Article | Published:

Heterogeneity in polymer melts from melting of polymer crystals

Nature Materialsvolume 4pages635641 (2005) | Download Citation


  • An Erratum to this article was published on 01 June 2006


Semi-crystalline polymers containing amorphous and crystalline regions usually have intimately mixed chains. The resulting topological constraints (entanglements) in the amorphous regions limit the drawability in the solid state. By controlled synthesis the number of entanglements can be reduced. Ultimately, crystals composed of single chains are feasible, where the chains are fully separated from each other. If such separation can be maintained in the melt a new melt state can be formed. Here we show that through slow and carefully controlled melting such polymer crystals form a heterogeneous melt with more entangled regions, where the chains are mixed, and less entangled ones, composed of individually separated chains. Chain reptation, required for the homogenization of the entanglement distribution, is found to be considerably hindered. The long-lived heterogeneous melt shows decreased melt viscosity and provides enhanced drawability on crystallization. This novel route to create heterogeneous melt should be applicable to polymers in general.

Access optionsAccess options

Rent or Buy article

Get time limited or full article access on ReadCube.


All prices are NET prices.


  1. 1

    Doi, M. & Edwards, S. F. The Theory of Polymer Dynamics (Clarendon, Oxford, 1986).

  2. 2

    De Gennes, P. G. Scaling Concepts in Polymer Physics (Cornell Univ. Press, Ithaca, 1979).

  3. 3

    Rastogi, S., Goossens, J. G. P., Spoelstra, A. B. & Lemstra, P. J. Chain mobility in polymer systems: on the borderline between solid and melt. 1. Lamellar doubling during annealing of polyethylene. Macromolecules 30, 7880–7889 (1997).

  4. 4

    Rastogi, S. et al. A novel route to fatigue resistant fully sintered UHMW-PE for knee-prosthesis. Biomacromolecules 6, 942–947 (2005).

  5. 5

    Corbeij-Kurelec, L. Chain Mobility in Polymer Systems; On the Borderline between Solid and Melt Thesis, Ch. 7 Eindhoven Univ. of Technology (2001).

  6. 6

    Rastogi, S. & Kurelec, L. Polymorphism in polymers; its implications for polymer crystallisation. J. Mater. Sci. 35, 5121–5138 (2000).

  7. 7

    De Gennes, P. G. Explosion à la fusion. C. R. Acad. Sci. Paris II 321, 363–365 (1995).

  8. 8

    Barham, P. & Sadler, D. M. A neutron scattering study of the melting behaviour of polyethylene single crystals. Polymer 32, 393–395 (1991).

  9. 9

    Tracht, U. et al. Length scale of dynamic heterogeneities at the glass transition determined by multidimensional nuclear magnetic resonance. Phys. Rev. Lett. 81, 2727–2730 (1998).

  10. 10

    Graf, R., Heuer, A. & Spiess, H. W. Chain-order effects in polymer melts probed by 1H double-quantum NMR spectroscopy. Phys. Rev. Lett. 80, 5738–5741 (1998).

  11. 11

    Schmidt-Rohr, K. & Spiess, H. W. Multidimensional Solid-State NMR and Polymers (Academic, New York, 1994).

  12. 12

    Likhtman, A. E. & McLeish, T. C. B. Quantitative theory for linear dynamics of linear entangled polymers. Macromolecules 35, 6332–6343 (2002).

  13. 13

    Graham, R. S., Likhtman, A. E., McLeish, T. C. B. & Milner, S. T. Microscopic theory of linear, entangled polymer chains under rapid deformation including chain stretch and convective constraint release. J. Rheol. 47, 1171–1200 (2003).

  14. 14

    Mc Leish, T. C. B. & Milner, S. T. Entangled dynamics and melt flow of branched polymers. Adv. Polym. Sci. 143, 195–231 (1999).

  15. 15

    Wischnewski, A., Monkenbuch, M., Willner, L., Richter, D. & Kali, G. Direct observation of the transition from free to constrained single-segment motion in entangled polymer melts. Phys. Rev. Lett. 90, 583021–583024 (2003).

  16. 16

    Bates, F. S., Wignall, G. D. & Koehler, W. C. Critical behaviour of binary liquid mixtures of deuterated and protonated polymers. Phys. Rev. Lett. 55, 2425–2428 (1985).

  17. 17

    Ferry, J. D. Viscoelastic Properties of Polymers 3rd edn (Wiley, New York, 1980).

  18. 18

    Raju, V. R., Manezes, E. V., Marin, G., Graessley, W. W. & Fetters, L. J. Concentration and molecular weight dependence of viscoelastic properties in linear and star polymers. Macromolecules 14, 1668–1676 (1981).

  19. 19

    Carella, J. M., Graessley, W. W. & Fetters, L. J. Effects of chain microstructure on the viscoelastic properties of linear polymer melts: polybutadienes and hydrogenated polybutadienes. Macromolecules 17, 2775–2786 (1984).

  20. 20

    Wood-Adams, P. M., Dealy, J. M., de Groot, A. W. & Redwine, O. D. Effect of molecular structure on the linear viscoelastic behaviour of polyethylene. Macromolecules 33, 7489–7499 (2000).

  21. 21

    Lohse, D. J. et al. Well-defined, model long chain branched polyethylene. 2. Melt rheological behaviour. Macromolecules 35, 3066–3075 (2002).

  22. 22

    Vega, J. F., Rastogi, S., Peters, G. W. M. & Meijer, H. E. H. Rheology and reptation of linear polymers: Ultra high molecular weight chain dynamics in the melt. J. Rheol. 48, 663–678 (2004).

  23. 23

    Rotzinger, B. P., Chanzy, H. D. & Smith, P. High strength/high modulus polyethylene: synthesis and processing of ultra-high molecular weight virgin powders. Polymer 30, 1814–1819 (1989).

  24. 24

    Smith, P. & Lemstra, P. J. Ultra-high-strength polyethylene filaments by solution spinning/drawing. J. Mater. Sci. 15, 505–514 (1980).

  25. 25

    Lemstra, P. J., Bastiaansen, C. W. M. & Rastogi, S. in Structure Formation in Polymeric Fibers (ed. Salem, D. R.) Ch. 5 (Hanser, Munich, 2000).

  26. 26

    Bastiaansen, C. W. M., Meijer, H. E. H. & Lemstra, P. J. Memory effects in polyethylenes: influence of processing and crystallization history. Polymer 31, 1435–1440 (1990).

Download references


The authors wish to thank H. E. H. Meijer, C. Bailly, J. F. Vega, R. Duchateau and P. Magusin for constructive discussions.

Author information


  1. Department of Chemical Engineering, Eindhoven University of Technology, 5600 MB, Eindhoven, PO Box 513, The Netherlands

    • Sanjay Rastogi
    •  & Dirk R. Lippits
  2. Max Planck Institute for Polymer Research, Ackermannweg 10, D-55128, Mainz, Germany

    • Sanjay Rastogi
    • , Robert Graf
    • , Yefeng Yao
    •  & Hans W. Spiess
  3. Dutch Polymer Institute, PO Box 902, 5600AX, Eindhoven, The Netherlands

    • Sanjay Rastogi
    •  & Gerrit W. M. Peters
  4. Department of Mechanical Engineering, Eindhoven University of Technology, 5600 MB, Eindhoven, PO Box 513, The Netherlands

    • Gerrit W. M. Peters


  1. Search for Sanjay Rastogi in:

  2. Search for Dirk R. Lippits in:

  3. Search for Gerrit W. M. Peters in:

  4. Search for Robert Graf in:

  5. Search for Yefeng Yao in:

  6. Search for Hans W. Spiess in:

Competing interests

The authors declare no competing financial interests.

Corresponding author

Correspondence to Sanjay Rastogi.

Supplementary information

  1. Supplementary Information

    Supplementary annexures I - IV and supplementary figures (PDF 309 kb)

About this article

Publication history




Issue Date


Further reading