Transient metal-centered states mediate isomerization of a photochromic ruthenium-sulfoxide complex

Abstract

Ultrafast isomerization reactions underpin many processes in (bio)chemical systems and molecular materials. Understanding the coupled evolution of atomic and molecular structure during isomerization is paramount for control and rational design in molecular science. Here we report transient X-ray absorption studies of the photo-induced linkage isomerization of a Ru-based photochromic molecule. X-ray spectra reveal the spin and valence charge of the Ru atom and provide experimental evidence that metal-centered excited states mediate isomerization. Complementary X-ray spectra of the functional ligand S atoms probe the nuclear structural rearrangements, highlighting the formation of two metal-centered states with different metal-ligand bonding. These results address an essential open question regarding the relative roles of transient charge-transfer and metal-centered states in mediating photoisomerization. Global temporal and spectral data analysis combined with time-dependent density functional theory reveals a complex mechanism for photoisomerization with atomic details of the transient molecular and electronic structure not accessible by other means.

Introduction

Ultrafast photo-isomerization reactions are central to chemical processes ranging from the first step in vision1,2, to molecular switches and logic3,4,5, to photoactive materials6,7,8, and photo-thermal energy conversion9,10,11. Efficient molecular isomerization involves correlated changes in the electronic and atomic structure, but we presently lack a detailed mechanistic understanding of how these correlated structural dynamics influence reaction rates and quantum efficiencies12,13. New insight concerning the related electronic and nuclear motion during isomerization is essential for optimization and control of such photochemical phenomena through directed synthesis.

As a particular class of materials to which isomerization is often highly relevant, photochromic transition metal complexes have demonstrated photo-responsive electronic, magnetic, and structural properties14,15,16,17,18. They provide an important framework to investigate the coupling of electronic and nuclear motion that underpins linkage isomerizations and more generally, reactions of molecular photoswitches, molecular machines, and photocatalysts. Moreover, the manipulation of their intrinsic properties and dynamics via associated ligand structure and choice of metal center can be greatly aided by mechanistic insight at the atomic level. As an example, Ruthenium-based polypyridine sulfoxide complexes exhibit Ru–S → Ru–O isomerization (Fig. 1a) that can be optically triggered with high quantum efficiency17,19,20,21,22. Their isomerization rates are empirically tunable via ligand modification of the functional moieties, which in this study comprise a sulfoxide group attached to a chelate ring23.

Fig. 1
figure1

Structures of [Ru(bpy)2(pyESO)]2+ and various photoisomerization pathways. a Molecular structures before and after photoinduced isomerization. Color code: cyan Ru, yellow S, red O, blue N, green C, white H. b Adiabatic photo-isomerization on lowest 3MLCT excited states. c Non-adiabatic photo-isomerization on lowest 3MLCT excited states. d Non-adiabatic photo-isomerization involving 3MLCT and 3MC excited states. Vertical arrows represent photo-absorption and emission processes. Wavy arrows represent non-radiative transitions (conical intersections are not shown for simplicity). Curvy arrows represent adiabatic relaxation paths on potential energy surfaces. Dotted lines represent diabatic states for triplet states. 1GS: S-bonded ground state reactant, 1GO: O-bonded ground state photoproduct, 3MLCTS: S-bonded 3MLCT excited state, 3MLCTO: O-bonded 3MLCT excited state, 3MLCTSO: sideways SO-bonded 3MLCT excited state, 3MCS: S-bonded 3MC excited state, 3MCO: O-bonded 3MC excited state

Ultrafast optical spectroscopy studies of several sulfoxide-containing Ruthenium complexes20,21,23,24,25 first revealed the dynamics of the isomerization process, and established that the initial excited state is predominantly metal-to-ligand charge-transfer (MLCT) in character. Moreover, the transient optical data of these complexes suggested photoisomerization mechanisms mediated by triplet MLCT (3MLCT) excited states. For some sulfoxide complexes (e.g., those with monodentate dimethyl sulfoxide ligands), this S-bonded state (3MLCTS) can directly convert to the O-bonded charge transfer state (3MLCTO)26. That is, the isomerization occurs along the excited state 3MLCT potential energy surface (PES), as depicted in Fig. 1b27. Accordingly, the linkage photo-isomerization can be described as an adiabatic process, as the Ru–S bond breaking and Ru–O bond making processes occur on the lowest electronically excited PES.

For other sulfoxide complexes (e.g., those with chelating sulfoxide ligands similar to that shown in Fig. 1a), the 3MLCTS state was suggested to couple non-adiabatically to the singlet ground state20,21,23,24,25. This was suggested as an efficient pathway to formation of the O-bonded ground state (1GO), as shown in Fig. 1c, possibly via a sideways-bonded 3MLCT intermediate (3MLCTSO). In this scenario, the Ru–S bond breaking and Ru–O bond making processes involve both the lowest triplet and singlet PESs. However, the transient optical spectroscopy that is the basis for the isomerization mechanisms described above provides only indirect information on transient valence charge and atomic structure and is blind to transitions involving optically dark states, including metal-centered excited states that may be of particular interest for this class of systems, as described below.

An essential open question in functional transition–metal complexes is the relative roles of transient charge-transfer states (characterized by valence charge in the ligand π* orbitals) vs. metal-centered (MC) excited states (with valence charge in the ligand-field-split metal d orbitals) in mediating the quantum efficiency of photo-induced processes such as isomerization. Theoretical studies of the Ru sulfoxide (and phosphinidene oxide) photochromic complexes, based on unrestricted density functional theory (DFT), conclude that triplet MC (3MC) states mediate the isomerization (as depicted in Fig. 1d), and that degenerate potential energy crossing points occur around these MC states22,28,29. Thus these predictions support a model in which non-adiabatic isomerization pathways through conical intersection seams involving 3MC states are favored over adiabatic routes, with important implications for the speed and quantum efficiency of these reactions. Other non-adiabatic isomerization pathways that are instead mediated by 3MLCT states have been suggested for Ru sulfoxide complexes, based on optical spectroscopic studies20,21,23,24,25, and for a Ru nitrosyl complex, based on theoretical studies30,31,32,33. The precise role of MC states and the PESs on which isomerization occurs, therefore, remain important open questions for this class of systems.

Time-resolved X-ray absorption spectroscopy (TR-XAS) is a powerful tool for addressing these issues since X-rays probe transient valence states from specific atomic core levels of well-defined energy and symmetry, and are sensitive to both the optically allowed CT states and optically dark MC states. In particular, transition metal L-edge spectroscopy probes unoccupied molecular orbitals with mainly metal d character, while ligand K-edge spectroscopy probes molecular orbitals of predominately ligand atom p character (Fig. 2), thus providing complementary views of the valence charge dynamics from the perspective of the central metal atom and from the ligand cage. Moreover, TR-XAS spectra can be directly compared with DFT and time-dependent DFT (TD-DFT) calculations to provide new details on transient valence charge distributions and transition-state molecular structures34,35,36,37,38,39. This approach is particularly effective in 4d transition-metal complexes (e.g., Ru-based) where strong spin-orbit coupling dominates and multiplet effects are negligible, rendering TD-DFT calculations a reliable tool for quantitative predictions of X-ray spectra36.

Fig. 2
figure2

Relevant atomic orbitals probed by XAS experiments. XAS at the Ru L-edge is characterized by transitions between Ru 2p orbitals and molecular orbitals containing primarily Ru 4d character. XAS at the S K-edge is characterized by transitions between S 1s orbitals and molecular orbitals that are an antibonding combination of S 3p and Ru 4d orbitals (“π* MOs” indicated by solid box) and higher-energy ligand-centered orbitals

Here we present TR-XAS studies of a photochromic Ru–sulfoxide complex, [Ru(bpy)2(pyESO)]2+ (Fig. 1a, where bpy = 2,2′-bipyridine and pyESO=2-((isopropylsulfinyl)ethyl)pyridine), using X-ray energies resonant with both the central Ru atom and S atom of the functional ligand. Transient Ru L3-edge spectra provide detailed insight to the electronic structure of the ground state and excited state intermediates during isomerization. Simultaneously, S K-edge spectra probe the structural changes as the metal bonding partner switches from sulfur to oxygen. We suggest a detailed mechanism for the complex isomerization reaction based on global analysis and comparison of our TR-XAS results with TD-DFT simulations. Importantly, our experimental results provide the first direct evidence that isomerization in [Ru(bpy)2(pyESO)]2+ proceeds from MC ligand-field states. In these states, electronic occupation of antibonding eg* orbitals promotes elongation of the metal-ligand bond and facilitates the isomerization reaction.

Results

General

Static and transient differential X-ray absorption spectra were measured at the Ru L3-edge (2.84 keV) and at the S K-edge (2.47 keV) of [Ru(bpy)2(pyESO)]2+. Differential spectra were measured as a function of time delay following optical excitation of the 1MLCT transition, with time-resolution determined by the 70 ps X-ray pulse duration. Static absorption spectra representing the S-bonded species in its ground electronic state are shown in the top panels of Fig. 3a, b. The Ru L-edge spectrum is comprised of transitions from 2p core levels to unoccupied orbitals of primarily Ru 4d character (dx2y2 and dz2), as illustrated in Supplementary Fig. 1. The S K-edge spectrum is comprised of transitions from the S 1s core level to antibonding orbitals of primarily sulfoxide ligand character (with some metal character contributing to the lower energy peak), as illustrated in Supplementary Fig. 2. The differential absorption spectra measured at 100 ps delay are presented immediately below the static spectra in Fig. 3a (Ru L3-edge) and Fig. 3b (S K-edge). Figure 3c, d present the time dynamics of the dominant spectral feature at the Ru L3-edge (2838.5 eV) and S K-edge (2474.8 eV), respectively.

Fig. 3
figure3

Results of TR-XAS measurements and comparison with TD-DFT simulated spectra. Measured and simulated data at the Ru L3-edge (a) and S K-edge (b). Top panel (solid black trace) is the measured absorption spectrum of [Ru(bpy)2(pyESO)](PF6)2 in the S-bonded ground state. The TD-DFT predicted transitions are indicated as sticks and the predicted spectrum is shown by the dashed line (overlaid with the measured spectrum). Below (second from top, square points) is the measured transient differential absorption spectrum at 100 ps time delay. Error bars indicate the standard error of the mean (obscured in some cases by the large size of the data points). All dashed traces below are TD-DFT simulated differential spectra of several proposed excited state intermediates (S-bonded triplet MLCT and MC states: 3MLCTS and 3MCS; O-bonded MC state: 3MCO) and the O-bonded ground state (1GO). The transient measured and simulated difference spectra are all plotted on the same vertical scale, with the amplitude indicated by the scale bars. c Fixed energy time-delay scan measured at the Ru L3-edge (2838.5 eV), including error bars indicating the standard error of the mean. d Fixed energy time-delay scan measured at the S K-edge (2474.0 eV), with error bars indicating the standard error of the mean

Also shown in Fig. 3a, b are the TD-DFT simulation results. The predicted transitions for the S-bonded ground state (1GS) are overlaid with the ground state XAS data in the top panels of Fig. 3a, b, highlighting the validity of the TD-DFT simulation approach. The predicted differential XAS spectra for several possible excited state intermediates and the O-bonded ground state (as suggested by previous optical and DFT studies) are shown in the lower panels of Fig. 3a, b: S-bonded MLCT state (3MLCTS), S-bonded MC state (3MCS), O-bonded MC state (3MCO), and the O-bonded ground state (1GO) photoproduct. The predicted differential spectra shown in Fig. 3 are scaled to fit the 1GO predicted differential spectrum to that measured after completion of the photoisomerization reaction (at time delay = 2.5 ns). Note that from the perspective of the Ru site (Fig. 3a) MLCT and MC states can be clearly differentiated, but the metal-ligand bonding configuration of the two MC states is indistinguishable. Conversely, from the perspective of the S site (Fig. 3b), the TD-DFT predicted differential spectra for the 3MCS and 3MCO states are clearly distinguishable in amplitude, as they represent very different sulfur coordination states, i.e., bound vs. unbound to the metal center.

Ru L3-edge TR-XAS

Absorption at the Ru L3-edge preferentially probes dipole-allowed transitions to the 4d levels (split into three occupied t2g and two unoccupied eg orbitals for octahedral RuII complexes), and is thus sensitive to changes in occupancy of the Ru valence orbitals. It is clear from visual comparison (Fig. 3a) that the differential spectrum measured at 100 ps time delay does not match the simulated MLCT state spectrum (3MLCTS). MLCT excitation is characterized by the transfer of electron density from the Ru 4d (t2g) orbitals to a bipyridyl ligand π* orbital. The predicted 3MLCTS transient spectrum presented here is consistent with the measured and calculated 3MLCT spectra of other polypyridyl Ru complexes reported previously35,40. Briefly, the 3MLCT spectrum reflects the oxidation of Ru and the associated decreased shielding of the Ru 2p and eg orbitals (manifested as an overall spectral shift towards higher energy, 2840 eV bleach and 2842 eV induced absorption)35, and a low energy transition into the newly created t2g vacancy (see Supplementary Fig. 1). The measured differential spectrum, characterized by a narrow bleach (2.841 keV) and a single broad induced absorption at lower energies (2837–2839 eV), is inconsistent with these predicted 3MLCT features.

Excited 3MC states are characterized by a reconfiguration of valence electrons in the Ru 4d orbitals resulting in two unpaired electrons of the same spin (from t2g6eg0 in the ground state to t2g5eg1 in the 3MC state). Therefore, the predicted 3MC transient spectra (Fig. 3a) include a low energy induced absorption transition (2837 eV) to the newly created t2g vacancy (see Supplemental Fig. 1), and bleach (2841 eV) due to the newly occupied eg orbital. Furthermore, a predicted splitting of the eg degeneracy in the MC states contributes both to the bleach and to a second induced absorption transition (2839 eV). Comparison of the measured 100 ps transient spectrum with these predicted features provides clear evidence for 3MC excited state intermediates (either 3MCS or 3MCO).

The time delay scan in Fig. 3c is measured with fixed X-ray energy, resonant with the induced absorption feature (2838.5 eV) predicted for the 3MC states, and the fast growth indicates that a 3MC state is populated within our experimental time resolution. This observation of transient excited MC states is the first direct confirmation of previous theoretical predictions for MC-mediated isomerization pathways in Ru sulfoxide complexes22. This result also highlights the utility of TR-XAS to detect optically dark excited states. Although the results from previous time-resolved optical studies are consistent with MLCT-mediated isomerization pathways23, the insensitivity of optical transitions to MC states leads to a limited view of the reaction process. The TR-XAS results presented here enable a complete understanding of the isomerization mechanism with sensitivity to both CT and MC intermediate states.

S K-edge TR-XAS

In contrast to the spectra at the Ru L3-edge, the orbitals probed by the S K-edge transitions are not involved in the reconfiguration of valence electrons in the MLCT or MC states. Therefore, we find that the S K-edge spectrum is sensitive only to the isomerization reaction (Fig. 3b). It is well established that the S 1s→3p transition energy reflects the effective charge on the S atom and is therefore sensitive to its local environment41. For [Ru(bpy)2(pyESO)]2+, the change in Ru–S bonding that occurs during isomerization has a significant effect on the S K-edge spectrum. For the S-bonded ground and excited state species the Ru–S bond length changes by <3% (Supplementary Table 1) and the S atomic charge density (calculated Mulliken charge) changes by <5%. Therefore, it is not surprising that very small difference signals are predicted for the 3MLCTS and 3MCS states relative to 1GS (Fig. 3b). The O-bonded excited and ground states are characterized by Ru–S bond cleavage (>45% increases in Ru–S bond lengths, Supplementary Table 1) and an increased electron density on S that was previously donated to the Ru–S bond (Mulliken charge decreases 15%). These changes in bonding and charge result in large transient difference signals predicted for the 3MCO and 1GO states (Fig. 3b), with an overall spectral shift to lower energy (2476 eV bleach and 2474.5 eV induced absorption), and transient difference signal amplitudes that are more than eight times larger than those predicted for the S-bonded species (3MLCTS or 3MCS). The magnitude and shape of the transient signal measured at 100 ps delay closely match the predicted spectra of the O-bonded species (3MCO and 1GO). Therefore, the transient MC intermediate species measured (identified from the Ru L3-edge spectrum) can now be distinguished in terms of metal-ligand bonding (from the S K-edge spectrum) and the 3MCO state is clearly identified.

The time delay scan in Fig. 3d is taken at a fixed energy resonant with the induced absorption in the S K-edge transient spectrum (2474.8 eV) and consistent with formation of the O-bonded species. A two-component time response is observed, including the dominant fast increase in absorption (faster than our experimental resolution of 70 ps), indicating the formation of 3MCO states on this time scale. A smaller secondary increase in absorption develops on the hundreds of picosecond time scale. This suggests that O-bonded states are not exclusively formed directly from the 3MLCTS state, but also by another slower pathway involving a S-bonded MC state intermediate (indicated from the Ru L3-edge). Optical studies also report a two-component rise time (72 ps and 640 ps) at wavelengths characteristic of the photoisomerization product23. Although a quantitative kinetic comparison of the two datasets is not particularly informative due to their different sensitivities (the optical absorption is attributed only to 1GO formation and the S K-edge difference signal is attributed to formation of all O-bonded excited and ground state species), they are consistent in reflecting the fast creation of O-bonded species. The slow rise in optical absorption was attributed to conformational relaxation of the isomerized complex; however the slow rise in S K-edge difference signal cannot be attributed to such structural changes as it is sensitive only to the Ru–S bond length which is not predicted to change significantly after formation of the 3MCO species (Supplementary Table 1, Supplementary Fig. 3).

The TD-DFT calculations and analysis of the potential energy landscapes reveal low transition barriers between the 3MLCTS surface and the 3MCS (1.1 kcal/mol) and 3MCO (1.6 kcal/mol) surfaces (Supplementary Fig. 3). The possibility to populate either 3MC state upon MLCT excitation explains our observation of bimodal isomerization (two-component time response in Fig. 3d) and is consistent with the predictions of transition state theory. Immediate population of the 3MCO state leads to fast and direct Ru−S bond dissociation, as population of an antibonding eg orbital that elongates the Ru–S bond is predicted for this state (Supplementary Table 1). However, in the 3MCS state a Ru–N bond elongation (orthogonal to the Ru–S bond, Supplementary Table 1) is predicted and Ru−S bond dissociation occurs only upon interconversion to the 3MCO state (with a 4.7 kcal/mol barrier, Supplementary Fig. 4). Interconversion between MC states with different metal-ligand bonding has also been predicted with similar transition barriers for other Ru-centered photochromic complexes22,28. Those predictions for a similar Ru sulfoxide complex, however, do not include the direct formation of the 3MCO state (from the 3MLCTS state), as the major structural change (Ru–S bond elongation) occurred in the 3MCS state and the minimum energy path connected the 3MLCTS and 3MCS states22.

Global analysis and isomerization kinetics

Figure 4 presents a complete set of differential spectra at the Ru L3-edge and S K-edge and corresponding time scans at fixed energy. Quantitative analysis of this complete data set provides a comprehensive picture of the isomerization pathways and intermediate states. Singular value decomposition (SVD) analysis is first applied to the Ru and S edge spectra to estimate the number of principal intermediate states that contribute significantly to the measured transient spectra. At the Ru L3-edge, two major spectral components are observed (Supplementary Fig. 5) and assigned to the excited MC states (3MCS, 3MCO) and the O-bonded ground state (1GO). These states are assigned on the basis of comparison of the individual spectral components with the simulated transient spectra of each predicted intermediate species. At the S K-edge a single spectral component is identified (Supplementary Fig. 5) and assigned to all O-bonded states (3MCO, 1GO).

Fig. 4
figure4

Complete TR-XAS data measured for [Ru(bpy)2(pyESO)]2+ and global fit results. Measured TR-XAS data (scattered) is overlaid with the least-square fit to the kinetic model described in the text (solid lines). a, b Differential absorption spectra at several fixed time-delays at the Ru L3-edge (a) and S K-edge (b). Vertical lines indicate the energies monitored as a function of time-delay. c, d Time-delay scans at several Ru L3-edge (c) and S K-edge (d) fixed energies

A proposed mechanism for photoisomerization of [Ru(bpy)2(pyESO)]2+ is shown in Fig. 5a. The data presented in the previous sections established several mechanistic requirements, which are indicated by bold arrows and include the necessity of two isomerization pathways with associated formation times for the O-bonded ground state. All other pathways included are discussed below. Global fitting of all transient spectra and fixed energy time scans at both the Ru L3-edge and S K-edge was performed, based on linear combinations of the TD-DFT spectra and the kinetic

Fig. 5
figure5

Proposed mechanism and kinetics for the photoisomerization of [Ru(bpy)2(pyESO)]2+. a Proposed photoisomerization mechanism with labels indicating electronic state and lifetime for each ground state and intermediate structure. Bold arrows indicate the basic mechanistic requirements required to describe the Ru and S edge data, including the necessity of MC excited states (Ru edge) and of two isomerization pathways (S edge), and the formation time for the O-bonded ground state. Insets show the major structural changes that accompany electronic transitions. b Time-dependent fractional population for each reaction intermediate

equations derived for the mechanism in Fig. 5a (see Supplementary Note 1). Several variations of the photoisomerization mechanism were explored, including the addition of an O-bonded 3MLCT intermediate (see Supplementary Note 2 and Supplementary Fig. 6); however, the mechanism shown in Fig. 5a both provides the best fit to all data (based on least-square minimization) and satisfies all basic conditions inferred from the results presented in the previous sections. The global fitting results are overlaid with the measured differential spectra and time scans in Fig. 4. The rate constants obtained from this global fit are indicated in Fig. 5a, along with the time-dependent fractional populations of all ground and excited states in Fig. 5b.

As discussed in the previous sections, photoisomerization from the S-bonded to O-bonded species occurs through two separate pathways, and the following ratios were assigned by the global fit analysis: 40% fast formation of 3MCO (directly from 3MLCTS) and 60% slower formation of 3MCO (from 3MCS). An upper limit for the fast 3MC state formation (required to reproduce the Ru-edge transient spectra at short time delay) was established as <10 ps, as described in the Supplementary Note 3 (Supplementary Fig. 7). The sub-10 ps growth of the 3MC state is consistent with the previously observed ~4 ps decay of the characteristic induced absorption of MLCT states in the near-UV spectral region for this class of systems23. The additional slower photoisomerization pathway (required to reproduce the two-component response of the S-edge time scans) is characterized by a transition from 3MCS to 3MCO with a rate constant of 1/580 ps−1. Subsequent relaxation from the isomerized 3MCO state to the O-bonded ground state (1GO) occurs with a rate constant of 1/430 ps−1.

In order to account for the previously reported isomerization quantum yield, we find it necessary to introduce an additional relaxation pathway from the 3MCS state back to the initial S-bonded ground state (rate = 1/720 ps−1). This does not result in an appreciable change in the S K-edge data fit quality (as the Ru–S bond is largely unchanged) and produces an isomerization quantum yield of 52%, consistent with the reported 58%23. In addition, a separate decay pathway from the 3MLCTS state back to the ground state is necessary to account for the residual MLCT signal in the Ru edge transient spectra (Supplementary Note 4 and Supplementary Fig. 8). This longer-lived 3MLCT state is quickly formed (within a few ps), and a decay rate of 1/170 ps−1 to the S-bonded ground state was assigned by the global analysis. A longer-lived intermediate state (50–70 ps lifetime) with mixed 3MLCT and 3MC character has been proposed for similar Ru-centered photochromic complexes23.

Discussion

The photo-induced linkage isomerization reaction of a Ru-sulfoxide complex was followed in real-time with atomic specificity using TR-XAS and the comparison with TD-DFT simulated X-ray absorption spectra. The results highlight the unique ability of Ru L3-edge XAS to distinguish CT and MC excited states with high contrast. This distinction enables the first clear experimental evidence for the critical role of long-lived MC excited states during isomerization of Ru-sulfoxide complexes, which was previously obscured by the insensitivity of optical spectroscopy to MC states. Furthermore, these results demonstrate that the S K-edge spectrum is primarily sensitive to the Ru–S bond length. Therefore, the combined approach of metal and ligand atom XAS enables the correlation of electronic configuration and Ru–S bonding required to determine the detailed isomerization reaction mechanism presented here.

Photoisomerization of [Ru(bpy)2(pyESO)]2+ is found to proceed through two reaction pathways, both of which find the initially formed 3MLCTS excited state depopulated by coupling with 3MC states. The antibonding nature of the 3MC states facilitate the structural changes that make the linkage isomerization possible. One reaction pathway likely proceeds through a dissociative state (S-bonded 3MC) with an elongating Ru–S bond (reminiscent of a previously calculated linkage isomerization for a similar Ru–sulfoxide complex)22, resulting in fast formation of the O-bonded 3MCO state. A second pathway first elongates the Ru–N bonds perpendicular to the Ru–S bond (3MCS state), forming the O-bonded 3MCO state more slowly. The formation of such MC states generally facilitates isomerization and dissociation reactions in transition metal complexes, as they are accompanied by larger structural rearrangements than CT states due to the occupation of antibonding molecular orbitals aligned with the metal-ligand bonds42. Therefore, the population of MC excited states can facilitate the efficiency of molecular devices through directed motion or through the creation of reactive species, in the cases of ligand isomerization and dissociation, respectively.

For the class of Ru-based photochromic complexes containing sulfoxide ligands, the proposed role of MC excited states has varied. For chelating sulfoxide ligands, such as pyESO, high isomerization quantum yields have been attributed to non-adiabatic transitions between the triplet excited state and singlet ground state PESs. The potential energy crossing points were predicted by DFT to occur around the 3MC state minima22,28,29, highlighting the role of MC states in facilitating efficient isomerization. However, the optical spectroscopy suggested that large structural changes occur in the CT excited states and the crossing points were predicted to occur around the 3MLCT minima20,21,23,24,25. In this work we have demonstrated that the high isomerization quantum yield of [Ru(bpy)2(pyESO)]2+ is achieved mainly by fast adiabatic formation of the 3MCO state from the 3MLCTS state. Although non-adiabatic transitions may play a role in forming the Ru–O bond in the ground state (Supplementary Fig. 4), the major structural changes associated with ligand isomerization occur through formation of the 3MCO state adiabatically on the triplet PES. Studies like the one presented here, that can simultaneously resolve both the electronic configuration of the central metal atom and metal-ligand bonding, are essential to determine the precise role of MC states during photoisomerization and how that role depends on the nature of the isomerizing ligand.

Methods

Experimental procedures

X-ray absorption measurements were performed at the time-resolved beamline 6.0.1 of the Advanced Light Source (ALS) at Lawrence Berkeley National Laboratory. Synthesis of [Ru(bpy)2(pyESO)](PF6)2 followed published procedures23. The sample was dissolved in propylene carbonate (15 mM), which was continuously refreshed using a sapphire nozzle liquid jet (50 um thickness) in a He atmosphere. The undulator beamline is equipped with a chopper running at 4 kHz, thus reducing the average X-ray flux and determining the data acquisition rate. A double crystal Si(111) monochromator produced monochromatic X-rays tunable around the Ru L3-edge (~2840 eV) and S K-edge (~2470 eV) with 0.35 eV resolution. Two ALS filling modes were used: “multibunch” for the Ru L3-edge (276 electron bunches spaced by 2 ns and one so-called “camshaft” bunch separated by a 100 ns filling gap), and “two-bunch” mode for the S K-edge (two “camshaft” bunches separated by 328 ns). In both filling modes the X-ray pulses are 70 ps (FWHM) in duration. A fast avalanche photodiode was used to gate and record one X-ray “camshaft” pulse at 4 kHz after transmission through the liquid jet. The X-ray spot size was 180 × 160 μm2 at the sample position.

The optical pump was produced by an amplified Ti:Sapphire laser system described elsewhere35. The laser frequency was down-converted to 2 kHz (to interleave X-ray and laser pulses) and the 400 nm pump wavelength was derived by second harmonic generation. The pump wavelength was selected in order to be close to the peak of the absorption feature attributed to MLCT excitation (see optical absorption spectrum in ref. 23). The pump pulse was temporally stretched to ~500 fs using fused silica. The laser overfilled the X-ray spot size and the pump pulse fluence was 100 mJ/cm2. Laser and X-ray pulses were overlapped at the sample spatially and temporally using a pinhole and fast APD detector, respectively.

Custom electronics were used to synchronize the laser pulses to the ALS orbit clock and chopper openings, thus allowing precise control of the time delay between laser and X-ray pulses. The transmitted X-ray intensity was collected with and without the laser pump as a function of monochromator energy or pump-probe time delay. Differential absorption (ΔA) was calculated as

$$\Delta A = - {\mathrm{log}}\left( {\frac{{I_{\mathrm{on}}}}{{I_{\mathrm{off}}}}} \right)$$

where Ion and Ioff are transmitted intensity with and laser excitation, respectively.

Theoretical calculations

All reaction species of [Ru(bpy)2(pyESO)]2+ were calculated using DFT in the gas phase using the program Gaussian 0943. All possible geometries were fully optimized using the hybrid functional of Perdew, Burke, and Ernzerhof (PBE0)44 combined with def2-SVP basis set45 for all atoms. To treat the scalar relativistic effect for Ru atoms, we employed the relativistic effective core potential (RECP)46. All transition states were identified by one imaginary frequency and confirmed by the intrinsic reaction coordinate (IRC) method47,48. The reaction PES (Supplementary Fig. 4) reflects the zero-point corrected energies for each intermediate state, relative to the S-bonded ground state. These energies were re-calculated using the polarizable continuum model to account for the propylene carbonate solvent environment present in the experiments (Supplementary Table 2); however, the solvent did not affect the relative energies of the intermediate states and was not considered further.

The XANES spectra of Ru L3- and S K-edges were simulated from the optimized geometries described above with TD-DFT calculations using the ORCA 2.9.1 program49. The PBE0 functional was implemented44. Scalar relativistic effects and solvent effects were addressed using the second-order Douglas–Kroll-Hess Hamiltonian (DKH2)50 and conductor-like screening model (COSMO)51, respectively. The Tamm–Dancoff approximation (TDA)52 and the resolution of the identity Coulomb with the chain of spheres exchange algorithms (RIJCOSX)53,54 were employed for the efficiency of calculations. The segmented all-electron relativistically contracted (SARC) def2-TZVP(-f) basis set55 and decontracted def2-TZVP/J auxiliary basis set for all atoms were used. The tight SCF convergence criteria and DFT integration grid (Grid4) were implemented to obtain a reliable accuracy of calculation. The absolute energy depends on the computational functionals and basis sets, and shifts of −5.45 eV and 47.80 eV were required to match the experimental Ru L3-edge and S K-edge spectra, respectively, which are of reasonable magnitudes based on previous work36,50. A Gaussian broadening of 1.6 eV was used to match the calculated and measured spectral peak width.

Data availability

The data that support the findings of this study are available from the corresponding authors upon reasonable request.

References

  1. 1.

    Schoenlein, R. W., Peteanu, L. A., Mathies, R. A. & Shank, C. V. The first step in vision: femtosecond isomerization of rhodopsin. Science 254, 412 (1991).

  2. 2.

    Polli, D. et al. Conical intersection dynamics of the primary photoisomerization event in vision. Nature 467, 440–443 (2010).

  3. 3.

    Saha, S. & Stoddart, J. F. Photo-driven molecular devices. Chem. Soc. Rev. 36, 77–92 (2007).

  4. 4.

    Bonnet, S. & Collin, J.-P. Ruthenium-based light-driven molecular machine prototypes: synthesis and properties. Chem. Soc. Rev. 37, 1207–1217 (2008).

  5. 5.

    Jean-Ruel, H. et al. Ring-closing reaction in diarylethene captured by femtosecond electron crystallography. J. Phys. Chem. B 117, 15894–15902 (2013).

  6. 6.

    Pieroni, O., Fissi, A., Angelini, N. & Lenci, F. Photoresponsive polypeptides. Acc. Chem. Res. 34, 9–17 (2001).

  7. 7.

    Koshima, H., Ojima, N. & Uchimoto, H. Mechanical motion of azobenzene crystals upon photoirradiation. J. Am. Chem. Soc. 131, 6890–6891 (2009).

  8. 8.

    Liu, D., Bastiaansen, C. W. M., den Toonder, J. M. J. & Broer, D. J. Light-induced formation of dynamic and permanent surface topologies in chiral–nematic polymer networks. Macromolecules 45, 8005–8012 (2012).

  9. 9.

    Kanai, Y., Srinivasan, V., Meier, S. K., Vollhardt, K. P. C. & Grossman, J. C. Mechanism of thermal reversal of the (Fulvalene)tetracarbonyldiruthenium photoisomerization: toward molecular solar–thermal energy storage. Angew. Chem. Int. Ed. 49, 8926–8929 (2010).

  10. 10.

    Kucharski, T. J., Tian, Y., Akbulatov, S. & Boulatov, R. Chemical solutions for the closed-cycle storage of solar energy. Energy Environ. Sci. 4, 4449–4472 (2011).

  11. 11.

    Moth-Poulsen, K. et al. Molecular solar thermal (MOST) energy storage and release system. Energy Environ. Sci. 5, 8534–8537 (2012).

  12. 12.

    Domcke, W., Yarkony, D. & Köppel, H. in Advanced Series in Physical Chemistry (ed. Ng, C.-Y.) (World Scientific, Singapore, 2004).

  13. 13.

    Worth, G. A. & Cederbaum, L. S. Beyond Born-Oppenheimer: molecular dynamics through a conical intersection. Annu. Rev. Phys. Chem. 55, 127–158 (2004).

  14. 14.

    To, T. T. et al. Development of ultrafast photochromic organometallics and photoinduced linkage isomerization of arene chromium carbonyl derivatives. J. Phys. Chem. A 113, 2666–2676 (2009).

  15. 15.

    McClure, B. A. & Rack, J. J. Isomerization in photochromic ruthenium sulfoxide complexes. Eur. J. Inorg. Chem. 2010, 3895–3904 (2010).

  16. 16.

    Harvey, E. C., Feringa, B. L., Vos, J. G., Browne, W. R. & Pryce, M. T. Transition metal functionalized photo- and redox-switchable diarylethene based molecular switches. Coord. Chem. Rev. 282–283, 77–86 (2015).

  17. 17.

    King, A. W., Wang, L. & Rack, J. J. Excited state dynamics and isomerization in ruthenium sulfoxide complexes. Acc. Chem. Res. 48, 1115–1122 (2015).

  18. 18.

    Wong, H.-L., Yeung, M. C.-L. & Yam, V. W.-W. in 50 Years of Structure and Bonding – The Anniversary Volume (eds Michael, D. & Mingos, P.) 201–289 (Springer International Publishing, Switzerland, 2016).

  19. 19.

    Mockus, N. V., Rabinovich, D., Petersen, J. L. & Rack, J. J. Femtosecond isomerization in a photochromic molecular switch. Angew. Chem. Int. Ed. 47, 1458–1461 (2008).

  20. 20.

    McClure, B. A. & Rack, J. J. Two-color reversible switching in a photochromic ruthenium sulfoxide complex. Angew. Chem. Int. Ed. 48, 8556–8558 (2009).

  21. 21.

    McClure, B. A., Abrams, E. R. & Rack, J. J. Excited state distortion in photochromic ruthenium sulfoxide complexes. J. Am. Chem. Soc. 132, 5428–5436 (2010).

  22. 22.

    Göttle, A. J., Dixon, I. M., Alary, F., Heully, J.-L. & Boggio-Pasqua, M. Adiabatic versus nonadiabatic photoisomerization in photochromic ruthenium sulfoxide complexes: a mechanistic picture from density functional theory calculations. J. Am. Chem. Soc. 133, 9172–9174 (2011).

  23. 23.

    Garg, K., Engle, J. T., Ziegler, C. J. & Rack, J. J. Tuning excited state isomerization dynamics through ground state structural changes in analogous ruthenium and osmium sulfoxide complexes. Chem. Eur. J. 19, 11686–11695 (2013).

  24. 24.

    McClure, B. A. et al. Photochromic ruthenium sulfoxide complexes: evidence for isomerization through a conical intersection. Inorg. Chem. 48, 8084–8091 (2009).

  25. 25.

    McClure, B. A. & Rack, J. J. Ultrafast spectroscopy of a photochromic ruthenium sulfoxide complex. Inorg. Chem. 50, 7586–7590 (2011).

  26. 26.

    Rachford, A. A. & Rack, J. J. Picosecond isomerization in photochromic ruthenium–dimethyl sulfoxide complexes. J. Am. Chem. Soc. 128, 14318–14324 (2006).

  27. 27.

    Li, H. et al. Photoisomerization mechanism of ruthenium sulfoxide complexes: role of the metal-centered excited state in the bond rupture and bond construction processes. Chemistry 22, 14285–14292 (2016).

  28. 28.

    Vieuxmaire, O. P. J. et al. Theoretical investigation of phosphinidene oxide polypyridine ruthenium(II) complexes: toward the design of a new class of photochromic compounds. J. Phys. Chem. A 117, 12821–12830 (2013).

  29. 29.

    Göttle, A. J., Alary, F., Dixon, I. M., Heully, J.-L. & Boggio-Pasqua, M. Unravelling the S→O linkage photoisomerization mechanisms in cis- and trans-[Ru(bpy)2(DMSO)2]2+ using density functional theory. Inorg. Chem. 53, 6752–6760 (2014).

  30. 30.

    Sanz García, J. et al. Establishing the two-photon linkage isomerization mechanism in the nitrosyl complex trans-[RuCl(NO)(py)4]2+ by DFT and TDDFT. Inorg. Chem. 54, 8310–8318 (2015).

  31. 31.

    García, J. S., Alary, F., Boggio-Pasqua, M., Dixon, I. M. & Heully, J.-L. Is photoisomerization required for NO photorelease in ruthenium nitrosyl complexes? J. Mol. Model. 22, 284 (2016).

  32. 32.

    Sanz García, J. et al. A theoretical study of the N to O linkage photoisomerization efficiency in a series of ruthenium mononitrosyl complexes. Molecules 22, 1667 (2017).

  33. 33.

    Talotta, F. et al. Linkage photoisomerization mechanism in a photochromic ruthenium nitrosyl complex: new insights from an MS-CASPT2 study. J. Chem. Theory Comput. 13, 6120–6130 (2017).

  34. 34.

    Van Kuiken, B. E. & Khalil, M. Simulating picosecond iron K-edge X-ray absorption spectra by ab initio methods to study photoinduced changes in the electronic structure of Fe(II) spin crossover complexes. J. Phys. Chem. A 115, 10749–10761 (2011).

  35. 35.

    Van Kuiken, B. E. et al. Probing the electronic structure of a photoexcited solar cell dye with transient X-ray absorption spectroscopy. J. Phys. Chem. Lett. 3, 1695–1700 (2012).

  36. 36.

    Van Kuiken, B. E. et al. Simulating Ru L-3-Edge X-ray absorption spectroscopy with time-dependent density functional theory: model complexes and electron localization in mixed-valence metal dimers. J. Phys. Chem. A 117, 4444–4454 (2013).

  37. 37.

    Van Kuiken, B. et al. Time-Resolved X-ray spectroscopy in the water window: elucidating transient valence charge distributions in aqueous Fe(II) complexes. J. Phys. Chem. Lett. 7, 465–470 (2016).

  38. 38.

    Hong, K., Cho, H., Schoenlein, R. W., Kim, T. K. & Huse, N. Element-specific characterization of transient electronic structure of solvated Fe(II) complexes with time-resolved soft X-ray absorption spectroscopy. Acc. Chem. Res. 48, 2957–2966 (2015).

  39. 39.

    Cho, H. et al. Electronic and molecular structure of the transient radical photocatalyst Mn(CO)5 and its parent compound Mn2(CO)10. Inorg. Chem. 55, 5895–5903 (2016).

  40. 40.

    Gawelda, W. et al. Electronic and molecular structure of photoexcited [RuII(bpy)3]2+ probed by picosecond X-ray absorption spectroscopy. J. Am. Chem. Soc. 128, 5001–5009 (2006).

  41. 41.

    Pickering, I. J., Prince, R. C., Divers, T. & George, G. N. Sulfur K-edge X-ray absorption spectroscopy for determining the chemical speciation of sulfur in biological systems. FEBS Lett. 441, 11–14 (1998).

  42. 42.

    Wagenknecht, P. S. & Ford, P. C. Metal centered ligand field excited states: their roles in the design and performance of transition metal based photochemical molecular devices. Coord. Chem. Rev. 255, 591–616 (2011).

  43. 43.

    Frisch, M. J. et al. Gaussian 09 Revision D.01, Gaussian Inc., Wallingford CT (2009).

  44. 44.

    Adamo, C. & Barone, V. Toward reliable density functional methods without adjustable parameters: The PBE0 model. J. Chem. Phys. 110, 6158–6170 (1999).

  45. 45.

    Weigend, F. & Ahlrichs, R. Balanced basis sets of split valence, triple zeta valence and quadruple zeta valence quality for H to Rn: Design and assessment of accuracy. Phys. Chem. Chem. Phys. 7, 3297–3305 (2005).

  46. 46.

    Andrae, D., Häußermann, U., Dolg, M., Stoll, H. & Preuß, H. Energy-adjustedab initio pseudopotentials for the second and third row transition elements. Theor. Chim. Acta 77, 123–141 (1990).

  47. 47.

    Gonzalez, C. & Schlegel, H. B. An improved algorithm for reaction path following. J. Chem. Phys. 90, 2154–2161 (1989).

  48. 48.

    Gonzalez, C. & Schlegel, H. B. Reaction path following in mass-weighted internal coordinates. J. Phys. Chem. 94, 5523–5527 (1990).

  49. 49.

    Neese, F. The ORCA program system. WIREs Comput. Mol. Sci. 2, 73–78 (2012).

  50. 50.

    Neese, F., Wolf, A., Fleig, T., Reiher, M. & Hess, B. A. Calculation of electric-field gradients based on higher-order generalized Douglas–Kroll transformations. J. Chem. Phys. 122, 204107 (2005).

  51. 51.

    Klamt, A. & Schuurmann, G. COSMO: a new approach to dielectric screening in solvents with explicit expressions for the screening energy and its gradient. J. Chem. Soc. Perkin Trans. 2, 799–805 (1993).

  52. 52.

    Petrenko, T., Kossmann, S. & Neese, F. Efficient time-dependent density functional theory approximations for hybrid density functionals: analytical gradients and parallelization. J. Chem. Phys. 134, 054116 (2011).

  53. 53.

    Neese, F. An improvement of the resolution of the identity approximation for the formation of the Coulomb matrix. J. Comput. Chem. 24, 1740–1747 (2003).

  54. 54.

    Neese, F., Wennmohs, F., Hansen, A. & Becker, U. Efficient, approximate and parallel Hartree–Fock and hybrid DFT calculations. A ‘chain-of-spheres’ algorithm for the Hartree–Fock exchange. Chem. Phys. 356, 98–109 (2009).

  55. 55.

    Pantazis, D. A., Chen, X.-Y., Landis, C. R. & Neese, F. All-electron scalar relativistic basis sets for third-row transition metal atoms. J. Chem. Theory Comput. 4, 908–919 (2008).

Download references

Acknowledgements

This work was supported by the U.S. Department of Energy, Office of Science, Basic Energy Sciences, Chemical Sciences, Geosciences, and Biosciences Division. This research used resources of the Advanced Light Source, Lawrence Berkeley National Laboratory, which is a DOE Office of Science User Facility. T.K.K. acknowledges funding from the National Research Foundation (NRF) grants, funded by the Ministry of Science and ICT (No. 2016K2A9A1A01945137, 2016R1E1A1A01941978, 2014R1A4A1001690, and 2016K1A4A4A01922028). N.H. acknowledges funding from the Max Planck Society, the City of Hamburg, and the German Science Foundation (DFG) through the SFB 925 “Light induced dynamics and control of correlated quantum systems”. J.J.R. and K.G. acknowledge funding from the National Science Foundation (CHE 0947031, CHE 1112250, and CHE 1602240).

Author information

J.H.L., K.H., A.A.C, H.C., N.H., T.K.K., and R.W.S. designed and carried out the TR-XAS experiments. K.G. and J.J.R. provided the sample. K.H. and J.H.L., advised by M.B.P., carried out DFT calculations. J.H.L. provided the kinetic analysis. All authors contributed to the analysis of results and manuscript text.

Correspondence to Nils Huse or Robert W. Schoenlein or Tae Kyu Kim.

Ethics declarations

Competing interests

The authors declare no competing interests.

Additional information

Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Electronic supplementary material

Rights and permissions

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Cordones, A.A., Lee, J.H., Hong, K. et al. Transient metal-centered states mediate isomerization of a photochromic ruthenium-sulfoxide complex. Nat Commun 9, 1989 (2018). https://doi.org/10.1038/s41467-018-04351-0

Download citation

Further reading

Comments

By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.