To combine the advantages of ultrafast femtosecond nano-optics with an on-chip communication scheme, optical signals with a frequency of several hundreds of THz need to be down-converted to coherent electronic signals propagating on-chip. So far, this has not been achieved because of the overall slow response time of nanoscale electronic circuits. Here, we demonstrate that 14 fs optical pulses in the near-infrared can drive electronic on-chip circuits with a prospective bandwidth up to 10 THz. The corresponding electronic pulses propagate in macroscopic striplines on a millimeter scale. We exploit femtosecond photoswitches based on asymmetric, nanoscale metal junctions to drive the pulses. The non-linear ultrafast response is based on a plasmonically enhanced, multiphoton absorption resulting in a field emission of ballistic hot electrons propagating across the nanoscale junctions. Our results pave the way towards femtosecond electronics integrated in wafer-scale THz circuits.
Recent work on the photoemission at sharp metal tips in vacuum suggests that the electron emission process can be separated into different regimes, starting with a multiphoton emission for moderate optical fields1,2,3,4, and two limiting cases of the so-called strong-field photoelectron emission5,6,7. The latter two are characterized by the electron quiver amplitude which is either smaller (quiver regime) or larger (sub-cycle photoemission regime) than the characteristic decay length of the optical near-field at the metal surfaces5,6,7. Photoemission processes at moderate optical fields have also been shown to be capable of driving ultrafast currents in nanoscale circuits defined on substrates8,9,10. In all cases, the electron emission can be significantly increased by plasmonic effects, for instance, in resonant plasmonic nanostructures such as bowtie antennas9,10,11,12,13,14. However, driving a dc unipolar current in such nanostructures requires a symmetry breaking of the spatio-temporal electron dynamics15,16. For nanostructures, this has been achieved by using few-cycle femtosecond pulses for the optical excitation8,9 or by applying strong dc electric fields at the emitter electrodes10. The electrodynamic symmetry breaking also favors optical rectification processes, which are typically detectable at the lowest optical intensities for metallic nanostructures13,14.
Here, we show that by using asymmetric plasmonic nanojunctions instead of symmetric ones, we are able to achieve the required symmetry breaking to induce a unipolar photoemission of hot electrons without applying a voltage at moderate optical intensities of near-infrared (NIR) femtosecond pulses. Our findings suggest that the detected non-linear photoemission currents comprise electrons traveling ballistically across the nanojunctions in vacuum. At the lowest optical intensities, our results are consistent with an optical rectification process at the metallic surfaces. Most importantly, we verify that the demonstrated technology can be utilized for ultrafast photoswitches driving on-chip THz circuits. We prove a coherent propagation of corresponding on-chip THz transients by an Auston switch technology17. The ultimate switching time in the asymmetric nanojunctions is limited by the laser pulse duration and the time of flight of the ballistic electrons, which was reported to be as fast as 900 as for a 8 nm junction gap9. This (sub-) femtosecond timescale outperforms known Auston photoswitch technologies based on non-radiative carrier capture sites in semiconductors by two orders of magnitude17,18,19,20,21,22,23. Our work reveals that the photoemission dynamics in asymmetric nanojunctions allow to convert a femtosecond NIR-optical pulse into a coherent on-chip signal in the THz range. In this respect, we expand on-chip electronics from GHz up to several THz into the so-called THz Gap between electronic and optical applications24. The THz pulses are driven by the non-linear photoemission response of the asymmetric nanojunctions, and are coupled into macroscopic co-planar striplines by near-field interactions. The on-chip signal propagation along the striplines extends up to several hundreds of micrometers. Insofar, we show that femtosecond electronics based on asymmetric nanoscale junctions may prove useful for on-chip clock and synchronization dynamics up to 10 THz and to realize a macroscopic on-chip signal transduction on a femtosecond timescale. For the few-femtosecond control pulses, we utilize a compact Er:fiber technology25, such that the demonstrated coherent electronics is fully telecom compatible.
Asymmetric nanojunctions centered in THz stripline circuits
We fabricate asymmetric nanojunctions by focused-ion beam (FIB) milling of a 35 nm thick Au layer on a sapphire substrate with 2 nm Ti as an adhesion layer. Each nanojunction consists of a triangular-shaped emitter (‘E’) electrode and a plane collector (‘C’) electrode separated by a vacuum gap with a distance of dgap ~ 90 nm (Fig. 1a). The nanojunctions are positioned in between two co-planar THz striplines made from Ti/Au with the emitter and the collector electrodes directly connected to the striplines (Fig. 1b). We use NIR broadband pulses with a photon energy Epump = (0.9–1.3) eV as an excitation of a photocurrent (cf. Supplementary Fig. 1). The time-integrated photocurrent Iemission is measured between the striplines at zero bias (Vbias = 0 V) (Fig. 1c). For time-resolved measurements, an additional NIR probe pulse at Eprobe = 1.59 eV with a pulse duration of 100 fs full width at half maximum (FWHM) triggers a semiconductor photoswitch for the electronic read-out with a switching time of about 500 fs21,22,23. All measurements are performed at 77 K in vacuum.
Figure 1b depicts a scanning electron microscope (SEM) image of the striplines with the nanojunctions located in the center. The graph is overlaid with a map of Iemission of the same area. We find that the maximum current is located at the position of the nanojunctions (cf. Supplementary Fig. 2). The photocurrent Iemission is unipolar, and its polarity is such that electrons propagate from the emitter to the collector with an amplitude of 360 fA. We note that the spatial extension of Iemission is significantly smaller than the laser spot of ~7.5 µm (FWHM) (cf. Supplementary Fig. 2) pointing towards a super-linear intensity dependence. Consistently, Fig. 1d shows that Iemission follows a power law (Epulse)β with a fitted power coefficient in the range of 2 ≤ β ≤ 3 for the investigated samples. Such coefficients are typically explained by multiphoton processes as discussed below1,2,3,4,6,7,9,10,13,14,16.
We use an SF10-prism compressor to control the temporo-spatial shape of the pump pulse and a second-harmonic generation frequency-resolved optical gating technique (SHG-FROG) for its characterization26. The upper panels of Fig. 1e show the second-harmonic-intensity Îshg-frog vs time delay for three different compressor settings. Gaussian fits yield a FWHM between 19 fs (triangle) and 26 fs (circle), up to ~27 fs for non-Gaussian pulses (square). The width of the shortest pulse (triangle) translates to a temporal FWHM of 14 fs (cf. Supplementary Fig. 1). The lower panel of Fig. 1e shows the corresponding emission current Iemission across the asymmetric nanojunctions for the investigated range of compressor positions. We observe a maximum Iemission for the shortest laser pulses, while the pulse energy is constant for all compressor positions (Epulse = 150 pJ). Figure 1e demonstrates that Iemission depends predominantly on the electric field of the impinging photons instead of the average laser intensity.
Photoemission processes in the nanojunctions
For the highest Epulse = 320 pJ and a Gaussian pulse length τpulse = 14 fs, we estimate the peak electric field of the pump laser pulse to be Fpump = 0.5 V nm−1 in open space. For this electric field strength, Fig. 2a shows the corresponding schematic energy diagram of a gold-vacuum interface (black line). As depicted by the colored lines, the potential barrier is reduced by the Schottky effect to
with Wgold = 5.1 eV the work function of gold, ε0 the vacuum permittivity, e the electron charge, and g the field-enhancement factor. For instance, we compute Wbarrier = 3.2 eV according to Eq. (1) for g = 5 at the emitter tips. Figure 2b shows a close-up SEM image of the emitter and collector structure. For Epump = 1.3 eV, we numerically calculate a (resonant) plasmonic field-enhancement factor in the range up to g ~9 at the tips of the emitter, while at the collector g < 4 (cf. inset of Fig. 2b and Supplementary Fig. 3). This asymmetry of the nanojunctions favors the photoemission of electrons from the emitter to the collector, which explains the unipolar amplitude of Iemission in our experiments. As is typical for such plasmonic nanojunctions, their extinction strongly depends on the polarization of the exciting laser field. Indeed, we find a maximum extinction for the linear optical polarization aligned along the tips of the emitters in agreement with a dominant dipolar excitation. Consistently, the emission current Iemission follows this polarization dependence (cf. Fig. 2c).
For the highest laser field of Fpump = 0.5 V nm−1, the so-called Keldysh parameter γ can be estimated to be 2.1 for g = 9 and 5.5 for g = 4 in our experiment27. Both values suggest that the multiphoton absorption is the dominating mechanism in our asymmetric nanojunctions for the given laser pulses6,7,13,14, and strong-field photoelectron emission processes are negligible (horizontal dashed arrow in Fig. 2a)5. The absorption of multiple photons with a combined energy of Emultiphoton = β · Epump = (1.8 – 3.9) eV is consistent with the sketched barrier heights in Fig. 2a (vertical, dashed dotted arrow). Moreover, it nicely explains the measured power coefficient β in Fig. 1d. We note that the amplitude of Iemission translates to only ~0.08 electrons emitted per optical pulse in average, which suggests that Coulomb repulsion and electron interference effects are negligible during the photoemission process6,7,16.
Ultrafast coherent on-chip THz pulses
In the next step, we show that Iemission can drive THz pulses in stripline circuitries as sketched in Fig. 1c. After the excitation of the nanojunctions, the THz pulses run along the striplines up to several hundreds of micrometers, and are detected on-chip by the time-delayed optical probe pulse in combination with a semiconductor Auston switch17,21,22,23. The latter is made from ion-implanted amorphous silicon with a sub-picosecond (~500 fs) time resolution21,22,23. The resulting current Itransient across the Auston switch is sampled as a function of the time delay Δt between the pump and the probe pulse (Fig. 3a). Importantly, we find a non-linear power dependence of Itransient vs Epulse with respect to the pump laser, when the nanojunctions are optically excited (Fig. 3b). The observed power law coefficient β is consistent with the one deduced for Iemission for our junctions (Fig. 1d), which demonstrates that the signal Itransient is a global read-out of Iemission along the striplines.
Generally, the signal Itransient, as measured at the Auston switch, is directly proportional to the electric field component of the THz pulse as it propagates along the striplines with macroscopic dimensions (Fig. 3c)17,18,28. The dispersion of the striplines allows the propagation of signals up to several THz (Fig. 3d), before losses, predominantly to the Al2O3-substrate, set in29. Assuming an initial Gaussian THz pulse at the position of the nanojunctions, we accordingly calculate its time and space evolution along the striplines29. At the position of the semiconducting Auston switch, the computed pulse agrees well with the measured Itransient (red line in Fig. 3a). We note that in this calculus, the propagating THz pulse is convoluted with the (much slower) read-out time of the semiconducting Auston switch. In other words, the time resolution of our circuit is limited by the charge carrier lifetime of the utilized semiconductor Auston switch19. We find an apparent FWHM of the THz Gaussian to be ~500 fs (cf. Supplementary Fig. 4), which is consistent with the fastest charge carrier lifetimes in ion-implanted silicon switches reported so far19.
On first view, it is surprising that an optical pulse with 270 THz (Epump ~1.3 eV) can be down-converted to a coherent 2 THz signal in the striplines. However, when electrons propagate ballistically across the nanojunctions, a unipolar displacement current can couple into the THz striplines by near-field interactions, despite the frequency and momentum mismatch17. To elucidate the near-field interactions in the stripline circuits, we depict side-cuts of the two dominant stripline modes with the odd (even) mode exhibiting an opposite (the same) polarity at each stripline (Fig. 4a, b). Intriguingly, we can visualize the two modes in our stripline circuits. To do so, we record spatial maps of the maximum Itransient for a fixed Δt in striplines without nanojunctions (Fig. 4c). Such maps reveal a signal of Itransient at all stripline edges at smaller amplitude. The polarity distribution of Itransient in Fig. 4c suggests that the odd mode is excited at the center of the striplines (open triangles). At the edges of the striplines, the even mode seems to be predominantly excited (filled triangles in Fig. 4c). At all stripline edges, Itransient follows an intensity dependence with a power law exponent β close to 1 or slightly below (Fig. 4d).
Generally, we would like to point out that we detect the difference of the two situations experimentally (nanojunctions exhibit a non-linear response of Iemission and Itransient, and the edges of the striplines show a rather linear dependence of Itransient and the absence of a measureable Iemission). Furthermore, the nanojunctions are lithographically optimized to exhibit a plasmonic field enhancement in the spectral range of the pump laser. Following earlier work13,14, optical rectification dominates the ultrafast THz response of metal surfaces for low laser intensities. In our understanding, such a low-intensity regime is consistent with the linear response of Itransient at the edges of the striplines (e.g., white triangles in Fig. 4c). In particular, the necessary asymmetry for an optical rectification process is naturally achieved when the laser spot is half-centered at the metallic edges (with one half on the metal and the other half on Al2O3). In our understanding, the plasmonic field enhancement at the tips of the nanojunctions shifts the local laser intensity into the regime of multiphoton-based electron emission, which allows us to measure a non-linear response of both Iemission and Itransient. The essential role of photoemitted electrons in the nanojunctions is verified by the non-linear values of β for both Iemission and Itransient, and that this value is consistent with the expected barrier profile as discussed in connection with Fig. 2. It is noteworthy that also for the striplines without nanojunctions (Fig. 4c), the center regions show a slightly increased amplitude of Itransient (open triangles) compared to all other edges of the striplines (white triangles). Most likely, this increase is caused by a field-enhancement because of the smaller distance between the two striplines at this position. An obvious question arises of whether the optical intensities there are sufficient to get into the multiphoton regime as well. For such gaps with a distance of 1.1 µm (Fig. 4c), we cannot measure any time-integrated Iemission of photoemitted electrons propagating across the gap within the given noise level (data not shown), most likely because of the insulating properties of the Al2O3 substrate. However, we performed a control experiment for such gaps with a distance of 1.1 µm to prove that also there, electrons can be photoemitted from the contacts (cf. Supplementary Fig. 5).
A second scenario considers the band alignment of the Al2O3 substrate with respect to the Fermi energy of the gold striplines. For Al2O3, the conduction band is ~4 eV above the Fermi level of Au. However, for the utilized r-plane Al2O3, surface states are reported which are aligned to the gold Fermi level within the energy bandwidth of the laser (~0.4 eV = 0.9–1.3 eV, cf. Supplementary Fig. 1)30. In between the Au and such localized states in the Al2O3, a thin (approximately nanometer) dielectric layer easily forms from lithographic residues, which acts as a tunneling barrier. In turn, corresponding charge tunneling processes are reasonable to be driven by the electric field of the optical pulses. Again, the necessary spatial asymmetry is realized when the laser spot is half-centered at the metallic edges. In other words, the metallic charge carrier density favors an ultrafast tunneling of electrons from the metal into the Al2O3 at the presence of the optical field. The diffusive back-flow of the transferred electrons is expected to be much slower (~ns–µs), such that this back-flow is not resolvable in Itransient within the given noise level. Within this scenario, we tentatively interpret the slight sub-linear dependence of Itransient vs intensity to stem from a saturation of the surface states occupation. An obvious question is why such tunneling processes do not show up in the signal at the nanojunctions. However, only for lithographically optimized nanojunctions, we find a non-linear power law (Epulse)β. For such nanojunctions, the plasmonic enhancement of the gap modes favors the non-linear multiphoton electron emission, which apparently dominates the saturating tunneling currents into the Al2O3 surface states. By detecting Itransient, we cannot exclude an additional electron flow into the Al2O3substrate at the metal edges, but both discussed scenarios suggest a multiphoton electron emission at the nanojunctions which is verified by the detection of a unipolar, non-linear current Iemission.
We note that we measured Itransient as a function of the laser polarization also for the positions as indicated by the open triangles in Fig. 4c. There, we detect a finite signal only for the shown (perpendicular) polarization. A polarization parallel to the metal edges of the striplines does not give a resolvable Itransient (data not shown). Hereby, we exclude a photo-Dember effect of charge carriers with asymmetric diffusivity for instance in the Au and Al2O3 to be a dominating process. Last but not least, we center the nanojunctions in between the striplines and orient the emitter and collector electrodes in a way to maximize the near-field interactions of the nanojunctions and the odd mode of the striplines (cf. Fig. 4a, e).
The on-chip THz pulses have an apparent FWHM of ~500 fs (cf. Fig. 3a and Supplementary Fig. 4). As mentioned in the Results section, this value is consistent with the fastest charge carrier lifetimes in ion-implanted silicon switches reported so far19,23. We note, however, that the unipolar, non-linear Iemission demonstrates that the photoemission of electrons in the nanojunctions is responsible for the ‘high-frequency generation’. Since the velocity of the ballistic electrons within the gap is experimentally not accessible, we take the Fermi velocity in the order of ~106 ms−1 of the impinging electrons in the emitter as a naive lower boundary. Possible ponderomotive acceleration effects in the strong-field photoemission regime are supposed to give faster velocities5,6. A corresponding upper boundary of the time of flight across the 50 nm gap gives ~ 50 nm/106 ms−1 = 50 fs, which is slightly longer than the optical pulse width of ~14 fs. The above argument makes it reasonable that the ‘high-frequency generation’ in the nanojunctions occurs on a timescale of a few tens of femtoseconds. Given the monotonic dispersion up to ~10 THz for Au striplines on Al2O3 (cf. Fig. 3d)29,31,32,33, the time resolution of Itransient is ultimately limited by the ballistic time of flight of the electrons from the emitter to the collector. For instance, shrinking the striplines’ dimensions (cf. Fig. 3d for striplines with w = s = 1 µm) and further optimization of the material parameters (e.g., glass substrate), as well as the utilization of superstrates, will be useful to push the dispersion and attenuation up to ~10 THz31,32,33.
Taking the utilized compact Er:fiber technology25, our results show a major step forward to combine optical and electronic circuits for telecom compatible high-frequency wafer-scale applications. We demonstrate that asymmetric plasmonic nanojunctions can drive ultrafast photoemission currents at zero bias voltage, and that such current pulses drive coherent THz transients within on-chip high-frequency circuits. Moreover, the transients can be measured up to a millimeter propagation length. We present detailed insights into the femtosecond near-field coupling mechanisms between optical and THz pulses (cf. Fig. 4) and we provide a theoretical understanding of the dispersion that presents the main limitation for the macroscopic on-chip propagation of the THz signals within stripline circuits. Decreasing the nanojunctions’ gap and the corresponding time of flight of photoemitted electrons across the gap can further enhance the fundamental temporal response of the nanojunctions. We note that by introducing the asymmetric nanojunctions in this work (Fig. 2b), we achieve the required spatio-temporal symmetry breaking which is necessary to induce unipolar photoemission currents in nanoscale circuits. The advantage of this approach is that we can detect ultrafast photoemission currents even for laser pulse durations of up to 20 fs (cf. Fig. 1e) without the need for few-cycle (asymmetric) femtosecond laser systems. This presents an encouraging step towards non-linear, wafer-scale femtosecond electronics.
Fabrication of the asymmetric nanojunctions
As substrate we use sapphire with a thickness of 340 µm, covered with 300 nm silicon. The silicon is implanted with O2 to yield an excess carrier lifetime of ~500 fs. In a first lithographical step, we etch the silicon using HF/HNO3 to form the Auston switches. In two subsequent optical lithography steps, we first evaporate a Ti/Au film of 2/35 nm for the nanojunctions and then the Ti/Au striplines with 10/300 nm. The asymmetric nanojunctions are fabricated using FIB milling of the Ti/Au film which is located in a distance of ~350 µm to the Auston switch. The striplines have a total length of ~48 mm and are separated by 10 µm.
Time-integrated photocurrent spectroscopy
We measure the time-integrated Iemission by raster-scanning the pump laser across the area of the nanojunctions at a chopper frequency of 6 kHz using a lock-in amplification scheme. We use an Er-fiber-based pulsed laser (repetition rate 80 MHz) as pump. The pump pulses pass through a non-linear fiber and two SF10-prism pairs to tune the broadband spectrum (0.9–1.3) eV as well as the pulse length (>14 fs) with a maximum average laser power of 55 mW. The pump pulses are focused on the nanojunctions by a CaF2 lens (f = 40 mm) to a spot size of ~7.5 µm (FWHM). We achieve identical experimental results also with a refractive objective. All measurements are done in vacuum (10−6 mbar) at T = 77 K.
On-chip time-domain terahertz spectroscopy
For the time-resolved measurements, we utilize the same laser for the pump as for the time-integrated photocurrent measurements (see above Methods section). After excitation by the pump pulse, the ultrafast field emission current across the asymmetric nanojunctions couples into the striplines. Consequently, an electromagnetic transient, proportional to the initial current, propagates along the striplines. After a time delay Δt, the probe pulse triggers the Auston switch. The probe pulses have a pulse duration of 100 fs, energy of 1.59 eV, laser power of 80 mW, and are focused on the Auston switch by a 10× objective. The spot size of the probe laser is chosen in a way to maximize the read-out signal and yields 9 µm. The presence of the electromagnetic transient at the switch drives the current Itransient(Δt) to the read-out contact. We use frequency modulation of the pump laser in combination with a lock-in amplifier for the read-out. All measurements are done in vacuum (10−6 mbar) in a cryostat. The measurements are done at 77 K to minimize ohmic losses and the skin depth of the THz modes in the striplines.
Simulation of plasmonic enhancement of the nanojunctions
To simulate the field enhancement of the nanojunctions, we apply finite element simulations using COMSOL Multiphysics®. The model for the simulation in Fig. 2b consists of a gold nanojunction with height 37 nm on a sapphire substrate. We calculate the scattering cross-section of an incident light beam as well as the generated electric field distribution in the nanojunctions to deduce the field enhancement at the emitter tips and the collector. In particular, we follow the work by ref. 34 neglecting both specific facets of the gold electrodes in the nanojunctions and possible local changes of the work function16. In a first step, the background electrical (optical) field is analytically calculated solving the Fresnel equations for the vacuum-substrate interfaces without considering the metal structures on top. In a second step, the metal structures are included for calculating the scattering amplitude induced by the plasmonic nanojunctions. Hereby, we can compute the field-enhancement distribution of the nanojunctions and the stripline edges. Further details, e.g., for diffraction index of the substrate and the gold, are given in supplementary Fig. 3.
Simulation of the THz dispersion
To calculate the THz dispersion, we use COMSOL 3D and 2D frequency domain simulations of gold striplines with height h = 300 nm and different values for the width w and separation s (cf. Fig. 3d). We simulate the propagation of plane waves with different frequencies along the striplines to get the dispersion relation of the effective refractive index neff. Gold is considered to be a ‘perfect conductor’ within the COMSOL database, and the dielectric function of Al2O3 is taken from refs. 32,33
All relevant data that support our experimental findings are available from the corresponding author upon reasonable request.
Ropers, C., Solli, D. R., Schulz, C. P., Lienau, C. & Elsaesser, T. Localized multiphoton emission of femtosecond electron pulses from metal nanotips. Phys. Rev. Lett. 98, 043907 (2007).
Yanagisawa, H. et al. Energy distribution curves of ultrafast laser-induced field emission and their implications for electron dynamics. Phys. Rev. Lett. 107, 087601 (2011).
Barwick, B. et al. Laser-induced ultrafast electron emission from a field emission tip. New J. Phys. 9, 142 (2007).
Schenk, M., Krüger, M. & Hommelhoff, P. Strong-field above-threshold photoemission from sharp metal tips. Phys. Rev. Lett. 105, 257601 (2010).
Herink, G., Solli, D. R., Gulde, M. & Ropers, C. Field-driven photoemission from nanostructures quenches the quiver motion. Nature 483, 190–193 (2012).
Krüger, M. et al. Interaction of ultrashort laser pulses with metal nanotips: a model system for strong-field phenomena. New J. Phys. 14, 085019 (2012).
Yalunin, S. V. et al. Field localization and rescattering in tip-enhanced photoemission. Ann. Phys. 525, L12–L18 (2013).
Schiffrin, A. et al. Optical-field-induced current in dielectrics. Nature 493, 70–74 (2013).
Rybka, T. et al. Sub-cycle optical phase control of nanotunnelling in the single-electron regime. Nat. Photonics 10, 667–670 (2016).
Putnam, W. P., Hobbs, R. G., Keathley, P. D., Berggren, K. K. & Kärtner, F. X. Optical-field-controlled photoemission from plasmonic nanoparticles. Nat. Phys. 13, 335–339 (2017).
Aeschlimann, M. et al. Spatiotemporal control of nanooptical excitations. Proc. Natl. Acad. Sci. USA 107, 5329–5333 (2010).
Kern, J. et al. Electrically driven optical antennas. Nat. Photonics 9, 582–586 (2015).
Ramanandan, G. K. P., Ramakrishnan, G., Kumar, N., Adam, A. J. L. & Planken, P. C. M. Emission of terahertz pulses from nanostructured metal surfaces. J. Phys. Appl. Phys. 47, 374003 (2014).
Polyushkin, D. K. et al. Mechanisms of THz generation from silver nanoparticle and nanohole arrays illuminated by 100 fs pulses of infrared light. Phys. Rev. B 89, 125426 (2014).
Costa, L., Betz, M., Spasenović, M., Bristow, A. D. & van Driel, H. M. All-optical injection of ballistic electrical currents in unbiased silicon. Nat. Phys. 3, 632–635 (2007).
Higuchi, T., Maisenbacher, L., Liehl, A., Dombi, P. & Hommelhoff, P. A. Nanoscale vacuum-tube diode triggered by few-cycle laser pulses. Appl. Phys. Lett. 106, 051109 (2015).
Auston, D. Impulse response of photoconductors in transmission lines. IEEE J. Quantum Electron. 19, 639–648 (1983).
Grischkowsky, D., Iii, I. N. D., Chen, J. C. & Chi, C.-C. Electromagnetic shock waves from transmission lines. Phys. Rev. Lett. 59, 1663–1666 (1987).
Kadow, C. et al. Self-assembled ErAs islands in GaAs: growth and subpicosecond carrier dynamics. Appl. Phys. Lett. 75, 3548–3550 (1999).
Griebel, M. et al. Tunable subpicosecond optoelectronic transduction in superlattices of self-assembled ErAs nanoislands. Nat. Mater. 2, 122–126 (2003).
Brenneis, A. et al. Ultrafast electronic readout of diamond nitrogen-vacancy centres coupled to graphene. Nat. Nanotechnol. 10, 135–139 (2015).
Kastl, C., Karnetzky, C., Karl, H. & Holleitner, A. W. Ultrafast helicity control of surface currents in topological insulators with near-unity fidelity. Nat. Commun. 6, 6617 (2015).
Karnetzky, C., Sponfeldner, L., Engl, M. & Holleitner, A. W. Ballistic and resonant negative photocurrents in semiconducting carbon nanotubes. Phys. Rev. B 95, 161405 (2017).
Williams, G. P. Filling the THz gap-high power sources and applications. Rep. Prog. Phys. 69, 301–326 (2006).
Brida, D., Krauss, G., Sell, A. & Leitenstorfer, A. Ultrabroadband Er:fiber lasers. Laser Photonics Rev. 8, 409–428 (2014).
Trebino, R. et al. Measuring ultrashort laser pulses in the time-frequency domain using frequency-resolved optical gating. Rev. Sci. Instrum. 68, 3277–3295 (1997).
Keldysh, L. V. Ionization in the field of a strong electromagnetic wave. Sov. Phys. J. Exp. Theor. Phys. 20, 1307–1314 (1965).
Prechtel, L. et al. Time-resolved ultrafast photocurrents and terahertz generation in freely suspended graphene. Nat. Commun. 3, 646 (2012).
Kastl, C., Karnetzky, C., Brenneis, A., Langrieger, F. & Holleitner, A. W. Topological insulators as ultrafast auston switches in on-chip THz-circuits. IEEE J. Sel. Top. Quantum Electron. 23, 1–5 (2017).
Gillet, E. & Ealet, B. Characterization of sapphire surfaces by electron energy-loss spectroscopy. Surf. Sci. 273, 427–436 (1992).
Hasnain, G., Dienes, A. & Whinnery, J. R. Dispersion of picosecond pulses in coplanar transmission lines. IEEE Trans. Microw. Theory Tech. 34, 738–741 (1986).
Russell, E. E. & Bell, E. E. Optical constants of sapphire in the far infrared. J. Opt. Soc. Am. 57, 543–544 (1967).
Querry M. R. Optical Constants, Contractor Report CRDC-CR-85034 (University of Missouri, Missouri, 1985).
Schraml, K. et al. Optical properties and interparticle coupling of plasmonic bowtie nanoantennas on a semiconducting substrate. Phys. Rev. B 90, 035435 (2014).
We acknowledge S. Govorov and A. Bandrauk for very helpful discussions. The work was supported by the European Research Council (ERC) under Grant NanoREAL (No. 306754).
The authors declare no competing interests.
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
About this article
Cite this article
Karnetzky, C., Zimmermann, P., Trummer, C. et al. Towards femtosecond on-chip electronics based on plasmonic hot electron nano-emitters. Nat Commun 9, 2471 (2018). https://doi.org/10.1038/s41467-018-04666-y
Nature Communications (2020)
Nature Communications (2020)
Optical and Quantum Electronics (2020)
Nature Communications (2019)