Creating lightweight, mechanically robust materials has long been an engineering pursuit. Many siliceous skeleton species—such as diatoms, sea sponges and radiolarians—have remarkably high strengths when compared with man-made materials of the same composition, yet are able to remain lightweight and porous1,2,3,4,5,6,7. It has been suggested that these properties arise from the hierarchical arrangement of different structural elements at their relevant length scales8,9. Here, we report the fabrication of hollow ceramic scaffolds that mimic the length scales and hierarchy of biological materials. The constituent solids attain tensile strengths of 1.75 GPa without failure even after multiple deformation cycles, as revealed by in situ nanomechanical experiments and finite-element analysis. We discuss the high strength and lack of failure in terms of stress concentrators at surface imperfections and of local stresses within the microstructural landscape. Our findings suggest that the hierarchical design principles offered by hard biological organisms can be applied to create damage-tolerant lightweight engineering materials.
This is a preview of subscription content
Subscribe to Journal
Get full journal access for 1 year
only $8.25 per issue
All prices are NET prices.
VAT will be added later in the checkout.
Tax calculation will be finalised during checkout.
Get time limited or full article access on ReadCube.
All prices are NET prices.
Kröger, N. Prescribing diatom morphology: Toward genetic engineering of biological nanomaterials. Curr. Opin. Chem. Biol. 11, 662–669 (2007).
Aizenberg, J. et al. Skeleton of Euplectella sp.: Structural hierarchy from the nanoscale to the macroscale. Science 309, 275–278 (2005).
Weaver, J. C. et al. Hierarchical assembly of the siliceous skeletal lattice of the hexactinellid sponge Euplectella aspergillum. J. Struct. Biol. 158, 93–106 (2007).
Hamm, C. E. et al. Architecture and material properties of diatom shells provide effective mechanical protection. Nature 421, 841–843 (2003).
Yang, W. et al. Natural flexible dermal armor. Adv. Mater. 25, 31–48 (2013).
Weiner, S. & Wagner, H. D. The material bone: Structure-mechanical function relations. Annu. Rev. Mater. Sci. 28, 271–298 (1998).
Kamat, S., Su, X., Ballarini, R. & Heuer, A. Structural basis for the fracture toughness of the shell of the conch Strombus gigas. Nature 405, 1036–1040 (2000).
Jäger, I. & Fratzl, P. Mineralized collagen fibrils: A mechanical model with a staggered arrangement of mineral particles. Biophys. J. 79, 1737–1746 (2000).
Gao, H., Ji, B., Jager, I. L., Arzt, E. & Fratzl, P. Materials become insensitive to flaws at nanoscale: Lessons from nature. Proc. Natl Acad. Sci. USA 100, 5597–5600 (2003).
Robinson, W. J. & Goll, R. M. Fine skeletal structure of the radiolarian Callimitra carolotae Haeckel. Micropaleontology 24, 432–439 (1978).
Sarikaya, M. & Aksay, I. A. Nacre of abalone shell: A natural multifunctional nanolaminated ceramic-polymer composite material. Results Probl. Cell Diff. 19, 1–26 (1992).
Gibson, L. J. & Ashby, M. F. Cellular Solids: Structure And Properties 2nd edn Vol. 2 (Cambridge Univ. Press, 1999).
Greer, J. R. & De Hosson, J. T. Plasticity in small-sized metallic systems: Intrinsic versus extrinsic size effect. Prog. Mater. Sci. 56, 654–724 (2011).
Jang, D. & Greer, J. R. Transition from a strong-yet-brittle to a stronger-and-ductile state by size reduction of metallic glasses. Nature Mater. 9, 215–219 (2010).
Korte, S., Barnard, J., Stearn, R. & Clegg, W. Deformation of silicon Insights from microcompression testing at 25500C. Int. J. Plast. 27, 1853–1866 (2011).
Östlund, F. et al. Brittle-to-ductile transition in uniaxial compression of silicon pillars at room temperature. Adv. Funct. Mater. 19, 2439–2444 (2009).
Matoy, K. et al. A comparative micro-cantilever study of the mechanical behavior of silicon based passivation films. Thin Solid Films 518, 247–256 (2009).
Jang, D. & Greer, J. R. Size-induced weakening and grain boundary-assisted deformation in 60 nm grained Ni nanopillars. Scr. Mater. 64, 77–80 (2011).
Gu, X. W. et al. Size dependent deformation of nanocrystalline Pt nanopillars. Nano Lett. 12, 6385–6392 (2012).
Meyers, M. A. & Chawla, K. K. Mechanical Behavior of Materials 1st edn (Prentice-Hall, 1998).
Kingery, W. D., Bowen, H. K. & Uhlmann, D. R. Introduction to Ceramics 2nd edn (Wiley, 1975).
Schaedler, T. A. et al. Ultralight metallic microlattices. Science 334, 962–965 (2011).
Bückmann, T. et al. Tailored 3D mechanical metamaterials made by dip-in direct-laser-writing optical lithography. Adv. Mater. 24, 2710–2714 (2012).
Kadic, M., Bückmann, T., Stenger, N., Thiel, M. & Wegener, M. On the practicability of pentamode mechanical metamaterials. Appl. Phys. Lett. 100, 191901 (2012).
Law, K. & Gardner, L. Lateral instability of elliptical hollow section beams. Eng. Struct. 37, 152–166 (2012).
Li, C., Ru, C. Q. & Mioduchowski, A. Torsion of the central pair microtubules in eukaryotic flagella due to bending-driven lateral buckling. Biochem. Biophys. Res. Commun. 351, 159–164 (2006).
Shackelford, J. F. & Alexander, W. Materials Science and Engineering Handbook 3rd edn (CRC Press, 2000).
Andrievski, R. Physical-mechanical properties of nanostructured titanium nitride. Nanostruct. Mater. 9, 607–610 (1997).
Lim, J-W., Park, H-S., Park, T-H., Lee, J-J. & Joo, J. Mechanical properties of titanium nitride coatings deposited by inductively coupled plasma assisted direct current magnetron sputtering. J. Vac. Sci. Technol. A 18, 524–528 (2000).
George, S. M. Atomic layer deposition: An overview. Chem. Rev. 110, 111–131 (2010).
Gu, X. W., Wu, Z., Zhang, Y-W., Srolovitz, D. J. & Greer, J. R. Flaw-driven failure in nanostructures (2013); preprint at http://arxiv.org/1307.3182.
Wiederhorn, S. M. Brittle fracture and toughening mechanisms in ceramics. Annu. Rev. Mater. Sci. 14, 373–403 (1984).
Kumar, S., Wolfe, D. & Haque, M. Dislocation shielding and flaw tolerance in titanium nitride. Int. J. Plast. 27, 739–747 (2011).
The authors gratefully acknowledge the financial support from the Dow-Resnick Innovation Fund at Caltech, DARPA’s Materials with Controlled Microstructure and Architecture program, and the Army Research Office through the Institute for Collaborative Biotechnologies (ICB) at Caltech (ARO Award number UCSB.ICB4b). Part of this work was carried out at the Jet Propulsion Laboratory under a contract with NASA. The authors acknowledge critical support and infrastructure provided by the Kavli Nanoscience Institute at Caltech.
The authors declare no competing financial interests.
Supplementary Information (PDF 258 kb)
Supplementary Movie S1 (AVI 12651 kb)
Supplementary Movie S2 (AVI 44394 kb)
Supplementary Movie S3 (AVI 54288 kb)
Supplementary Movie S4 (AVI 55589 kb)
About this article
Cite this article
Jang, D., Meza, L., Greer, F. et al. Fabrication and deformation of three-dimensional hollow ceramic nanostructures. Nature Mater 12, 893–898 (2013). https://doi.org/10.1038/nmat3738
Similarities of the Mechanical Responses of Body-Centered Cubic Lattice Structures with Different Constituent Materials Under Compression
Nature Materials (2021)
Scientific Reports (2021)
NPG Asia Materials (2021)
Journal of Advanced Ceramics (2021)