High strength and high toughness are usually mutually exclusive in engineering materials. In ceramics, improving toughness usually relies on the introduction of a metallic or polymeric ductile phase, but this decreases the material’s strength and stiffness as well as its high-temperature stability. Although natural materials that are both strong and tough rely on a combination of mechanisms operating at different length scales, the relevant structures have been extremely difficult to replicate. Here, we report a bioinspired approach based on widespread ceramic processing techniques for the fabrication of bulk ceramics without a ductile phase and with a unique combination of high strength (470 MPa), high toughness (17.3 MPa m1/2), and high stiffness (290 GPa). Because only mineral constituents are needed, these ceramics retain their mechanical properties at high temperatures (600 °C). Our bioinspired, material-independent approach should find uses in the design and processing of materials for structural, transportation and energy-related applications.
Subscribe to Journal
Get full journal access for 1 year
only $8.25 per issue
All prices are NET prices.
VAT will be added later in the checkout.
Tax calculation will be finalised during checkout.
Rent or Buy article
Get time limited or full article access on ReadCube.
All prices are NET prices.
Ashby, M. F. Materials Selection in Mechanical Design 624 (ASTM International, (2010).
Ritchie, R. O. The conflicts between strength and toughness. Nature Mater. 10, 817–822 (2011).
Koester, K. J., Ager, J. W. & Ritchie, R. O. The true toughness of human cortical bone measured with realistically short cracks. Nature Mater. 7, 672–677 (2008).
Peterlik, H., Roschger, P., Klaushofer, K. & Fratzl, P. From brittle to ductile fracture of bone. Nature Mater. 5, 52–55 (2006).
Barthelat, F. & Rabiei, R. Toughness amplification in natural composites. J. Mech. Phys. Solids 59, 829–840 (2011).
Barthelat, F. et al. On the mechanics of mother-of-pearl: A key feature in the material hierarchical structure. J. Mech. Phys. Solids 55, 306–337 (2007).
Okumura, K. & De Gennes, P. G. Why is nacre strong? Elastic theory and fracture mechanics for biocomposites with stratified structures. Eur. Phys. J. E 4, 121–127 (2001).
Song, F., Soh, A. K. & Bai, Y. L. Structural and mechanical properties of the organic matrix layers of nacre. Biomaterials 24, 3623–3631 (2003).
Meyers, M. A., McKittrick, J. & Chen, P-Y. Structural biological materials: Critical mechanics-materials connections. Science 339, 773–779 (2013).
Bonderer, L. J., Studart, A. R. & Gauckler, L. J. Bioinspired design and assembly of platelet reinforced polymer films. Science 319, 1069–1073 (2008).
Clegg, W. J., Kendall, K., Alford, N. M., Button, T. W. & Birchall, J. D. A simple way to make tough ceramics. Nature 347, 455–457 (1990).
Munch, E. et al. Tough, bio-inspired hybrid materials. Science 322, 1516–1520 (2008).
Erb, R. M., Libanori, R., Rothfuchs, N. & Studart, A. R. Composites reinforced in three dimensions by using low magnetic fields. Science 335, 199–204 (2012).
Deville, S. et al. Metastable and unstable cellular solidification of colloidal suspensions. Nature Mater. 8, 966–972 (2009).
Hunger, P. M., Donius, A. E. & Wegst, U. G. K. Platelets self-assemble into porous nacre during freeze casting. J. Mech. Behav. Biomed. Mater. 19, 87–93 (2013).
Herring, C. Effect of change of scale on sintering phenomena. J. Appl. Phys. 21, 301–303 (1950).
Zaitsev, A., Litvina, A. D., Mogutnov, B. M. & Tsaplin, A. A. Thermodynamic properties and phase equilibria in the system CaO-SiO2-Al2O3 . High Temp. Mater. Sci. 34, 223–231 (1995).
Faber, K. T. & Evans, A. G. Crack deflection processes-I Theory. Acta Metall. 31, 564–576 (1983).
Kolednik, O., Predan, J., Fischer, F. D. & Fratzl, P. Bioinspired design criteria for damage-resistant materials with periodically varying microstructure. Adv. Funct. Mater. 21, 3634–3641 (2011).
Koester, K. J., Ager, J. W. & Ritchie, R. O. The effect of aging on crack-growth resistance and toughening mechanisms in human dentin. Biomaterials 29, 1318–1328 (2008).
Cook, J., Gordon, J. E., Evans, C. C. & Marsh, D. M. A mechanism for the control of crack propagation in all-brittle systems. Proc. R. Soc. A 282, 508–520 (1964).
Dimas, L. S. & Buehler, M. J. Tough and stiff composites with simple building blocks. J. Mater. Res. 28, 1295–1303 (2013).
Launey, M. E. et al. A novel biomimetic approach to the design of high-performance ceramic-metal composites. J. R. Soc. Inter. 7, 741–753 (2010).
Munro, R. G. Evaluated material properties for a sintered alpha-alumina. J. Am. Ceram. Soc. 28, 1919–1928 (1997).
Pavlacka, R., Bermejo, R., Chang, Y., Green, D. J. & Messing, G. L. Fracture behavior of layered alumina microstructural composites with highly textured layers. J. Am. Ceram. Soc. 9, 1577–1585 (2013).
Zhan, G-D., Kuntz, J. D., Wan, J. & Mukherjee, A. K. Single-wall carbon nanotubes as attractive toughening agents in alumina-based nanocomposites. Nature Mater. 2, 38–42 (2003).
Tuan, W. H., Wu, H. H. & Yang, T. J. The preparation of Al2O3/Ni composites by a powder coating technique. J. Mater. Sci. 30, 855–859 (1995).
Travitzky, N., Gutmanas, E. & Claussen, N. Mechanical properties of composites fabricated by pressureless infiltration technique. Mater. Lett. 33, 47–50 (1997).
Prielipp, H. et al. Strength and fracture toughness of aluminum/alumina composites with interpenetrating networks. Mater. Sci. Eng. A 197, 19–30 (1995).
Aghajanian, M. K., MacMillan, N. H., Kennedy, C. R., Luszcz, S. J. & Roy, R. Properties and microstructures of Lanxide Al2O3-Al ceramic composite materials. J. Mater. Sci. 24, 658–670 (1989).
Chen, R., Chiu, Y. & Tuan, W. Toughening alumina with both nickel and zirconia inclusions. J. Eur. Ceram. Soc. 20, 1901–1906 (2000).
Wei, T. et al. The effect of carbon nanotubes microstructures on reinforcing properties of SWNTs/alumina composite. Mater. Res. Bull. 43, 2806–2809 (2008).
Peigney, A., Laurent, C., Flahaut, E. & Rousset, a. Carbon nanotubes in novel ceramic matrix nanocomposites. Ceram. Int. 26, 677–683 (2000).
Yamamoto, G., Omori, M., Hashida, T. & Kimura, H. A novel structure for carbon nanotube reinforced alumina composites with improved mechanical properties. Nanotechnology 19, 315708 (2008).
Liu, J., Yan, H. & Jiang, K. Mechanical properties of graphene platelet-reinforced alumina ceramic composites. Ceram. Int. 39, 6215–6221 (2013).
ASTM E1820-06, Annual Book of ASTM Standards, Vol 0301: Metals—Mechanical Testing; Elevated and Low-Temperature Tests; Metallography (ASTM International, (2006).
Launey, M. E. et al. Designing highly toughened hybrid composites through nature-inspired hierarchical complexity. Acta Mater. 57, 2919–2932 (2009).
Nalla, R. K., Stölken, J. S., Kinney, J. H. & Ritchie, R. O. Fracture in human cortical bone: Local fracture criteria and toughening mechanisms. J. Biomech. 38, 1517–1525 (2005).
National Institute of Standards and Technology. NIST Structural Ceramics Database (SCD) (2002); www.ceramics.nist.gov/srd/scd
Libanori, R., Erb, R. M. & Studart, A. R. Mechanics of platelet-reinforced composites assembled using mechanical and magnetic stimuli. ACS Appl. Mater. Interf. 5, 10794–10805 (2013).
Becher, P. F. Microstructural design of toughened ceramics. J. Am. Ceram. Soc. 74, 255–269 (1991).
Rahaman, M. N., Yao, A., Bal, B. S., Garino, J. P. & Ries, M. D. Ceramics for prosthetic hip and knee joint replacement. J. Am. Ceram. Soc. 90, 1965–1988 (2007).
Wegst, U. G. K. & Ashby, M. F. The mechanical efficiency of natural materials. Phil. Mag. 84, 2167–2186 (2004).
We acknowledge the financial support of the ANRT (Association Nationale Recherche Technologie) and Saint-Gobain through a CIFRE fellowship, convention #808/2010. We are indebted to the Centre Lyonnais de Microscopie (CLYM) for access to the FIB microscope. Acknowledgements are due to Guillaume Bonnefont from MATEIS for his assistance on the sintering equipment, and C. Barentin from the ILM for tipping us on the Carbopol to obtain a yield stress suspension.
The authors declare no competing financial interests.
About this article
Cite this article
Bouville, F., Maire, E., Meille, S. et al. Strong, tough and stiff bioinspired ceramics from brittle constituents. Nature Mater 13, 508–514 (2014). https://doi.org/10.1038/nmat3915
Nature Communications (2021)
Scientific Reports (2021)
Freeze casting of lamellar-structured porous lead-free (Na0.52K0.48)(Nb0.95Sb0.05)O3 piezoceramic with remarkable enhancement in piezoelectric voltage constant and hydrostatic figure of merit
Journal of Materials Science: Materials in Electronics (2021)
Progress in Bio-inspired Anti-solid Particle Erosion Materials: Learning from Nature but Going beyond Nature
Chinese Journal of Mechanical Engineering (2020)