Abstract
The viability of using oil palm trunk wood flour (OPWF), a by-product of the oil palm industry, as a filler in polypropylene (PP) was studied. The OPWF was compounded into polypropylene using a Brabender thermoplastics mixer and a twin screw compounder. Torque of PP/OPWF composite was compared to that of neat polypropylene. The result showed that the mixing torque of polypropylene increases by adding OPWF filler into it. Test specimens of the PP/OPWF composite at 30% filter content were prepared by injection moulding, their mechanical properties evaluated and compared to a commercial PP/talc composite. The tensil properties, flexual modulus, impact strength, and melt flow index of the PP/OPWF composite were decreased only by a small margin when compared to those of PP/talc. The PP/OPWF composite, on the other hand, has better heat deflection temperature value than PP/talc. The study shows that OPWF has a good potential to be used as an alternative filter for polypropylene. The OPWF used in this study was not treated with any coupling agent.
Similar content being viewed by others
Article PDF
References
M. Husin, Z. Z. Zawawi, and H. Abdul Halim, Proceedings of the National Symposium on Oil Palm By-products for Agro Based Industries, Malaysia PORIM, Bangi, 1985, p 8.
G. R. Lightsey, P. H. Short, and V. K. K. Sinha, Polym. Eng. Sci., 17, 305 (1977).
C. D. Han, T. H. Kwack, and H. L. Lou, J. App. Polym. Sci., 29, 2599 (1984).
D. M. Bigg, Polym. Comp., 8, 115 (1987).
M. Bramuzzo, A. Savadori, and D. Bacci, Polym. Comp., 6, 1 (1985).
L. Jilken, G. Malhammar, and R. Selden, Polym. Test., 10, 329 (1991).
T. Kawaleski and A. Galeski, J. Appl. Polym. Sci., 32, 2919 (1986).
A. Weber, Plast. Rubber Process. Appl., 14, 65 (1990).
R. G. Raj, B. V. Kokta, G. Groleau, and C. Daneault, Plast. Rubber Process Appl., 11, 215 (1989).
S. N. Maiti and R. Subrarao, Intern. J. Polym. Mater., 15, 1 (1991).
A. W. Bosshard and H. P. Schlumpf, “Plastics Additives Handbook,” R. Gachter and H. Muller, ed., Carl Hanser Verlag, Munich, 1987.
L. T. Chew, K. C. Khoo, S. Rahim, and S. Khazirah, Research Pamphlet, 107, 54 (1991).
Q. Fu and G. Wang, Polym. Eng. Sci., 32, 94 (1992).
S. N. Maiti and B. H. Lopez, J. Appl. Polym. Sci., 44, 353 (1992).
A. M. Railey, C. D. Paynter, P. M. McGenity, and J. M. Adams, Plast. Rubber Process. Appl., 14, 85 (1990).
M. Y. Ahmad Fuad and J. Mustafah, Intern. J. Polym. Mater., 19, 75 (1993).
G. E. Padawar and N. Beecher, Polym. Eng. Sci., 10, 185 (1970).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Zaini, M., Ismail, Z., Fuad, M. et al. Application of Oil Palm Wood Flour as Fillers in Polypropylene. Polym J 26, 637–642 (1994). https://doi.org/10.1295/polymj.26.637
Issue Date:
DOI: https://doi.org/10.1295/polymj.26.637