Skip to main content

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

Polarization-transparent microphotonic devices in the strong confinement limit

Abstract

Microphotonic structures that strongly confine light, such as photonic crystals and micron-sized resonators, have unique characteristics that could radically advance technology1,2,3,4,5,6. However, such devices cannot be used in most applications because of their inherent polarization sensitivity; they respond differently to light polarized along different axes7,8,9. To take advantage of the distinctive properties of these structures, a general, integrated, broadband solution to their polarization sensitivity is needed. Here, we show the first demonstration of such a solution. It enables arbitrary, polarization-sensitive, strong-confinement (SC) microphotonic devices to be rendered insensitive (transparent) to the input polarization at all wavelengths of operation. To test our approach, we create the first polarization-transparent add–drop filter from polarization-sensitive microring resonators. It shows almost complete elimination of polarization sensitivity over the 60-nm bandwidth measured, while maintaining outstanding filter performance. This development is a milestone for SC microphotonics, allowing the applications of photonic-crystal and microring devices to several areas, including communications, spectroscopy and remote sensing.

This is a preview of subscription content, access via your institution

Access options

Rent or buy this article

Prices vary by article type

from$1.95

to$39.95

Prices may be subject to local taxes which are calculated during checkout

Figure 1: Integrated polarization diversity scheme.
Figure 2: Design of the polarization-transparent optical add–drop filter (OADF).
Figure 3: Fabricated polarization-transparent OADF.
Figure 4: Spectral response of a fabricated polarization-transparent OADF for 40 randomly chosen polarization states at each wavelength.

Similar content being viewed by others

References

  1. Vlasov, Y. A., O'Boyle, M., Hamann, H. F. & McNab, S. J. Active control of slow light on a chip with photonic crystal waveguides. Nature 438, 65–69 (2005).

    Article  ADS  Google Scholar 

  2. Soljačić, M. & Joannopoulos, J. D. Enhancement of nonlinear effects using photonic crystals. Nature Mater. 3, 211–219 (2004).

    Article  ADS  Google Scholar 

  3. Akahane, Y., Asano, T., Song, B.-S. & Noda, S. High-Q photonic nanocavity in a two-dimensional photonic crystal. Nature 425, 944–947 (2003).

    Article  ADS  Google Scholar 

  4. Song, B.-S., Noda, S. & Asano, T. Photonic devices based on in-plane hetero photonic crystals. Science 300, 1537 (2003).

    Article  Google Scholar 

  5. Hill, M. T. et al. A fast low-power optical memory based on coupled micro-ring lasers. Nature 432, 206–209 (2004).

    Article  ADS  Google Scholar 

  6. Almeida, V. R., Barrios, C. A., Panepucci, R. R. & Lipson, M. All-optical control of light on a silicon chip. Nature 431, 1081–1084 (2004).

    Article  ADS  Google Scholar 

  7. Pavesi, L. & Lockwood, D. J. Silicon Photonics (Springer, New York, 2004).

    Google Scholar 

  8. Manolatou, C., Johnson, S. G., Fan, S., Villeneuve, P. R., Haus, H. A. & Joannopoulos, J. D. High-density integrated optics. J. Lightwave Technol. 17, 1682–1692 (1999).

    Article  ADS  Google Scholar 

  9. Sadot, D. & Boimovich, E. Tunable optical filters for WDM applications. IEEE Commun. Mag. 36, 50–55 (1998).

    Article  Google Scholar 

  10. Headley, W. R., Reed, G. T., Howe, S., Liu, A. & Paniccia, M. Polarization-independent optical racetrack resonators using rib waveguides on silicon-on-insulator. Appl. Phys. Lett. 85, 5523–5525 (2004).

    Article  ADS  Google Scholar 

  11. Xu, D.-X., Janz, S. & Cheben, P. Design of polarization-insensitive ring resonators in silicon-on-insulator using MMI couplers and cladding stress engineering. IEEE Phot. Technol. Lett. 18, 343–345 (2006).

    Article  ADS  Google Scholar 

  12. Kwan, C. H. & Chiang, K. S. Study of polarization-dependent coupling in optical waveguide directional couplers by the effective-index method with built-in perturbation correction. J. Lightwave Technol. 20, 1018–1026 (2002).

    Article  ADS  Google Scholar 

  13. Watts, M. R., Haus, H. A. & Ippen, E. P. Integrated mode-evolution-based polarization splitter. Opt. Lett. 30, 967–969 (2005).

    Article  ADS  Google Scholar 

  14. Watts, M. R. & Haus, H. A. Integrated mode-evolution-based polarization rotators. Opt. Lett. 30, 138–140 (2005).

    Article  ADS  Google Scholar 

  15. Watts, M. R. et al. Towards integrated polarization diversity: design, fabrication, and characterization of integrated polarization splitters and rotators. 2005 Optical Fiber Communications Conference Postdeadline Papers (IEEE Cat. No. 05CH37672), Part 5, Vol. 5 (2005).

  16. Popovic, M. A. et al. Multistage high-order microring-resonator add-drop filters, Opt. Lett. 31, 2571–2573 (2006).

    Article  ADS  Google Scholar 

  17. Barwicz, T. et al. Fabrication of add-drop filters based on frequency-matched microring resonators. J. Lightwave Technol. 24, 2207–2218 (2006).

    Article  ADS  Google Scholar 

  18. Melloni, A. & Martinelli, M. Synthesis of direct-coupled-resonators bandpass filters for WDM systems. J. Lightwave Technol. 20, 296–303 (2002).

    Article  ADS  Google Scholar 

  19. Popovic, M. A. et al. High-index-contrast, wide-FSR microring-resonator filter design and realization with frequency-shift compensation, presented at the Optical Fiber Communication Conference OFC/NFOEC'05, Anaheim, CA, 2005, paper OFK1.

    Google Scholar 

Download references

Acknowledgements

This project resulted from the vision of Hermann A. Haus. We thank Minghao Qi for contributing to the development of the fabrication process. This work was supported by Pirelli Labs S.p.A (Milan, Italy) through the leadership of M. Romagnoli and made use of MIT's SEBL facility in the Research Laboratory of Electronics (SEBL at RLE).

Author information

Authors and Affiliations

Authors

Contributions

T.B. and M.R.W. contributed equally to this work. T.B. developed the nanofabrication techniques required for this work and created the polarization-transparent OADF. M.R.W. proposed the integrated-polarization-diversity approach, designed the PSR and the waveguide crossings, and co-designed the microring filters.

Corresponding author

Correspondence to Tymon Barwicz.

Ethics declarations

Competing interests

The authors declare no competing financial interests.

Supplementary information

Supplementary Information

Supplementary information (PDF 91 kb)

Rights and permissions

Reprints and permissions

About this article

Cite this article

Barwicz, T., Watts, M., Popović, M. et al. Polarization-transparent microphotonic devices in the strong confinement limit. Nature Photon 1, 57–60 (2007). https://doi.org/10.1038/nphoton.2006.41

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1038/nphoton.2006.41

Search

Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing