Abstract
Acoustic metasurfaces represent a family of planar wavefrontshaping devices garnering increasing attention due to their capacity for novel acoustic wave manipulation. By precisely tailoring the geometry of these engineered surfaces, the effective refractive index may be modulated and, consequently, acoustic phase delays tuned. Despite the successful demonstration of phase engineering using metasurfaces, amplitude modulation remains overlooked. Herein, we present a class of metasurfaces featuring a hornlike spacecoiling structure, enabling acoustic control with simultaneous phase and amplitude modulation. The functionality of this class of metasurfaces, featuring a gradient in channel spacing, has been investigated theoretically and numerically and an equivalent model simplifying the structural behavior is presented. A metasurface featuring this geometry has been designed and its functionality in modifying acoustic radiation patterns experimentally validated. This class of acoustic metasurface provides an efficient design methodology enabling complete acoustic wave manipulation, which may find utility in applications including biomedical imaging, acoustic communication, and nondestructive testing.
Introduction
Acoustic wavefront modulation is of great interest given the numerous promising applications such as acoustic communication and biomedical imaging, among others. Traditionally, acoustic wavefront modulation has been realized in the context of phased array transducers, which, due to their complexity, are considered expensive in terms of both design and implementation aspects. In recent years, following successful achievements in electromagnetic wave manipulation using metamaterials and metasurface science^{1,2,3,4}, ongoing efforts have been made to utilize metasurfaces for acoustic wavefront modulation^{5,6,7,8,9,10,11}. Metasurfaces, engineered surfaces of subwavelength thickness, offer a unique approach to acoustic manipulation in which a desired wave pattern may be achieved by precisely designing the constituent unit cell structures. Among the unit cell structures reported to date, spacecoiling structures^{9, 10, 12,13,14,15,16,17} are drawing growing attention due to their incredibly simple structure, ease of fabrication, and demonstration of successful wavefront manipulation capacity. In these structures, the spacecoiling geometry is designed to generate the desired phase shift in the radiated acoustic signal, while mitigating the impedance mismatch in order to optimize power transmission and amplitude uniformity^{18}. Despite the fact that low transmission loss in such phasebased wavefront modulation yields high conversion efficiency^{19}, the complexity of the design process required to obtain a desired metasurface phase map remains a fundamental limitation. Typically, iterative or stochastic algorithms are required to derive the ideal phase map, relying on an appropriate initial guess in order to reach the global minimum^{20}. Moreover, transitioning from twodimensional (2D) to threedimensional (3D) phasebased wavefront manipulation approaches radically increases the design cost and complexity.
In the context of complete acoustic wave modulation, in which both phase and amplitude are simultaneously modulated, the additional degree of freedom leads to a marked simplification of the metasurface design process. As opposed to complicated optimization procedures required with phasebased wavefront modulation, complete acoustic wave modulation may leverage the timereversal technique in which the required phase and amplitude map may be readily obtained. Furthermore, by extending the properly designed unit cell structure to the 3D domain without additional complexity, acoustic metamaterial bricks or holograms may be generated to render 3D acoustic field patterns.
Although prior work has focused primarily on phase engineering, herein we demonstrate the possibility of simultaneous phase and amplitude modulation in a class of hornlike spacecoiling metasurfaces. Utilizing a gradient in channel spacing of the unit cells, full acoustic control over wavefront modulation is realized. We first demonstrate that conventional spacecoiling metamaterials possess a fundamental limitation in the simultaneous modulation of both phase and amplitude of transmitted wave acoustic waves. Specifically, the complex transmission through conventional spacecoiling structures is shown to be inherently bounded in certain complex regions. Subsequently, we extend the applicability of the presented bound to the general case of the metasurface and infer the necessary conditions for the realization of complete acoustic wavefront modulation. Ultimately, a modified, hornlike spacecoiling metamaterial structure is presented that satisfies the necessary conditions for complete acoustic wave modulation. Finally, the functionality of the hornlike spacecoiling metamaterial structure is theoretically and experimentally validated with regards to its capacity for simultaneous phase and amplitude modulation. This study seeks to shift the paradigm in acoustic metasurfaces through the realization of simultaneous control of phase and amplitude, thereby paving the way for a new generation of acoustic devices.
Results
Complete wave modulation in spacecoiling metamaterials
The concept of spacecoiling metamaterials was initially proposed by Liang et al.^{21}. It was demonstrated that acoustic waves with frequencies above a given cutoff value would propagate along an elongated path within an assembly of zigzag channels (Fig. 1a). The elongated path of the acoustic wave leads to the occurrence of a phase delay in the transmitted wave and, consequently, a higher refractive index is realized. Moreover, phenomena such as negative refractive index^{22}, zero index^{23}, and Diraclike dispersion^{24} have been also demonstrated using spacecoiling structures. Spacecoiling metamaterials possess marked advantages due to their simple structure and ease of design. It has been demonstrated that when the channel width (d) is sufficiently small with respect to the wavelength, the relative refractive index of the coiled structure (n_{r}: effective refractive index of coiled structure normalized by the original fluid index) can be precisely calculated using the path length of the acoustic wave shown in Fig. 1a^{21}. The relative refractive index can be expressed as:
where t is the overall length of the coiled structure and L_{eff} can be estimated as:
where N denotes the number of coils (for example, N = 7 in the structure depicted in Fig. 1a) and L is the length of each branch and is approximated as:
Given the expression for the relative refractive index of the coil structure, it can be represented as an equivalent model of the same dimensions but comprised a straight channel filled with a medium of refractive index of n_{r}n_{0} (shown in Fig. 1b) in which n_{0} represents the refractive index of the original fluid. Please note that from another perspective, the spacecoiling structure can also be modeled as a single straight channel structure similar to Fig. 1b and filled with the original fluid with refractive index of n_{0} but with an overall length of L_{eff}. By employing the equivalent model of the spacecoiling structure, one can derive the transmission coefficient, denoted as T, for a normally incident plane wave as follows:
where k_{0} is wave number associated with the medium inside the zigzag channel, a, d, and t (shown in Fig. 1a) represent the unit cell width, channel width, and unit cell length, respectively, and n_{r} is the relative refractive index discussed above. Through the rearrangement of terms in Eq. (4) (see Supplementary Note 1), the relationship between the phase and amplitude of the transmission coefficient is derived as follows:
Considering the fact that the term S in Eq. (6) is always greater than unity (S ≥ 1), the amplitude of the transmission coefficient for any transmitted phase (θ) is bounded by:
The lower bound occurs when the channel width (d) is significantly smaller than unit cell width (a). To further validate the presence of the aforementioned bound on sound transmission through a spacecoiled structure, the transmission coefficient has been derived analytically using the transfer matrix method (TMM). In this method, by employing modal analysis and applying boundary conditions within each coil, the transfer matrix has been obtained and, consequently, the transmission coefficient of the entire unit cell has been derived. Additional information regarding the details of the TMM solution are discussed in Supplementary Note 2. Using the TMM solution and by varying the geometries of the traditional spacecoiling structure, a large set of solutions has been investigated and the resultant transmission phases and amplitudes are depicted in Fig. 2. By comparing the bound (pink region) predicted by Eq. (7) resulting from the equivalent model and the set of results from the TMMbased solution, it can be observed that the set of results using the TMM fall within the predicted transmission bound, thereby ensuring the validity of the bound represented in Eq. (7). Given the presented transmission bound shown in Fig. 2, it is apparent that the conventional spacecoiling structure cannot be used for simultaneous phase and amplitude modulation. The bounded nature of the transmission phase and amplitude results in large portions of the phaseamplitude diagram being inaccessible and simultaneous modulation of phase and amplitude is essentially precluded. Of note, however, the conventional spacecoiling structure is capable of modulating the amplitude of the transmitted acoustic wave in specific instances. By tailoring the unit cell design and targeting a transmission phase of either π/2 or – π/2, the complete range of amplitude modulation is accessible (0–1). Nevertheless, the capacity for simultaneous and independent modulation of phase and amplitude is highly limited in the conventional class of spacecoiling structures.
Importantly, the transmission bound presented herein is generalizable for any arbitrary metasurface and is not limited to spacecoiling structures. Herein we investigate the origin of this transmission bound and analyze approaches to overcome this bound in order to yield full wavefront control below.
Considering a general metasurface with thickness of L_{m}, equivalent acoustic impedance of Z_{m} and wave number of K_{m} placed in infinite space with acoustic impedance of Z, one may derive the following:
In which R and T denote the reflection and transmission coefficients of the metasurface in a 2D space, respectively. Assuming a metasurface with purely real acoustic impedance (Z_{m}), the validity of the complex conjugate form of Eq. (9) is ensured.
in which the asterisks denote the complex conjugate operator. By multiplying the two sides of Eq. (8) and Eq. (10) with each other and assuming a passive, lossless metasurface (R^{2} + T^{2} = 1), the following may be derived:
In addition, by subtracting Eq. (8) from Eq. (9), it can be concluded that:
By substituting Eq. (12) into the Eq. (11), one may readily derive the following:
in which (θ) is the transmitted phase. Equation (13) demonstrates the general coupling between the transmission phase and amplitude from which the aforementioned bound shown in Eq. (7) can be inferred. Notably, this bound exists for any arbitrary, passive, lossless metasurface with real acoustic impedance, regardless of the internal structure. Please note that for ultrathin metasurfaces, cos(K_{m}L_{m}) goes to unity and the transmission amplitude will approach cos(θ), similar to its electromagnetic counterpart’s reported bound^{25}. The results obtained herein indicate that the key element for realizing full wavefront modulation is the presence of the acoustic reactance term in the metasurface acoustic impedance. For metasurfaces with complex acoustic impedance, Eq. (10) is no longer valid and may be altered to an alternate form from which a similar bound cannot be derived. Hence, in order to realize full acoustic control of the transmitted wave, we present a hornlike class of spacecoiling structures featuring a gradient in channel spacing that possess complex acoustic impedance and investigate its capacity for simultaneous phase and amplitude modulation.
Hornlike spacecoiling metamaterials
To date, spacecoiling metamaterial structures have been designed such that the zigzag channel width (d) remains constant throughout the length of the unit cell. In the previous section, we have demonstrated that this design methodology imposes a limited internal bound on acoustic transmission phase and amplitude, regardless of unit cell size or working frequency. Herein, a hornlike spacecoiling structure is presented in which the gradual change in channel width leads to the presence of an imaginary term in the acoustic impedance of the metasurface. Although the variation in channel width may be realized in many distinct forms (linear, periodic, arithmetic, geometric, etc.), this study will focus on a unique case of geometric progression of channel width, which resembles a hornlike shape. The hornlike structure presented herein (shown in Fig. 3a), instead of having a constant channel width throughout its length, features a change in width at each step governed by a constant common ratio (CR), defined as:
In which d_{ n } and d_{n−1 }are the channel width of n^{th} and n−1^{th} coil, respectively. By this definition, a structure with CR = 1 simply represents the conventional spacecoiling metamaterial structure depicted in Fig. 1a. However, for structures with CR > 1, the zigzag channel can be well approximated as an exponential horn with a flare constant of:
where N is the number of coils and L_{eff} is the effective length of the zigzag structure, which can be calculated using the aforementioned acoustic path length (see Supplementary Note 3 for details of derivation). By employing the equivalent hornlike model (shown in Fig. 3b) to investigate the behavior of the gradient spacecoiling structures, the acoustic transmission coefficient may be analytically derived using Webster’s horn equation for velocity potential^{26}:
where \(\emptyset\) is the velocity potential, m is the flare constant, and k is wave number. The solutions of Eq. (16) are in the form of:
By calculating the pressure and velocity from the velocity potential and applying the boundary conditions at the horn’s mouth and throat, the resultant transmission coefficient appears as (see Supplementary Note 3):
where d_{in} and d_{out} are the channel width at the input and output ports, respectively, a is unit cell width, k is wave number, and γ and β are defined as:
Eq. (20) represents the generalized form of the transmission coefficient for the gradient spacecoiling structure with a geometric progression. It can readily be demonstrated that in the case of the conventional spacecoiling structure in which the channel width is constant (CR = 1), the flare constant (m) will reach zero and Eq. (20) can be simplified to the form of Eq. (4). From Eq. (20), an expression relating phase and amplitude of the transmission coefficient, similar to Eq. (5), may be derived for the hornlike spacecoiling structure as follows (see Supplementary Note 3):
It can readily be demonstrated that S ≥ 1 and CR^{N/2} + CR^{−N/2} ≥ 2; therefore, the transmission amplitude will be bounded:
Based on Eq. (25), both the upper and lower bounds of the transmission amplitude are functions of the CR and the number of coils (N), and increasing these two parameters results in lowering both bounds. Thus, in order to validate Eq. (25) and the bounds on the transmission coefficient for the hornlike spacecoiling metamaterials, a limited range of the number of coils (N = 1–15) for four different values of the CR (CR = 1.1–1.4) are considered. In addition, from the TMMbased approach, the set of results for different unit cell geometries, in accordance with the aforementioned range of N for each value of CR, have been obtained and are shown in Fig. 4. For each structure with a distinct CR, the upper bound is constructed with a value of N = 1, with a tiny decrease in the upper bound as a function of CR (e.g., ≈ 0.98 for CR = 1.4). However, the lower bound is related to the highest N (N = 15, in this example analysis) and the effect of variations in CR is enhanced and the lower bound may be significantly decreased (e.g., ≈ 0.16 for CR = 1.4). Of note, there exists a tradeoff between CR and the maximum allowable range of N given the fact that channel width at the output port (d_{out}) must remain smaller than the unit cell width (a). As illustrated in Fig. 4, this class of hornlike spacecoiling structures enables marked expansion of the coverage of the phaseamplitude diagram well beyond the inherent limits encountered in conventional spacecoiling metamaterials. The expansion of the coverage of the phaseamplitude diagram yields the realization of full wavefront manipulation through simultaneous phase and amplitude modulation in gradient spacecoiling metamaterials. Please note that expanding coverage of the phaseamplitude diagram is not the only criteria requisite to realizing full wavefront modulation using the proposed structure. Of critical importance is also the fact that, due to the classical and simple shape of the hornlike spacecoiling metamaterials, the presentation of an analytical formulation is enabled, thereby easing the complexity of the design process.
Metasurfaces for complete acoustic wave modulation
Subsequent to demonstrating the capability of gradient spacecoiling metamaterials to expand the accessible transmission phaseamplitude region, metasurfaces comprising these structures have been designed, targeting two distinct functionalities: sound focusing and acoustic beam splitting. The metasurfaces thusly designed herein feature 30 hornlike space coiling unit cells of identical width (a = λ/6) and length (t = λ/2) but distinct internal structures. Although constant width and length of the unit cells is not requisite to achieving the intended functionalities, these constraints have been implemented to further demonstrate the ease of design using this class of hornlike spacecoiling metamaterials. Please note that the unit cell’s width has a critical role in conversion efficiency, with smaller widths being preferable for optimal performance (see Supplementary Note 4 for detailed discussion). The internal structure of each unit cell (N, w, d_{in}, and CR) has been designed to generate the desired phase and amplitude in order to shape the transmitted acoustic wavefront. The first step undertaken herein in designing the metasurfaces was to derive the required phase and amplitude of the transmitted wave from each unit cell of a particular metasurface. To this end, the concept of timereversal or the phaseconjugation method in the frequency domain have been utilized, given the capability for simultaneous phase and amplitude modulation. Implementing the aforementioned approaches in designing the metasurface allows for a drastic reduction in the computational expense when compared with phasebased metasurfaces in which rigorous optimization is required. The desired transmission amplitudephase profile of the metasurface with regards to a given functionality may be obtained from both numerical and analytical approaches. Herein, numerical techniques have been utilized for this step, as this approach may readily be generalized for any complicated profile, such as 3D acoustic holograms. Following the derivation of the requisite phase and amplitude of transmission at each unit cell, the internal geometry of the metasurface’s unit cell has been designed analytically using the TMM approach and, ultimately, the entire metasurface in both lossy and lossless conditions has been simulated to visualize the targeted performance.
In the case of focusing of the acoustic wave shown in Fig. 5a, the metasurface has been designed to focus the sound at a focal point located two wavelengths from the metasurface. In order to determine the proper wavefront, a hypothetical monopole point source has been considered on the desired focusing spot and the resultant complex conjugate pressure has been calculated over the transmission side of the metasurface (righthandside). Next, given the plane wave incident on the lefthandside of the metasurface, the desired transmission coefficient for each unit cell is computed and the unit cell structures have been designed accordingly. With regards to the acoustic beam splitting shown in Fig. 5b, two plane waves with angles of π/12 and – π/12 have been assumed on the transmission side of the metasurface and the desired transmission coefficients at each unit cell have been calculated. The details of the unit cell geometry, along with the resultant transmission coefficient have been detailed in Supplementary Table 1.
The sound focusing results are shown in Fig. 5a in which the transmitted wave has been focused at the desired focal spot. As a common aim in focusing applications is the confinement of the acoustic wave power, the squared pressure (p^{2}) in Fig. 5a, c is depicted and corresponds to the resultant power. By employing the hornlike spacecoiling design, a high degree of focusing has been obtained and the resultant focal region demonstrates a distinguishable high power region on the transmission side. In order to quantify the resultant focusing, p^{2} is probed along the cutline (shown in Fig. 5a) and is depicted in Fig. 5c. Notably, the pressure at the focal point is ~ 2.5 times the incident pressure, yielding a power confinement on the order of 6. Moreover, the pressure profile depicted in Fig. 5c successfully mimics the form of the Hankel function as the monopole source and a pressure power ratio of ~ 8 (6.3 peak at focal region and 0.8 at nearest peak to focal region) have been obtained. Finally, the acoustic beam splitting results are shown in Fig. 5b in which the normally incident plane wave on the metasurface has been divided into the two equiamplitde beams in the desired directions. In order to quantify the results, an absolute pressure profile normalized by the incident beam’s amplitude has been probed along the cutline and depicted in Fig. 5d. It can be observed that the split beams maintain an amplitude of ~ 65% of the incident beam and an amplitude resolution of ~ 3 (0.65 in the beam regions and 0.2 in the region between the 2 beams) may be achieved with the designed metasurface.
In order to experimentally validate the proposed design methodology, a metasurface featuring the hornlike space coiling metamaterial design has been fabricated and tested. To this end, for the sake of simplicity, the reverse form of the sound focusing case has been experimentally validated in order to avoid the complexity associated with the practical generation of a plane wave in the nearfield regime. Given the timereversible nature of the proposed structure, if the point source is placed at a distance of two wavelengths from the metasurface, an identical metasurface to that having been designed for sound focusing may be employed to convert a cylindrical wave to a plane wave. Figure 6a demonstrates the simulated resultant pressure profile in which the cylindrical wavefront originating from the monopole source has been reformed to yield a laterally confined plane waveform on the transmission side of the metasurface. In order to visualize the experimental wave pattern, the resultant pressures on the transmission side of the metasurface (shown in Fig. 6a) have been measured both with and without the presence of the metasurface (results shown in Fig. 6b, c). In Fig. 6b, the normalized pressure in the absence of the metasurface is shown in which the acoustic wavefront represents a diverging cylindrical waveform. Please note that although the experimental domain is bounded with absorbing foam to mitigate reflection, the impedance mismatch at the domain boundary resulted in minor and localized deviation of the pressure from the ideal form. Figure 6c demonstrates the resultant pressure field on the transmission side of the fabricated metasurface. The experimentally derived and normalized pressure field in the presence of the metasurface clearly demonstrates a laterally confined plane wavefront, which is in a good agreement with the pattern expected from the numerical solution, shown in Fig. 6a.
Acoustic wave focusing, cylindricaltoplane wave conversion, and beam splitting represent simple examples of acoustic wavefront manipulation analyzed herein in order to demonstrate the capability of gradient spacecoiling metamaterials. Beyond acoustic wavefront manipulation, including the realization of more complicated acoustic patterns, metasurfaces may also be employed to mitigate the effects of aberrant layers by aberration correction. In all these cases, the precise design of the metasurface is simplified by the capacity for modulating both phase and amplitude. Moreover, the added degree of freedom to modulate amplitude, in addition to phase, offers opportunities for performance that surpasses the capabilities of phasebased approaches (see Supplementary Note 4 for additional details).
Discussion
The work presented herein, founded on the basis of a wellknown acoustic metamaterial structure, namely spacecoiling metamaterials, introduces a class of hornlike spacecoiling metamaterials, which provides sufficient degrees of freedom for full acoustic wave control. Initially, the limitations of conventional spacecoiling metamaterials for simultaneous phase and amplitude modulation are investigated, demonstrating that transmission through conventional spacecoiling structures possesses topologicallike bound, which is not frequency or unit cell dimension dependent. Moreover, we have demonstrated that this bound applies to any passive, lossless metasurface with real acoustic impedance and highlighted the importance of the reactance term for full wavefront modulation. Next, hornlike spacecoiling structure capable of phaseamplitude modulation beyond conventional spacecoiling structure limits is proposed and analyzed. Finally, metasurfaces featuring the proposed structures have been designed and simulated with the aims of sound focusing and acoustic beam splitting, whereas cylindrical to plane wave conversion has been experimentally validated. Hornlike spacecoiling metamaterials offer a new methodology in metasurface design, in which phase and amplitude of the transmitted wave can simultaneously be modulated and tuned, yielding the capacity for complete wavefront shaping for myriad applications.
Methods
Experimental setup and procedure
The acoustic metasurface with the dimensions detailed in Supplementary Table 1 (Focusing Metasurface) was fabricated with a commercial 3D printer (Dimension SST 1200es) from AcrylonitrileButadieneStyrene plastic with a resolution of 0.2 mm. The experimental setup is shown in Fig. 7 and is composed of two thick plywood sheets of dimensions 250 cm × 250 cm × 2.5 cm placed in parallel with a spacing of 2 cm to create a 2D domain. Domain boundaries were confined with an absorbing foam 5 cm in thickness to mitigate the back reflection with an optimal performance at 1 KHz. In order to realize an acoustic point source within this domain, a loudspeaker was coupled to a narrow tube outlet to generate a localized point source. In order to ultimately map the acoustic field, a measurement region defined with appropriate offset from boundaries (~ 40 cm) was meshed with 190 equally spaced probing points with centertocenter spacing of 9 cm. The experimental procedure was designed to be performed at a frequency of 1 KHz and associated dimensions and spacing have been realized accordingly. To map the field within the measurement region, two initially calibrated microphones (Audix TM1) have been used in which one microphone is fixed throughout the entire mapping procedure and the second microphone moved to sample all probing points. At each probing location, the complex transfer function between the two microphone signals was calculated and averaged over 10 readouts (experimental data for both cases have been detailed in Supplementary Table 2). Finally, spline interpolation was utilized to visualize the resultant acoustic field in finer mesh.
Numerical simulations
All simulations were performed with finite element solver COMSOL Multiphysics using the pressureacoustic module in the frequencydomain. In the lossy model simulations, the narrow region acoustic module has been used, which incorporates the effect of thermal and viscous losses. For obtaining the resulting transmission coefficient from each hornlike unit cell, the 2D waveguide model, similar to the impedance tube, has been utilized and the transmission coefficients have been calculated using the microphone transfer function method^{27}. The waveguide and all unit cells are considered perfectly rigid medium and the perfectly matched layer has been implemented to enclose the computational domain to mitigate the subsequent reflections.
Data availability
The authors declare that all data supporting the results of the study are available within the published article and its Supplementary Information section.
References
Liu, L. et al. Broadband metasurfaces with simultaneous control of phase and amplitude. Adv. Mater. 26, 5031–5036 (2014).
Zhao, Y. & Alù, A. Manipulating light polarization with ultrathin plasmonic metasurfaces. Phys. Rev. B. 84, 205428 (2011).
Ni, X., Kildishev, A. V. & Shalaev, V. M. Metasurface holograms visible light. Nat. Commun. 4, 2807 (2013).
Estakhri, N. M. SpringerAmpamp; Alù, A. Wavefront transformation with gradient metasurfaces. Phys. Rev. X 6, 041008 (2016).
Song, Y. S., Huang, B., Dong, H. Y., Cheng, Q. & Cui, T. J. Broadband focusing acoustic lens based on fractal metamaterials. Sci. Rep. 6, 35929 (2016).
Zhao, J., Li, B., Chen, Z. & Qiu, C. W. Manipulating acoustic wavefront by inhomogeneous impedance and steerable extraordinary reflection. Sci. Rep. 3, 2537 (2013).
Mei, J. & Wu, Y. Controllable transmission and total reflection through an impedancematched acoustic metasurface. New J. Phys. 16, 123007 (2014).
Xie, Y. et al. Wavefront modulation and subwavelength diffractive acoustics with an acoustic metasurface. Nat. Commun. 5, 5553 (2014).
Tang, K. et al. Anomalous refraction of airborne sound through ultrathin metasurfaces. Sci. Rep. 4, 6517 (2014).
Li, Y. et al. Experimental realization of full control of reflected waves with subwavelength acoustic metasurfaces. Phys. Rev. Appl. 2, 064002 (2014).
Li, Y., Jiang, X., Liang, B., Cheng, J. C. & Zhang, L. Metascreenbased acoustic passive phased array. Phys. Rev. Appl. 4, 024003 (2015).
Li, Y., Liang, B., Gu, Z. M., Zou, X. Y. & Cheng, J. C. Reflected wavefront manipulation based on ultrathin planar acoustic metasurfaces. Sci. Rep. 3, 2546 (2013).
Li, Y. et al. Acoustic focusing by coiling up space. Appl. Phys. Lett. 101, 233508 (2012).
Sun, H. T., Wang, J. S., Cheng, Y., Wei, Q. & Liu, X. J. Modulation of water surface waves with a coilingupspace metasurface. AIP Adv. 6, 055017 (2016).
Yuan, B., Cheng, Y. & Liu, X. Conversion of sound radiation pattern via gradient acoustic metasurface with spacecoiling structure. Appl. Phys. Express 8, 027301 (2015).
Li, Y. et al. Threedimensional ultrathin planar lenses by acoustic metamaterials. Sci. Rep. 4, 6830 (2014).
Li, Y., Liang, B., Gu, Z. M., Zho, X. Y. & Cheng, J. C. Unidirectional acoustic transmission through a prism with nearzero refractive index. Appl. Phys. Lett. 103, 053505 (2013).
Li, Y., Liang, B., Zho, X. Y. & Cheng, J. C. Extraordinary acoustic transmission through ultrathin acoustic metamaterials by coiling up space. Appl. Phys. Lett. 103, 063509 (2013).
Wang, Q. et al. Broadband metasurface holograms: toward complete phase and amplitude engineering. Sci. Rep. 6, 32867 (2016).
Scheuer, J. Metasurfacesbased holography and beam shaping: engineering the phase profile of light. Nanophotonics 6, 137–152 (2016).
Liang, Z. & Li, J. Extreme acoustic metamaterial by coiling up space. Phys. Rev. Lett. 108, 114301 (2012).
Liang, Z. et al. Spacecoiling metamaterials with double negativity and conical dispersion. Sci. Rep. 3, 1614 (2013).
Xie, Y., Popa, B. I., Zigoneanu, L. & Cummer, S. A. Measurement of a broadband negative index with spacecoiling acoustic metamaterials. Phys. Rev. Lett. 110, 175501 (2013).
Frenzel, T. et al. Threedimensional labyrinthine acoustic metamaterials. Appl. Phys. Lett. 103, 061907 (2013).
Monticone, F., Estakhri, N. M. & Alù, A. Full control of nanoscale optical transmission with a composite metascreen. Phys. Rev. Lett. 110, 203903 (2013).
Crandall, I. B Theory of Vibrating Systems and Sound. pp. 158163(D. Van Nostrand Company, New York. 1954).
Ho, K. M., Yang, Z., Zhang, X. X. & Sheng, P. Measurements of sound transmission through panels of locally resonant materials between impedance tubes. Appl. Acoust. 66, 751–765 (2005).
Acknowledgements
We thank Boston University Materials Innovation Grant and Dean’s Catalyst Award. We also thank the Boston University Photonics Center for technical support.
Author information
Authors and Affiliations
Contributions
R.G., S.A., and X.Z. conceived the idea and interpreted the results. R.G. designed and performed the theoretical and numerical calculations. J.N. helped with the numerical simulations. R.G. and J.N. under guidance of R.G.H. designed and performed the experiment. R.G., S.A. and X.Z. contributed to the preparation and writing of the manuscript, and X.Z. planned, coordinated, and supervised the project.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Ghaffarivardavagh, R., Nikolajczyk, J., Glynn Holt, R. et al. Hornlike spacecoiling metamaterials toward simultaneous phase and amplitude modulation. Nat Commun 9, 1349 (2018). https://doi.org/10.1038/s4146701803839z
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s4146701803839z
This article is cited by

Acoustic transmissive cloaking with adjustable capacity to the incident direction
Microsystems & Nanoengineering (2022)

Bilayer ventilated labyrinthine metasurfaces with high sound absorption and tunable bandwidth
Scientific Reports (2021)

Design approach of perforated labyrinthbased acoustic metasurface for selective acoustic levitation manipulation
Scientific Reports (2021)

Gradient folding metasurfaces with simultaneous phase and amplitude modulation
Journal of Mechanical Science and Technology (2021)

Implementing fractional Fourier transform using SH0 wave computational metamaterials in space domain
Science China Technological Sciences (2021)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.