There has been an increasing interest in all-optical analogues of electromagnetically induced transparency and Autler–Townes splitting. Despite the differences in their underlying physics, both electromagnetically induced transparency and Autler–Townes splitting are quantified by a transparency window in the absorption or transmission spectrum, which often leads to a confusion about its origin. While the transparency window in electromagnetically induced transparency is a result of Fano interference among different transition pathways, in Autler–Townes splitting it is the result of strong field-driven interactions leading to the splitting of energy levels. Being able to tell objectively whether an observed transparency window is because of electromagnetically induced transparency or Autler–Townes splitting is crucial for applications and for clarifying the physics involved. Here we demonstrate the pathways leading to electromagnetically induced transparency, Fano resonances and Autler–Townes splitting in coupled whispering-gallery-mode resonators. Moreover, we report the application of the Akaike Information Criterion discerning between all-optical analogues of electromagnetically induced transparency and Autler–Townes splitting and clarifying the transition between them.
Coherent interactions of light with multilevel atoms can dramatically modify their optical response via quantum interferences between various excitation pathways, or via strong-coupling-field-induced energy level splitting. The process known as electromagnetically induced transparency1,2,3,4 (EIT) is the result of Fano interferences5,6 that require coupling of a discrete transition to a continuum. EIT creates a narrow transparency window by eliminating a resonant absorption. EIT has a rich variety of applications such as ultraslow light propagation7, light storage8,9, dissipation-free light transmission and nonlinear optics with weak light. Autler–Townes splitting10 (ATS) involves field-induced splitting of energy levels and is not associated with interference effects; yet it creates a transparency window because of the doublet structure in the absorption profile. It has been used for measuring transition dipole moments11 and quantum control of spin–orbit interactions12.
Coherent processes leading to EIT and ATS have been studied in: atomic gases7,13, atomic and molecular systems14, solid-state systems15, superconductors16,17, plasmonics18, metamaterials19, optomechanics20,21, electronics22, photonic crystals23 and whispering-gallery-mode microresonators (WGMRs)24,25,26,27,28,29,30,31,32,33. Systems in which EIT and ATS have been studied are listed in Fig. 1. Using the identifications listed in Fig. 1 and Table 1, it can be easily shown that equations and relations describing the EIT and ATS in one of these systems are equivalent to those in the others. The existence of EIT and ATS in plasmonics, metamaterials, photonic crystals and WGMRs is critical for on-chip control of light at room temperature. EIT and ATS in these systems do not suffer from experimental complexities that are common in solid state and atomic media (for example, a low-temperature environment, the need for stable lasers matching the atomic transitions or propagation-scaling limitations because of control-field absorption).
WGMRs have been a fruitful platform to study various aspects of classical and all-optical analogues of EIT and ATS. Fano resonances and EIT have been observed in a silica microsphere28, a polydimethyl-siloxane-coated silica microtoroid with two WGMs29, two directly coupled silica microspheres25,30, two indirectly coupled silicon microrings26, and indirectly coupled microdisk and microtoroid31. In these EIT implementations, two frequency-degenerate WGMs of high- and low-quality factors (Q) are coupled, and destructive interference of the optical pathways cancels the absorption leading to a narrow transmission peak. If a frequency detuning is introduced, the transmission spectra show sharp asymmetric Fano resonances. ATS has been observed in directly coupled silica microspheres25, directly coupled silica microtoroids34, hybrid systems formed by directly coupling polydimethyl-siloxane-coated silica microtoroids with silica microtoroids or microspheres35 and directly coupled polyethylene and quartz disks in the THz domain36. In these systems, ATS originates from the lifting of the frequency degeneracy of the eigenmodes, hence their splitting into two resonances because of strong inter-resonator coupling. The spectral region between the split modes corresponds to a transparency window. A scatterer-induced coupling between the frequency-degenerate clockwise and counter-clockwise travelling modes of a WGMR can also lead to mode-splitting37,38,39. This has been used to detect and measure nanoscale objects with single particle resolution37 and to directly measure the Purcell factor40.
The effects of ATS in the absorption profile resemble that of EIT, in that both of the processes display a transparency window, that is, a reduction in the absorption profile. This similarity has led to much confusion16,41,42 and many discussions17,43,44,45,46 on how to discriminate between EIT and ATS just by looking at the experimentally obtained absorption/transmission spectra, without prior knowledge on the system. The sharpness of the dip in the absorption and the imaginary part of the susceptibility (or the peak in the transmission) has been used as an intuitive and informal criterion to judge whether EIT takes place or not. However, such a test is very subjective. For example, a peak in the transmission spectrum is in general much sharper than the dip in the absorption spectrum of the same system. Therefore, one has to first decide whether to focus on the sharpness of the transmission or the sharpness of susceptibility/absorption. Moreover, system-specific parameters affect the output spectra. Namely, relaxation rates, coupling strengths and cleanliness of the samples differ among different systems and determine the sharpness of the spectrum. For example, these parameters in superconducting systems are at least one to two orders-of-magnitude less than their atomic counterparts; hence, the dip in the susceptibility of superconducting systems is lesser sharp than that of alkaline atoms47. Therefore, objective and system-independent methods and tests are needed to make claims of EIT. Since identifying whether an experiment involves EIT or ATS is important for applications, objective methods to discriminate between them have been sought.
Many studies have been carried out to identify the conditions to observe EIT or ATS43,44,45,46,47. Recently Anisimov et al.17 have proposed to use the Akaike Information Criterion (AIC)48 as an objective test to discern EIT from ATS in experimentally obtained absorption or transmission spectra, and to identify the spectra from which one cannot derive a conclusive result on whether EIT or ATS has played a role. They have successfully applied this test to an experiment with a one-dimensional (1D) superconducting transmission line coupled to a flux qubit, concluding that the reported data16 do not support the claim of EIT. In a recent study, Giner et al.49 demonstrated the suitability of the AIC criterion to evaluate EIT and ATS in experiments with cold caesium atoms. Oishi et al.50 suggested that the transient response of a system can be used to discern EIT from ATS. The transient response exhibits a sharp spike when the system is prepared for EIT; however, when it is prepared for ATS, an oscillatory signal attributed to coherent energy exchange between the resonators is observed. Note that AIC discriminates EIT from ATS in the frequency domain, whereas the transient response method discriminates them in the time domain.
Up to this date, there was no study to discern EIT from ATS in coupled optical WGMRs. Here we systematically investigate Fano resonances, EIT and ATS in coupled microtoroids, identify the transition from EIT to ATS (and vice versa) and use AIC to discern EIT from ATS from experimentally obtained transmission spectra. Our results show the suitability of the AIC for discriminating EIT from ATS in systems of coupled WGMRs.
Our system consists of two directly coupled silica microtoroidal WGM resonators μR1 and μR2, with μR1 coupled to a fibre taper (Fig. 2). We fabricated the silica microtoroids at the edges of two separate silicon wafers, such that when the wafers were brought closer to each other, the microtoroids began exchanging energy. The wafers were placed on separate nanopositioning systems so that the distance between the microtoroids was finely tuned to control the coupling strength κ between them. The coupling strength κ decreases exponentially with increasing distance. The probe light in the 1,550-nm band from a narrow linewidth tunable laser was coupled into a WGM of μR1 via the fibre taper. The same fibre taper was also used to couple out the light from the WGM. The output light was then sent to a photodetector connected to an oscilloscope, to obtain the transmission spectra as the wavelength of the input light was linearly scanned. Fibre-based polarization controllers were used to set the polarization of the input light for maximal coupling into WGMs. A thermoelectric cooler was placed under one of the wafers so that resonance frequency of the WGM of interest in a microtoroid could be tuned via the thermo-optic effect, to control the frequency detuning of the chosen WGMs in the two microtoroids. A tuning range of 8 GHz was achieved. The microtoroids supported many WGMs in the same band but with different quality factors Q, which is the signature of the amount of loss or dissipation (the lower the loss, the higher the Q and the narrower the linewidth of the resonance mode). This allowed us to investigate the effects of Q of the selected modes on the Fano, EIT and ATS processes by choosing WGM pairs with different Q-contrasts. In addition to the ability of choosing different WGM pairs, our set-up allowed us to investigate Fano, EIT and ATS processes and the transitions among them by steering the system independently via the coupling strength or the frequency detuning between the selected WGMs. In our experiment, we selected three different sets of WGM pairs with the intrinsic quality factors (QμR1 and QμR2) of (1.91 × 105, 7.26 × 107), (1.63 × 106, 1.54 × 106) and (1.78 × 106, 4.67 × 106). Note that the intrinsic Q includes all the losses (for example, material, radiation and scattering) except the coupling losses. Since the probe light is input at the μR1 side with a fibre taper, the Q of the μR1 is smaller than the above intrinsic Q-values because of the additional coupling losses (that is, μR1 has more loss than μR2).
Analogy between coupled resonators and three-level atoms
Here we will elucidate the analogy between atomic and photonic coherence effects leading to EIT and ATS. Using coupled-mode theory, we find the equations of motion for the complex intracavity field amplitudes A1 and A2 in the steady state as
where and γ2 denote the total losses in μR1 and μR2, respectively, is the intrinsic loss of μR1 and γc is the coupling loss between the fibre taper and μR1, δ1=ω−ω1 and δ2=ω−ω2 denote the detuning between the frequency ω of the probe light field Ap and the resonance frequencies ω1 and ω2 of the WGMs, and κ is the coupling strength between the WGMs. In the EIT and ATS experiments, we set ω1=ω2=ω0 via the thermo-optic effect by thermally tuning the frequency of one of the WGMs to be equal to the frequency of the other. Consequently, for the degenerate frequencies ω1 and ω2 we have Δ=ω2−ω1=0, and in the rotated frame (ω0→0) we have δ1=δ2=ω. In addition, note that in the system depicted in Figs 1b and 2 the input and output ports are at the side of μR1; hence, the output field is given as where the intracavity field A1 can be written as with
where we used αk=iωk+γk/2, with k=1, 2. This solution χ has a form similar to the response of an EIT medium (three-level atom) to a probe field. Then, we can write the normalized transmission T=|Aout/Ap|2 as
where χi is the imaginary part of χ. Since and we can rewrite the transmission as
Thus, it is sufficient to analyse the behaviour of χi to understand the conditions leading to EIT or ATS (Supplementary Note 1). This is similar to considering the imaginary part of the susceptibility that determines the absorption of a probe in an atomic system. This analogy between the atomic media and the coupled WGMRs can be extended to other systems by using the analogy map given in Fig. 1 and Table 1.
The eigenfrequencies of this coupled system can be found from the denominator of equation (3) and are given as ω±=(−iα1−iα2±β)/2, with β2=4κ2−(α1−α2)2. This reveals a transition at the threshold coupling strength 2|κT|=α1−α2=(γ1−γ2)/2, where we have used the fact that in our system γ1>γ2, as stated in the previous section. We define the regimes where κ<κT and κ>κT as the weak- and strong-driving regimes, respectively, and κ=κT as the transition point. Using the eigenfrequencies, we can rewrite the expression in equation (3) as
where χ±=∓(ω±+iα2)/β=−1/2±iξ/β satisfying χ++χ−=−1 and ξ=(γ1−γ2)/4.
In the weak-driving regime quantified by κ<κT, β is imaginary, that is β=iβi and Re(β)=βr=0. This leads to real χ± (that is, Im(χ±)=χ±i=0) with Re(χ±)=χ±r=−1/2±ξ/|β|, and imaginary eigenfrequencies with Re(ω±)=ω±r=0 and Im(ω±)=ω±i=−ζ±|β|/2, where ζ=(γ1+γ2)/4. Thus, the supermodes have the same resonance frequencies and are located at the centre of the frequency axis but have different linewidths quantified by their imaginary parts. The imaginary parts of χ are then given by
which consists of two Lorentzians centred at ω=0 with different signs (that is, the first term in the equation is negative, whereas the second term is positive). The transmission in this regime becomes
where all the parameters whose values cannot be determined precisely are incorporated into the coefficients Ck and Γk that can be used as free parameters to perform curve-fitting to experimentally obtained transmission spectra. Clearly, the opposite signs of the Lorentzians lead to a destructive interference that results in a transmission profile exhibiting a transparency window similar to that of EIT.
In the strong-driving regime, where κ>>κT is satisfied, β=2κ is real (that is, βi=0 and βr=2κ) implying ω±=−iζ±κ, that is the resonances are located at frequencies ±κ with a spectral distance of 2κ between them. The resonance linewidths are quantified by Im(ω±)=−ζ. Approximating χ± as χ±=−1/2 we find the imaginary part of χ as
which implies that χi is the sum of two same-sign Lorentzians centred at ±κ. The transmission in this regime is then given by
where C, Γ and δ are the free parameters that can be used in curve-fitting to experimentally obtained transmission spectra. Clearly, the transmission in this strong-driving regime presents a symmetric doublet spectra and the observed transparency is because of the contribution of two Lorentzians.
In the intermediate-driving regime51 quantified by κ>κT, β=βr is real (that is, βi=0). This leads to complex eigenfrequencies ω±=(−iγ1−iγ2±2βr)/4 and complex χ±=−1/2±i(γ1−γ2)/4βr. Thus, the supermodes have different resonance frequencies located at ±βr/2 but have the same linewidths quantified by their imaginary parts Im(ω±)=ω±i=(−γ1−γ2)/4. Consequently, we have
where ε=βr/2. The expression in the second bracket of equation (12) is the sum of two Lorentzians, similar to the expression obtained for the strong-driving regime in equation (10), implying the contribution of ATS. The expression in the first bracket corresponds to the interference term and can be controlled by choosing the loss of the coupled modes. For example, choosing two modes satisfying γ1=γ2 will lead to C1=0, and hence the expression TEIT/ATS will become the same as TATS. This implies that to observe ATS, the linewidths (that is, Q) of the coupled WGMs should be very close to each other as will be demonstrated in the experiments discussed below.
Fano resonances and EIT in experiments with coupled WGMRs
EIT is a result of strong Fano interferences and takes place when a high-Q WGM of one microresonator is directly coupled to a low-Q WGM of a second microresonator with zero-detuning in their resonance frequencies. In order to demonstrate this, we chose a low-Q mode in μR1 (QμR1=1.91 × 105) and a high-Q mode in μR2 (QμR2=7.26 × 107). We then set the distance between the resonators such that the coupling strength was smaller than the loss contrast of the resonators. At this point, we continuously tuned the frequency of the high-Q mode in μR2 such that it approached to the frequency of the low-Q mode in μR1. As the frequency-detuning between the modes gradually decreased, the modes became spectrally overlapped. Consequently, we first observed an asymmetric Fano lineshape with the peak located closer to the lower-detuning side (Fig. 3a, upper panels), and then a transparency window appeared at zero-detuning ω2−ω1=0 (Fig. 3a, middle panel). The linewidth of the transparency window was 5 MHz. The asymmetry of Fano resonances decreased as we approached to zero-detuning. As the frequency of the high-Q mode was further increased, detuning started to increase again leading to the emergence of Fano lineshapes whose peaks were also located closer to zero-detuning (Fig. 3a, lower panels). Finally, when the frequency was increased such that there was no overlap between the modes, Fano lineshapes were lost and we observed two independent Lorentzian lineshapes corresponding to the two modes in μR1 and μR2.
Next, we studied the effect of coupling on the transparency window by first setting the frequency detuning of the low- and high-Q modes to zero, and then tuning the distance between the microtoroids (Fig. 3b). Note that the coupling strength here corresponds to the strength of the control field in atomic systems. We observed that as the coupling strength was increased (that is, the distance between the microtoroids decreased) the transmission at the transparency window increased from 0.63 to 0.98 (Fig. 3c). During this process, the linewidth of the transparency window increased from 3 to 43 MHz (Fig. 3c).
Experimental demonstration of ATS in coupled WGMRs
Contrary to EIT, ATS is not a result of Fano interferences but requires a strong-coupling between two WGMs of similar Q. In order to demonstrate this, we chose the mode with QμR1=1.63 × 106 in μR1 and the mode QμR2=1.54 × 106 in μR2. We first tuned the resonance frequencies of the modes to have ω1=ω2 (that is, zero-detuning) when the microtoroids were sufficiently away from each other so that they could not exchange energies (that is, no coupling). At this stage, the transmission showed single resonance with Lorentzian lineshape (Fig. 4a, lowest panel). As we started to bring the resonators closer to each other (that is, increased coupling strength), the single resonance split into two resonances whose spectral distance (that is, mode splitting) increased with increasing coupling strength. For large coupling strengths, the transmission spectra were well-fitted by two Lorentzian resonances.
Next, we chose two detuned resonance lines and set the coupling to strong-coupling regime (that is, resonators are very close to each other). We observed that the split modes in the transmission were not symmetric (Fig. 4b, upper panel), and they had different transmission dips. This can be attributed to the unequal distribution of the supermodes in the two resonators. As we tuned the spectral distance between the WGMs by increasing the frequency of the mode in μR2, the split modes started to approach each other (that is, decreasing mode-splitting) and the difference between their transmission dips decreased. At zero-detuning the resonances became symmetric, that is they are Lorentzian with the same linewidths and transmission dips (Fig. 4b, middle panel). Here the supermodes are equally distributed between the resonators. When the frequency of the mode in μR2 was further increased beyond the zero-detuning point, the modes repelled each other leading to an avoided crossing during which they interchanged their linewidths and transmission dips (Fig. 4b, lower panels).
Discerning EIT from ATS using AIC
As we have discussed in the previous sections, in the theoretical model and the experimental observations, EIT and ATS both display a transparency window in the transmission spectrum of coupled microresonators (that is, similar to a three-level quantum system). However, EIT is because of Fano interference and hence requires coupling between a high-Q mode (that is, discrete system) and a low-Q mode (that is, continuum) in the weak-driving regime, while ATS is because of strong-coupling induced splitting of resonance modes and requires the interaction between modes with similar Q in the strong-driving regime. Thus, depending on the relative Q’s of the interacting modes and their coupling strength, the system of coupled microresonators can operate in either the EIT or the ATS regimes. Discerning whether a transparency window in the transmission spectrum of the system of coupled resonators is the signature of EIT or ATS without a priori information on the Qs and coupling strength between the modes is crucial.
Here we performed experiments under various conditions of our coupled-resonator system, obtained transmission spectra and used the AIC proposed to discriminate between EIT and ATS in atomic systems to discern EIT or ATS. The AIC provides a method to select the best model from a set of models based on the Kullback–Leibler (K–L) distance between the model and the truth. The K–L distance quantifies the amount of information lost when approximating the truth. Thus, a good model is the one that minimizes the information loss and hence the K–L distance. Then AIC quantifies the amount of information lost when the model λi with ki unknown parameters out of N models is used to fit the data x=x1, x2, ..., xn obtained in the measurements, and is given as Ii=−2logLi+2ki, where Li is the maximum likelihood for the candidate model λi and 2ki accounts for the penalty for the number of parameters used in the fitting. Then, the relative likelihood of the model λi is given by the Akaike weight . In the case of least-squares and the presence of technical noise in the experiments, a fitness test using per-point (mean) AIC weight , where Īi=Ii/n, can be applied. In our study involving only two models (N=2), we can rewrite wi and as
with wEIT+wATS=1 and .
In our experiments, we acquired 10,000 data points (n=10,000) to form a transmission spectrum at each setting of coupling strength and frequency-detuning, and we repeated the measurements to obtain 10 transmission spectra at each setting, to take into account the fluctuations and uncertainty in the measurements. We used TEIT and TATS given in equation (8) and equation (10), respectively, to fit the transmission spectra obtained in the experiments. Then we used the AIC tests proposed by Anisimov et al.17 by calculating (wEIT, wATS) and to determine which of the models (EIT or ATS) is the most likely for the experimental observation.
In Fig. 5, we present typical curves of (wEIT, wATS) and obtained at three different experimental settings, corresponding to three different regimes of operation, as the coupling strength was increased: EIT-dominated (Fig. 5a), ATS-dominated (Fig. 5b) and EIT-to-ATS transition regime (Fig. 5c). The models assigned using AIC to the experimental data agree very well with the requirements to observe EIT or ATS.
In the first case (Fig. 5a), the WGMs in the resonators were chosen such that their decay rates, quantified by QμR1 (that is, γ1) and QμR2 (that is, γ2), significantly differed from each other (that is, QμR2/QμR1~400). We calculated κT=|γ1−γ2|/4=312.8 MHz, which was larger than the coupling strengths used in the experiments (κ<100 MHz). Starting from (that is, both the EIT and the ATS models are equally likely) for very weak coupling strength (0≤κ≤15 MHz≪κT), the likelihood of EIT model increased as the coupling strength was increased up to 100 MHz. Thus, we conclude that in this setting, which corresponded to weak-driving regime (κ<κT), data obtained in the experiments favour the EIT model, as revealed by .
In the second case (Fig. 5b), the decay rates of the coupled WGMs were very similar to each other (that is, QμR2/QμR1 ~0.95), and we estimated the critical coupling strength as κT=16.2 MHz, which was smaller than the coupling strengths considered κ>60 MHz. Therefore, as demonstrated in the model, this falls in the strong-driving regime (κ>>κT), where ATS is expected. Indeed, in this experimental setting, starting from , the likelihood of the ATS model increased as the coupling strength was increased up to 400 MHz. Thus, the data obtained in the experiments favours the ATS model as revealed by .
The third case (Fig. 5c) revealed an interesting phenomenon: transition from an EIT-dominated regime to an ATS-dominated regime through an inconclusive regime, where both EIT and ATS are equally likely. The decay rates of the chosen WGMs were similar (that is, QμR2/QμR1 ~2.6); larger than that of the setting of Fig. 5b but much smaller than that of the setting in Fig. 5a. We estimated the critical coupling strength as κT=29.5 MHz. In this case, the EIT model first dominated when the coupling strength was small. Then the likelihood of the EIT model decreased and that of the ATS model increased as the coupling strength was increased up to 50 MHz, where we observed . Further increase in the coupling strength beyond this point revealed a transition to an ATS-dominated regime . This results agree well with the predictions of the model: in the EIT-dominated regime we had κ<κT, in the transition regime we had κ~κT and finally in the ATS-dominated regime we had κ>>κT. In Fig. 5d–f, we also present (wEIT, wATS) as a function of the coupling strength. As expected, these weights exhibit a binary behaviour with an abrupt change from the EIT-dominated regime to the ATS-dominated regime.
Since we collected 10 sets of data at each specific condition, we could assign s.d.’s to the AIC weights as seen in Fig. 5. The technical noise in the experimental data points plays an accumulated role in the model fitting, which blurs the distinction between the models. This is clearly seen in the comparison of the AIC weights obtained from the experimental data with the theoretical weights. When the coupling strength was very small, in particular for the EIT regime, the noise had a larger blurring effect. This is attributed to the fact that in the very weak coupling regime, the EIT transparency window is so small that it is buried in the noise; thus, the contribution of the transparency band to the whole fitting decreases. The factors that affect the fitting and hence the model-assignment according to AIC weights are thermal noise, the probe laser frequency and amplitude fluctuations, the limited number of data points acquired for each spectrum, the resolution of the measurement equipments and the efficiency of the detector. We estimated that the s.d. of the total noise in our experiments is 1–2.5% of the measured signal.
Finally in Fig. 6 we show examples of typical transmission spectra obtained in our experiments in the EIT-dominated (Figs 5a and 6a), the ATS-dominated (Figs 5b and 6b) and the EIT-to-ATS transition regimes (Figs 5c and 6c), together with the best-fitting curves using the expressions TEIT and TATS derived from the theoretical model. It is clear that for the spectrum for which the AIC assigned the EIT model, the function TEIT provided a better fit than TATS. In particular, the TATS fitting performed poorly around the narrow transparency window (Fig. 6a inset). In the spectrum for which the ATS model was assigned according to AIC weights, TATS performed extremely well, whereas the TEIT fitting was very poor (Fig. 6b). The experimental conditions for the data shown in Fig. 5c revealed a transition from EIT to ATS. We chose a spectrum obtained in the vicinity of the transition point and performed curve-fitting using TEIT and TATS. It is clearly seen in Fig. 6c that TEIT and TATS functions perform equally well and one cannot conclusively assign a model to it: we cannot conclusively show EIT (or ATS) nor rule EIT (or ATS) out. These curve-fitting tests (Fig. 6) agree well with the predictions of the AIC weights (Fig. 5).
As we showed in the previous sections and in the Supplementary Note 1 and Supplementary Fig. 1, EIT/ATS model (intermediate-driving regime) has two terms, one of which is exactly the same as the ATS model (strong-driving regime) and the other is an interference term. We found theoretically and experimentally that and exhibit the same values because the contribution of the interference term is set to zero or to much lower values than the contribution from the ATS part during the curve-fitting because C1 of equation (12) is a free-parameter (Supplementary Note 2 and Supplementary Figs 4–6). Moreover, curve-fitting using the intermediate-driving regime model to the experimentally obtained transmission spectra revealed that for the transmission spectra for EIT case, the EIT/ATS model do not provide a good fit, although it has more free parameters. The discrepancy is significant around the zero-detuning where the transparency window exists. For the spectra obtained for the ATS and EIT-to-ATS transition, we see that the EIT/ATS model provides a curve-fitting at least as good as the ATS model (Supplementary Note 2 and Supplementary Fig. 7).
Although initially proposed, observed and used in atomic and molecular systems, Fano interference, EIT and ATS are among many quantum phenomena that have classical and, more importantly, all-optical analogues. Their demonstrations in on-chip physical systems using optical microresonators, metamaterials or plasmonics offer great promises for a wide range of applications including controlling the flow of light on-chip, high-performance sensors and studying the effects of many parameters that are difficult to test in atomic and molecular systems that need sophisticated and hard-to-access experimental environment and techniques. In particular, the capability of creating EIT and controlling the features of the transparency window in on-chip coupled optical microcavities is important for on-chip all-optical slowing and stopping of light, tunable optical filters, switching and nonlinear optics.
Our approach, demonstrated in this work, provides a highly accessible and controllable platform that allows to test the effects of all relevant parameters (coupling strength, decay rates and frequency detunings) on the same coupled-resonator system for the observation and control of Fano resonances, EIT and ATS, as well as to probe the transitions among them. The capability to fine-tune the parameters at a high level, as demonstrated here, enabled us to show the avoided crossing in the ATS process as the frequency of one of the resonances were steered.
In order to make good use of the observed transparency windows in coupled microresonators for the practical applications mentioned above, it is crucial that we know whether Fano interferences have played a role or not (that is, is the transparency the result of EIT or ATS?). Here we applied an objective test to characterize the parameters involved in Fano, EIT or ATS processes in coupled optical resonators and clearly discerned between EIT and ATS. The test used here is the AIC proposed by Anisimov et al.17 This test clearly and with high confidence revealed whether the EIT or the ATS was involved in the experimentally obtained transmission spectra under different operating conditions. In addition to its capability to discriminate between EIT and ATS, the test revealed the sensitivity of the parameters involved. Our study demonstrates the suitability of the AIC method to characterize EIT and ATS in coupled microresonator systems and to study the effects of the system parameters on the observed spectra in the transition regime.
How to cite this article: Peng, B. et al. What is and what is not electromagnetically induced transparency in whispering-gallery microcavities. Nat. Commun. 5:5082 doi: 10.1038/ncomms6082 (2014).
Kelly, W. R. et al. Direct observation of coherent population trapping in a superconducting artificial atom. Phys. Rev. Lett. 104, 163601 (2010).
Fleischhauer, M., Imamoglu, A. & Marangos, J. P. Electromagnetically induced transparency: optics in coherent media. Rev. Mod. Phys. 77, 633–673 (2005).
Marangos, J. P. Electromagnetically induced transparency. J. Mod. Opt. 45, 471 (1998).
Boller, K. J., Imamoglu, A. & Harris, S. E. Observation of electromagnetically induced transparency. Phys. Rev. Lett. 66, 2593 (1991).
Fano, U. Effects of configuration interaction on intensities and phase shifts. Phys. Rev. 124, 1866 (1961).
Miroshnichenko, A. E., Flach, S. & Kivshar, Y. S. Fano resonances in nanoscale structures. Rev. Mod. Phys. 82, 2257–2298 (2010).
Hau, L. V., Harris, S. E., Dutton, Z. & Behroozi, C. H. Light speed reduction to 17 metres per second in an ultracold atomic gas. Nature 397, 594 (1999).
Phillips, D. F., Fleischhauer, A., Mair, A., Walsworth, R. L. & Lukin, M. D. Storage of light in atomic vapor. Phys. Rev. Lett. 86, 783 (2001).
Liu, C., Dutton, Z., Behroozi, C. H. & Hau, L. V. Observation of coherent optical information storage in an atomic medium using halted light pulses. Nature 409, 490–493 (2001).
Autler, S. H. & Townes, C. H. Stark effect in rapidly varying fields. Phys. Rev. 100, 703 (1955).
Piotrowicz, M. J. et al. Measurement of the electric dipole moments for transitions to Rubidium Rydberg states via Autler–Townes splitting. New J. Phys. 13, 093012 (2011).
Ahmed, H. et al. Quantum control of the spin-orbit interaction using the Autler-Townes effect. Phys. Rev. Lett. 107, 163601 (2011).
Lukin, M. D. et al. Spectroscopy in dense coherent media: line narrowing and interference effects. Phys. Rev. Lett. 79, 2959 (1997).
Mücke, M. et al. Electromagnetically induced transparency with single atoms in a cavity. Nature 465, 755–758 (2010).
Longdell, J. J., Fraval, E., Sellars, M. J. & Manson, N. B. Stopped light with storage times greater than one second using electromagnetically induced transparency in a solid. Phys. Rev. Lett. 95, 063601 (2005).
Abdumalikov, A. A. et al. Electromagnetically induced transparency on a single artificial atom. Phys. Rev. Lett. 104, 193601 (2010).
Anisimov, P. M., Dowling, J. P. & Sanders, B. C. Objectively discerning Autler-Townes splitting from electromagnetically induced transparency. Phys. Rev. Lett. 107, 163604 (2011).
Zhang, S., Genov, D. A., Wang, Y., Liu, M. & Zhang, X. Plasmon-induced transparency in metamaterials. Phys. Rev. Lett. 101, 047401 (2008).
Papasimakis, N., Fedotov, V. A., Zheludev, N. I. & Prosvirnin, S. L. Metamaterial analog of electromagnetically induced transparency. Phys. Rev. Lett. 101, 253903 (2008).
Weis, S. et al. Optomechanically induced transparency. Science 330, 1520–1523 (2010).
Dong, C., Fiore, V., Kuzyk, M. C. & Wang, H. Optomechanical dark mode. Science 21, 1609–1613 (2012).
Alzar, C. G., Martinez, M. A. G. & Nussenzveig, P. Classical analog of electromagnetically induced transparency. Am. J. Phys. 70, 37–41 (2002).
Xiaodong, Y., Yu, M., Kwong, D.-L. & Wong, C. H. All-optical analog to electromagnetically induced transparency in multiple coupled photonic crystal cavities. Phys. Rev. Lett. 102, 173902 (2009).
Smith, D. D., Chang, H., Fuller, K. A., Rosenberger, A. T. & Boyd, R. W. Coupled-resonator-induced transparency. Phys. Rev. A 69, 063804 (2004).
Naweed, A., Farca, G., Shopova, S. I. & Rosenberger, A. T. Induced transparency and absorption in coupled whispering-gallery microresonators. Phys. Rev. A 71, 043804 (2005).
Xu, Q. et al. Experimental realization of an on-chip all-optical analogue to electromagnetically induced transparency. Phys. Rev. Lett. 96, 123901 (2006).
Totsuka, K., Kobayashi, N. & Tomita, M. Slow light in coupled-resonator-induced transparency. Phys. Rev. Lett. 98, 213904 (2007).
Dong, C. H. et al. Modified transmission spectrum induced by two-mode interference in a single silica microsphere. J. Phys. B 42, 215401 (2009).
Xiao, Y. F., He, L., Zhu, J. & Yang, L. Electromagnetically induced transparency-like effect in a single polydimethylsiloxane-coated silica microtoroid. Appl. Phys. Lett. 94, 231115 (2009).
Tomita, M., Totsuka, K., Hanamura, R. & Matsumoto, T. Tunable Fano interference effect in coupled-microsphere resonator-induced transparency. J. Opt. Soc. Am. B 26, 813–818 (2009).
Li, B. B. et al. Experimental controlling of Fano resonance in indirectly coupled whispering-gallery microresonators. Appl. Phys. Lett. 100, 021108 (2012).
Maleki, L., Matsko, A. B., Savchenkov, A. A. & Ilchenko, V. S. Tunable delay line with interacting whispering-gallery-mode resonators. Opt. Lett. 29, 626–628 (2004).
Matsko, A. B., Savchenkov, A. A., Strekalov, D., Ilchenko, V. S. & Maleki, L. Interference effects in lossy resonator chains. J. Mod. Opt. 51, 2515–2522 (2004).
Grudinin, I. S., Lee, H., Painter, O. & Vahala, K. J. Phonon laser action in a tunable two-level system. Phys. Rev. Lett. 104, 083901 (2010).
Peng, B., Ozdemir, S. K., Zhu, J. & Yang, L. Photonic molecules formed by coupled hybrid resonators. Opt. Lett. 37, 3435–3437 (2012).
Preu, S. et al. Coupled whispering gallery mode resonators in the Terahertz frequency range. Opt. Express 16, 7336–7343 (2008).
Zhu, J. et al. On-chip single nanoparticle detection and sizing by mode splitting in an ultrahigh-Q microresonator. Nat. Photon 4, 46–49 (2010).
He, L., Ozdemir, S. K., Zhu, J., Kim, W. & Yang, L. Detecting single viruses and nanoparticles using whispering gallery microlasers. Nat. Nanotechnol. 6, 428–432 (2011).
Kim, W., Ozdemir, S. K., Zhu, J., He, L. & Yang, L. Demonstration of mode splitting in an optical microcavity in aqueous environment. Appl. Phys. 97, 071111 (2010).
Ozdemir, S. K., Zhu, J., He, L. & Yang, L. Estimation of Purcell factor from mode-splitting spectra in an optical microcavity. Phys. Rev. A. 83, 033817 (2011).
Zheng, C. et al. Controllable optical analog to electromagnetically induced transparency in coupled high-Q microtoroid cavities. Opt. Express 20, 16 (2012).
Zhang, J., Xiao, S., Jeppesen, C., Kristensen, A. & Mortensen, N. A. Electromagnetically induced transparency in metamaterials at near-infrared frequency. Opt. Express 18, 17187–17192 (2010).
Abi-Salloum, T. Y. Electromagnetically induced transparency and Autler-Townes splitting: two similar but distinct phenomena in two categories of three-level atomic systems. Phys. Rev. A 81, 053836 (2010).
Abi-Salloum, T. Y., Davis, J. P., Lehman, C., Elliott, E. & Narducci, F. A. Phase dynamics and interference in EIT. J. Mod. Opt. 54, 2459–2471 (2007).
Sun, H., Liu, Y. X., You, J. Q., Il’ichev, E. & Nori, F. Electromagnetically induced transparency and Autler-Townes splitting in superconducting flux quantum circuits. Phys. Rev. A 89, 063822 (2014).
Anisimov, P. & Kocharovskaya, O. Decaying-dressed-state analysis of a coherently driven three-level Λ system. J. Mod. Opt. 55, 3159–3171 (2008).
Ian, H., Liu, Y. X. & Nori, F. Tunable electromagnetically induced transparency and absorption with dressed superconducting qubits. Phys. Rev. A 81, 063823 (2010).
Burnham, K. P. & Anderson, D. R. Model Selection and Multimodel Inference 2nd edn Springer-Verlag (2002).
Giner, L. et al. Experimental investigation of the transition between Autler-Townes splitting and electromagnetically-induced-transparency models. Phys. Rev. A 87, 013823 (2013).
Oishi, T., Suzuki, R., Talukder, A. I. & Tomita, M. Transition from an optical precursor in coupled-resonator-induced transparency to coherent energy exchange in Autler-Townes splitting. Phys. Rev. A 88, 023847 (2013).
Tan, C. & Huang, G. Crossover from electromagnetically induced transparency to Autler–Townes splitting in open ladder systems with Doppler broadening. J. Opt. Soc. Am. B 31, 704–715 (2014).
This work is supported by the NSF under grant number 0954941 and the US Army Research Office under grant number W911NF-12-1-0026. F.N. is supported by the RIKEN iTHES Project, MURI Center for Dynamic Magneto-Optics and a Grant-in-Aid for Scientific Research (S).
The authors declare no competing financial interests.
About this article
Cite this article
Peng, B., Özdemir, Ş., Chen, W. et al. What is and what is not electromagnetically induced transparency in whispering-gallery microcavities. Nat Commun 5, 5082 (2014). https://doi.org/10.1038/ncomms6082
Nature Communications (2022)
Nature Photonics (2021)
Dual-frequency unidirectional reflectionlessness in a non-Hermitian quantum system of two different energy-level quantum dots coupled to a plasmonic waveguide
Applied Physics B (2021)
Optical and Quantum Electronics (2021)
Design of a bi-functional metamaterial with broadband electromagnetically induced transparency and transmission-type polarization conversion
Applied Physics B (2021)