Mechanotransduction is a strong driver of mesenchymal stem cell (MSC) fate. In vitro, variations in matrix mechanics invoke changes in MSC proliferation, migration and differentiation. However, when incorporating MSCs within injectable, inherently soft hydrogels, this dominance over MSC response substantially limits our ability to couple the ease of application of hydrogels with efficiently directed MSC differentiation, especially in the case of bone generation. Here, we identify differential miRNA expression in response to varying hydrogel stiffness and RhoA activity. We show that modulation of miR-100-5p and miR-143-3p can be used to bias MSC fate and provide mechanistic insight by demonstrating convergence on mTOR signalling. By modulating these mechanosensitive miRNAs, we can enhance osteogenesis in a soft 3D hydrogel. The outcomes of this study provide new understanding of the mechanisms regulating MSC mechanotransduction and differentiation, but also a novel strategy with which to drive MSC fate and significantly impact MSC-based tissue-engineering applications.
Mesenchymal stem cells (MSCs) are attractive candidates for tissue engineering, as a result of their availability, immunosuppressive properties and ability to differentiate into bone, cartilage, fat and other stromal cell types1,2. When combined with tailored biomaterial systems, such as bio-synthetic hydrogels, MSC-based tissue-engineering strategies have tremendous potential to revolutionise the manner by which we repair and regenerate damaged tissues including bone, cartilage, tendon and intervertebral disc. However, in reality, without methods for efficient differentiation of MSCs within these biomaterials, it is difficult to ensure formation of the desired tissue type. This currently presents a major challenge for the field, and our ability to direct MSC differentiation must be improved in order to successfully generate functional new tissue. Improving our knowledge of MSC-biomaterial interactions and how such interactions determine fate specification, as well as developing new strategies that utilise this knowledge to successfully drive cell fate within hydrogels, will help realise their potential for tissue generation.
It is well established that MSCs are highly sensitive to physical stimuli from their surrounding microenvironment, including matrix viscoelastic properties3,4, topography5, extracellular matrix (ECM) specificity6 and mode of ligand presentation7. In particular, substrate stiffness (elastic modulus) has received significant attention and has proven to be an important cue in directing MSC proliferation and differentiation, with soft substrates favouring differentiation into adipocytes or neurons while stiff substrates promote osteoblast differentiation4,8,9. Such cues highlight the vital role that biomaterial cues may play when optimising the differentiation of MSCs in composites for tissue engineering.
The common link between the various physical stimuli that impact upon MSC fate is their ability to alter MSC mechanotransductive signalling and subsequent morphology via the RhoA, Rac and Cdc42 GTPases. These GTPases regulate cytoskeletal and focal adhesion composition and function, associated changes in cell spreading and morphology, and ultimately impact cell fate10. The role of such mechanotransductive signalling in MSC fate was first established by McBeath et al.11. who demonstrated that highly spread MSCs were osteogenic, rounded MSCs were adipogenic and that the osteo-adipogenic fate switch was mediated by differences in RhoA activity. Subsequently, Rac1 activity has been reported to direct a similar switch between well-spread smooth muscle cells and rounded chondrogenic MSCs in the presence of TGFβ312. In the presence of BMP2, inhibition of Rac1 activity has also been shown to promote MSC osteogenesis13. Rac1 was also shown to be critical in regulating the impacts of variations in substrate viscoelasticity on MSC fate, including changes in lineage specification, cytoskeletal stress and mitosis14.
Manipulation of mechanical signalling offers the opportunity to direct MSC differentiation towards a particular lineage and enhance the efficiency of conversion to a specified mature cell type for tissue-engineering applications. However, traditional methods of signalling modulation, such as growth factors and small molecule inhibitors may prove difficult to translate effectively into clinical treatments, due to their lack of specificity for the target cell, stability and cost. For these reasons, modulation of cell behaviour via small oligonucleotides, including microRNAs (miRNAs), is an attractive proposition. miRNAs, a class of small regulatory RNAs (~22 bp), offer a relatively simple, inexpensive and scalable way to guide cellular activities. They regulate gene expression by either changing mRNA stability or inhibiting protein translation15, and in doing so, modulate the activity of several target genes and converge upon signalling/regulatory networks16, helping to generate an extremely robust biological output.
miRNAs play important roles in directing MSC fate, including proliferation, osteogenesis, adipogenesis and chondrogenesis17,18,19,20. Interestingly, the pro-osteogenic effect of miR-138 was mediated by its effects upon focal adhesion kinase (FAK), suggestive of a link between miRNA signalling, MSC mechanotransduction and MSC fate21. There are also many further indications of miRNAs acting at all levels of the mechano-regulatory hierarchy, from ECM proteins to integrins, focal adhesion and cytoskeletal components, as well as RhoA, Rac, Cdc42 and the guanine nucleotide exchange factors and GTPase-activating proteins (GAPs) that regulate their activity22,23. However, the potential of using miRNAs to modulate MSC mechanotransductive pathways and subsequent fate has not been addressed to date.
In this study, we investigate the role of miRNA signalling in response to variations in substrate stiffness and evaluate how modulation of mechanosensitive miRNAs can be used to drive MSC fate in injectable hydrogels. We identify and validate a panel of miRNAs that are differentially expressed both in response to changing substrate stiffness and RhoA activity, and further demonstrate that modulation of these candidate miRNAs can alter MSC osteo-adipogenic differentiation bias. We provide an insight into the mechanism of action by showing that miR-100-5p and miR-143-3p converge on mTOR signalling. Finally, we prove that modulation of these mechanosensitive miRNAs can significantly enhance osteogenesis in a 3D soft hydrogel, confirming the utility of this novel approach. Together the outcomes of this study provide new insight into the regulatory role of miRNAs in mechanotransduction and suggest a novel application of miRNAs in harnessing mechanical signalling to successfully drive MSC differentiation towards osteogenesis in soft hydrogels. This strategy can be applied to a multitude of other tissue targets, and thus is seen to have significant potential to impact MSC-based tissue-engineering applications.
MSC properties in response to substrate stiffness and RhoA
Using polyacrylamide (PAM) gels functionalised with collagen-1, we first characterised the properties of hMSCs in response to varying substrate stiffness and RhoA inhibition. hMSCs were seeded onto stiff and soft gels with a Young’s modulus of 70 and 0.6 kPa, respectively (Supplementary Fig. 1). Given our hypothesis that high RhoA activity on stiff substrates and low RhoA activity on soft substrates is a critical mediator of the hMSC response to substrate stiffness, in a third variant, hMSCs on stiff substrates were treated with C3T, a potent and specific RhoA inhibitor. There were evident changes to hMSC morphology in response to these alterations, with hMSCs on stiff substrates being well-spread with highly aligned and thick actin fibres, while those on the soft substrates were much smaller and highly elongated, with narrow and more randomly oriented actin fibres. hMSCs treated with C3T showed a different morphology and were highly spread, with a polygonal shape and actin fibres localised predominantly to the periphery of the cell body (Fig. 1a). Image analysis confirmed these changes in cell spread area, aspect ratio and circularity (Supplementary Fig. 2).
Determination of RhoA activity using FRET biosensors confirmed that RhoA activity was significantly decreased both by the C3T inhibitor and in hMSCs on soft substrates, as compared to MSCs on stiff substrates (Fig. 1b). Using a Rac1 biosensor14, we showed that conversely Rac1 activity was elevated in these hMSC populations (Fig. 1c). To determine what impact these changes had on hMSC fate, cells under our three model conditions were treated with a 1:1 mixture of osteogenic and adipogenic supplements. Given all of the necessary soluble factors for both osteogenic and adipogenic differentiation, hMSCs on the stiff substrates predominantly became osteogenic, while hMSCs on the soft substrates, or treated with C3T, were biased towards adipogenesis. This was evident by the significant reduction in the percentage of osteoblasts in hMSC populations treated with C3T, or on 0.6 kPa substrates as compared to MSCs on 70 kPa substrates (Fig. 1d, e).
miRNA expression in response to substrate stiffness and RhoA
To determine whether there are differences in miRNA expression in response to substrate stiffness or RhoA activity, miRNA sequencing was performed on samples from three independent hMSC donors using cells cultured under the three conditions (70 kPa, 70 kPa + C3T and 0.6 kPa) for 24 h. Within each condition, approximately 400 miRNAs were expressed and differences were observed both in the presence or absence of specific miRNAs (Fig. 2a) as well as the expression level of many miRNAs (Fig. 2b, Table 1 and Supplementary Tables 1–9). Clustering of the samples indicated that the C3T-treated cells shared similarities with both cells on 70 and 0.6 kPa substrates, with two samples clustering with cells from 70 kPa substrates and one clustering within the 0.6 kPa substrate set (Supplementary Fig. 3).
For each differentially expressed miRNA, candidate target mRNAs were predicted from Targetscan and analysed using Ingenuity Pathway Analysis. Supplementary Data 1–3 list all the 'canonical pathways' showing significant enrichment in the lists of these target genes. Overlap was observed between the lists, including for many pathways associated with mechanotransduction (Actin Cytoskeleton Signaling, HIPPO signalling, FAK signalling, Integrin signalling) and particularly RhoA and GTPase signalling (Regulation of Actin-based Motility by Rho, RhoA Signaling, RhoGDI Signaling, Rac signalling, Cdc42 signalling), as well as some of the major developmental signalling pathways (BMP, FGF, Wnts) and other pathways known to be involved in regulation of MSC fate (Adipogenesis pathway, PPAR signalling, Role of Osteoblasts, Osteoclasts and Chondrocytes in Rheumatoid Arthritis, mTOR Signaling).
We selected a panel of miRNA candidates for further investigation, focussing on candidates that showed the greatest difference in expression between the conditions, as well as those being expressed at moderate to high levels of counts in the sequencing data (Fig. 2b). Validation of differentially expressed miRNAs was performed by qPCR using samples independent to those used for sequencing and showed the same trends as the sequencing data (Fig. 2b, c). A further comparison with expression levels after 7 days culture showed that these trends were largely maintained and often more stark at this later timepoint (Fig. 2c).
Modulation of miRNA signalling can influence MSC fate
Given the large difference in hMSC lineage specification induced by substrate stiffness and RhoA activity, we next determined what impact the modulation of these differentially expressed miRNAs might have on the differentiation bias of hMSCs. hMSCs were transfected with miRNA mimics or inhibitors, cultured on both soft and stiff substrates in mixed induction medium and the change in bias between osteogenesis and adipogenesis determined.
Across both 70 and 0.6 kPa substrates, no consistent effect on hMSC fate bias was observed for miR-122-5p, miR-21-5p or miR-335-3p. However, mimics of miR-100-5p and miR-143-3p, both of which were expressed at greater levels in stiff substrates, caused a significant increase in the proportion of osteoblasts when compared to cells treated with a control oligonucleotide (Fig. 3a, c; Supplementary Fig. 4). On the 70kPa substrate, combining mimics of both miR-100-5p and miR-143-3p had a larger effect than modulating either miRNA individually. Inhibition of these miRNAs had the opposite effect on hMSC differentiation bias to the mimics, with miR-100-5p, miR-143-3p and both miR-100-5p, and miR-143-3p together causing a significant decrease in the proportion of osteoblasts in the culture (Fig. 3b, d).
Mechanosensitive miRNAs modulate MSC fate via mTOR pathway
A closer analysis of the predicted targets of miR-100-5p and miR-143-3p, both of which showed the most significant impact upon the differentiation of hMSCs, revealed a potential convergence upon mTOR signalling, with miR-100-5p targeting mTOR itself, while RICTOR and LARP, both key components of the mTOR network, were predicted targets of miR-143-3p. Western blotting showed upregulation of mTOR and Rictor with C3T treatment and on 0.6 kPa substrates- the conditions in which we observed decreased expression of miR-100-5p and miR-143-3p (Fig. 4a, Supplementary Fig. 5A). These changes were mirrored by changes in the expression of mRNA for these genes, suggesting that regulation of transcript levels may be the mechanism via which these changes in protein expression are achieved (Supplementary Fig. 5B and C). There was no apparent difference in Larp1 protein levels, although an increase in LARP1 was also detected at the mRNA level.
Confirming the regulation of these mTOR components within our system, transfection of hMSCs with a mimic of miR-100-5p decreased mTOR levels, while co-transfection of miR-100-5p and miR-143-3p mimics reduced Rictor and Larp1 protein levels. Conversely, mTOR and Rictor expression was elevated in MSCs treated with inhibitors of miR-100-5p, miR-143-3p or both and Larp1 levels were increased in the presence of miR-143-3p mimic (Fig. 4b; Supplementary Fig. 6A). qPCR verified that these changes were likely caused by upregulation of transcript levels for mTOR. Likewise, treatment with miR-143-3p inhibitor increased RICTOR and Larp1 transcript levels (Fig. 4c, d).
To provide functional validation of the interaction of miR-100-5p with mTOR, we used a dual luciferase/alkaline phosphatase (ALP) reporter system to probe the interaction of miR-100-5p with the 3′UTR of FRAP1 (mTOR). Scrambled control oligonucleotides did not alter reporter activity from untreated levels, but miR-100-5p mimics and inhibitors significantly decreased and increased reporter activity respectively, thus confirming a direct interaction between miR-100-5p and mTOR regulation in our cells (Fig. 4e).
We next treated hMSCs with rapamycin, an inhibitor of mTOR, to determine whether this would have similar effects to downregulation of mTOR components mediated by miR-100-5p and miR-143-3p. In a differentiation bias assay, rapamycin caused a similar effect to miR-100-5p/143-3p mimics and enhanced the bias of differentiation towards osteogenesis (Fig. 4f). Western blotting confirmed the inhibition of mTORC1 with 50 nM rapamycin, by an increase in phosphorylation of Akt at serine 473. Under this inhibition by rapamycin, we observed no change to mTOR, or Raptor protein levels, an increase in Rictor and a decrease in Larp1 expression (Fig. 4g, Supplementary Fig. 6B).
To further confirm that mTOR signalling is modulated by miR-100-5p and miR-143-3p, MSCs were transfected with inhibitors of miR-100-5p and miR-143-3p and treated with rapamycin. Consistent with our previous results, inhibition of both miR-100-5p and miR-143-3p enhanced the bias towards adipogenesis resulting in a decrease in the proportion of osteoblasts in the culture (Fig. 5; Supplementary Fig. 7). The addition of 50 nM rapamycin caused a significant change towards osteogenesis. No significant differences were observed between any conditions treated with Rapamycin indicating that inhibition of mTOR signalling is sufficient to overcome differences in differentiation bias caused by inhibition of miR-100-5p and 143-3p. This supports our premise that miR-100-5p and miR-143-3p exert their effects upon MSC fate via mTOR signalling.
Modulation of miRNAs to drive MSC fate in 3D hydrogels
Finally, we investigated whether modulation of miRNAs could be used to drive the fate of hMSCs in soft 3D hydrogel constructs (G′ = 2.4 kPa)24. hMSCs were transfected with miRNA modulators, encapsulated in photo-crosslinkable gelatin-PEG hydrogels24 and cultured in the presence of osteogenic supplements for 14 days.
After 14 days under osteogenic induction in the hydrogels the hMSCs had extended some processes and many of the cells condensed, becoming dark and granular (Fig. 6a). The gels became more opaque throughout the culture period and in several of the samples, white deposits were visible by eye upon fixation. Osteoimage staining for hydroxyapatite deposition showed mineral accumulation in all gels. Compared to scrambled controls, mimics of miR-100-5p and 143-3p significantly increased the amount of mineral deposition (Fig. 6b, c). This was particularly evident for the samples containing cells transfected with both miR-100-5p and 143-3p mimics which had significantly more mineral deposition than in cultures with either miRNA individually. Almost all of the gel volume was filled with mineral, even at this relatively early culture timepoint (Fig. 6c).
The impact of substrate cues upon MSC fate has been well described, but here we provide the first demonstration that miRNA signalling plays a critical role in regulating the response of hMSCs to their physical microenvironment and that, further to this, modulation of mechanosensitive miRNAs can be used to direct hMSC fate.
Using MSCs cultured on patterned substrates to restrict cell spreading, McBeath et al. previously showed that levels of RhoA activity are determined by changes to MSC shape and that this can bias MSCs towards osteogenesis or adipogenesis11. We demonstrated that similar changes to cell spreading, induced by substrate stiffness, can similarly influence RhoA activity and alter the bias towards osteogenic or adipogenic differentiation. Consistent with studies suggesting that RhoA and Rac1 activity act in counterbalance, we observed an increase in Rac1 activity when RhoA activity was decreased25. Interestingly, although the differentiation bias of the hMSCs was instructed by both substrate stiffness and RhoA inhibition, the cytoskeletal architecture of MSCs on soft substrates and those treated with C3T was not identical. It is, however, interesting to note that both actin architectures would lead to low levels of tension across the cell, when compared to the cytoskeleton of MSCs on 70 kPa substrates, which further links back to the findings of McBeath et. al. regarding the link between increased cytoskeletal tension, RhoA activity and osteogenic fate11. The fundamental reasons for these differences will form an interesting avenue for future studies. However, due to the similarly reduced RhoA activity and subsequent increase in bias towards an adipogenic fate in MSCs treated with C3T, or cultured on soft substrates, we used this model to determine the influence of substrate stiffness and RhoA activity on miRNA signalling in MSC fate.
By deliberately selecting strict criteria regarding the inclusion of miRNAs for analysis, we successfully identified a small number (<100) of miRNAs that showed differential expression between our conditions. Importantly, this strategy allowed us to identify miRNAs with significantly different expression levels, but restricted our analyses to those candidates with expression levels likely to be high enough to exert a significant influence on gene regulation. These findings proved robust, as demonstrated by the close correlation between the miRNAseq data and independent qPCR verification. Although miR-138, which regulates osteogenesis in hMSCs has been shown to target FAK21 and differential expression of miRNAs was reported as part of a study using rat MSC cultures on micro-grooved surfaces26, we believe this is the first study to systematically identify changes to hMSC miRNA expression in response to substrate mechanical properties.
Globally, the integration of the miRNAs with mechanotransduction and cell fate regulation was well corroborated by the pathway analysis of the predicted target genes that showed enrichment across pathways involved in cytoskeletal organisation, GTPase signalling and bone or fat formation and maintenance. No systematic differences could be observed in overall pathway contributions when RhoA activity was decreased as a result of either C3T-treatment or soft substrates, with comparisons between all three culture conditions generally acting upon cytoskeletal and Rho/Rac/Cdc42-associated pathways. Despite this, many individual miRNAs were differentially expressed between C3T-treated and soft substrates, perhaps indicative of different routes leading to regulation of these common pathways.
Of the specific miRNA candidates identified here, some have been previously linked to a response to mechanical or matrix cues. This includes miR-21, which has been shown to mediate substrate mechanical memory of MSCs27, miR-21, miR-100 and miR-5096 which changed in response to mechanical stretch in human periodontal ligament stem cells28 and miR-494-3p, which was sensitive to compressive force in MC3T3-E1 cells29. miR-494-3p was further shown to target ROCK1, while miR-122 has been demonstrated to modulate RhoA and influence motility of hepatocellular carcinoma cells30. Many of the miRNAs we identified have also been linked to processes that relate to bone or adipose formation and maintenance31,32,33. This supports our findings that miRNAs in general, and particularly the specific candidates we identified, can regulate both mechanotransductive signalling and MSC differentiation processes.
Of the miRNAs we tested, miR-100-5p and 143-3p had the most influence on hMSC differentiation and were observed to promote osteogenesis. Both miR-100-5p and miR-143-3p showed a significant decrease in response to C3T-treatment and soft substrates, suggesting that downregulation of their expression is related to low RhoA activity and substrate stiffness. Our findings indicate that both miR-100-5p and miR-143-3p enhance osteogenesis. Previous reports have suggested that miR-100 inhibits osteogenesis, which is in contrast to our findings34,35. However, these studies used BMP2 as an inductive factor, and demonstrated the inhibitory effect to be mediated by changes to BMPR234,35. In our study, BMP2 was not used as an osteo-inductive factor and so it is possible that this is the reason for the discrepancy36. miR-100 was also upregulated in Lamin A/C knockout MSCs showing additional changes in gene expression that are otherwise suggestive of a switch away from osteogenesis37. This study directly links mechanotransduction to the nucleus while we observe changes to cytoplasmic signalling pathways and may highlight the intricacies of force transmission between the cytoplasm and nucleus that are yet to be determined. miR-143 has no known link to MSC differentiation. However, levels have been shown to increase in differentiating adipocytes and miR-143 inhibition retards this differentiation38. These data are consistent with a role regulating adipogenic differentiation in MSCs, as observed in our study.
Notably, our analysis of putative targets of the miRNAs showed that both miR-100-5p and miR-143-3p converge upon components of the mTOR signalling network (mTOR, RICTOR, LARP), which is known for its critical role in regulating cell fate. Interestingly, mTORC1 regulates Runx2 and PPARγ39 and mTORC2 links into regulation of RhoA and cytoskeletal remodelling40,41, corroborating the concept that miR-100-5p and 143-3p could regulate both mechanotransductive signalling and hMSC differentiation via mTOR activity. miR-100 has been consistently linked to mTOR in the literature, where it has been shown to regulate proliferation and migration via its effects on mTOR, particularly in cancer cells42,43. miR-143 has also been linked to regulation of mTOR, through inhibition of mTOR and Akt phosphorylation44.
We further showed that hMSCs treated with rapamycin, which primarily inhibits mTORC1, showed an increase in osteogenesis, as well as elevated Akt-ser473 phosphorylation. This correlates with a study by Chen et al. indicating that low concentrations of rapamycin induce Akt phosphorylation by inhibiting mTORC1 pathway45. This is consistent with studies showing that rapamycin promotes osteogenesis46 and that MSCs from mTORC1 (Raptor) knockout mice show an increased osteogenic bias47. However, the exact role of rapamycin in osteogenesis can be context-dependent, with studies showing inhibition or promotion of osteogenesis depending upon specific cell type and concentration of rapamycin used39,48,49,50,51.
The ability of rapamycin to over-ride the effects of miR-100-5p and miR-143-3p inhibitors provided a clear demonstration that the effects of these factors upon MSC fate is mediated by mTOR signalling. We further showed that miR-100-5p targets mTOR itself and so would affect signalling via mTORC1 and mTORC2, while miR-143-3p could exert differentiation effects on both mTORC1 and mTORC2 via Larp1 and Rictor, respectively. Although the relative contributions of these miRNAs to overall mTORC1 and mTORC2 bias remains a topic for future investigation, it is clear that miR-100-5p and 143-3p can both directly modulate key mTOR components and cause analogous changes to MSC differentiation, as observed using the small molecule mTOR inhibitor, rapamycin.
Overall we determined that changes in miRNA expression correlate with differences in substrate stiffness and RhoA signalling, but were not observed to directly to regulate cytoskeletal architecture, instead acting upon downstream factors to impact upon MSC fate. This leads to a proposed mechanism for our findings whereby hMSCs on stiff substrates express high levels of miR-100-5p and 143-3p, have decreased mTORC1 activity and increased osteogenic bias while hMSCs on soft substrates, or with RhoA inhibition, express low levels of miR-100-5p and 143-3p, have increased mTORC1 activity and increased adipogenic bias (Fig. 7).
In accordance with this, we demonstrated greatly increased amounts of hydroxapatite accumulation when modulating miR-100-5p and 143-3p in hMSCs encapsulated in 3D gelatin hydrogels. Importantly, this demonstrates that the modulation of the candidate miRNAs generated a mature osteoblast population and was not limited to initial commitment or effects on early osteogenic markers. Furthermore, this novel approach may have utility to promote hMSC differentiation when combined within biomaterial systems that have future clinical relevance. This is an important finding because effective control of hMSC fate within injectable hydrogels is necessary if they are to be used successfully in the clinic to regenerate new functional tissue.
Our data also provide new insights into cell mechanotransduction and the mechanisms that regulate the response of hMSCs to the surrounding extracellular environment. By providing the first systematic determination of changes to miRNA signalling in response to physical stimuli, we have demonstrated proof-of-concept that miRNA signalling links mechanotransduction to cell fate processes. Specifically, the targets of miR-100-5p and 143-3p highlighted a new role for mTOR signalling in the mechano-regulation of hMSC fate. Given the growing body of research to indicate sensitivity of hMSCs to a wide variety of physical cues, there will undoubtedly be significant future findings regarding miRNA signalling networks that are sensitive to these other cues.
In summary, we have shown for the first time that miRNA signalling in hMSCs is modulated in response to significant variations in substrate stiffness, and that modulation of mechno-sensitive miRNAs provides an effective means to drive hMSC differentiation, even in the presence of mechanical cues expected to drive an alternate image. This provides new insights into the mechanisms that regulate hMSC fate, providing information of specific miRNAs as well as evidence of their mechanism of action via mTOR modulation. Furthermore, given the utility of small RNAs as inexpensive and relatively simple biomolecules to deliver, this study provides the first evidence of a novel avenue to drive hMSC fate for tissue regeneration and could have wide ranging applications in treating musculoskeletal disorders.
Substrate fabrication and functionalisation
Glass coverslips were treated with (3-Aminopropyl)triethoxysilane, fixed through a 30 min incubation in 1% glutaraldehyde, rinsed in dH2O and air dried. Glass slides were treated with chlorotrimethylsilane, rinsed under dH2O dried with nitrogen gas. PAM gels were crosslinked between the treated slides and coverslips, polymerised under nitrogen for 10 min, then left to swell in sterile PBS at 4 °C overnight. The composition of the PAM gels used is shown in Supplementary Table 10. Once swollen, gels were functionalised with 1 mg/mL sulfosuccinimidyl 5(4′-azido-2′-nitrophenyl-amino) hexanoate (sulfo-SANPAH, Abcam), extensively washed with PBS and incubated overnight in 25 µg/mL of Collagen-I (Gibco) diluted in PBS. PAM gels with Young’s modulus of 70 and 0.6 kPa are denoted as stiff and soft substrates, respectively.
The rheological properties of PAM gels were determined using Anton Paar Physica MCR 501 parallel plate Rheometer. PAM gels were placed in 8 mm diameter parallel plates separated by a 0.5 mm gap. Strain sweeps were conducted from 0.1–100% at a frequency of 50 rad/s. Frequency sweeps were performed at a constant strain of 1% and frequencies between 0.1 and 100 rad/s. Time sweeps were determined at 37 °C with a 1% strain and at an angular frequency of 6.28 rad/s.
Mesenchymal stem cell culture
hMSCs (bone marrow-derived, Lonza) were cultured in DMEM-low glucose supplemented with 100 U/mL penicillin, 100 µg/mL streptomycin (DMEM/ps) and 10% fetal bovine serum (FBS) at 37 °C and 5% CO2. These MSCs are tested and certified to meet all criteria of and MSC as defined by the ISCT and are free from tested pathogens. All cultures were tested and confirmed free of mycoplasma every 3 months using a Mycoalert kit (Lonza). Prior to all experiments, cells were serum-starved overnight in DMEM/ps with 0.25% FBS. Cells were passaged at 80% confluency and seeded at a density of 2.5 × 103 cells/cm2 for subsequent passaging and cells were used up to passage 6. Inhibitors were added to cell cultures at the following concentrations: C3T (RhoA inhibitor, 1 µg/mL) and Rapamycin (mTOR inhibitor, 50 nM).
FRET biosensor analysis
One million hMSCs were transfected with 10 μg DNA using the 4D-Nucleofector™ System together with Human MSC Nucleofector® Kit (Lonza) on high-efficiency settings. Following nucleofection the cells were plated in DMEM/ps with 10% FBS overnight to recover before passaging onto PAM gels in DMEM/ps with 0.5% FBS. Images for analysis were collected on a LSM710 Zeiss confocal microscope equipped with a 40X water immersion objective (Zeiss, Jena, GER) using a heated stage at 37 °C with 5% CO2 atmosphere. CFP and FRET channels were recorded using a 458 nm laser line and collecting the emissions in the donor (BP 470e490 nm) and acceptor (BP 530e590 nm) emission regions, respectively. In addition, crosstalk and YFP channels were recorded using the 514 nm laser line for excitation and collecting the emission in the donor and acceptor emission regions. Images were acquired by sequential acquisition. For FRET measurements, a modified version of the FRET emission ratio was used to calculate this parameter on a pixel-by-pixel basis, as described previously14. The FRET index was calculated for every image as the average [FRET/Donor] emission ratio for selected regions of interest. Greater than 20 cells were tested per condition and repeated using multiple MSC donors.
Osteo:adipogenic differentiation switch assay
hMSCs were plated onto the appropriate substrate at 5 × 103 cells/cm2 and treated with mixed (1:1 adipogenic:osteogenic) inductive medium, with medium changes performed every 3 to 4 days. Adipogenic medium consisted of DMEM high-glucose with 10% FBS, 10 µg/mL insulin, 0.5 mM isobutyl-1-methylxanthine, 1 µg/mL dexamethasone and 0.2 mM indomethacin. Osteogenic medium consisted of DMEM low-glucose with 10% FBS, 50 µM ascorbate-2-phosphate, 100 ng/mL dexamethasone and 10 mM β-glycerophosphate.
At 14 days, differentiation was assessed via staining of ALP and Oil Red O (ORO) staining. To detect ALP activity, hMSCs were washed with PBS and incubated in 1 mg/mL Fast Blue and 0.2 mg/mL Napthol AS-MX Phosphate in 0.1 M Tris-HCl (pH 9.2) for 5 min at room temperature. Cells were then washed with PBS and fixed in 4% paraformaldehyde for 15 min. Subsequently, cells were stained using 0.5% ORO solution for 30 min. Images were obtained on a Nikon Eclipse Ti microscope equipped with Spot imaging software.
miRNA sequencing and analysis
RNA was isolated using the Qiagen miRNeasy mini kit (Cat #217004). DNA was removed from Total RNA using a Qiagen RNase-Free DNase Set (Cat #79254), and RNA was run on an Agilent Bioanalyser and Thermo Nanodrop for QC purposes. An aliquot of 1 µg of Total RNA was used as input into a NEBNext Small RNA Library Prep Set for Illumina Kit (Cat #E7330), as per the manufacturer’s instructions. Libraries were loaded onto 2% agarose and electrophoresed at 100 V for 60 min and stained in 1× SYBR Gold for 15 min at RT with agitation. Bands corresponding to ~147 bp marker were excised, purified using a QIAGEN gel extraction kit, and re-run on a bioanalyser to confirm purity. Libraries were sequenced on an Illumina MiSeq and counted with qmiR against miRBase (v20). Differential expression determined using EdgeR with filtering criteria that miRNAs had to be expressed in two out of the three donors at a level of 10 counts per million or more to be included in the analysis. miRNAs were considered differentially expressed when the log2 fold change between conditions was greater than or equal to 2, and the FDR controlled p-value was less than 0.05. Targetscan was used to generate lists of target mRNAs for each of these differentially expressed miRNAs and these genes were analysed for functional enrichment using Ingenuity Pathway Analysis software.
Quantitative real-time RT-PCR for miRNA
To isolate miRNA, total RNA was extracted using the Qiagen miRNeasy mini kit with on-column DNase treatment (Cat # 217004) according to the manufacturer’s instructions. cDNA was synthesised from 500 ng RNA using miScript II RT kit (Qiagen) in a total volume of 20 µl. Reverse transcription was performed in the Biorad T100 Thermal Cycler using the following cycling conditions: 60 min at 37 °C and 5 min at 95 °C. Quantitative PCR reactions for miRNA analysis were set-up in a total volume of 10 µL with miScript SYBR Green kit (Qiagen) and miScript primers (Qiagen). A CFX96 Real-Time System (Bio-Rad) was used to run the samples with cycling parameters of 15 min at 95 °C followed by 40 cycles of 15 s at 94 °C, 30 s at 55 °C and 30 s at 70 °C. The relative level of miRNA expression was calculated using the 2–ΔΔCt method with RNU6 as a reference.
Quantitative real-time RT-PCR for mRNA
To analyse mRNA, total RNA was extracted using the Qiagen RNeasy mini kit with on-column DNase treatment (Cat #74104) according to the manufacturer’s instructions. cDNA was synthesised from up to 750 ng RNA using Superscript VILO (Thermo Scientific) in a total volume of 20 µl. Reverse transcription was performed in the Biorad T100 Thermal Cycler using the following cycling conditions: 10 min at 25 °C, 60 min at 42 °C and 5 min at 85 °C. Quantitative PCR reactions were set-up in a total volume of 10 µL with 1× ABI Fast SYBR Green Mastermix and 0.2 µM forward and reverse primers. The primer sequences were listed in Supplementary Table 11. A CFX96 Real-Time System (Bio-Rad) was used to run the samples with fast cycling parameters of 20 s at 95 °C, 3 s at 95 °C and 30 s at 60 °C, which was repeated for 40 cycles and followed by a melt curve. Data were analysed by the 2–ΔΔCt method using RPS27a as a reference gene.
To up/downregulate miRNA activity, hMSCs were treated with either human mercury LNATM miRNA mimics and mimic negative control or human antisense mercury LNATM miRNA inhibitors and miRNA inhibitor control respectively (Exiqon). Details of the mimics and inhibitors are listed in Supplementary Table 12. Cells were transfected using Lipofectamine RNAiMAx transfection reagent (Thermo Scientific) and 10 or 25 nM of miRNA mimic, miRNA inhibitor or scrambled miRNA control were added. Following transfection with miRNA mimics and inhibitors, hMSCs were plated onto PAM gels for RNA/protein isolation or plated into soft and stiff PAM gels at a density of 5 × 103 cells/cm2 for differentiation analysis. For rapamycin experiments, MSC were treated with 50 nM rapamycin (Cayman Chemical) for the duration of the culture period.
mTOR (FRAP1) reporter assay
A FRAP1 (mTOR) reporter construct (HmiT006426 3′UTR, Genecopoeia™) was transiently transfected into 1 × 106 hMSCs (2 µg) using a 4D Nucleofector with associated Human MSC Nucleofector Kit (Lonza). Following transfection, cells were incubated under standard culture conditions for 12 hrs, re-distributed across a 96-well plate at a density of 4 × 103 cells/cm2 and incubated a further 12 h under standard culture conditions.
Selected miRNA and mimics and inhibitors of miR-100-5p were added to transfected hMSCs using the lipofectamine RNAiMAX system (Invitrogen) as above and incubated for 24 h and reporter gene activity measured using the Secrete-Pair™ Dual Luminescence Assay Kit (GeneCopoeia) on a CLARIOstar® microplate reader (BMG labtech). Results were calculated as the ratio of luciferase light units to secreted ALP.
Cell lysates were prepared in RIPA buffer, supplemented with 1% protease inhibitor cocktail (Roche). Lysates were subsequently combined with 5× Laemmli sample buffer and assessed through SDS-PAM gel electrophoresis (SDS-PAGE) and subsequent western blot analysis52,53. To ascertain complete separation for proteins of interest, pre-cast 4–12% gradient PAM gels (Thermo Scientific) were applied. Following electrophoresis, proteins were transferred to PVDF membrane under wet electro-transfer conditions using transfer buffer ([10%] ethanol, 25 mM Tris, 0.1% SDS and 190 mM glycine in H2O) maintained at 350 mA for 1 h (at 4 °C). Membranes were blocked in PBS and 5% skim milk powder at RT for 30 min and incubated overnight in primary antibody (diluted in blocking solution) at 4 °C; mTOR [1:1000] (Abcam ab87540), β-Tubulin [1:1000] (Sigma T8328), GAPDH [1:2000] (Millipore MAB374), LARP1 [1:3000] (Abcam ab86539), RICTOR [1:1000] (Abcam ab104838), RAPTOR [1:2000] (Abcam ab5454), Akt [1:1000] (Cell Signalling 4685S), Phosphorylated Akt [1:1000] (Cell Signalling 4058S). Membranes were incubated in secondary antibody for 1 h at RT; goat anti-rabbit conjugated POD [1:3000] (Abcam ab6721), goat anti-mouse conjugated POD [1:4000] (Abcam ab6728). Chemiluminescence signal was detected using Pierce ECL Plus solution (Thermo Fisher) and a UVITEC mini HD6 detector. Original western blot images are shown in Supplementary Fig. 8.
3D gelatin-PEG gels
hMSCs were transfected with miRNA mimics/inhibitors for 24 h prior to encapsulation in gelatin-PEG hydrogels24. Cells were harvested by TrypLE™ Express treatment, spun down and resuspended at a density of 1.25 × 104 cells/μL. Hydrogel stock solutions of 10% (w/v) GelNB (gelatin norbornene), 15% (w/v) PEG(SH)2 (poly(ethylene glycol) dithiol (Mn 2000 Da))and 5% (w/v) LAP (lithium phenyl-2,4,6-trimethylbenzoylphosphinate) photoinitiator were freshly prepared in sterile DPBS. GelNB stock solutions were incubated at 37 °C to ensure the solubility and homogenisation. Gel stock solutions (4% (w/v) GelNB, 1% (w/v) PEG(SH)2, 0.03% (w/v) LAP) and corresponding cell suspensions were combined to deliver the final 5% (w/v) hydrogel with hMSCs at 2.5 × 103 cells/μL. Triplicate drops (25 μL/drop) per condition were pipetted into a petri dish (Cellvis) and exposed to the visible light (400~500 nm, 10 mW/cm2) for 10 min. The cured hMSC-laden samples were rinsed thrice with 1.5 mL media and cultured in the osteogenic media for 14 days with media change every 3 days. To stain hydroxyapatite, gels were washed with PBS, fixed with 4% paraformaldehyde and incubated with Osteoimage (Lonza) as per the manufacturer’s instructions, followed by incubation in Hoechst to label cell nuclei. Fluorescence detection and 3D projections were obtained using a Zeiss LSM 780 confocal microscope and processed using Zen software. Image analysis was performed on multiple images per gel, normalising the intensity of the Osteoimage staining to Hoechst to account for any variability on cell number.
A Kolmogorov–Smirnov test was used to test data for Normal distribution and Levene’s test used to determine homogeneity of variance. Data with a Normal distribution were analysed by one-way ANOVA and Tukey (equal variance) or Games-Howell (unequal variance) post hoc tests. Non-parametric data were analysed by Kruskal–Wallis test. All statistical analysis was performed using SPSS v23.
The authors declare that all data supporting the findings of this study are available within the article and its Supplementary information files or from the corresponding author upon reasonable request.
Pittenger, M. F. Multilineage potential of adult human mesenchymal stem cells. Science 284, 143–147 (1999).
Ren, G. et al. Mesenchymal stem cell-mediated immunosuppression occurs via concerted action of chemokines and nitric oxide. Cell Stem Cell 2, 141–150 (2008).
Cameron, A. R., Frith, J. E. & Cooper-White, J. J. The influence of substrate creep on mesenchymal stem cell behaviour and phenotype. Biomaterials 32, 5979–5993 (2011).
Engler, A. J., Sen, S., Sweeney, H. L. & Discher, D. E. Matrix elasticity directs stem cell lineage specification. Cell 126, 677–689 (2006).
Fiedler, J. et al. The effect of substrate surface nanotopography on the behavior of multipotnent mesenchymal stromal cells and osteoblasts. Biomaterials 34, 8851–8859 (2013).
Salasznyk, R. M., Williams, W. A., Boskey, A., Batorsky, A. & Plopper, G. E. Adhesion to vitronectin and collagen i promotes osteogenic differentiation of human mesenchymal stem cells. J. Biomed. Biotechnol. 2004, 24–34 (2004).
Frith, J. E., Mills, R. J. & Cooper-White, J. J. Lateral spacing of adhesion peptides influences human mesenchymal stem cell behaviour. J. Cell Sci. 125, 317–327 (2012).
Rowlands, A. S., George, P. A. & Cooper-White, J. J. Directing osteogenic and myogenic differentiation of MSCs: interplay of stiffness and adhesive ligand presentation. Am. J. Physiol. Cell. Physiol. 295, C1037–C1044 (2008).
Winer, J. P. et al. Bone marrow-derived human mesenchymal stem cells become quiescent on soft substrates but remain responsive to chemical or mechanical stimuli. Tissue Eng. Part A 15, 147–154 (2009).
Critchley, D. R. Focal adhesions - the cytoskeletal connection. Curr. Opin. Cell. Biol. 12, 133–139 (2000).
McBeath, R., Pirone, D. M., Nelson, C. M., Bhadriraju, K. & Chen, C. S. Cell shape, cytoskeletal tension, and RhoA regulate stem cell lineage commitment. Dev. Cell. 6, 483–495 (2004).
Gao, L., McBeath, R. & Chen, C. S. Stem cell shape regulates a chondrogenic versus myogenic fate through rac1 and N-cadherin. Stem Cells 28, 564–572 (2010).
Onishi, M., Fujita, Y., Yoshikawa, H. & Yamashita, T. Inhibition of Rac1 promotes BMP-2-induced osteoblastic differentiation. Cell Death Dis. 4, e698 (2013).
Cameron, A. R., Frith, J. E., Gomez, G. A., Yap, A. S. & Cooper-White, J. J. The effect of time-dependent deformation of viscoelastic hydrogels on myogenic induction and Rac1 activity in mesenchymal stem cells. Biomaterials 35, 1857–1868 (2014).
Fabian, M. R., Sonenberg, N. & Filipowicz, W. Regulation of mRNA translation and stability by microRNAs. Annu. Rev. Biochem. 79, 351–379 (2010).
Ivey, K. N. & Srivastava, D. microRNAs as developmental regulators. Cold Spring Harb. Perspect. Biol. 7, a008144 (2015).
Bork, S. et al. Adipogenic differentiation of human mesenchymal stromal cells is down-regulated by microRNA-369-5p and up-regulated by microRNA-371. J. Cell Physiol. 226, 2226–2234 (2011).
Eguchi, T. et al. OstemiR: a novel panel of microRNA biomarkers in osteoblastic and osteocytic differentiation from mesencymal stem cells. PLoS ONE 8, e58796 (2013).
Guérit, D. et al. Sox9-regulated miRNA-574-3p inhibits chondrogenic differentiation of mesenchymal stem cells. PLoS ONE 8, e62582 (2013).
Schoolmeesters, A. et al. Functional profiling reveals critical role for miRNA in differentiation of human mesenchymal stem cells. PLoS ONE 4, e5605 (2009).
Eskildsen, T. et al. MicroRNA-138 regulates osteogenic differentiation of human stromal (mesenchymal) stem cells in vivo. Proc. Natl Acad. Sci. USA 108, 6139–6144 (2011).
Valastyan, S. & Weinberg, R. A. Roles for microRNAs in the regulation of cell adhesion molecules. J. Cell Sci. 124, 999–1006 (2011).
Liu, M., Bi, F., Zhou, X. & Zheng, Y. Rho GTPase regulation by miRNAs and covalent modifications. Trends Cell. Biol. 22, 365–373 (2012).
Li, F., Truong, V. X., Thissen, H., Frith, J. E. & Forsythe, J. S. Microfluidic encapsulation of human mesenchymal stem cells for articular cartilage tissue regeneration. ACS Appl. Mater. Interfaces 9, 8589–8601 (2017).
Guilluy, C., Garcia-Mata, R. & Burridge, K. Rho protein crosstalk: another social network? Trends Cell. Biol. 21, 718–726 (2011).
Wang, Y. et al. MicroRNAs in the regulation of interfacial behaviors of MSCs cultured on microgrooved surface pattern. Biomaterials 32, 9207–9217 (2011).
Li, C. X. et al. MicroRNA-21 preserves the fibrotic mechanical memory of mesenchymal stem cells. Nat. Mater. 16, 379–389 (2016).
Wei, F. L. et al. Mechanical force-induced specific microRNA expression in human periodontal ligament stem cells. Cells Tissues Organs 199, 353–363 (2014).
Iwawaki, Y. et al. MiR-494-3p induced by compressive force inhibits cell proliferation in MC3T3-E1 cells. J. Biosci. Bioeng. 120, 456–462 (2015).
Wang, S. C. et al. MicroRNA-122 triggers mesenchymal-epithelial transition and suppresses hepatocellular carcinoma cell motility and invasion by targeting RhoA. PLoS ONE 9, e101330 (2014).
Seeliger, C. et al. Five freely circulating miRNAs and bone tissue miRNAs are associated with osteoporotic fractures. J. Bone Miner. Res. 29, 1718–1728 (2014).
Tomé, M. et al. miR-335 orchestrates cell proliferation, migration and differentiation in human mesenchymal stem cells. Cell. Death Differ. 18, 985–995 (2011).
Wei, S. et al. HNF-4α regulated miR-122 contributes to development of gluconeogenesis and lipid metabolism disorders in Type 2 diabetic mice and in palmitate-treated HepG2 cells. Eur. J. Pharmacol. 791, 254–263 (2016).
Zhao, B., Shao, L., Wang, Q. & Li, M. MicroRNA-100 inhibits bone morphogenetic protein-induced osteoblast differentiation by targeting Smad1. Eur. Rev. Med. Pharmacol. Sci. 20, 3911–3919 (2016).
Zeng, Y. et al. MicroRNA-100 regulates osteogenic differentiation of human adipose-derived mesenchymal stem cells by targeting BMPR2. FEBS Lett. 586, 2375–2381 (2012).
Wang, Y. et al. Bone morphogenetic protein-2-induced signaling and osteogenesis is regulated by cell shape, RhoA/ROCK, and cytoskeletal tension. Stem Cells Dev. 21, 1176–1186 (2012).
Buxboim, A. et al. Coordinated increase of nuclear tension and lamin-A with matrix stiffness out-competes Lamin-B Receptor which favors soft tissue phenotypes. Mol. Biol. Cell. 28, 3333–3348 (2017).
Esau, C. et al. MicroRNA-143 regulates adipocyte differentiation. J. Biol. Chem. 279, 52361–52365 (2004).
Liu, Y. et al. Chronic high dose alcohol induces osteopenia via activation of mTOR signaling in bone marrow mesenchymal stem cells. Stem Cells 34, 2157–2168 (2016).
Jacinto, E. et al. Mammalian TOR complex 2 controls the actin cytoskeleton and is rapamycin insensitive. Nat. Cell. Biol. 6, 1122–1128 (2004).
Liu, L. et al. Rapamycin inhibits cytoskeleton reorganization and cell motility by suppressing RhoA expression and activity. J. Biol. Chem. 285, 38362–38373 (2010).
Li, C. et al. Multiple roles of MicroRNA-100 in human cancer and its therapeutic potential. Cell. Physiol. Biochem. 37, 2143–2159 (2015).
Sun, J. et al. MicroRNA-99a/100 promotes apoptosis by targeting mTOR in human esophageal squamous cell carcinoma. Med. Oncol. 30, 411 (2013).
Mu, S., Kang, B., Zeng, W., Sun, Y. & Yang, F. MicroRNA-143-3p inhibits hyperplastic scar formation by targeting connective tissue growth factor CTGF/CCN2 via the Akt/mTOR pathway. Mol. Cell. Biochem. 416, 99–108 (2016).
Chen, X. G. et al. Rapamycin regulates Akt and ERK phosphorylation through mTORC1 and mTORC2 signaling pathways. Mol. Carcinog. 49, 603–610 (2010).
Gharibi, B., Farzadi, S., Ghuman, M. & Hughes, F. J. Inhibition of Akt/mTOR attenuates age-relatedchanges in mesenchymal stem cells. Stem Cells 32, 2256–2266 (2014).
Martin, S. K. et al. Brief report: the differential roles of mTORC1 and mTORC2 in mesenchymal stem cell differentiation. Stem Cells 33, 1359–1365 (2015).
Isomoto, S. et al. Rapamycin as an inhibitor of osteogenic differentiation in bone marrow-derived mesenchymal stem cells. J. Orthop. Sci. 12, 83–88 (2007).
Martin, S. K. et al. NVP-BEZ235, a dual pan class I PI3 kinase and mTOR inhibitor, promotes osteogenic differentiation in human mesenchymal stromal cells. J. Bone Miner. Res. 25, 2126–2137 (2010).
Ogawa, T. et al. Osteoblastic differentiation is enhanced by rapamycin in rat osteoblast-like osteosarcoma (ROS 17/2.8) cells. Biochem. Biophys. Res. Commun. 249, 226–230 (1998).
Singha, U. K. et al. Rapamycin inhibits osteoblast proliferation and differentiation in MC3T3-E1 cells and primary mouse bone marrow stromal cells. J. Cell. Biochem. 103, 434–446 (2008).
Carthew, J. & Karakesisoglou, I. in The Nuclear Envelope: Methods and Protocols (ed. Shackleton, S.) 221–232 (Springer Science & Business Media, Heidelberg, 2016).
Towbin, H., Staehelin, T. & Gordon, J. Electrophoretic transfer of proteins from polyacrylamide gels to nitrocellulose sheets: procedure and some applications. Proc. Natl Acad. Sci. USA 76, 4350–4354 (1979).
This study was financially supported by the Australian Research Council (DE130100986, DP140104217 and SR110001002). We thank John Forsythe (Monash University) for his generous provision of materials for the gelatin-PEG light-activated hydrogels. This work was partly performed at the Australian National Fabrication Facility, a company established under the National Collaborative Research Infrastructure Strategy to provide nano- and microfabrication facilities for Australia’s researchers. The authors also acknowledge the facilities, scientific and technical assistance of Monash Micro Imaging, Monash University, Victoria, Australia.
The authors declare no competing financial interests.
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Frith, J.E., Kusuma, G.D., Carthew, J. et al. Mechanically-sensitive miRNAs bias human mesenchymal stem cell fate via mTOR signalling. Nat Commun 9, 257 (2018). https://doi.org/10.1038/s41467-017-02486-0
In situ miRNA delivery from a hydrogel promotes osteogenesis of encapsulated mesenchymal stromal cells
Acta Biomaterialia (2020)
Tissue Engineering Part B: Reviews (2020)
Mesenchymal Stem Cell-Specific and Preosteoblast-Specific Ablation of TSC1 in Mice Lead to Severe and Slight Spinal Dysplasia, Respectively
BioMed Research International (2020)
Mechanics-Controlled Dynamic Cell Niches Guided Osteogenic Differentiation of Stem Cells via Preserved Cellular Mechanical Memory
ACS Applied Materials & Interfaces (2020)
Journal of Cellular Physiology (2020)