Abstract
Organic-inorganic hybrid perovskite (OIHP) photodetectors that simultaneously achieve an ultrafast response and high sensitivity in the near-infrared (NIR) region are prerequisites for expanding current monitoring, imaging, and optical communication capbilities. Herein, we demonstrate photodetectors constructed by OIHP and an organic bulk heterojunction (BHJ) consisting of a low-bandgap nonfullerene and polymer, which achieve broadband response spectra up to 1 μm with a highest external quantum efficiency of approximately 54% at 850 nm, an ultrafast response speed of 5.6 ns and a linear dynamic range (LDR) of 191 dB. High sensitivity, ultrafast speed and a large LDR are preeminent prerequisites for the practical application of photodetectors. Encouragingly, due to the high-dynamic-range imaging capacity, high-quality visible-NIR actual imaging is achieved by employing the OIHP photodetectors. We believe that state-of-the-art OIHP photodetectors can accelerate the translation of solution-processed photodetector applications from the laboratory to the imaging market.
Similar content being viewed by others
Introduction
Serving as technical functional components for the translation of optical signals into electrical signals, photodetectors have received extensive attention and have been applied in various fields, including industrial production, military affairs, biochemical detection, optical communication, and scientific research1,2,3,4,5,6,7,8,9,10. The versatility and availability of photodetectors always depend on a few predominant factors: the photoresponse speed, sensitivity to lower brightness, detection band in which photodetectors can efficaciously detect light and dynamic range response11,12,13,14,15,16. Correspondingly, the key photodetector parameters that are to used to evaluate these performance factors are the response time or speed, spectral responsivity (R), noise current, external quantum efficiency (EQE), specific detectivity (D*) and linear dynamic range (LDR)17,18,19,20. Recently, the exploration of high-performance photodetectors has gradually become a research focus in the field of optoelectronics and high-quality imaging.
Organic-inorganic hybrid perovskites (OIHPs) are emerging materials that have been progressively enabling new thin-film optoelectronics, including solar cells21,22,23,24,25,26,27, light-emitting diodes28,29 and photodetectors14,16,30,31,32,33,34,35,36. The extensive application of hybrid perovskites can be attributable to their excellent optical and electrical properties, including a direct bandgap, large absorption coefficient, high carrier mobility, and low trap density37,38,39,40. Therefore, OIHP photodetectors have demonstrated high R, high D*, an ultrafast response speed and a high LDR when combined with device structure engineering11,18,41. However, the detection range of MAPbI3 (either polycrystalline films or thin single crystals) is limited to the wavelength region below 820 nm and does not cover the near-infrared (NIR) range, which severely limits its application, especially in biomedical imaging. To overcome this problem, an advantageous strategy has been demonstrated: combining OIHP and an organic bulk heterojunction (BHJ) consisting of donor-acceptor materials with light absorption in the NIR region16,35,36,42. Shen et al. reported a composite photodetector based on MAPbI3 and PDPPTDTPT/PCBM, which exhibited a wider detection wavelength extending to 950 nm with a 5 ns ultrafast response time16. This work provided an effective way of achieving both a wider and faster response for next-generation photodetectors. However, the sole flaw of the photodetectors was that the EQE value in the NIR region failed to reach a similar value to that in the UV-visible range, which resulted from the weak NIR absorption of the low-bandgap polymer and a mismatched energy level alignment at the interface between the OIHP and BHJ layers. Wang et al. reported photodetectors based on MAPbI3 and PDPP3T/PC71BM BHJ, achieving a slightly higher EQE of 40% in the NIR region. However, the achieved response time on the order of microseconds cannot easily meet the application requirements36. Recently, Wu et al. demonstrated a broadband photodetector with an EQE of 70% in the NIR region by coating PTB7-Th:IEICO-4F on MAPbI335. However, the photodetectors did not display an inspiring performance in terms of a lower noise current and an extremely fast response time. State-of-the-art OIHP broadband photodetectors should have a high EQE value in the NIR region, high sensitivity and an ultrafast response speed. However, no such results have been reported to date. Compared with previously reported NIR materials such as PDPPTDTPT, PDPP3T, and IEICO-4F, a fused-ring electron acceptor named F8IC with a lower bandgap and higher electron mobility has been successfully synthesized43. F8IC exhibits an extremely low bandgap of 1.43 eV, which matches well with the energy levels of the polymer donor PTB7-Th (highest occupied molecular orbital (HOMO) energy level of −5.20 eV, Lowest Unoccupied Molecular Orbital (LUMO) energy level of −3.59 eV) to constitute the organic BHJ. The structural formulas of the two materials are shown in the inset of Fig. 1b. Polymer solar cells (PSCs) based on a PTB7-Th:F8IC blend have shown a power conversion efficiency (PCE) of 10.9% with a high EQE extending into the NIR region43. Furthermore, the higher electron mobility of F8IC is ten times higher than that of IEICO-4F44,45, enabling a faster response speed for hybrid photodetectors. In addition, the absorption of fullerenes in the NIR region is very weak, resulting in a low NIR response. The nonfullerene F8IC has a stronger NIR absorption and a better energy level alignment to match the perovskite layers than a fullerene system. F8IC generates excitons, which can be dissociated into electrons and holes under NIR light excitation. Photogenerated electrons will directly transfer to C60 and then be collected by the cathodes, while NIR photogenerated holes can be transported to perovskite through PTB7-Th and finally arrive at the anodes through the PTAA layer. Herein, an organic BHJ consisting of PTB7-Th:F8IC is introduced into OIHP to structure photodetectors, yielding a broad EQE covering 1000 nm with a peak of 54% in the NIR region. In addition, the photodetectors exhibit a high D* of over 2.3 × 1011 Jones (cm Hz1/2 W−1) at 870 nm and an ultrafast response time of 5.6 ns. To the best of our knowledge, this is the top-ranking level response speed reported for NIR OIHP photodetectors. More importantly, the broadband photodetector has practical application ability, which is demonstrated with high-quality imaging in both the visible and NIR ranges due to its high-dynamic-range imaging capacity. We believe that state-of-the-art hybrid perovskite photodetectors can provide a powerful supplement for inorganic counterparts to meet more energetic requirements.
Results and discussion
Fig. 1a shows a schematic structure of the OIHP/BHJ photodetectors, which consist of indium tin oxide (ITO)/poly(bis(4-phenyl) (2,4,6-trimethylphenyl) amine (PTAA)/CH3NH3PbI3 (MAPbI3)/F8IC:PTB7-Th/ C60/ 2,9-dimethyl-4,7- diphenyl-1,10-phenanthroline (BCP)/copper (Cu). The OIHP polycrystalline films were grown equably on PTAA-modified ITO conductive glass, and the F8IC:PTB7-Th film acted as an NIR light photosensitive layer on the OIHP active layer. Fig. 1b shows the absorption spectra of pure MAPbI3, F8IC:PTB7-Th and MAPbI3/F8IC:PTB7-Th composite films. The BHJ film reveals a dominant absorption band covering 550 nm to 1000 nm with a visible peak at 710 nm and an NIR peak at 850 nm. Benefitting from the NIR complementation, the MAPbI3/F8IC:PTB7-Th composite film exhibits a broader absorption in the region of 400–1000 nm than pure MAPbI3 (400–780 nm), confirming the theoretical feasibility of fabricating UV-vis-NIR broadband photodetectors.
Fig. 2a shows the EQE spectra of perovskite/BHJ photodetectors measured at zero bias. The response spectrum of the photodetectors can be extended to 1000 nm, which is in accordance with the composite absorption range. The photoresponse provided by the BHJ is ideally complementary to that of halide perovskites, significantly enhancing the EQE spectra from 600 to 1000 nm for the MAPbI3 photodetectors. Encouragingly, the EQE value of 54% at 850 nm for the perovskite/BHJ photodetectors provides direct evidence that the charge carriers generated in the NIR region can be sufficiently collected by the electrodes. Fig. 2b displays the energy level diagram of the perovskite/BHJ photodetectors. In principle, a strictly matched energy level for electron and hole transport can enable good device performance. The NIR photogenerated holes may be extracted completely by MAPbI3 due to the proper alignment of the energy level. To deeply investigate the mechanism of the charge transport in the interface between the organic BHJ and perovskite, photoluminescence (PL) spectra of the films were measured as shown in Fig. 2c using excitation light at 380 nm. The PL intensity of F8IC:PTB7-Th/MAPbI3 decreases sharply compared with that of F8IC/MAPbI3, indicating that more electrons are extracted and transported through the films when mixing F8IC and PTB7-Th as the donor-acceptor BHJ46,47. The luminescence characteristics provide direct evidence that a more brilliant interface state and interlayer coupling is achieved between the MAPbI3 and F8IC:PTB7-Th layer and that the carriers can transfer effectively at the interface. The NIR photogenerated electrons will be collected by the cathode through the C60 electron transport layer, and the NIR photogenerated holes can be transported via perovskite to the ITO anode owing to the high hole mobility of MAPbI3. On the other hand, the UV-visible photogenerated electrons in the perovskite layer can be transported to the cathode through the organic BHJ layer and C60, with the photogenerated holes collected directly by the anode. This working photodetector mechanism ensures the effective detection of both UV-visible and NIR light, which provides theoretical guidance for broadband photodetection.
a EQE curves of the perovskite/organic BHJ hybrid photodetectors, pure perovskite and pure BHJ devices at zero bias and 70 Hz. b Band energy level alignment of the perovskite/organic BHJ hybrid photodetectors in this study. c PL of the film of MAPbI3 bound to different materials. d Responsivity of the corresponding perovskite/organic BHJ hybrid broadband photodetector.
Fig. 2d indicates the responsivity (R) curves of the photodetectors, which can be expressed from the EQE curve according to the equation
where h is Plank’s constant, c is the velocity of light, q is the absolute value of the electron charge, and λ is the light wavelength. The OIHP photodetectors exhibit a wide range from 300 nm to 1000 nm, and the peak in the NIR region can reach up to 0.37 AW−1 (870 nm) accompanied by approximately 0.43 AW−1 in the visible spectrum. Fig. 3a displays the dark current and photocurrent (under air mass 1.5 G illumination) density curve of the perovskite/organic BHJ photodetectors for voltages ranging between −0.3 and 1.2 V. The dark current density is as low as 3.4 × 10−8 A cm−2 at −0.1 V, suggesting a relatively low noise current and high sensitivity. As shown in Fig. 3b (inset), the noise current of the perovskite/BHJ photodetector is 3.6 × 10−13 A Hz−1 at 70 Hz (corresponding to the frequency of the EQE measurement). The actual detection capability of the photodetectors to monitor weak signals can be expressed by the specific detectivity (D*) determined by the responsivity and noise of the photodetectors, which can be calculated by the following equations:48
where A is the active layer area, in is the noise current, B is the bandwidth and NEP is the noise equivalent power. As shown in Fig. 3b, the hybrid perovskite/organic BHJ photodetectors exhibit a D* of 2.3 × 1011 Jones (cm Hz1/2 W−1) in the 870 nm NIR region, indicating the high performance of the fabricated broadband photodetector. Fig. 3c displays the trap density of states (tDOS) obtained by thermal admittance spectroscopy of two different devices48,49. The pure perovskite photodetectors possess a relatively large density of defect states of 3 × 1018 to 6 × 1018 m−3 eV−1 without the BHJ. However, the hybrid perovskite/BHJ device exhibits reduction in tDOS of nearly one order of magnitude. This result can perfectly verifies the low trap density of our broadband photodetectors and is important for a fast photodetector response.
a Photocurrent density (under air mass 1.5 G illumination) and dark current density curves of the broadband photodetectors. b Specific detectivity D* of the broadband photodetector at various light wavelengths under a bias voltage of −0.1 V. c Trap density of states curves of the perovskite/BHJ hybrid photodetectors. d Linear dynamic range of the broadband photodetectors under 475-nm LED illumination with various light intensities. The solid line represents linear fitting to the data. e LDR under 870-nm LED illumination. f Transient photocurrent curves of the broadband photodetector with device areas of 0.6 and 4.4 mm2. Inset: TPC curve of the ultrafast photodetectors with a smaller area of 0.1 mm2.
In practical photodetector applications, especially in an imaging system, a constant responsivity covering a large range of light intensities is critically significant for extracting the specific intensity of the detected light from the corresponding photocurrent. The linear weak-light response range is always characterized by the linear dynamic range (LDR), defined as an optical power margin within which the output photocurrent is linearly proportional to optical signal input:
where Pmax and Pmin are the upper and lower limits of the optical power in a particular range. Notably, a sufficiently large LDR means maintaining a constant responsivity from strong light to weak light conditions and is a precondition for weak light sensing. Fig. 3d, e show the LDR of photodetectors illuminated by LEDs with different wavelengths (475 nm and 870 nm). It can be clearly observed that the photocurrent density increases linearly for a dynamic light intensity ranging from 2.5 pW cm−2 to 5.6 mW cm−2 with the 475 nm LED and 1.5 pW cm−2 to 5.6 mW cm−2 with the 870 nm LED. This result corresponds to LDR values of 187 dB (475 nm) and 191 dB (870 nm), respectively, demonstrating the universal applicability of our device to various light sources, which is an essential prerequisite in a high-quality imaging system. Such a linear response may result from the excellent carrier transport property of the perovskite with the BHJ and the low electron trap density in the whole photodetector.
Finally, the response speed of this broadband photodetector is discussed in detail to completely characterize its performance parameters. The light response speed is a significant core performance parameter that determines the quality of photodetectors. A general method that is used to meausre an ultrafast response speed is the transient photocurrent (TPC)12,14. The photodetectors collect the pulsed light signal emitted by a pulsed laser, and then the photogenerated carriers can be driven by a built-in potential field or external voltage bias applied to the respective electrodes. Therefore, the response speed can be defined as the photocurrent decay time from the peak down to approximately 1/e after a single exponential fit to the TPC curve. Excited by a pulsed laser at a wavelength of 850 nm, the normalized TPC curves of the photodetectors with different active areas are shown in Fig. 3f. The response time of the perovskite/organic BHJ photodetectors is calculated to be 145 ns for a relatively large active area of 4.4 mm2 and 19 ns for small devices with an area of 0.6 mm2. This indicates that the response time is limited by the resistance-capacitance (RC) time constant, which is typically mixed with the carrier transit time, resulting in a deviation of the actual response speed.
where ttr is the carrier transit time and the RC time is the resistance-capacitance time constant of the circuit. In Fig. 3f (inset), to ensure the operation of the device, we reduced the area of the best performing device to 0.1 mm2 and obtained an ultrafast speed of 5.6 ns at zero bias. This ultrafast response is also commendable in the field of infrared photodetectors50. The outstanding response speed is due to a variety of causes, including the low trap density of the active layers, higher carrier mobility of the transport layers and suppression of the RC time. Herein, the RC time and transit time of the whole device are estimated based on the reported carrier mobility of the material and the actual thickness of each layer of the photodetectors. The calculation process is described in the supporting information, which obtains an RC time of 2.3 ns as calculated by Eqs. 1 and 2 in the SI, indicating the veracity of the practically measured response speed of 5.6 ns by the TPC method. The response time of the perovskite/organic BHJ photodetectors with an active area of 4.4 mm2 was also tested by the standard square wave method, and a rise/fall time of ~35/20 μs was obtained, as shown in Supplementary Fig. S2.
To further demonstrate the practical feasibility of the high-performance broadband photodetectors, we explored the functional role of the devices in imaging technology51,52,53,54. Generally, the photosensitive component in mature imaging fields such as digital cameras is a charge-coupled device (CCD), which can sense light and convert the image into digital form. From a functional point of view, the CCD components can be replaced with perovskite/BHJ broadband photodetectors to a certain extent. Herein, we adopt a high-performance imaging experiment to verify the high detectivity, broadband detection and ultrafast response of the OHIP photodetectors. The broadband photodetector scans the imaging target in two dimensions via the driving of the two-dimensional turntable, and the photocurrent of each pixel is recorded, avoiding the complicated structure of array imaging sensors. Considering that the response of the perovskite/BHJ photodetectors covers a wide wavelength range, including the NIR region, a blackbody-like, radiant heat source is employed as an imaging target. Detailed imaging devices and processes are shown in Fig. 4a. The light of the imaging target passes through the optical system, which can be focused on the sample by lenses. An 830-nm long-pass filter is placed in front of the lens to eliminate the effects of the band before 830 nm when NIR imaging alone is required. The current generated by the sample flows through resistance, and the voltage signal across the resistance can be output by the amplifier. The corresponding image is transmitted from the output voltage of each pixel to the computer via the gray code operator55. Fig. 4b shows the visible and NIR imaging results of the radiation source. The profile of the heat coil can be clearly captured in both the visible and NIR bands, and the change in the photocurrent intensity of the corresponding graphical position displays an obvious difference between the visible and NIR regions. This means that our device can completely distinguish the target in the environment and restore the display to a certain extent, highlighting the visible-NIR dual-waveband recognition imaging ability of perovskite broadband photodetectors. Moreover, for more realistic scenarios, we designed SITP letter graphics on an LED screen to verify the imaging capability of perovskite photodetectors for a more complex target. Using the same method, a high-quality image is achieved based on the corresponding voltage and position, which is illustrated in Fig. 4c. The pattern of letters with sharp boundaries is obtained, and simultaneously, the consistency of the position or distance between the images and objects proves the high fidelity of our photodetectors in the field of imaging. Here, we attribute the results to the high-dynamic-range imaging (HDRI) capability of the photodetectors, which is a crucial feature for high-quality imaging. When the high brightness and shadow areas of an actual image object have sharp contrast, image sensors with an inferior HDRI capability tend to obscure low-brightness targets with noise. The high brightness of a target will result in corresponding pixel saturation and even overflow, leading to an unclear image. In this study, the optical power exhibits a gradient from the background to the pattern body, meaning that the three parts of the “background - pattern edge - pattern body” have different optical powers. By successfully capturing this difference and demonstrating a significant imaging result, the preeminent HDRI capability of the perovskite photodetector is validated. The intensities of white light signals are clearly distinguished by the contrasting colors in Fig. 4c. The dynamic photocurrent intensity along the dotted line reveals the weak light extraction ability of the broadband photodetector and the realization of large-dynamic-range imaging. Benefiting from the excellent intrinsic performance of perovskite photodetectors with high sensitivity, low noise, and a large LDR, the difficulty of complex algorithm processing for high-quality imaging is greatly reduced. Moreover, relevant studies may further improve the imaging capabilities by adjusting the device size, adding pixels, and designing an array geometry.
a Schematic of the image scanning system and actual imaging for the OIHP photodetector. b Visible and NIR (with an 830-nm long-pass filter) imaging results of the heat coil. c Imaging of SITP (an abbreviation of Shanghai Institute of Technology and Physics) letter graphics under LED illumination. The white and blue lines in the figure represent the normalized photocurrent signal intensity.
In summary, we have demonstrated solution-processed UV-vis-NIR broadband photodetectors based on MAPbI3 and an organic BHJ, achieving broadband response spectra up to 1000 nm with an EQE peak of 54% in the NIR region. The response time of 5.6 ns represents the fastest speed of perovskite broadband photodetectors. Importantly, the large LDR of the photodetectors contributes to high-dynamic-range imaging, and the superior processing capacity of the photodetectors for actual imaging applications has practical application value in many fields. We believe that our results can inspire more fundamental or extended studies in the future.
Materials and methods
Materials
PbI2 (>99.99%), MAI, and PTAA were purchased from Xi’an p-OLED (Xi’an China). Bathocuproine (BCP) and fullerene (C60) were obtained from Lumtec (Taiwan, China). PTB7-Th was purchased from A One Material (Taiwan, China). These materials were used as received.
Device fabrication and measurements
All of the solutions were prepared at room temperature in an air environment. The PTAA was dissolved in toluene at a concentration of 2 mg mL−1. To fabricate the perovskite film, we adopted the common one-step method: PbI2 and MAI molar ratio 1:1 was dissolved in a 9:1 DMF (dimethylformamide):DMSO (dimethyl sulfoxide) mixed solution to make a MAPbI3 prosomatic solution with a concentration of 0.75 mol mL−1, and the solution was magnetically stirred at 60 °C until completely dissolved. For the organic donor-acceptor BHJ layer, F8IC:PTB7-Th were mixed and dissolved in chlorobenzene (CB) in a 1:1 proportion (the concentration of the mixed solution was 10 mg/mL). Then, the mixed solution was magnetically stirred at room temperature for 6–10 h.
The macrostructure of our photodetector is shown in Fig. 1b. The ITO substrates were ultrasonically cleaned by acetone and ethanol for 20 min and treated with UV ozone for 10 min. Then, a thin PTAA layer was simply spin-coated at 4000 r.p.m. for 40 s on the ITO surface, and the substrates were baked at 100 °C for 20 min. The MAPbI3 solution was deposited onto the prepared HTL films at 4000 r.p.m. for 40 s, cleaned by anhydrous toluene, and then annealed at 100 °C for 1 h to obtain a perovskite active layer. Subsequently, the hybrid F8IC:PTB7-Th solution was spin-coated on the perovskite film at 2000 rpm and annealed at 80 °C for 20 min. C60 (varying the thickness as required) and BCP (7 nm) were thermally evaporated by vapor deposition onto the organic BHJ layer. The evaporation rates was approximately 0.03 nm/s for C60, 0.03 nm/s for BCP, and 0.06 nm/s for Cu. Finally, the devices were completed by depositing a 100-nm Cu electrode. Thus far, a device with an effective area of 0.044 cm−2 has been completely manufactured.
A Shimadzu UV-1700 Pharma Spec UV spectrophotometer was used to measure the absorption spectra of the OIHP photodetectors. A Shimadzu RF 5301 fluorescence spectrophotometer was used to obtain the PL spectra of our devices. The external quantum efficiencies were measured by a Crowntech Q test Station 1000 AD measurement system. The J–V curves of our photodetectors in the dark and under illumination were obtained by a Keithley 2601 source meter. The incident light was provided by AM 1.5 G solar illumination with an Oriel 300 W solar simulator intensity of 100 mW cm−2. The noise current was analyzed by a ProPlus 9812D wafer-level 1/f noise characterization system. The measurement of the response speed was carried out by the transient photocurrent (TPC) method: A gold probe was used in the TPC measurement to minimize the external impact caused by the poor transmission of the electrical signals. The area of the pulsed beam was 10 mm2, larger than the device area. The rated power of the Ti:Sapphire femtosecond laser is 1 W, with a 1 kHz repetition rate. The pulsed Ti-sapphire femtosecond laser was prepared as the optical source, and the luminescence wavelength was set to 850 nm, with frequency doubling and a pulse duration of 150 fs. The photodetectors collected the pulsed light signal emitted by the pulsed laser, and then a 1 GHz oscilloscope with a 5 GHz sampling rate recorded the current pulse and generated the corresponding TPC curve. The response speed can be defined as the photocurrent decay time from the peak down to approximately 1/e after a single exponential fit to the TPC curve. To minimize the influence of the inductance of the whole circuit, the cables connecting the device and oscilloscope should be as short as possible and connected with a fast (6 GHz) bayonet Neill-Concelman connector. In addition, the measurement environment was kept at room temperature with no light sources other than the lasers. In addition, the environmental conditions of the photodetector performance measurement were room temperature (25 °C), 20% humidity, and normal pressure. The imaging process was generally conducted at room temperature (25 °C), a humidity of >45%, and an imaging time of >1 h.
References
Bi, C. et al. Understanding the formation and evolution of interdiffusion grown organolead halide perovskite thin films by thermal annealing. J. Mater. Chem. A 2, 18508–18514 (2014).
Fang, Y. J. et al. Highly narrowband perovskite single-crystal photodetectors enabled by surface-charge recombination. Nat. Photonics 9, 679–686 (2015).
De Arquer, F. P. G. et al. Solution-processed semiconductors for next-generation photodetectors. Nat. Rev. Mater. 2, 16100 (2017).
Koppens, F. H. L. et al. Photodetectors based on graphene, other two-dimensional materials and hybrid systems. Nat. Nanotechnol. 9, 780–793 (2014).
Maria, A. et al. Solution-processed infrared photovoltaic devices with >10% monochromatic internal quantum efficiency. Appl. Phys. Lett. 87, 213112 (2005).
Xie, Y. M. et al. Broad-spectral-response nanocarbon bulk-heterojunction excitonic photodetectors. Adv. Mater. 25, 3433–3437 (2013).
Long, M. S. et al. Palladium diselenide long-wavelength infrared photodetector with high sensitivity and stability. ACS Nano 13, 2511–2519 (2019).
Zhou, X. K., Yang, D. Z. & Ma, D. G. Extremely low dark current, high responsivity, all-Polymer photodetectors with spectral response from 300 nm to 1000 nm. Adv. Optical Mater. 3, 1570–1576 (2015).
Dong, R. et al. An ultraviolet-to-NIR broad spectral nanocomposite photodetector with gain. Adv. Optical Mater. 2, 549–554 (2014).
Simone, G. et al. Organic photodetectors and their application in large area and flexible image sensors: the role of dark current. Adv. Funct. Mater., https://doi.org/10.1002/adfm.201904205 (2019).
Dou, L. T. et al. Solution-processed hybrid perovskite photodetectors with high detectivity. Nat. Commun. 5, 5404 (2014).
Fang, Y. J. & Huang, J. S. Resolving weak light of sub-picowatt per square centimeter by hybrid perovskite photodetectors enabled by noise reduction. Adv. Mater. 27, 2804–2810 (2015).
Sutherland, B. R. et al. Sensitive, fast, and stable perovskite photodetectors exploiting interface engineering. ACS Photonics 2, 1117–1123 (2015).
Shen, L. et al. A self-powered, sub-nanosecond-response solution-processed hybrid perovskite photodetector for time-resolved photoluminescence-lifetime detection. Adv. Mater. 28, 10794–10800 (2016).
Shen, L. et al. A highly sensitive narrowband nanocomposite photodetector with gain. Adv. Mater. 28, 2043–2048 (2016).
Shen, L. et al. Integration of perovskite and polymer photoactive layers to produce ultrafast response, ultraviolet-to-near-infrared, sensitive photodetectors. Mater. Horiz. 4, 242–248 (2017).
Guo, F. W. et al. A nanocomposite ultraviolet photodetector based on interfacial trap-controlled charge injection. Nat. Nanotechnol. 7, 798–802 (2012).
Dong, R. et al. High-gain and low-driving-voltage photodetectors based on organolead triiodide perovskites. Adv. Mater. 27, 1912–1918 (2015).
Gong, X. et al. High-detectivity polymer photodetectors with spectral response from 300 nm to 1450 nm. Science 325, 1665–1667 (2009).
Zimmerman, J. D. et al. Porphyrin-tape/C60 organic photodetectors with 6.5% external quantum efficiency in the near infrared. Adv. Mater. 22, 2780–2783 (2010).
Yang, W. S. et al. Iodide management in formamidinium-lead-halide–based perovskite layers for efficient solar cells. Science 356, 1376–1379 (2017).
Tan, H. R. et al. Efficient and stable solution-processed planar perovskite solar cells via contact passivation. Science 355, 722–726 (2017).
Jeon, N. J. et al. A fluorene-terminated hole-transporting material for highly efficient and stable perovskite solar cells. Nat. Energy 3, 682–689 (2018).
Kagan, C. R., Mitzi, D. B. & Dimitrakopoulos, C. D. Organic-inorganic hybrid materials as semiconducting channels in thin-film field-effect transistors. Science 286, 945–947 (1999).
Kojima, A. et al. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. J. Am. Chem. Soc. 131, 6050–6051 (2009).
Heo, J. H. et al. Efficient inorganic-organic hybrid heterojunction solar cells containing perovskite compound and polymeric hole conductors. Nat. Photonics 7, 486–491 (2013).
Chen, Q. et al. Planar heterojunction perovskite solar cells via vapor-assisted solution process. J. Am. Chem. Soc. 136, 622–625 (2014).
Tan, Z. K. et al. Bright light-emitting diodes based on organometal halide perovskite. Nat. Nanotechnol. 9, 687–692 (2014).
Chin, X. Y. et al. Lead iodide perovskite light-emitting field-effect transistor. Nat. Commun. 6, 7383 (2015).
Adinolfi, V. et al. Fast and sensitive solution-processed visible-blind perovskite UV photodetectors. Adv. Mater. 28, 7264–7268 (2016).
Shrestha, S. et al. High-performance direct conversion X-ray detectors based on sintered hybrid lead triiodide perovskite wafers. Nat. Photonics 11, 436–440 (2017).
Ka, I. et al. High-performance nanotube-enhanced perovskite photodetectors. Sci. Rep. 7, 45543 (2017).
Wu, X. H. et al. Distinguishable detection of ultraviolet, visible, and infrared spectrum with high-responsivity perovskite-based flexible photosensors. Small 14, 1800527 (2018).
Kim, Y. C. et al. Printable organometallic perovskite enables large-area, low-dose X-ray imaging. Nature 550, 87–91 (2017).
Wu, G. et al. Perovskite/organic bulk-heterojunction integrated ultrasensitive broadband photodetectors with High near-infrared external quantum efficiency over 70%. Small 14, 1802349 (2018).
Wang, Y. K. et al. Perovskite/polymer hybrid thin films for high external quantum efficiency photodetectors with wide spectral response from visible to near-infrared wavelengths. Adv. Optical Mater. 5, 1700213 (2017).
Bi, D. Q. et al. Efficient luminescent solar cells based on tailored mixed-cation perovskites. Sci. Adv. 2, e1501170 (2016).
Park, N. G. et al. Towards stable and commercially available perovskite solar cells. Nat. Energy 1, 16152 (2016).
Correa-Baena, J. P. et al. Promises and challenges of perovskite solar cells. Science 358, 739–744 (2017).
Green, M. A., Ho-Baillie, A. & Snaith, H. J. The emergence of perovskite solar cells. Nat. Photonics 8, 506–514 (2014).
Saidaminov, M. I. et al. Perovskite photodetectors operating in both narrowband and broadband regimes. Adv. Mater. 28, 8144–8149 (2016).
Sun, H. X. et al. Ultrahigh-performance self-Powered flexible double-twisted fibrous broadband perovskite photodetector. Adv. Mater. 30, 1706986 (2018).
Dai, S. X. et al. Enhancing the performance of polymer solar cells via core engineering of NIR-absorbing electron acceptors. Adv. Mater. 30, 1706571 (2018).
Yao, H. F. et al. Design and synthesis of a low bandgap small molecule acceptor for efficient polymer solar cells. Adv. Mater. 28, 8283–8287 (2016).
Yao, H. F. et al. Design, synthesis, and photovoltaic characterization of a small molecular acceptor with an ultra-narrow band gap. Angew. Chem. Int. Ed. 56, 3045–3049 (2017).
Kim, J. et al. Excitation density dependent photoluminescence quenching and charge transfer efficiencies in hybrid perovskite/organic semiconductor bilayers. Adv. Energy Mater. 8, 1802474 (2018).
Wolff, C. M. et al. Reduced interface-mediated recombination for high open-circuit voltages in CH3NH3PbI3 solar cells. Adv. Mater. 29, 1700159 (2017).
Wei, H. T. et al. Trap engineering of CdTe nanoparticle for high gain, fast response, and low noise P3HT:CdTe nanocomposite photodetectors. Adv. Mater. 27, 4975–4981 (2015).
Fang, Y. J. et al. Large gain, low noise nanocomposite ultraviolet photodetectors with a linear dynamic range of 120 dB. Adv. Optical Mater. 2, 348–353 (2014).
Ullbrich, S. et al. Fast organic near-infrared photodetectors based on charge-transfer absorption. J. Phys. Chem. Lett. 8, 5621–5625 (2017).
Lee, S. J. et al. A monolithically integrated plasmonic infrared quantum dot camera. Nat. Commun. 2, 286 (2011).
Wilkins, S. W. et al. Phase-contrast imaging using polychromatic hard X-rays. Nature 384, 335–338 (1996).
Gu, L. L. et al. 3D Arrays of 1024-pixel image sensors based on lead halide perovskite nanowires. Adv. Mater. 28, 9713–9721 (2016).
Deng, W. et al. Aligned single-crystalline perovskite microwire arrays for high-performance flexible image sensors with long‐term stability. Adv. Mater. 28, 2201–2208 (2016).
Wang, P. et al. Arrayed van der Waals broadband detectors for dual-band detection. Adv. Mater. 29, 1604439 (2017).
Acknowledgements
The authors are grateful to the National Natural Science Foundation of China (Grant no. 61875072), Joint Fund of Pre-research for the Ministry of Equipment and Education (Grant no. 6141A02033409), International Cooperation and Exchange Project of Jilin Province (Grant no. 20170414002GH), Science and Technology Project of Education Department of Jilin Province (Grant no. JJKH20190011KJ), Key Research Project of Frontier Science of CAS (Grant no. QYZDB-SSW-JSC031), Fund of Shanghai Natural Science Foundation (Grant nos. 19XD1404100, 18ZR1445900, 19YF1454600, and 18ZR1445800), Open Fund of the State Key Laboratory of Integrated Optoelectronics (Grant no. IOSKL2019KF05), Special Grants from China Post-doctoral Science Foundation (pre-station) (Grant no. 2019TQ0333), and Fund of SITP Innovation Foundation (Grant no. CX-239, CX-292) for supporting this work.
Author information
Authors and Affiliations
Contributions
L.S. and W.H. conceived the concept and designed the experiments. C.L. and H.W. performed the device fabrication and characterization. C.L., H.W. and F.W. performed the data analysis. T.L. and X.Z. helped in the synthesis of F8IC. All authors contributed to writing and reviewing the manuscript.
Corresponding authors
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Supplementary information
41377_2020_264_MOESM1_ESM.docx
Supplementary Information for Ultrafast and Broadband Photodetectors Based on a Perovskite/Organic Bulk Heterojunction for Large-Dynamic-Range Imaging
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Li, C., Wang, H., Wang, F. et al. Ultrafast and broadband photodetectors based on a perovskite/organic bulk heterojunction for large-dynamic-range imaging. Light Sci Appl 9, 31 (2020). https://doi.org/10.1038/s41377-020-0264-5
Received:
Revised:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41377-020-0264-5
This article is cited by
-
Boosting performances of ZnO microwire homojunction ultraviolet self-powered photodetector by coupled interfacial engineering and plasmonic effects
Science China Materials (2024)
-
Highly efficient tunable photodetector with a bipolar response in van der Waals heterojunctions
Science China Technological Sciences (2024)
-
Interfacial passivation of CsPbI3 quantum dots improves the performance of hole-transport-layer-free perovskite photodetectors
Discover Nano (2023)
-
Perovskite single-pixel detector for dual-color metasurface imaging recognition in complex environment
Light: Science & Applications (2023)
-
Origami-inspired perovskite X-ray detector by printing and folding
npj Flexible Electronics (2023)