Assembly-driven activation of the AIM2 foreign-dsDNA sensor provides a polymerization template for downstream ASC

AIM2 recognizes foreign dsDNA and assembles into the inflammasome, a filamentous supramolecular signalling platform required to launch innate immune responses. We show here that the pyrin domain of AIM2 (AIM2PYD) drives both filament formation and dsDNA binding. In addition, the dsDNA-binding domain of AIM2 also oligomerizes and assists in filament formation. The ability to oligomerize is critical for binding dsDNA, and in turn permits the size of dsDNA to regulate the assembly of the AIM2 polymers. The AIM2PYD oligomers define the filamentous structure, and the helical symmetry of the AIM2PYD filament is consistent with the filament assembled by the PYD of the downstream adaptor ASC. Our results suggest that the role of AIM2PYD is not autoinhibitory, but generating a structural template by coupling ligand binding and oligomerization is a key signal transduction mechanism in the AIM2 inflammasome.

I n the innate immune system of mammals, supramolecular signalling platforms are directly assembled on intracellular foreign double-stranded (ds) DNA and RNA arising from invading pathogens (see refs 1-6 for review). Unlike conventional enzymatic turnovers, these supra-structures then induce the sequential polymerization of downstream effectors to propagate upstream signals [7][8][9][10] . Though essential for defence against a number of pathogens such as Francisella tularensis and herpes simplex viruses [11][12][13] , dysregulated foreign-nucleic acid-sensing pathways are associated with several autoimmune disorders including systemic lupus erythematosus and Sjögren's syndrome [14][15][16] . How the assembly of these large, complex structures is initiated on appropriate nucleic acids, and how the upstream ligandreceptor assemblies promote the sequential oligomerization of specific downstream effectors are two major unresolved mechanistic questions in understanding the foreignnucleic acid-sensing pathways 5,6 . In this report, we set out to answer these fundamental questions in the assembly of the foreign-dsDNA-sensing filamentous superstructures by absentin-melanoma-2 (AIM2).
Many proteins build nucleoprotein filaments, frequently by classic RecA-like mechanisms 9,10,26,27 . Indeed, retinoic acidinducible gene-I (Rig-I) and myeloid-differentiation-antigen-5 (MDA5) directly bind foreign dsRNA and assemble into filamentous signalling platforms using their RecA-like helicase domains 9,10,28-30 . However, ALRs are not RecA-like proteins, but consist of one oligomerization domain named pyrin domain (PYD) and one or two nonspecific dsDNA-binding HIN200 (hematopoietic interferon-inducible nuclear protein with 200 amino acids) domains (Fig. 1a) 31 . Indeed, in contrast to Rig-I or MDA5 (refs 9,10,28-30), our recent study of IFI16 suggests that nucleic acid binding and polymerization are allosterically coupled in ALRs 23 . For instance, the two HIN200 domains of IFI16 in isolation not only lack any significant oligomerization activity but also fail to form stable dsDNA-bound complexes under physiologically relevant reaction conditions 23 . However, such a transient interaction between the HIN200 domains and dsDNA larger than 60 base pairs (bp) permits at least four IFI16 molecules to cluster, allowing the non-dsDNA-binding PYD of IFI16 (IFI16 PYD ) to initiate the assembly of the filament in a switch-like manner 23 .
There are two major unresolved questions regarding AIM2 inflammasome assembly. First, how AIM2 initiates the assembly is controversial. In contrast to the essential positive function of IFI16 PYD in dsDNA binding and oligomerization 22,23 , it was reported that the PYD of AIM2 (AIM2 PYD ) plays an autoinhibitory function by blocking the dsDNA-binding surface of HIN200 domain (AIM2 Hin ) (refs 32,33). Although it was recently reported that isolated AIM2 PYD auto-assembles into filaments 7,34 , whether the filamentation activity has any role in dsDNA binding remains unknown. Second, although it has been established that AIM2 PYD directly induces the polymerization of ASC PYD (ref. 7), how the recognition occurs at the structural level remains speculative. For instance, many inflammatory signalling proteins contain PYDs and several highly conserved side chains that mediate multimeric PYD-PYD interactions have been identified 7,34,35 ; however, only a subset of PYDs is known to interact with ASC 36,37 . A recent study on foreign-dsRNA-sensing pathways provides a potential mechanism, as Hur and colleagues discovered that congruent multimeric architectures underpin the sequential oligomerization in the Rig-I signalling pathway 9 . For instance, Rig-I recruits the CARDs of mitochondrial antiviralsignalling protein (MAVS CARD ) into the helical 'oligomerization trajectory' of its CARD tetramers (Rig-I CARD ), consequently providing a structural template for the polymerization of the MAVS CARD filament 9 . Wu and colleagues have determined the architecture of the filament assembled by the PYD of ASC (ASC PYD ) (ref. 7). However, because the architecture of AIM2 PYD filament is unknown, it remains to be seen whether the AIM2-ASC axis operates in a similar manner.
Here we find that AIM2 is not autoinhibited, but the size of dsDNA can act as a 'molecular ruler' to regulate the oligomerization of AIM2. We also find that the helical symmetry of the AIM2 PYD filament is consistent with that of ASC PYD , suggesting that AIM2 PYD filaments provide a template for assembling AIM2 filaments.

N-terminal MBP masks the oligomerization activity of AIM2.
No biochemical studies reported to date employ full-length AIM2 (AIM2 FL ) without additional protein tags. Indeed, the cornerstone of the autoinhibitory model proposed by Xiao and colleagues is an observation where N-terminal maltose-binding protein (MBP)-tagged full-length AIM2 (AIM2 FL ) binds dsDNA more weakly than isolated AIM2 Hin (ref. 32). However, it was shown that N-terminal MBP masks the intrinsic oligomerization activity of PYDs by blocking a key interaction interface 7,33,34 . Thus, to re-examine the initiation of the AIM2 inflammasome assembly, we first generated recombinant AIM2 FL and the isolated AIM2 Hin in which N-terminal MBP tags are either left in place or removed by the tobacco etch virus (TEV) protease. The resulting AIM2 constructs all purify as monomers in size-exclusion chromatography ( Supplementary Fig. 1a,b). We compared the binding affinity of MBP-tagged and -untagged AIM2 variants by monitoring changes in fluorescence anisotropy of fluorescein amidite (FAM)-labelled 72-bp dsDNA (that is, FAM-dsDNA72).
MBP-AIM2 FL bound FAM-dsDNA72 nearly twofold more tightly than MBP-AIM2 Hin (Fig. 1b; Supplementary Table 1). Without MBP, AIM2 FL bound dsDNA72 at least 20-fold more tightly than isolated AIM2 Hin . Moreover, both tag-less AIM2 variants bound dsDNA72 significantly more tightly than their MBP-tagged counterparts (Fig. 1b). Unlike the other AIM2 variants, the apparent binding constant of AIM2 FL changed with FAM-dsDNA72 concentrations in our assays (compare Fig. 1b with Supplementary Fig. 1c), indicating that it binds even more tightly than the detection limit of our instrument (B0.5 nM). These data suggest that N-terminal MBP interferes with dsDNA binding of both AIM2 FL and isolated AIM2 Hin , and that AIM2 PYD plays a major positive role in dsDNA binding by AIM2.
Competition electrophoretic mobility shift assays with dsDNA fragments containing multiple AIM2 Hin -binding sites can test whether the initiation of the AIM2 inflammasome assembly on dsDNA proceeds via a two-state oligomerization binding mode 23,28 as opposed to the previously proposed non-interactive binding mechanism 32,33 : no partially occupied intermediate dsDNA species are observed when a competitor is included 23,28 . Here as observed for full-length IFI16 (ref. 23), both AIM2 FL and isolated AIM2 Hin showed an all-or-none transition; however, the MBP-tagged variants showed intermediates, further supporting a negative effect of MBP tags in the oligomerization-driven dsDNA binding of AIM2 ( Fig. 1c versus d).
dsDNA binding and oligomerization is integrated. We then tested whether the dsDNA-binding affinity of AIM2 changes with the size of dsDNA, because such a behaviour is expected when ligand binding is dependent on oligomerization 13,23 . For instance, the apparent binding affinity would increase nonlinearly up to the 'optimal' oligomer dictated by nucleic acid sizes 23,28 . To characterize the DNA-binding property of AIM2 FL within the detection limit of our instruments, we used the reported salt concentration-dependent binding of AIM2 Hin (ref. 32) and performed binding assays with various dsDNA sizes at 400 mM KCl (Fig. 2). Even in this high salt condition, AIM2 FL robustly bound FAM-dsDNA72 ( Fig. 2a; the binding constant did not change with FAM-dsDNA72 concentrations, see Supplementary  Fig. 1d). Importantly, AIM2 FL bound the larger dsDNA more tightly (Fig. 2a), suggesting that oligomerization is integral to dsDNA binding. However, MBP-AIM2 FL , MBP-AIM2 Hin and AIM2 Hin all showed no detectable binding in this high salt condition ( Supplementary Fig. 1e), again supporting the positive role of AIM2 PYD in dsDNA binding. In 160-mM KCl, isolated    AIM2 Hin also bound the larger dsDNA more tightly (Fig. 2b). Finally, both AIM2 FL and isolated AIM2 Hin bound the footprintsize dsDNA (10 bp) with minimal affinity ( Supplementary  Fig. 1f), suggesting that oligomerization is important for high affinity binding of both AIM2 variants (the dsDNA-binding footprint of AIM2 Hin is B9 bp 32 and that of AIM2 FL is B12 bp, Supplementary Fig. 1g). Next, we performed competition binding assays to further investigate the relationship between dsDNA size and binding efficiency (we used dsDNA mass concentrations to normalize the number of available binding sites in each competitor; Supplementary Tables 5-7). Consistent with the direct binding data, both AIM2 FL and isolated AIM2 Hin bound larger dsDNA fragments significantly more tightly (Fig. 2c,d). We used 160 mM KCl to allow isolated AIM2 Hin to bind dsDNA; the dsDNA sizedependent binding was apparent for AIM2 FL at both 400 and 160 mM KCl, confirming that buffer salt concentrations do not alter the overall mechanism (see Supplementary Fig. 1h,i for 160 mM). The plots of half-maximal inhibition (IC 50 ) versus dsDNA size revealed a sigmoidal relationship where the difference in binding affinity between the near footprint-size dsDNA (dsDNA15) and dsDNA fragments larger than 300 bp can be as much as 4,000-fold for AIM2 FL and 150-fold for AIM2 Hin , respectively (Fig. 2e,f). We also assessed the cooperativity between the binding affinity and dsDNA size by fitting the data using the Hill equation (Fig. 2e,f). The fitted Hill constant near four in Fig. 2e suggests that the binding efficiency of AIM2 FL would improve 10,000-fold when the size of dsDNA is increased    Table 6. The plots of the binding efficiency versus the length of dsDNA for AIM2FL (e) and AIM2Hin (f). The binding efficiency was determined by normalizing the mean IC 50 of each fragment to that of dsDNA600, and the data were fit to the Hill equation (the Hill constant for (e) is 4.2 ± 0.2 and (f) is 3.7 ± 0.3; ± indicates s.d., nZ3). The 'threshold' oligomer is defined as the size of dsDNA (AIM2 cluster) required to exit the apparent lag phase, and the 'optimal' oligomer is the size of dsDNA (AIM2 cluster) required to reach the inflection point.
by only 10-fold. Furthermore, about 70-bp dsDNA was required to exit the lag phase ('threshold') and about 250-to 300-bp dsDNA fragments were required to achieve the 'optimal' efficiency for generating AIM2 FL dsDNA complexes (Fig. 2e). These dsDNA sizes in turn indicate that about 6 AIM2 FL molecules are required to assemble a 'threshold' oligomer and about 24 AIM2 FL molecules will generate an 'optimal' oligomer ( Fig. 2e). The observed dsDNA size-dependent binding also correlates with a previous in vivo observation in which the interleukin-1b secretion activity increased cooperatively between 10 and 80 bp transfected dsDNA 32 . Overall, the 'digitized' nucleoprotein complex-forming activity of AIM2 suggests that dsDNA can act as a 'molecular ruler' to control the assembly of the inflammasome in a switch-like mechanism.
Mutagenesis studies support the positive role of AIM2 PYD . Previously, we found that several highly conserved surface side chains of IFI16 mediate its oligomerization-driven dsDNAbinding mechanism 23 (Fig. 3a). For AIM2, several equivalently positioned surface side chains mediate the auto-oligomerization of isolated AIM2 PYD in vivo 34 and interaction with ASC PYD in vitro 7 (for example, Leu10, Leu11 and Phe27 in Fig. 3b). However, whether these side chains have any role in dsDNA binding remains unknown. To further test the positive role of AIM2 PYD in dsDNA binding, we then generated a panel of surface mutants based on our study of IFI16 (ref. 23) and sequence conservation (Fig. 3a,b; none of these side chains are implicated in the alleged autoinhibition of AIM2 (refs 32,33), see also below). Almost all of these PYD mutants significantly disrupted the dsDNA-binding activity of AIM2 FL (Fig. 3c), supporting that oligomerization of PYD plays a major positive function in dsDNA binding. Xiao and colleagues proposed that a unique acidic surface of AIM2 PYD not present in other related ALR docks to the basic dsDNA-binding surface of AIM2 Hin , thus stabilizing the autoinhibited conformation in the absence of dsDNA33 (Fig. 3a,b; designated 'acidic patch'; Asp19, Glu20, Glu21 and Asp23). Such an autoinhibitory model entails that neutralizing the acidic patch would allow AIM2 FL to bind dsDNA more tightly. However, D19A-E20A-E21A-D23A-AIM2 FL failed to bind FAM-dsDNA72 (Fig. 3c). This observation disagrees with the inhibitory role of the acidic patch, but is again consistent with the idea that AIM2 PYD plays a positive role in dsDNA binding.
The oligomerization of AIM2 Hin is shared with murine p202. In contrast to the dsDNA-binding HIN200 domains of related IFI16 (ref. 23), our dsDNA-binding studies suggest that AIM2 Hin alone oligomerizes on dsDNA (Figs 1c and 2b,d,f). On the other hand, a murine ALR named p202 inhibits the activity of AIM2 by binding to AIM2 Hin with its tetrameric second HIN200 domain (p202 HinB ); p202 HinB does not bind dsDNA 38 . Several p202 HinB side chains implicated in tetramerization 38 are conserved in AIM2 Hin (Fig. 4a,b). To test whether AIM2 Hin uses similarly positioned side chains as p202 HinB to cluster on dsDNA, we mutated the indicated side chains in Fig. 4a,b on both AIM2 FL and isolated AIM2 Hin . We found mutations distal to the dsDNAbinding surface significantly decreased dsDNA binding by both AIM2 FL and AIM2 Hin (Fig. 4c,d). These results not only support the idea that the oligomerization of AIM2 Hin is important for dsDNA binding but also suggest that the oligomerization of AIM2 Hin is an evolutionarily conserved feature.
AIM2 PYD is required to oligomerize when dsDNA is in excess. When basal AIM2 encounters foreign dsDNA in the cytoplasm, the individual molecules must assemble into the inflammasome even in the presence of excess binding sites (for example, nearly 400,000 binding sites are in the genome of one F. tularensis). To test this idea, we labelled two separate AIM2 FL populations with a  However, unlike IFI16 that required at least 60-bp dsDNA 23 , FRET signals were detected from dsDNA fragments as short as 24 bp, suggesting that the minimal binding unit for AIM2 oligomerization is a dimer compared with a tetramer for IFI16. Consistent with our competition assays (Fig. 2), plotting the normalized binding efficiency versus dsDNA length from the FRET assay data also suggests a cooperative relationship in which the binding affinity of AIM2 FL can increase as much as 1,000-fold when the size of available dsDNA is 10 times longer (the Hill constant is B3; Fig. 5c). Labelled AIM2 Hin populations failed to generate FRET signals at 160 mM KCl ( Supplementary Fig. 1j,k); however, we detected FRET signals from labelled AIM2 Hin if the salt concentration of the reaction buffer was lowered to 60 mM KCl (Fig. 5d). Nevertheless, unlike AIM2 FL , FRET signals from labelled AIM2 Hin also peaked at the dsDNA concentration equivalent to the amount of AIM2 Hin present in these assays, but decreased with excess dsDNA (Fig. 5d). Also, unlike AIM2 FL , the peak amplitude was correlated with the size of each dsDNA (Fig. 5d). These observations suggest that the AIM2 Hin oligomers are likely different from those assembled AIM2 FL , and that AIM2 PYD is required for robust dsDNA binding and polymerization in the presence of excess dsDNA. In addition, the observed cooperative relationship between dsDNA size and  oligomerization activity (Fig. 5c) is consistent not only with our competition experiments (Fig. 2e) but also with the previous in vivo observation 32 , thus further supporting our 'digital ruler' concept in the regulation of the AIM2 inflammasome.
apo-AIM2 FL can auto-oligomerize. The autoinhibitory model entails that dsDNA is required to unlock monomeric AIM2 and initiate oligomerization 32,33 . By contrast, because untagged AIM2 FL binds dsDNA much more tightly than AIM2 Hin , we hypothesized that the role of dsDNA is to simply increase the local concentration of AIM2 by acting as a 'one-dimensional ruler,' consequently improving the prospects for forming AIM2 PYD AIM2 PYD encounter complexes. This new model entails that dsDNA-free AIM2 FL should be able to oligomerize on its own if the concentration threshold is met. On the other hand, apo-AIM2 FL should remain monomeric according to the autoinhibitory model. To test these opposing predictions, we used negative stain electron microscopy (ns-EM) to probe the oligomeric state of apo-AIM2 FL at various concentrations.
Disagreeing with the autoinhibitory model, we found that apo-AIM2 FL forms filaments in a protein concentration-dependent manner (Z1 mM; Fig. 6a, Supplementary Fig. 2a). By contrast, we did not observe any auto-assembled AIM2 Hin filaments (Fig. 6b), and MBP-AIM2 FL showed aggregates clearly different from the filamentous structures observed from untagged AIM2 FL (Supplementary Fig. 2b). AIM2 FL filaments were detected even at 1.6 M NaCl, thus suggesting that they are more resilient against the environment than the ASC PYD filament 7 ( Supplementary  Fig. 2c). Considering the auto-oligomerization activity, we kept the concentration of wild-type AIM2 FL as low as possible in our biochemical assays (typically o100 nM; Figs 2-5). Moreover, we observed saturating binding isotherms in most of our assays (Fig. 2a), suggesting that auto-oligomerization did not cause any significant artifacts. Closer inspection of the electron micrographs revealed that DNA-free AIM2 FL filaments assume 'Brussels Sprout'-like structures in which the central filaments ('core stems') are decorated with speck-like densities at the periphery ('sprouts') ( Fig. 6c, Supplementary Fig. 2c,d). Although the core stem appeared well ordered, the peripheral specks appeared random and often disordered (Fig. 6c, Supplementary Fig. 2c,d). On the basis of the reported auto-filamentation activity of isolated AIM2 PYD (refs 7,34), we suspected that AIM2 PYD forms the core stem and the AIM2 Hin clusters are flexibly attached via the intrinsically disordered linker region (50 amino acids); the 9-nm diameter of the core stem also corresponds to the width of the ASC PYD filament 7 . To further test this arrangement, we generated an AIM2 FL construct with enhanced green fluorescent protein (eGFP) fused on the C-terminus; we added eGFP at the C-terminus so that it would not directly interfere with the putative oligomeric structure of AIM2 PYD (Fig. 6d, cartoon). The electron micrograph of AIM2 FL -eGFP also showed similar filament morphology as untagged AIM2 FL where the core stem ARTICLE is randomly decorated by peripheral densities (Fig. 6d). The peripheral densities were also more apparent than those from untagged AIM2 FL , likely reflecting the added size of eGFP.
dsDNA-binding deficient mutants fail to auto-oligomerize. If the mutations we have identified in the present study indeed affect oligomerization, but not direct protein-dsDNA interactions, we reasoned that they should also disrupt the autofilamentation activity. Hence, we examined these AIM2 mutants using ns-EM. The Brussels sprout-like filaments were detected from the AIM2 FL mutants that lacked any major defects in dsDNA binding ( Fig. 6e and Supplementary Fig. 3a,b). However, the AIM2 FL mutants with impaired dsDNA binding did not show any auto-assembled filaments regardless of whether a mutation is located on the PYD or HIN200 domains (Fig. 6e, Supplementary  Fig. 3a). The failure to auto-assemble by mutating the PYD side chains suggests that it is the filamentation activity of AIM2 PYD that positively contributes to dsDNA binding. Moreover, the lack of auto-oligomerization resulting from mutating the HIN200 domain side chains suggests that although the oligomerization activity of AIM2 PYD outweighs that of AIM2 Hin , both domains have positive functions in assembling AIM2 FL filaments in the presence or absence of dsDNA.
Helical symmetry of the AIM2 PYD filament. Several previous studies reported the direct interaction between AIM2 PYD and ASC PYD (refs 7,19,20). The helical architecture of the ASC PYD filament is known 7 ; however, whether or not the upstream AIM2 oligomer provides a 'polymerization template ' via a congruent oligomeric architecture as seen from the Rig-IMAVS interaction 9 is an open question. Thus, we determined the helical symmetry of the core stem of the AIM2 FL filaments. The average power spectrum of the AIM2 FL filaments obtained from ns-EM is remarkably similar to that of the ASC PYD filament (Fig. 7a, see also ref. 7), which is an B90-Å wide, six-start helix with three-fold symmetry 7 . These parameters also agree with our proposition in which the AIM2 PYD filament constitutes the core stem (Fig. 6). On the basis of the consistent helical symmetry, we generated a homology model of the AIM2 PYD filament using the cryo-EM structure of the ASC PYD filament as a template 7 , where we found that all the side chains we have identified to be important for dsDNA binding and auto-oligomerization are located at the subunit interfaces (Fig. 7b,c). Overall, our EM analysis suggests that the upstream AIM2 PYD filament provides a structural template for the polymerization of downstream ASC PYD (Fig. 1a).
PYD interactions dictate the filament architecture. A previous cell-based imaging study showed that isolated AIM2 PYD and AIM2 FL form filamentous aggregates, but AIM2 Hin failed to form such structures 34 ; whether dsDNA (transfected plasmid) is part of the filamentous AIM2 FL aggregates is unknown. Our present study is consistent with this in vivo observation 34 , as dsDNA-free AIM2 FL assembles into filaments via its PYD. However, in principle, the HIN200 domains of AIM2 FL could bind dsDNA along its length, and thus might also generate an ordered filamentous structure. Thus, to further resolve whether AIM2 PYD or AIM2 Hin oligomers dictate the overall architecture of dsDNAbound AIM2 FL , we determined the morphologies of AIM2 FL and AIM2 Hin bound to l-phage dsDNA (ldsDNA) using ns-EM. Isolated AIM2 Hin did not show any ordered filaments, but displayed random 'beads on a string'-like clusters on ldsDNA (Fig. 8a). By contrast, the Brussels sprout-like filaments were no longer detected on adding dsDNA to AIM2 FL , but new larger filaments about two-to three-times wider than the DNA-free filaments appeared in the micrographs (20-25 nm; Fig. 8b), indicating dsDNA binding. Together, these observations suggest that AIM2 Hin binds dsDNA and clusters randomly, and that AIM2 PYD oligomers underpin the filamentous architecture of dsDNA-bound AIM2 FL . ldsDNA is about 50 kb and displayed random-coil structures (Fig. 8b, Supplementary Fig. 3c); however, all observed dsDNAbound AIM2 FL filaments seemed well ordered, further suggesting that PYD-PYD interactions, but not AIM2 Hin -dsDNA interactions (Fig. 8b), dictate the overall architecture of ldsDNA-bound AIM2 FL filaments. Because we can observe unbound ldsDNA in our AIM2 FL dsDNA samples (Fig. 8b), our EM experiments also revealed that AIM2 FL filaments assemble from random positions on dsDNA and that the filaments can assemble even in the presence of excess dsDNA (Fig. 8b). These results not only corroborate our FRET assays in which AIM2 FL oligomerized in the presence of excess dsDNA (Fig. 5) but also are consistent with the oligomerization activity of IFI16, which also formed filaments in the presence of excess dsDNA via its PYD 23 . Several filaments apparently merged laterally and became intertwined, likely reflecting the punctate-like AIM2 inflammasome structures observed from in vivo studies 20,32 (Fig. 8c,d). In addition, we used supercoiled and nicked circular plasmids to investigate whether the morphology of AIM2 FL filaments can be altered by the structure of the dsDNA platform. The AIM2 FL filaments assembled on these nonlinear dsDNA molecules were isomorphic to the ldsDNA-bound AIM2 FL filaments, also suggesting that protein-protein interactions indeed dominate the overall architecture of the AIM2 FL dsDNA complexes ( Supplementary  Fig. 3d).
To further test that AIM2 PYD oligomers, but not those assembled by AIM2 Hin , underpin the filamentous structure of dsDNA-bound AIM2 FL , we also examined the morphology of several ldsDNA-bound AIM2 FL mutants with defective dsDNAbinding/auto-assembly activities. We first identified conditions that allow these AIM2 FL mutants to bind dsDNA (160 mM KCl; same as all wild-type EM experiments); all the defective mutants still bound dsDNA significantly more weakly than wild type (Supplementary Table 1). Under these conditions, we found that disrupting the oligomerization activity of AIM2 Hin still allowed the full-length protein to assemble into isomorphic filaments on ldsDNA as wild type (Fig. 8e-g). The I46D mutation located in the PYD also resulted in wild type-like AIM2 FL filaments once bound to ldsDNA (Fig. 8h). However, L10A-L11A-AIM2 FL showed a heterogeneous nucleoprotein filament population (Fig. 8i). More strikingly, D19A-E20A-E21A-D23A-AIM2 FL (acidic patch) displayed disordered clusters similar to ldsDNAbound isolated AIM2 Hin (Fig. 8j). Our homology model indicates that Leu10, Leu11 and Ile46 mediate the radial interactions in the AIM2 PYD filament, while the acidic patch mediates the axial interactions (Figs 7b and 8k). Thus, these results suggest that the dsDNA scaffold can at least partially restore the filamentous structure if the radial interactions in the AIM2 PYD filament are compromised (Figs 7b and 8k). However, disrupting the axial interactions seems to be detrimental to the filamentous structure even when bound to the dsDNA scaffold (Figs 7b and 8k). Overall, we concluded that filamentous AIM2 PYD oligomers underpin the architecture of dsDNA-bound AIM2 FL polymers.

Discussion
We have presented here evidence supporting an oligomerizationdriven activation mechanism for initiating the assembly of the AIM2 inflammasome in the absence of the currently prevailing autoinhibitory mechanism 32,33 (Fig. 9). For instance, the basal concentration of AIM2 is presumably sub-nanomolar under normal conditions, but is dramatically raised on pathogenic invasion (AIM2 is overexpressed by type-1 interferons by at least 200-fold) 18,20,39 . Thus, in the absence of cytosolic dsDNA, we propose that AIM2 would fail to oligomerize and induce the polymerization of ASC, due to its low basal concentration. For instance, in physiologically relevant reaction conditions, AIM2 can assemble into a filament on dsDNA larger than 300 bp even at pico-molar concentrations, but it requires nearly 10,000-fold more AIM2 molecules to auto-assemble filaments without dsDNA (Figs 2 and 5, and Supplementary Fig. 2a). On the other hand, because oligomerization is coupled with dsDNA binding, individual AIM2 molecules are capable of finding one another even in the presence of excess dsDNA (Fig. 5). Thus, when foreign dsDNA invades, basal AIM2 would rapidly cluster into a seed filament necessary to nucleate the polymerization of ASC.
The assembly of Rig-I and MDA5 filaments on foreign dsRNA is intrinsically regulated by the ATP turnover at their helicase domains [28][29][30] ; the filament assembly of Rig-I is further regulated by the recognition of 5 0 -triphosphate of dsRNA 1,30 . However, ALRs lack any dsDNA sequence specificity and auto-assemble into filaments without any cofactors 31 . These observations raise the question of whether ALRs are regulated at all. We propose that the dsDNA length-dependent binding provides a key to answering this question. Although MDA5 can assemble into filaments along the length of dsRNA, the ability to discriminate ARTICLE between 'short' and 'long' dsRNA by MDA5 is not as pronounced as that of AIM2 or IFI16 (refs 23,28), as if separating the ligandbinding domain from the polymerization domain generates greater dependence on the size of the nucleic acid scaffold for assembly. 'Long,' naked cytosolic dsDNA is rare, and Knipe and colleagues postulated that IFI16 would selectively recognize foreign dsDNA by the degree of chromatinization 12,40,41 . Indeed, the highly cooperative relationship between the binding affinity and the size of dsDNA can clearly define an 'off' and 'on' state for assembling the AIM2 nucleoprotein filament (Figs 2 and 5). Moreover, the size of dsDNA required to build the 'threshold oligomer' (Figs 2 and 5) also correlates with a previous in vivo study in which about 80-bp cytosolic dsDNA was required to induce robust interleukin-1b secretion 32 . Taken together, our data suggest that the size of dsDNA can act as a powerful 'molecular ruler' that can regulate the initiation of the AIM2 inflammasome assembly in a switch-like mechanism.
Unlike the HIN200 domains of IFI16 (ref. 23), we found that AIM2 Hin oligomerizes on dsDNA, which appears to be at least partially responsible for the more robust dsDNA-binding activity of AIM2 than IFI16 in vitro 23,32 . It is tempting to speculate that the oligomerization of AIM2 Hin has not been selected against because cytosolic AIM2 is much less likely to encounter self-dsDNA than nuclear IFI16. On the other hand, p202 HinB does not bind dsDNA, but forms a tetramer that prevents AIM2 from clustering on dsDNA 38 . Our finding of the oligomerization activity of AIM2 Hin further strengthens this finding, as p202 HinB would physically interfere with clustering of AIM2 Hin on dsDNA. Moreover, not all the side chains implicated in the tetramerization of p202 HinB are conserved in AIM2 (ref. 38; Fig. 4a,b), thus preventing spurious autooligomerization. Nevertheless, our experiments showed that isolated AIM2 Hin oligomerizes into random clusters on dsDNA without any filamentous architecture (Fig. 8a) and that disrupting the oligomerization of AIM2 Hin still results in filaments isomorphic to wild type ( Fig. 8e-g). Thus, we hypothesize that the role of AIM2 Hin oligomerization is essential, yet limited to generating a 'seed' nucleation unit preceding the filament growth ( Fig. 9). AIM2 is overexpressed by type-1 interferon pathways on pathogenic invasion 31,39 . Our finding of auto-assembly suggest that in principle, dsDNA binding is not a priori required to initiate assembly. We hypothesize that the auto-oligomerization of AIM2 (Fig. 6) can also enhance the host defence response (Fig. 9). For example, the pre-assembled AIM2 platforms would be able to survey the cytoplasm more effectively because of the larger contiguous surface area. The AIM2 Hin clusters could also increase the dsDNA-binding activity via avidity, and the AIM2 oligomers would immediately nucleate the polymerization of ASC without binding foreign dsDNA. However, this could be a double-edged sword: the auto-oligomerization activity of AIM2 could also underlie several autoimmune disorders in which AIM2 is overexpressed via hyperactive interferon pathways [14][15][16] , as it could cause persistent inflammasome activity without any pathogenic dsDNA.
The symmetry of the AIM2 filament suggests the structureactivity relationships in the assembly. For instance, the three-fold symmetry of the six-start helix correlates with the dimeric minimal binding unit of AIM2 observed from our FRET assays (Fig. 5b,c; 2 Â 3 ¼ 6). The requirement for clustering about six AIM2 molecules (Figs 2e and 5c) to generate a robust 'threshold oligomer' also correlates with one hexameric base of the six-start helix. Furthermore, the optimal oligomer size of 20-25 AIM2 molecules (Figs 2e and 5c) also suggests that about four hexameric rings may need to stack up to assemble an optimally stable AIM2 nucleoprotein filament. Finally, because the ASC PYD filament also has the same helical architecture as the AIM2 PYD filament, it is tempting to speculate that the assembly of the upstream filament is directly coupled to the downstream effector activation, thus achieving maximal cooperativity.
Both PYDs and CARDs belong to the death-domain (DD) superfamily 36,42 . Despite their widely variable primary sequences, all known CARDs and PYDs share essentially the same tertiary structure (six-helix bundles) 36,42 . Several DD proteins are capable of assembling into helical filaments 7,9,43 , and the PYDs are mostly distinguished from the CARDs by one extended loop region between helices 2 and 3 (refs 36,42). Thus, a major outstanding question regarding the signalling mechanism of both PYDs and CARDs has been how one DD protein specifically selects its interacting partner. Although all DD proteins utilize essentially the same set of interaction surfaces for oligomerization 36,42 , it is becoming clear that the resulting oligomers display vastly diverse helical architectures 7,9,43 . Indeed, it was recently shown that identical helical symmetry underlies the mechanism by which the Rig-I CARD tetramers nucleate the MAVS CARD filament 9 .
It had yet to be tested whether such a symmetric interaction is a unifying theme in assembling filamentous supramolecular signalling platforms by both CARDs and PYDs, especially when both upstream and downstream DD domains can assemble into infinite filaments as observed from AIM2 and ASC. The consistent helical symmetry between the AIM2 PYD and ASC PYD filaments suggests that the corresponding polymerization trajectory between the upstream and downstream oligomers not only underpins the assembly of the inflammasomes but also can be a key to defining the specificity of the DD-family proteins.

Methods
Reagents. All DNA below 90 bp were purchased from Integrated DNA Technologies, and DNA of greater length was synthesized by PCR. FAM-labelled DNA was also purchased from Integrated DNA Technologies. DyLight-550 and DyLight-650 maleimides were purchased from Thermo.
Recombinant AIM2 constructs. Full-length AIM2 variants (residues 1-343) were cloned into a pET21 vector (Novagen) with a modified N-terminal MBP tag with a TEV protease recognition site. HIN200 variants (residues 144-343) were cloned into a pET28 vector with a modified N-terminal small ubiquitin-like modifier (SUMO) protein tag or the previously described pET21 vector for assays including an MBP tag. All clones were transformed into Escherichia coli strain ER2566 (NEB). Cells were grown at 37°C to OD 600 0.4-0.7, induced with 0.2 mM isopropyl b-D-1-thiogalactopyranoside, expressed for at least 15 h at 18°C, and then harvested.
For purification of unlabelled protein, cell pellets were resuspended in 20 mM HEPES pH 7.4, 400 mM NaCl, 5% glycerol, 1 mM EDTA and 1 mM dithiothreitol (DTT) while SUMO-tagged construct cell pellets were resuspended in 20 mM HEPES pH 7.4, 400 mM NaCl, 5% glycerol, 20 mM imidazole and 3 mM betamercaptoethanolamine (bME); a protease cocktail consisting of phenylmethyl sulfonyl fluoride, benzamidine, leupeptin and pepstatin A was added, as well as lysozyme and DNase I. Cells were lysed by sonication and the insoluble fraction was removed by centrifugation. The supernatants were applied to amylose resin (NEB) for MBP-tagged constructs or Ni-NTA resin (QIAgen) for SUMO-tagged constructs. A wash of 10-15 CV of resuspension buffer was applied, and then the protein was eluted in either 20 mM HEPES pH 7.4, 120 mM NaCl, 2% glycerol, 30 mM maltose and 3 mM bME for MBP-tagged or 20 mM HEPES pH 7.4, 120 mM NaCl, 2% glycerol, 300 mM imidazole and 3 mM bME for SUMO-tagged constructs. The elution was then applied to a HiTrap-SP Column (GE Healthcare) and the protein eluted off a gradient of 20 mM HEPES pH 7.4, 120 mM-1M NaCl, 2% glycerol and 3 mM bME. Fractions containing highly purified protein were collected. For biochemical assays using MBP-tagged protein, these fractions were then applied to a Superdex200 16/600 gel-filtration column (GE Healthcare) equilibrated in 20 mM HEPES pH 7.4, 400 mM KCl, 2% glycerol, 1 mM EDTA and 1 mM DTT. For biochemical assays using untagged protein, the pooled fractions were diluted 10-fold with 20 mM HEPES pH 7.4, 750 mM NaCl, 2% glycerol, 20 mM imidazole and 3 mM bME, and TEV (MBP tag) or Ulp-1 (SUMO tag) was added, and the solution was dialysed at least 15 h against 20 mM HEPES pH 7.4, 120 mM NaCl, 2% glycerol, 20 mM imidazole and 3 mM bME. For full length, the solution was then re-applied to the HiTrap-SP column, and then eluted off in tandem with a HisTrap-FF (GE Healthcare) with 20 mM HEPES pH 7.4, 750 mM NaCl, 2% glycerol, 20 mM imidazole and 3 mM bME. For HIN200, the solution was applied to a HisTrap-FF column in tandem with a HiTrap-SP column, the HisTrap column was then removed and the protein was eluted from the HiTrap column in the same buffer as the full length. The elution fractions were applied directly to a Superdex75 16/600 gel-filtration column (GE Healthcare) equilibrated in 20 mM HEPES pH 7.4, 400 mM KCl, 2% glycerol, 1 mM EDTA and 1 mM DTT. Fractions containing the protein were then concentrated.  Figure 9 | A model for the assembly of the AIM2 inflammasome. AIM2 PYD is not auto-regulated. Depending on its cellular concentration, auto-assembly or dsDNA-mediated assembly will drive the initial filament formation. Importantly, basal AIM2 requires large dsDNA to generate energetically stable nucleoprotein complexes, because oligomerization is integral to dsDNA binding. The oligomerization of AIM2 Hin is important for auto-or dsDNA-mediated filament assembly, but the construction of the filamentous architecture is dictated by AIM2 PYD . The resulting AIM2 filaments then nucleate the assembly of the ASC filaments via corresponding helical architecture (ASC CARD is not shown in the filament for simplicity). NATURE COMMUNICATIONS | DOI: 10.1038/ncomms8827 ARTICLE For fluorescent labelling of proteins, after elution from their respective affinity columns, they were applied to a HiTrap-SP column and eluted using a gradient of 20 mM HEPES pH 7.4, 120 mM NaCl-1M NaCl, 2% glycerol and 1 mM TCEP. The solution was then divided into two, and to one was added DyLight-550 at a concentration of 4 Â (AIM2) and to the other was added DyLight-650 at a concentration of 4 Â (AIM2). Labelling proceeded for at least 15 h. Excess dye was quenched using 10 mM bME, and the solution was re-applied to their respective affinity columns. After extensive washing with 20 mM HEPES pH 7.4, 750 mM NaCl, 2% glycerol and 3 mM bME until no fluorescence could be detected in the flow through, the protein was eluted in wash buffer supplemented with either 30 mM maltose (full length) or 300 mM imidazole (HIN200). Cleavage and further purification proceeded as above. The dye:protein ratio was then calculated as per the manufacturer's instructions, which was B1:1.
Biochemical assays. All experiments were performed at least three times, the fits to data were generated by the Kaleidagraph software (Synergy). Fluorescence anisotropy-binding experiments were carried out in either 40 mM HEPES pH 7.4, 160 mM KCl, 5% glycerol, 0.1% Triton X-100, 1 mM EDTA, 5 mM DTT (herein referred to as 'buffer A') or 40 mM HEPES pH 7.4, 400 mM KCl, 5% glycerol, 0.1% Triton X-100, 1 mM EDTA and 5 mM DTT (herein referred to as 'buffer B') at room temperature as described in Morrone et al. 23 Förster resonance energy transfer experiments were carried out in either buffer A (for AIM2 FL and AIM2 Hin ) or buffer C (40 mM HEPES pH 7.4, 60 mM KCl, 5% glycerol, 0.1% Triton X-100, 1 mM EDTA and 5 mM DTT) for AIM2 Hin as described in Morrone et al. 23 Electrophoretic mobility shift assay experiments were carried out in buffer A. To a fixed amount of fluorescein-labelled dsVACV72 was added increasing concentrations of AIM2. The reaction was allowed to equilibrate at room temperature (at least 20 min), then applied to a 4% 116:1 acrylamide:bis-acrylamide Tris-borate-EDTA gel. The gel was run at 100 V in 1 Â Tris-borate-EDTA buffer and imaged using a Typhoon imager (GE Healthcare; excitation at 488 nm, emission at 532 nm).
Electron microscopy. AIM2 samples were adsorbed to glow-discharged carbon grids for 2 min, then blotted and transferred through two consecutive drops of 1% uranyl formate or 1% uranyl acetate for a total of 1-2 min. The carbon film was then quickly dried by aspiration. Images were collected with either a Philips BioTwin CM120 (FEI) at Johns Hopkins School of Medicine or Tecnai 12 at University of Virginia. For the dsDNAAIM2 complexes, ldsDNA and AIM2 constructs were incubated 30 min before EM sample preparation. The linearized plasmid was generated by digesting the pET28b vector (Novagen) with BamH1 (NEB). The nicked circle was generated by cutting pET28b with Nt.BspQI (NEB). The modified vectors were then agarose-gel purified.
Homology modelling. The crystal structure of AIM2 PYD (PDB ID: 3VD8) was aligned to individual protomers of the cryo-EM structure of the ASC PYD filament (PDB ID: 3J63) using Pymol (The PyMOL Molecular Graphics System, Version 1.7.4 Schrödinger, LLC). The root mean squared deviation of the individual alignment is o1 Å.
Symmetry determination. Micrographs of negatively stained AIM2 FL filaments were scanned using a Nikon CoolPix 8000 with a raster of 4.16 Å/pixel. Filaments were extracted using the e2helixboxer routine within EMAN2 (ref. 44), and the SPIDER software package 45 was used for subsequent steps. Overlapping boxes 96 pixels long were cut from these filaments, and 7,607 boxes were aligned against a preliminary reconstruction and windowed to 30 pixels to generate an averaged power spectrum.