Skip to main content

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

  • Article
  • Published:

Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells

Nature Materials volume 13, pages 897–903 (2014)Cite this article

Subjects

Abstract

Organolead trihalide perovskite materials have been successfully used as light absorbers in efficient photovoltaic cells. Two different cell structures, based on mesoscopic metal oxides and planar heterojunctions have already demonstrated very impressive advances in performance. Here, we report a bilayer architecture comprising the key features of mesoscopic and planar structures obtained by a fully solution-based process. We used CH3NH3 Pb(I1 − xBrx)3 (x = 0.1–0.15) as the absorbing layer and poly(triarylamine) as a hole-transporting material. The use of a mixed solvent of γ-butyrolactone and dimethylsulphoxide (DMSO) followed by toluene drop-casting leads to extremely uniform and dense perovskite layers via a CH3NH3I–PbI2–DMSO intermediate phase, and enables the fabrication of remarkably improved solar cells with a certified power-conversion efficiency of 16.2% and no hysteresis. These results provide important progress towards the understanding of the role of solution-processing in the realization of low-cost and highly efficient perovskite solar cells.

This is a preview of subscription content, access via your institution

Access options

Buy this article

  • Purchase on SpringerLink
  • Instant access to full article PDF
Buy now

Prices may be subject to local taxes which are calculated during checkout

Figure 1: Device architecture, scheme of solvent engineering process, and XRD of perovskite layer.
Figure 2: XRD and FTIR of the intermediate phase and scheme for the formation of perovskite material via the intermediate phase.
Figure 3: AFM and SEM images of a perovskite device.
Figure 4: Photovoltaic performance as a function of scan direction and mp-TiO2 layer thickness.
Figure 5: J–V and IPCE characteristics for the best cell, and its reproducibility.

Similar content being viewed by others

References

  1. Yella, A. Porphyrin-sensitized solar cells with cobalt (II/III)–based redox electrolyte exceed 12 percent efficiency. Science 334, 629–634 (2011).

    Article  CAS  Google Scholar 

  2. Kramer, l. J. & Sargent, E. H. The architecture of colloidal quantum dot solar cells: Materials to devices. Chem. Rev. 114, 863–882 (2014).

    Article  CAS  Google Scholar 

  3. Im, S. H. et al. All solid state multiply layered PbS colloidal quantum-dot-sensitized photovoltaic cells. Energy Environ. Sci. 4, 4181–4186 (2011).

    Article  CAS  Google Scholar 

  4. Li, G., Zhu, R. & Yang, Y. Polymer solar cells. Nature Photon. 6, 153–161 (2012).

    Article  CAS  Google Scholar 

  5. Congreve, D. N. et al. External quantum efficiency above 100% in a singlet-exciton-fission-based organic photovoltaic cell. Science 340, 334–337 (2013).

    Article  CAS  Google Scholar 

  6. Chang, J. A. et al. High-performance nanostructured inorganic–organic heterojunction solar cells. Nano Lett. 10, 2609–2612 (2010).

    Article  CAS  Google Scholar 

  7. Chang, J. A. et al. Panchromatic photon-harvesting by hole-conducting materials in inorganic–organic heterojunction sensitized-solar cell through the formation of nanostructured electron channels. Nano Lett. 12, 1863–1867 (2012).

    Article  CAS  Google Scholar 

  8. Lee, M. M. et al. Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites. Science 338, 643–647 (2012).

    Article  CAS  Google Scholar 

  9. Kim, H-S. et al. Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%. Sci. Rep. 2, 591 (2012).

    Article  Google Scholar 

  10. Heo, J. H. et al. Efficient inorganic–organic hybrid heterojunction solar cells containing perovskite compound and polymeric hole conductors. Nature Photon. 7, 486–491 (2013).

    Article  CAS  Google Scholar 

  11. Burschka, J. et al. Sequential deposition as a route to high-performance perovskite-sensitized solar cells. Nature 499, 316–319 (2013).

    Article  CAS  Google Scholar 

  12. Liu, M., Johnston, M. B. & Snaith, H. J. Efficient planar heterojunction perovskite solar cells by vapour deposition. Nature 501, 395–398 (2013).

    Article  CAS  Google Scholar 

  13. Noh, J. H., Im, S. H., Heo, J. H., Mandal, T. N. & Seok, S. I. Chemical management for colorful, efficient, and stable inorganic–organic hybrid nanostructured solar cells. Nano Lett. 13, 1764–1769 (2013).

    Article  CAS  Google Scholar 

  14. Malinkiewicz, O. et al. Perovskite solar cells employing organic charge-transport layers. Nature Photon. 6, 128–132 (2014).

    Article  Google Scholar 

  15. Waleed, W. A. & Etgar, L. Depleted hole conductor-free lead halide iodide heterojunction solar cells. Energy Environ. Sci. 6, 3249–3253 (2013).

    Article  Google Scholar 

  16. You, J. et al. Low-temperature solution-processed perovskite solar cells with high efficiency and flexibility. ACS Nano 8, 1674–1680 (2014).

    Article  CAS  Google Scholar 

  17. Stranks, S. D. et al. Electron–hole diffusion lengths exceeding 1 micrometer in an organometal trihalide perovskite absorber. Science 342, 341–344 (2013).

    Article  CAS  Google Scholar 

  18. Xing, G. et al. Long-range balanced electron- and hole-transport lengths in organic–inorganic CH3NH3PbI3 . Science 342, 344–347 (2013).

    Article  CAS  Google Scholar 

  19. Jeng, J-U. et al. CH3NH3PbI3 perovskite/fullerene planar-heterojunction hybrid solar cells. Adv. Mater. 25, 3727–3732 (2013).

    Article  CAS  Google Scholar 

  20. Eperon, G. E., Burlakov, V. M., Docampo, P., Goriely, A. & Snaith, H. J. Morphological control for high performance, solution-processed planar heterojunction perovskite solar cells. Adv. Funct. Mater. 24, 151–157 (2014).

    Article  CAS  Google Scholar 

  21. Beckmann, P. A. A review of polytypism in lead iodide. Cryst. Res. Technol. 45, 455–460 (2010).

    Article  CAS  Google Scholar 

  22. Miyamae, H. et al. The crystal structure of lead(II) iodide-dimethylsulphoxide(1/2), PbI2(DMSO)2 . Chem. Lett. 6, 663–664 (1980).

    Article  Google Scholar 

  23. Herman, M. et al. Optimal I–V curve scan time of solar cells and modules in light of irradiance level. Int. J. Photoenergy 2012, 151452 (2012)

    Article  Google Scholar 

  24. Koide, N. & Han, I. Measuring methods of cell performance of dye-sensitized solar cells. Rev. Sci. Instrum. 75, 2828–2831 (2004).

    Article  CAS  Google Scholar 

Download references

Acknowledgements

This work was supported by the Global Research Laboratory (GRL) Program, the Global Frontier R&D Program of the Center for Multiscale Energy System funded by the National Research Foundation in Korea, and by a grant from the KRICT 2020 Program for Future Technology of the Korea Research Institute of Chemical Technology (KRICT), Republic of Korea.

Author information

Author notes

  1. Nam Joong Jeon and Jun Hong Noh: These authors contributed equally to this work.

Authors and Affiliations

  1. Division of Advanced Materials, Korea Research Institute of Chemical Technology, 141 Gajeong-Ro, Yuseong-Gu, Daejeon 305-600, Korea

    Nam Joong Jeon, Jun Hong Noh, Young Chan Kim, Woon Seok Yang, Seungchan Ryu & Sang Il Seok

  2. Department of Energy Science, 2066 Seoburo, Jangan-gu, Sungkyunkwan University, Suwon 440-746, Republic of Korea

    Sang Il Seok

Authors
  1. Nam Joong Jeon
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Jun Hong Noh
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Young Chan Kim
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Woon Seok Yang
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Seungchan Ryu
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Sang Il Seok
    View author publications

    You can also search for this author in PubMed Google Scholar

Contributions

N.J.J., J.H.N. and S.I.S. conceived the experiments, data analysis and interpretation. N.J.J., Y.C.K., W.S.Y., S.R. and J.H.N. performed the fabrication of devices, device performance measurements and characterization. N.J.J., S.R., Y.C.K. and W.S.Y. carried out the synthesis of materials for perovskites and S.I.S prepared TiO2 particles and pastes. The manuscript was written by S.I.S., J.H.N. and N.J.J. The project was planned, directed and supervised by S.I.S. All authors discussed the results and commented on the manuscript.

Corresponding author

Correspondence to Sang Il Seok.

Ethics declarations

Competing interests

The authors declare no competing financial interests.

Supplementary information

Supplementary Information

Supplementary file (PDF 912 kb)

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Jeon, N., Noh, J., Kim, Y. et al. Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells. Nature Mater 13, 897–903 (2014). https://doi.org/10.1038/nmat4014

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1038/nmat4014

Search

Advanced search

Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing