Protocol | Published:

Lab-scale production of anhydrous diazomethane using membrane separation technology

Nature Protocols volume 12, pages 21382147 (2017) | Download Citation

Abstract

Diazomethane is among the most versatile and useful reagents for introducing methyl or methylene groups in organic synthesis. However, because of its explosive nature, its generation and purification by distillation are accompanied by a certain safety risk. This protocol describes how to construct a configurationally simple tube-in-flask reactor for the in situ on-demand generation of anhydrous diazomethane using membrane separation technology and thus avoiding distillation methods. The described reactor can be prepared from commercially available parts within 1 h. In this system, solutions of Diazald and aqueous potassium hydroxide are continuously pumped into a spiral of membrane tubing, and diazomethane is generated upon mixing of the two streams. Pure diazomethane gas diffuses out of the reaction mixture through the membrane tubing (made of gas-permeable Teflon AF-2400). As the membrane tubing is immersed in a flask filled with the substrate solution, diazomethane is instantly consumed, which minimizes the risk of diazomethane accumulation. For this protocol, the reaction of diazomethane with benzoic acid on a 5-mmol scale has been selected as a model reaction and is described in detail. Methyl benzoate was isolated in an 88–90% yield (597–611 mg) within 3 h.

Access optionsAccess options

Rent or Buy article

Get time limited or full article access on ReadCube.

from$8.99

All prices are NET prices.

References

  1. 1.

    The preparation and reactions of diazomethane. Aldrichimica Acta 16, 3–10 (1983).

  2. 2.

    , , & Synthesis of novel tridentate pyrazolebipyridine ligands for co-complexes as redox-couples in dye-sensitized solar cells. Tetrahedron 71, 8551–8556 (2015).

  3. 3.

    , , , & Improved Arndt-Eistert synthesis of α-diazoketones requiring minimal diazomethane in the presence of calcium oxide as acid scavenger. J. Org. Chem. 75, 5760–5763 (2010).

  4. 4.

    , & Homologation reaction of ketones with diazo compounds. Chem. Rev. 116, 2937–2981 (2016).

  5. 5.

    & Efficient Arndt–Eistert synthesis of selective 5-HT7 receptor antagonist SB-269970. Synth. Commun. 39, 3243–3253 (2009).

  6. 6.

    & Cyclopropanation of alkenes with C-1. in Science of Synthesis, C-1 Building Blocks in Organic Synthesis 1 (ed. Van Leeuwen, P.W.N.M.) 259–280 (Georg Thieme Verlag, 2014).

  7. 7.

    , , & From 2000 to mid-2010: a fruitful decade for the synthesis of pyrazoles. Chem. Rev. 111, 6984–7034 (2011).

  8. 8.

    Carcinogenic action of diazomethane and of nitroso-N-methyl urethane. Nature 188, 420–421 (1960).

  9. 9.

    Diazomethane poisoning: report of a case suggesting sensitization reaction. J. Occup. Med. 6, 91–92 (1964).

  10. 10.

    & Diazomethane. Org. Synth. 36, 16–19 (1956).

  11. 11.

    National Institute for Occupational Safety and Health. Diazomethane (1995; accessed 21 August 2017).

  12. 12.

    , , & Synthesis of cyclopropanated [2.2.1] heterobicycloalkenes: an improved procedure. Synth. Commun. 46, 55–62 (2016).

  13. 13.

    & A method for concurrent diazomethane synthesis and substrate methylation in a 96-sample format. Nat. Protoc. 5, 1619–1626 (2010).

  14. 14.

    Convenient apparatus for the generation of small amounts of diazomethane. J. Chromatogr. 303, 193–196 (1984).

  15. 15.

    & Iron-catalyzed cyclopropanation in 6 M KOH with in situ generation of diazomethane. Science 335, 1471–1474 (2012).

  16. 16.

    & Enabling technologies for diazomethane generation and transformation. Aldrichimica Acta 49, 57–66 (2016).

  17. 17.

    , & Taming hazardous chemistry in flow: the continuous processing of diazo and diazonium compounds. Chem. Eur. J. 21, 2298–2308 (2015).

  18. 18.

    & Diazo compounds in continuous-flow technology. ChemSusChem 8, 245–250 (2015).

  19. 19.

    , & Continuous-flow technology—a tool for the safe manufacturing of active pharmaceutical ingredients. Angew. Chem. Int. Ed. Engl. 54, 6688–6729 (2015).

  20. 20.

    & Development of a continuous process for the industrial generation of diazomethane. Org. Process Res. Dev. 6, 884–892 (2002).

  21. 21.

    , & Continuous process for diazomethane from an N-methyl-N-nitrosoamine and from methylurea through N-methyl-N-nitrosoureas. US Patent 5854405 (1998).

  22. 22.

    , , & Making diazomethane accessible for R&D and industry: generation and direct conversion in a continuous micro-reactor set-up. Green Chem. 10, 41–43 (2008).

  23. 23.

    , & Scalable in situ diazomethane generation in continuous-flow reactors. Org. Process Res. Dev. 16, 1146–1149 (2012).

  24. 24.

    , , & Continuous in situ generation, separation, and reaction of diazomethane in a dual-channel microreactor. Angew. Chem. Int. Ed. Engl. 50, 5952–5955 (2011).

  25. 25.

    , & Continuous flow generation and reactions of anhydrous diazomethane using a Teflon AF 2400 tube-in-tube reactor. Org. Lett. 16, 5590–5593 (2013).

  26. 26.

    , , & Flow chemistry: intelligent processing of gasliquid transformations using a tube-in-tube reactor. Acc. Chem. Res. 48, 349–362 (2015).

  27. 27.

    , , , & Continuous flow synthesis of α-haloketones: essential building blocks of antiretroviral agents. J. Org. Chem. 79, 1555–1562 (2014).

  28. 28.

    et al. Automated library synthesis of cyclopropyl boronic esters employing diazomethane in a tube-in-tube flow reactor. Org. Biomol. Chem. 14, 6591–6595 (2016).

  29. 29.

    , , & Laboratory-scale membrane reactor for the generation of anhydrous diazomethane. J. Org. Chem. 81, 5814–5823 (2016).

  30. 30.

    , , , & One-pot synthesis of α-haloketones employing a membrane-based semi batch diazomethane generator. J. Flow Chem. 6, 211–217 (2016).

  31. 31.

    , & Flow ozonolysis using a semipermeable Teon AF-2400 membrane to effect gas-liquid contact. Org. Lett. 12, 1596–1598 (2010).

  32. 32.

    , , & PTFE-membrane flow reactor for aerobic oxidation reactions and its application to alcohol oxidation. Org. Process Res. Dev. 19, 858–864 (2015).

  33. 33.

    Managing solids in microreactors for the upstream continuous processing of fine chemicals. Org. Process Res. Dev. 16, 870–887 (2012).

  34. 34.

    et al. Sequential nitration/hydrogenation protocol for the synthesis of triaminophloroglucinol: safe generation and use of an explosive intermediate under continuous-flow conditions. Org. Process Res. Dev. 18, 1360–1366 (2014).

  35. 35.

    et al. Photodimerization of maleic anhydride in a microreactor without clogging. Org. Process Res. Dev. 14, 405–410 (2010).

  36. 36.

    , , & KMnO4-mediated oxidation as a continuous flow process. Org. Lett. 12, 3618–3621 (2010).

  37. 37.

    & p-Tolylsulfonylmethylnitrosamide. Org. Synth. 34, 96–100 (1954).

Download references

Acknowledgements

We thank B. Gutmann for help with the assembly of the tube-in-flask reactor and the workshop of the Institute of Chemistry at the University of Graz for constructing parts of the reactor (adaptions of the safety cap and production of the screw cap).

Author information

Affiliations

  1. Institute of Chemistry, University of Graz, NAWI Graz, Graz, Austria.

    • Doris Dallinger
    •  & C Oliver Kappe
  2. Research Center Pharmaceutical Engineering GmbH (RCPE), Graz, Austria.

    • C Oliver Kappe

Authors

  1. Search for Doris Dallinger in:

  2. Search for C Oliver Kappe in:

Contributions

D.D. and C.O.K. designed the experiments. D.D. carried out the experiments. Both authors contributed to the writing of the manuscript.

Competing interests

The authors declare no competing financial interests.

Corresponding author

Correspondence to C Oliver Kappe.

About this article

Publication history

Published

DOI

https://doi.org/10.1038/nprot.2017.046

Comments

By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.