Fig. 10: MCFA device fabrication. | Microsystems & Nanoengineering

Fig. 10: MCFA device fabrication.

From: A new microchannel capillary flow assay (MCFA) platform with lyophilized chemiluminescence reagents for a smartphone-based POCT detecting malaria

Fig. 10

a Schematic of the COC LOC fabrication process: (i) clamping and plasticization, (ii) molding, (iii) LOC ejection, (iv) Solvent bonding using thin COC film, and (v) Solvent bonded MCFA lab chip. b Magnified image of the fabricated aluminum micro-mold on a 3-inch aluminum wafer and c Injection-molded MCFA lab chip on COC

Back to article page