Review Article | Published:

Polymer solar cells

Nature Photonics volume 6, pages 153161 (2012) | Download Citation

Abstract

Recent progress in the development of polymer solar cells has improved power-conversion efficiencies from 3% to almost 9%. Based on semiconducting polymers, these solar cells are fabricated from solution-processing techniques and have unique prospects for achieving low-cost solar energy harvesting, owing to their material and manufacturing advantages. The potential applications of polymer solar cells are broad, ranging from flexible solar modules and semitransparent solar cells in windows, to building applications and even photon recycling in liquid-crystal displays. This Review covers the scientific origins and basic properties of polymer solar cell technology, material requirements and device operation mechanisms, while also providing a synopsis of major achievements in the field over the past few years. Potential future developments and the applications of this technology are also briefly discussed.

Access optionsAccess options

Rent or Buy article

Get time limited or full article access on ReadCube.

from$8.99

All prices are NET prices.

References

  1. 1.

  2. 2.

    & Electronic Processes in Organic Crystals and Polymers 2nd edn (Oxford Univ., 1999).

  3. 3.

    The path to ubiquitous and low-cost organic electronic appliances on plastic. Nature 428, 911–918 (2004).

  4. 4.

    Multilayer organic photovoltaic elements. US patent 4, 164,431 (1979).

  5. 5.

    2-layer organic photovoltaic cell. Appl. Phys. Lett. 48, 183–185 (1986).

  6. 6.

    et al. Spin-coated small molecules for high performance solar cells. Adv. Energy Mater. 1, 771–775 (2011).

  7. 7.

    , & Polymer-fullerene bulk-heterojunction solar cells. Adv. Mater. 21, 1323–1338 (2009).

  8. 8.

    et al. Preparation and characterization of fulleroid and methanofullerene derivatives. J. Org. Chem. 60, 532–538 (1995).

  9. 9.

    , , & Photoinduced electron-transfer from a conducting polymer to Buckminsterfullerene. Science 258, 1474–1476 (1992).

  10. 10.

    , & Doping effect of Buckminsterfullerene in conducting polymer — change of absorption-spectrum and quenching of luminescence. Solid State Commun. 82, 249–252 (1992).

  11. 11.

    , , & Semiconducting polymers (as donors) and Buckminsterfullerene (as acceptor) — photoinduced electron-transfer and heterojunction devices. Synth. Met. 59, 333–352 (1993).

  12. 12.

    , & P-I-N like behavior in 3-layered organic solar-cells having a co-deposited interlayer of pigments. J. Appl. Phys. 72, 3781–3787 (1992).

  13. 13.

    , , , & Polymer photovoltaic cells — enhanced efficiencies via a network of internal donor–acceptor heterojunctions. Science 270, 1789–1791 (1995).

  14. 14.

    et al. Efficient photodiodes from interpenetrating polymer networks. Nature 376, 498–500 (1995).

  15. 15.

    et al. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends. Nature Mater. 4, 864–868 (2005).

  16. 16.

    , , , & Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology. Adv. Funct. Mater. 15, 1617–1622 (2005).

  17. 17.

    , & Small molecular weight organic thin-film photodetectors and solar cells. J. Appl. Phys. 93, 3693–3723 (2003).

  18. 18.

    & Toward high-performance polymer solar cells: The Importance of Morphology Control. Macromolecules 40, 1353–1362 (2007).

  19. 19.

    Nanostructured organic–inorganic hybrid solar cells. MRS Bull. 34, 95–100 (2009).

  20. 20.

    , , , & Photovoltaic devices with a low band gap polymer and CdSe nanostructures exceeding 3% efficiency. Nano Lett. 10, 239–242 (2010).

  21. 21.

    , , , & Nanostructured organic and hybrid solar cells. Adv. Mater. 23, 1810–1828 (2011).

  22. 22.

    & Conducting polymer formed of poly(2-methoxy-5-(2′-ethylhexyloxy)-p-phenylene vinylene). US patent 5,189,136 (1993).

  23. 23.

    , , , & Effect of LiF/metal electrodes on the performance of plastic solar cells. Appl. Phys. Lett. 80, 1288–1290 (2002).

  24. 24.

    et al. Efficient methano[70]fullerene/MDMO-PPV bulk heterojunction photovoltaic cells. Angew. Chem. Int. Ed. 42, 3371–3375 (2003).

  25. 25.

    , & Soluble and processable regioregular poly(3-hexylthiophene) for thin film field-effect transistor applications with high mobility. Appl. Phys. Lett. 69, 4108–4110 (1996).

  26. 26.

    , & Effects of postproduction treatment on plastic solar cells. Adv. Funct. Mater. 13, 85–88 (2003).

  27. 27.

    et al. High photovoltaic performance of a low-bandgap polymer. Adv. Mater. 18, 2884–2889 (2006).

  28. 28.

    et al. Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols. Nature Mater. 6, 497–500 (2007).

  29. 29.

    , & A low-bandgap poly(2,7-carbazole) derivative for use in high-performance solar cells. Adv. Mater. 19, 2295–2300 (2007).

  30. 30.

    et al. Bulk heterojunction solar cells with internal quantum efficiency approaching 100%. Nature Photon. 3, 297–302 (2009).

  31. 31.

    et al. Development of new semiconducting polymers for high performance solar cells. J. Am. Chem. Soc. 131, 56–57 (2009).

  32. 32.

    et al. Highly efficient solar cell polymers developed via fine-tuning of structural and electronic properties. J. Am. Chem. Soc. 131, 7792–7799 (2009).

  33. 33.

    et al. Polymer solar cells with enhanced open-circuit voltage and efficiency. Nature Photon. 3, 649–653 (2009).

  34. 34.

    , , , & Fluorine substituted conjugated polymer of medium band gap yields 7% efficiency in polymer–fullerene solar cells. J. Am. Chem. Soc. 133, 4625–4631 (2011).

  35. 35.

    et al. Development of fluorinated benzothiadiazole as a structural unit for a polymer solar cell of 7% efficiency. Angew. Chem. Int. Ed. 50, 2995–2998 (2011).

  36. 36.

    et al. Improving device efficiency of polymer/fullerene bulk heterojunction solar cells through enhanced crystallinity and reduced grain boundaries induced by solvent additives. Adv. Mater. 23, 3315–3319 (2011).

  37. 37.

    et al. A robust inter-connecting layer for achieving high performance tandem polymer solar cells. Adv. Mater. 23, 3465–3470 (2011).

  38. 38.

    et al. Efficient, air-stable bulk heterojunction polymer solar cells using MoOx as the anode interfacial layer. Adv. Mater. 23, 2226–2230 (2011).

  39. 39.

    et al. Bulk heterojunction solar cells using thieno[3,4-c]pyrrole-4,6-dione and dithieno3,2-b:2′,3′-d]silole copolymer with a power conversion efficiency of 7.3%. J. Am. Chem. Soc. 133, 4250–4253 (2011).

  40. 40.

    et al. Dithienogermole as a fused electron donor in bulk heterojunction solar cells. J. Am. Chem. Soc. 133, 10062–10065 (2011).

  41. 41.

    , & Synthesis of conjugated polymers for organic solar cell applications. Chem. Rev. 109, 5868–5923 (2009).

  42. 42.

    & Development of semiconducting polymers for solar energy harvesting. Polym. Rev. 50, 454–473 (2010).

  43. 43.

    et al. Design rules for donors in bulk-heterojunction solar cells — towards 10 % energy-conversion efficiency. Adv. Mater. 18, 789–794 (2006).

  44. 44.

    et al. Chlorophyll-layer-inserted poly(3-hexyl-thiophene) solar cell having a high light-to-current conversion efficiency up to 1.48%. Appl. Phys. Lett. 87, 123102 (2005).

  45. 45.

    , , , & Self-orienting head-to-tail poly(3-alkylthiophenes) — new insights on structure–property relationships in conducting polymers. J. Am. Chem. Soc. 115, 4910–4911 (1993).

  46. 46.

    , , & Tuning redox behavior and emissive wavelength of conjugated polymers by p–n diblock structures. J. Am. Chem. Soc. 120, 11808–11809 (1998).

  47. 47.

    et al. Fluorene-based low band-gap copolymers for high performance photovoltaic devices. Appl. Phys. Lett. 84, 1653–1655 (2004).

  48. 48.

    et al. A new donor–acceptor–donor polyfluorene copolymer with balanced electron and hole mobility. Adv. Funct. Mater. 17, 3836–3842 (2007).

  49. 49.

    , , , & A polybenzo[1,2-b:4,5-b']dithiophene derivative with deep HOMO level and its application in high-performance polymer solar cells. Angew. Chem. Int. Ed. 49, 1500–1503 (2010).

  50. 50.

    , , , & On the origin of the open-circuit voltage of polymer–fullerene solar cells. Nature Mater. 8, 904–909 (2009).

  51. 51.

    & A new class of semiconducting polymers for bulk heterojunction solar cells with exceptionally high performance. Acc. Chem. Res. 43, 1227–1236 (2010).

  52. 52.

    , & Alternate donor–acceptor small-band-gap semiconducting polymers — polysquaraines and polycroconaines. Synth. Met. 55, 299–306 (1993).

  53. 53.

    & Low optical bandgap polythiophenes by an alternating donor/acceptor repeat unit strategy. J. Am. Chem. Soc. 119, 5065–5066 (1997).

  54. 54.

    et al. Development of new conjugated polymers with donor–pi-bridge–acceptor side chains for high performance solar cells. J. Am. Chem. Soc. 131, 13886–13887 (2009).

  55. 55.

    , , , & Synthesis, characterization, and photovoltaic properties of a low band gap polymer based on silole-containing polythiophenes and 2,1,3-benzothiadiazole. J. Am. Chem. Soc. 130, 16144–16145 (2008).

  56. 56.

    et al. Silicon atom substitution enhances interchain packing in a thiophene-based polymer system. Adv. Mater. 22, 371–375 (2010).

  57. 57.

    et al. Indacenodithiophene and quinoxaline-based conjugated polymers for highly efficient polymer solar cells. Chem. Mater. 23, 2289–2291 (2011).

  58. 58.

    et al. Tetrathienoanthracene-based copolymers for efficient solar cells. J. Am. Chem. Soc. 133, 3284–3287 (2011).

  59. 59.

    , , , & Bulk heterojunction photovoltaic active layers via bilayer interdiffusion. Nano Lett. 11, 2071–2078 (2011).

  60. 60.

    et al. Synthetic control of structural order in N-alkylthieno[3,4-c]pyrrole-4,6-dione-based polymers for efficient solar cells. J. Am. Chem. Soc. 132, 7595–7597 (2010).

  61. 61.

    et al. Fullerene bisadducts for enhanced open-circuit voltages and efficiencies in polymer solar cells. Adv. Mater. 20, 2116–2119 (2008).

  62. 62.

    et al. Organic photovoltaic devices comparising fullerenes and derivatives thereof. US patent 20080319207A1 (2008).

  63. 63.

    et al. Endohedral fullerenes for organic photovoltaic devices. Nature Mater. 8, 208–212 (2009).

  64. 64.

    , , & Indene-C(60) bisadduct: A new acceptor for high-performance polymer solar cells. J. Am. Chem. Soc. 132, 1377–1382 (2010).

  65. 65.

    , & 6.5% efficiency of polymer solar cells based on poly(3-hexylthiophene) and indene-C(60) bisadduct by device optimization. Adv. Mater. 22, 4355–4358 (2010).

  66. 66.

    , , & Benzo[1,2-b:4,5-b']dithiophene-dioxopyrrolothiophen copolymers for high performance solar cells. Chem. Commun. 46, 4997–4999 (2010).

  67. 67.

    et al. A thieno[3,4-c]pyrrole-4,6-dione-based copolymer for efficient solar cells. J. Am. Chem. Soc. 132, 5330–5331 (2010).

  68. 68.

    et al. Efficient polymer solar cells based on the copolymers of benzodithiophene and thienopyrroledione. Chem. Mater. 22, 2696–2698 (2010).

  69. 69.

    et al. 2.5% efficient organic plastic solar cells. Appl. Phys. Lett. 78, 841–843 (2001).

  70. 70.

    et al. Influence of solvent mixing on the morphology and performance of solar cells based on polyfluorene copolymer/fullerene blends. Adv. Funct. Mater. 16, 667–674 (2006).

  71. 71.

    et al. 'Solvent annealing' effect in polymer solar cells based on poly(3-hexylthiophene) and methanofullerenes. Adv. Funct. Mater. 17, 1636–1644 (2007).

  72. 72.

    et al. Nanostructure dependence of field-effect mobility in regioregular poly(3-hexylthiophene) thin film field effect transistors. J. Am. Chem. Soc. 128, 3480–3481 (2006).

  73. 73.

    et al. Nanoscale morphology of high-performance polymer solar cells. Nano Lett. 5, 579–583 (2005).

  74. 74.

    , , , & 'Columnlike' structure of the cross-sectional morphology of bulk heterojunction materials. Nano Lett. 9, 230–234 (2009).

  75. 75.

    & Electron tomography. Mater. Today 7, 32–40 (December 2004).

  76. 76.

    , , & Three-dimensional nanoscale organization of bulk heterojunction polymer solar cells. Nano Lett. 9, 507–513 (2009).

  77. 77.

    et al. Morphology evolution via self-organization and lateral and vertical diffusion in polymer: Fullerene solar cell blends. Nature Mater. 7, 158–164 (2008).

  78. 78.

    et al. Vertical phase separation in poly(3-hexylthiophene): Fullerene derivative blends and its advantage for inverted structure solar cells. Adv. Funct. Mater. 19, 1227–1234 (2009).

  79. 79.

    et al. Substrate-dependent interface composition and charge transport in films for organic photovoltaics. Appl. Phys. Lett. 94, 233303 (2009).

  80. 80.

    , , , & Phase-sensitive neutron reflectometry measurements applied in the study of photovoltaic films. J. Chem. Phys. 133, 074902 (2010).

  81. 81.

    et al. Depletion of PCBM at the cathode interface in P3HT/PCBM thin films as quantified via neutron reflectivity measurements. Adv. Mater. 22, 2444–2447 (2010).

  82. 82.

    et al. Correlation between structural and optical properties of composite polymer/fullerene films for organic solar cells. Adv. Funct. Mater. 15, 1193–1196 (2005).

  83. 83.

    , , , & Molecular characterization of organic electronic films. Adv. Mater. 23, 319–337 (2011).

  84. 84.

    , , & Interface investigation and engineering — achieving high performance polymer photovoltaic devices. J. Mater. Chem. 20, 2575–2598 (2010).

  85. 85.

    , , , & Transition metal oxides as the buffer layer for polymer photovoltaic cells. Appl. Phys. Lett. 88, 0735080 (2006).

  86. 86.

    , , , & P-type semiconducting nickel oxide as an efficiency-enhancing anode interfacial layer in polymer bulk-heterojunction solar cells. Proc. Natl Acad. Sci. USA 105, 2783–2787 (2008).

  87. 87.

    et al. Enhanced efficiency in plastic solar cells via energy matched solution processed NiOx interlayers. Adv. Energy Mater. 1, 813–820 (2011).

  88. 88.

    , & High-performance and highly durable inverted organic photovoltaics embedding solution-processable vanadium oxides as an interfacial hole-transporting layer. Adv. Mater. 23, 3859–3863 (2011).

  89. 89.

    , & Enhanced electron injection in organic electroluminescence devices using an Al/LiF electrode. Appl. Phys. Lett. 70, 152–154 (1997).

  90. 90.

    , , , & Photoelectron spectroscopy of the contact between the cathode and the active layers in plastic solar cells: The role of LiF. Jpn. J. Appl. Phys. 44, 3695–3701 (2005).

  91. 91.

    Enhanced efficiency and durability of organic electroluminescent devices by inserting a thin insulating layer at the Alq3/cathode interface. Synth. Met. 91, 125–127 (1997).

  92. 92.

    , , & Aluminum based cathode structure for enhanced electron injection in electroluminescent organic devices. Appl. Phys. Lett. 73, 1185–1187 (1998).

  93. 93.

    et al. New architecture for high-efficiency polymer photovoltaic cells using solution-based titanium oxide as an optical spacer. Adv. Mater. 18, 572–576 (2006).

  94. 94.

    , , & The use of ZnO as optical spacer in polymer solar cells: theoretical and experimental study. Appl. Phys. Lett. 91, 113520 (2007).

  95. 95.

    et al. Air-stable polymer electronic devices. Adv. Mater. 19, 2445–2449 (2007).

  96. 96.

    , , , & Doping of the metal oxide nanostructure and its influence in organic electronics. Adv. Funct. Mater. 19, 1241–1246 (2009).

  97. 97.

    , , , & Polymer solar cells that use self-assembled-monolayer-modified ZnO/metals as cathodes. Adv. Mater. 20, 2376–2382 (2008).

  98. 98.

    , & Water/alcohol soluble conjugated polymers as highly efficient electron transporting/injection layer in optoelectronic devices. Chem. Soc. Rev. 39, 2500–2521 (2010).

  99. 99.

    , , & Vertically integrated electronic circuits via a combination of self-assembled polyelectrolytes, ink-jet printing, and electroless metal plating processes. Langmuir 18, 8142–8147 (2002).

  100. 100.

    et al. Simultaneous enhancement of open-circuit voltage, short-circuit current density, and fill factor in polymer solar cells. Adv. Mater. 23, 4636–4643 (2011).

  101. 101.

    Fabrication and processing of polymer solar cells: A review of printing and coating techniques. Sol. Energy Mater. Sol. C. 93, 394–412 (2009).

  102. 102.

    , , , & Efficient inverted polymer solar cells. Appl. Phys. Lett. 88, 253503 (2006).

  103. 103.

    , , , & Highly efficient inverted polymer solar cell by low temperature annealing of Cs2CO3 interlayer. Appl. Phys. Lett. 92, 173303 (2008).

  104. 104.

    , , , & Inverted bulk-heterojunction organic photovoltaic device using a solution-derived ZnO underlayer. Appl. Phys. Lett. 89, 143517 (2006).

  105. 105.

    et al. Highly efficient inverted organic photovoltaics using solution based titanium oxide as electron selective contact. Appl. Phys. Lett. 89, 233517 (2006).

  106. 106.

    , , , & High efficiency double heterojunction polymer photovoltaic cells using highly ordered TiO2 nanotube arrays. Appl. Phys. Lett. 91, 152111 (2007).

  107. 107.

    , , & ZnO nano-ridge structure and its application in inverted polymer solar cell. Org. Electron. 10, 1473–1477 (2009).

  108. 108.

    , , , & Solution-processable graphene oxide as an efficient hole transport layer in polymer solar cells. ACS Nano 4, 3169–3174 (2010).

  109. 109.

    et al. 40% efficient metamorphic GaInP/GaInAs/Ge multijunction solar cells. Appl. Phys. Lett. 90, 183516 (2007).

  110. 110.

    , & Double and triple junction polymer solar cells processed from solution. Appl. Phys. Lett. 90, 143512 (2007).

  111. 111.

    et al. Efficient tandem polymer solar cells fabricated by all-solution processing. Science 317, 222–225 (2007).

  112. 112.

    et al. Highly efficient tandem polymer photovoltaic cells. Adv. Mater. 22, 380–383 (2010).

  113. 113.

    , , & Stretchable organic solar cells. Adv. Mater. 23, 1771–1775 (2011).

  114. 114.

    , & Polarizing organic photovoltaics. Adv. Mater. 23, 4193–4198 (2011).

  115. 115.

    , , , & Photonic color filters integrated with organic solar cells for energy harvesting. ACS Nano 5, 7055–7060 (2011).

  116. 116.

    et al. High efficiency polymer solar cells with long operating lifetimes. Adv. Energy Mater. 1, 491–494 (2011).

  117. 117.

  118. 118.

    et al. Tandem polymer solar cells featuring a spectrally matched low-bandgap polymer. Nature Photon. 6, 180–185 (2012).

Download references

Acknowledgements

The authors would like to thank L. Dou for valuable discussion and K. Cha for proofreading the manuscript.

Author information

Affiliations

  1. Department of Materials Science & Engineering, University of California, Los Angeles, California 90095, USA

    • Gang Li
    • , Rui Zhu
    •  & Yang Yang

Authors

  1. Search for Gang Li in:

  2. Search for Rui Zhu in:

  3. Search for Yang Yang in:

Competing interests

The authors declare no competing financial interests.

Corresponding author

Correspondence to Yang Yang.

About this article

Publication history

Published

DOI

https://doi.org/10.1038/nphoton.2012.11

Further reading