A half-cell lithium metal battery can cycle with good efficiency at relatively high current density by engineering a nanostructured surface between the negative electrode and the electrolyte.
This is a preview of subscription content, access via your institution
Access options
Subscribe to this journal
Receive 12 print issues and online access
$259.00 per year
only $21.58 per issue
Buy this article
- Purchase on Springer Link
- Instant access to full article PDF
Prices may be subject to local taxes which are calculated during checkout
References
Bruce, P. G. et al. Nature Mater. 11, 19–29 (2012).
Zheng, G. et al. Nature Nanotech. 9, 618–623 (2014).
Aurbach, D. et al. J. Electrochem. Soc. 156, A694–A702 (2009).
Zhamu, A. et al. Energy Environ. Sci. 5, 5701–5707 (2012).
Bouchet, R. et al. Nature Mater. 12, 452–457 (2013).
Stone, G. M. et al. J. Electrochem. Soc. 159, A222–A229 (2012).
Xu, W. et al. Energy Environ. Sci. 7, 513–537 (2014).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Bouchet, R. A stable lithium metal interface. Nature Nanotech 9, 572–573 (2014). https://doi.org/10.1038/nnano.2014.165
Published:
Issue Date:
DOI: https://doi.org/10.1038/nnano.2014.165
This article is cited by
-
Self-smoothing anode for achieving high-energy lithium metal batteries under realistic conditions
Nature Nanotechnology (2019)
-
Fundamental Research on a New Process to Remove Al3+ as Potassium Alum during Lithium Extraction from Lepidolite
Metallurgical and Materials Transactions B (2016)
-
Removal of Aluminum from Leaching Solution of Lepidolite by Adding Ammonium
JOM (2016)
-
Investigation on the Oxidation and Reduction of Titanium in Molten Salt with the Soluble TiC Anode
Metallurgical and Materials Transactions E (2015)
