Skip to main content

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

  • Letter
  • Published:

Polymer solar cells with enhanced open-circuit voltage and efficiency

Abstract

Following the development of the bulk heterojunction1 structure, recent years have seen a dramatic improvement in the efficiency of polymer solar cells. Maximizing the open-circuit voltage in a low-bandgap polymer is one of the critical factors towards enabling high-efficiency solar cells. Study of the relation between open-circuit voltage and the energy levels of the donor/acceptor2 in bulk heterojunction polymer solar cells has stimulated interest in modifying the open-circuit voltage by tuning the energy levels of polymers3. Here, we show that the open-circuit voltage of polymer solar cells constructed based on the structure of a low-bandgap polymer, PBDTTT4, can be tuned, step by step, using different functional groups, to achieve values as high as 0.76 V. This increased open-circuit voltage combined with a high short-circuit current density results in a polymer solar cell with a power conversion efficiency as high as 6.77%, as certified by the National Renewable Energy Laboratory.

This is a preview of subscription content, access via your institution

Access options

Rent or buy this article

Prices vary by article type

from$1.95

to$39.95

Prices may be subject to local taxes which are calculated during checkout

Figure 1: Comparison of three different polymers.
Figure 2: Characterization of devices based on PBDTTT–E, PBDTTT–C and PBDTTT–CF.
Figure 3: Photoconversion efficiency study.
Figure 4: Tapping-mode atomic force microscopy images of the three films used in making the devices (under optimized device conditions).

Similar content being viewed by others

References

  1. Sariciftci, N. S., Smilowitz, L., Heeger, A. J. & Wudl, F. Photoinduced electron-transfer from a conducting polymer to buckminsterfullerene. Science 258, 1474–1476 (1992).

    Article  ADS  Google Scholar 

  2. Brabec, C. J. et al. Origin of the open circuit voltage of plastic solar cells. Adv. Funct. Mater. 11, 374–380 (2001).

    Article  Google Scholar 

  3. Hou, J. H. et al. Bandgap and molecular energy level control of conjugated polymer photovoltaic materials based on benzo[1,2-b:4,5-b']dithiophene. Macromolecules 41, 6012–6018 (2008).

    Article  ADS  Google Scholar 

  4. Liang, Y. Y. et al. Development of new semiconducting polymers for high performance solar cells. J. Am. Chem. Soc. 131, 56–57 (2009).

    Article  Google Scholar 

  5. Hoth, C. N., Choulis, S. A., Schilinsky, P. & Brabec, C. J. High photovoltaic performance of inkjet printed polymer: fullerene blends. Adv. Mater. 19, 3973–3978 (2007).

    Article  Google Scholar 

  6. Aernouts, T., Aleksandrov, T., Girotto, C., Genoe, J. & Poortmans, J. Polymer based organic solar cells using ink-jet printed active layers. Appl. Phys. Lett. 92, 033306 (2008).

    Article  ADS  Google Scholar 

  7. Pudas, M., Hagberg, J. & Leppavuori, S. Gravure offset printing of polymer inks for conductors. Progr. Org. Coatings 49, 324–335 (2004).

    Article  Google Scholar 

  8. Krebs, F. C., Gevorgyan, S. A. & Alstrup, J. A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies. J. Mater. Chem. 19, 5442–5451 (2009).

    Article  Google Scholar 

  9. Krebs, F. C. Fabrication and processing of polymer solar cells: a review of printing and coating techniques. Sol. Eng. Mater. Sol. Cells 93, 394–412 (2009).

    Article  Google Scholar 

  10. Li, G. et al. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends. Nature Mater. 4, 864–868 (2005).

    Article  ADS  Google Scholar 

  11. Ma, W. L., Yang, C. Y., Gong, X., Lee, K. & Heeger, A. J. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology. Adv. Funct. Mater. 15, 1617–1622 (2005).

    Article  Google Scholar 

  12. Padinger, F., Rittberger, R. S. & Sariciftci, N. S. Effects of postproduction treatment on plastic solar cells. Adv. Funct. Mater. 13, 85–88 (2003).

    Article  Google Scholar 

  13. Li, G., Shrotriya, V., Yao, Y. & Yang, Y. Investigation of annealing effects and film thickness dependence of polymer solar cells based on poly(3-hexylthiophene). J. Appl. Phys. 98, 043704 (2005).

    Article  ADS  Google Scholar 

  14. Zhang, F. L. et al. Influence of solvent mixing on the morphology and performance of solar cells based on polyfluorene copolymer/fullerene blends. Adv. Funct. Mater. 16, 667–674 (2006).

    Article  Google Scholar 

  15. Peet, J. et al. Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols. Nature Mater. 6, 497–500 (2007).

    Article  ADS  Google Scholar 

  16. Chen, C. P., Chan, S. H., Chao, T. C., Ting, C. & Ko, B. T. Low-bandgap poly(thiophene–phenylene–thiophene) derivatives with broaden absorption spectra for use in high-performance bulk-heterojunction polymer solar cells. J. Am. Chem. Soc. 130, 12828–12833 (2008).

    Article  Google Scholar 

  17. Blouin, N., Michaud, A. & Leclerc, M. A low-bandgap poly(2,7-carbazole) derivative for use in high-performance solar cells. Adv. Mater. 19, 2295–2300 (2007).

    Article  Google Scholar 

  18. Gadisa, A. et al. A new donor–acceptor–donor polyfluorene copolymer with balanced electron and hole mobility. Adv. Funct. Mater. 17, 3836–3842 (2007).

    Article  Google Scholar 

  19. Park, S. H. et al. Bulk heterojunction solar cells with internal quantum efficiency approaching 100%. Nature Photon. 3, 297–303 (2009).

    Article  ADS  Google Scholar 

  20. Chen, M. H. et al. Efficient polymer solar cells with thin active layers based on alternating polyfluorene copolymer/fullerene bulk heterojunctions. Adv. Mater. 21, 1–5 (2009).

    Article  ADS  Google Scholar 

  21. Hou, J., Chen, H.-Y., Zhang, S., Li, G. & Yang, Y. Synthesis, characterization and photovoltaic properties of a low bandgap polymer based on silole-containing polythiophenes and benzo[c][1,2,5]thiadiazole. J. Am. Chem. Soc. 130, 16144–16145 (2008).

    Article  Google Scholar 

  22. Wang, E. et al. High-performance polymer heterojunction solar cells of a polysilafluorene derivative. Appl. Phys. Lett. 92, 033307 (2008).

    Article  ADS  Google Scholar 

  23. Krebs, F. C. et al. A complete process for production of flexible large area polymer solar cells entirely using screen printing—first public demonstration. Sol. Eng. Mater. Sol. Cells 93, 422–441 (2009).

    Article  Google Scholar 

  24. Scharber, M. C. et al. Design rules for donors in bulk-heterojunction solar cells—towards 10% energy-conversion efficiency. Adv. Mater. 18, 789–794 (2006).

    Article  Google Scholar 

  25. Shi, C. J., Yao, Y., Yang, Y. & Pei, Q. B. Regioregular copolymers of 3-alkoxythiophene and their photovoltaic application. J. Am. Chem. Soc. 128, 8980–8986 (2006).

    Article  Google Scholar 

  26. Liang, Y. Y. et al. Highly efficient solar cell polymers developed via fine-tuning of structural and electronic properties. J. Am. Chem. Soc. 131, 7792–7799 (2009).

    Article  Google Scholar 

  27. Jorgensen, M., Norrman, K. & Krebs, F. C. Stability/degradation of polymer solar cells. Sol. Eng. Mater. Sol. Cells 92, 686–714 (2008).

    Article  Google Scholar 

  28. Shrotriya, V., Wu, E. H. E., Li, G., Yao, Y. & Yang, Y. Efficient light harvesting in multiple-device stacked structure for polymer solar cells. Appl. Phys. Lett. 88, 064104 (2006).

    Article  ADS  Google Scholar 

  29. Shrotriya, V., Yao, Y., Li, G. & Yang, Y. Effect of self-organization in polymer/fullerene bulk heterojunctions on solar cell performance. Appl. Phys. Lett. 89, 063505 (2006).

    Article  ADS  Google Scholar 

  30. Li, G. et al. ‘Solvent annealing’ effect in polymer solar cells based on poly(3-hexylthiophene) and methanofullerenes. Adv. Funct. Mater. 17, 1636–1644 (2007).

    Article  Google Scholar 

  31. Li, G., Shrotriya, V., Yao, Y., Huang, J. S. & Yang, Y. Manipulating regioregular poly(3-hexylthiophene): [6,6]-phenyl-C-61-butyric acid methyl ester blends—route towards high efficiency polymer solar cells. J. Mater. Chem. 17, 3126–3140 (2007).

    Article  Google Scholar 

  32. Chu, C. W. et al. Control of the nanoscale crystallinity and phase separation in polymer solar cells. Appl. Phys. Lett. 92, 103306 (2008).

    Article  ADS  Google Scholar 

Download references

Acknowledgements

The National Renewable Energy Laboratory (NREL) is thanked for conducting the certification of devices. The authors in particular thank D.C. Olson at NREL for his help in verifying and certifying the performances of our devices.

Author information

Authors and Affiliations

Authors

Contributions

H.Y.C. conceived and performed PSC fabrication, measurements and data analysis. Y.L. and L.Y. contributed to the design of the polymer's main chain structure. J.H. designed the polymer structures and synthesis routes. S.Z. synthesized the polymers. G.Y. performed the AFM image scans. J.H. and Y.W. conceptualized and directed the research project. All authors discussed the results and commented on the manuscript.

Corresponding authors

Correspondence to Jianhui Hou or Yue Wu.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Chen, HY., Hou, J., Zhang, S. et al. Polymer solar cells with enhanced open-circuit voltage and efficiency. Nature Photon 3, 649–653 (2009). https://doi.org/10.1038/nphoton.2009.192

Download citation

  • Issue Date:

  • DOI: https://doi.org/10.1038/nphoton.2009.192

This article is cited by

Search

Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing