Abstract
Termite wings are covered with hair shafts and micrasters, which provide it with dual wettability. Although the surface is superhydrophobic for bulk water and large droplets, it is adhesive for microdroplets of water. We mimicked this rough surface by applying a photoinduced crystal growth phenomenon on a photoreactive crystalline surface consisting of two photochromic diarylethene derivatives. This crystalline surface showed dual wettability, but the photoreactive crystalline system was not applicable under daylight. This lack of applicability was apparent because the rough crystalline structures on the surface melted under visible light irradiation. We used soft lithography and transcribed the rough structure of the crystalline film to a stable polycycloolefin polymer (ZEONEX 480) surface. In this case, ultrasonic treatment was indispensable for molding complex structured surfaces. The transcribed surface showed the same characteristics of dual wettability as the crystalline surface.
This is a preview of subscription content, access via your institution
Access options
Subscribe to this journal
Receive 12 print issues and online access
$259.00 per year
only $21.58 per issue
Buy this article
- Purchase on SpringerLink
- Instant access to full article PDF
Prices may be subject to local taxes which are calculated during checkout
Similar content being viewed by others
References
Li J, Guo Z, Liu W. Biomimetic superhydrophobic materials construct from binary structure: a review on design, properties, and applications. Adv Mater Interfaces. 2022;10:2201847.
Barthlott W, Neinhuis C. Purity of the sacred lotus, or escape from contamination in biological surfaces. Planta. 1997;202:1–8.
Yamamoto M, Nishikawa N, Mayama H, Nonomura Y, Yokojima S, Nakamura S, et al. Theoretical explanation of the lotus effect: Superhydrophobic property changes by removal of nanostructures from the surface of a lotus leaf. Langmuir. 2015;31:7355–63.
Patankar NA. Mimicking the lotus effect: Influence of double roughness structures and slender pillars. Langmuir. 2004;20:8209–13.
Uchida K, Nishimura R, Hatano E, Mayama H, Yokojima S. Photochromic crystalline systems mimicking bio-functions. Chem Eur J. 2018;24:8491–506.
Irie M. Diarylethene molecular photoswitches: concepts and functionalities. Wiley-VCH: Weinheim; 2021.
Nishimura R, Hyodo K, Sawaguchi H, Yamamoto Y, Nonomura Y, Mayama H, et al. Fractal surfaces of molecular crystals mimicking lotus leaf with phototunable double roughness structures. J Am Chem Soc. 2016;138:10299–303.
Nishimura R, Mayama H, Nonomura Y, Yokojima S, Nakamura S, Uchida K. Crystal growth technique for formation of double roughness structures mimicking lotus leaf. Langmuir. 2019;35:14124–32.
Watson GS, Cribb BW, Watson JA. How micro/nanoarchitecture facilitates anti-wetting: an elegant hierarchical design on the termite wing. ACS Nano. 2010;4:129–36.
Gao XF, Yan X, Yao X, Xu L, Zhang K, Zhang JH, et al. The dry-style antifogging properties of mosquito compound eyes and artificial analogues prepared by soft lithography. Adv Mater. 2007;19:2213–7.
Wisdom KM, Watson JA, Qu XP, Liu FJ, Watson GS, Chen CH. Self-cleaning of superhydrophobic surfaces by self-propelled jumping condensate. Proc Natl Acad Sci USA. 2013;110:7992–7.
Oh J, Dana CE, Hong S, Roman JK, Jo KD, Hong JW, et al. Exploring the role of habitat on the wettability of cicada wings. ACS Appl Mater Interfaces. 2017;9:27173–84.
Liu C, Ju J, Zheng Y, Jiang L. Asymmetric ratchet effect for directional transport of fog drops on static and dynamic butterfly wings. ACS Nano. 2014;8:1321–9.
Wang Q, Yao X, Liu H, Quéré D, Jiang L. Self-removal of condensed water on the legs of water striders. Proc Natl Acad Sci USA. 2015;112:9247–52.
Huang HX, An Y. Fabrication and condensate microdrop self-propelling of biomimetic nanostructured polymer surfaces without chemical modification. ACS Appl Polym Mater. 2019;1:939–43.
Nishimura R, Hyodo K, Mayama H, Yokojima S, Nakamura S, Uchida K. Dual wettability on diarylethene microcrystalline surface mimicking a termite wing. Commun Chem. 2019;2:90.
Chou SY, Krauss PR, Renstrom PJ. Nanoimprint lithography. J Vac Sci Technol B. 1996;14:4129–33.
Guo LJ. Nanoimprint lithography: methods and material requirements. Adv Mater. 2007;19:495–513.
Jeon J, Choi H, Cho W, Hong J, Youk JH, Wie JJ. Height-tunable replica molding using viscous polymeric resins. ACS Macro Lett. 2011;11:428–33.
Hong SH, Hwang J, Lee H. Replication of cicada wing’s nano-patterns by hot embossing and UV nanoimprinting. Nanotechnology. 2009;20:385303.
Oh J, Hoffman JB, Hong S, Jo KD, Román-Kustas J, Reed JH, et al. Dissolvable template nanoimprint lithography: a facile and versatile nanoscale replication technique. Nano Lett. 2020;20:6989–97.
Han Z, Wang Z, Li B, Feng X, Jiao Z, Zhang J, et al. Flexible self-cleaning broadband antireflective film inspired by the transparent cicada wings. ACS Appl Mater Interfaces. 2019;11:17019–27.
Sarrat B, Pecheyran C, Bourrigaud S, Billon L. Bioinspired material based on femtosecond laser machining of cast sheet micromolding as a pattern transfer process. Langmuir. 2011;27:3174–9.
Xi J, Jiang L. Biomimic superhydrophobic surface with high adhesive forces. Ind Eng Chem Res. 2008;47:6354–7.
Acknowledgements
We are grateful to Zeon Co., Ltd., for providing the ZEONEX 480 polymer. This work was partially supported by Grants-in-Aid for Transformative Research Areas (A) (JP22H05197) funded by the Japan Society for the Promotion of Science.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare no competing interests.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Hashimoto, Y., Hase, A., Tani, A. et al. Polymer replica of microcrystalline surface with dual wettability, mimicking a termite wing. Polym J 56, 847–853 (2024). https://doi.org/10.1038/s41428-024-00926-5
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1038/s41428-024-00926-5