Abstract
The effects of temperature and molecular weight on the polymer dissolution rate were investigated by comparison of the numerical simulation with the experimental observations. The Fickian diffusion equation was modified to predict the non-Fickian behavior by considering the temperature and concentration dependence of diffusion coefficient for moving (swelling) polymer films caused by solvent incorporation. The polymer dissolution process was predicted using the polymer chain disentanglement mechanism, founded on the reptation theory. The temperature and polymer molecular weight dependence of dissolution rate was measured using the laser interferometer technique. As results of simultaion and observations for the dissolution of polystyrenes in ethylbenzene, the dissolution rate increased with increasing temperature and decreasing polymer molecular weight and there was linear relationship between them in logarithmic scale. The experimentally determined values of exponent a and b which indicate the dependence strength of molecular weight and temperature on the dissolution rate were very similar to those theoretically estimated.
Similar content being viewed by others
Article PDF
References
J. S. Papanu, D. S. Soane, and A. T. Bell, J. Appl. Polym. Sci., 38, 859 (1989).
N. A. Peppas, J. C. Wu, and E. D. Meerwall, Macromolecules, 27, 5626 (1994).
H.-R. Lee and Y.-D. Lee, Chem. Eng. Sci., 46, 1771 (1991).
M. F. Herman and S. F. Edwards, Macromolecules, 23, 3662 (1990).
L. Schlegel and W. Schnabel, J. Appl. Polym. Sci., 41, 1797 (1990).
P. J. Flory, “Principles of Polymer Chemistry,” Cornell University, Ithaca and London, 1971, pp 495–594.
P-G. de Gennes, “Scalling Concepts in Polymer Physics,” Cornell University Press, Ithaca and London, 1979, pp 219–230.
B. Carnahan, H. A. Luther, and J. O. Wilkes, “Applied Numerical Methods,” Wiley, New York, N.Y., 1989, Chapter 7.
W. H. Press, B. P. Flannery, S. A. Teukolsky, and W. T. Vetterling, “Numerical Recipes in C,” Cambridge University Press, New York, N.Y., 1988.
P. D. Krasicky, R. J. Groele, J. A. Jubinsky, and F. Rodriguez, Polym. Eng. Sci., 27, 282 (1987).
F. Rodriguez, P. D. Krasicky, and R. J. Groele, Sol. Stat. Technol., 28, 125 (1985).
P. D. Krasicky, R. J. Groele, and F. Rodriguez, Chem. Eng. Comm., 54, 279 (1987).
J. Brandrup and E. H. Immergut, Ed., “Polymer Handbook,” 2nd ed, Wiley, New York, N.Y., 1975, Section VII.
J. S. Vrentas, J. L. Duda, H.-C. Ling, and A.-C. Hou, J. Polym. Sci., Polym. Phys. Ed., 23, 289 (1985).
J. S. Vrentas and C.-H. Chu, J. Appl. Polym. Sci., 34, 587 (1987).
J. S. Vrentas, J. L. Duda, and H. T. Liu, J. Appl. Polym. Sci., 25, 1297 (1980).
J. Klein, “Encyclopedia of Polymer Science and Engineering,” 2nd ed, Wiley, New York, N.Y., 1987, Vol. 5.
W. W. Graessley, Adv. Polym. Sci., 16, 1 (1974).
L. H. Sperling, “Introduction to Physical Polymer Science,” 2nd ed, Wiley, New York, N.Y., 1992, p 482.
D. R. Lide, “Handbook of Organic Solvent,” CRC Press, Boca Raton, 1995, p 211.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Kong, B., Kwon, Y. & Kim, D. Theoretical and Experimental Analysis of Polymer Molecular Weight and Temperature Effects on the Dissolution Process of Polystyrene in Ethylbenzene. Polym J 29, 722–732 (1997). https://doi.org/10.1295/polymj.29.722
Issue Date:
DOI: https://doi.org/10.1295/polymj.29.722