Recent X-ray crystal structures of the two-pore domain (K2P) family of potassium channels have revealed a unique structural architecture at the point where the cytoplasmic bundle-crossing gate is found in most other tetrameric K+ channels. However, despite the apparently open nature of the inner pore in the TWIK-1 (K2P1/KCNK1) crystal structure, the reasons underlying its low levels of functional activity remain unclear. In this study, we use a combination of molecular dynamics simulations and functional validation to demonstrate that TWIK-1 possesses a hydrophobic barrier deep within the inner pore, and that stochastic dewetting of this hydrophobic constriction acts as a major barrier to ion conduction. These results not only provide an important insight into the mechanisms which control TWIK-1 channel activity, but also have important implications for our understanding of how ion permeation may be controlled in similar ion channels and pores.
K2P potassium channels represent a structurally unique family of channels involved in physiological functions as diverse as cell-volume regulation, central chemosensitivity, apoptosis, vasodilatation, neuronal excitability and the perception of pain1. They also act as a major target of volatile anaesthetics and represent attractive therapeutic targets for the treatment of a variety of cardiovascular and neurological disorders2,3. In particular, the first mammalian member of this superfamily to be cloned, TWIK-1 (K2P1/KCNK1), has been implicated in having an important physiological role in the brain and the heart4,5,6. However, understanding the biophysical, pharmacological and functional properties of this particular channel has been difficult. This is mainly because of the extremely low levels of functional activity observed when TWIK-1 is expressed in heterologous systems, especially when compared with other members of the K2P family7. The precise reasons for this remain controversial and may involve a combination of either post-translational modification (sumoylation)8,9 and/or rapid endocytosis10,11,12,13. However, it is clear that even when TWIK-1 channels are present in the plasma membrane they have very low levels of intrinsic functional activity and are effectively silent10,11,12,14.
Two recent crystal structures of K2P channels (TWIK-1 and TRAAK) revealed that these channels assemble as a dimer with many similarities to classical K+ channels including a ‘pseudotetrameric’ K+ selective pore15,16. However, functional studies have indicated that K2P channels, unlike most other K+ channels, do not utilize an intersection of the pore-lining helices or cytoplasmic ‘bundle-crossing’ as their primary gate. Instead, K2P channel gating is primarily the result of a gate located close to, or within, the selectivity filter17,18,19. It was therefore interesting to observe in the crystal structures of both TWIK-1 and TRAAK that the dimensions of the cytoplasmic entrance to the pore were comparable to other K+ channel structures believed to represent functionally open conformations20,21. However, despite the apparently ‘open’ conformation of the TWIK-1 structure, the arrangement of the transmembrane helices at the cytoplasmic entrance to the pore remains unusual; the distal end of M4 is kinked parallel to the membrane forming an amphipathic ‘C-helix’ that has been proposed to have a role in channel gating16. In addition, the C-helix also contains Lys274, the residue proposed to be the site responsible for channel ‘silencing’ by post-translational sumoylation8,9.
In this study we sought to investigate whether the structural features of TWIK-1 may provide an insight into the apparent lack of functional activity when this channel is expressed. We therefore employed multi-scale molecular dynamics (MD) tools to simulate the behaviour of the TWIK-1 crystal structure within a lipid membrane environment. Intriguingly, we found evidence for a hydrophobic gate deep within the inner cavity of the TWIK-1 pore, and we demonstrate that this hydrophobic barrier plays a key role in determining the functional activity of TWIK-1.
MD simulation of TWIK-1 within a lipid bilayer
To simulate the behaviour of TWIK-1 within a lipid membrane environment we first used coarse-grain MD simulations (CGMD) to embed and equilibrate the experimentally determined channel structure in a phospholipid (POPC (1-palmitoyl,2-oleoyl-sn-glycero-3-phosphocholine)) bilayer. In the CGMD simulations and at the start of the subsequent atomistic simulations, the C-helix aligned parallel to the membrane and the side-fenestration between M2 and M4 was still visible (Fig. 1). At the end of the 100-ns atomistic simulation, movement of the transmembrane helices at the lipid interface resulted in a closure of the fenestration and a small upward movement of the distal end of M2. Nevertheless, the overall structure remained stable; in particular, the C-helix remained parallel to the plane of the membrane and the cytoplasmic gate and inner pore remained apparently open (Fig. 1; Supplementary Fig. 1).
Water dynamics within the inner pore
Closer examination of the simulation revealed an unusual behaviour of water molecules within the pore of the channel; a stochastic wetting and dewetting process was observed within the inner pore (Fig. 2; Supplementary Movie 1). Visualization of the averaged water density within the inner pore revealed that the water loss was most drastic around 5–10 Å below the selectivity filter (Fig. 2a). The number of water molecules within this region dropped to zero within a few nanoseconds of starting the simulation, followed by fluctuations throughout the simulation (Fig. 2a,b). An averaged distribution plot shows a clear absence of water within this region compared with the cytoplasmic entrance of the pore (Fig. 2c). Similar water dynamics were also observed in another separate 100-ns simulation and a fractional occupancy histogram shows that water was completely absent from this region of the inner pore for >50% of the duration of the simulations (Fig. 2d).
Hydrophobic cuff deep within the TWIK-1 pore
To understand this dewetting process we examined the structure of the TWIK-1 pore. A section through the inner pore shows that the region where dewetting is most prominent is extremely hydrophobic (Fig. 3a). In particular, Leu146 and Leu261 from both subunits form a hydrophobic cuff around this region with their side chains pointing into the pore throughout the simulation (Fig. 3b). Another hydrophobic side chain (Leu264) also appears to contribute to this cuff, but this residue is located at the interface between M2 and M4, and so the side chain is not fully exposed to the conduction pathway. Interestingly, the hydrophobic nature of this inner cavity is in marked contrast to the cytoplasmic mouth of the pore which is lined by numerous polar side chains and which remains hydrated throughout the simulations (Fig. 3a).
Simulations of inner pore hydration
Confinement of water and ions at the molecular scale can strongly influence their behaviour and lead to effects not anticipated from macroscopic descriptions22,23,24,25,26. The dewetting process we observed within the hydrophobic cuff therefore led us to consider the influence of a possible ‘hydrophobic gating’ process within the TWIK-1 pore, and to ask whether this hydrophobic barrier might contribute to the very low basal levels of ionic currents which these channels appear to conduct. The principle of hydrophobic gating was first demonstrated in MD simulations of model nanopores with hydrophobic constrictions of radius<6 Å where water begins to evaporate and fluctuate between its liquid and vapour states. These fluctuations lead to an effective energy barrier for ion permeation even without physical occlusion of the pore and therefore can function as a ‘vapour-lock’ gate23,24,25,26,27. This type of gating has now been shown to occur in several classes of ion channel including pentameric ligand-gated channels, the prokaryotic mechanosensitive MscS channel and voltage-gated K+ channels28,29,30,31.
Intriguingly, a previous study showed that the L146D mutation in M2 of TWIK-1 resulted in large currents when expressed in Xenopus oocytes11. This result is consistent with Leu146 contributing to a hydrophobic barrier within the pore and with disruption of this barrier by the L146D mutation. We therefore examined the water dynamics of a TWIK-1 channel with the L146D mutation during a 100-ns simulation. This mutation markedly altered the behaviour of water within the inner pore, which remained hydrated throughout the simulation (Fig. 4a; Supplementary Fig. 2). However, the L146D mutation introduces a negative charge into the pore. We therefore changed Leu146 to another hydrophilic, but non-charged side chain of similar size (L146N), and repeated the MD simulation. Analysis of water occupancy and density revealed that the L146N mutant also retained water within the inner pore, indicating that this effect is not just the result of introducing a negative charge into the pore (Fig. 4b; Supplementary Fig. 2).
As a further control, we also performed MD simulations of the wild-type (WT) and L146N-mutant TWIK-1 channels using a variety of different force fields. Importantly, dewetting was observed in the WT channel irrespective of the force field used, whereas the L146N-mutant simulations all remained fully hydrated (Supplementary Fig. 3). Furthermore, to determine whether this dewetting process was a result of subtle changes in pore structure during the simulations, we performed additional simulations in which the Cα backbone atoms of the protein were subjected to a soft positional restraint, thus keeping the channel conformation close to that in the crystal structure. For the WT structure, a similar dewetting process was also observed within the first few nanoseconds, followed by intermittent fluctuations of water within the inner cavity, whereas the L146N-mutant pore remained hydrated throughout (Fig. 5a–d). This demonstrates that dewetting of the WT channel is not a consequence of any of the minor structural changes which occur during the simulation. Furthermore, similar to the result seen during simulation of the NavMs sodium channel32, even though the fenestrations remained open during this restrained simulation of TWIK-1, the alkyl chains of the surrounding lipid bilayer were not long enough to occlude the inner cavity.
Energetics of the hydrophobic barrier
We next reasoned that retention of water within the inner pore by the L146N mutation should also reduce the energetic barrier to the movement of a K+ ion through the inner cavity. We therefore performed potential mean force (PMF) calculations, which provide an estimate of the free energy profile for the transit of a K+ ion through the inner pore in equilibrated MD structures for WT and L146N-mutant structures (Fig. 5e). These results show that for the WT TWIK-1 structure there is a steadily increasing barrier to permeation as the ion approaches the hydrophobic cuff from the cytoplasmic entrance (Fig. 5f). This barrier continues towards the selectivity filter due to the associated dewetting of the region above the hydrophobic cuff. However, for the L146N mutation there is an overall reduction in this barrier (by about 4 kT), especially within the deep inner pore in the vicinity of this mutation. This demonstrates that the L146N mutation can directly influence the conduction pathway for K+ ions.
L146N mutation increases channel activity
The result of these simulations therefore led us to test the effects of the hydrophilic L146N mutation on the functional activity of TWIK-1. To achieve this we used a variant of TWIK-1, which contains a trafficking mutation (I293A/I294A) within the cytoplasmic domain. This trafficking mutation (hereafter referred to as TWIK-1*) has been shown to prevent the endocytic retrieval of TWIK-1, thereby promoting stable expression of TWIK-1 channels within the plasma membrane11,12. As shown previously, we found that WT TWIK-1 produces no detectable channel activity when expressed in Xenopus oocytes and that the activity of the TWIK-1* mutant is barely detectable above background (Supplementary Fig. 4). This supports previous studies which show that even when TWIK-1 channels can reach the membrane they generally exhibit very low levels of channel activity10,11,12.
However, when the L146N mutation was introduced into TWIK-1*, we observed high levels of whole-cell current, similar to reported effects of the L146D mutation (Fig. 4c). This demonstrates that introduction of an uncharged hydrophilic side chain into the hydrophobic inner pore of TWIK channel not only leads to an increase in hydration of the inner cavity in silico but also to enhanced whole-cell currents. This result is also consistent with the effects of introducing similar polar side chains into the hydrophobic gate of the MscS channels29.
Direct effects on the ion conduction pathway
Previous studies have shown that mutation of Leu146 and other residues within M2 do not affect the protein expression levels of TWIK-1* in Xenopus oocytes11. However, to confirm that the enhancement of whole-cell currents seen with the L146N-mutant channel is primarily due to a direct effect on the structure of the inner pore, we recorded currents in giant excised patches. We have previously used this approach to demonstrate that some K2P channels are sensitive to intracellular block by large quaternary ammonium ions (for example, tetrahexylammonium (THexA)), which bind deep within the inner cavity just below the selectivity filter. This property can then be used as a direct measurement of the structure of the inner cavity which forms part of the conduction pathway18,19.
We therefore first measured WT TWIK-1* currents in giant excised patches and found the channels to be essentially silent in symmetrical K+ solutions (Fig. 6a). However, TWIK-1 currents have been shown to be enhanced in the presence of Rb+ ions14 and so we measured TWIK-1* currents using Rb+ as a permeant ion. Under these conditions we were able to record outward currents through WT TWIK-1* channels at depolarized potentials (Fig. 6a,b). These currents were sensitive to block by quinine, a known TWIK-1 inhibitor7,9, but were insensitive to block by 50-μM THexA (Fig. 6c, Supplementary Fig. 5).
We next measured currents for the L146N-mutant channel and unlike WT TWIK-1*, outward currents could be measured using K+. These currents were also enhanced by Rb+ (Fig. 6a). However, in marked contrast to WT TWIK-1*, the L146N channels were blocked >90% by 50-μM THexA and >70% by 1-μM THexA (Fig. 6c). Interestingly, we also observed that the Rb+ currents through the WT TWIK-1* channel activated at higher voltages compared with the L146N-mutant (Fig. 6b). This result is consistent with the greater electrical driving force required to overcome the energetic barrier created by a hydrophobic versus hydrophilic nanopore33. Overall, these results therefore strongly support the idea that the L146N mutation directly influences the conduction pathway deep within the inner cavity.
Polar substitutions at Leu146 increase channel activity
To further support this hypothesis we introduced a series of different hydrophilic and hydrophobic residues at Leu146 and examined their effect upon the functional properties of TWIK-1*. Only very small whole-cell currents could be recorded from WT TWIK-1* channels (Supplementary Fig. 4a). However, we found that when polar substitutions were made at Leu146, very large whole-cell currents could be recorded, but that hydrophobic side chains of varying sizes had no effect (Fig. 7). For example, the hydrophobic substitution L146V is similar to WT TWIK-1*, whereas the isosteric, but hydrophilic threonine substitution (L146T) produces large whole-cell currents equal in size to L146D or L146N. Likewise, while the L146A mutation was similar to wild-type TWIK-1*, large currents were observed with the isosteric, but hydrophilic, L146S mutation (Fig. 7). These results strongly support a direct correlation between the ability to hydrate this inner cavity and the functional activity of TWIK-1.
Other polar substitutions within the hydrophobic cuff
To further validate the role of this hydrophobic cuff, we used identical in silico and in vitro mutagenesis strategies to examine the other major side chain which contributes to the cuff, that is, Leu261 located on M4. Similar to the results observed for Leu146, we also found that isosteric polar substitutions at Leu261 (L261D and L261N) led to retention of water within the inner pore during MD simulations (Fig. 8a; Supplementary Fig. 2c,d). Importantly, these mutations also produced large whole-cell currents (Fig. 8b,c). Moreover, similar to the effect observed with Leu146, other small but polar substitutions at Leu261 also markedly increased whole-cell current levels, whereas isosteric non-polar mutations did not, for example, L261A versus L261S (Fig. 8c).
To examine the role of this hydrophobic barrier even further, we next introduced mutations at both Leu146 and Leu261, thereby allowing all four main side chains within the cuff to be changed. We found that the double polar substitutions (for example, L146S/L261S) produced large robust currents. However, a double non-polar alanine substitution (that is, L146A/L261A) did not increase currents, and even introduction of two glycines only led to a small enhancement of current levels (Fig. 8d).
Finally, we examined the effect of substitutions at Leu264, which also contributes to the hydrophobic cuff. The side chains of Leu264 are positioned at the interface between the M2 and M4 helices and so are not fully exposed to the conduction pathway; only one of the two δ-methyl groups of each side chain are exposed to the inner pore (Supplementary Fig. 6a). Nevertheless, we found that MD simulations of L264D mutant channels also led to retention of water within the inner pore (Supplementary Fig. 6b). Furthermore, hydrophilic substitutions at this position markedly increased whole-cell currents when compared with isosteric hydrophobic substitutions, consistent with a partial contribution of Leu264 to the hydrophobic nature of the inner pore.
Utilizing a combination of computational approaches supported by experimental validation, we now provide evidence that the hydrophobic nature of the TWIK-1 pore restricts full hydration of the inner cavity and that this generates an energetic barrier restricting ion permeation through these channels. These results are therefore consistent with the presence of a hydrophobic gate which is now an emerging concept in the field of ion channel biophysics23,25,26,27,28,29,30,31,34.
We validate this hypothesis by demonstrating, both computationally and functionally, that introduction of hydrophilic groups can directly disrupt this barrier. In particular, we demonstrate that the L146N mutation dramatically enhances the block of TWIK-1* currents by intracellular THexA. These quaternary ammonium ions have been shown to bind deep within the K2P channel pore in a region which would directly be affected by this hydrophobic barrier in TWIK-1 (ref. 18). The reduced voltage dependence of the L146N Rb+ currents is also consistent with recent experimental studies of the behaviour of ions and water in hydrophobic nanopores, where dewetting can be overcome in a voltage-dependent manner to induce current flow33,35. Also the relative hydrophobicity of the nanopores increased the voltage required to induce hydration33. This therefore supports our hypothesis that the L146N mutation directly alters the hydrophobicity of the conduction pathway.
The L146N mutation also does not appear to alter regulation of the channel by extracellular pH or to affect inhibition by quinine (Supplementary Fig. 5), and it has been shown that mutation of L146 does not alter the levels of TWIK-1* expression in oocytes11. Therefore, although we cannot exclude additional effects of these mutations on other modalities of TWIK-1 channel gating, we conclude that polar substitutions within this hydrophobic cuff increase TWIK-1 currents by directly disrupting this hydrophobic barrier to water and hydrated ions.
Unlike classical tetrameric K+ channels, the unusual dimeric architecture of the K2P channels places important structural constraints upon the ability of the pore-lining transmembrane helices to form a standard bundle-crossing gate. Evidence already exists that the selectivity filter plays a dynamic role in the control of TWIK-1 channel function5,6,11,14, but the role of additional structures in channel gating were unclear from the initial crystal structure of TWIK-1. Our demonstration that the C-helix remains stable, and that the cytoplasmic mouth of the pore remains open and hydrated in MD simulations, strongly suggests that the cytoplasmic mouth of the pore does not act as a gate as seen in Kv and Kir channels. Instead, our findings suggest that the hydrophobic inner pore of TWIK-1 acts as a strong barrier to ion permeation. In addition to the filter-gating mechanism, this may therefore contribute an additional mechanism to control the flow of ions through this channel.
It has been shown that in some cell types, post-translational sumoylation of Lys274 within the C-helix of TWIK-1 may account for its lack of functional activity8,9. However, when TWIK-1 is expressed in Xenopus oocytes, this effect still remains controversial11,12,13 (Supplementary Fig 4). This does not preclude a role for sumoylation of TWIK-1 in other cell types, but our results clearly demonstrate that the hydrophobic barrier we have identified in this study contributes to the low basal levels of functional activity associated with TWIK-1.
The physiological mechanisms which regulate TWIK-1 currents in vivo are still poorly understood and so it is not yet possible to address how modulation of this hydrophobic barrier might occur. However, by analogy to other K2P channels which also possess a large C-terminal cytoplasmic domain connected to the end of the M4 helix36, it is conceivable that regulatory inputs into this domain could induce subtle movements of the C-helix and pore-lining helices to modulate this hydrophobic barrier. It will also be interesting to examine whether similar hydrophobic barriers may exist in other K2P channels; these leucine residues are not highly conserved in other K2P channels, but there is an isoleucine residue at this position in M2 of THIK-2 and its mutation (I158D) markedly enhances channel activity37. Also, hydrophobic, but not polar, substitutions at the equivalent Leu146 position in M2 of the Drosophila KCNKØ channel cause reduced channel activity38.
Hydrophobic barriers and the concept of hydrophobic gating were first observed during MD simulations of model nanopores23,24,25,26,27. Subsequently, this process has been shown to play a critical role in the gating of several ligand-gated Cys-loop channels31,34, prokaryotic mechanosensitive channels28,29 and even voltage-gated K+ channels30. The biophysical basis of these hydrophobic gates has now been well-characterized; computational studies of Cys-loop channels show that the energy needed to hydrate a hydrophobic gate is greater than the energy needed to solvate an ion at this point, thereby allowing these regions to function as effective barriers to permeation34. Furthermore, in model nanopores hydration of the barrier can also be achieved by introduction of polar groups into the gate27. Similar results have been observed in both Cys-loop and MscS/MscL channels28,29,31,34.
The hydrophobic barrier we observe in TWIK-1 may also share some similarities with the deep pore gating mechanisms found in the SK, BK and MthK Ca2+-activated potassium channels39,40,41,42,43 which also appear to lack a bundle-crossing gate. In summary, we believe that these results not only provide an important insight into the mechanisms which control TWIK-1 K2P channel activity, but also provide further evidence of how the unusual behaviour of water in a confined space is an increasingly important consideration for our understanding of ion channel structure and function.
The TWIK-1 crystal structure (PDB ID: 3UKM, chains A and B) was used as the starting structure for the simulations. Missing atoms and loops (residues 94–99 between E2 and P1 and residue 169–174 between M2 and M3 (Supplementary Fig. 1) were modelled using Modeller9.9 software34,44. The resultant TWIK-1 models were converted to CG (Martini v2.1) representations and CGMD simulations, then run for 500 ns at 323 K to permit the assembly and equilibration of a bilayer containing 298 POPC lipids around the embedded membrane protein45,46. The protein and lipids were next converted to atomistic structures using the CG2AT method described previously47. The initial system was solvated with simple point charge (SPC) water and 150-mM NaCl. K+ ions were placed at positions S2 and S4 in the selectivity filter with an additional ion in the inner pore. Two water molecules were also added to the filter at the S1 and S3 positions. Initial atomistic simulations employed the GROMOS96 43a1 force field with SPC water at 323 K. The atomistic system was equilibrated for 1 ns with the non-hydrogen atoms of the protein restrained with a spring constant of 10 KJ mol−1 Å−2 at constant pressure (1 atm) and temperature, before the 100 ns unrestrained MD simulation with a timestep of 2 fs. Both the 1-ns positional restraint and 100-ns MD simulations were repeated by randomizing initial velocity to obtain two 100-ns simulation. In silico mutations were made using pyMOL mutagenesis scripts on the initial atomistic TWIK-1 system. The mutant systems were then energy minimized before the 1-ns positional restraint and 100-ns MD simulations.
To test the sensitivity of our MD findings, we repeated the atomistic simulations using two additional force fields, GROMOS 53A6 with SPC water, and optimized potentials for liquid simulations (OPLS) all-atom protein particles with united atom POPC lipids and TIP4P water. These simulations, along with our initial systems were also simulated at 310 K to also test temperature sensitivity. To determine whether dewetting precedes any alteration in inner pore structure, the Cα atoms were restrained with spring constant of 10 KJ mol−1 Å−2 and run for another 20 ns.
Snapshots of MD simulations were sampled at every 0.1 ns and visualized using VMD, Chimera or Pymol. HOLE radius profiles were generated using MD analysis and HOLE48,49. Water occupancy at the hydrophobic constriction was analyzed by counting the number of water oxygen atoms at a region −5 Å<z<−10 Å below the S4 ion binding site (Thr117 and Thr225, which define the 0 Å position on the z-axis, see Fig. 1). Water occupancy data from two 100-ns simulations were then combined to calculate the mean (μ) nH2O values and to generate fractional occupancy histograms. Average water density maps were generated by using the Volmap plugin tool with three-dimensional grids every 0.5 Å for each simulation. The maps were then normalized to bulk water density and visualized at an isovalue of 0.5. Water occupancy of mutant channels were compared with WT by obtaining the difference in mean occupancy values Δμ (Mutant–WT).
Potential mean force calculations
Starting structures for one-dimensional potential mean force calculations were obtained from snapshots at 50 ns of unstrained equilibrium simulations in OPLS all-atom force fields. We picked starting structures which had similar radius profile between WT and L146N-mutant channel, but contained nH2O=0 for WT and nH2O=12 for L146N mutant (Fig. 5b). Twenty-five umbrella-sampling windows were produced by placing a K+ ion every 1 Å in the z direction from bulk water into the inner pore24. This K+ ion was harmonically restrained by a force constant of 10 KJ mol−1 Å−2 in the z plane and the system was simulated for 1.25 ns. The z position of this K+ ion, relative to centre-of-mass of the inner pore was sampled every 20 fs. WHAM v2.2 was used to calculate the probability mass function50.
Molecular biology and electrophysiology
Wild-type and mutant TWIK-1 channel currents were studied by expression in Xenopus oocytes. The human TWIK-1 subunit was first cloned into the pBF oocyte expression vector, which adds the 5′ and 3′ untranslated regions of the Xenopus β-globin gene, and mutations were introduced by site-directed mutagenesis. The TWIK-1* channel has mutation of a dileucine trafficking motif (I293A/I294A), which permits stable expression in the plasma membrane, and was used as the background ‘wild-type’ template for all mutations12. Messenger RNA was transcribed in vitro and 15 ng of either wild-type or mutant subunits were injected. Oocytes were incubated for 12 h at 17 °C in ND96 buffer at pH 7.4 (96 mM NaCl, 2 mM KCl, 2 mM MgCl2, 1.8 mM CaCl2, 5 mM HEPES), followed by a further 12 h in an adjusted ND96 buffer, where all sodium is replaced with potassium11. Two-electrode voltage clamp recordings were taken 24 h after injection using an OC-725C Oocyte Clamp amplifier (Warner Instruments), Digidata 1440 interface and pClamp10 software. For the recordings, the oocytes are perfused with the standard ND96 buffer at pH 7.4. A step protocol from −120 mV to +40 mV was used to record the currents for 300 ms, from a holding potential of −80 mV. Excised patch recordings were performed using an Axopatch 200B amplifier. The pipette solutions contained 116 mM KCl, 4 mM NaCl, 1.8 mM CaCl2 and 10 mM HEPES, and the bath solution contained 119 mM KCl, 1 mM NaCl, 2 mM EGTA and 10 mM HEPES. Both solutions were adjusted to pH 7.2. Where indicated, KCl was replaced by RbCl in the bath solution. Currents were recorded in an inside-out configuration, using a step protocol from −100 to +100 mV, with a holding potential of −80 mV.
How to cite this article: Aryal, P. et al. A hydrophobic barrier deep within the inner pore of the TWIK-1 K2P potassium channel. Nat. Commun. 5:4377 doi: 10.1038/ncomms5377 (2014).
Enyedi, P. & Czirjak, G. Molecular background of leak K+ currents: two-pore domain potassium channels. Physiol. Rev. 90, 559–605 (2010).
Mathie, A. & Veale, E. L. Therapeutic potential of neuronal two-pore domain potassium-channel modulators. Curr. Opin. Investig. Drugs 8, 555–562 (2007).
Es-Salah-Lamoureux, Z., Steele, D. F. & Fedida, D. Research into the therapeutic roles of two-pore-domain potassium channels. Trends. Pharmacol. Sci. 31, 587–595 (2010).
Zhou, M. et al. TWIK-1 and TREK-1 are potassium channels contributing significantly to astrocyte passive conductance in rat hippocampal slices. J. Neurosci. 29, 8551–8564 (2009).
Ma, L., Zhang, X. & Chen, H. TWIK-1 two-pore domain potassium channels change ion selectivity and conduct inward leak sodium currents in hypokalemia. Sci. Signal. 4, ra37 (2011).
Goldstein, S. A. K2P potassium channels, mysterious and paradoxically exciting. Sci. Signal. 4, pe35 (2011).
Lesage, F. et al. TWIK-1, a ubiquitous human weakly inward rectifying K+ channel with a novel structure. EMBO J. 15, 1004–1011 (1996).
Plant, L. D. et al. One SUMO is sufficient to silence the dimeric potassium channel K2P1. Proc. Natl Acad. Sci. USA 107, 10743–10748 (2010).
Rajan, S. et al. Sumoylation silences the plasma membrane leak K+ channel K2P1. Cell 121, 37–47 (2005).
Wang, W. et al. The contribution of TWIK-1 channels to astrocyte K(+) current is limited by retention in intracellular compartments. Front. Cell. Neurosci. 7, 246 (2013).
Chatelain, F. C. et al. TWIK1, a unique background channel with variable ion selectivity. Proc. Natl Acad. Sci. USA 109, 5499–5504 (2012).
Feliciangeli, S. et al. Potassium channel silencing by constitutive endocytosis and intracellular sequestration. J. Biol. Chem. 285, 4798–4805 (2010).
Feliciangeli, S. et al. Does sumoylation control K2P1/TWIK1 background K+ channels? Cell 130, 563–569 (2007).
Ma, L., Xie, Y. P., Zhou, M. & Chen, H. Silent TWIK-1 potassium channels conduct monovalent cation currents. Biophys. J. 102, L34–L36 (2012).
Brohawn, S. G., del Marmol, J. & MacKinnon, R. Crystal structure of the human K2P TRAAK, a lipid- and mechano-sensitive K+ ion channel. Science 335, 436–441 (2012).
Miller, A. N. & Long, S. B. Crystal structure of the human two-pore domain potassium channel K2P1. Science 335, 432–436 (2012).
Zilberberg, N., Ilan, N. & Goldstein, S. A. KCNKO: opening and closing the 2-P-domain potassium leak channel entails ‘C-type’ gating of the outer pore. Neuron 32, 635–648 (2001).
Piechotta, P. L. et al. The pore structure and gating mechanism of K2P channels. EMBO J. 30, 3607–3619 (2011).
Rapedius, M. et al. State-independent intracellular access of quaternary ammonium blockers to the pore of TREK-1. Channels (Austin) 6, 473–478 (2012).
Braun, A. P. Two-pore domain potassium channels: variation on a structural theme. Channels (Austin) 6, 139–140 (2012).
Poulsen, H. & Nissen, P. Structural biology: the inner workings of a dynamic duo. Science 335, 416–417 (2012).
Raviv, U., Laurat, P. & Klein, J. Fluidity of water confined to subnanometre films. Nature 413, 51–54 (2001).
Hummer, G., Rasaiah, J. C. & Noworyta, J. P. Water conduction through the hydrophobic channel of a carbon nanotube. Nature 414, 188–190 (2001).
Beckstein, O. & Tai, K. Sansom MSP. Not ions alone: barriers to ion permeation in nanopores and channels. J. Am. Chem. Soc. 126, 14694–14695 (2004).
Beckstein, O. & Sansom, M. S. Liquid-vapor oscillations of water in hydrophobic nanopores. Proc. Natl Acad. Sci. USA 100, 7063–7068 (2003).
Sansom, M. S. et al. Water in ion channels and pores—simulation studies. Novartis. Found. Symp. 245, 66–78 discussion 79–83, 165–168 (2002).
Beckstein, O. et al. Ion channel gating: insights via molecular simulations. FEBS Lett. 555, 85–90 (2003).
Anishkin, A. et al. Hydration properties of mechanosensitive channel pores define the energetics of gating. J. Phys. Condens. Matter. 22, 454120 (2010).
Anishkin, A. & Sukharev, S. Water dynamics and dewetting transitions in the small mechanosensitive channel MscS. Biophys. J. 86, 2883–2895 (2004).
Jensen, M. O. et al. Principles of conduction and hydrophobic gating in K+ channels. Proc. Natl Acad. Sci. USA 107, 5833–5838 (2010).
Zhu, F. & Hummer, G. Drying transition in the hydrophobic gate of the GLIC channel blocks ion conduction. Biophys. J. 103, 219–227 (2012).
Ulmschneider, M. B. et al. Molecular dynamics of ion transport through the open conformation of a bacterial voltage-gated sodium channel. Proc. Natl Acad. Sci. USA 110, 6364–6369 (2013).
Powell, M. R. et al. Electric-field-induced wetting and dewetting in single hydrophobic nanopores. Nat. Nanotechnol. 6, 798–802 (2011).
Zhu, F. & Hummer, G. Pore opening and closing of a pentameric ligand-gated ion channel. Proc. Natl Acad. Sci. USA 107, 19814–19819 (2010).
Jiang, X., Huang, J., Sumpter, B. G. & Qiao, R. Electro-Induced dewetting and concomitant ionic current avalanche in nanopores. J. Phys. Chem. Lett. 4, 3120–3126 (2013).
Bagriantsev, S. N., Clark, K. A. & Minor, D. L. Jr Metabolic and thermal stimuli control K(2P)2.1 (TREK-1) through modular sensory and gating domains. EMBO J. 31, 3297–3308 (2012).
Chatelain, F. C. et al. Silencing of the tandem pore domain halothane-inhibited K+ channel 2 (THIK2) relies on combined intracellular retention and low intrinsic activity at the plasma membrane. J. Biol. Chem. 288, 35081–35092 (2013).
Ben-Abu, Y., Zhou, Y., Zilberberg, N. & Yifrach, O. Inverse coupling in leak and voltage-activated K+ channel gates underlies distinct roles in electrical signaling. Nat. Struct. Mol. Biol. 16, 71–79 (2009).
Bruening-Wright, A., Lee, W. S., Adelman, J. P. & Maylie, J. Evidence for a deep pore activation gate in small conductance Ca2+-activated K+ channels. J. Gen. Physiol. 130, 601–610 (2007).
Cox, D. H. & Hoshi, T. Where’s the gate? Gating in the deep pore of the BK(Ca) channel. J. Gen. Physiol. 138, 133–136 (2011).
Thomson, A. S. & Rothberg, B. S. Voltage-dependent inactivation gating at the selectivity filter of the MthK K+ channel. J. Gen. Physiol. 136, 569–579 (2010).
Thompson, J. & Begenisich, T. Selectivity filter gating in large-conductance Ca(2+)-activated K+ channels. J. Gen. Physiol. 139, 235–244 (2012).
Shi, N. et al. Crucial points within the pore as determinants of K(+) channel conductance and gating. J. Mol. Biol. 411, 27–35 (2011).
Sali, A. & Blundell, T. L. Comparative protein modelling by satisfaction of spatial restraints. J. Mol. Biol. 234, 779–815 (1993).
Bond, P. J. & Sansom, M. S. Insertion and assembly of membrane proteins via simulation. J. Am. Chem. Soc. 128, 2697–2704 (2006).
Scott, K. A. et al. Coarse-grained MD simulations of membrane protein-bilayer self-assembly. Structure 16, 621–630 (2008).
Stansfeld, P. J. & Sansom, M. S. P. From coarse grained to atomistic: a serial multiscale approach to membrane protein simulations. J. Chem. Theory Comp. 7, 1157–1166 (2011).
Michaud-Agrawal, N., Denning, E. J., Woolf, T. B. & Beckstein, O. MDAnalysis: a toolkit for the analysis of molecular dynamics simulations. J. Comput. Chem doi:10.1002/jcc.21787 (2011).
Smart, O. S. et al. HOLE: a program for the analysis of the pore dimensions of ion channel structural models. J. Mol. Graph. 14, 354–360 (1996).
Kumar, S. et al. The weighted histogram analysis method for free-energy calculations on biomolecules. I. the method. J. Comput. Chem. 13, 1011–1021 (1992).
We would like to thank members of the SBCB for their computational expertise as well as Chris Miller for his helpful discussions and comments on the manuscript. This work was supported by grants from the Wellcome Trust, the BBSRC and Pfizer neusentis. P.A. is a Wellcome Trust OXION Training Fellow and F.A-W. is supported by a King’s Scholarship from the Malaysian Government.
The authors declare no competing financial interests.
Supplementary Figures 1-6 (PDF 798 kb)
Dewetting of the TWIK-1 inner pore. Snapshots of water molecules (cyan) inside the inner pore of TWIK-1 channel taken every 0.1 ns during a 100 ns MD simulation. For orientation, the K+ ion at the bottom of the selectivity filter (S4) is shown as a purple sphere for orientation. Water loss is seen deep within the inner pore, but not at the cytoplasmic mouth of the channel. (MOV 3528 kb)
About this article
A heuristic derived from analysis of the ion channel structural proteome permits the rapid identification of hydrophobic gates
Proceedings of the National Academy of Sciences (2019)
Mutation of a single residue promotes gating of vertebrate and invertebrate two-pore domain potassium channels
Nature Communications (2019)
Chemical Biology & Drug Design (2019)
International Journal of Molecular Sciences (2019)
Structure/Activity Analysis of TASK-3 Channel Antagonists Based on a 5,6,7,8 tetrahydropyrido[4,3-d]pyrimidine
International Journal of Molecular Sciences (2019)