Significant efforts have been devoted over the last few years to develop efficient molecular electrocatalysts for the electrochemical reduction of carbon dioxide to carbon monoxide, the latter being an industrially important feedstock for the synthesis of bulk and fine chemicals. Whereas these efforts primarily focus on this formal oxygen abstraction step, there are no reports on the exploitation of the chemistry for scalable applications in carbonylation reactions. Here we describe the design and application of an inexpensive and user-friendly electrochemical set-up combined with the two-chamber technology for performing Pd-catalysed carbonylation reactions including amino- and alkoxycarbonylations, as well as carbonylative Sonogashira and Suzuki couplings with near stoichiometric carbon monoxide. The combined two-reaction process allows for milligram to gram synthesis of pharmaceutically relevant compounds. Moreover, this technology can be adapted to the use of atmospheric carbon dioxide.
Developing efficient electrochemical methods for the conversion of carbon dioxide into small organic C1- and C2-building blocks presents a promising means for the chemical industry to deviate from petrochemical feedstocks1,2,3,4,5,6. Ideally, renewable energy sources such as solar and wind power can be adapted to drive either the electrochemical reduction of CO2 or the production of hydrogen from water electrolysis necessary for the subsequent hydrogenation of CO2, thereby increasing the overall interest and value of such processes. Carbon monoxide represents one of these potential building blocks which formally is produced by the abstraction of oxygen from CO2. This diatomic gas is a principal feedstock for the production of hydrocarbon liquids and bulk oxygenated products such as aldehydes, alcohols, and carboxylates7,8,9,10. Industrially, CO is produced mainly from either steam reforming or coal gasification, with fossil fuels as the sole carbon source.
As such, considerable efforts by many research groups have been devoted to the identification and study of a wide variety of molecular electrocatalysts for the selective reduction of CO2 to CO. The main challenge is to develop effective catalysts that lower the overpotential necessary for the electron transfer to CO2 to generate the initial radical anion11,12,13,14,15,16. Despite these intensive and successful studies, currently there are no practical and scalable applications of combining the selective electrochemical reduction of CO2 with the synthesis of more elaborate chemicals.
Here we report on the development of an operationally simple and low-cost electrochemical set-up for the production of CO on demand in synthetically useful scales with a commercially available molecular catalyst, iron tetraphenylporphyrin (FeTPP). Particularly valuable is its adaptation to palladium-catalysed carbonylation reactions17,18,19,20 for carbon–carbon and carbon–heteroatom bond formation in the synthesis of pharmaceutically related molecules. Furthermore, we demonstrate the reusability of the electrochemical system and the possibility of exploiting atmospheric CO2 in synthesis.
Several challenges were encountered in the design of a simple, inexpensive, and operational bench-top set-up for the ex situ generation of CO and its immediate use as a valuable chemical reagent. The two-step protocol developed involves initially an electrochemical reduction of CO2 towards a predetermined amount of CO at a controlled rate followed by Pd(0)-catalysed carbonylation reaction to provide milligram to gram scale quantities of the end product. The development included firstly the identification of a suitable molecular electrocatalyst, displaying sufficient long-term stability in the preparative reduction of CO2 to CO, secondly a simple but high-performing electrode exhibiting the necessary chemoselectivity in the electrolysis process (CO vs. H2 production), thirdly an air-tight reactor system capable of handling two simultaneous reactions, the CO2 electrolysis and the Pd-catalysed carbonylation, and fourthly a small, affordable, and programmable potentiostat/galvanostat to provide a continuous but predetermined amount and rate of CO. Outlined below we describe the systematic investigation that was undertaken to address all the issues.
Among the many different CO2 reduction catalysts reported we chose to focus on the transition metal complex, iron tetraphenylporphyrin, which is commercially available and previously reported to show under electrolysis of CO2 high selectivity for CO production in the presence of Brønsted acids21. Other more elaborate iron porphyrins working at lower overpotentials have recently been prepared22, 23, and these catalysts should be equally adaptable to our set-up. The same is true for the plethora of molecular electrocatalysts based on Co, Ni, Mn, Re and others11,12,13,14,15,16, which have also been demonstrated to promote the desired transformation.
Preliminary electrochemical investigations
During our initial investigations of FeTPP with a glassy carbon (GC) electrode it was confirmed by cyclic voltammetry that weak Brønsted acids such as trifluoroethanol (TFE) and phenol could enhance the rate of CO2 reduction significantly (Fig. 1a) as previously reported24. Noteworthy, when applying phenol in a preparative one-chamber set-up, deactivation of the anode by polymerisation of the phenol as described in literature took place and decreased the efficiency of the cell25,26,27. To keep the system scalable and maintain low operational costs, various other electrode materials such as stainless steel, silver, and iron were investigated. Encouragingly, with stainless steel electrodes a steady performance for CO2 electrolysis even over several hours was achieved (Supplementary Figs 15 and 20, and Fig. 2e). Furthermore, stainless steel is inexpensive and it easily allows for the fabrication of high surface area electrodes. With a small stainless steel disc electrode it was possible to record a cyclic voltammogram of the FeTPP showing the catalytic reduction of CO2 at a potential starting from –1.5 V vs. Ag/AgCl corresponding to an overpotential of 600 mV (Fig. 1b).
To evaluate the efficiency of the FeTPP electrocatalyst in the conversion of CO2 to CO several experiments were carried out in a two-electrode set-up using stainless steel electrodes as both working and counter electrode (vide infra and Supplementary Table 1). The effect of the applied current was investigated in a series of galvanostatic experiments (configuration E1; Supplementary Figs 18 and 21). In addition, the stability of the catalyst system was examined along with the effect of varying the concentrations of the catalyst and proton source in two-electrode experiments controlling the voltage (configuration E2; Supplementary Fig. 19). As expected the catalyst concentration is pivotal for controlling the chemoselectivity, in that at least 0.2 mM is required to minimise the competing hydrogen evolution reaction from the TFE (Fig. 2a). Upon adding TFE as proton donor a steady increase in the production of CO occurs. The effect declines going towards the high-concentration range where an undesired increase in the production of hydrogen takes place (Fig. 2b). From this we selected 0.8 M TFE as the optimal condition to balance the positive effect of increased rate with the added material costs related to the use of additional proton donor.
Variation of the applied current in the range from 12 to 33 mA gratifyingly revealed an almost perfect linear relationship with the release rate of CO (Fig. 2c), thereby allowing the rate of CO produced to be adjusted to exactly what is requested by the follow-up reactions that consume CO (vide infra). Unless otherwise noted, 23 mA was used as the standard condition providing good efficiency for CO release with a rate of 0.25 mmol h–1. Higher current strengths led to a small contribution of undesirable hydrogen evolution (Fig. 2c) and only a modest increase in the faradaic efficiency of the CO2 reduction from 54 to 57% (Fig. 2d) at the expense of a significant and undesired increase in the overpotential (Fig. 2e). In general, the Faradaic efficiency for CO production is lower than the state-of-the-art reported for FeTPP ( > 90%) in DMF (Supplementary Fig. 22)21. This can be attributed to the use herein of the one-chamber electrochemical set-up for electrochemical CO2 reduction with the cathode and anode being placed so close to each other that part of the charge consumed at the cathode goes to the reduction of the oxidised species formed at the anode.
Electrochemical set-up for bulk synthesis
To perform bulk electroreduction on a mmol scale of CO2 to CO with subsequent use of the latter in a Pd-catalysed transformation, we adapted an air-tight two-chamber reactor as previously described by us (Figs. 3a, b)28, 29, though with suitable Teflon and silicon caps for allowing entry of both electrodes. Access of the produced CO into the second chamber for the reaction is possible through the glass bridge. Different sizes of the two chamber reactors were adopted, depending on the scale of the reaction (Supplementary Fig. 14). To further simplify the electrochemical operation, we constructed a simple galvanostat (denoted ElectroWare) capable of delivering either a constant voltage (0–10 V) or current (0–200 mA), while collecting and storing the data on a.csv file (Fig. 2a, Supplementary Figs 16 and 17).
Initial experiments were performed to evaluate the performance of the electrochemical reduction of CO2 adapted to the synthesis of the antidepressant moclobemide (1) via a Pd-catalysed aminocarbonylation (Fig. 3c)30, 31. The precision of the CO production was evaluated in a series of experiments performed on a 3.0 mmol scale of the aryl iodide 2 and the corresponding amine 3. In each experiment, the galvanostat was pre-programmed to generate from 0.25, 0.5, 1.0, 1.5, 2.0 to 2.5 mmol CO from the CO2 saturated DMF solution containing the catalyst FeTTP. The quantity of moclobemide produced was measured directly from the reaction mixture by HPLC analysis compared to an internal standard. As can be seen from the graph (Fig. 3d), a good correlation (R 2 = 0.994) with a slope = 1.12 was obtained for the amount of moclobemide (average of two runs) generated with the quantity set for electrochemical CO production. The higher than unity slope would suggest that the amount of CO produced is slightly greater than expected. Presumably, this can be attributed to difficulties in accounting for the pressure increase when determining the amount of CO using gas chromatography.
In a second set of experiments, we investigated the stability of the catalytic system in multiple runs for moclobemide synthesis using 3.0 mmol aryl iodide and 0.5 mmol of CO produced with the ElectroWare. After each run the reaction mixture was analysed by HPLC and the electrodes were cleaned or replaced with a new set. In all, five runs were performed and gratifyingly, in each case, the conversion of CO2 to CO was constant as observed from the production of moclobemide (Fig. 3e), testifying to the stability of the catalytic system for selective CO2 reduction. In runs 3, 4, and 5, a small amount of hydrogen was formed as observed from the reduction of the 1-chloro-4-iodobenzene to chlorobenzene. Omitting the cleaning process results in a decrease of the efficiency (Supplementary Methods and Supplementary Fig. 23).
Next, we explored the suitability of our technology for the preparation of a variety of pharmaceutically relevant molecules employing a Pd-catalysed carbonylation reaction as the key assembling step (Fig. 4 and Supplementary Figs 1–12). These transformations were run on a 0.5 mmol scale with the ElectroWare set to produce ~ 1.5 equiv. CO from a CO2 saturated 0.1 M TBABF4/DMF solution. Reaction conditions for each of the individual carbonylative couplings were previously determined applying our two-chamber technology with either COgen30 or SilaCOgen32 as the CO source.
The active ingredient in three commercially available pharmaceutical drugs could be effectively prepared via an aminocarbonylation with CO produced from the electrochemical reduction of CO2, including the PARP inhibitor, olaparib (4, 86% yield), the tyrosine-kinase inhibitor, sunitinib (5, 66% yield) and the D2-receptor antagonist, itopride (6, 63% yield). Other compounds successfully prepared from an aminocarbonylative step include thiophene carboxamide 7 (84% yield), the H3-receptor antagonist 8 (79% yield), oxadiazole 9 (73% yield) prepared from a dehydrative cyclisation of the intermediate diacyl hydrazide33, and the melanoma positron emission tomography tracer 10 (83% yield). Resorting to a Pd-catalysed alkoxycarbonylation also proved viable providing the local anesthetic, butoxycaine (11) and the cyclopropyl ester 12 in good yields, 98 and 69%, respectively.
Two carbonylative cross coupling reactions for carbon–carbon bond formation were tested as well, including the three component carbonylative Suzuki coupling for the synthesis of the blood cholesterol lowering drug, fenofibrate (13), in 57% yield and a carbonylative Sonogashira coupling for the preparation of ynone 14 in 92% isolated yield. Finally, moclobemide synthesis was increased to a 6.0 mmol scale with an approximate 6 mmol production of CO. This led satisfyingly to the gram scale synthesis of this reversible inhibitor of monoamine oxidase A in 85% yield.
Studies with atmospheric CO2
In a final study, we examined the possibility of exploiting atmospheric CO2 for the synthesis of 1 on a 0.5 mmol scale with respect to aryl iodide 2. As such we designed a triple chamber reactor (Fig. 5), to which the first chamber was loaded with the CO2 binder 15 (5.0 mmol) in dimethyl sulfoxide (Supplementary Figs 13 and 24–28 and Supplementary Table 2)34. Atmospheric air was bubbled through this solution for six days whereafter heating in the closed chamber to 130 °C allowed for CO2 release. The electrolytic reduction of the released CO2 was set for the production of 1.5 mmol of CO, which after the aminocarbonylation provided moclobemide in an outstanding 99% yield.
We have reported on the development of an inexpensive and user-friendly electrochemical device for carrying out the proton-coupled electroreduction of CO2 to CO with an iron porphyrin catalyst, and its subsequent exploitation to four different palladium-catalysed carbonylation reactions, e.g. amino- and alkoxycarbonylations, in addition to carbonylative Sonogashira and Suzuki couplings. This simple set-up allows for the generation of biologically active compounds and simultaneously avoids the concerns of working with CO, which is generated inside the electrochemical reaction chamber and only in near-stoichiometric amounts with respect to the ensuing carbonylation reaction. Particularly noteworthy is, that our process can be exploited for performing carbonylative couplings in milligram to gram scales and that the chemical technology developed exploits a waste greenhouse gas as one of the reagents. Advantageously the costs for performing the electrochemical reduction are low as we have designed and built a simple galvanostat/potentiostat combined with stainless-steel electrodes.
Although our experiments reveal the successful adaptation of electrochemistry with transition metal catalyzed carbonylations for chemical synthesis, there is still room for improvement. For example, the kinetics for the electrochemical CO2 reduction needs to be enhanced in order to embrace other carbonylation reactions as well. So far, our equipment can be set to produce from 0.5 to ~ 6 mmol CO, but the specific amount of CO generated is slow and time dependent. Hence, 0.5 mmol of CO takes ~ 2 h, whereas 6 mmol will require up to 24 h. A more rapid production of CO is required if we are to include other carbonylative transformations with stoichiometric CO, such as double carbonylations for α-ketoamide synthesis and carbonylative Heck couplings35,36,37, which both require a significant CO partial pressure from the reaction start. As expected these Pd-mediated carbonylations proved to be less efficient with our set-up. Alternatively, other electrode materials or more efficient electrocatalysts could be considered for achieving a faster CO2 to CO conversion22, 23.
Another adaption of our system would be to identify conditions for performing the CO2 reduction in a low-cost and environmentally friendly solvent, such as water. Recently, it has been demonstrated for iron and cobalt porphyrin molecular catalysts that they exhibit good activity and selectivity for the electrochemical CO2-to-CO conversion in pH neutral water when immobilised on an electrode surface38,39,40,41,42. In principle, it is possible to couple the CO2 reduction in water with the carbonylation reaction. However, for the presented system where the electroreduction/oxidation is in one compartment, water based systems should be avoided since water oxidation at the counter electrode leads to the production of O2, which would be detrimental for the Pd-catalysed carbonylative couplings. A solution could be found by using a sacrificial anode or by separating the counter electrode from the working electrode, but this requires a third compartment and thereby increases the complexity of the set-up.
On a final note, we envisage that this chemistry technology can be scalable to large-scale carbonylation reactions. However, to achieve this goal a flow process for the CO2 to CO would necessarily have to be developed to keep the reactor volumes to a convenient size. Although we believe this is achievable, such technologies would require a greater focus on instrument and reactor design. Finally, because of the ease in performing these electrochemical reductions with the described equipment, we foresee that the chemistry presented in this paper will have a significant impact on promoting others to apply electrochemical reactions in organic synthesis besides CO2 reduction.
Synthesis of moclobemide (1)
In a flame-dried two-chamber reactor (see Supplementary Fig. 14) charged with stirring bars were added Xantphos Pd G4 (24 mg, 5 mol%), 1-chloro-4-iodobenzene (112 mg, 0.5 mmol) DABCO (119 mg, 1.0 mmol), THF (3 ml) and 2-morpholinoethylamine (113 μl, 1.0 mmol) to chamber A. FeTPP (6 mg), TBABF4 (1.10 g), DMF (35 ml), and TFE (2 ml) were introduced to chamber B. Electrodes were mounted and the glassware was sealed with screw caps fitted with Teflon-coated silicone seals. The solution in chamber B was bubbled through with CO2 for 10–15 min to achieve saturation (outlet located in chamber A). The ElectroWare was set up using the galvanostatic configuration E1 (see Supplementary Fig. 18), electrodes were connected, and electrolysis was commenced while stirring the solution in both chambers. Chamber B was at room temperature while chamber A was placed in a preheated heat block.
Stirring was continued for 18 h, after which the chemical reaction was cooled to room temperature and the volatiles were removed in vacuo. The crude residue was purified by flash column chromatography to yield the desired product 1. All yields are average of two runs. For NMR spectra and specific conditions, see Supplementary Methods.
The data supporting this work are available from the authors upon reasonable request. The data that support the findings of this study are available within the paper and its Supplementary Information file or are available on request from the corresponding author upon request.
Liu, Q., Wu, L., Jackstell, R. & Beller, M. Using carbon dioxide as a building block in organic synthesis. Nat. Commun. 5, 3091–3115 (2015).
Aresta, M. in Carbon Dioxide as Chemical Feedstock (Wiley-VCH Verlag GmbH & Co. KGaA, 2010).
Aresta, M., Dibenedetto, A. & Angelini, A. Catalysis for the valorization of exhaust carbon: from CO2 to chemicals, materials, and fuels. Technological use of CO2. Chem. Rev. 114, 1709–1742 (2014).
Appel, A. M. et al. Frontiers, opportunities, and challenges in biochemical catalysis of CO2 fixation. Chem. Rev. 113, 6621–6658 (2013).
Senftle, T. P. & Carter, E. A. The holy grail: chemistry enabling an economical viable CO2 capture, utilizaiton, and storage strategy. Acc. Chem. Res. 50, 472–475 (2017).
Cokoja, M., Bruckmeier, C., Rieger, B., Herrmann, W. A. & Kühn, F. E. Transformation of carbon dioxide with homogeneous transition-metal catalysts: a molecular solution to a global challenge? Angew. Chem. Int. Ed. 50, 8510–8537 (2011).
Jahangiri, H., Bennett, J., Mahjoubi, P., Wilson, K. & Gu, S. A review of advanced catalyst development for Fischer-Tropsch synthesis of hydrocarbons from biomass derived syn-gas. Catal. Sci. Technol. 4, 2210–2229 (2014).
Franke, R., Selent, D. & Börner, A. Applied hydroformylation. Chem. Rev. 112, 5675–5732 (2012).
Jones, J. H. The CativaTM process for the manufacture of acetic acid. Platinum Metals Rev. 44, 94–105 (2000).
Bertleff, W. in Ullmann’s Encyclopedia of Industrial Chemistry (Wiley-VCH Verlag GmbH & Co. KgaA, 2000).
Benson, E. E., Kubiak, C. P., Sathrum, A. J. & Smieja, J. M. Electrocatalytic and homogeneous approaches to conversion of CO2 to liquid fuels. Chem. Soc. Rev. 38, 89–99 (2009).
Costentin, C., Drouet, S., Robert, M. & Savéant, J.-M. Catalysis of the electrochemical reduction of carbon dioxide. Chem. Soc. Rev. 42, 2423–2436 (2013).
Costentin, C., Robert, M. & Savéant, J.-M. Current issues in molecular catalysis illustrated by iron poryphyrins as catalysts off the CO2-to-CO electrochemical conversion. Acc. Chem. Res. 48, 2996–3006 (2015).
Sampson, M. D. & Kubiak, C. P. Manganese electrocatalysts with bulky bipyridine ligands: utilizing Lewis acids to promote carbon dioxide reduction at low overpotentials. J. Am. Chem. Soc. 138, 1386–1393 (2016).
Bonin, J., Maurin, A. & Robert, M. Molecular catalysis of the electrochemical and photochemical reduction of CO2 with Fe and Co metal based complexes. Recent advances. Coord. Chem. Rev. 334, 184–198 (2016).
Takeda, H., Cometto, C., Ishitani, O. & Robert, M. Electrons, photons, protons and earth-abundant metal complexes for molecular catalysis of CO2 reduction. ACS Cat. 7, 70–88 (2017).
Kollár, L. (ed.) Modern carbonylation methods (Wiley-VCH, 2008).
Wu, X.-F., Neumann, H. & Beller, M. Palladium-catalyzed carbonylative coupling reactions between Ar–X and carbon nucleophiles. Chem. Soc. Rev. 40, 4986–5009 (2011).
Wu, X.-F., Neumann, H. & Beller, M. Synthesis of heterocycles via palladium-catalyzed carbonylations. Chem. Rev. 113, 1–35 (2013).
Wu, X.-F. & Beller, M. Transition Metal Catalyzed Carbonylation Reactions (Springer-Verlag, 2013).
Bhugun, I., Lexa, D. & Savéant, J.-M. Ultraefficient selective homogeneous catalysis of the electrochemical reduction of carbon dioxide by an iron(0) porphyrin associated with a weak Brønsted acid cocatalyst. J. Am. Chem. Soc. 116, 5015–5016 (1994).
Costentin, C., Drouet, S., Robert, M. & Savéant, J.-M. A local proton source enhances CO2 electroreduction to CO by a molecular Fe catalyst. Science 338, 90–94 (2012).
Azcarate, I., Costentin, C., Robert, M. & Savéant, J.-M. Through-space charge interaction substituent effects in molecular catalysis leading to the design of the most efficient catalyst of CO2-to-CO electrochemical conversion. J. Am. Chem. Soc. 138, 16639–16644 (2016).
Bhugun, I., Lexa, D. & Savéant, J.-M. Catalysis of the electrochemical reduction of carbon dioxide by iron(0) porphyrins: Synergistic effect of weak Brønsted acids. J. Am. Chem. Soc. 118, 1769–1776 (1996).
Fugassi, J. P. & McKinney D. S. Electrolytic polymerization of phenol. US patent 2961384A (1960).
Ferreira, M., Varela, H., Torresi, R. M. & Tremiliosi-Filho, G. Electrode passivation caused by polymerization of different phenolic compounds. Electrochim. Acta 52, 434–442 (2006).
Bao, L., Xiong, R. & Wei, G. Electrochemical polymerization of phenol on 304 stainless steel anodes and subsequent coating structure analysis. Electrochim. Acta 55, 4030–4038 (2010).
Hermange, P. et al. Ex situ generation of stoichiometric and substoichiometric 12CO and 13CO and its efficient incorporation in palladium catalyzed aminocarbonylations. J. Am. Chem. Soc. 133, 6061–6071 (2011).
Friis, S. D., Lindhardt, A. T. & Skrydstrup, T. The development and application of two-chamber reactors and carbon monoxide precursors for safe carbonylation reactions. Acc. Chem. Res. 49, 594–605 (2016).
Martinelli, J. R., Watson, D. A., Freckmann, D. M. M., Barder, T. E. & Buchwald, S. L. Palladium-catalyzed carbonylation reactions of aryl bromides at atmospheric pressure: a general system based on xantphos. J. Org. Chem. 73, 7102–7107 (2008).
Bruno, N. C., Niljianskul, N. & Buchwald, S. L. N-Substituted 2-aminobiphenylpalladium methanesulfonate precatalysts and their use in C–C and C–N cross-couplings. J. Org. Chem. 79, 4161–4166 (2014).
Friis, S. D., Taaning, R., Lindhardt, A. T. & Skrydstrup, T. Silacarboxylic acids as efficient carbon monoxide releasing molecules: synthesis and application in palladium-catalyzed carbonylation reactions. J. Am. Chem. Soc. 133, 18114–18117 (2011).
Andersen, T. L. et al. 1,2,4- and 1,3,4-Oxadiazole synthesis by Pd-catalyzed carbonylative assembly of aryl bromides with amidoximes or hydrazides. Adv. Synth. Cat 356, 3074–3082 (2014).
Croucher, P. D., Klingele, M. H., Noble, A. & Brooker, S. Tricopper(II) complexes of unsymmetrical macrocycles incorporating phenol and pyridine moieties: The development of two stepwise routes. Dalton. Trans. 4000–4007 (2007).
Hermange, P., Gøgsig, T. M., Lindhardt, A. T., Taaning, R. H. & Skrydstrup, T. Carbonylative Heck couplings using CO generated ex situ in a two-chamber system. Org. Lett. 13, 2444–2447 (2011).
Gøgsig, T. M., Nielsen, D. U., Lindhardt, A. T. & Skrydstrup, T. Palladium catalyzed carbonylative Heck reaction affording monoprotected 1,3-ketoaldehydes. Org. Lett. 14, 2536–2539 (2012).
Nielsen, D. U. et al. Carbonylative palladium-catalyzed double carbonylation using near stoichiometric carbon monoxide: expedient access to substituted 13C2-labeled phenethylamines. J. Org. Chem. 77, 6155–6165 (2012).
Maurin, A. & Robert, M. Catalytic CO2-to-CO conversion in water by covalently functionalized carbon nanotubes with a molecular iron catalyst. Chem. Commun. 52, 12084–12087 (2016).
Maurin, A. & Robert, M. Noncovalent immobilization of a molecular iron-based electrocatalyst on carbon electrodes for selective, efficient CO2-to-CO conversion in water. J. Am. Chem. Soc. 138, 2492–2495 (2016).
Lin, S. et al. Covalent organic frameworks comprising cobalt porphyrins for catalytic CO2 reduction in water. Science 349, 1208–1213 (2015).
Kornienko, N. et al. Metal–organic frameworks for electrocatalytic reduction of carbon dioxide. J. Am. Chem. Soc. 137, 14129–14135 (2015).
Hu, X.-M., Rønne, M. H., Pedersen, S. U., Skrydstrup, T. & Daasbjerg, K. Enhanced catalytic activity of cobalt porphyrin in CO2 electroreduction upon immobilization on carbon materials. Angew. Chem. Int. Ed. 56, 6468–6472 (2017).
We thank the Danish National Research Foundation (grant no. DNRF118) and Aarhus University for financial support.
T.S. is co-owner of SyTracks a/s, which commercialises the COgen and SilaCOgen. The remaining authors declare no competing financial interests.
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Jensen, M.T., Rønne, M.H., Ravn, A.K. et al. Scalable carbon dioxide electroreduction coupled to carbonylation chemistry. Nat Commun 8, 489 (2017). https://doi.org/10.1038/s41467-017-00559-8
Computational Insights on the Electrocatalytic Behavior of [Cp*Rh] Molecular Catalysts Immobilized on Graphene for Heterogeneous Hydrogen Evolution Reaction
Scientific Reports (2020)
Copper atom-pair catalyst anchored on alloy nanowires for selective and efficient electrochemical reduction of CO2
Nature Chemistry (2019)
Nature Catalysis (2019)
Chemically and electrochemically catalysed conversion of CO2 to CO with follow-up utilization to value-added chemicals
Nature Catalysis (2018)