Abstract
Nonreciprocal circuit elements form an integral part of modern measurement and communication systems. Mathematically they require breaking of timereversal symmetry, typically achieved using magnetic materials and more recently using the quantum Hall effect, parametric permittivity modulation or Josephson nonlinearities. Here we demonstrate an onchip magneticfree circulator based on reservoirengineered electromechanic interactions. Directional circulation is achieved with controlled phasesensitive interference of six distinct electromechanical signal conversion paths. The presented circulator is compact, its silicononinsulator platform is compatible with both superconducting qubits and silicon photonics, and its noise performance is close to the quantum limit. With a high dynamic range, a tunable bandwidth of up to 30 MHz and an in situ reconfigurability as beam splitter or wavelength converter, it could pave the way for superconducting qubit processors with multiplexed onchip signal processing and readout.
Introduction
Nonreciprocal devices are quintessential tools to suppress spurious modes, interferences and unwanted signal paths^{1}. More generally, circulators can be used to realize chiral networks^{2} in systems where directional matterlight coupling is not easily accessible. In circuit quantum electrodynamics^{3} circulators are used for singleport coupling or as isolators to protect the vulnerable cavity and qubit states from electromagnetic noise and strong parametric amplifier drive tones. Stateoftheart passive microwave circulators are based on magnetooptic effects that require sizable magnetic fields^{4,5}, incompatible with ultralow loss superconducting circuits. Due to the design principle their size is at least on the order of the wavelength and during manufacturing they need to be tuned and optimized one by one. Commercial circulators can therefore not be integrated onchip causing additional losses and forming a major roadblock towards a fully integrated quantum processor based on superconducting qubits.
Many recent theoretical and experimental efforts have been devoted to overcome these limitations both in the optical^{6,7,8} and microwave regimes^{9,10,11,12,13,14,15,16,17,18}. In parallel, the rapidly growing field of optomechanical and electromechanical systems has shown promising potential for applications in quantum information processing and communication, in particular for microwave to optical conversion^{19,20} and amplification^{21}. Very recently, several theoretical proposals^{22,23,24} have pointed out that reservoirengineered optomechanical systems^{25} can lead to nonreciprocity and first isolators have just been demonstrated in the optical domain^{26,27,28}.
Here we present an onchip microwave circulator using a frequency tuneable silicononinsulator electromechanical system^{29} that is compatible with superconducting qubits^{30}. The device can be reconfigured in situ as a filter, splitter, mixer, isolator or circulator. For the first mechanically mediated microwave circulator, we achieve an isolation of up to 24–38 dB, compared to total losses of 4.7–8.5 dB and at most 4–7 added noise quanta over an instantaneous bandwidth of 630 Hz.
Results
Device characterization and tunability
The main elements of the microchip circulator device are shown in Fig. 1a, b. The circuit comprises three highimpedance spiral inductors (L _{i}) capacitively coupled to the inplane vibrational modes of a dielectric nanostring mechanical resonator. The nanostring oscillator consists of two thin silicon beams that are connected by two symmetric tethers and fabricated from a high resistivity silicononinsulator device layer^{29}. Four aluminium electrodes are aligned and evaporated on top of the two nanostrings, forming one half of the vacuum gap capacitors that are coupled to three microwave resonators and one DC voltage bias line as shown schematically in Fig. 1c (see Supplementary Tables 1 and 2 for details). The device is mounted on the mixing chamber plate of a cryogenfree dilution refrigerator at a temperature of T _{f} = 10 mK and all incoming lines are strongly filtered and attenuated to suppress Johnson and phase noises.
The voltage bias line can be used to generate an attractive force that pulls the nanobeam and tunes the operating point frequencies of the device^{31}. Figure 1d shows the measured resonance frequency change as a function of the applied bias voltage V _{dc}. As expected, resonators 1 and 3 are tuned to higher frequency due to an increased vacuum gap, whereas resonator 2 is tuned to lower frequency. At a large tunable bandwidth of up to 30 MHz, as obtained for resonator 2, the ability to excite the motion directly and to modulate the electromechanical coupling in situ represents an important step towards new optomechanical experiments and more practicable onchip reciprocal and nonreciprocal devices.
As a first step, we carefully calibrate and characterize the individual electromechanical couplings and noise properties, similar to ref. ^{32}. The measured thermalization temperature of the two mechanical modes are 18 and 25 mK and the final occupancy for the reported device reached as low as 0.6 and 2 quanta for standard motional sideband cooling. We then measure the bidirectional frequency conversion between two microwave resonator modes as mediated by one mechanical mode^{33}. The incoming signal photons can also be distributed to two ports with varying probability as a function of the parametric drive strength and in direct analogy to a tunable beam splitter. We present the relevant sample parameters in Supplementary Tables 1 and 2, the theoretical analysis in Supplementary Note 2 and experimental results of this bidirectional frequency conversion process in Supplementary Fig. 1.
Theoretical model
Directionality is achieved by engaging the second mechanical mode, a method that was developed in parallel to this work^{34,35} for demonstrating nonreciprocity in singleport electromechanical systems. In fact, creating a parametric coupling between the two electromagnetic and the two mechanical modes by four microwave pumps with frequencies slightly detuned from the lower motional sidebands of the resonances, creates two paths for exchanging photons, as shown in Fig. 2a. Nonreciprocity appears when these paths interfere destructively, leading to breaking the symmetry between the two directions. For a detailed description, we begin with the theoretical model describing two microwave cavities with resonance frequencies ω _{ i } and total linewidths κ _{ i } with i = 1, 2 parametrically coupled to two distinct modes of a mechanical resonator with resonance frequencies ω _{ m,j } and damping rates γ _{ m,j } with j = 1, 2. To establish the parametric coupling, we apply four microwave tones, with frequencies detuned by δj from the lower motional sidebands of the resonances, as shown in Fig. 2a. In a reference frame rotating at the frequencies ω _{ i } and ω _{ m,j } + δj, the linearized Hamiltonian in the resolved sideband regime (ω _{ m,j } \( \gg \) κ _{1}, κ _{2}) is given by (ħ = 1)
where a _{ i }(b _{ j }) is the annihilation operator for the cavity i (mechanics j), \(G_{ij} = g_{0,{ij}}{\sqrt{n_{ij}}}\) and g _{0ij} are the effective and vacuum electromechanical coupling rates between the mechanical mode j and cavity i, respectively, while n _{ ij } is the total number of photons inside the cavity i due to the drive with detuning Δ_{ ij }, and ϕ _{ ij } is the relative phase set by drives. Here, Δ_{11} = Δ_{21} = ω _{ m,1} + δ _{1} and Δ_{22} = Δ_{12} = ω _{ m,2} + δ _{2} are the detunings of the drive tones with respect to the cavities and H _{off} describes the timedependent coupling of the mechanical modes to the cavity fields due to the offresonant drive tones. These additional coupling terms create crossdamping^{36} and renormalize the mechanical modes, and can only be neglected in the weak coupling regime for \({G_{ij}},{\kappa _j} \ll {\omega _{m,j}},\left {{\omega _{m,2}}  {\omega _{m,1}}} \right\).
To see how the nonreciprocity arises, we use the quantum Langevin equations of motion along with the input–output theorem to express the scattering matrix S _{ ij } of the system described by the Hamiltonian (1), and relating the input photons a _{in,i }(ω _{ i }) at port i to the output photons a _{out,j }(ω _{ j }) at port j via \({a_{{\rm{out}},i}} = \mathop {\sum}\nolimits_{j = 1,2} {{S_{ij}}{a_{{\rm{in}},i}}} \) with i = 1, 2. The dynamics of the fourmode system described by Hamiltonian (1) is fully captured by a set of linear equations of motion as verified in Supplementary Notes 3–6. Solving these equations in the frequency domain, using the input–output relations, and setting ϕ _{22} = ϕ, ϕ _{11} = ϕ _{21} = ϕ _{12} = 0, the ratio of backward to forward transmission reads
Here, Σ_{ m,j } = 1 + 2i[(−1)^{j} δ − ω]/γ _{ m,j } is the inverse of the mechanical susceptibility divided by the mechanical linewidth γ _{ m,j } and \({C_{ij}} = 4G_{ij}^2/({\kappa _i}{\gamma _{m,j}})\) is the electromechanical cooperativity. Note that, in Eq. (2) we assume the device satisfies the impedancematching condition on resonance, i.e., S _{ ii }(ω = 0) = 0, which can be achieved in the highcooperativity limit (\({C_{ij}} \gg 1\)).
Inspection of Eq. (2) reveals the crucial role of the relative phase between the drive tones ϕ and the detuning δ to obtain nonreciprocal transmission. When the cooperativities for all four electromechanical couplings are equal (\({C_{ij}} = {\cal C}\)) then perfect isolation, i.e. λ = 0, occurs for
Equation (3) shows that on resonance (ω = 0) tan[ϕ] \( \propto \) δ, highlighting the importance of the detuning δ to obtain nonreciprocity. Tuning all four drives to the exact red sideband frequencies (δ = 0) results in bidirectional behaviour (λ = 1). At the optimum phase ϕ given by Eq. (3), ω = 0, and for two mechanical modes with identical decay rates (γ _{ m,1} = γ _{ m,2} = γ) the transmission in forward direction is given by
where η _{1(2)} = κ _{ext,1(2)}/κ _{1(2)} is the resonator coupling ratio and κ _{ i } = κ _{int,i } + κ _{ext,i } is the total damping rate. Here κ _{int,i } denotes the internal loss rate and κ _{ext,i } the loss rate due to the cavity to waveguide coupling. Equation (4) shows that the maximum of the transmission in forward direction, \({\left {{S_{21}}} \right^2} = {\eta _1}{\eta _2}\left[ {1  {{(2{\cal C})}^{  1}}} \right]\), occurs when \(2{\cal C} = 1 + 4{\delta ^2}/{\gamma ^2}\) and for large cooperativities \({\cal C} \gg 1\). These conditions, as implemented in our experiment, enable the observation of asymmetric frequency conversion with strong isolation in the backward direction and small insertion loss in forward direction.
Bidirectional wavelength conversion
For bidirectional wavelength conversion, higher cooperativity enhances the bandwidth, as shown in Supplementary Note 2. In contrast, the bandwidth of the nonreciprocal conversion is independent of cooperativity and set only by the intrinsic mechanical linewidths γ _{ m,i }, which can be seen in Eq. (2). This highlights the fact that the isolation appears when the entire signal energy is dissipated in the mechanical environment, a lossy bath that can be engineered effectively^{25}. In the present case it is the offresonant coupling between the resonators and the mechanical oscillator that modifies this bath. The applied drives create an effective interaction between the mechanical modes, where one mode acts as a reservoir for the other and vice versa. This changes both the damping rates and the eigenfrequencies of the mechanical modes.
It, therefore, increases the instantaneous bandwidth of the conversion and automatically introduces the needed detuning, which is fully taken into account in the theory.
Twoport microwave isolator
Using the onchip electromechanical microwave circuit shown in Fig. 1a, we experimentally realize directional wavelength conversion between two superconducting coil resonators at (ω _{1},ω _{2})/2π = (9.55, 9.82) GHz coupled to two different physical waveguide ports and measurement lines with (η _{1}, η _{2}) = (0.74, 0.86). Here we use the two lowestfrequency vibrational inplane modes of the mechanical resonator at (ω _{ m,1}, ω _{ m,2})/2π = (4.34, 5.64) MHz with intrinsic damping rates (γ _{ m,1}, γ _{ m,2})/2π = (4, 8) Hz. The vacuum electromechanical coupling strengths for these mode combinations are (g _{0,11}, g _{0,12}, g _{0,21}, g _{0,22})/2π = (33, 34, 13, 31) Hz. The microwave resonators are driven with four coherent microwave sources with powers (P _{11}, P _{12}, P _{21}, P _{22}) = (−73.3, −68.7, −66.9, −67.4) dBm at the device inputs that correspond to the single cavity–single mechanical cooperativities (C _{11}, C _{12}, C _{21}, C _{22}) = (47, 43.8, 41.9, 56.9). Transmission parameters are measured by using a weak probe signal with a signal power of only −117 dBm at the device inputs.
Figure 2b shows the measured transmission of the wavelength conversion in the forward S _{21}^{2} and backward directions S _{12}^{2} as a function of probe detuning for two different phases as set by one out of the four phaselocked microwave drives. At ϕ = −102.6º and over a bandwidth of 518 Hz, we measure high transmission from cavity 1 to 2 with an insertion loss of 2.4 dB due to finite input matching and a resonator loss of 1.9 dB due to finite intrinsic resonator linewidths. In the backward direction, the transmission is suppressed by up to 40.4 dB. Likewise, at the positive phase of ϕ = 102.6º the transmission from cavity 1 to 2 is suppressed while the transmission from cavity 2 to 1 is high. In both cases, we observe excellent agreement with theory (solid lines). Figure 2c shows the S parameters for the whole range of phases ϕ, which are symmetric and bidirectional around ϕ = 0. We find excellent agreement with theory over the full range of measured phases with <10% deviation to independently calibrated drive photon numbers and without any other free parameters.
Extension to a microwave circulator
The described twoport isolator can be extended to an effective threeport device by parametrically coupling the third microwave resonator capacitively to the dielectric nanostring, as shown in Fig. 1a. The third resonator at a resonance frequency of ω _{3}/2π = 11.30 GHz is coupled to the waveguide with η _{3} = 0.52 and to the two inplane mechanical modes with (g _{0,31}, g _{0,32})/2π = (22, 45) Hz. Similar to the isolator, we establish a parametric coupling between cavity and mechanical modes using six microwave pumps with frequencies slightly detuned from the lower motional sidebands of the resonances, which for certain pump phase combinations can operate as a threeport circulator for microwave photons, see Fig. 3a. The pump powers at the device inputs are (P _{11}, P _{12}, P _{21}, P _{22}, P _{31}, P _{32}) = (−72.5, −69, −67.5, −68, −69, −70) corresponding to the single resonator cooperativities (C _{11}, C _{12}, C _{21}, C _{22}, C _{31}, C _{32}) = (56.5, 40.9, 35, 49.6, 99.2, 49, 6). Using an additional microwave source as a weak probe signal with a signal power of only −117 dBm at the device inputs, we measure the power transmission between all ports and directions as shown in Fig. 3b for a single fixed phase of ϕ = −54º, optimized experimentally for forward circulation.
At this phase, we see high transmission in the forward direction S _{21,32,13} with an insertion loss of (3.8, 3.8, 4.4) dB, due to imperfect input matching, and an isolation in the backward direction S _{12,23,31} of up to (18.5, 23, 23) dB over a bandwidth of 628.5 Hz. The full dependence of the circulator scattering parameters on the drive phase is shown in Fig. 3c, where we see excellent agreement with theory. The added noise photon number of the device is found to be (n _{add,21}, n _{add,32}, n _{add,13}) = (4, 6.5, 3.6) in the forward direction and (n _{add,12}, n _{add,23}, n _{add,31}) = (4, 4, 5.5) in the backward direction, limited by the thermal occupation of the mechanical modes and discussed in more detail in Supplementary Fig. 3.
Discussion
In conclusion, we demonstrated a frequency tunable and in situ reconfigurable signal processing device that can act as a filter, wavelength converter, beam splitter, isolator or circulator for microwave photons. The circulator is highly directional and operates with relatively low loss and added noise. Improvements of the circuit design and fabrication will help to increase the instantaneous bandwidth and decrease the insertion losses. Compared to the so far significantly higher bandwidth Josephson devices, a mechanical approach is insensitive to magnetic field noise and offsets, mechanical devices have higher dynamical range due to the smaller nonlinearity, and wellconfined mechanical modes are typically less prone to parasitic coupling when integrated in larger systems. In addition, mechanical systems have the potential for hybrid microwave and optical signal processing, in particular for nonreciprocity between microwave and optical propagating fields. The presented external voltage bias offers new ways to achieve directional amplification and squeezing of microwave fields in the near future.
Data availability
The data that support the findings of this study are available from the corresponding author upon reasonable request.
References
 1.
Jalas, D. et al. What is – and what is not – an optical isolator. Nat. Photon. 7, 579–582 (2013).
 2.
Lodahl, P. et al. Chiral quantum optics. Nature 541, 473–480 (2017).
 3.
Wallraff, A. et al. Strong coupling of a single photon to a superconducting qubit using circuit quantum electrodynamics. Nature 431, 162–167 (2004).
 4.
Auld, B. A. The synthesis of symmetrical waveguide circulators. IEEE Trans. Microw. Theory Tech. 7, 238–246 (1959).
 5.
Pozar, D. M. Microwave Engineering (AddisonWesley Publishing Company, 1993).
 6.
Manipatruni, S., Robinson, J. T. & Lipson, M. Optical nonreciprocity in optomechanical structures. Phys. Rev. Lett. 102, 213903 (2009).
 7.
Bi, L. et al. Onchip optical isolation in monolithically integrated nonreciprocal optical resonators. Nat. Photon. 5, 758–762 (2011).
 8.
Kang, M. S., Butsch, A. & Russell, P. S. J. Reconfigurable lightdriven optoacoustic isolators in photonic crystal fibre. Nat. Photon. 5, 549–553 (2011).
 9.
Kamal, A., Clarke, J. & Devoret, M. H. Noiseless nonreciprocity in a parametric active device. Nat. Phys. 7, 311–315 (2011).
 10.
Abdo, B., Sliwa, K., Frunzio, L. & Devoret, M. Directional amplification with a Josephson circuit. Phys. Rev. X 3, 031001 (2013).
 11.
Estep, N. A., Sounas, D. L., Soric, J. & Alu, A. Magneticfree nonreciprocity and isolation based on parametrically modulated coupledresonator loops. Nat. Phys. 10, 923–927 (2014).
 12.
Viola, G. & DiVincenzo, D. P. Hall effect gyrators and circulators. Phys. Rev. X 4, 021019 (2014).
 13.
Sliwa, K. M. et al. Reconfigurable josephson circulator/directional amplifier. Phys. Rev. X 5, 041020 (2015).
 14.
Kerckhoff, J., Lalumire, K., Chapman, B. J., Blais, A. & Lehnert, K. W. Onchip superconducting microwave circulator from synthetic rotation. Phys. Rev. Applied 4, 034002 (2015).
 15.
Lecocq, F. et al. Nonreciprocal microwave signal processing with a fieldprogrammable josephson amplifier. Phys. Rev. Applied 7, 024028 (2017).
 16.
Mahoney, A. C. et al. Onchip microwave quantum hall circulator. Phys. Rev. X 7, 011007 (2017).
 17.
Rosenthal, E. I., Chapman, B. J., Higginbotham, A. P., Kerckhoff, J. & Lehnert, K. W. Breaking lorentz reciprocity with frequency conversion and delay. Preprint at https://arxiv.org/abs/1705.09548 (2017).
 18.
Chapman, B. J. et al. Widely tunable onchip microwave circulator for superconducting quantum circuits. Preprint at https://arxiv.org/abs/1707.04565 (2017).
 19.
Barzanjeh, S., Abdi, M., Milburn, G. J., Tombesi, P. & Vitali, D. Reversible opticaltomicrowave quantum interface. Phys. Rev. Lett. 109, 130503 (2012).
 20.
Andrews, R. W. et al. Bidirectional and efficient conversion between microwave and optical light. Nat. Phys. 10, 321–326 (2014).
 21.
OckeloenKorppi, C. F. et al. Lownoise amplification and frequency conversion with a multiport microwave optomechanical device. Phys. Rev. X 6, 041024 (2016).
 22.
Hafezi, M. & Rabl, P. Optomechanically induced nonreciprocity in microring resonators. Opt. Express 20, 7672–7684 (2012).
 23.
Metelmann, A. & Clerk, A. A. Nonreciprocal photon transmission and amplification via reservoir engineering. Phys. Rev. X 5, 021025 (2015).
 24.
Xu, X.W. & Li, Y. Optical nonreciprocity and optomechanical circulator in threemode optomechanical systems. Phys. Rev. A 91, 053854 (2015).
 25.
Toth, L. D., Bernier, N. R., Nunnenkamp, A., Feofanov, A. K. & Kippenberg, T. J. A dissipative quantum reservoir for microwave light using a mechanical oscillator. Nat. Phys. 13, 787–793 (2017).
 26.
Shen, Z. et al. Experimental realization of optomechanically induced nonreciprocity. Nat. Photon. 10, 657–661 (2016).
 27.
Ruesink, F., Miri, M.A., Al, A. & Verhagen, E. Nonreciprocity and magneticfree isolation based on optomechanical interactions. Nat. Commun. 7, 13662 (2016).
 28.
Fang, K. et al. Generalized nonreciprocity in an optomechanical circuit via synthetic magnetism and reservoir engineering. Nat. Phys. 13, 465–471 (2017).
 29.
Dieterle, P. B., Kalaee, M., Fink, J. M. & Painter, O. Superconducting cavity electromechanics on a silicononinsulator platform. Phys. Rev. Applied 6, 014013 (2016).
 30.
Keller, A. J. et al. Al transmon qubits on silicononinsulator for quantum device integration. Appl. Phys. Lett. 111, 042603 (2017).
 31.
Andrews, R. W., Reed, A. P., Cicak, K., Teufel, J. D. & Lehnert, K. W. Quantumenabled temporal and spectral mode conversion of microwave signals. Nat. Commun. 6, 10021 (2015).
 32.
Fink, J. M. et al. Quantum electromechanics on silicon nitride nanomembranes. Nat. Commun. 7, 12396 (2016).
 33.
Lecocq, F., Clark, J. B., Simmonds, R. W., Aumentado, J. & Teufel, J. D. Mechanically mediated microwave frequency conversion in the quantum regime. Phys. Rev. Lett. 116, 043601 (2016).
 34.
Bernier, N. R. et al. Nonreciprocal reconfigurable microwave optomechanical circuit. Preprint at https://arxiv.org/abs/1612.08223 (2016).
 35.
Peterson, G. A. et al. Demonstration of efficient nonreciprocity in a microwave optomechanical circuit. Phys. Rev. X 7, 031001 (2017).
 36.
Buchmann, L. F. & StamperKurn, D. M. Nondegenerate multimode optomechanics. Phys. Rev. A 92, 013851 (2015).
Acknowledgements
We thank Nikolaj Kuntner for the development of the Python virtual instrument panel and Georg Arnold for supplementary device simulations. This work was supported by IST Austria and the European Union’s Horizon 2020 research and innovation program under grant agreement No 732894 (FET Proactive HOT). S.B. acknowledges support from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska Curie grant agreement No 707438 (MSCIF SUPEREOM). OJP acknowledges support from the AFOSRMURI Quantum Photonic Matter, the Institute for Quantum Information and Matter, an NSF Physics Frontiers Center (grant PHY1125565) with support of the Gordon and Betty Moore Foundation, and the Kavli Nanoscience Institute at Caltech.
Author information
Affiliations
Contributions
S.B. and J.M.F. conceived the ideas for the experiment. S.B. developed the theoretical model, performed and analysed the measurements. S.B., M.W., M.P. and J.M.F. designed the microwave circuit and built the experimental setup. M.K., P.B.D., J.M.F. and O.P. designed the mechanical nanobeam oscillator. J.M.F. and M.K. fabricated the sample. P.B.D. and O.P. contributed to sample fabrication. S.B. and J.M.F. wrote the manuscript. J.M.F. supervised the research.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Additional information
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Barzanjeh, S., Wulf, M., Peruzzo, M. et al. Mechanical onchip microwave circulator. Nat Commun 8, 953 (2017). https://doi.org/10.1038/s4146701701304x
Received:
Accepted:
Published:
Further reading

Nonreciprocity via Nonlinearity and Synthetic Magnetism
Physical Review Applied (2020)

Oneway Transfer of Quantum States via Decoherence
Journal of the Physical Society of Japan (2020)

Perspectives on quantum transduction
Quantum Science and Technology (2020)

Efficient microwave frequency conversion mediated by a photonics compatible silicon nitride nanobeam oscillator
Quantum Science and Technology (2020)

A unidirectional onchip photonic interface for superconducting circuits
npj Quantum Information (2020)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.