Abstract
The mechanistic target of rapamycin complex 1 (mTORC1) plays a central role in regulating cell growth and metabolism by responding to cellular nutrient conditions. The activity of mTORC1 is controlled by Rag GTPases, which are anchored to lysosomes via Ragulator, a pentameric protein complex consisting of membrane-anchored p18/LAMTOR1 and two roadblock heterodimers. Here we report the crystal structure of Ragulator in complex with the roadblock domains of RagA-C, which helps to elucidate the molecular basis for the regulation of Rag GTPases. In the structure, p18 wraps around the three pairs of roadblock heterodimers to tandemly assemble them onto lysosomes. Cellular and in vitro analyses further demonstrate that p18 is required for Ragulator-Rag GTPase assembly and amino acid-dependent activation of mTORC1. These results establish p18 as a critical organizing scaffold for the Ragulator-Rag GTPase complex, which may provide a platform for nutrient sensing on lysosomes.
Similar content being viewed by others
Introduction
The mechanistic target of rapamycin complex 1 (mTORC1) serves as a master regulator of cell growth and metabolism by controlling biomaterial synthesis, lysosome biogenesis, and autophagy1,2,3 (Supplementary Fig. 1). mTORC1 is a multiprotein complex consisting of mTOR, RAPTOR, DEPTOR, PRAS40, and mLST84. mTOR is a highly conserved serine/threonine kinase that belongs to the family of phosphoinositide 3-kinase (PI3K)-related kinases and phosphorylates downstream substrates, such as S6 kinase, 4E-BP1, TFEB, and ULK1, to induce differential cellular responses depending upon nutrient conditions4. Dysregulation of critical components in the mTORC1 pathway is implicated in various human diseases such as cancer and diabetes-related complications. The mTORC1 pathway is therefore considered a promising therapeutic target for such diseases5,6.
The kinase activity of mTORC1 is regulated through multiple signals including nutrient amino acids, extracellular growth factors (e.g., insulin and insulin-like growth factors), and the intracellular energy status7,8,9,10,11. The sensing of nutrient amino acids by specific factors, such as SESTRIN2 and CASTOR1, leads to inactivation of GATOR1, a GTPase-activating protein (GAP) for Rag GTPase, resulting in the activation of Rag GTPase. Signals from other types of nutrient-sensing factors, such as LRS, FLCN-FNIP2, SLC38A9, and V-ATPase, also converge on Rag GTPase11. Activated Rag GTPase binds to mTORC1 and promotes its translocation to the surface of lysosomes12,13, whereupon mTORC1 is directly activated through interaction with another small GTPase, RHEB. The activity of RHEB is regulated by signals from growth factor receptors and by the cellular energy status. Activation of the PI3K-AKT pathway downstream of growth factor receptors induces inactivation of TSC1-2, a GAP for RHEB, leading to the activation of RHEB. By contrast, a decrease in cellular energy levels (i.e., a high AMP/ATP ratio) is sensed by AMP kinase14, which phosphorylates and activates TSC1-2 to suppress RHEB.
Rag GTPase is tethered to the surface of lysosomes via Ragulator15,16, a heteropentameric protein complex consisting of a membrane-anchored scaffold protein p18/LAMTOR117,18,19,20 and two heterodimers composed of roadblock domains21,22: p14-MP1/LAMTOR2-323,24 and p10-HBXIP/LAMTOR4-525. Rag GTPase is a heterodimeric complex formed by RagA/B and RagC/D, both of which consist of nucleotide-binding domains and roadblock domains21,26. Interaction between Ragulator and Rag GTPase is required for mTORC1 activation on lysosomes, and Ragulator has been proposed to act as a guanine nucleotide exchange factor (GEF) for Rag GTPase15,25,26. However, the molecular basis for the function and nutrient-dependent regulation of Ragulator and Rag GTPase remains elusive owing to a lack of structural information.
Herein, we present crystal structures of Ragulator and Ragulator in complex with the roadblock domains of RagA-C [RagA(RD)-C(RD)]. These structures reveal that p18 functions as a flexible scaffold by wrapping around the three pairs of roadblock heterodimers [i.e., p14-MP1, p10-HBXIP, and RagA(RD)-C(RD)] to tandemly assemble them via head-to-tail interactions. Cellular and in vitro reconstitution assays demonstrated that p18 is required for the functional assembly of the Ragulator-Rag GTPase complex and amino acid-dependent activation of mTORC1. These results suggest that the module built from the three roadblock heterodimers may serve as a platform for additional factors involved in the nutrient-dependent regulation of mTORC1 on lysosomes.
Results
The structure of Ragulator
We first analyzed the crystal structure of Ragulator, a heteropentameric protein complex. To enable its crystallization, we identified the minimum region of p18 essential for Ragulator formation. Immunofluorescence analysis showed that the C-terminal 120 amino acid residues of p18 (Ser42–Pro161) were required for the assembly of a functional Ragulator on lysosomes (Supplementary Fig. 2a, b). Thus, this p18 fragment was N-terminally His-tagged and coexpressed with other components of Ragulator in Escherichia coli (Supplementary Fig. 2c). The heteropentameric complex was purified by sequential column chromatography, followed by crystallization (Supplementary Fig. 2d). X-ray diffraction data were collected to 2.40 Å resolution, and the structure of Ragulator was determined by molecular replacement (Table 1 and Supplementary Fig. 3).
The overall structure of Ragulator revealed that the central region of p18 (Gln78–Ala150) wraps around two roadblock heterodimers: p14-MP1 and p10-HBXIP (Fig. 1a, b). Electron density for the N- and C-terminal regions (Ser42–Glu77 and Lys151–Pro161, respectively) was not visible, suggesting that these segments are flexible and disordered. These features of p18 indicate that it is an intrinsically disordered protein that adopts the observed structure by specifically interacting with the two heterodimers.
In the presence of roadblock domains, p18 adopts various secondary structural elements: it forms two long α-helices at the N- and C-terminal ends (helices α2 and α4, respectively), a short α-helix (α3), and a 310 helix in the middle loop (M-loop) between the α2 and α3 helices (Fig. 1a). The α2 helix (His79–Val94) mainly interacts with the hydrophobic groove of MP1, and the M-loop is elongated and also interacts with the hydrophobic groove formed by p10 and MP1 (Supplementary Fig. 4a). In particular, the side chains of Leu108 and Leu111 in the proline-rich region of the M-loop (Pro106, Pro107, and Pro109) are buried in the hydrophobic pocket of p10 (Supplementary Fig. 4a). The α3 helix (Pro115–Leu119) of p18 extensively interacts with the β-sheets of p10, and is supported by multiple hydrogen bonds and hydrophobic interactions (Fig. 1a, b and Supplementary Figs. 4a and 5a). Ser121 and Glu122 of p18 form hydrogen bonds with Arg65 and Arg89 of p10, creating an Arg bridge that forms further hydrogen bonds with Val118 and Leu119 of p18 (Supplementary Fig. 5a). The α4 helix (Phe126–Leu143) of p18 tightly interacts with HBXIP to assemble a stable trimer (p18-p10-HBXIP) that provides a platform for p14-MP1 (Fig. 1a). The binding interface between p18 and HBXIP is composed of hydrophobic interactions and hydrogen bonds between Asp128, Gln131, Ser133, and Ile135 of p18, and Lys88, Asn15, Gln77, and His8 of HBXIP, respectively (Supplementary Figs. 4a and 5b). The C-terminal region of p18 weakly interacts with helix α1 of p14 (Fig. 1a, b). Through these interactions, p18 appears to assemble the two roadblock heterodimers into a stable tetramer.
Assembly of p14-MP1 and p10-HBXIP heterodimers
The core region of Ragulator consists of two roadblock heterodimers, each with pseudo 2-fold symmetry, which are assembled tandemly in a head-to-tail orientation (Fig. 2a). HBXIP interacts with both p14 and MP1 (buried surface area [BSA] ~440 Å2 and ~360 Å2, respectively), while p10 contacts only with MP1 (BSA ~240 Å2; Fig. 2a and Supplementary Table 1). These BSAs are smaller than those between p14 and MP1, or between p10 and HBXIP (BSA ~1250 Å2 and ~830 Å2, respectively), suggesting that the interactions between the two heterodimers are weaker than those within each heterodimer, and indicating that wrapping by p18 is necessary to stabilize the interaction between the two heterodimers. The narrow binding interface between HBXIP and p14-MP1 is mediated by hydrogen bonds and by three salt bridges formed by Glu2, Asp39, and Lys54 of HBXIP with Arg80 and Lys107 of p14 and Glu17 of MP1 (Fig. 2b). These interactions may also contribute to the assembly of Ragulator.
The p10 subunit forms a heterodimer with HBXIP in essentially the same way as p14-MP127,28 (Fig. 2c, left). In the p10-HBXIP heterodimer, the α2 helices of each component interact in an antiparallel fashion, and the β3 strands form an antiparallel β-sheet. However, in contrast to the p14-MP1 heterodimer, both components lack helix α3 (Fig. 2c, right), thereby leaving a hydrophobic groove along the outer face of the β-sheet, which facilitates interaction with the α3 and α4 helices of p18 (Fig. 2d).
The structure of Ragulator-RagA-C roadblock domains
To elucidate the structural basis for the interaction between Ragulator and RagA-C, we next investigated which regions of RagA-C interact with Ragulator. For this, we coexpressed Ragulator with full-length RagA-C, the GTP-binding domains of RagA-C or the C-terminal roadblock dimers of RagA-C [RagA(RD)-C(RD)]. Pull-down assays with HisTrap beads revealed that RagA(RD)-C(RD) was sufficient to bind to Ragulator in vitro. Therefore, we used the full Ragulator along with RagA(RD)-C(RD) to determine the core structure of the Ragulator–RagA-C complex. All components of Ragulator and RagA(RD)-C(RD) were coexpressed in E. coli, and the purified heptameric complex was crystallized (Supplementary Fig. 2c, e). X-ray diffraction data were collected to 2.02-Å resolution, and the structure was determined by molecular replacement using structures of Ragulator and Gtr1p–Gtr2p29, a yeast ortholog of RagA-C (PDB: 4ARZ), as templates (Table 1 and Supplementary Fig. 6).
The overall structure of the Ragulator-RagA(RD)-C(RD) complex revealed that the N-terminal region of p18, which was disordered in the Ragulator structure, becomes ordered and clearly visible in the heptameric complex and forms a helix (α1: Glu50–Asn60), while the loop located between α1 and α2 remains disordered (Fig. 3a, b). The α1 helix interacts with the antiparallel pair of N- and C-terminal α helices of RagC(RD) through hydrophobic contacts (Supplementary Fig. 4b). This interaction is further stabilized by multiple hydrogen bonds between p18 (Ser63, Asn64, Ile65, Ile66, and Val68) and RagC (Asn252, Arg347, Tyr353, and Asn354) or MP1 (Lys62) (Supplementary Fig. 7a).
The C-terminal tail of p18 (Lys151–Pro161) is also visible, and is stabilized by hydrophobic contacts with p14 and RagA(RD) (Fig. 3a and c, Supplementary Fig. 4b). Furthermore, Glu152, Glu153, Leu154, and Val156 of p18 interact with Met1 and Arg3 of p14 through antiparallel β-strand-like interactions and the formation of multiple hydrogen bonds (Supplementary Fig. 7b). These interactions are observed only in the structure of Ragulator-RagA(RD)-C(RC), indicating a crucial role of the C-terminal tail of p18 for the assembly of Ragulator-RagA(RD)-C(RD).
The roadblock domains of RagA-C form a heterodimer with a pseudo 2-fold symmetry in a similar manner to that observed in the p14-MP1 and p10-HBXIP dimers. The binding mode between RagA(RD)-C(RD) and p14-MP1 is similar to that between p14-MP1 and p10-HBXIP: the β1–β2 loop between the β1 and β2 strands of p14 docks into the groove formed by the α3 helices of the roadblock domains of RagA-C (Fig. 3c and Supplementary Fig. 8). These structural features imply that the roadblock heterodimers might serve as a structural module that interacts with other related molecules via a conserved head-to-tail mode of interaction to bring about further multimerization.
These findings clearly demonstrate that p18 directly interacts with the RagA(RD)-C(RD) heterodimer via its N- and C-terminal regions through an induced fit mechanism to bind six roadblock proteins. Since p18 interacts with all other components of Ragulator and RagA(RD)-C(RD) (Supplementary Table 2) and most of the functional regions of p18 (Ser42–P161) are occupied in the final assembly (Fig. 3d and Supplementary Movie 1), it is likely that the primary function p18 is to stably anchor RagA-C onto Ragulator.
Structural comparison between the two complexes
To examine whether the binding of RagA(RD)-C(RD) affects the structure of Ragulator, the structure of the Ragulator-RagA(RD)-C(RD) complex was superimposed on that of Ragulator. Local conformational changes occur upon assembly, specifically at the α2 and α4 helices of p18 and the β2–α2 loop of p14 (Supplementary Fig. 9). In the β2–α2 loop of p14, the binding of RagA(RD)-C(RD) induces a conformational change in Arg43 and hydrogen bond formation with Ser280 of RagA, generating a new hydrogen bond with Tyr94 of p14 (Supplementary Fig. 9a). The α2 and α4 helices of p18 undergo positional and conformational shifts to fit tighter into the grooves formed by MP1 and HBXIP, respectively (Supplementary Fig. 9b, c). The α4 helix of p18 forms new π-stacking interactions with His8 of HBXIP, and new hydrogen bonds between Asp11 and Asp80 of HBXIP (Supplementary Fig. 9c). Nevertheless, the overall structures of p18 within Ragulator and Ragulator-RagA(RD)-C(RD) align well with each other and have a similar topology (Supplementary Fig. 9d). These observations indicate that the conformational flexibility of p18 allows it to specifically wrap the subunits of Ragulator and Rag GTPase into a functional complex through an induced fit mechanism.
p18 is essential for Ragulator-RagA-C assembly on lysosomes
To investigate the structure–function relationship between p18 and the Ragulator-Rag GTPase complex, we examined the effects of p18 mutations on the function of mTORC1 by reexpressing various p18 mutants (Supplementary Fig. 10) in p18 KO cells, which were established from p18 KO mouse embryos17. The function of mTORC1 was assessed by the punctate distribution of mTOR to perinuclear lysosomes (Supplementary Fig. 11). Among the mutations examined, multiple substitutions in the α2 and α4 helices (α2A and α4E) and deletion of the C-terminal 10–40 residues (CΔ10–40) caused a suppression of punctate lysosomal distribution of mTORC1. These observations suggest that these regions of p18 are important for the assembly of the Ragulator-Rag GTPase complex, which is required for mTORC1 activation on lysosomes.
To verify the roles of these regions, we conducted detailed analysis of CΔ5, CΔ10, CΔ15, α2A, and α4E mutants (Fig. 4a, b). Immunofluorescence analysis revealed that mTOR was delocalized from LAMP1-positive lysosomes in cells expressing CΔ10, CΔ15, and α4E mutants (critical mutant cells), although subpopulations were detectable at lysosomes in cells expressing CΔ5 and α2A mutants (moderate mutant cells) (Fig. 4c). Consistently, the activity of mTORC1 toward S6 kinase and TFEB was dramatically reduced in critical mutant cells, while moderate mutant cells retained substantial activity (Fig. 4d and Supplementary Fig. 12a).
We next examined the effects of p18 mutations on the nutrient-dependent activity of mTORC1 (Supplementary Fig. 13). Although insulin-dependent activation of S6 kinase phosphorylation was observed even in p18 KO cells, the levels of activation in critical mutant cells were almost comparable with those in p18 KO cells (Supplementary Fig. 13a). By contrast, amino acid-dependent S6 kinase phosphorylation was exclusively dependent on the presence of functional p18, and it was not activated in critical mutant cells or p18 KO cells, while moderate mutant cells showed some activation. Furthermore, TFEB phosphorylation, which was more strictly dependent on amino acids, even in WT cells, was not activated by amino acids in critical mutant cells. Time-course analyses of amino acid-dependent activities toward S6 kinase and TFEB confirmed that both activities were indeed activated in an amino acid-dependent manner, although phosphorylation of S6 kinase occurred transiently due to some negative feedback mechanisms (Supplementary Fig. 13b). These findings demonstrate that the C-terminal tail and α4 helix of p18 are crucial for amino acid-dependent activation of mTORC1.
The roles of the critical regions of p18 in the assembly of the Ragulator-Rag GTPase complex were confirmed by in vitro reconstitution analyses. Pull-down assays of recombinant proteins expressed in E. coli revealed that the C-terminal 10 residues (Glu152–Pro161) of p18 are dispensable for the assembly of Ragulator (Fig. 4e), but they are critical for stably anchoring RagA-C on Ragulator (Fig. 4f). The additional five residues at the C-terminus (Arg147–Lys151) are required for the binding of p14-MP1 (Fig. 4e). The α2 helix of p18 can contribute to the assembly of p14-MP1, and helix α4 is essential for the total assembly of Ragulator (Fig. 4e). These results demonstrate that the C-terminal tail and α2/α4 helices of p18 contribute to a stable assembly of the Ragulator-Rag GTPase complex.
We also analyzed the contribution of N-terminal regions of p18 to the regulation of mTORC1. Cellular and in vitro reconstitution analyses showed that the N-terminal 10 residues (His41–Glu50), which are disordered in the structure of the Ragulator-RagA(RD)-C(RD) complex, are dispensable for mTOR activation, while the following region (Gln51–Lys60) in the N-terminal α1 helix (Glu50–Asn64) is required for amino acid-dependent activation of mTORC1 (Fig. 5a–e and Supplementary Figs. 12b and 13a, b). These results indicate that, in addition to the C-terminal tail of p18, the N-terminal helix α1 is also crucial for stabilizing the interaction between RagA-C and Ragulator, which is required for amino acid-dependent activation of mTORC1. Taken together, the functional and structural information suggest that full assembly of the Ragulator-Rag GTPase complex via p18 is required to ensure the amino acid-dependent regulation of mTORC1 activity on lysosomes.
Discussion
In this study, we determined crystal structures of Ragulator and the Ragulator-RagA(RD)-C(RD) complex, which are composed of roadblock heterodimers wrapped in an orderly fashion by p18. During purification of Ragulator, we noticed the presence of a pre-Ragulator complex (p18-p10-HBXIP; Supplementary Fig. 2d). Furthermore, in vitro reconstitution assays in E. coli show that p18 is able to form a complex with p10-HBXIP alone, but p14-MP1 requires p10-HBXIP for complex formation with p18, and p18 is required for the assembly of p14-MP1 and p10-HBXIP (Supplementary Fig. 14). These findings suggest a stepwise assembly mechanism for Ragulator formation, in which p18 first specifically captures p10-HBXIP through multiple interactions with its middle region, including the M-loop, α3, and α4 helices, and then assembles p14-MP1 mainly via interactions between MP1 and the N-terminal α2 helix of p18, which is consistent with a previous report that the C-terminal region of p18 is not needed for interaction with p14-MP130. The assembled Ragulator then anchors Rag GTPases by clipping their roadblock domains with the C-terminal tail and α1 helix of p18 (Figs. 3d and 6a). Through this stepwise process, the Ragulator-Rag GTPase complex is precisely assembled on the surface of lysosomes.
To assess the complete structure of the Ragulator-RagA-C complex containing the GTP-binding domains, we superimposed the previously determined structure of the Gtr1p–Gtr2p complex29 onto that of human RagA(RD)-C(RD) in our structure (Fig. 6a). The superimposition suggests that the full Ragulator-RagA-C complex lying on the surface of the lysosomal membrane has its RAPTOR-binding region31 (RagA nucleotide-binding domain) located on the side of the molecule opposite to the lysosomal membrane (Fig. 6b). This orientation may be advantageous to capture mTORC1 via RAPTOR on the surface of the lysosomal membrane and allows close contact with RHEB, which directly activates mTORC1. The structure also reveals that the C-terminal tail of p18 does not reach the nucleotide-binding domain of RagA, and that the N-terminal domain does not interact with the nucleotide-binding domain of RagC (Fig. 6a). Furthermore, structural comparison between RagA(RD)-C(RD) and the roadblock domains of Gtr1p–Gtr2p indicates that the binding of Ragulator does not induce a dramatic conformational change in RagA(RD)-C(RD). These in vitro observations suggest that the binding of Ragulator may not directly affect the activity of RagA-C, although it is likely that Ragulator requires additional factors to regulate Rag GTPases in vivo.
Analysis of the structure–function relationship between p18 and the Ragulator-Rag GTPase complex suggests that the C-terminal tail and the N-terminal α1 helix of p18 are crucial for amino acid-dependent activation of mTORC1. Since these regions are required for holding RagA-C onto Ragulator, p18-mediated full assembly of the Ragulator-Rag GTPase complex may be a prerequisite for amino acid-dependent regulation of mTORC1. In this study, we also found that insulin-dependent activity of mTORC1 toward S6 kinase was retained to some extent even in p18 KO cells, while mTORC1 activity toward TFEB was largely dependent on amino acids and substantially attenuated by the loss of p18 function. These results underscore the crucial role of the Ragulator-Rag GTPase complex in amino acid-dependent regulation of mTORC1, and suggest that the insulin pathway might activate S6 kinase independently of the Ragulator-Rag GTPase complex on lysosomes.
In the structure of the Ragulator-RagA-C complex, the roadblock domains [α1–β1–β2–α2–β3–β4–β5–(α3)], which were originally identified in the Drosophila roadblock gene that encodes a dynein-associated protein22, are present in all components except p18. This domain is also shared in several small GTPase-related molecules and functions as a platform for small GTPase signaling21. Furthermore, our structure shows that the three pairs of roadblock domains assemble via head-to-tail interactions, forming a unique molecular surface that may facilitate further interactions with additional molecules that have related-modules, such as roadblock and/or longin domains21,32. Therefore, it is possible that p18 functions to create a platform for regulators of Rag GTPase, such as GEFs25 and GAPs (Fig. 6c). Since several known regulators of Rag GTPases, including GATOR133, FLCN34, and c17orf5735, contain longin-related domains, these factors may specifically interact with the Ragulator-Rag GTPase platform to regulate the activity of Rag GTPases on lysosomal membranes.
Recently, a crystal structure of the Ego1–Ego2–Ego3 ternary complex (Ego-TC), a yeast ortholog of Ragulator, was reported36. The Ego-TC structure differs from that of human Ragulator, consisting of a heterotrimer of Ego2, Ego3, and a C-terminal short region of Ego1 (Leu146–Phe184). However, the mode of interaction between Ego1 and Ego2-3 is somewhat similar to that between p18 and HBXIP-p14; the C-terminal α-helix and tail region of Ego1 and p18 interact with the surface of Ego2-3 and HBXIP-p14, respectively. Furthermore, the structure of Ego-TC was aligned with that of the p18-HBXIP-p14 complex in our structure with an overall root mean square deviation of 2.14 Å for all Cα atoms of across both components (Supplementary Fig. 15). Although the interaction sites between Ego-TC and Gtr1p–Gtr2p GTPases remain unknown, these findings suggest that the function of Ego1/p18 may be, at least in part, conserved during evolution. Since the Ego-TC complex was shown to be crucial for promoting Rag GTPase-dependent TORC1 signaling in yeast36, comparative analysis of the overall structures of the Ragulator-Rag GTPase complex in human beings and yeast will likely prove informative for understanding the basic mechanisms of its regulation.
During the review process of this paper, de Araujo et al. reported crystal structures of human Ragulator and Ragulator in complex with the roadblock domains of RagA-C37. The overall views of their structures are basically identical to ours, although there are some minor differences in the N- and C-terminus of each component and M-loop region of p18. Particularly, the critical interaction between RagA(RD) and the C-terminal tail of p18 is significantly perturbed in their structure, potentially due to extra amino acids at the N-terminus of p14 (Supplementary Table 3 and Supplementary Fig. 16). These structural features together with our data on the structure–function relationship underscore the crucial role of p18-mediated assembly of the Ragulator-Rag GTPase complex as a key regulatory platform for amino acid-dependent mTORC1 signaling. Identification of the critical regulatory sites on the surface of this complex may provide new chemotherapeutic targets for small molecules to treat human diseases, such as cancer and diabetes mellitus, which are associated with the dysregulation of mTORC1 signaling.
Methods
Expression and purification of Ragulator and RagA-C
To increase the solubility of the p18 protein in E. coli, substitution of Ser98 to Asp, which mimics the potential phosphorylation at this site, was introduced, although this substitution did not affect the function of Ragulator (Supplementary Figs. 2c and 11). The mutated cDNA fragment of the C-terminal region of human p18 (Ser42–Pro161) was cloned into the EcoRI-NotI sites of the pETDuet1 vector (Novagen), in which a tobacco etch virus (TEV) protease recognition site was introduced. PCR primers used in this study are listed in Supplementary Table 4. Full-length cDNAs of MP1 (Ala2–Ser124) and p14 (Met1–Ser125) were cloned into the NcoI-HindIII site and the NdeI-XhoI sites of the pACYCDuet1 vector (Novagen), respectively. The C-terminal half of HBXIP (Glu83–Ser173), which is a well-conserved short form, and the full-length cDNA of p10 (Met1–Val99) were cloned into the NcoI-HindIII site and the NdeI-XhoI sites of the pRSFDuet1 vector (Novagen), respectively. Expression vectors were simultaneously transfected into E. coli BL21(DE3) cells (Novagen), and the cells were cultured in the presence of the recommended amounts of ampicillin, kanamycin, and chloramphenicol in 2-l flasks at 37 °C. Protein expression was induced by 0.5 mM isopropyl-β-D-1-thiogalactoside (IPTG) at 30 °C for 1.5 h, and cells were collected by centrifugation and stored at −30 °C until needed. Cells were lysed in 50 ml of Lysis buffer consisting of 20 mM Tris-HCl (pH 8.0), 0.5 M NaCl, 40 mM imidazole, 0.2% Nonidet-P40 (NP-40), 1 mM phenylmethylsulfonyl fluoride (PMSF), and 1 mg/ml lysozyme. Lysates were sonicated five times for 1 min each time, and centrifuged at 30,000 × g for 10 min. Protein was purified from the cleared supernatant using a HisTrap HR column (5ml) with a linear gradient of 40–200 mM imidazole, followed by a Superdex 200 Increase 10/300GL column (GE Healthcare). Peak fractions containing the eluted protein were digested with Ac TEV protease (Invitrogen) at 4 °C for 7 h. After passing the TEV protease reaction through a HisTrap HR column, Ragulator was purified by MonoQ 10/100 GL column chromatography with a linear gradient of 0.1–0.35 M NaCl.
For expression of full-length human RagA and mouse RagC, the appropriate cDNAs were cloned into the BamHI-NotI sites and the BglII-XhoI sites of the pETDuet1 vector, respectively. The resultant constructs were transformed into E. coli BL21 (DE3) cells, and cells were cultured in the presence of ampicillin in 2-l flasks at 37 °C. Protein expression was induced by the addition of 0.5 mM IPTG, and culturing continued at 30 °C for 1.5 h. Cells were collected by centrifugation and lysed in the Lysis buffer consisting of 20 mM Tris-HCl (pH 8.0), 0.5 M NaCl, 40 mM imidazole, 0.2% NP-40, 5% glycerol, 5 mM MgCl2, 10 µM GTP/GDP, 4 mM β-mercaptoethanol, 1 mM PMSF, and 1 mg/ml lysozyme. Protein was purified from the cleared lysates using a HisTrap HR column (5 ml) followed by a Superdex 200 Increase 10/300GL column, and peak fractions containing the target protein were digested with Ac TEV protease at 4 °C for 7 h. After passing the reaction through a HisTrap column, the RagA/C complex was purified by HiTrap Q HR (5 ml) column chromatography with a linear gradient of 0.1–0.4 M NaCl. To form the heteroheptamer, purified Ragulator and RagA/C were mixed and subjected to gel filtration on a Superdex 200 increase 10/300GL column.
For coexpression of Ragulator with the roadblock domains (RD) of RagA-C, RagA(RD) consisting of residues Asn183–Arg313 and RagC(RD) consisting of residues Gln238–Ser375 were cloned into the BamHI-NotI sites and the NdeI-XhoI sites in the pETDuet1 vector, respectively, and the resulting BamH1-XhoI fragment was then cloned into the BglII-XhoI sites in the pETDuet1 vector harboring the p18 gene. The vector was transformed along with pACYCDuet1-MP1/p14 and pRSFDuet1-p10/HBXIP into E. coli BL21(DE3) cells, and cells were cultured in the presence of ampicillin, kanamycin, and chloramphenicol in 2-l flasks at 37 °C. Protein expression was induced by the addition of 0.5 mM IPTG, and culturing continued at 20 °C overnight. Cells were collected by centrifugation and lysed in 50 ml of Lysis buffer consisting of 20 mM Tris-HCl (pH 8.0), 0.5 M NaCl, 50 mM imidazole, 0.2% NP-40, 5% glycerol, 4 mM β-mercaptoethanol, 1 mM PMSF, and 1 mg/ml lysozyme. Protein was purified from cleared lysates using a HisTrap HR column (5 ml) with a linear gradient of 50–200 mM imidazole, followed by a Superdex 200 Increase 10/300GL column. Peak fractions containing the target protein were digested with Ac TEV protease at 4 °C for 7 h. After passing the TEV protease reaction through a HisTrap column, the Ragulator-RagA(RD)-C(RD) complex was purified by a second passage through the Superdex 200 Increase 10/300GL column.
Crystallization
Purified proteins were concentrated to ~10 mg/ml for Ragulator and ~12 mg/ml for the Ragulator-RagA(RD)-C(RD) complex, and crystallization screening was performed with a TTP Labtech Mosquito crystallization robot by sitting drop vapor diffusion at 20 °C. After optimization of the crystallization conditions, the best crystals were grown from 100 mM Tris-HCl (pH 9.0), 20 mM alcohol mix (2-propanol, 1,6-hexanediol, 1,4-butanediol, 1-butanol, and 1,3-propanediol), 13.75% PEG1000, 13.75% PEG3350, and 13.75% 2-methyl-2,4-pentanediol (MPD) for Ragulator, and 100 mM sodium citrate (pH 6.0), 200 mM ammonium acetate, and 15% PEG4000 for Ragulator-RagA(RD)-C(RD). Crystals were flash-frozen in liquid nitrogen after cryoprotection in mother liquor supplemented with 15% PEG1000, 15% PEG3350, and 15% MPD for Ragulator, and 30% glycerol for Ragulator-RagA(RD)-C(RD).
Data collection and structure determination
All diffraction data sets were collected on BL44XU38 at SPring-8, and indexed, integrated, and scaled using HKL200039, autoPROC40 with XDS41, AIMLESS42, and POINTLESS43. Structures were determined by molecular replacement using Phaser44 within the CCP4 suite45, with the previously reported crystal structures of p14-MP127 and HBXIP46 (PDB: 1VET and 3MSH, respectively) as templates for Ragulator, and the Ragulator and roadblock domains of Gtr1p-2p29 (PDB: 4ARZ) as templates for Ragulator-RagA(RD)-C(RD). All models were refined by Refmac547, PHENIX48, and BUSTER49, with manual revision using Coot50. Hydrophobicity was calculated according to the Eisenberg hydrophobicity scale51. X-ray diffraction and refinement statistics are summarized in Supplementary Table 1. Analysis of interacting interfaces was performed using PDBePISA52. All figures were made with the PyMOL Molecular Graphics System, Version 1.7 (Schrödinger, LLC).
Cell culture and transfection
p18 KO cells were established from p18 KO mouse embryos by immortalizing with SV40 large T antigen17, and cultured at 37°C in a humidified atmosphere containing 5% CO2 in Dulbecco’s Modified Eagle’s Medium (DMEM) supplemented with 10% (v/v) fetal bovine serum (FBS) and penicillin/streptomycin. Gene-transfer experiments were carried out using PiggyBac transposon vector system (System Biosciences). To analyze the amino acid- and insulin-dependent activity of mTORC1, semiconfluent cell cultures were washed with PBS and then incubated in DMEM (high glucose) with or without amino acids for 1 h. Insulin (10 μg/ml) was directly added to the medium. For time-course analyses, cultured cells were pretreated for 1 h with amino acid-free DMEM (high glucose), and were further incubated in DMEM (high glucose) with amino acids for each period.
Western blotting
Cells were lysed in ODG buffer (20 mM Tris-HCl, pH 7.4, 0.15 M NaCl, 1 mM EDTA, 1% NP-40, 2% octyl-β-D-glucoside, 5% glycerol, 1 mM Na3VO4, 10 mM NaF, and protease inhibitors). Equal amounts of total proteins were separated by SDS-PAGE and transferred onto polyvinylidene difluoride (PVDF) membranes. Membranes were blocked and incubated with primary antibodies, followed by incubation with HRP-conjugated secondary antibodies. Signals were visualized on a WSE6200H LuminoGraph II (ATTO, Tokyo, Japan). Representative blots obtained from at least three independent experiments are shown. For pull-down assays in E. coli, cell lysates expressing His-tagged p18 were incubated with HisTrap beads, and precipitates were subjected to Coomassie Brilliant Blue staining and western blotting. The following antibodies were used: anti-p18, anti-p14, anti-MP1, anti-HBXIP, anti-p10, anti-mTOR, and anti-phospho-S6K (Cell Signaling Technology), anti-actin, anti-LAMP1 and anti-S6K (Santa Cruz Biotechnology), and anti-TFEB (Bethyl Laboratories Inc). Catolog numbers and dilutions of these antibodies are listed in Supplementary Table 5. All experiments were repeated at least three times, and representative blots are displayed in all figures. Uncropped images of western blots are shown in Supplementary Figs. 17–20.
Immunofluorescence
Cells were cultured on coverslips and fixed with 1% paraformaldehyde in PBS at room temperature for 10 min. For detection of HBXIP, fixed specimens were incubated in methanol at room temperature for 10 min, and then treated with 50 μg/ml digitonin in PBS (digitonin-PBS) at room temperature for 10 min for permeabilization. After 1 h of blocking with Blocking-One (Nacalai Tesque, Kyoto, Japan), specimens were incubated with primary antibodies at room temperature for 3 h, washed three times with digitonin-PBS, incubated with Alexa488 or Alexa594-labeled secondary antibodies at room temperature for 1 h, and washed four times with digitonin-PBS. Finally, coverslips were immersed in ProLong Gold antifade reagent and mounted on glass slides. Specimens were then subjected to observation with a confocal laser-scanning microscope (FV1000, Olympus). All experiments were repeated at least three times and representative images are displayed in all figures.
Data availability
Coordinates and structure factors have been deposited in the Protein Data Bank under accession numbers 5X6U (Ragulator) and 5X6V (Ragulator-RagA[RD]-C[RD]). Other data are available from the corresponding authors upon reasonable request.
References
Dibble, C. C. & Manning, B. D. Signal integration by mTORC1 coordinates nutrient input with biosynthetic output. Nat. Cell Biol. 15, 555–564 (2013).
Bar-Peled, L. & Sabatini, D. M. Regulation of mTORC1 by amino acids. Trends Cell Biol. 24, 400–406 (2014).
Saxton, R. A. & Sabatini, D. M. mTOR signaling in growth, metabolism, and disease. Cell 168, 960–976 (2017).
Laplante, M. & Sabatini, D. M. Regulation of mTORC1 and its impact on gene expression at a glance. J. Cell Sci. 126, 1713–1719 (2013).
Kim, L. C., Cook, R. S. & Chen, J. mTORC1 and mTORC2 in cancer and the tumor microenvironment. Oncogene. 36, 2191–2201 (2016).
Ilagan, E. & Manning, B. D. Emerging role of mTOR in the response to cancer therapeutics. Trends Cancer 2, 241–251 (2016).
Chantranupong, L. et al. The CASTOR proteins are arginine sensors for the mTORC1 pathway. Cell 165, 153–164 (2016).
Wolfson, R. L. et al. Sestrin2 is a leucine sensor for the mTORC1 pathway. Science 351, 43–48 (2016).
Rebsamen, M. et al. SLC38A9 is a component of the lysosomal amino acid sensing machinery that controls mTORC1. Nature 519, 477–481 (2015).
Wang, S. et al. Metabolism. Lysosomal amino acid transporter SLC38A9 signals arginine sufficiency to mTORC1. Science 347, 188–194 (2015).
Goberdhan, D. C., Wilson, C. & Harris, A. L. Amino acid sensing by mTORC1: intracellular transporters mark the spot. Cell Metab. 23, 580–589 (2016).
Sancak, Y. et al. The rag GTPases bind raptor and mediate amino acid signaling to mTORC1. Science 320, 1496–1501 (2008).
Sancak, Y. & Sabatini, D. M. Rag proteins regulate amino-acid-induced mTORC1 signalling. Biochem. Soc. Trans. 37, 289–290 (2009).
Choo, A. Y. et al. Glucose addiction of TSC null cells is caused by failed mTORC1-dependent balancing of metabolic demand with supply. Mol. Cell 38, 487–499 (2010).
Sancak, Y. et al. Ragulator-Rag complex targets mTORC1 to the lysosomal surface and is necessary for its activation by amino acids. Cell 141, 290–303 (2010).
Dibble, C. C. & Cantley, L. C. Regulation of mTORC1 by PI3K signaling. Trends Cell Biol. 25, 545–555 (2015).
Nada, S. et al. The novel lipid raft adaptor p18 controls endosome dynamics by anchoring the MEK-ERK pathway to late endosomes. EMBO J. 28, 477–489 (2009).
Soma-Nagae, T. et al. The lysosomal signaling anchor p18/LAMTOR1 controls epidermal development by regulating lysosome-mediated catabolic processes. J. Cell Sci. 126, 3575–3584 (2013).
Nada, S., Mori, S., Takahashi, Y. & Okada, M. p18/LAMTOR1: a late endosome/lysosome-specific anchor protein for the mTORC1/MAPK signaling pathway. Methods Enzymol. 535, 249–263 (2014).
Kimura, T. et al. Polarization of M2 macrophages requires Lamtor1 that integrates cytokine and amino-acid signals. Nat. Commun. 7, 13130 (2016).
Levine, T. P. et al. Discovery of new Longin and Roadblock domains that form platforms for small GTPases in Ragulator and TRAPP-II. Small GTPases 4, 62–69 (2013).
Bowman, A. B. et al. Drosophila roadblock and Chlamydomonas LC7: a conserved family of dynein-associated proteins involved in axonal transport, flagellar motility, and mitosis. J. Cell Biol. 146, 165–180 (1999).
Teis, D. et al. p14-MP1-MEK1 signaling regulates endosomal traffic and cellular proliferation during tissue homeostasis. J. Cell Biol. 175, 861–868 (2006).
Wunderlich, W. et al. A novel 14-kilodalton protein interacts with the mitogen-activated protein kinase scaffold mp1 on a late endosomal/lysosomal compartment. J. Cell Biol. 152, 765–776 (2001).
Bar-Peled, L., Schweitzer, L. D., Zoncu, R. & Sabatini, D. M. Ragulator is a GEF for the rag GTPases that signal amino acid levels to mTORC1. Cell 150, 1196–1208 (2012).
Powis, K. & De Virgilio, C. Conserved regulators of Rag GTPases orchestrate amino acid-dependent TORC1 signaling. Cell Discov. 2, 15049 (2016).
Kurzbauer, R. et al. Crystal structure of the p14/MP1 scaffolding complex: how a twin couple attaches mitogen-activated protein kinase signaling to late endosomes. Proc. Natl Acad. Sci. USA 101, 10984–10989 (2004).
Lunin, V. V. et al. The structure of the MAPK scaffold, MP1, bound to its partner, p14. A complex with a critical role in endosomal map kinase signaling. J. Biol. Chem. 279, 23422–23430 (2004).
Jeong, J. H. et al. Crystal structure of the Gtr1p(GTP)-Gtr2p(GDP) protein complex reveals large structural rearrangements triggered by GTP-to-GDP conversion. J. Biol. Chem. 287, 29648–29653 (2012).
Magee, J. & Cygler, M. Interactions between kinase scaffold MP1/p14 and its endosomal anchoring protein p18. Biochemistry 50, 3696–3705 (2011).
Gong, R. et al. Crystal structure of the Gtr1p-Gtr2p complex reveals new insights into the amino acid-induced TORC1 activation. Genes Dev. 25, 1668–1673 (2011).
Dokudovskaya, S. & Rout, M. P. SEA you later alli-GATOR--a dynamic regulator of the TORC1 stress response pathway. J. Cell Sci. 128, 2219–2228 (2015).
Bar-Peled, L. et al. A Tumor suppressor complex with GAP activity for the Rag GTPases that signal amino acid sufficiency to mTORC1. Science 340, 1100–1106 (2013).
Tsun, Z. Y. et al. The folliculin tumor suppressor is a GAP for the RagC/D GTPases that signal amino acid levels to mTORC1. Mol. Cell 52, 495–505 (2013).
Schweitzer, L. D., Comb, W. C., Bar-Peled, L. & Sabatini, D. M. Disruption of the rag-ragulator complex by c17orf59 inhibits mTORC1. Cell Rep. 12, 1445–1455 (2015).
Powis, K. et al. Crystal structure of the Ego1-Ego2-Ego3 complex and its role in promoting Rag GTPase-dependent TORC1 signaling. Cell Res. 25, 1043–1059 (2015).
de Araujo, M. E. G. et al. Crystal structure of the human lysosomal mTORC1 scaffold complex and its impact on signaling. Science. 358, 377–381 (2017).
Higashiura, A. et al. SPring-8 BL44XU, beamline designed for structure analysis of large biological macromolecular assemblies. AIP Conf. Proc. 1741, 030028 (2016).
Otwinowski, Z. & Minor, W. Processing of X-ray diffraction data collected in oscillation mode. Methods Enzymol. 276, 307–326 (1997).
Vonrhein, C. et al. Data processing and analysis with the autoPROC toolbox. Acta. Crystallogr. D Biol. Crystallogr. 67, 293–302 (2011).
Kabsch, W. Xds. Acta. Crystallogr. D Biol. Crystallogr. 66, 125–132 (2010).
Evans, P. R. & Murshudov, G. N. How good are my data and what is the resolution? Acta. Crystallogr. D Biol. Crystallogr. 69, 1204–1214 (2013).
Evans, P. R. An introduction to data reduction: space-group determination, scaling and intensity statistics. Acta. Crystallogr. D Biol. Crystallogr. 67, 282–292 (2011).
McCoy, A. J. et al. Phaser crystallographic software. J. Appl. Crystallogr. 40, 658–674 (2007).
Winn, M. D. et al. Overview of the CCP4 suite and current developments. Acta. Crystallogr. D Biol. Crystallogr. 67, 235–242 (2011).
Garcia-Saez, I., Lacroix, F. B., Blot, D., Gabel, F. & Skoufias, D. A. Structural characterization of HBXIP: the protein that interacts with the anti-apoptotic protein survivin and the oncogenic viral protein HBx. J. Mol. Biol. 405, 331–340 (2011).
Murshudov, G. N. et al. REFMAC5 for the refinement of macromolecular crystal structures. Acta. Crystallogr. D Biol. Crystallogr. 67, 355–367 (2011).
Adams, P. D. et al. PHENIX: a comprehensive Python-based system for macromolecular structure solution. Acta. Crystallogr. D Biol. Crystallogr. 66, 213–221 (2010).
Bricogne, G. et al. BUSTER version 2.10.3 (Cambridge, United Kingdom: Global Phasing Ltd., 2016).
Emsley, P., Lohkamp, B., Scott, W. G. & Cowtan, K. Features and development of Coot. Acta. Crystallogr. D Biol. Crystallogr. 66, 486–501 (2010).
Eisenberg, D., Schwarz, E., Komaromy, M. & Wall, R. Analysis of membrane and surface protein sequences with the hydrophobic moment plot. J. Mol. Biol. 179, 125–142 (1984).
Krissinel, E. & Henrick, K. Inference of macromolecular assemblies from crystalline state. J. Mol. Biol. 372, 774–797 (2007).
Acknowledgements
We thank all members of the Nakagawa and Okada laboratories for their helpful suggestions and comments. This work was supported by JSPS KAKENHI Grant Numbers 15H04296, 26640078, 26114006, 17H06004, and 17K19596, and partially by the Platform Project for Supporting Drug Discovery and Life Science Research (Platform for Drug Discovery, Informatics, and Structural Life Science) from the Ministry of Education, Culture, Sports, Science and Technology (MEXT) and the Japan Agency for Medical Research and Development (AMED). This work was performed using a synchrotron beamline BL44XU at SPring-8 under the Cooperative Research Program of the Institute for Protein Research, Osaka University. Diffraction data were collected at Osaka University beamline BL44XU at SPring-8 (Harima, Japan) under proposal numbers 2015A6500, 2015B6500, 2016A6500, and 2016B6500.
Author information
Authors and Affiliations
Contributions
T.N., R.Y., S.N. and M.O. designed the research. S.N. and A.K. generated cell lines and performed cell biology work. T.N. and M.N. purified proteins. R.Y. also performed crystallization and analyzed X-ray diffraction data. E.Y. assisted in data collection and processing of X-ray diffraction data. R.Y. and A.N. solved the crystal structures. H.N., K.N., S.L. and D.M.S. provided useful information. R.Y., A.O. and M.O. prepared the manuscript. A.N. and M.O. supervised the project.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Additional information
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Yonehara, R., Nada, S., Nakai, T. et al. Structural basis for the assembly of the Ragulator-Rag GTPase complex. Nat Commun 8, 1625 (2017). https://doi.org/10.1038/s41467-017-01762-3
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-017-01762-3
This article is cited by
-
Chemoproteomic development of SLC15A4 inhibitors with anti-inflammatory activity
Nature Chemical Biology (2024)
-
The Ragulator complex: delving its multifunctional impact on metabolism and beyond
Inflammation and Regeneration (2023)
-
The lysosomal Ragulator complex plays an essential role in leukocyte trafficking by activating myosin II
Nature Communications (2021)
-
Amino acid-dependent control of mTORC1 signaling: a variety of regulatory modes
Journal of Biomedical Science (2020)
-
p27 controls Ragulator and mTOR activity in amino acid-deprived cells to regulate the autophagy–lysosomal pathway and coordinate cell cycle and cell growth
Nature Cell Biology (2020)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.