Skip to main content

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

Observation of the nonlinear phase shift due to single post-selected photons

Abstract

Over the past years, much effort has gone towards generating interactions between two optical beams so strong that they could be observed at the level of individual photons1,2,3. Interactions this strong, beyond opening up a new regime in optics4, could lead to technologies such as all-optical quantum information processing5,6. However, the extreme weakness of photon–photon scattering has hindered any attempt to observe such interactions at the level of single particles. Here we present an implementation of a strong optical nonlinearity using electromagnetically induced transparency7, and a direct measurement of the resulting nonlinear phase shift for single post-selected photons. We show that the observed phase shift depends not only on the incident intensity of the (coherent-state) input signal, but also in a discrete fashion on whether 0 or 1 photons are detected at the output. We believe that this constitutes the first direct measurement of the cross-phase shift due to single photons, whose presence or absence is established based on a discrete detection event. It opens a door to future studies of nonlinear optics in the quantum regime, and potential applications in areas such as quantum information processing.

Main

Modern optical physics has revolved principally about two poles: nonlinear optics, where rich effects are generated through the interactions of photons with one another, but which because of the weakness of those interactions typically manifests itself only for pulses containing billions of photons; and quantum optics, where phenomena such as entanglement have been widely studied, but where photon–photon interactions are negligible. In fact, it has been well known in quantum optics since the Nobel Prize-winning work of R. Glauber that, in the linear regime, the classical and quantum theories of electromagnetism make identical predictions (except in the presence of nonclassical sources of light—which themselves rely on nonlinear effects)8,9. It has therefore long been a dream to move into the realm of ‘quantum nonlinear optics’, where sufficiently strong interactions could create a complex many-body interacting quantum system in the context of optics. Such interactions could enable the production and detection of novel entangled states, including few-photon bound states4,10, as well as new architectures for non-demolition measurement of photon number11,12,13, quantum teleportation14, low-light-level switching3 and quantum logic gates5. Decades ago, important steps in this direction were taken in the realm of cavity quantum electrodynamics (QED) (ref. 15), leading for instance to major advances in the study of entanglement16,17,18,19, and more recent significant developments in the context of superconducting qubits20,21. Greatly enhanced interactions for photons have recently been observed, using electromagnetically induced transparency and slow light1, microstructured fibres22, atoms in hollow fibres23, a single atom strongly coupled to a micro-resonator cavity24, atoms or other impurities near tapered fibres25,26 or bottle resonators27. Most recently, the application of ‘Rydberg blockades’28,29,30 has enabled huge interaction strengths, already leading to the observation of strongly modified quantum statistics10,31,32,33,34,35. Sum-frequency generation of two heralded single photons has also been demonstrated36. In parallel, there has been some controversy about the applicability of such strong interactions to quantum logic due to fundamental noise limits37,38,39 and suggestions that intermediate-strength nonlinearities might be a powerful approach6,40. These proposals put forward a way to use interactions between single photons and probe pulses containing many photons to implement a near-deterministic controlled-phase gate. The requirement for these schemes is simply to have a detectable cross-phase shift (XPS) imparted by a single photon on a classical beam, rather than a nonlinear phase shift of the order of π radians as in the earlier proposals. At the present time, however, the nonlinear phase shift written by a single photon on a probe beam has to our knowledge never been reported, and previous experiments have been performed with classical pulses with average photon numbers of the order of a few hundred41 in free space, or as low as 16 or 0.1 in a hollow-core fibre filled with atomic vapour23 or a nonlinear photonic-crystal fibre22, respectively.

Here we demonstrate that by illuminating a sample of atoms with a weak coherent state, but post-selecting on subsequent detection of a photon at the far side of the sample, we can observe the nonlinear effect of that one additional photon on a probe beam. Similar ‘intensity-field correlations’ were previously used to enhance quantum effects in a cavity-QED system42,43,44. Using electromagnetically induced transparency in a gas of laser-cooled 85Rb atoms, we generate a nonlinear phase shift of 18 μrad per photon, and unequivocably demonstrate the contribution due to individual post-selected photons. The sample was illuminated with weak coherent-state pulses with as few as 0.5 photons on average, and post-selection allowed us to subsequently determine whether a given pulse contained (approximately) 0 or 1 photons. Our data unambiguously exhibit a discrete dependence of the observed phase shift on the post-selection outcome. This represents the first direct measurement of the XPS due to a post-selected single photon.

We use an atomic level scheme1 based on electromagnetically induced transparency7 (EIT), which allows very strong near-resonant interactions. EIT is a coherent atomic effect in which different excitation pathways interfere destructively, eliminating linear absorption and simultaneously producing sharp dispersive slopes; see the inset of Fig. 1. To establish EIT, two phase-coherent laser fields (probe and coupling) form a Λ-system, addressing a common excited state. When the two-photon resonance condition is satisfied—that is, their respective detunings are equal—the medium becomes transparent to these fields and each experiences a modified refractive index profile. The presence of an additional ‘signal’ field inside the medium serves to a.c.-Stark shift one of the ground states of the Λ-system, pulling the probe and coupling fields out of two-photon resonance. As a result, the probe field experiences a change in refractive index, acquiring a phase shift that is proportional to the slope of this steep dispersive feature. For low signal power, the induced Stark shift is linear in signal intensity; the resulting probe phase shift is, therefore, proportional to the number of photons in the signal pulse. Measurement of this phase shift provides information about the number of signal photons present in the interaction region.

Figure 1: Schematic of the experimental set-up.
figure1

Counter-propagating probe and signal beams are focused to a waist of 13 ± 1 μm inside a cloud of laser-cooled 85Rb atoms confined in a magneto-optical trap (MOT). High reflectivity beamsplitters (BS; 90% reflectivity) are used to collect the signal and probe beams after the interaction. A collimated coupling beam, propagating perpendicular to both probe and signal beams, creates a 2 MHz EIT window for the probe (see the inset). The amplitude and phase of the probe are measured using frequency-domain interferometry. The single-photon detection events on the SPCM are registered as tags in the amplitude of the probe. The inset shows the level scheme used.

Figure 1 shows a schematic of the experimental set-up as well as the level scheme. A cloud of laser-cooled 85Rb atoms serves as the nonlinear optical medium, with the probe and coupling beams passing through orthogonal to each other. Short signal pulses are sent counter-propagating to the probe and both beams are collected by highly reflective beamsplitters after the interaction. A single-photon counting module (SPCM) is used to detect the signal pulses whereas the probe beam is detected by a fast avalanche photodiode (APD), operating in the linear regime; see the ‘Methods’ section for the details of the probe phase measurement.

We first measure the XPS for a range of signal pulse energies to determine the size of the per-photon effect. Figure 2 plots the XPS on the probe field versus the average number of photons per signal pulse. The phase shift grows linearly for low photon numbers and a fit yields a slope of 13 ± 1 μrad per photon. There is a saturation at high photon numbers that occurs when the induced a.c.-Stark shift becomes comparable to or larger than the half-width of the EIT window. The lowest energy per pulse that we use here corresponds to an average of one photon per pulse, which is the lowest pulse energy ever used for cross-phase modulation in free space.

Figure 2: XPS versus average photon number per pulse.
figure2

The nonlinear phase shift depends linearly on the photon number at lower intensities. A fit to the low-photon-number data yields a slope of 13 ± 1 μrad per photon whereas the deviation at higher photon numbers arises due to higher-order nonlinearities. The signal centre detuning is −10 MHz, the on-resonance OD in the absence of the coupling is 2, and the EIT window width is 2 MHz. The inset shows a typical linear phase profile (blue circles) and optical density (red squares) as seen by the probe. The vertical lines indicate our definition of the EIT window throughout this paper (namely, the full-width at half-maximum of the transparency. The error bars represent the standard deviation of the mean.

Although in the measurement described above we have observed the XPS due to signal pulses with an average photon number of 1, approximately 40% of the pulses contain no photons at all; and about 25% contain multiple photons. To observe the quantized effect of individual photons, we send in even weaker pulses—containing only one-half a photon on average—and trigger on subsequent detection of a single photon at an SPCM. These so-called ‘click’ events occur only a small fraction of the time, due to the weak signal pulses as well as detector inefficiency. Because of this finite efficiency, the absence of a click does not preclude the possibility that there had, in fact, been a photon in the interaction region. Nevertheless—and neglecting for the moment background counts and multi-photon events—it can be shown that the best estimate possible of the photon number in the interaction region increases by exactly one when the detector fires, regardless of its efficiency. An intuitive way to understand this is via the common model of an inefficient detector as equivalent to a beamsplitter, separating ‘detected’ and ‘undetected’ modes. Splitting a quasi-classical (coherent) state into two modes generates a product state with no correlations; thus the best estimate of the number of undetected photons is independent of how many detected photons are observed. Therefore, when one ‘click’ event occurs, our estimate of the total photon number is greater (by that one photon) than when no click occurs. Comparing cases when the SPCM fires with cases where it does not thus provides a measure of the effect of a single additional photon.

When background and multi-photon events are included, one can still calculate the shift in inferred average photon number due to a ‘click’ event, and it remains close to (but no longer exactly equal to) 1; see the Supplementary Information for details. This difference depends on the incident average photon number, |α| 2, the overall collection and detection efficiency, η, and the background photon detection probability, Pb. When the probability of clicks due to signal photons is much higher than those due to background photons—but still much lower than 1 (Pb η |α| 2 1)—the difference is close to 1. However, at low incident photon numbers false clicks due to the background photons cause the inferred difference to be smaller than 1. On the other hand, at high incident photon numbers, the difference can be larger than 1 owing to the contribution of multi-photon events to the single-click measurements (when non-photon-resolving detectors are used). Figure 3 plots the inferred average photon number in the interaction region, ninf, versus the average incident photon number, |α| 2, for click and no-click events. In this figure, the circles show the inferred photon number for the parameters used in the experiment. The average photon numbers in the interaction region for these data points are lower than the corresponding incident photon numbers because of the finite signal absorption (75% transmission).

Figure 3: Inferred (ninf) versus average photon number in the interaction region.
figure3

The overall collection efficiency is assumed to be 20% and the background click rate is taken to be 10% for solid and dotted lines. The circles show the photon number values inferred for the data points in Fig. 4 for no-click (red) and click (blue) events. The inferred photon numbers depend on the overall detection deficiency, η. As we varied this efficiency for different data points, we indicate it (in %) next to each circle. The dotted green lines show the photon number which would be inferred were a number-resolving detector used. The solid blue line could also be obtained from a weighted average of the dotted lines with non-zero number of clicks. The dashed blue line shows where the difference in the inferred photon number for click- and no-click events is equal to 1.

We can separate out the instances in which the SPCM detected a photon (the ‘click’ cases) from those in which no click was registered by the detector. This allows us to measure the nonlinear phase shift of the probe in the two cases separately (see Fig. 4). For 0.5 incident signal photons per pulse, the inferred average photon number in the interaction region for no-click events is roughly 0.3, whereas it is approximately 1 for click events; see the square shaded in green. The phase shift measured for the no-click cases is statistically indistinguishable from zero (2 ± 3 μrad), whereas the click events result in a non-zero phase shift of −13 ± 6 μrad, consistent with the per-photon nonlinear phase shift of −13 ± 1 μrad inferred from the fit to the data in Fig. 2.

Figure 4: Post-selected single-photon XPS.
figure4

Most notably, for an average incident photon number of 0.5 (green-shaded region), the XPS for no-click and click events are 2 ± 3 and −13 ± 6 μrad, respectively, which definitively shows the effect of a single post-selected photon. For the other data points, the average incident photon number and/or the signal centre detuning is varied. Taking all the data points together, the magnitude of the post-selected single-photon XPS is −18 ± 4 μrad. The inset shows the post-selected XPS versus ninf(2π × 18 MHz)/Δs, inferred average photon number corrected for the variable signal detuning. The solid line has a slope of −14 ± 1 μrad per 18 MHz-detuned photon. The EIT window width is 2 MHz and the on-resonance OD in the absence of the coupling is 3. The data in the region shaded in blue are tests for systematics, as explained in the text. The error bars represent the standard deviation of the mean.

For the remaining data points, the average incident signal photon number and/or the centre detuning of signal pulses was varied. The most significant feature is that the nonlinear phase shifts for click events are always larger in absolute size than those for the no-click cases. The magnitude of the phase difference between click and no-click events averaged over all data points—that is, the nonlinear phase shift due to a post-selected single photon—is −15 ± 3 μrad (−18 ± 4 μrad after correcting for finite background; see the Supplementary Information for details).

To confirm that the observed effect is not due to systematics, we have also taken data in the absence of signal pulses or atoms, or with large signal detunings. The data in the region shaded in blue illustrates these checks for systematics. The most important feature to highlight is that the click- and no-click probe phase shifts for all systematic checks are equal to within the error bars.

The post-selected XPS data has a linear dependence on inferred average photon number. The inset of Fig. 4 plots all the data points versus inferred average photon number corrected for the variable signal detuning (see Supplementary Information). The data agree well with the XPS per photon expected from our earlier measurements corrected for signal detuning and different optical densities, shown as a solid line.

The theoretical prediction for the magnitude of the XPS, given the parameters of our experiment, is 13 μrad based on the model presented in ref. 45 (see Supplementary Information for more details). The values we measured in our experiment are in very good agreement with the theoretical value.

There are a number of important directions for extensions to this work. One is to repeat the experiment with signal light with different quantum statistics, in which case the dependence of phase shift on detection events will change; in particular, for bunched light, a larger phase shift per detection event is to be expected. With anti-bunched sources46, of course, post-selection will no longer be required. Moving into the regime of single-shot resolvability required for quantum logic gates based on weak optical nonlinearities6,40 will require using a tighter beam focus, higher optical density, and narrower EIT windows, most likely combined with more sophisticated level schemes, such as ones in which both probe and signal beams propagate in EIT windows47, or ones which rely on the strong interaction between Rydberg atoms31,32,33,34. Once in this regime, it will be possible to experimentally address the questions38,39 related to the effects of back-action noise on the signal.

Methods

Atom preparation.

The atoms are prepared in a magneto-optical trap using three beams and their retro-reflections along with a magnetic field gradient of 20 G cm−1 on the axis of the quadrupole coil. Each of the three beams has a ‘trapping’ (2.5 cm diameter) and a ‘repumper’ (1 cm diameter) component. The trapping beam is tuned to 20 MHz below the cycling transition F = 3 → F′ = 4 and the repumper is tuned close to resonance on the F = 2 → F′ = 3 transition to keep the population in the trapping ground state. The beams and the magnetic field gradient are turned off every 22 ms, leaving the atoms to freely expand and allowing them to be probed for 1.5 ms, as explained in Supplementary Fig. 4.

Probe phase measurement.

The nonlinear effect we are interested in is a change in the probe refractive index, which is linear in the signal photon number and manifests itself as a phase shift of the probe field. To measure this probe phase shift, frequency-domain interferometry is used48,49. The probe beam is comprised of two different frequency components, which co-propagate through the atomic cloud. One frequency component is tuned on resonance with the F = 2 → F′ = 3 transition, whereas the other is +100 MHz detuned, serving as a phase reference; any phase or amplitude change due to the atoms appears as a phase or amplitude change of the resulting 100 MHz beating signal. The probe beam is detected on a fast avalanche photodiode; demodulation of the resultant electrical signal at 100 MHz allows us to extract the phase and amplitude change experienced by the on-resonance probe field. The analysis bandwidth for the demodulation is 2 MHz, which is matched to the EIT window for optimum signal-to-noise ratio. A stable 10 MHz clock is used to generate a 100 MHz signal to act as the reference for the modulation and demodulation. An important advantage of using frequency-domain interferometry and demodulation is that the measurement is insensitive to any source of variation that does not have a component at 100 MHz.

Although the signal pulses are only 40 or 100 ns in duration, the XPS lasts for approximately 300 ns, as determined by the response time of the EIT medium. We have detailed this transient behaviour in refs 45, 50. Precise timing of the signal pulses with respect to our measurement cycle trigger allows us to locate the XPS signal. As a phase reference, we measure the probe phase in 200 ns windows directly before and after the passage of the signal pulse. The XPS is then defined as the difference between the average probe phase over the 300 ns effect and the averaged reference phase.

Probe phase noise.

We measure a single-shot phase uncertainty of 50 mrad (there are approximately 18,000 probe photons per measurement window before the interaction, one sixth of which reach the detector and give rise to a shot noise of 26 mrad). The extra noise in this experiment is due to electrical, digitizer and other technical noise sources. To reach the μrad-level phase resolution we averaged over roughly 100 million shots; see ‘Data collection’ section for more details.

Probe and coupling fields.

Our master laser is locked 30 MHz below the F = 2 → F′ = 3 transition of the D2 line in 85Rb. A portion of this light is frequency-shifted using an acousto-optic modulator (AOM) driven at +130 MHz to produce the off-resonance component of the probe, which is then passed through a second AOM driven at −100 MHz to create the on-resonance component. These two components are then combined on a beamsplitter, forming the probe beat signal. Another portion of the master laser is modulated using an electro-optic modulator (EOM) driven at 3 GHz. This modulated light is used as the seed for injection-locking a diode laser; locking to the lower side band of the modulation produces a coupling beam that is phase-locked to the probe, a necessary condition for establishing EIT. This coupling beam passes through a third AOM, which serves to frequency shift it onto resonance with the F = 3 → F′ = 3 transition, as well as to shutter the coupling light on and off in sync with the atomic duty cycle. The width of the EIT feature is linear in the coupling intensity and is measured to be 2 MHz for all the data taken for this paper. The major source of ground state dephasing in our set-up is a Doppler broadening which is estimated to be around 300 kHz. Owing to this dephasing process, the optical density as seen by the probe beam in the presence of the on-resonance coupling is 0.7 ± 0.1. The optical density is defined as OD = −ln(Ptransmitted(Δp)/Pincident), where P is the optical power of the probe beam. Pincident is the transmitted power in the absence of atoms and Ptransmitted is the transmitted power when the probe passes through the atoms; Δp is the detuning of the probe. Given the slope of the EIT feature in our experiment we estimate c/vg = 1 × 105, where vg is the probe group velocity. We use π and σ+ polarizations for the coupling and probe fields, respectively.

The powers of the probe components are 15 nW on resonance and 180 nW off resonance, and the coupling power is 20 μW.

Signal pulses.

A portion of the injection-locked laser light is split off to produce the signal pulses. An AOM is used to frequency shift the light close to the F = 3 → F′ = 4 transition as well as to create short pulses (40 ns or 100 ns full-width at half-maximum). The temporal profiles of the signal pulses are measured on an avalanche photodiode. By integrating the pulse power over time, the average energy, and therefore the average photon number, of each signal pulse can be measured. The polarization of the signal light is σ+.

Single-photon detection.

The signal pulses are collected into a multimode fibre and detected on an SPCM. Other than the signal photons, any stray light which leaks into the signal collection can result in clicks. We use gate signals with durations matching the signal pulses to reject background photons. The residual probability of background counts is 13% for 100 ns pulses and 6% for 40 ns signal pulses. Most of these result from the near-resonant scattering of the probe and coupling beams from the atoms. The overall collection and detection efficiency is around 20%, and for higher incident photon numbers more attenuation is added to keep the total click rate around 20–30%. The details of the tagging procedure are explained in the Supplementary Information.

To reduce the background photon rate for cases of incident average photon number of 0.5 and 1, the signal pulse duration was chosen to be 40 ns, whereas it had been 100 ns for the data taken for higher signal power. One might expect this change to make the signal pulses more intense, and therefore make the nonlinear phase shift more than twice as large. However, we have previously shown45,50 that because of the bandwidth mismatch between the EIT window (2 MHz here) and the signal pulses, the peak phase shift nearly saturates, and we expect an enhancement of only 1.5. Therefore, given the size of our phase measurement uncertainty, the two values are expected not to be statistically different.

The inferred average photon number difference between click and no-click cases is slightly different from unity owing to the effects of background counts, multiple-photon events and detection efficiency. To calculate the nonlinear phase shift per post-selected single photon, the measured phase differences are divided by the values of the inferred average photon number difference.

Data collection.

For each data point, we took approximately 300 million shots over 14 h, 90 million of which resulted in clicks at the SPCM. Because of our tagging procedure 90 million shots were discarded, and out of the remaining shots we observed 60 million click events and 150 million no-click events.

Focus size.

The waists of the probe and signal beams inside the cloud are 13 ± 1 μm, corresponding to a (two-sided) Rayleigh range of roughly 1.4 mm. The choice of this focus size is to ensure that the Rayleigh range of the beams matches the size of the cloud. Focusing the beams tighter than the size of the cloud would be detrimental because it would reduce the interaction length and increase the probe phase shot noise (the intensity of the probe is limited and fixed by the saturation intensity of atoms). Also, focusing the beams any less tightly would produce a smaller intensity for given signal pulse energy, thereby decreasing the size of the nonlinear effect. The coupling beam waist is 0.5 mm.

References

  1. 1

    Schmidt, H. & Imamoglu, A. Giant Kerr nonlinearities obtained by electromagnetically induced transparency. Opt. Lett. 21, 1936–1938 (1996).

    ADS  Article  Google Scholar 

  2. 2

    Harris, S. E. & Hau, L. V. Nonlinear optics at low light levels. Phys. Rev. Lett. 82, 4611–4614 (1999).

    ADS  Article  Google Scholar 

  3. 3

    Harris, S. E. & Yamamoto, Y. Photon switching by quantum interference. Phys. Rev. Lett. 81, 3611–3614 (1998).

    ADS  Article  Google Scholar 

  4. 4

    Deutsch, I. H., Chiao, R. Y. & Garrison, J. C. Diphotons in a nonlinear Fabry–Perot resonator: Bound states of interacting photons in an optical quantum wire. Phys. Rev. Lett. 69, 3627–3630 (1992).

    ADS  Article  Google Scholar 

  5. 5

    Milburn, G. Quantum optical Fredkin gate. Phys. Rev. Lett. 62, 2124–2127 (1989).

    ADS  Article  Google Scholar 

  6. 6

    Nemoto, K. & Munro, W. J. Nearly deterministic linear optical controlled-NOT gate. Phys. Rev. Lett. 93, 250502 (2004).

    ADS  Article  Google Scholar 

  7. 7

    Fleischhauer, M., Imamoglu, A. & Marangos, J. Electromagnetically induced transparency: Optics in coherent media. Rev. Mod. Phys. 77, 633–673 (2005).

    ADS  Article  Google Scholar 

  8. 8

    Glauber, R. J. Coherent and incoherent states of the radiation field. Phys. Rev. 131, 2766–2788 (1963).

    ADS  MathSciNet  Article  Google Scholar 

  9. 9

    Glauber, R. J. The quantum theory of optical coherence. Phys. Rev. 130, 2529–2539 (1963).

    ADS  MathSciNet  Article  Google Scholar 

  10. 10

    Firstenberg, O. et al. Attractive photons in a quantum nonlinear medium. Nature 502, 71–75 (2013).

    ADS  Article  Google Scholar 

  11. 11

    Imoto, N., Haus, H. A. & Yamamoto, Y. Quantum nondemolition measurement of the photon number via the optical Kerr effect. Phys. Rev. A 32, 2287–2292 (1985).

    ADS  Article  Google Scholar 

  12. 12

    Braginsky, V. B., Vorontsov, Y. I. & Thorne, K. S. Quantum nondemolition measurements. Science 209, 547–557 (1980).

    ADS  Article  Google Scholar 

  13. 13

    Grangier, P., Levenson, J. A. & Poizat, J.-P. Quantum non-demolition measurements in optics. Nature 396, 537–542 (1998).

    ADS  Article  Google Scholar 

  14. 14

    Vitali, D., Fortunato, M. & Tombesi, P. Complete quantum teleportation with a Kerr nonlinearity. Phys. Rev. Lett. 85, 445–448 (2000).

    ADS  Article  Google Scholar 

  15. 15

    Turchette, Q. A., Hood, C. J., Lange, W., Mabuchi, H. & Kimble, H. J. Measurement of conditional phase shifts for quantum logic. Phys. Rev. Lett. 75, 4710–4713 (1995).

    ADS  MathSciNet  Article  Google Scholar 

  16. 16

    Raimond, J.-M., Brune, M. & Haroche, S. Manipulating quantum entanglement with atoms and photons in a cavity. Rev. Mod. Phys. 73, 565–582 (2001).

    ADS  MathSciNet  Article  Google Scholar 

  17. 17

    Guerlin, C. et al. Progressive field-state collapse and quantum non-demolition photon counting. Nature 448, 889–893 (2007).

    ADS  Article  Google Scholar 

  18. 18

    Gleyzes, S. et al. Quantum jumps of light recording the birth and death of a photon in a cavity. Nature 446, 297–300 (2007).

    ADS  Article  Google Scholar 

  19. 19

    Rauschenbeutel, A. et al. Step-by-step engineered multiparticle entanglement. Science 288, 2024–2028 (2000).

    ADS  Article  Google Scholar 

  20. 20

    Wallraff, A. et al. Strong coupling of a single photon to a superconducting qubit using circuit quantum electrodynamics. Nature 431, 162–167 (2004).

    ADS  Article  Google Scholar 

  21. 21

    Devoret, M. & Schoelkopf, R. Superconducting circuits for quantum information: An outlook. Science 339, 1169–1174 (2013).

    ADS  Article  Google Scholar 

  22. 22

    Matsuda, N., Shimizu, R., Mitsumori, Y., Kosaka, H. & Edamatsu, K. Observation of optical-fibre Kerr nonlinearity at the single-photon level. Nature Photon. 3, 95–98 (2009).

    ADS  Article  Google Scholar 

  23. 23

    Venkataraman, V., Saha, K. & Gaeta, A. L. Phase modulation at the few-photon level for weak-nonlinearity-based quantum computing. Nature Photon. 7, 138–141 (2013).

    ADS  Article  Google Scholar 

  24. 24

    O’Shea, D., Junge, C., Volz, J. & Rauschenbeutel, A. Fiber-optical switch controlled by a single atom. Phys. Rev. Lett. 111, 193601 (2013).

    ADS  Article  Google Scholar 

  25. 25

    Hendrickson, S., Pittman, T. & Franson, J. Nonlinear transmission through a tapered fiber in rubidium vapor. J. Opt. Soc. Am. B 26, 267–271 (2009).

    ADS  Article  Google Scholar 

  26. 26

    Spillane, S. et al. Observation of nonlinear optical interactions of ultralow levels of light in a tapered optical nanofiber embedded in a hot rubidium vapor. Phys. Rev. Lett. 100, 233602 (2008).

    ADS  Article  Google Scholar 

  27. 27

    Volz, J., Scheucher, M., Junge, C. & Rauschenbeutel, A. Nonlinear π phase shift for single fibre-guided photons interacting with a single resonator-enhanced atom. Nature Photon. 8, 965–970 (2014).

    ADS  Article  Google Scholar 

  28. 28

    Urban, E. et al. Observation of Rydberg blockade between two atoms. Nature Phys. 5, 110–114 (2009).

    ADS  Article  Google Scholar 

  29. 29

    Pritchard, J. D. et al. Cooperative atom–light interaction in a blockaded Rydberg ensemble. Phys. Rev. Lett. 105, 193603 (2010).

    ADS  Article  Google Scholar 

  30. 30

    Saffman, M., Walker, T. G. & Mølmer, K. Quantum information with Rydberg atoms. Rev. Mod. Phys. 82, 2313–2363 (2010).

    ADS  Article  Google Scholar 

  31. 31

    Parigi, V. et al. Observation and measurement of interaction-induced dispersive optical nonlinearities in an ensemble of cold Rydberg atoms. Phys. Rev. Lett. 109, 233602 (2012).

    ADS  Article  Google Scholar 

  32. 32

    Peyronel, T. et al. Quantum nonlinear optics with single photons enabled by strongly interacting atoms. Nature 488, 57–60 (2012).

    ADS  Article  Google Scholar 

  33. 33

    Chen, W. et al. All-optical switch and transistor gated by one stored photon. Science 341, 768–770 (2013).

    ADS  Article  Google Scholar 

  34. 34

    Baur, S., Tiarks, D., Rempe, G. & Dürr, S. Single-photon switch based on Rydberg blockade. Phys. Rev. Lett. 112, 073901 (2014).

    ADS  Article  Google Scholar 

  35. 35

    Gorniaczyk, H., Tresp, C., Schmidt, J., Fedder, H. & Hofferberth, S. Single-photon transistor mediated by interstate Rydberg interactions. Phys. Rev. Lett. 113, 053601 (2014).

    ADS  Article  Google Scholar 

  36. 36

    Guerreiro, T. et al. Nonlinear interaction between single photons. Phys. Rev. Lett. 113, 173601 (2014).

    ADS  Article  Google Scholar 

  37. 37

    Shapiro, J. H. Single-photon Kerr nonlinearities do not help quantum computation. Phys. Rev. A 73, 062305 (2006).

    ADS  Article  Google Scholar 

  38. 38

    Shapiro, J. H. & Razavi, M. Continuous-time cross-phase modulation and quantum computation. New J. Phys. 9, 16 (2007).

    ADS  Article  Google Scholar 

  39. 39

    Gea-Banacloche, J. Impossibility of large phase shifts via the giant Kerr effect with single-photon wave packets. Phys. Rev. A 81, 043823 (2010).

    ADS  Article  Google Scholar 

  40. 40

    Munro, W. J., Nemoto, K. & Spiller, T. P. Weak nonlinearities: A new route to optical quantum computation. New J. Phys. 7, 137 (2005).

    ADS  Article  Google Scholar 

  41. 41

    Lo, H.-Y. et al. Electromagnetically-induced-transparency-based cross-phase-modulation at attojoule levels. Phys. Rev. A 83, 041804 (2011).

    ADS  Article  Google Scholar 

  42. 42

    Smith, W. P., Reiner, J. E., Orozco, L. A., Kuhr, S. & Wiseman, H. M. Capture and release of a conditional state of a cavity QED system by quantum feedback. Phys. Rev. Lett. 89, 133601 (2002).

    ADS  Article  Google Scholar 

  43. 43

    Foster, G. T., Smith, W. P., Reiner, J. E. & Orozco, L. A. Third-order correlations in cavity quantum electrodynamics. J. Opt. B 4, S281 (2002).

    ADS  Google Scholar 

  44. 44

    Foster, G. T., Smith, W. P., Reiner, J. E. & Orozco, L. A. Time-dependent electric field fluctuations at the subphoton level. Phys. Rev. A 66, 033807 (2002).

    ADS  Article  Google Scholar 

  45. 45

    Feizpour, A., Dmochowski, G. & Steinberg, A. M. Short-pulse cross-phase modulation in an electromagnetically-induced-transparency medium. Preprint at http://arXiv.org/abs/1406.0245 (2014).

  46. 46

    Wolfgramm, F. et al. Bright filter-free source of indistinguishable photon pairs. Opt. Express 16, 18145–18151 (2008).

    ADS  Article  Google Scholar 

  47. 47

    Wang, Z.-B., Marzlin, K.-P. & Sanders, B. C. Large cross-phase modulation between slow copropagating weak pulses in Rb87. Phys. Rev. Lett. 97, 063901 (2006).

    ADS  Article  Google Scholar 

  48. 48

    Chen, Y.-F., Liu, Y.-C., Tsai, Z.-H., Wang, S.-H. & Ite, A. Y. Beat-note interferometer for direct phase measurement of photonic information. Phys. Rev. A 72, 033812 (2005).

    ADS  Article  Google Scholar 

  49. 49

    Lo, H.-Y., Su, P.-C., Cheng, Y.-W., Wu, P.-I. & Chen, Y.-F. Femtowatt-light-level phase measurement of slow light pulses via beat-note interferometer. Opt. Express 18, 18498–18505 (2010).

    ADS  Article  Google Scholar 

  50. 50

    Dmochowski, G. et al. Observation of EIT-enhanced cross-phase modulation in the short-pulse regime. Preprint at http://arXiv.org/abs/1506.07051 (2015).

Download references

Acknowledgements

This work was funded by NSERC, CIFAR and QuantumWorks. We would like to thank A. Hayat for useful discussions, and A. Stummer for designing and building several electronic devices for this experiment.

Author information

Affiliations

Authors

Contributions

All authors have contributed to the design of the experiment, interpretation of the results, and preparation and revisions of the manuscript.

Corresponding author

Correspondence to Amir Feizpour.

Ethics declarations

Competing interests

The authors declare no competing financial interests.

Supplementary information

Supplementary information

Supplementary information (PDF 525 kb)

Rights and permissions

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Feizpour, A., Hallaji, M., Dmochowski, G. et al. Observation of the nonlinear phase shift due to single post-selected photons. Nature Phys 11, 905–909 (2015). https://doi.org/10.1038/nphys3433

Download citation

Further reading

Search

Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing