The preprophase band-associated kinesin-14 OsKCH2 is a processive minus-end-directed microtubule motor

In animals and fungi, cytoplasmic dynein is a processive minus-end-directed motor that plays dominant roles in various intracellular processes. In contrast, land plants lack cytoplasmic dynein but contain many minus-end-directed kinesin-14s. No plant kinesin-14 is known to produce processive motility as a homodimer. OsKCH2 is a plant-specific kinesin-14 with an N-terminal actin-binding domain and a central motor domain flanked by two predicted coiled-coils (CC1 and CC2). Here, we show that OsKCH2 specifically decorates preprophase band microtubules in vivo and transports actin filaments along microtubules in vitro. Importantly, OsKCH2 exhibits processive minus-end-directed motility on single microtubules as individual homodimers. We find that CC1, but not CC2, forms the coiled-coil to enable OsKCH2 dimerization. Instead, our results reveal that removing CC2 renders OsKCH2 a nonprocessive motor. Collectively, these results show that land plants have evolved unconventional kinesin-14 homodimers with inherent minus-end-directed processivity that may function to compensate for the loss of cytoplasmic dynein.

K inesin and cytoplasmic dynein are both microtubule-based motor proteins that convert chemical energy from ATP hydrolysis into mechanical work for a variety of essential cellular processes [1][2][3] . Inherently processive microtubule-based motors are ones that are able to move continuously for several micrometers on single microtubules before dissociation without having to form multi-motor ensembles. Such motors are more likely to accomplish the same microtubule-based tasks with fewer motors 4 . Cytoplasmic dynein is the primary motor protein for cellular processes that depend on microtubule-based minus-enddirected motility in animal and fungal cells, which is usually attributed to its remarkable ability to generate processive minusend-directed motility without clustering. In contrast, kinesin-14s are commonly nonprocessive minus-end-directed motor proteins [5][6][7][8][9][10][11][12][13][14][15][16] . Among all kinesin-14s studied to date, Kar3 from Saccharomyces cerevisiae and KlpA from Aspergillus nidulans are the only two known to have intrinsic processivity: Kar3 achieves processive motility toward the microtubule minus end by forming a heterodimer with the non-motor proteins Cik1 or Vik1 17,18 , and KlpA exhibits processive motility toward the microtubule plus end as a single homodimer 19 .
Unlike animals and fungi, land plants have no cytoplasmic dynein in their motor protein repertoire but contain instead a large number of kinesin-14s 20 . For example, there are 21 kinesin-14s in Arabidopsis thaliana 21 , 18 in Oryza sativa 22 , and 15 in Physcomitrella moss 23 . Kinesins with a calponin homology domain (KCHs) are a distinct subset of kinesin-14s found exclusively in land plant cells 24 ; there are at least 7 KCH proteins in A. thaliana 21 , 9 in O. sativa 22 , and 4 in P. moss 23 . KCH proteins likely function to mediate the crosstalk between the microtubule and actin networks inside plant cells, as the CH domain is often found in proteins that interact with the actin filaments (AFs) 25,26 . Consistent with this notion, a number of KCHs have been shown to bind to microtubules and AFs simultaneously [27][28][29][30][31][32] . While it has long been speculated that land plants might have evolved unconventional kinesin-14s with intrinsic minus-end-directed processivity to compensate for the loss of cytoplasmic dynein 20,33 , no plant kinesin-14 has yet been found that exhibits processive minusend-directed motility on single microtubules as individual homodimers 15,34 .
In this study, we report our systematic characterization of OsKCH2, a KCH protein from O. sativa that contains an Nterminal CH domain and a central microtubule-binding motor domain flanked by two predicted coiled-coils (CC1 and CC2). We find that OsKCH2 localizes to the microtubule bundles in the preprophase band at the prophase in vivo. Using total internal reflection fluorescence (TIRF) microscopy, we further show that purified OsKCH2 clusters to transport AFs along microtubules with minus-end-directed motility in vitro. Importantly, our single-molecule TIRF microscopy experiments reveal that unlike all other kinesin-14s that have been studied to date, OsKCH2 is a novel kinesin-14 motor that is capable of producing processive minus-end-directed motility on single microtubules as a homodimer. While only CC1 is necessary and sufficient to enable OsKCH2 dimerization, CC2 plays an indispensable role in OsKCH2 processivity and apparently enhances its binding to microtubules in vitro. Interestingly, CC2 substitution with that from the processive OsKCH2 is sufficient to enable OsKCH1-a nonprocessive homolog of OsKCH2-for processive minus-end-directed motility on single microtubules as a homodimer. Collectively, our results not only show that land plants have evolved unconventional kinesin-14 motors with intrinsic minus-end-directed processivity, but also markedly advance current knowledge of the design principles of kinesin-14s.
We performed the phylogenetic analysis of all kinesin-14s from A. thaliana and O. sativa (Supplementary Fig. 2 and Supplementary Data 1), which showed that OsKCH2 is more closely related to AtKP1, a KCH protein that was previously found to localize to mitochondria in A. thaliana 35 . We thus wanted to determine the intracellular localization of OsKCH2. To do that, we first generated an antibody against OsKCH2 for immunofluorescence, which revealed punctate signals at the cell cortex in a belt surrounding the prophase nucleus ( Supplementary Fig. 3a). This signal was specific to OsKCH2, as no signal was detected in the TOS17 kch2 mutant cells ( Supplementary Fig. 3b). This localization pattern resembled the preprophase band (PPB) 36,37 , a plant-specific ring-shaped cortical structure that contains mainly microtubules and AFs and plays an essential role in division plane establishment 38,39 . We next performed immunolocalization experiments to reveal the spatial relationship between OsKCH2 and the PPB microtubules. The results showed that the punctate OsKCH2 signal distributed along the PPB microtubules at prophase that could be viewed from different angles (Fig. 1b). No noticeable OsKCH2 signal was detected along microtubules of other arrays during mitosis, such as the spindles. We conclude that OsKCH2 localizes to the PPB microtubule array in a cell cycle-dependent manner.
It was shown recently that OsKCH1 molecules collectively transport AFs on the microtubules in the presence of ATP 16 . Given that the PPB also contains AFs, we next wanted to determine whether purified OsKCH2 was sufficient to transport AFs on the microtubule. To do that, we purified OsKCH2(1-767) -a truncated OsKCH2 that lacked the C terminus-for an in vitro actin transport assay (Fig. 1a, c, d). The assay showed that OsKCH2(1-767) transported AFs on single microtubules toward the minus ends ( Fig. 1e and Supplementary Movie 1). Like OsKCH1 16 , OsKCH2 also transported AFs with two distinct velocities (V slow and V fast , Fig. 1f), which were determined to be V slow = 12 ± 6 nm s −1 and V fast = 32 ± 7 nm s −1 (mean ± s.d., n = 231, Fig. 1g). Collectively, these results suggest that OsKCH2 is an authentic KCH protein that is capable of interacting simultaneously with AFs and microtubules.
Recent studies have shown that as few as two nonprocessive kinesin-14 molecules could couple to achieve minus-end-directed processive motility on single microtubules 15,40 . To rule out that GFP-OsKCH2(289-767) achieved processive minus-end-directed motility by inadvertently forming high-order oligomers, we conducted several additional experiments. First, we performed single-molecule photobleaching and sucrose gradient centrifugation assays to determine the oligomerization of GFP-OsKCH2 (289-767). The photobleaching assay showed that GFP-OsKCH2 (289-767) existed primarily as a homodimer in solution, as it was photobleached in a pattern similar to other dimeric kinesins 15 and predominantly with a single step or two steps (Fig. 3a, b), Consistent with the photobleaching assay, the sucrose gradient assay showed that GFP-OsKCH2(289-767) migrated with a mean sedimentation coefficient of 8.26 S (Fig. 3c), which yielded a molecular weight (MW =~178 kDa) approximately twice that of a monomeric GFP-OsKCH2(289-767) (MW = 82.1 kDa).
Second, we modified GFP-OsKCH2(289-767) to generate GFP-OsKCH2(289-767) T , which contains an insertion of the coding sequence for a GCN4 parallel tetramer motif 41 between GFP and OsKCH2 ( Supplementary Fig. 4a). In a recent study 15  . c SDS-PAGE analysis of fractions from the sucrose gradient centrifugation assays of GFP-OsKCH2(289-767) (top) and the standard proteins (bottom). For each protein, the band intensity distribution was fit to a Gaussian function to determine the peak fraction. Red arrowhead corresponds to the estimated peak fraction position of GFP-OsKCH2(289-767); and purple arrowheads correspond to the estimated peak fraction positions of the standard proteins as indicated. The molecular weight of GFP-OsKCH2(289-767) was estimated to be 177.9 ± 3.8 kDa (mean ± s.d., n = 3). d Schematic diagrams of the full-length OsKCH2, GFP-OsKCH2(368-767), and GFP-OsKCH2(289-720). e SDS-PAGE analysis of fractions from the sucrose gradient centrifugation assays of GFP-OsKCH2 (368-767) (top) and GFP-OsKCH2(289-720) (bottom). Red arrowheads correspond to the peak fraction positions of GFP-OsKCH2(368-767) and GFP-OsKCH2(289-720); and purple arrowheads correspond to the peak fraction positions of the standard proteins as indicated. For each protein, the peak fraction was estimated by fitting the band intensity distribution to a Gaussian function. The molecular weights of GFP-OsKCH2(368-767) and GFP-OsKCH2(289-720) were determined to be 60.9 ± 7.9 kDa and 155.7 ± 8.   ARTICLE directed processive motility for GFP-OsKCH2(289-767) is not due to inadvertent motor coupling and/or clustering, but rather is an intrinsic behavior of the motor as a homodimer.
Several kinesins are known to achieve processive motility on single microtubules via non-motor microtubule-binding domains 17,19,43 . Given that CC2 in OsKCH2 contains quite a number of positively charged residues ( Supplementary Fig. 6), we wanted to determine whether CC2 contains the ability to independently bind to microtubules. To do that, we created a fusion protein GST-OsKCH2(721-767) containing the majority of the CC2 region for an in vitro microtubule co-sedimentation assay (Fig. 4c). The assay showed that purified CC2 only weakly interacted with the microtubule in both high and low ionic strength buffer conditions (Fig. 4d, e). However, when we performed a microtubule co-sedimentation assay to compare the microtubule binding of GFP-OsKCH2(289-767) and GFP-OsKCH2(289-720), we found that GFP-OsKCH2(289-767) bound to the microtubule much more strongly than GFP-OsKCH2(289-720) (Fig. 4f, g). Based on these observations, we additionally engineered a quadruple mutant of the processive GFP-OsKCH2(289-767) to replace the last four positively charged residues to the neutral alanine (GFP-K760A/R761A/ R764A/R766A, Supplementary Fig. 7a). We found that the quadruple mutant retained the ability to collectively glide microtubules with minus-end-directed motility ( Supplementary  Fig. 7b and Supplementary Movie 10), but lacked the ability to move processively on single microtubules ( Supplementary Fig. 7c and Supplementary Movie 11) and displayed significantly reduced microtubule-binding affinity (Supplementary Fig. 7d) compared to the processive GFP-OsKCH2(289-767) (Fig. 4f). Collectively, these results show that CC2 enables OsKCH2 (289-767) for processive motility on the microtubule likely by enhancing its microtubule-binding affinity via those positively charged residues.

Discussion
To summarize, we have revealed an unexpected finding that OsKCH2(289-767), a motor-neck construct of the kinesin-14 OsKCH2 from the rice plant O. sativa, is a novel processive minus-end-directed microtubule motor. To our knowledge, OsKCH2(289-767) is the first homodimeric kinesin-14 to demonstrate processive minus-end-directed motility on single microtubules without clustering. This finding markedly expands our knowledge of the diversified design principles of kinesin-14s. Importantly, this study shows that some land plants, if not all, have evolved unconventional kinesin-14s with intrinsic minusend-directed processive motility, which could potentially function to compensate for the lack of cytoplasmic dynein 20,33 .
We have further shown that the putative coiled-coil region CC2 (aa 718-766) does not form an authentic coiled-coil to contribute to the dimerization of GFP-OsKCH2(289-767). Instead, our results show that CC2 apparently plays an indispensable role in its processive motility on single microtubules, as GFP-OsKCH2(289-720)-a truncation construct that lacks CC2 -still forms a dimer (Fig. 3e) but fails to exhibit processive motility on the microtubule (Fig. 4b). How does CC2 function to contribute to the processivity motility of OsKCH2? One possibility is that CC2 functions as an ATP-independent microtubulebinding site. In this case, while the motor domain and CC2 of OsKCH2 individually exhibit weak binding to microtubules (Fig. 4d, g), they are able to synergistically achieve tighter microtubule binding in GFP-OsKCH2(289-767) to promote processivity. Alternatively, CC2 does not act as an ATPindependent microtubule-binding domain, but instead interacts with the motor domain of GFP-OsKCH2(289-767) to enhance its interaction with the microtubule. This would be similar to how the microtubule binding of the Arabidopsis kinesin-14 AtKCBP is affected by the neck mimic outside its motor domain 44,45 . Given that mutating the last four positively charged residues (K760, R761, R764, and R766) in CC2 altogether to alanine renders GFP-OsKCH2(289-767) a nonprocessive motor on single microtubules and that replacing CC2 in the nonprocessive GFP-OsKCH1(292-744) with that from OsKCH2 results in a processive GFP-OsKCH1/KCH2 (Fig. 5), we are in favor of the former notion that CC2 enables GFP-OsKCH2(289-767) for processive motility by acting as an ATP-independent microtubule-binding site. Future high-resolution cryo-EM structures of OsKCH2 constructs on single microtubules are needed to clarify the precise underlying biophysical mechanism of CC2-enabled processivity.
What are the implications of the processive motility of GFP-OsKCH2(289-767)? The PPB plays a critical role in cell division plane determination in flowering plants, although the exact mechanism is still unclear 39 . AFs are associated with the PPB microtubule bundles at prophase when plant cells undergo mitosis [46][47][48] , but disappear prior to the disassembly of the PPB 49 . The transient presence of AFs at the PPB suggests that AF dynamics is regulated during the assembly and disassembly of the PPB. In this study, we show that OsKCH2 decorates the PPB microtubules at prophase in vivo (Fig. 1b) and clusters to transport AFs on the microtubules with minus-end-directed motility in vitro ( Fig. 1e and Supplementary Movie 1). These results suggest that one likely function of OsKCH2 is to recruit AFs to the PPB by either dynamically translocating AFs on the PPB microtubules or statically crosslinking these two cytoskeletal filaments inside the PPB. In addition, OsKCH2 may function in vivo to control nuclear positioning in a way analogous to how cytoplasmic dynein moves the spindle and nucleus in budding yeast 50 : for example, to position the nucleus inside the cell, OsKCH2 becomes cortically anchored to the actin network via a mechanism involving the CH domain, captures the plus ends of cytoplasmic microtubules (that are attached to the nucleus via the minus ends), and uses its minus-end-directed motility to pull these cytoplasmic microtubules along the cortex. The ability of OsKCH2 to generate processive motility without clustering implies that OsKCH2 can keep a tight grip on the microtubule filament when carrying out its cellular function(s) and thus is able to achieve the same cellular task(s) with fewer motors. Systematic in vivo studies of the wild-type OsKCH2 and its processivitydeficient mutants will be important next steps toward revealing its cellular functions, the physiological role of the CC2 region, and the biological relevance of its processivity. Given that among all kinesin-14 motors from A. thaliana and O. sativa, OsKCH2 is more related to the A. thaliana KCH protein AtKP1, it would be interesting to investigate whether AtKP1 retained inherent minus-end-directed processive microtubule-based motility during the speciation process.

Methods
Molecular cloning of recombinant KCH constructs. The full-length cDNAs of OsKCH1 and OsKCH2 were both codon optimized and synthesized for protein expression and purification from E. coli. All KCH constructs were integrated in a modified pET17b vector via isothermal assembly and verified by DNA sequencing.
Protein expression and purification. For protein expression, plasmids were transformed into the BL21 Rosetta (DE3) competent cells (Novagen). Cells were grown at 37°C in TPM (containing 20 g tryptone, 15 g yeast extract, 8 g NaCl, 2 g Na 2 HPO 4 , and 1 g KH 2 PO 4 per 1 l) supplemented with 50 µg ml −1 ampicillin and 30 µg ml −1 chloramphenicol. Expression was induced by cold shock on ice at OD = 0.8-1 with 0.1 mM IPTG, and incubation was continued for additional 12-14 h at 20°C. Cell pellets were harvested by centrifugation at 5500 × g for 10 min using a S-5.1 rotor (Beckman Coulter), and stored at −80°C prior to cell lysis.
Production of anti-OsKCH2 antibodies and immunofluorescence. The cDNA fragment encoding the OsKCH2 polypeptide of amino acids 171-313 was amplified using the primers of 5′-AAG ACC ATG GCT TCA TAT TCA TCC AGG G-3′ and 5′-AAG TGA GCT CCC ATC ATC CAA TTG TTT G-3′. The resulting fragment was digested with the enzymes NcoI and SacI and cloned into the pGEX-KG vector 51 at the identical sites. A GST fusion protein was then expressed in bacteria after the recombinant plasmid was introduced into the bacterial strain BL21(DE3) and purified by affinity chromatography using reduced glutathione resin (ThermoFisher Scientific, Catalog #25236). The purified fusion protein was used as an antigen for immunization in rabbits at the Comparative Pathology Laboratory, University of California in Davis, where the antibody production protocol was approved by the UC Davis Institutional Animal Care and Use Committee (IACUC). OsKCH2 antibodies were purified using columns of GST and GST-OsKCH2(171-313) proteins, which had been, respectively, immobilized on AminoLink TM Plus coupling resins (ThermoFisher Scientific, Catalog #20505) according to the manufacturer's instruction. Anti-GST antibodies were first depleted from the antisera by the GST column. The flow through was then applied to the GST-OsKCH2(171-313) column. Specific antibodies against OsKCH2 were eluted from the GST-OsKCH2(171-313) column with 100 mM glycine (pH 2.5) and immediately neutralized with 1/10 volume of 1 M Tris-HCl (pH 8.0) 52 .
Preparation of fluorescent actin filaments. The actin stock solution (10 mg ml −1 ) was reconstituted in the general actin buffer (GAB, 5 mM Tris-HCl, pH 8, 0.2 mM CaCl 2 , 1 mM DTT, and 0.2 mM ATP) from the lyophilized actin (Cytoskeleton). For making actin filaments, 2 µl of the actin stock was further diluted in the general actin buffer to a final concentration of 1 mg ml −1 and kept on ice for 1 h to depolymerize all filaments. After 1-h incubation on ice, 2 µl of 10× polymerization buffer (100 mM Tris-HCl, pH 7.5, 500 mM KCl, 20 mM MgCl 2 , 10 mM ATP) was added to the 20 µl actin solution and kept at room temperature to polymerize actin filaments. The polymerized actin filament was then diluted in 1× polymerization buffer supplemented with 70 nM rhodamine-phalloidin (Invitrogen) to label the actin filaments.
TIRF microscopy experiments. All time-lapse imaging assays were performed at room temperature using the Axio Observer Z1 objective-type TIRF microscope (Zeiss) equipped with a ×100 1.46 NA oil-immersion objective and a back-thinned electron multiplier CCD camera (Photometrics). All microscope coverslips were functionalized with biotin-PEG as previously described to reduce nonspecific surface absorption of molecules 55 . All time-lapse imaging experiments in this study used flow chambers that were made by attaching a functionalized coverslip to a microscope glass slide by double-sided tape as previously described 56 .
For the actin transport assay, the flow chamber was incubated with one chamber volume of 0.5 mg ml −1 of streptavidin for 2 min at room temperature, washed with two chamber volumes of BRB15 (15 mM PIPES, pH 6.8, 1 mM MgCl 2 , and 1 mM EGTA) supplemented with 20 µM taxol to remove excessive unbound streptavidin, and incubated with one chamber volume of taxol-stabilized polaritymarked Alexa 488/Biotin-labeled microtubules at room temperature for 5 min. Unbound microtubules were removed by washing the chamber with five chamber volumes of BRB80 supplemented with 20 µM taxol and 1.3 mg ml −1 casein. The flow chamber was next perfused with OsKCH2(1-767) diluted in BRB80 (80 mM PIPES, pH 6.8, 1 mM EGTA, and 1 mM MgCl 2 ) supplemented with 20 µM taxol, and 1.3 mg ml −1 casein, incubated at room temperature for 2 min, and washed with five chamber volumes of the same BRB80-based buffer to remove unbound OsKCH2(1-767) motors. The chamber was then perfused with rhodamine-labeled actin filaments, incubated at room temperature for 2 min, and washed with the same BRB80-based buffer to remove unbound actin filaments. Finally, the flow chamber was perfused with a BRB80-based motility buffer supplemented with 1 mM ATP, 25 mM KCl, 25 μM taxol, 1.3 mg ml −1 casein, and an oxygen scavenger system 57 . Time-lapse images were acquired at 1 frame per 5 s for 3 min.
For microtubule gliding assay, the chamber was perfused with anti-His antibody diluted in BRB80 and incubated for 2 min at room temperature. After washing away unbound antibody, one chamber of motor properly diluted in BRB80 supplemented with 20 µM taxol and 1.3 mg ml −1 casein was added to the chamber. After 2 min incubation at room temperature, unbound motors were washed away with BRB80 supplemented with 20 µM taxol and 1.3 mg ml −1 casein. Polarity-marked TMR microtubule diluted in BRB80 supplemented with 20 µM taxol and 1.3 mg ml −1 casein was then added to the chamber. After 2-min incubation, unbound microtubules were removed by washing the chamber with two chamber volumes of BRB80 supplemented with 20 µM taxol and 1.3 mg ml −1 casein. Finally, the flow chamber was perfused with one chamber volume of BRB80-based motility buffer containing 1 mM ATP, 25 mM KCl, 25 μM taxol, 1.3 mg ml −1 casein, and an oxygen scavenger system. Time-lapse images were taken at 1 frame per 5 s for 5 min.
For the single-molecule motility assays, taxol-stabilized polarity-marked HiLyte 647/Biotin-labeled microtubules were first immobilized using the same procedure as described above in the actin transport assay. After removing unbound microtubules by washing the chamber with five chamber volumes of BRB15 supplemented with 20 µM taxol and 1.3 mg ml −1 casein, the chamber was perfused with a BRB80-based motility mixture containing diluted KCH motors, 1 mM ATP, 25 mM KCl, 25 μM taxol, 1.3 mg ml −1 casein, and an oxygen scavenger system as previously described 57 . Time-lapse image sequences of the processive GFP-OsKCH2(289-767) were recorded at 1 frame per 2 s with an exposure time of 200 ms for 10 min. Kymographs were generated and analyzed in ImageJ (NIH) for extracting the velocity and run-length information of individual KCH motors. Only those kymograph lines containing at least 4 pixels on both the X-and Y-axes in the kymographs were included in the analysis. Time-lapse image sequences of the nonprocessive GFP-OsKCH2(289-720), GFP-OsKCH1(292-744), and GFP-K760A/R761A/R764A/R766A were recorded continuously with an exposure time of 200 ms for 1 min.
For the single-molecule photobleaching assays, experiments were performed in the single-molecule motility buffer without ATP to keep the kinesin molecules tightly bound to surface-immobilized microtubules. Time-lapse image sequences were continuously recorded with an exposure time of 100 ms until the field of view was completely bleached of fluorescence signal. The number of photobleaching steps of individual kinesin motors was obtained by measuring the fluorescence intensity in ImageJ.
Sucrose gradient centrifugation. To determine the oligomer status of a KCH motor, 50-100 µl of purified protein was loaded on the top of a 5-20% sucrose gradient prepared in BRB80 supplemented with 25 mM KCl as previously described 58 . The gradient was centrifuged at 150,000 × g at 4°C for 18 h in the Beckman SW40 rotor. Fractions (~450 µl) were collected from the top and analyzed by the standard SDS-PAGE. The peak fraction was determined by fitting the protein band intensities to a Gaussian distribution. The sedimentation value was determined using the following standards: carbonic anhydrase (CA), MW = 29 kDa, 2. Microtubule co-sedimentation assays. Microtubule co-sedimentation assays were performed as previously described 59 . Briefly, taxol-stabilized microtubules were polymerized from unlabeled tubulin (200 μM) using the aforementioned protocol. Purified KCH constructs-GST-OsKCH2(721-767), GFP-OsKCH2 (289-767), GFP-OsKCH2(289-720), GFP-K760A/R761A/R764A/R766A, GFP-OsKCH1(292-744), and GFP-OsKCH1/OsKCH2-were each mixed with microtubules in a BRB80 buffer supplemented with 40 μM taxol, incubated at room temperature for 30 min, and centrifuged at 100,000 × g using a TLA100 rotor (Beckman Coulter) for 20 min at 37°C. Coomassie-stained SDS-PAGE gels were analyzed to compare the protein amount in the supernatant and pellet fractions.
Data availability. The data that support the findings of this study are available from the corresponding author on reasonable request.