Introduction

Among the diverse fields of supramolecular chemistry, coordination-driven self-assembly has emerged as a powerful bottom-up approach to construct various supramolecular architectures ranging from basic 2D macrocycles to large 3D cages with increasing complexity1,2,3,4,5,6,7,8,9,10. The breadth and depth of its scope is further evidenced by the variety of application benefiting from the precisely controlled size, shape, and composition of metallo-supramolecules11,12,13,14,15. With the aim to advance metallo-supramolecules with comparable sophistication as biological self-assembly, three strategies have been extensively approached, i.e., design new structures with increasing complexity, introducing functional moieties with broad diversity into well-defined supramolecular scaffolds, and host−guest encapsulation16,17,18,19. Within this field, the combination of chromophores with metallo-supramolecules as light-emitting materials attracted considerable attention because of their broad applications in light-emitting diodes, sensors, photoelectric devices, bioimaging, and so on20,21,22,23.

Recently, tetraphenylethylene (TPE) as an archetypal fluorophore has been incorporated into metal−organic frameworks (MOFs)24,25,26, covalent organic frameworks (COFs)27,28,29, metallo-macrocycles30,31,32,33, and metallo-cages34,35,36,37,38 to construct luminescent materials based on aggregation-induced emission (AIE)39, an effect caused by the restriction of intramolecular rotation (RIR)40, 41. In most cases of coordination system, RIR was achieved through anchoring TPE fluorophores to metal ions within rigid scaffolds in order to block the non-radiative path and activate the radiative decay; the TPE-containing ligands typically consist of small substitutes, e.g., carboxylate or pyridine for the coordination21. Therefore, RIR was mainly attributed to metal-coordination, by which the intramolecular motions are partially restricted.

In this study, we report the design and synthesis of three generations of AIE-active ligands with full conjugation of TPE with 2,2′:6′,2″-terpyridine (TPY)42, 43, which is weakly luminescent (Φem = 3 × 10−3) and becoming increasingly popular in metallo-supramolecular chemistry for the self-assembly of coordination polymers and discrete supramolecular architectures44,45,46,47. The larger conjugation and bulky size of the TPY substituents result in the intramolecular rotations partially restricted even in solution, and thus lead to emission in both solution and aggregation states. Furthermore, TPE-TPY ligands are assembled with Cd(II) through coordination to introduce additional RIR and immobilize fluorophores into metallo-macrocycles, or rosettes-like scaffolds. Using ditopic ligand, a mixture of macrocycles is obtained; in contrast, discrete double-layered hexameric and triple-layered heptameric rosettes with increasing structural complexity are assembled with tetratopic and hexatopic ligands, respectively, through multivalent interactions. More importantly, the fluorescent behavior of TPE-TPY ligands is preserved in these rosettes, which display tunable emissive properties with respect to different generations.

Results

Synthesis and characterization of supramolecular rosettes G1−G3

With the goal of increasing the RIR and structural complexity, L1, L2, and L3 were synthesized by introducing multiple TPY groups onto TPE core through several steps of Suzuki or/and Sonogashira couplings in decent yields as shown in Supplementary Figures 1-3. All the ligands were fully characterized by nuclear magnetic resonance (NMR), including 1H, 13C, two-dimensional correlation spectroscopy (2D-COSY), nuclear Overhauser effect spectroscopy (2D-NOESY), rotating frame nuclear Overhauser effect spectroscopy (2D-ROESY), high-resolution electrospray ionization time-of-flight (ESI-TOF) and matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectrometry. They were assembled with Cd(NO3)2 in exact stoichiometric ratios in CHCl3/MeOH mixed solvent to form three generations of supramolecular rosettes, G1G3, without any separation in high yields (Fig. 1). Note that a mixture of macrocycles was obtained in the self-assembly of L1, instead of discrete hexamer (G2) and heptamer (G3) assembled by L2 and L3, respectively.

Fig. 1
figure 1

Self-assembly of supramolecular rosettes G1G3. a L1 assembled with Cd2+ to form a mixture of trimer, tetramer, pentamer, and hexamer macrocycles (G1); b L2 assembled with Cd2+ to form a discrete hexamer (G2); c L3 assembled with Cd2+ to form a discrete heptamer (G3)

The formation of the macrocyclic structures was first documented by NMR spectroscopy (Fig. 2 and Supplementary Fig. 38). Compared with the sharp 1H-NMR signals of the ligands, the spectra of the supramolecules, G1G3, display remarkable broaden peaks of all protons, due to their much slower tumbling motion on the NMR time scale4. These peaks of G2 (Supplementary Fig. 59) and G3 (Supplementary Fig. 60) were getting much sharper with increasing temperature from 293 to 333 K. For instance, in the spectra of L2 and G2 (Fig. 2a), signals of 3′, 5′ and a3′, a5′ protons of G2 shifted downfield (ca. 0.3 p.p.m.) compared with those signals of L2; while peaks assigned to 6, 6″ and a6, a6″ protons of TPY shifted significantly upfield (ca. 0.7 p.p.m.) due to the electron shielding effect47. These characteristic shifts are caused by TPY−Cd(II) coordination and consistent with the previous reports43. The spectra of G3 (Fig. 2b) and G1 (Supplementary Fig. 38) showed the similar variation of the signal locations. All NMR resonances of ligands and supramolecular rosettes were unequivocally assigned by 2D-COSY, and NOESY (Supplementary Figs. 1560), indicating that a set of macrocycles were assembled rather than random linear supramolecular polymers.

Fig. 2
figure 2

1H-NMR spectra. a L2 and G2; b L3 and G3; c DOSY of G1; d DOSY of G2; e DOSY of G3 (500 MHz, 300 K, CDCl3 for ligands and CD3CN for supramolecules)

The molecular compositions of the supramolecular rosettes were further obtained with the aid of ESI-TOF MS and traveling-wave ion mobility mass spectrometry (TWIM-MS)48. The ESI-TOF MS of G1 shows that it is a mixture of trimer, tetramer, pentamer, and hexamer (Supplementary Figs. 5 and 8) in the self-assembly of L1 with Cd(II). It is consistent with the previous reports that the angle between two TPY groups of the ditopic ligands are flexible to form various rings47. Furthermore, the components of G1 could be varied by changing the concentration (Supplementary Fig. 11). In contrast, G2, shows one series of peaks with continuous charge states from 10+ to 19+ in ESI-MS (Fig. 3a), corresponding to successively losing of PF6 counterions. As expected, the averaged measured molecular mass of G2 is 14498 Da, corresponding to a double-layered hexameric rosette with the formula of [(C110H88O2N12)6Cd12(PF6)24]. The experimental isotope pattern of each charge state agrees very well with the theoretical distribution (Supplementary Fig. 9). The TWIM-MS of G2 (Fig. 3b) displays a single set of signals with narrow drift time distribution at each charge state, suggesting the formation of a rigid and discrete assembly. Therefore, multivalent interactions introduced by the tetratopic ligand resulted in high density of coordination sites (DOCS)47, 49 and provided more geometric constraints to prevent self-assembly from forming multiple entities and to reach the most thermodynamically preferable structure.

Fig. 3
figure 3

ESI/TWIM-MS spectrum. a ESI-MS and b TWIM-MS plots of G2; c ESI-MS and d TWIM-MS plots of G3. The peaks of Fn+ denote fragments [G3L3nPF6]n+

With increasing structural complexity, G3 also displays one dominant set of peaks (11+ to 21+) in ESI-MS (Fig. 3c). Surprisingly, the averaged measured molecular mass of G3 after deconvolution is 27,599 Da, which perfectly matches with a formula [(C186H150O6N18)7Cd21(PF6)42] corresponding to a triple-layered heptameric rosette structure instead of hexamer. It should be noted that the minor signals (Fn+) were assigned carefully as the fragments of G3 due to high voltage applied in ESI source to improve the ionization efficiency of large assemblies (Supplementary Fig. 6). The ESI-MS of G3 with different ionization voltages provided further evidence for the formation of these fragments (Supplementary Fig. 7). The TWIM-MS spectrum of G3 (Fig. 3d) was also recorded and presented a narrowly distributed band of signals. The experimental and calculated isotope patterns of each charge state of G3 are also summarized in Supplementary Fig. 10. In the well-documented metallo-macrocycle self-assembly16, it is very rare to construct discrete triple-layered heptameric macrocycles through direct self-assembly without separation in high yield. We speculated that the formation of G3 with heptamer composition instead of hexamer could be attributed to the geometry feature of L3. According to the molecular simulation of hexamer and heptamer assembled by L3, the structure of hexamer (Supplementary Fig. 14c) exhibits higher torsion energy (567.91 kcal mol−1) than that (499.27 kcal mol−1) of heptamer. Therefore, the self-assembly preferred the formation of heptamer rather than hexamer.

The sizes and shapes of the supramolecules can be validated by further analyzing the collision cross sections (CCSs) obtained from TWIM-MS47, 49. Experimental CCSs values of G2 and G3 on each charge state are summarized in Supplementary Table 1. The averaged measured CCSs value of G2 is 2041 Å2, which is smaller than that of the higher generation assembly, G3 (3821 Å2). Through molecular dynamics simulation (Supplementary Figs. 1213), the averaged calculated CCSs from 70 candidate structures of G2 and G3 are 2065 and 3981 Å2, respectively. The good agreement of calculated and experimental results further supports the rosettes structures of the assemblies.

The 2D diffusion-ordered NMR spectroscopy (DOSY) experiments provide more structural information on the size and purity of G1G3 (Fig. 2c−e). Strongly consistent with the ESI-MS results, DOSY spectrum of G1 shows at least three well-split signal bands, indicating the mixed cyclic structures in G1. By contrast, narrow dispersed band of signals was displayed in the DOSY spectra of G2 and G3, suggesting that no other structures existed in the self-assembly. The measured diffusion coefficients (D) of G1G3 are gradually decreased from 9.07 × 10−10 m2 s−1 (the average value of G1 mixtures) to 2.51 × 10−10 m2 s−1 (G2) and 1.78 × 10−10 m2 s−1 (G3). The decreasing D-values are corresponding to the increasing size of these supramolecules, consistent with the results obtained from TWIM-MS and molecular simulation.

Transmission electron microscopy (TEM) was utilized to image the giant 2D supramolecular rosettes, G2 and G3, in order to further confirm their shapes and sizes. In TEM image (Fig. 4b, f), individual circular patterns were clearly observed for both G2 and G3. The size information obtained from TEM are comparable to the theoretical diameter of 6.3 and 8.6 nm for G2 and G3 (Fig. 4a, e), respectively. We also collected atomic force microscopy (AFM) images of G2 and G3 on mica surface (Fig. 4i−k,l−n, and the statistical height histograms of the particles were summarized in Supplementary Figs. 99100). Both rosette shaped supramolecules displayed high density of individual dots, among which major part of the dots showed comparable measured height ca. 2.0 nm. All attempts to grow X-ray-quality single crystals of G2 and G3 have so far proven unsuccessful. Nevertheless, we obtained fiber-like nanostructures for both G2 and G3 (packing cartoon shown as Fig. 4c, g). TEM imaging showed the formation of tubular structures through the stacking of individual supramolecular rosettes (Fig. 4d, h, and Supplementary Figs. 101102). The diameters of nanotubes are consistent with those of individual supramolecule by molecular modeling given the contribution from alkyl chains.

Fig. 4
figure 4

TEM and AFM images of G2 and G3. Representative energy-minimized structure from molecular modeling of a G2 and e G3 (alkyl chains are omitted for clarity); TEM images of single molecular b G2 (scale bar, 30 nm and 10 nm for zoom-in image) and f G3 (scale bar, 100 nm and 30 nm for zoom-in image); proposed stacking structure of c G2 and g G3; TEM images of nanotubes assembled by d G2 (scale bar, 200 nm) and h G3 (scale bar, 200 nm) 0.5 mg mL−1 in acetonitrile solution under isopropyl ether vapor; AFM images of i, j G2 (scale bar, 2 μm and 100 nm, respectively) and l, m G3 (scale bar, 2 μm and 100 nm, respectively); 3D AFM images of k G2 and n G3

Emission and AIE effects of L1L3. After structural characterization of organic ligands and supramolecules, we conducted detailed photo-property studies. Considering the solubility of L1L3, we eventually chose CH2Cl2 and methanol as good and poor solvent, respectively, to perform the studies (Supplementary Fig. 61, absorption spectra; Supplementary Figs. 6870, emission spectra). All these three ligands are non/weak-luminescent in CH2Cl2, but showed apparent AIE effect by gradually increasing the volume fraction of the poor solvent, methanol. It is worth noting that L2 and L3 displayed stronger emission in pure CH2Cl2 than L1 due to the RIR caused by multiple bulky TPY groups. Also, L2 and L3 showed AIE effect with high efficiency and quantum yields (ΦF) at 65.5% and 55.6%, respectively (determined in 90% methanol fraction, Supplementary Figs. 6970). By contrast, L1 displayed much weaker AIE effect in various methanol fraction mixture (ΦF < 5%). In addition, variation of the topology of the ligands tuned the maximum emission wavelength from 425 nm (L1) to 580 nm (L2, dual emission, another peak centered at 440 nm), and 475 nm (L3), under the aggregation state (90% methanol fraction). The distinguished dual emission bands of L2 are attributable to the local excited (LE) state of TPE (shorter wavelength), as well as the intramolecular charge transfer (ICT) from electron donor (TPE) to the electron acceptor (TPY) moieties (longer wavelength)50. Under the solid state (Supplementary Fig. 79), all the three ligands emit long wavelength light centered at around 520 nm, ascribed to ICT states.

Emission and AIE effects of supramolecular rosettes G1−G3

We reasoned that through further RIR by coordination, the assemblies with rosettes structures would exhibit high emission efficiency not only in aggregation, but also in solution state. The absorption spectra of G1G3 were summarized in SI (both solution and aggregation states, Supplementary Figs. 6263). The emission spectra of the supramolecules, G1G3, in acetonitrile as the good solvent were recorded in Figs. 5, 6 and Supplementary Figs. 7172. In solution, as expected, G2 and G3 displayed remarkable increment in ΦF values (2- and 6-fold, respectively) compared to their corresponding ligands, L2 and L3. It is benefited from the RIR effect caused by the rigid supramolecular scaffold, in which, the rotation around the TPE groups is further restricted. By comparison, G1 in solution remained weak emission as its ligand, due to its freely rotating phenyl groups outside the metallo-macrocycle rings.

Fig. 5
figure 5

AIE of G2. a Fluorescence spectra (λex = 320 nm, c = 1.0 µM), b CIE 1931 chromaticity diagram, (the crosses signify the luminescent color coordinates), c quantum yields, and d photographs of G2 in CH3CN/methanol with various methanol fractions; e fluorescence spectra (λex = 320 nm, c = 1.0 µM), f CIE 1931 chromaticity diagram, g quantum yields, and h photographs of G2 in CH3CN/water with various water fractions. G2 samples were excitation at 365 nm on 298 K (c = 1.0 μM)

Fig. 6
figure 6

AIE of G3. a Fluorescence spectra (λex = 320 nm, c = 1.0 µM), b quantum yields, and c photographs of G3 in CH3CN/methanol with various methanol fractions; d fluorescence spectra (λex = 320 nm, c = 1.0 µM), e quantum yields, and f photographs of G3 in CH3CN/water with various water fractions. G3 samples were excitation at 365 nm on 298 K (c = 1.0 μM)

In sharp contrast with L1, macrocycles mixture, G1, shows gradually enhanced ΦF with gradually increasing methanol fraction, i.e., from 0.3% with 0% methanol to 6.7% with 90% methanol. The emission band of G1 (centered at ca. 530 nm) under aggregated state (90% methanol) exhibits 100 nm red shifted than its ligand, ascribed to ICT emission. In order to further investigating the AIE properties of G1, a poorer solvent, water, was used instead of methanol, to facilitate the aggregation of G1. By increasing the water content, ΦF value was increased rapidly from around 10 to 70% (Supplementary Fig. 72), an extraordinary enhancement compared with the value tested in acetonitrile/methanol mixture, indicating more intense aggregation of G1 in water environment.

More intriguingly, the optical feature of G2 in solution and aggregation state showed rare room temperature white-light emission38, 51. The emission spectrum of G2 in pure acetonitrile (Fig. 5a) displayed two main bands centered at 450 nm and 580 nm, ascribed to the LE and ICT states, respectively. Compared with L2, G2 displayed a ca. 30 nm redshift, as well as broader bands in emission curve, which covered almost the entire visible spectral region (~400−700 nm). By increasing the fraction of methanol, intensity of the ICT band slightly increased, because the polar solvent facilitates the ICT process50. Changing the poor solvent to a higher polar one, water, further enhanced the intensity of the ICT band and suppresses the LE band (Fig. 5e), and consequently changed the emission color. In the case of 60% water fraction, G2 emitted pure white light with coordination (0.325, 0.355) (Fig. 5f) in 1931 Commission Internationale de L’Eclairage (CIE) chromaticity diagram, extremely close to the value of theoretical white light (0.333, 0.333)38, 51. In the case of 90% water fraction, only ICT band was observed, and the solution emitted yellow light instead of white light. G2, as a discrete rosette-like supramolecule, could be an outstanding candidate for white-light emission and color tunable optoelectronic materials.

The ΦF values of G2 in both acetonitrile/methanol (8–12% shown in Fig. 5c) and acetonitrile/water systems (8–20% shown in Fig. 5g) increased with the increment of the fraction of poor solvents, corresponding to AIE effect. The slow enhancement in quantum yields is perhaps partially brought about by aggregation-caused quench (ACQ) effect51. The ACQ effect probably comes from the face-to-face stacking structure of G2 within the aggregates, due to the large and rigid 2D structures of G2 assembled by all π conjugated moieties. Consequently, ΦF values remained at a moderate level because of the opposite effects on emission intensity.

The emission behavior of G3 was also investigated in both acetonitrile/methanol and acetonitrile/water solvents. The spectra show ICT emission peaks centered at ca. 550 nm with green–yellow color (Fig. 6c, f). The ΦF values of G3 in acetonitrile/water system first increased and then decreased by gradually increasing the fraction of water, with maximum ΦF value as 60% (30% water fraction, Fig. 6e). It is also attributed to the opposite effects from AIE of TPE groups and ACQ of π stacked moieties as described in the case of G2. In acetonitrile/methanol system, ΦF values slightly decreased, and exhibited a minimum point at 40% methanol (ΦF = 12%, Fig. 6b), and then increased again by adding more amount of methanol. It indicates that in acetonitrile/methanol system, the starting and saturated point of ACQ effect appeared at lower fraction of poor solvent than AIE effect; the competition between ACQ and AIE; however, was reversed in the acetonitrile/water system.

2D-fluorescence measurements of G1G3 (Supplementary Figs. 7378) are consistent with 1D-fluorescence results. No other light-emitting species was observed. The 2D-fluorescence results of supramolecular rosettes show the independence of emission from excitation. The ICT bands (emission maxima and peak shape) of G1−G3 are strongly sensitive to the solvent polarity (Supplementary Figs. 8486). It is consistent with the reported CT emissions50. The intensity of LE emission of G1 (Supplementary Fig. 95) and G3 (Fig. 6a) is relatively low, due to the flexibility of the TPE backbone (G1) or suppressed by strong ICT emission (G3). Furthermore, as shown in Supplementary Figs. 92-94, the overlapped emission spectra and the absorption spectra of G1G3 are prone to the energy transfer (ET) process52. In addition, the strongest ICT effect of G3 among three rosettes leads to the longer wavelength emission dominant. Emission spectra of G1G3 under solid state were also recorded in Supplementary Fig. 80, in which all of the assembly powders show single and broad peaks centered at around 500 nm. All these peaks are assigned to ICT process. Compared with the corresponding spectra recorded in the aggregation state, for instance, 90% water fraction, all these peaks show around 50 nm blueshift, because the polar solvent, water, facilitates charge separation of ICT process. Lifetimes of the supramolecules in both air saturated and degassed solution were determined with all values in ns scale, suggesting a typical fluorescent emission (Supplementary Figs. 8891). In order to further investigate fluorescence process, temperature dependent fluorescence spectra of G1G3 (Supplementary Figs. 8183, from −46 to 50 °C) and concentration dependent spectra of G1 (Supplementary Figs. 87) were also recorded. In addition, the association constants of model compound 16 (Supplementary Fig. 4) binding with Cd(NO3)2 were measured in different solvents by titration experiments (Supplementary Figs. 6467). For example, the overall association constant in CHCl3/MeOH (v/v, 1/2) is 4.17 × 1010 M−2.

To further investigate the emission properties of G1G3, we studied their aggregation behaviors by TEM and dynamic light scattering (DLS). G2, for instance, aggregated into nanosphere particles in acetonitrile/methanol, revealed by TEM images (Fig. 7c−j), and the size of the particles were increased along with the increment of methanol fraction. DLS results also show that the average hydrodynamic diameters (Dh) of the nanospheres increased from 16 (20% methanol) to 24 nm (40% methanol), 37 nm (60% methanol), and 78 nm (80% methanol), with narrow distribution (Fig. 7a). Compared with the results in acetonitrile/methanol mixtures, G2 aggregated into much larger nanospheres in 20% and 40% water contents (108 nm and 285 nm, respectively, Fig. 7b, k−n), and the nanospheres merged into necklace-like aggregates in higher water contents(Figs. 7o−r), in which the aggregates were too large for DLS measurements. These results well agree with the higher AIE effect observed in acetonitrile/water than in acetonitrile/methanol mixtures. Similar aggregation behaviors were observed in G1 and G3 systems (Supplementary Figs. 9698 and 103106).

Fig. 7
figure 7

DLS data and TEM images of G2 aggregates. Size distribution of G2 in a acetonitrile/methanol, and b acetonitrile/water mixtures by DLS (the percentages in the graphs are the poor solvent contents); TEM images of the aggregates of G2 formed in acetonitrile/methanol mixtures containing c, d 20%, e, f 40%, g, h 60%, and i, j 80% methanol (scale bar 500 nm for the upper images and 100 nm for the lower images, respectively), and aggregates of G2 formed in acetonitrile/water mixtures containing k, l 20% (scale bar, 2 μm and 500 nm, respectively), m, n 40% (scale bar, 2 μm and 500 nm, respectively), o, p 60% (scale bar, 1 μm and 500 nm, respectively), and q, r 80% water (scale bar, 1 μm and 500 nm, respectively)

Discussion

In summary, we report the design and synthesis of three generations of AIE-active ligands with full conjugation of TPE with TPY. Instead of forming a mixture of macrocycles by ditopic ligands, such multitopic building blocks provided more geometric constraints in the self-assembly through multivalent interactions to prevent the formation of multiple entities and to reach the most thermodynamically favorable structures, i.e., double-layered hexameric and triple-layered heptameric rosettes-like scaffolds in a precisely controlled manner. Along with the increasing structural complexity, the multiple bulky TPY groups and multivalent interactions by coordination introduce enhanced RIR to immobilize TPE fluorophores into metallo-supramolecular architectures. In addition to preserving the emissive property of individual building block, such assembled supramolecular rosettes exhibit unique properties that are not displayed by their individual components. Remarkably, G2 exhibited highly pure white-light emission property under wide range of good/poor solvents ratios. As such, this study may provide an alternative strategy in the seeking of novel light-emitting materials.

Data availability

The data that support the findings of this study are available from the authors on reasonable request, see author contributions for specific data sets.