Skip to main content

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

  • Article
  • Published:

Design and properties of co-continuous nanostructured polymers by reactive blending

Nature Materials volume 1, pages 54–58 (2002)Cite this article

Abstract

With an annual production of hundreds of millions of tons, the few commodity polymers that dominate the plastics market cannot satisfy all the applications and expectations. In this context, the fabrication of thermodynamically stable polymer blends structured on submicrometre scales raises much hope, but poses significant scientific and industrial challenges. Here, we propose and demonstrate for an industrially relevant system, polyethylene and polyamide, that hitherto inaccessible co-continuous morphologies can be produced over a wide range of compositions by reactive blending. Paradoxically, the self-assembled structures are thermodynamically stable because of the molecular polydispersity inherent in the production method. These nanostructured materials present a unique combination of properties impossible to achieve with classical blends. This versatile, low-cost and simple strategy should be widely applicable.

This is a preview of subscription content, access via your institution

Access options

Buy this article

  • Purchase on SpringerLink
  • Instant access to full article PDF
Buy now

Prices may be subject to local taxes which are calculated during checkout

Figure 1: Reactive blending principle and strategy.
Figure 2: Co-continuous nanostructured blend.
Figure 3: Co-continuous versus phase-separated blends.
Figure 4: Mechanical properties.

Similar content being viewed by others

References

  1. Utracki, L.A. Polymer Alloys and Blends (Hanser, New York, 1989).

    Google Scholar 

  2. de Gennes, P.G. & Taupin, C. Microemulsions and the flexibility of oil/water interfaces. J. Phys. Chem. 86, 2294–2304 (1992).

    Article  Google Scholar 

  3. Bates, F.S. et al. Polymeric co-continuous microemulsions. Phys. Rev. Lett. 79, 849–852 (1997).

    Article  CAS  Google Scholar 

  4. Fredrickson, G.H. & Bates, F.S. Design of co-continuous polymeric microemulsions. J. Polym. Sci. Part B: Polym. Phys. 35, 2775–2786 (1995).

    Article  Google Scholar 

  5. Hillmyer, M.A., Maurer, W.W., Lodge, T.P., Bates, F.S. & Almdal, K. Model co-continuous microemulsions in ternary homopolymer/block copolymer blends. J. Phys. Chem. B 103, 4814–4824 (1999).

    Article  CAS  Google Scholar 

  6. Washburn, N.R., Lodge, T.P. & Bates, F.S. Ternary polymer blends as model surfactant systems. J. Phys. Chem. B 104, 6987–6997 (2000).

    Article  CAS  Google Scholar 

  7. Fredrickson, G.H. & Bates, F.S. Stabilizing co-continuous polymer blend morphologies with ABC block copolymers. Eur. Phys. J. B 1, 71–76 (1998).

    Article  CAS  Google Scholar 

  8. Orr, C.A., Adedeji, A., Hirao, A., Bates, F.S. & Macosko, C.W. Flow-induced reactive self-assembly. Macromolecules 30, 1243–1246 (1997).

    Article  CAS  Google Scholar 

  9. Lyu, S.-P. Cernohous, J.J., Bates, F.S. & Macosko, C.W. Interfacial reaction induced roughening in polymer blends. Macromolecules 32, 106–110 (1999).

    Article  CAS  Google Scholar 

  10. Charoensirisomboon, P., Inoue, T. & Weber, M. Interfacial behavior of block copolymers in situ-formed in reactive blending of dissimilar polymers. Polymer 41, 4483–4490 (2000).

    Article  CAS  Google Scholar 

  11. Ibuki, J. et al. Reactive blending of polysulfone with polyamide: a potential for solvent-free preparation. Polymer 40, 647–653 (1999).

    Article  CAS  Google Scholar 

  12. Charoensirisomboon, P., Chiba, T., Solomko, S.I., Inoue, T. & Weber, M. Reactive blending of polysulfone and polyamide: a difference in interfacial behavior between in situ formed block and graft copolymers. Polymer 40, 6803–6810 (1999).

    Article  CAS  Google Scholar 

  13. Oyama, H.T., Ougizawa, T., Inoue, T., Weber, M. & Tamaru, K. Interfacial coupling between immiscible polymers: reactive interface between polysulfone and amorphous polyamide. Macromolecules 34, 7017–7024 (2001).

    Article  CAS  Google Scholar 

  14. Yin, Z., Koulic, C., Pagnoulle, C. & Jerome, R. Reactive blending of functional PS and PMMA: interfacial behavior of in situ formed graft copolymers. Macromolecules 34, 5132–5139 (2001).

    Article  CAS  Google Scholar 

  15. de Gennes, P.G. Conformations of polymers attached to an interface. Macromolecules 13, 1069–1075 (1980).

    Article  CAS  Google Scholar 

  16. Milner, S.T., Witten, T.A. & Cates, M.E. Effects of polydispersity in the end-grafted polymer brush. Macromolecules 22, 853–861 (1989).

    Article  CAS  Google Scholar 

  17. Thompson, R.B. & Matsen, M.W. Improving polymeric microemulsions with block copolymer polydispersity. Phys. Rev. Lett. 85, 670–673 (2000).

    Article  CAS  Google Scholar 

  18. Pernot, H. Thesis, Univ. Pierre et Marie Curie (Paris 6), in preparation.

  19. Leibler, L. Emulsifying effects of block copolymers in incompatible polymer blends. Makromol. Chem.-M. Symp. 16, 1–17 (1988).

    Article  CAS  Google Scholar 

  20. Pochan, D.J. et al. Morphologies of microphase-separated A2B simple graft copolymers. Macromolecules 29, 5091–5098 (1996).

    Article  CAS  Google Scholar 

  21. Loo, Y.-L., Register, R.A., Ryan, A.J. & Dee, G.T. Polymer crystallisation confined in one, two or three dimensions. Macromolecules 34, 8968–8977 (2001).

    Article  CAS  Google Scholar 

  22. Loo, Y.-L., Register, R.A. & Ryan, A.J. Modes of crystallisation in block copolymer microdomains: breakout, templated, and confined. Macromolecules 35, 2365–2374 (2002).

    Article  CAS  Google Scholar 

  23. Xu, J.-T. et al. Morphological confinement on crystallisation in blends of poly(oxyethylene-block-oxybutylene) and poly(oxybutylene). Macromolecules 35, 3614–3621 (2002).

    Article  CAS  Google Scholar 

Download references

Acknowledgements

We are indebted to L. Monnerie and A.-V. Ruzette, and also to P. Robert and M. Hert from Atofina for helpful discussions on reactive blending and polymer alloys. We also thank L. Murino for technical advice, P. Coupard for TEM observations and C. Degoulet for SEC analysis. We are grateful to S. Granick for comments on the manuscript.

Author information

Authors and Affiliations

  1. Laboratoire Matière Molle et Chimie (UMR 167, CNRS/ESPCI/ATOFINA), ESPCI 10, rue Vauquelin, Paris, 75 005, France

    Helene Pernot & Ludwik Leibler

  2. ATOFINA, CERDATO, Serquigny, 27 470, France

    Martin Baumert & François Court

Authors
  1. Helene Pernot
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Martin Baumert
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. François Court
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Ludwik Leibler
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Ludwik Leibler.

Ethics declarations

Competing interests

The authors declare no competing financial interests.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Pernot, H., Baumert, M., Court, F. et al. Design and properties of co-continuous nanostructured polymers by reactive blending. Nature Mater 1, 54–58 (2002). https://doi.org/10.1038/nmat711

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1038/nmat711

This article is cited by

Search

Advanced search

Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing