Hydrogen sulphide is found in raw fuels such as natural gas and coal/biomass-derived syngas. It is poisonous to catalysts and corrosive to metals and therefore needs to be removed. This is often achieved using metal oxides as reactive adsorbents, but metal oxides perform poorly when subjected to repeated cycles of sulphidation and re-oxidation1,2,3,4,5,6,7,8,9,10,11,12 as a result of complex structural and chemical changes. Here, we show that Zn–Ti–O-based adsorbents with nanofibrous morphology can sustain their initial reactivity and sulphur removal capacity over multiple regeneration cycles. These nanostructured sorbents offer rapid reaction rates that overcome the gas-transport limitations of conventional pellet-based sorbents1,13 and allow all of the material to be used efficiently. Regeneration can be carried out at the same temperature as the sulphidation step because of the higher reactivity, which prevents sorbent deterioration and reduces energy use. The efficient regeneration of the adsorbent is also aided by structural features such as the growth of hierarchical nanostructures and preferential stabilization of a wurtzite phase in the sulphidation product.
Your institute does not have access to this article
Open Access articles citing this article.
Enhancing oxidation resistance of Cu(I) by tailoring microenvironment in zeolites for efficient adsorptive desulfurization
Nature Communications Open Access 25 June 2020
Subscribe to Journal
Get full journal access for 1 year
only $8.25 per issue
All prices are NET prices.
VAT will be added later in the checkout.
Tax calculation will be finalised during checkout.
Get time limited or full article access on ReadCube.
All prices are NET prices.
Gibson, J. B. & Harrison, D. P. The reaction between hydrogen sulphide and spherical pellets of zinc oxide. Ind. Eng. Chem. Proc. Des. Dev. 19, 231–237 (1980).
Lew, S., Jothimurugesan, K. & Flytzani-Stephanopoulos, M. High-temperature hydrogen sulphide removal from fuel gases by regenerable zinc oxide-titanium dioxide sorbents. Ind. Eng. Chem. Res. 28, 535–541 (1989).
Lew, S., Sarofim, A. F. & Flytzani-Stephanopoulos, M. Sulphidation of zinc titanate and zinc oxide solids. Ind. Eng. Chem. Res. 31, 1890–1899 (1992).
Siriwardane, R. V. & Poston, J. A. Interaction of H2S with zinc titanate in the presence of H2 and CO. Appl. Surf. Sci. 45, 131–139 (1990).
Siriwardane, R. V., Poston, J. A. & Evans, G. Spectroscopic characterization of molybdenum-containing zinc titanate desulphurization sorbents. Ind. Eng. Chem. Res. 33, 2810–2818 (1994).
Poston, J. A. A reduction in the spalling of zinc titanate desulphurization sorbents through the addition of lanthanum oxide. Ind. Eng. Chem. Res. 35, 875–882 (1996).
Kobayashi, M., Shirai, H. & Nunokawa, M. Investigation on desulphurization performance and pore structure of sorbents containing zinc ferrite. Energy Fuels 11, 887–896 (1997).
Atimtay, A. T. & Harrison, D. P. Desulfurization of Hot Coal Gas. Vol. 42, NATO ASI Series G (Springer, 1998).
Jothimurugesan, K. & Gangwal, S. K. Regeneration of zinc titanate H2S sorbents. Ind. Eng. Chem. Res. 37, 1929–1933 (1998).
Sa, L. N., Focht, G. D., Ranade, P. V. & Harrison, D. P. High-temperature desulphurization using zinc ferrite: solid structural property changes. Chem. Eng. Sci. 44, 215–224 (1989).
Skrzypski, J., Bezverkhyy, J., Heintz, O. & Bellat, J. Low temperature H2S removal with metal-doped nanostructure ZnO sorbents: study of the origin of enhanced reactivity in Cu-containing materials. Ind. Eng. Chem. Res. 50, 5714–5722 (2011).
Flytzani-Stephanopoulos, M., Sakbodin, M. & Wang, Z. Regenerative adsorption and removal of H2S from hot fuel gas streams by rare earth oxides. Science 312, 1508–1510 (2006).
Efthimiadis, E. A. & Sotirchos, S. V. Reactivity evolution during sulphidation of porous zinc oxide. Chem. Eng. Sci. 48, 829–843 (1993).
Carnes, C. L. & Klabunde, K. J. Unique chemical reactivities of nanocrystalline metal oxides toward hydrogen sulphide. Chem. Mater. 14, 1806–1811 (2002).
Li, D. & Xia, Y. Fabrication of titania nanofibres by electrospinning. Nano Lett. 3, 555–560 (2003).
Ramaseshan, R., Sundarrajan, S., Jose, R. & Ramakrishna, S. Nanostructured ceramics by electrospinning. J. Appl. Phys. 102, 111101 (2007).
Dai, Y., Liu, W., Forno, E., Sun, Y. & Xia, Y. Ceramic nanofibres fabricated by electrospinning and their applications in catalysis, environmental science, and energy technology. Polym. Adv. Technol. 22, 326–338 (2011).
Liu, R., Ye, H., Xiong, X. & Liu, H. Fabrication of TiO2/ZnO composite nanofibres by electrospinning and their photocatalytic property. Mater. Chem. Phys. 121, 432–439 (2010).
Levenspiel, O. Chemical Reaction Engineering. 3rd edn (Wiley, 1999).
Zevenhoven, C. A. P., Yrjas, K. P. & Hupa, M. M. Hydrogen sulphide capture by limestone and dolomite at elevated pressure—2. Sorbent particle conversion modeling. Ind. Eng. Chem. Res. 35, 943–949 (1996).
Shen, G., Chen, D. & Lee, C. J. Hierarchical saw-like ZnO nanobelt/ZnS nanowire heterostructures induced by polar surfaces. J. Phys. Chem. B 110, 15689–15693 (2006).
Yin, Y. D. et al. Formation of hollow nanocrystals through the nanoscale Kirkendall effect. Science 304, 711–714 (2004).
Moore, D. & Wang, Z. L. Growth of anisotropic one-dimensional ZnS nanostructures. J. Mater. Chem. 16, 3898–3905 (2006).
Qadri, S. B. et al. Size-induced transition-temperature reduction in nanoparticles of ZnS. Phys. Rev. B 60, 9191–9193 (1999).
Wang, Z. et al. Morphology-tuned wurtzite-type ZnS nanobelts. Nature Mater. 4, 922–927 (2005).
Schultze, D., Steinike, U., Kussin, J. & Kretzschmar, U. Thermal oxidation of ZnS modifications sphalerite and wurtzite. Cryst. Res. Technol. 30, 553–558 (1995).
M.B. acknowledges the Dow Chemical Company for a graduate fellowship and thanks Q. Yang for assistance with sample preparation. P.K.J. acknowledges startup support from the Frederick Seitz Materials Research Laboratory where characterization was performed. M.A.S. acknowledges support from the NSF Science and Technology Center WaterCAMPWS.
The authors declare no competing financial interests.
About this article
Cite this article
Behl, M., Yeom, J., Lineberry, Q. et al. A regenerable oxide-based H2S adsorbent with nanofibrous morphology. Nature Nanotech 7, 810–815 (2012). https://doi.org/10.1038/nnano.2012.194