## Abstract

Collective measurements on identically prepared quantum systems can extract more information than local measurements, thereby enhancing information-processing efficiency. Although this nonclassical phenomenon has been known for two decades, it has remained a challenging task to demonstrate the advantage of collective measurements in experiments. Here, we introduce a general recipe for performing deterministic collective measurements on two identically prepared qubits based on quantum walks. Using photonic quantum walks, we realize experimentally an optimized collective measurement with fidelity 0.9946 without post selection. As an application, we achieve the highest tomographic efficiency in qubit state tomography to date. Our work offers an effective recipe for beating the precision limit of local measurements in quantum state tomography and metrology. In addition, our study opens an avenue for harvesting the power of collective measurements in quantum information-processing and for exploring the intriguing physics behind this power.

## Introduction

Quantum measurements are the key for extracting information from quantum systems and for connecting the quantum world with the classical world. Understanding the power and limitation of measurements is of paramount importance not only to foundational studies, but also to many applications, such as quantum tomography, metrology, and communication^{1,2,3,4,5,6,7,8}. An intriguing phenomenon predicted by quantum theory is that collective measurements on identically prepared quantum systems may extract more information than local measurements on individual systems, thereby leading to higher tomographic efficiency and precision^{9,10,11,12,13,14}. The significance of collective measurements for multiparameter quantum metrology was also recognized recently^{15,16}. This nonclassical phenomenon is owing to entanglement in the quantum measurements instead of quantum states. It is closely tied to the phenomenon of “nonlocality without entanglement”^{17}. In addition, collective measurements are very useful in numerous other tasks, such as distilling entanglement^{18}, enhancing nonlocal correlations^{19}, and detecting quantum change point^{20}. However, demonstrating the advantage of collective measurements in experiments has remained a daunting task. This is because most optimized protocols entail generalized entangling measurements on many identically prepared quantum systems, which are very difficult to realize deterministically.

Here we introduce a general method for performing deterministic collective measurements on two identically prepared qubits based on quantum walks, which extends the method for performing generalized measurements on a single qubit only^{21,22,23}. By devising photonic quantum walks, we realize experimentally a highly efficient collective measurement highlighted in refs. ^{11,13,14}. As an application, we realize, for the first time, qubit state tomography with deterministic collective measurements. The protocol we implemented is significantly more efficient than local measurements commonly employed in most experiments. Moreover, it can achieve near-optimal performance over all two-copy collective measurements with respect to various figures of merit without using adaptive measurements. Such high efficiency demonstrates the main advantage of collective measurements over separable measurements. Here, we encode the two qubits in the two degrees of freedom of a single photon^{24,25,26,27}, but our method for performing collective measurements can be generalized to two-photon two-qubit states by combining the technique of quantum joining^{28} or teleportation^{29}.

## Results

### Optimized collective measurements

In quantum theory, a measurement is usually represented by a positive-operator-valued measure (POVM), which is composed of a set of positive operators that sum up to the identity. In traditional quantum information-processing, measurements are performed on individual quantum systems one by one, which often cannot extract information efficiently. Fortunately, quantum theory allows us to perform collective measurements on identically prepared quantum systems in a way that has no classical analog, as illustrated in Fig. 1.

In the case of a qubit, a special two-copy collective POVM was highlighted in refs.^{11,13,14}, which consists of five POVM elements,

where \(\left| {{\mathrm{\Psi }}_ - } \right\rangle = \frac{1}{{\sqrt 2 }}\left( {\left| {01} \right\rangle - \left| {10} \right\rangle } \right)\) is the singlet, which is maximally entangled, and \(\left| {\psi _j} \right\rangle\) for *j* = 1, 2, 3, 4 are qubit states that form a symmetric informationally complete POVM (SIC-POVM), that is, \(\left| {\left\langle {\psi _j\left| {\psi _k} \right.} \right\rangle } \right|^2\) = (2*δ*_{
jk
} + 1)/3^{30,31}. Geometrically, the Bloch vectors of the four states \(\left| {\psi _j} \right\rangle\) form a regular tetrahedron inside the Bloch sphere. For concreteness, here we choose

The POVM defined by Eqs. (1) and (2) is referred to as the collective SIC-POVM henceforth. If this POVM is performed on the two-copy state *ρ*^{⊗2}, then the probability of obtaining outcome *j* is given by *p*_{
j
} = tr(*ρ*^{⊗2}*E*_{
j
}).

The collective SIC-POVM is distinguished because it is optimal in extracting information from a pair of identical qubits^{9,11}. It is universally Fisher symmetric in the sense of providing uniform and maximal Fisher information on all parameters that characterize the quantum states of interest^{13,14,32}. Moreover, it is unique such POVM with no more than five outcomes. Consequently, the collective SIC-POVM is significantly more efficient than any local measurement in many quantum information-processing tasks, including tomography and metrology. Moreover, its high tomographic efficiency is achieved without using adaptive measurements, which is impossible for local measurements. As far as two-copy collective measurements are concerned, surprisingly, more entangled measurements, such as the Bell measurements, cannot lead to higher efficiency. Although multi-copy (say three-copy) collective measurements can further improve the efficiency, the improvement is not so significant^{13,14}.

### Realization of the collective SIC-POVM via quantum walks

Recently, discrete quantum walks were proposed as a recipe for implementing general POVMs on a single qubit^{21}, which have been demonstrated in experiments^{22,23}. In a one-dimensional discrete quantum walk, the system state is characterized by two degrees of freedom \(\left| {x,c} \right\rangle\), where *x* = …, −1, 0, 1, … denotes the walker position, and *c* = 0, 1 represents the coin state. The dynamics of each step is described by a unitary transformation of the form *U*(*t*) = *TC*(*t*), where

is the conditional translation operator, and *C*(*t*) = \(\mathop {\sum}\nolimits_x \left| x \right\rangle \left\langle x \right| \otimes C(x,t)\) with *C*(*x*, *t*) being site-dependent coin operators. A general POVM on a qubit can be realized by engineering the coin operators *C*(*x*, *t*) followed by measuring the walker position after certain steps. However, little is known in the literature on realizing POVMs on higher-dimensional systems. Here, we propose a general method for extending the capabilities of quantum walks. For concreteness, we illustrate our approach with the collective SIC-POVM.

To realize the collective SIC-POVM using quantum walks, the coin qubit and the walker in positions 1 and −1 are taken as the two-qubit system of interest, whereas the other positions of the walker act as an ancilla. With this choice, the collective SIC-POVM can be realized with five-step quantum walks, as illustrated in Fig. 1d and discussed in more details in Supplementary Note 1. Here, the nontrivial coin operators *C*(*x*, *t*) are specified in the Methods section. The five detectors *E*_{1} to *E*_{5} marked in the figure correspond to the five POVM elements specified in Eqs. (1) and (2). Moreover, this proposal can be implemented using photonic quantum walks, as illustrated in Fig. 2 (see also Supplementary Fig. 1).

### Experimental setup

The experimental setup for realizing the collective SIC-POVM and its application in quantum state tomography is presented in Fig. 2. The setup is composed of two modules designed for two-copy state-preparation and collective measurements, respectively.

The two-copy collective measurement module performs the collective SIC-POVM based on quantum walks, as illustrated in Fig. 1d (cf. Supplementary Fig. 1). Here the conditional translation operator *T* is realized by interferometrically stable beam displacers (BDs)^{33,34,35,36}, which displace the component with horizontal polarization (*H*) away from the component with vertical polarization (*V*). The coin operators *C*(*x*, *t*) are realized by suitable combinations of half wave plates (HWPs) and quarter wave plates (QWPs), with rotation angles specified in the table embedded in Fig. 2.

In the two-copy state-preparation module, we first prepare copy 1 in the path degree of freedom, i.e., the walker qubit encoded in positions 1 and −1 (see **a** in Fig. 2). A pair of 1-mm-long BBO crystals with optical axes perpendicular to each other, cut for type-1 phase-matched spontaneous parametric down-conversion (SPDC) process, is pumped by a 40-mW H-polarized beam at 404 nm. The polarization state of the beam is prepared as \({\mathrm{cos}}{\kern 1pt} 2\alpha _1\left| H \right\rangle\) + \({\mathrm{sin}}{\kern 1pt} 2\alpha _1\left| V \right\rangle\) when the deviation angle of the HWP at 404 nm is set at *α*_{1}. After the SPDC process, a pair of photons with wave length *λ* = 808 nm is created in the state of \({\mathrm{sin}}{\kern 1pt} 2\alpha _1\left| {HH} \right\rangle\) + \({\mathrm{cos}}{\kern 1pt} 2\alpha _1\left| {VV} \right\rangle\)^{37}. The two photons pass through two interference filters whose FWHM (full width at half maximum) is 3 nm, resulting in a coherence length of 270*λ*. One photon is detected by a single-photon detector acting as a trigger. After tracing out this photon, the other photon is prepared in the state \({\mathrm{sin}}^{\mathrm{2}}{\kern 1pt} 2\alpha _1\left| H \right\rangle \left\langle H \right|\) + \({\mathrm{cos}}^{\mathrm{2}}{\kern 1pt} 2\alpha _1\left| V \right\rangle \left\langle V \right|\), whose purity is controlled by *α*_{1}. Two HWPs (not shown in Fig. 2) at the input and output ports of the single-mode fiber are used to maintain the polarization state of the photon. After passing a HWP and a QWP with deviation angles *h*_{1}, *q*_{1}, the photon is prepared in the desired state *ρ*. To encode the polarization state into the path degree of freedom, BD_{0} is used to displace the H-component into path 1, which is 4-mm away from the V-component in path −1; then a HWP with deviation angle *h*_{3} = 45° is placed in path 1. The resulting photon is described by the state \(\rho \otimes \left| V \right\rangle \left\langle V \right|\).

Then we encode the second copy of *ρ* into the polarization degree of freedom (coin qubit) using two HWPs, a quartz crystal with a decoherence length of 385*λ*, and a QWP (see **b** in Fig. 2). The first HWP with rotation angle *α*_{2} and the quartz crystal prepare the polarization state \({\mathrm{sin}}^2{\kern 1pt} 2\alpha _2\left| H \right\rangle \left\langle H \right|\) + \({\mathrm{cos}}^2{\kern 1pt} 2\alpha _2\left| V \right\rangle \left\langle V \right|\) with desired purity. Then the direction of the Bloch vector of the polarization state is adjusted by a HWP and a QWP with deviation angles *h*_{2} and *q*_{2}. In this way, we can prepare the desired two-copy state *ρ* ⊗ *ρ*, the first copy of which is encoded in the path degree of freedom, whereas the second one in the polarization degree of freedom.

The two-copy state-preparation module described above is capable of preparing any two-copy state (see Supplementary Note 2 for more details). Next, the two-copy state *ρ* ⊗ *ρ* is sent into the two-copy collective measurement module, which performs the collective SIC-POVM based on quantum walks, as described before. It is worth pointing out that the collective SIC-POVM can also be applied to measure arbitrary two-qubit states, although we focus on two-copy qubit states in this work.

### Verification and tomography of the collective SIC-POVM

To verify the experimental implementation of the collective SIC-POVM, we took the conventional method of measuring the probability distributions after preparing the input states as normalized POVM elements, i.e., \(\hat E_i = E_i{\mathrm{/tr}}\left( {E_i} \right)\) for *i* = 1, …, 5. These input states can be prepared by choosing proper rotation angles *α*_{1}, *h*_{1}, *q*_{1}, *h*_{3}, *α*_{2}, *h*_{2}, *q*_{2} as specified in Supplementary Table 1. The measurement probability distributions are shown in Fig. 3, which agree very well with the theoretical prediction.

To accurately characterize the POVM elements that were actually realized, we then performed quantum measurement tomography. Overall, 36 input states, the tensor products of the six eigenstates of three Pauli operators, were prepared and sent to the collective measurement module, with each setting repeated 35,000 times. Then the five POVM elements were estimated from the measurement statistics using the maximum likelihood method developed in ref.^{38}. The fidelities of the five POVM elements estimated are 0.9991 ± 0.0001, 0.9979 ± 0.0007, 0.9870 ± 0.0008, 0.9927 ± 0.0002 and 0.9961 ± 0.0002, respectively; the overall fidelity of the POVM (cf. the Methods section) is 0.9946 ± 0.0002. Here, the error bars denote the standard deviations of 100 simulations from Poisson statistics. Such high fidelities demonstrate that the collective SIC-POVM was realized with very high quality. Detailed information about the five reconstructed POVM elements can be found in Supplementary Note 3 and Supplementary Fig. 2.

### Quantum state tomography with the collective SIC-POVM

The experimental realization of the collective SIC-POVM enables us to achieve unprecedented efficiency in quantum state tomography. In this section we demonstrate the tomographic significance of the collective SIC-POVM and the power of collective measurements.

In the first experiment, we investigated the scaling of the mean infidelity 1 − *F* achieved by the collective SIC-POVM with the sample size *N* (the number of copies of the state available for tomography). Three pure states with Bloch vectors (0, 0, 1), \(\frac{1}{{\sqrt 2 }}\)(1, 0, 1), and \(\frac{1}{{\sqrt 3 }}\)(1, 1, 1) were considered (see Supplementary Note 4 and Supplementary Fig. 3 for additional results on mixed states). In each case, the probabilities of obtaining the outcomes of the collective SIC-POVM were estimated from frequencies of repeated measurements, from which we reconstructed the original state using the maximum likelihood method^{4}; see Supplementary Note 5 and Supplementary Fig. 4.

The experimental result and simulation result are shown in Fig. 4. Also shown as benchmarks are the simulation results on two popular alternative schemes: one based on mutually unbiased bases (MUB) for a qubit^{39,40,41,42} and the other based on two-step adaptive measurements proposed in ref. ^{43} (cf. refs.^{44,45,46}). The experimental result agrees very well with the theoretical predication^{14} and numerical simulation. The efficiency of the collective SIC-POVM is almost independent of the input state; the infidelity approximately scales as *O*(1/*N*) for all states investigated (cf. Supplementary Table 2). This high efficiency is tied to the fact that the probability of obtaining the outcome *E*_{5} in Eq. (1) is very sensitive to the purity of the input state, so that the purity can be estimated very accurately. By contrast, the scaling behavior is much worse for MUB except when the input state aligns with one of the POVM elements, which corresponds to “known state tomography”^{43}. This is because the infidelity is very sensitive to inaccurate estimation of the purity, which is unavoidable for a fixed individual measurement. For a generic pure state, the infidelity achieved by the collective SIC-POVM for *N* = 2048 is ~ 12 (three) times smaller than that achieved by MUB (local adaptive measurements). The advantage of the collective SIC-POVM becomes more significant as the sample size increases.

In the second experiment, we investigated the mean infidelity achieved by the collective SIC-POVM when the input states have the form \(\left| {\psi (\theta )} \right\rangle\) = \({\mathrm{sin}}{\kern 1pt} \theta \left| 0 \right\rangle + {\mathrm{cos}}{\kern 1pt} \theta \left| 1 \right\rangle\) with *θ* ranging from 0 to *π*/2. Here *N* is chosen to be 128 (that is, 64 pairs) or 1024 (512 pairs). The result shown in Fig. 5 further demonstrates that the efficiency of the collective SIC-POVM is almost independent of the input state. In addition, the infidelity in the worst scenario is much smaller than that achieved by MUB and local adaptive measurements. As in the first experiment, the advantage of the collective SIC-POVM becomes more significant when *N* increases.

In the third experiment, we considered two families of mixed states \(\rho = \frac{1}{2}\)(*I* + **s** ⋅ *σ*) with Bloch vectors along \(\widehat {\bf{s}}\) = (0, 0, −1) and \(\widehat {\bf{s}}\) = (0.490, −0.631, 0.602), respectively, and with *s* ranging from 0 to 1. The sample size *N* is chosen to be 256; both the mean infidelity and mean square error (MSE) are considered as figures of merit. The experimental result is shown in Fig. 6. The mean infidelity achieved by the collective SIC-POVM is not only smaller than that by MUB, but also smaller than the Gill-Massar (GM) bound^{13,44,47}, which constrains the performance of any local measurement, even with adaptive choices. Moreover, the mean infidelity approximately saturates a bound derived in refs. ^{13,14}, which represents the best performance that can be achieved by two-copy collective measurements; cf. the Methods section. In addition, the collective SIC-POVM is also nearly optimal with respect to the MSE for all states. Remarkably, such high efficiency is achieved without any adaptive measurement.

## Discussion

In summary, we introduced a general method for implementing deterministic collective measurements on two identically prepared qubits based on quantum walks. Using photonic quantum walks, we then realized experimentally the collective SIC-POVM with very high quality and thereby achieved unprecedented high efficiency in qubit state tomography. The collective SIC-POVM we realized is significantly more efficient than any local measurement. It improves the scaling of the mean infidelity in the worse scenario from \(O\left( {1{\mathrm{/}}\sqrt N } \right)\) to *O*(1/*N*). Moreover, it is nearly optimal over all two-copy collective measurements with respect to various figures of merit, including the mean infidelity and MSE, although no adaptive measurement is required. This high efficiency manifests the primary advantage of collective measurements over separable measurements.

Our work demonstrated a truly nonclassical phenomenon that is owing to entanglement in quantum measurements instead of quantum states. Moreover, it offers an effective recipe for exceeding the precision limit of local measurements in quantum state tomography. Similar idea can readily be applied to enhance the precision in multiparameter quantum metrology. For example, in the joint estimation of phase and phase diffusion, it was shown in ref. ^{15} that collective measurements can lead to higher precision than local measurements. Recently, this prediction was verified in a proof-of-principle experiment based on probabilistic Bell measurements^{16}. Our technique for implementing deterministic collective measurements may help demonstrate the practical advantage of collective measurements in quantum metrology. More generally, our work opens an avenue for exploring the power of collective measurements in quantum information processing. In the future, it would be desirable to extend our approach to realize multi-copy collective measurements on qubits and systems of higher dimensions.

## Methods

### Coin operators for realizing the collective SIC-POVM

Here, we present the coin operators that appear in Fig. 1d; see Supplementary Note 1 for more details.

### Fidelity between two POVMs

Consider two POVMs \(\left\{ {E_j} \right\}_{j = 1}^M\) and \(\left\{ {E_{j\prime }} \right\}_{j = 1}^M\) on a *d*-dimensional Hilbert space with the same number of elements, where \(E_{j\prime}\) is the counterpart of *E*_{
j
} (for example, one is the experimental realization of the other). Construct two normalized quantum states as \(\sigma = \frac{1}{d}\mathop {\sum}\nolimits_{j = 1}^M {\kern 1pt} E_j \otimes \left( {\left| j \right\rangle \left\langle j \right|} \right)\) and \(\sigma {\prime} = \frac{1}{d}\mathop {\sum}\nolimits_{j = 1}^M {\kern 1pt} E_{j\prime} \otimes \left( {\left| j \right\rangle \left\langle j \right|} \right)\), where \(\left| j \right\rangle\) form an orthonormal basis for an ancilla system. The fidelity between the two POVMs \(\left\{ {E_j} \right\}_{j = 1}^M\) and \(\left\{ {E_{j\prime} } \right\}_{j = 1}^M\) is defined as the fidelity between the two states *σ* and *σ*′,

where \(w_j = \frac{{\sqrt {{\mathrm{tr}}\left( {E_j} \right){\mathrm{tr}}\left( {E_{j\prime} } \right)} }}{d}\), and \(F_j = F\left( {\frac{{E_j}}{{{\mathrm{tr}}\left( {E_j} \right)}},\frac{{E_{j\prime} }}{{{\mathrm{tr}}\left( {E_{j\prime }} \right)}}} \right)\) is the fidelity between the two normalized POVM elements \(\frac{{E_j}}{{{\mathrm{tr}}\left( {E_j} \right)}}\) and \(\frac{{E_{j\prime} }}{{{\mathrm{tr}}\left( {E_{j\prime }} \right)}}\).

### GM bounds and collective bounds

In quantum state tomography with individual measurements (including local adaptive measurements), the precision achievable is constrained by the GM bound^{13,44,47} (see also ref. ^{48}). In the case of a qubit, the GM bound is \(\frac{9}{{4N}}\) when the figure of merit is the mean infidelity (approximately equal to the mean square Bures distance), where *N* is the sample size (assuming *N* is not too small). When the figure of merit is the MSE \({\Bbb E}{\kern 1pt} {\mathrm{tr}}\left[ {\left( {\hat \rho - \rho } \right)^2} \right]\), the GM bound is \(\frac{{\left( {2 + \sqrt {1 - s^2} } \right)^2}}{{2N}}\), where *s* is the length of the Bloch vector of the qubit state.

When collective measurements on two identical qubits are allowed, the precision limit is constrained by a collective bound. According to Eqs. (6.73) and (6.74) in ref. ^{13} with *t* = 3/2, the collective bound for the mean infidelity (mean square Bures distance) is \(\frac{3}{{2N}}\) (cf. ref. ^{14}), and the bound for the MSE is

The GM bound and collective bound for the mean infidelity may be violated when the state is nearly pure (with thresholds depending on *N*), in which case common estimators (including the maximum likelihood estimator) are biased due to the boundary of the state space. The precision limits with respect to the MSE are less sensitive to this influence.

### Data availability

The data that support the results of this study are available from the corresponding authors upon request.

## Additional information

**Publisher's note:** Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

## References

- 1.
Helstrom, C. W.

*Quantum Detection and Estimation Theory*. (Academic Press, NY, 1976). - 2.
Holevo, A. S.

*Probabilistic and Statistical Aspects of Quantum Theory*. (North-Holland, Amsterdam, 1982). - 3.
Braunstein, S. L. & Caves, C. M. Statistical distance and the geometry of quantum states.

*Phys. Rev. Lett.***72**, 3439–3443 (1994). - 4.
Paris, M. G. A & Řeháček, J. (eds).

*Quantum State Estimation*, vol. 649 of Lecture Notes in Physics. (Springer, Berlin, 2004). - 5.
Lvovsky, A. I. & Raymer, M. G. Continuous-variable optical quantum-state tomography.

*Rev. Mod. Phys.***81**, 299 (2009). - 6.
Riedel, M. F. et al. Atom-chip-based generation of entanglement for quantum metrology.

*Nature***464**, 1170–1173 (2010). - 7.
Giovannetti, V., Lloyd, S. & Maccone, L. Advances in quantum metrology.

*Nat. Photonics***5**, 222 (2011). - 8.
Szczykulska, M., Baumgratz, T. & Datta, A. Multi-parameter quantum metrology.

*Adv. Phys.***1**, 621–639 (2016). - 9.
Massar, S. & Popescu, S. Optimal extraction of information from finite quantum ensembles.

*Phys. Rev. Lett.***74**, 1259–1263 (1995). - 10.
Gisin, N. & Popescu, S. Spin flips and quantum information for antiparallel spins.

*Phys. Rev. Lett.***83**, 432–435 (1999). - 11.
Vidal, G., Latorre, J. I., Pascual, P. & Tarrach, R. Optimal minimal measurements of mixed states.

*Phys. Rev. A.***60**, 126 (1999). - 12.
Bagan, E., Ballester, M. A., Gill, R. D., Muñoz-Tapia, R. & Romero-Isart, O. Separable measurement estimation of density matrices and its fidelity gap with collective protocols.

*Phys. Rev. Lett.***97**, 130501 (2006). - 13.
Zhu, H.

*Quantum State Estimation and Symmetric Informationally Complete POMs*. Ph.D. thesis, National University of Singapore (2012). - 14.
Zhu, H. & Hayashi, M. Universally Fisher-symmetric informationally complete measurements.

*Phys. Rev. Lett.***120**, 030404 (2018). - 15.
Vidrighin, M. D. et al. Joint estimation of phase and phase diffusion for quantum metrology.

*Nat. Commun.***5**, 3532 (2014). - 16.
Roccia, E. et al. Entangling measurements for multiparameter estimation with two qubits.

*Quantum Sci. Technol.***3**, 01LT01 (2018). - 17.
Bennett, C. H. et al. Quantum nonlocality without entanglement.

*Phys. Rev. A.***59**, 1070–1091 (1999). - 18.
Bennett, C. H. et al. Purification of noisy entanglement and faithful teleportation via noisy channels.

*Phys. Rev. Lett.***76**, 722–725 (1996). - 19.
Liang, Y.-C. & Doherty, A. C. Better Bell-inequality violation by collective measurements.

*Phys. Rev. A.***73**, 052116 (2006). - 20.
Sents, G., Bagan, E., Calsamiglia, J., Chiribella, G. & Muñoz Tapia, R. Quantum change point.

*Phys. Rev. Lett.***117**, 150502 (2016). - 21.
Kurzyński, P. & Wójcik, A. Quantum walk as a generalized measuring device.

*Phys. Rev. Lett.***110**, 200404 (2013). - 22.
Bian, Z. et al. Realization of single-qubit positive-operator-valued measurement via a one-dimensional photonic quantum walk.

*Phys. Rev. Lett.***114**, 203602 (2015). - 23.
Zhao, Y.-Y. et al. Experimental realization of generalized qubit measurements based on quantum walks.

*Phys. Rev. A.***91**, 042101 (2015). - 24.
Englert, B.-G., Kurtsiefer, C. & Weinfurter, H. Universal unitary gate for single-photon two-qubit states.

*Phys. Rev. A.***63**, 032303 (2001). - 25.
Fiorentino, M. & Wong, F. N. C. Deterministic controlled-not gate for single-photon two-qubit quantum logic.

*Phys. Rev. Lett.***93**, 070502 (2004). - 26.
Barreiro, J. T., Wei, T.-C. & Kwiat, P. G. Beating the channel capacity limit for linear photonic superdense coding.

*Nat. Phys.***4**, 282–286 (2008). - 27.
Rubino, G. et al. Experimental verification of an indefinite causal order.

*Sci. Adv.***3**, e1602589 (2017). - 28.
Vitelli, C. et al. Joining the quantum state of two photons into one.

*Nat. Photonics***7**, 521–526 (2013). - 29.
Ahnert, S. E. & Payne, M. C. All possible bipartite positive-operator-value measurements of two-photon polarization states.

*Phys. Rev. A.***73**, 022333 (2006). - 30.
Zauner, G. Quantum designs: Foundations of a noncommutative design theory.

*Int. J. Quantum Inform.***09**, 445–507 (2011). - 31.
Renes, J. M., Blume-Kohout, R., Scott, A. J. & Caves, C. M. Symmetric informationally complete quantum measurements.

*J. Math. Phys.***45**, 2171 (2004). - 32.
Li, N., Ferrie, C., Gross, J. A., Kalev, A. & Caves, C. M. Fisher-symmetric informationally complete measurements for pure states.

*Phys. Rev. Lett.***116**, 180402 (2016). - 33.
O’Brien, J. L., Pryde, G. J., White, A. G., Ralph, T. C. & Branning, D. Demonstration of an all-optical quantum controlled-not gate.

*Nature***426**, 264–267 (2003). - 34.
Rahimi-Keshari, S. et al. Direct characterization of linear-optical networks.

*Opt. Express***21**, 13450–13458 (2013). - 35.
Rab, A. S. et al. Entanglement of photons in their dual wave-particle nature.

*Nat. Commun.***8**, 915 (2017). - 36.
Shalm, L. K. et al. Strong loophole-free test of local realism.

*Phys. Rev. Lett.***115**, 250402 (2015). - 37.
Kwiat, P. G., Waks, E., White, A. G., Appelbaum, I. & Eberhard, P. H. Ultrabright source of polarization-entangled photons.

*Phys. Rev. A.***60**, R773–R776 (1999). - 38.
Fiurášek, J. Maximum-likelihood estimation of quantum measurement.

*Phys. Rev. A.***64**, 024102 (2001). - 39.
Wootters, W. K. & Fields, B. D. Optimal state–determination by mutually unbiased measurements.

*Ann. Phys.***191**, 363 (1989). - 40.
Durt, T., Englert, B.-G., Bengtsson, I. & Życzkowski, K. On mutually unbiased bases.

*Int. J. Quantum Inform.***08**, 535 (2010). - 41.
Adamson, R. B. A. & Steinberg, A. M. Improving quantum state estimation with mutually unbiased bases.

*Phys. Rev. Lett.***105**, 030406 (2010). - 42.
Zhu, H. Quantum state estimation with informationally overcomplete measurements.

*Phys. Rev. A.***90**, 012115 (2014). - 43.
Mahler, D. H. et al. Adaptive quantum state tomography improves accuracy quadratically.

*Phys. Rev. Lett.***111**, 183601 (2013). - 44.
Hou, Z., Zhu, H., Xiang, G.-Y., Li, C.-F. & Guo, G.-C. Achieving quantum precision limit in adaptive qubit state tomography.

*npj Quantum Inf.***2**, 16001 (2016). - 45.
Kravtsov, K. S. et al. Experimental adaptive Bayesian tomography.

*Phys. Rev. A.***87**, 062122 (2013). - 46.
Qi, B. et al. Adaptive quantum state tomography via linear regression estimation: Theory and two-qubit experiment.

*npj Quantum Inf.***3**, 19 (2017). - 47.
Gill, R. D. & Massar, S. State estimation for large ensembles.

*Phys. Rev. A.***61**, 042312 (2000). - 48.
Hayashi, M. A linear programming approach to attainable Cramér-Rao type bounds. In: O. Hirota, A. S. Holevo, C. M. Caves (eds).

*Quantum Communication, Computing, and Measurement*. (Plenum, NY, 1997).

## Acknowledgements

The work at USTC is supported by the National Natural Science Foundation of China under Grants (Nos. 11574291, 11774334, 61327901, and 11774335), the National Key Research and Development Program of China (No.2017YFA0304100), Key Research Program of Frontier Sciences, CAS (No.QYZDY-SSW-SLH003), the Fundamental Research Funds for the Central Universities (No.WK2470000026), and China Postdoctoral Science Foundation (Grant No. 2016M602012). HZ acknowledges financial support from the Excellence Initiative of the German Federal and State Governments (ZUK 81) and the DFG. J.S. acknowledges financial support from the ERC (Consolidator Grant 683107/TempoQ), and the DFG.

## Author information

### Affiliations

#### Key Laboratory of Quantum Information, University of Science and Technology of China, CAS, Hefei, 230026, P. R. China

- Zhibo Hou
- , Jun-Feng Tang
- , Yuan Yuan
- , Kang-Da Wu
- , Guo-Yong Xiang
- , Chuan-Feng Li
- & Guang-Can Guo

#### Synergetic Innovation Center of Quantum Information and Quantum Physics, University of Science and Technology of China, Hefei, 230026, P. R. China

- Zhibo Hou
- , Jun-Feng Tang
- , Yuan Yuan
- , Kang-Da Wu
- , Guo-Yong Xiang
- , Chuan-Feng Li
- & Guang-Can Guo

#### Naturwissenschaftlich-Technische Fakultät, Universität Siegen, Siegen, 57068, Germany

- Jiangwei Shang

#### Beijing Key Laboratory of Nanophotonics and Ultrafine Optoelectronic Systems, School of Physics, Beijing Institute of Technology, Beijing, 100081, China

- Jiangwei Shang

#### Institute for Theoretical Physics, University of Cologne, Cologne, 50937, Germany

- Huangjun Zhu

#### Department of Physics and Center for Field Theory and Particle Physics, Fudan University, Shanghai, 200433, China

- Huangjun Zhu

#### Institute for Nanoelectronic Devices and Quantum Computing, Fudan University, Shanghai, 200433, China

- Huangjun Zhu

#### State Key Laboratory of Surface Physics, Fudan University, Shanghai, 200433, China

- Huangjun Zhu

#### Collaborative Innovation Center of Advanced Microstructures, Nanjing, 210093, China

- Huangjun Zhu

#### Institute of Signal Processing Transmission, Nanjing University of Posts and Telecommunications, Nanjing, 210003, China

- Jian Li

#### Key Lab of Broadband Wireless Communication and Sensor Network Technology, Nanjing University of Posts and Telecommunications, Ministry of Education, Nanjing, 210003, China

- Jian Li

### Authors

### Search for Zhibo Hou in:

### Search for Jun-Feng Tang in:

### Search for Jiangwei Shang in:

### Search for Huangjun Zhu in:

### Search for Jian Li in:

### Search for Yuan Yuan in:

### Search for Kang-Da Wu in:

### Search for Guo-Yong Xiang in:

### Search for Chuan-Feng Li in:

### Search for Guang-Can Guo in:

### Contributions

HZ developed the theoretical approach; GYX supervised the project; ZBH, JFT, JL, and GYX designed the experiment and the measurement apparatus for the collective measurement; ZBH built the instruments, performed the experiment and collected the data with assistance from GYX, JFT, YY, and KDW; JS developed the maximum likelihood algorithm for quantum state tomography with collective measurements. ZBH, JS, HZ, and GYX performed numerical simulations and analyzed the experimental data with assistance from CFL and GCG; HZ, ZBH, JS, and GYX prepared and wrote the manuscript.

### Competing interests

The authors declare no competing interests.

### Corresponding authors

Correspondence to Huangjun Zhu or Guo-Yong Xiang.

## Electronic supplementary material

## Rights and permissions

**Open Access** This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.

## About this article

## Comments

By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.