Skip to main content

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

  • Original Article
  • Published:

Microstructure and properties of microcellular silicone rubber foams with improved surface quality

Polymer Journal volume 52, pages 207–216 (2020)Cite this article

Subjects

Abstract

Supercritical foaming technology is used for producing foamed silicone rubber (SR) materials because of its many advantages, but this technology has been limited by its propensity to prepare microcellular silicone rubber foams (SRF) with surface defects. In this study, a novel method of preparing microcellular SRF without surface defects was successfully developed by investigating the principle of cellular formation during the process of supercritical foaming. Meanwhile, the microstructure, surface profile, mechanical properties, and thermal conductivity of microcellular SRF were investigated in detail. The results show that the plasticity of the SR matrix plays an important role in cellular formation. The maximum tensile strength of the microcellular SRF achieves 4.77 MPa and the elongation at break is 1866.29%. The thermal conductivity of the microcellular SRF achieves a minimum value of 0.14 W/m K, and the thermal insulation property is improved by approximately 39% compared with the SR composites.

This is a preview of subscription content, access via your institution

Access options

Buy this article

  • Purchase on SpringerLink
  • Instant access to full article PDF
Buy now

Prices may be subject to local taxes which are calculated during checkout

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9

Similar content being viewed by others

References

  1. Zhou NL. Introduction of silicone polymer. Beijing: Science Press; 2000.

    Google Scholar 

  2. Hu SS. Cushioning and damping of vibration of low density porous material. J Vib Shock. 1999;18:18–43.

    Google Scholar 

  3. Wang YB. Research on silicone rubber damping material. Mater Rev. 2004;18:50–3.

    Google Scholar 

  4. Liu PB, Liu DL, Zou HW, Fan P, Xu W. Structure and properties of closed-cell foam prepared from irradiation crosslinked silicone rubber. J Appl Polym Sci. 2009;113:3590–5.

    Article  CAS  Google Scholar 

  5. Zhao XW, Zang CG, Sun YL, Zhang YL, Wen YQ, Jiao QJ. Effect of hybrid hollow microspheres on thermal insulation performance and mechanical properties of silicone rubber composites. J Appl Polym Sci. 2017;135:46025.

    Article  Google Scholar 

  6. Jeddi J, Katbab AA. The electrical conductivity and EMI shielding properties of polyurethane foam/silicone rubber/carbon black/nanographite hybrid composites. Polym Composite. 2017;39:1–9.

    Article  Google Scholar 

  7. Rhodes JL, Yacoe MD. Preoperative planning for the separation of omphalopagus conjoined twins-the role of a multicomponent medical model. J Craniofac Surg. 2013;24:175–7.

    Article  Google Scholar 

  8. Luo SK, Ding GF, Dai B, Yang M, Liu F. Study on the cell structure and mechanical properties of methyl vinyl silicone rubber foam materials. Adv Mater Res. 2014;1004–1005:297–306.

    Article  Google Scholar 

  9. Hong I-K, Lee S. Microcellular foaming of silicone rubber with supercritical carbon dioxide. Korean J Chem Eng. 2013;31:166–71.

    Article  Google Scholar 

  10. Song LX, Lu A, Feng PJ, Lu ZY. Preparation of silicone rubber foam using supercritical carbon dioxide. Mater Lett. 2014;121:126–8.

    Article  CAS  Google Scholar 

  11. Liao X, Xu H, Li SJ, Zhou CJ, Li GX, Park CB. The effects of viscoelastic properties on the cellular morphology of silicone rubber foams generated by supercritical carbon dioxide. RSC Adv. 2015;129:106981–8.

    Article  Google Scholar 

  12. Yang Q, Yu HT, Song LX, Zhang F, Lu A, Liu T, et al. Solid-state microcellular high temperature vulcanized (HTV) silicone rubber foam with carbon dioxide. J Appl Polym Sci. 2016;44807:1–9.

    Google Scholar 

  13. Yan H, Wang K, Zhao Y. Fabrication of silicone rubber foam with tailored porous structures by supercritical CO2. Macromol Mater Eng. 2017;302:1600377.

    Article  Google Scholar 

  14. Bai JW, Liao X, Huang EB, Luo Y, Yang Q, Li GX. Control of the cell structure of microcellular silicone rubber/nanographite foam for enhanced mechanical performance. Mater Des. 2017;133:288–98.

    Article  CAS  Google Scholar 

  15. Tang WY, Bai JW, Liao X, Xiao W, Luo Y, Yang Q, et al. Carbon nanotube-reinforced silicone rubber nanocomposites and the foaming behavior in supercritical carbon dioxide. J Supercrit Fluid. 2018;141:78–87.

    Article  CAS  Google Scholar 

  16. Bai JW, Liao X, Li GX. Preparation and properties of UV and infrared excitable dual wavelength fluorescent anti-counterfeiting fibers. Polym Eng Sci. 2017;33:155–66.

    CAS  Google Scholar 

  17. Li G, Xin S, Xu XJ, Ma FG. Influence of hydroxyl terminated silicone oil on foam peroxide curing system of silicone foam. J Funct Mater. 2016;5:375–9.

    Google Scholar 

  18. Feng PJ, Song LX, Lu ZY, Lu A. Study on high temperature vulcanizing silicone rubber foamed by supercritical carbon dioxide. J Mater Eng. 2011;8:62–7.

    Google Scholar 

  19. Xiang B, Deng ZP, Zhang FS, Liu T, Luo S K. Microcellular silicone rubber foams: the influence of reinforcing agent on cellular morphology and nucleation. Polym Eng Sci. 2018;59:1–10.

    Article  Google Scholar 

  20. Liu T, Lei YJ, Zhang FS, Guo SY, Luo SK. Microcellular crosslinked silicone rubber foams: influence of nucleation agent (polyhedral oligomeric silsesquioxane) on the rheological, vulcanizing, cell morphological properties. Polym Plast Technol. 2017;12:1623–33.

    Article  Google Scholar 

  21. Satish KG, Eric JB. Effect of pressure and temperature on nucleation. Beijing: Society of plastics engineers Inc.; 1994. p. 34.

  22. Matuana LM, Diaz CA. Study of cell nucleation in microcellular poly(lactic acid) foamed with supercritical CO2 through a continuous-extrusion process. Ind Eng Chem Res. 2010;49:2186–93.

    Article  CAS  Google Scholar 

  23. Hu WJ, Chen H, Zhang K. Effect of porosity on properties of open-cell silicone rubber foam. Vol. 45. Beijing: Rubber Industry; 1998. p. 45.

  24. Jose AR, Viot P, Dumon M. Microcellular foaming of polymrthylmethacrylate in a batch supercritical CO2 process: effect of microstructure on compression behavior. J Appl Polym Sci. 2010;118:320–31.

  25. Matsuura K, Saito H. Tensile properties and interfacial adhesion of silicone rubber/polyethylene blends by reactive blending. J Appl Polym Sci. 2017;17:46192.

    Google Scholar 

  26. Ziraki S, Zebarjadn SM, Hadianfard MJ. A study on the tensile properties of silicone rubber/polypropylene fibers/silica hybrid nanocomposites. Sci Direct. 2016;57:289–96.

    CAS  Google Scholar 

  27. Li ZH, Lu ZY, Song LX. Preparation and properties of microcellular silicone rubber with supercritical carbon dioxide. J Southwest Univ Sci Technol. 2017;32:1–7.

    CAS  Google Scholar 

  28. Ma JZ, Bian CL, Xue CH, Deng FQ. Wear-resistant EPDM/silicone rubber foam materials. J Porous Mater. 2016;23:201–9.

    Article  CAS  Google Scholar 

  29. Zhang CL, Zhang CY, Huang R, Gu XY. Effects of hollow microspheres on the thermal insulation of polysiloxane foam. J Appl Polym Sci. 2016;44778:1–7.

    Google Scholar 

  30. Wang GL, Zhao JC, Wang GZ, Lun HM, Parkb CB, Zhao GQ. Low-density and structure-tunable microcellular PMMA foams with improved thermal-insulation and compressive mechanical properties. Eur Polym J. 2017;95:382–93.

    Article  CAS  Google Scholar 

Download references

Acknowledgements

This work was supported by the National Natural Science Foundation of China (Grant numbers: 51773186 and 51503189).

Author information

Authors and Affiliations

  1. Institute of Chemical Materials, China Academy of Engineering Physics, 621900, Mianyang, P. R. China

    Yalan Jia, Bin Xiang, Wenhuan Zhang, Tao Liu & Shikai Luo

  2. Material Science and Engineering College, Southwest University of Science and Technology, 621010, Mianyang, P. R. China

    Yalan Jia

Authors
  1. Yalan Jia
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Bin Xiang
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Wenhuan Zhang
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Tao Liu
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Shikai Luo
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding authors

Correspondence to Tao Liu or Shikai Luo.

Ethics declarations

Conflict of interest

The authors declare that they have no conflict of interest.

Additional information

Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Jia, Y., Xiang, B., Zhang, W. et al. Microstructure and properties of microcellular silicone rubber foams with improved surface quality. Polym J 52, 207–216 (2020). https://doi.org/10.1038/s41428-019-0249-5

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1038/s41428-019-0249-5

This article is cited by

Search

Advanced search

Quick links