. 2.

Michel, J. P. et al. Nanoindentation studies of full and empty viral capsids and the effects of capsid protein mutations on elasticity and strength. Proc. Natl. Acad. Sci. USA 103, 6184–6189 (2006).

3. 3.

Ivanovska, I. L. et al. Bacteriophage capsids: tough nanoshells with complex elastic properties. Proc. Natl Acad. Sci. USA 101, 7600–7605 (2004).

4. 4.

Merkel, T. J. et al. Using mechanobiological mimicry of red blood cells to extend circulation times of hydrogel microparticles. Proc. Natl Acad. Sci. USA 108, 586–591 (2011).

5. 5.

Rodriguez, P. L. et al. Minimal “self” peptides that inhibit phagocytic clearance and enhance delivery of nanoparticles. Science 339, 971–975 (2013).

6. 6.

Hu, C. M. J. et al. Erythrocyte membrane-camouflaged polymeric nanoparticles as a biomimetic delivery platform. Proc. Natl Acad. Sci. USA 108, 10980–10985 (2011).

7. 7.

Xu, L. et al. Systemic tumor-targeted gene delivery by anti-transferrin receptor scFv-immunoliposomes. Mol. Cancer Ther. 1, 337–346 (2002).

8. 8.

Akhtar, S. & Benter, I. F. Nonviral delivery of synthetic siRNAs in vivo. J. Clin. Invest. 117, 3623–3632 (2007).

9. 9.

Discher, B. M. et al. Polymersomes: tough vesicles made from diblock copolymers. Science 284, 1143–1146 (1999).

10. 10.

Discher, D. E. & Eisenberg, A. Polymer vesicles. Science 297, 967–973 (2002).

11. 11.

O’Reilly, R. K., Hawker, C. J. & Wooley, K. L. Cross-linked block copolymer micelles: functional nanostructures of great potential and versatility. Chem. Soc. Rev. 35, 1068–1083 (2006).

12. 12.

Ahmed, F., Hategan, A., Discher, D. E. & Discher, B. M. Block copolymer assemblies with cross-link stabilization: from single-component monolayers to bilayer blends with PEO− PLA. Langmuir 19, 6505–6511 (2003).

13. 13.

Vilgis, T. & Halperin, A. Aggregation of coil crystalline block copolymers—equilibrium crystallization. Macromolecules 24, 2090–2095 (1991).

14. 14.

Van Horn, R. M. et al. Solution crystallization behavior of crystalline−crystalline diblock copolymers of poly(ethylene oxide)-block-poly(ε-caprolactone). Macromolecules 43, 6113–6119 (2010).

15. 15.

Rajagopal, K. et al. Curvature-coupled hydration of semicrystalline polymer amphiphiles yields flexible worm micelles but favors rigid vesicles: polycaprolactone-based block copolymers. Macromolecules 43, 9736–9746 (2010).

16. 16.

Meng, G., Paulose, J., Nelson, D. R. & Manoharan, V. N. Elastic instability of a crystal growing on a curved surface. Surf. Sci. 343, 634–637 (2014).

17. 17.

Garcia, N. A., Pezzutti, A. D., Register, R. A., Vega, D. A. & Gomez, L. R. Defect formation and coarsening in hexagonal 2D curved crystals. Soft Matter 11, 898–907 (2015).

18. 18.

Bausch, A. R. et al. Grain boundary scars and spherical crystallography. Science 299, 1716–1718 (2003).

19. 19.

Wang, W. et al. Highly robust crystalsome via directed polymer crystallization at curved liquid/liquid interface. Nat. Commun. 7, 10599 (2016).

20. 20.

Katre, N. V. The conjugation of proteins with polyethylene glycol and other polymers: altering properties of proteins to enhance their therapeutic potential. Adv. Drug Deliv. Rev. 10, 91–114 (1993).

21. 21.

Staub, M. C. & Li, C. Y. Confined and directed polymer crystallization at curved liquid/liquid interface, Macrom. Chem. Phys. 219, 1700455 (2018).

22. 22.

Ahmed, F. & Discher, D. E. Self-porating polymersomes of PEG–PLA and PEG–PCL: hydrolysis-triggered controlled release vesicles. J. Control Rel. 96, 37–53 (2004).

23. 23.

Cheng, S., Smith, D. M. & Li, C. Y. How does nanoscale crystalline structure affect ion transport in solid polymer electrolytes? Macromolecules 47, 3978–3986 (2014).

24. 24.

Wunderlich, B. Thermal Analysis of Polymeric Materials (Springer, Berlin Heidelberg, 2005).

25. 25.

Li, C. Y. et al. Double twist in helical polymer “soft” crystals. Phys. Rev. Lett. 83, 4558–4561 (1999).

26. 26.

Wunderlich B. Macromolecular Physics (Academic Press, New York, 1976).

27. 27.

Li, B. & Li, C. Y. Immobilizing Au nanoparticles with polymer single crystals, patterning and asymmetric functionalization. J. Am. Chem. Soc. 129, 12–13 (2007).

28. 28.

Li, C. Y. Polymer single crystal meets nanoparticles. J. Poly. Sci. Poly. Phys. 47, 2436–2440 (2009).

29. 29.

De Gennes, P. G. Conformations of polymers attached to an interface. Macromolecules 13, 1069–1075 (1980).

30. 30.

Perry, J. L. et al. PEGylated PRINT nanoparticles: the impact of PEG density on protein binding, macrophage association, biodistribution, and pharmacokinetics. Nano Lett. 12, 5304–5310 (2012).

31. 31.

Chen, W. Y. et al. Onset of tethered chain overcrowding. Phys. Rev. Lett. 93, 028301 (2004).

32. 32.

Xiong, H. et al. Scrolled polymer single crystals driven by unbalanced surface stresses: rational design and experimental evidence. Macromolecules 44, 7758–7766 (2011).

33. 33.

Zhou, T., Qi, H., Han, L., Barbash, D. & Li, C. Y. Towards controlled polymer brushes via a self-assembly-assisted-grafting-to approach. Nat. Commun. 7, 11119 (2016).

34. 34.

Hu, W. & Frenkel, D. Polymer crystallization driven by anisotropic interactions. In Interphases and Mesophases in Polymer Crystallization III (eds Allegra, G.) (Springer, Berlin, Heidelberg, 2005).

35. 35.

Tang, Q., Hu, W. & Napolitano, S. Slowing down of accelerated structural relaxation in ultrathin polymer films. Phys. Rev. Lett. 112, 148306 (2014).

36. 36.

Müller, M. & Daoulas, K. C. Single-chain dynamics in a homogeneous melt and a lamellar microphase: a comparison between Smart Monte Carlo dynamics, slithering-snake dynamics, and slip-link dynamics. J. Chem. Phys. 129, 164906 (2008).

37. 37.

Zha, L. & Hu, W. Molecular simulations of confined crystallization in the microdomains of diblock copolymers. Prog. Polym. Sci. 54, 232–258 (2016).

38. 38.

Hu, W. The physics of polymer chain-folding. Phys. Rep https://doi.org/10.1016/j.physrep.2018.04.004 (2018).

39. 39.

Jaskiewicz, K., Makowski, M., Kappl, M., Landfester, K. & Kroeger, A. Mechanical properties of poly(dimethylsiloxane)-block-poly(2-methyloxazoline) polymersomes probed by atomic force microscopy. Langmuir 28, 12629–12636 (2012).

40. 40.

Vaziri, A. & Mahadevan, L. Localized and extended deformations of elastic shells. Proc. Natl Acad. Sci. USA 105, 7913–7918 (2008).

41. 41.

Vaziri, A. Mechanics of highly deformed elastic shells. Thin Wall Struct. 47, 692–700 (2009).

42. 42.

Reissner, E. Stresses and small displacements of shallow spherical shells. I. J. Math. Phys. 25, 80–85 (1946).

43. 43.

Wang, W. D., Staub, M. C., Zhou, T., Smith, D. M., Qi, H., Laird, E. D., Cheng, S. & Li, C. Y. Polyethylene nano crystalsomes formed at a curved liquid/liquid interface, Nanoscale 10, 268-276 (2018).

44. 44.

Zhou, H. et al. Hyaluronidase embedded in nanocarrier PEG shell for enhanced tumor penetration and highly efficient antitumor efficacy. Nano Lett. 16, 3268–3277 (2016).

45. 45.

Hrkach, J. et al. Preclinical development and clinical translation of a PSMA-targeted docetaxel nanoparticle with a differentiated pharmacological profile. Sci. Transl. Med. 4, 128ra39 (2012).

46. 46.

Alexis, F., Pridgen, E., Molnar, L. K. & Farokhzad, O. C. Factors affecting the clearance and biodistribution of polymeric nanoparticles. Mol. Pharm. 5, 505–515 (2008).

47. 47.

Photos, P. J., Bacakova, L., Discher, B., Bates, F. S. & Discher, D. E. Polymer vesicles in vivo: correlations with PEG molecular weight. J. Control Rel. 90, 323–334 (2003).

48. 48.

Fang, C. et al. In vivo tumor targeting of tumor necrosis factor-alpha-loaded stealth nanoparticles: effect of MePEG molecular weight and particle size. Eur. J. Pharm. Sci. 27, 27–36 (2006).

49. 49.

Mullner, M. et al. Size and rigidity of cylindrical polymer brushes dictate long circulating properties in vivo. ACS Nano 9, 1294–1304 (2015).

50. 50.

Zhang, Y., Huo, M., Zhou, J. & Xie, S. PKSolver: an add-in program for pharmacokinetic and pharmacodynamic data analysis in Microsoft Excel. Comput. Methods Prog. Biomed. 99, 306–314 (2010).

51. 51.

Tsoi, K. M. et al. Mechanism of hard-nanomaterial clearance by the liver. Nat. Mater. 15, 1212–1221 (2016).

52. 52.

Stolnik, S., Illum, L. & Davis, S. S. Long circulating microparticulate drug carriers. Adv. Drug Deliv. Rev. 64, 290–301 (2012).

53. 53.

Lee, J. S. et al. Circulation kinetics and biodistribution of dual-labeled polymersomes with modulated surface charge in tumor-bearing mice: comparison with stealth liposomes. J. Control Rel. 155, 282–288 (2011).

54. 54.

Blanco, E., Shen, H. & Ferrari, M. Principles of nanoparticle design for overcoming biological barriers to drug delivery. Nat. Biotechnol. 33, 941–951 (2015).

55. 55.

Moghimi, S. M., Hedeman, H., Muir, I. S., Illum, L. & Davis, S. S. An investigation of the filtration capacity and the fate of large filtered sterically-stabilized microspheres in rat spleen. Biochim. Biophys. Acta 1157, 233–240 (1993).

56. 56.

Wang, J. et al. The role of micelle size in tumor accumulation, penetration, and treatment. ACS Nano 9, 7195–7206 (2015).

57. 57.

Ni, B. et al. Pathway toward large two-dimensional hexagonally patterned colloidal nanosheets in solution. J. Am. Chem. Soc. 137, 1392–1395 (2015).

58. 58.

Percec, V. et al. Modular synthesis of amphiphilic Janus glycodendrimers and their self-assembly into glycodendrimersomes and other complex architectures with bioactivity to biomedically relevant lectins. J. Am. Chem. Soc. 135, 9055–9077 (2013).

59. 59.

Liang, X., Mao, G. & Simon, Ng. K. Y. Probing small unilamellar EggPC vesicles on mica surface by atomic force microscopy. Colloid Surf. B 34, 41–51 (2004).

60. 60.

Park, J. W. Sulfatide incorporation effect on mechanical properties of vesicles. Colloid Surf. B 80, 59–62 (2010).

61. 61.

Roos, W. H., Bruinsma, R. & Wuite, G. J. L. Physical virology. Nat. Phys. 6, 733–743 (2010).

62. 62.

Kol, N. et al. Mechanical properties of murine leukemia virus particles: effect of maturation. Biophys. J. 91, 767–774 (2006).

## Acknowledgements

This work was supported by the National Science Foundation Grant DMR-1308958 and DMR 1709136. C.Y.L. and H.C. are grateful for the support of Drexel DARE and PA Department of Health, CURE grant programs. H.C. acknowledges the support from National Institute of Allergy and Infectious Diseases of the National Institutes of Health under Award Number R21AI133372. Q.T. acknowledges the financial support from the Deutsche Forschungsgemeinschaft under grant Mu1674/15-1. The simulations are performed at GWDG Göttingen.

## Author information

Authors

### Contributions

H.Q., H.Z., H.C. and C.Y.L. designed the research; H.Q., T.Z., S.M., S.K. and M.C.S. fabricated and characterized crystalsomes; J.Y.L. and D.J.P. performed the cryo-TEM work; H.Q. and L.H. conducted the AFM indentation measurements; Q.T. and W.H. performed the simulations; H.Z., Z.F. and H.C. conducted the in vivo circulation and biodistribution study. H.Q., H.Z., H.C. and C.Y.L. wrote the paper.

### Corresponding authors

Correspondence to Hao Cheng or Christopher Y. Li.

## Ethics declarations

### Competing interests

The authors declare no competing interests.

Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

## Rights and permissions

Reprints and Permissions

Qi, H., Zhou, H., Tang, Q. et al. Block copolymer crystalsomes with an ultrathin shell to extend blood circulation time. Nat Commun 9, 3005 (2018). https://doi.org/10.1038/s41467-018-05396-x

• Accepted:

• Published:

• ### Molecular simulations of microscopic mechanism of the effects of chain length on stereocomplex formation in polymer blends

• Ying Xu
• , Haitao Wu
• , Jun Yang
• , Rongjuan Liu
• , Zhiping Zhou
• , Tongfan Hao
•  & Yijing Nie

Computational Materials Science (2020)

• ### Engineering long-circulating nanomaterial delivery systems

• Zhiyuan Fan
• , Pu Zhu
• , Yucheng Zhu
• , Kevin Wu
• , Christopher Y Li
•  & Hao Cheng

Current Opinion in Biotechnology (2020)

• ### Directed Nanoparticle Assembly through Polymer Crystallization

• Shan Mei
• , Mark Staub
•  & Christopher Y. Li

Chemistry – A European Journal (2020)

• ### Formation of 2D and 3D multi-tori mesostructures via crystallization-driven self-assembly

• Gerald Guerin
• , Menandro Cruz
•  & Qing Yu

• ### Multistimuli-responsive PEGylated polymeric bioconjugate-based nano-aggregate for cancer therapy

• Kai Chen
• , Shuangsi Liao
• , Shiwei Guo
• , Xiuli Zheng
• , Bing Wang
• , Zhenyu Duan
• , Hu Zhang
• , Qiyong Gong
•  & Kui Luo

Chemical Engineering Journal (2020)