Methane in the environment is produced by both biotic and abiotic processes. Biomethanation involves the formation of methane by microbes that live in oxygen-free environments. Abiotic methane formation proceeds under conditions at elevated temperature and/or pressure. Here we present a chemical reaction that readily forms methane from organosulphur compounds under highly oxidative conditions at ambient atmospheric pressure and temperature. When using iron(II/III), hydrogen peroxide and ascorbic acid as reagents, S-methyl groups of organosulphur compounds are efficiently converted into methane. In a first step, methyl sulphides are oxidized to the corresponding sulphoxides. In the next step, demethylation of the sulphoxide via homolytic bond cleavage leads to methyl radical formation and finally to methane in high yields. Because sulphoxidation of methyl sulphides is ubiquitous in the environment, this novel chemical route might mimic methane formation in living aerobic organisms.
The greenhouse gas methane (CH4) is the most abundant reduced organic trace gas in the atmosphere and has an important role in tropospheric and stratospheric chemistry. Various sources of CH4 are known to exist in nature, and, recently, the number of suggested biological sources has been increased1,2,3,4. However, the mechanism of CH4 formation in eukaryotes still needs to be elucidated and precursor compounds to be identified.
In general, natural formation of CH4—so-called methanogenesis—can be classified into biotic and abiotic types. Biotic methanogenesis is usually associated with archaea, living under anaerobic conditions in wetlands, rice fields, landfills or the gastrointestinal tracts of ruminants and termites. Abiotic formation of CH4 has been reported to occur under conditions that require high pressure and/or temperature, for instance, during biomass burning or serpentinization of olivine, under hydrothermal conditions in the oceans’ depths or below tectonic plates5,6,7. In the chemical industry, CH4 is often produced from carbon monoxide and hydrogen gas under elevated pressure and temperature (cf. Fischer–Tropsch synthesis).
Over the past few years, CH4 formation without the help of methanogens has also been observed in living biological systems such as plants1,8,9,10, fungi2 and animals3,4. Whereas the biochemistry of methanogenesis in microbes (procaryotes) is well described11,12, possible pathways of aerobic CH4 generation from plants, fungi and animals (eukaryotes) have yet to be determined. A comprehensive understanding of all environmentally important CH4 sources and sinks, as well as the parameters that control emissions is a prerequisite to fully understanding the global biogeochemical cycle of CH4.
In particular, CH4 formation and emissions by both dead and living plants8 has been intensely discussed in recent years1,13,14. It has been shown that CH4 can be produced abiotically from plant material by exposing it to ultraviolet (UV) irradiation15,16,17,18. A reaction of reactive oxygen species (ROS) with methoxyl groups of pectic polysaccharides was suggested as a possible route to CH4 formation under UV radiation19. On the other hand, several recent studies2,9,10, using 13C-labelled plant and fungal species, have demonstrated that there is also continuous formation of CH4 in living plants and fungi without any microbial contribution. It has been hypothesized that hetero-bonded methyl groups of biomolecules such as the sulphur-containing amino acid methionine or the ammonium salt choline might be carbon precursors of CH4 in living cells1,2,3,10,20,21,22. Althoff et al.23 recently showed that ascorbic acid (ASC) produces small amounts of CH4 when using a combination of an iron oxyhydroxide and hydrogen peroxide (H2O2) as an oxidizing system. Biomimetic iron complexes are generally designed to mimic the biocatalytic activity of mono- and di-oxygenase enzymes24. This includes the oxidative metabolism of sulphides to yield sulphoxides, sulphones and S-dealkylation products (thiols and aldehydes). However, no chemical pathway producing CH4 under these conditions has been described so far.
In this work, we investigate a chemical reaction system containing iron(II/III), H2O2 and ASC that uses organic compounds with hetero-bonded methyl groups for the generation of CH4 under ambient (1,000 mbar and 22 °C) and aerobic (~\n21% O2) conditions. In particular, several S-methyl substituted sulphides, sulphoxides and sulphonium salts such as L-methionine (MET), S-adenosylmethionine (SAM), dimethylsulphoniopropionate (DMSP) and dimethyl sulphoxide (DMSO) are studied. Compounds with nitrogen and oxygen hetero-bonded methyl groups such as choline chloride (CC) and guaiacol (GU; 2-methoxyphenol) are also investigated. Most of the selected compounds are known to have a key role in bio-methylation reactions and methyl group metabolism of plants, fungi and animals25 (Supplementary Note 1). We describe a chemical reaction that readily forms CH4 from organosulphur compounds under highly oxidative conditions. We hypothesize that this novel chemical route might mimic CH4 formation in living aerobic organisms such as plants, fungi, algae and mammals.
Formation of CH4 from organosulphur compounds
A selection of organic compounds with hetero-bonded methyl groups were investigated to serve as possible CH4 precursors when ASC, ferrihydrite (FH; 5Fe2O3·9H2O) and H2O2 were used as reagents in aqueous solution under ambient conditions.
Figure 1 shows the conversion/yield of CH4 formed from each of the investigated compounds. All substrates with sulphur-bonded methyl groups showed significant CH4 production but with tremendously varying yields, ranging from 0.4 to 83% (Fig. 1a,b) under the applied conditions. MET and its sulphoxidation product, methionine sulphoxide (MSO), showed similar yields of ~\n10%, whereas methionine sulphone (MSO2), the further oxidized form of MSO, showed little evidence of CH4 formation (<0.4%). SAM, a sulphonium derivative of MET, also showed little conversion to CH4 (~\n0.4%). A high yield of CH4 (~\n40%) was observed for the aromatic compound methyl phenyl sulphoxide (MPSO). Methyl phenyl sulphide (thioanisole) showed a somewhat lower yield of CH4 (~\n23%). DMSP and 2-(methylthio)ethanol produced CH4 at conversion rates (8% and 15%, respectively) that were in a similar range to those observed for MET and MSO. DMSO produced the highest CH4 conversion rate of 83%. CH4 formation was not observed in any experiment in the absence of H2O2 or iron minerals or ASC.
CH4 formation from DMSO has been described before26,27,28: hydroxyl radicals, produced via radiolysis of water or via Fenton’s reaction, have been shown to react with DMSO to produce methyl radicals. This reaction leads to CH4, ethane (C2H6), methanol and/or formaldehyde, depending on the reaction conditions26,27,28,29. However, under conditions used in our experiments (iron(II/III), ASC and H2O2), when FH is replaced by water-soluble iron salts that are believed to produce hydroxyl radicals (Fenton’s reaction), very little CH4 production was observed (<1%; Supplementary Fig. 1). This observation is consistent with a reaction pathway for CH4 formation from DMSO that differs from that described previously. Specifically, it appears that there must be another oxidant since hydroxyl radicals are known to be quenched by the antioxidant ASC30.
Compounds with N-methyl and O-methyl groups such as betaine, N,N-dimethylaniline, and GU showed no measurable formation of CH4 in our experiments (Fig. 1c). The only exception was CC, a quaternary ammonium salt, that showed little CH4 conversion (≈0.6%). No CH4 formation was found when using the amino acid leucine.
To unravel the reaction pathway of CH4 formation, we focused on MET and MSO since they both showed considerable CH4 formation at similar yields, and also have a vital role in most living organisms.
Identification of the CH4 precursor carbon atom
We expected the S-methyl group of MET to be the carbon precursor of CH4. This was tested with positionally labelled 13CH3-MET and measuring stable carbon isotope values (δ13C values) of CH4, using gas chromatography combustion isotope ratio mass spectrometry (GC-C-IRMS). When 13CH3-MET (~\n2% 13C) was used for the reaction, the δ13C values of CH4 changed drastically to more positive values (from −47 to +763‰ versus Vienna Pee Dee Belemnite, VPDB), and reflected the anticipated δ13C values when considering the isotopically labelled methyl group as the CH4 precursor. These results unambiguously identify the sulphur-bonded CH3 group of methionine as the carbon precursor of CH4.
Parameters that control CH4 production
The amount of CH4 produced was found to vary according to the type of iron species, concentrations of H2O2 and ASC, pH and gas atmosphere used.
In addition to FH (5Fe2O3·9H2O), we investigated other oxyhydroxides such as goethite, α-FeO(OH), lepidocrocite, γ-FeO(OH), the iron oxide haematite (HT; Fe2O3) and soluble Fe2+ and Fe3+ salts (Fig. 2 and Supplementary Table 1). All iron species investigated showed significant CH4 formation in the reaction with MET, ASC and H2O2, but there were large differences in conversion efficiency between the iron minerals and the soluble Fe2+ and Fe3+ salts. After a reaction time of 5 h, FH showed the highest CH4 formation of ~\n5%, followed by the other iron minerals (~\n3%), whereas formation of CH4 induced by the Fe2+ and Fe3+ salts was much lower (~\n0.5%). The yields of CH4 increased further to values ranging from 11 to 15% for the iron minerals, with HT showing the highest formation, whereas the Fe2+ and Fe3+ salts showed a considerably lower conversion ratio of ~\n2–3%. After 48 h, for all iron species, no further CH4 increase was observed. Since the core of the iron storage protein of many living systems, ferritin, has a structure similar to that of FH31, the iron oxyhydroxide FH was used for all further experiments. From Fig. 2, it appears that the formation of CH4 may depend on the kinetics of the dissolution process of the iron minerals, that is, on a low steady-state concentration of Fe2+ in solution. However, a heterogenous process, involving the solid catalysts, might be also conceivable.
A set of experiments was designed to maximize CH4 production by altering the molar ratio of ASC and H2O2 while maintaining a constant amount of FH and MET (Supplementary Fig. 2). Maximum CH4 formation was observed with a molar ratio of H2O2: ASC of 2:1 (50 μmol ASC and 100 μmol H2O2). When adding MET to this ratio of ASC and H2O2, a linear correlation between CH4 formation and the amount of added MET was observed (Fig. 3).
The influence of pH on CH4 production was monitored in the pH range of 1–9. The highest yield of CH4 was found at pH 3, the pH generally observed in our experiments (Supplementary Fig. 3 and Supplementary Table 2). The influence of O2 concentration (in the surrounding headspace) on the yield of CH4 was also studied. Interestingly, production of CH4 under ambient and anaerobic conditions was basically identical, whereas under a pure O2 atmosphere the yield was reduced by ~\n50 % (Supplementary Fig. 4). We measured the O2 content of the headspace and aqueous solution in our standard reaction mixture (4 μmol FH, 50 μmol ASC, 100 μmol H2O2, 0.5 μmol MET, 1 ml H2O, headspace 360 ml containing ~\n21% O2, ambient temperature and ambient atmosphere) vessel over the entire reaction period of 30 h. Although the O2 concentration in the headspace remained relatively constant (100% atmospheric air saturation) throughout the measurement period, the aqueous solution was found to be close to zero and then to rise gradually (ranging from 0 to 60% atmospheric air saturation; Supplementary Fig. 5). The low levels of O2 found in aqueous solution can be explained by its rapid consumption by methyl radicals, which is discussed in much more detail below.
Postulated route of CH4 formation
Figure 4 shows a novel reaction mechanism for CH4 formation from MET, which is in agreement with and supported by our experimental data. The central observations are as follows: (i) MET is oxidized to MSO, which then produces CH4 and other products in the following reaction steps; and (ii) CH4 originates from the methyl group of MET (13C isotope labels are highlighted in red).
In solution, ASC is deprotonated (pKa=4.37), leading in general to a pH value of ~\n3 in the solutions used for our experiments. Under these conditions, the crystalline FH is reductively dissolved by ASC, releasing slowly Fe2+ to produce a low steady-state concentration of Fe2+ over several hours. The Fe2+ ions are oxidized by H2O2 to produce Fe3+, [FeIV=O]2+ (ferryl species) and ·OH. The ·OH radicals might lead to unspecific radical reactions but they are trapped by ASC, which is transformed to dehydroascorbic acid. Experimentally, this is supported by the fact that little formation of CH4 was observed from MET and DMSO when Fe2+ or Fe3+ salts were used as the iron source instead of FH (Fig. 2 and Supplementary Fig. 1); under these Fenton-type conditions, the reaction should be fast and complete within a few minutes. Therefore, the low steady-state concentration of Fe2+ (reductive dissolution of FH, formation of dehydroascorbic acid + 2H+ + 2e−) is of importance.
An alternative oxidant in aqueous Fe2+/H2O2 systems is [FeIV=O]2+, and this ferryl species is known from nonhaeme iron enzymes and corresponding biomimetic oxidation catalysis24,32 to be a powerful oxidant in aqueous solution33,34,35,36. Bispidine-type ligands have been shown to efficiently support the ferryl centre for oxidation catalysis. Thorough mechanistic studies of these systems have been reported (for structures of the ligands and ferryl complexes and more details of the model chemistry, see Supplementary Figs 6 and 7, and Supplementary Notes 2 and 3)37,38. To support the proposed mechanistic scenario in Fig. 4, we have therefore replaced FH in our test reaction (FH, H2O2, ASC and MET) by an iron bispidine complex ([(L1)FeIV=O]2+) and shown that analogous products and product ratios are produced under otherwise identical experimental conditions (Supplementary Table 3). Based on known iron bispidine chemistry, this indicates that a ferryl ion transfers the oxo group to MET forming MSO39, and a second ferryl species may react as electrophile with the methyl group of MSO to produce a ·CH3 radical, similar to known reactivities of the ferryl species with C–H bonds40. Importantly, the sulphoxidation of a thioether (for example, MET or thioanisole) is much faster than that of the sulphoxide product MSO (or MPSO) to form the corresponding sulphone (MSO2 or methyl phenyl sulphone; see Supplementary Figs 7 and 8 for a kinetic analysis of the thioanisole/MPSO example: the oxidation of the thioether is more than two orders of magnitude faster than that of the sulphoxide; methyl phenyl sulphone was found as a product but not quantified, that is, the oxidation of MPSO may lead to different products, for example, methyl phenyl sulphone (oxygen transfer), ·CH3 radicals (CH3 abstraction) or sulphoxide radical cations (electron transfer)).
To further support this assumption, the produced ·CH3 radicals were trapped with DMPO (5,5-dimethyl-pyrroline-N-oxide) and unambiguously characterized by electron paramagnetic resonance (EPR) spectroscopy (for details, see Supplementary Fig. 9 and Supplementary Note 4). Because of the high reactivity of the spin trap DMPO with radicals, all aqueous solutions, especially the DMPO solution, were carefully degassed. However, because of disproportionation and radical reactions, aqueous H2O2 solutions contain some O2 and ·OH radicals (Supplementary Fig. Note 4). Therefore, in aqueous solutions of the spin trap (DMPO, 100 mmol), H2O2 (0.25 mmol), MPSO (2.5 mmol) and iron(II)triflate (0.25 mmol) both ·OH and ·CH3 radicals are detected, the latter only as a minor species (Fig. 5a). When ASC (0.25 mmol) was added, the EPR spectrum shows the ·CH3 radicals as the major species since ASC traps ·OH radicals more efficiently than ·CH3 radicals (Fig. 5b). This supports our interpretation that the formation of CH4 is induced by ferryl species rather than ·OH radicals, since these are efficiently quenched under the conditions of our experiments.
The formation of methyl radicals is further supported by the formation of C2H6 (13C-labelled). However, C2H6 is, as expected, formed in very low quantities, with a C2H6/CH4 ratio below 0.01. It has been shown that formation of C2H6 by the recombination of methyl radicals occurs in water and depends on the experimental parameters27,41,42. In those studies, much higher C2H6/CH4 ratios (>0.1) were reported because of the fast kinetics (for example, ·OH radical formation by water radiolysis), generating a higher steady-state concentration of methyl radicals.
The slow formation of Fe2+ from FH and of [FeIV=O]2+ by oxidation with H2O2 leads to a small steady-state concentration of ·CH3 radicals that might explain the almost exclusive CH4 formation (low C2H6/CH4 ratio) observed in our study: a fast oxidation of FeII with H2O2 leads to much lower CH4 formation in the investigated system, as was shown by the experiments using Fe2+ and Fe3+ salts and MET and DMSO as thioethers (Fig. 2 and Supplementary Fig. 1). The observation that the bispidine–ferryl complexes yield similar products and product ratios under similar conditions indicates that the observed reaction with FH is a homogenous process. There are competing oxidation reactions of the methyl radical with H2O2 or O2, yielding methanol, formaldehyde and formic acid41,42. Specifically, the reaction of ·CH3 radicals with O2 is very likely43. Formation of methanol was confirmed during our reaction but not quantified so far. The reaction of ·CH3 radicals with O2, forming methanol and other oxidative products (for example, peroxides and formaldehyde)42,43, is ~\n3–5 orders of magnitude faster than that with other substrates present, leading to CH4 (H atom transfer from alkanes, alkyl groups, ASC and H2O2), that is, CH4 is only produced at low concentration of O2 (dioxygen shunt, pathways (1) and (2) in Fig. 4; for kinetic parameters, see Notre Dame Radiation Laboratory (NDRL)/National Institute of Standards and Technology (NIST) solution kinetics database, http://kinetics.nist.gov/solution/). This is supported by the low yield of CH4 in a pure dioxygen atmosphere (Supplementary Fig. 4) and also explains the observed maximum yield of 20% CH4 relative to MET. Importantly, our mechanism indicates that CH4 formation is possible under ambient atmosphere but does not require O2, which agrees with the observation that our standard reaction also produces CH4 under N2 (similar yield; Supplementary Fig. 4). We suggest that the reaction is induced by ferryl species rather than ·OH radicals. This emerges from the fact that ASC efficiently quenches the ·OH radicals, and that the model reaction with the bispidine–ferryl complexes, which are mechanistically well studied, produce under similar conditions similar amounts of the respective products, specifically of CH4.
Further products identified by their accurate mass using liquid chromatography–time of flight MS (LC–TOFMS) during the reaction (Supplementary Note 5) are also shown in Fig. 4. Obviously, both S–C bonds of MSO may be attacked by the ferryl group. Thus, formation of CH4 and 2-amino-butanoic acid were assumed to result from a reduction of the carbon atoms, whereas methanesulphonic acid identified by high-performance liquid chromatography (HPLC) and homocysteic acid were oxidation products. Two additional products having accurate mass values and adducts consistent with empirical formulae C4H9NO3S and C4H8O4S were identified by LC–TOFMS. Although these formulae are compatible with structures such as the previously unreported homocysteine sulphenic acid and 2-hydroxy-4-sulphenobutanoic acid; sulphenic acids are normally found to be highly reactive transient compounds that are difficult to detect and isolate unless stabilized by steric hindrance44 or intramolecular H-bonding involving a seven-membered ring45. However, in view of the known instability of most sulphenic acids44, much stronger evidence will be required before the structures for the minor products can be confirmed and thus they are not shown as decay products in Fig. 4.
The detailed mechanism of the electrophilic attack of the ferryl species at the CH3–(S=O)–R bond(s), the kinetics of the two proposed pathways (formation of CH4, CH3OH and /or other products in our closed system and, in general, as a function of the reaction conditions), as well as a possible involvement of ·OH radicals clearly need detailed further studies, and these will involve density functional theory (DFT)-based computational and further experimental investigations.
The results reported here show that CH4 is formed from both dialkyl and alkyl aryl thioethers under highly oxidative conditions at ambient atmospheric pressure and temperature. High CH4 yields were observed from both aliphatic and aromatic methyl sulphides and the corresponding sulphoxides. The applied iron species together with H2O2 are known to catalyse a range of non-selective hydrocarbon oxidations. However, they also act as biomimetic ferryl systems to catalyse hydrocarbon oxidations with high chemo-, regio- and stereo-selectivity24,46. Ferryl species also catalyse heteroatom oxidation of methyl sulphides to yield sulphoxides and sulphones and S-dealkylation to give thiols and formaldehyde. Our experiments show that these systems can also support reductive demethylation of sulphoxides yielding CH4 as the final dealkylation product at low local oxygen concentration.
Methyl sulphides are present in the environment as both natural and anthropogenic products and metabolites from S-methyltransferase-catalysed methylation of thiols and their 1,2-disulphide precursors. The interaction of ASC with FH in particular has a strong biochemical connection, since the inorganic core of ferritin, nature’s Fe sequestration protein common to living organisms, is presumably FH. Ferritins are important iron storage and detoxification proteins that are widely distributed in living kingdoms. ROS, including H2O2, are continuously produced at different rates in biological systems due to biotic and abiotic stress reactions. Hence, our observations of the interaction of ASC with H2O2, FH and methyl sulphides and sulphoxides might have relevance to understanding CH4 formation under oxidative conditions in biochemical systems such as in terrestrial and aquatic plants, fungi and mammals1,2,3,4,10. The sulphur-containing amino acid MET and the sulphonium salt DMSP are of particular global and biochemical importance. Methionine is known to be a key factor in many biochemical reactions in plants, fungi and animals, and it has been recently shown2 to be a CH4 precursor in fungi. However, so far methionine has not been shown to be a precursor of CH4 in living plants. To test this hypothesis tobacco plants (Nicotiana tabacum) that were grown under sterile conditions were supplemented with positionally labelled MET, where only the methyl group (–S–CH3) was enriched with 13C atoms (99% 13CH3). For these isotope tracer experiments, leaves and roots of the tobacco plants were separately treated with 13C-MET (Fig. 6) at different concentrations. As expected, at time zero after initial treatment with labelled or unlabelled MET, all samples showed CH4 stable carbon isotope values (δ13C(CH4) values) of approximately −46‰ (ranging from −45.4 to −47.1‰), closely reflecting the atmospheric background δ13C(CH4) values of the laboratory air (−46.1±0.5‰). As also expected, δ13C(CH4) values of the headspace of the tobacco plants containing unlabelled MET did not change significantly over the incubation period. In contrast, δ13C(CH4) values in the headspace of the tobacco plants supplemented with 13C-MET at different concentrations, both to the leaves and roots, showed a continuous increase over the entire incubation period clearly showing that the thio-methyl group acts as precursor of plant-derived CH4 (for more details, see Supplementary Note 6). Although these experiments do not give information about the pathway of CH4 formation in plants, they provide evidence that the thio-methyl group of MET is a precursor of CH4.
Methionine residues in proteins are particularly sensitive to oxidation by ROS and thus have been suggested to defend against oxidative stress47. The sulphur-containing amino acids methionine and cysteine are more easily oxidized than the other amino acids. The oxidation of MET to MSO by H2O2 is common in cells48,49. Peroxides, including H2O2, hydroperoxides and peroxy acids, are efficient oxidants of organic sulphides in aqueous solutions. For example, the oxidation of methionine groups by hydroperoxides is a major pathway for the degradation of therapeutic proteins. DMSP, an algal osmolyte that is abundant in marine phytoplankton and comprises 1–10% of the carbon in some algal species50, serves also as a precursor for the volatile compounds dimethyl sulphide (DMS) and DMSO in seawater. Thus, it could be envisaged that these thioethers and sulphoxides might be a direct precursor of CH4 formed in oxic and suboxic waters, and could help to overcome the so-called ‘oceanic methane paradox’. The highest CH4 formation rates might be expected from aerobic organisms particularly when under hypoxia. This important consideration is in agreement with previous results that showed enhanced CH4 formation in animal cells under reduced oxygen content3,4. Finally, we suggest that the CH4 pathway described herein might be considered as an ‘oxidative counterpart’ of the final step of biological CH4 formation in methanogenic archaea where the methyl coenzyme M reductase catalyses the reaction between thioether methyl coenzyme M and the thiol N-(7-mercaptoheptanoyl)threonine 3-O-phosphate to give CH4 and the mixed disulphide51.
Compounds tested as methane precursor
SAM, MET, MSO, MSO2, 2-(methylthio)ethanol, DMSP, DMSO, methyl phenyl sulphide, MPSO, CC, betaine, N,N-dimethylaniline, GU and leucine (LEU) were all tested for their potential to release CH4. An amount of 4 μmol FH (40 μmol Fe) was weighted into 1.5 ml crimp vials. These vials were then placed into the 360 ml vials that were sealed using a hole-type screw cap (Supelco, cat. no. 27187) fitted with a polytetrafluorethylen (PTFE)/silicone septum (Supelco, cat. no. 27188-U) before 0.5 μmol of the organic compound dissolved in 0.4 ml H2O, 50 μmol ASC dissolved in 0.5 ml H2O and 100 μmol H2O2 in 0.1 ml H2O, were injected to each 1.5 ml vial through the septum. All samples were prepared under normal laboratory conditions. The samples were incubated at 22±2 °C for a time period of up to 120 h before CH4 headspace analysis.
Organic compounds and iron salts were obtained from Sigma, Deisenhofen, Germany, in the highest purity available. The iron minerals FH, goethite, HT and lepidocrocite were synthesized as prescribed by Schwertmann and Cornell52. Surface areas and particle sizes of the iron minerals are presented in the Supplementary Table 1. Double distilled H2O filtered with an ELGA UHQ-II-MK3 was used for these investigations.
Headspace (5 ml) from the sealed glass vials was sampled using a Hamilton gas syringe needle and analysed by a gas chromatograph (GC; column: 2 m, Ø=3.175 mm (inner diameter) high-grade steel tube packed with Molecular Sieve 5A 60/80 mesh from Supelco) equipped with a GC–flame ionization detector (Shimadzu GC-14B). Quantification of CH4 was performed by direct comparison of peak area with that obtained with two reference standards containing 8.905 and 1.835 p.p.m. All samples were prepared in triplicate (n=3) unless otherwise stated in the manuscript. Control samples (blanks) were prepared in a similar manner to that described for the samples but without the addition of methyl substituted substrates. The control measurements usually reflected the CH4 background concentration of the laboratory (range 2–2.2 p.p.m.).
Stable carbon isotope measurements
δ13C values of CH4 were measured by a GC-C-IRMS procedure. The GC-C-IRMS system consisted of a cryogenic pre-concentration unit directly coupled to an HP 6890N GC (Agilent Technologies, Santa Clara, USA), which is connected to a DeltaPLUSXL isotope ratio mass spectrometer (ThermoQuest Finnigan, Bremen, Germany) via an oxidation reactor (ceramic tube (Al2O3), length 320 mm, 0.5 mm i.d., with oxygen activated Cu/Ni/Pt wires inside, reactor temperature 960 °C) and a GC Combustion III Interface (ThermoQuest Finnigan). The GC was fitted with a GS-Carbonplot capillary column (30 m × 0.32 mm i.d., df 1.5 μm; Agilent Technologies) and a PoraPlot capillary column (25 m × 0.25 mm i.d., df 8 μm; Varian, Lake Forest, USA). The columns were coupled using a press fit connector.
Aliquots of headspace gas from samples were transferred to an evacuated sample loop (40 ml). CH4 was separated from interfering compounds by GC, trapped on Hayesep D and then transferred to the GC-C-IRMS system. All 13C/12C isotope ratios (δ13C values) are expressed in the conventional δ notation in per mil versus VPDB, defined as:
A tank of high-purity carbon dioxide (carbon dioxide 4.5, Messer Griesheim, Frankfurt, Germany) with a known δ13C value of −23.63‰ (VPDB) was used as the working reference gas. All δ13C values obtained from analysis of CH4 were corrected using three CH4 working standards (Isometric Instruments, Victoria, Canada) calibrated against International Atomic Energy Agency and NIST reference substances. The calibrated δ13C values of the three working standards in ‰ versus VPDB were −23.9±0.2, −38.3±0.2 and −54.5±0.2‰. Samples were routinely analysed three times (n=3) and average s.d. of CH4 δ13C values ranged from 0.1 to 0.3‰.
Methionine isotope labelling experiments
Position-specific 13C labelling experiments were conducted with methionine that had a significant 13C enrichment of the carbon atom of the thio-methyl group. Preparation of 13C-enriched 13CH3-MET was performed by gravimetrically mixing of 13CH3-MET (Sigma-Aldrich, Taufkirchen, Germany; Isotec 99% 13C atoms) with unlabelled MET (Sigma-Aldrich; CAS number 63-68-3, 1.07% 13C atoms) at a ratio of 1:99. Based on the ratio of gravimetrical mixing, the amount of 13C in the thio-methyl group was calculated to be 2±0.05%, corresponding to a δ13C (-S-methyl-13C) value of 822±50‰. The measured and corrected δ13C(CH4) value for the headspace gas of the sample was 763±16‰, and thus reflected closely the δ13C(-S-methyl-13C) value of the isotopically labelled thio-methyl group. δ13C(CH4) value of the background (laboratory air) was −46.1±0.3‰.
Tobacco plants cultivated under sterile conditions
The medium used for tobacco plants (N. tabacum) was as follows: 4.56 g l−1 MS salts, 20 g l−1 sucrose and 10 g l−1 (plant) agar. The pH of all media was adjusted to 5.8 using KOH. Media was placed into purpose-made glass vials that were fitted with a sampling side port sealed with a hole-type screw cap containing a PTFE/silicone septum. An apical cutting of N. tabacum grown under sterile conditions was placed in the medium through the opening at the top, the opening covered with aluminium foil and the vial placed under a light relay (150 μE m−2 s−1) with 14 h daylight phase. Experiments were conducted after rooting when plants had grown to ~\n8–10 cm under indoor low-light conditions with no UV contribution.
Supplementation of tobacco plants with 13C methionine
Tobacco plants were grown in the vials described above. Leaf infiltration (cf. Voinnet et al.)53 was carried out by infiltrating 0.3 ml of a 50 mM or 10 μM 13C methionine (99% 13C-MET) solution into the abaxial air spaces of the plants. For root application, the growth medium was first removed from the roots, and the plants were carefully placed inside a sterile glass beaker containing 15 ml 13C-MET solution (30 μM) such that only the roots were in direct contact with the solution. Plants and beakers were placed inside the glass vials described above. Control samples were prepared in the same way using unlabelled MET solution. After each treatment, the vials were closed using a glass plate and an O-ring fixed with a clamp and placed under the light relay at 24±1 °C. For isotope measurements, the incubation flask was directly connected to the IRMS system.
An oxygen microoptode (PreSens, Regensburg, Germany; measurement based on dynamic fluorescence quenching) was used to continuously measure the oxygen concentration (μM) in the headspace or aqueous solution of the sample. Two-point calibrations were performed; argon and lab air were used to calibrate the 0 and 100% air saturation points. Hundred percent atmospheric saturation (~\n21% O2 in lab air) corresponds to ~\n260 μM O2 in aqueous solution (25 °C). Before the start of the experiment both the headspace and the medium were in equilibrium at ~\n260 μM O2.
Continuous-wave X-band EPR spectra (ca. 9 GHz) at ambient temperature (298 K; the solutions were measured in a capillary cell) were performed on a Bruker Biospin Elexsys E500 EPR spectrometer fitted with a super high Q cavity. The magnetic field and the microwave frequency were calibrated with a Bruker ER 041XK Teslameter and a Bruker microwave frequency counter. The spin trap DMPO was purchased from Sigma-Aldrich. The DMPO solution was purified with activated charcoal, filtered and verified for the absence of EPR signals caused by contamination. All EPR samples were measured 10 min after preparation. The simulated and experimental spectra were visualized with Bruker’s Xepr software suite54. The experimental spectra were simulated with the computer simulation software packages XSophe-Sophe-XeprView54.
Samples were neutralized with NaOH and centrifuged for 5 min at 14,000 r.p.m. The supernatant liquid was transferred, centrifuged again at 2,000 r.p.m. for 10 min and then an aliquot removed for MS analysis.
LC–TOFMS analyses were conducted using an Agilent 1100 series high-performance liquid chromatography coupled to an Agilent 6510 Q-TOF (Agilent Technologies). Chromatography was performed using a reverse phase column (Agilent Eclipse Plus C18, 5 μm, 150 × 2.1 mm) together with the corresponding guard column (5 μm, 12.5 × 2.1 mm). The mobile phase consisted of 95% methanol containing 0.1% formic acid in channel A, and 5% methanol containing 0.1% formic acid in channel B. The system was programmed to perform an analysis cycle consisting of 100% B for 1 min, followed by gradient elution from 100 to 5% B over a 14-min period, hold at 5% B for 10 min, return to initial conditions over 2 min and then hold these conditions for a further 8 min. The flow rate was 0.20 ml min−1 and the injection volume was 5 μl. The MS experiments were carried out using ESI in positive ion mode with the capillary voltage set at 4.0 kV. The desolvation gas was nitrogen set at a flow rate of 8 l min−1 and maintained at a temperature of 350 °C.
How to cite this article: Althoff, F. et al. Abiotic methanogenesis from organosulphur compounds under ambient conditions. Nat. Commun. 5:4205 doi: 10.1038/ncomms5205 (2014).
Keppler, F. et al. Methane formation in aerobic environments. Environ. Chem. 6, 459–465 (2009).
Lenhart, K. et al. Evidence for methane production by saprotrophic fungi. Nat. Commun. 3, 1046 (2012).
Ghyczy, M. et al. Hypoxia-induced generation of methane in mitochondria and eukaryotic cells—an alternative approach to methanogenesis. Cell Physiol. Biochem. 21, 251–258 (2008).
Tuboly, E. et al. Methane biogenesis during sodium azide-induced chemical hypoxia in rats. AJP Cell Physiol. 304, C207 (2013).
Sherwood Lollar, B., Westgate, T. D., Ward, J. A., Slater, G. F. & Lacrampe-Couloume, G. Abiogenic formation of alkanes in the Earth's crust as a minor source for global hydrocarbon reservoirs. Nature 416, 522–524 (2002).
Sherwood Lollar, B. et al. Abiogenic methanogenesis in crystalline rocks. Geochim. et Cosmochim. Acta 57, 5087–5097 (1993).
Holm, N. G. & Charlou, J. L. Initial indications of abiotic formation of hydrocarbons in the Rainbow ultramafic hydrothermal system, Mid-Atlantic Ridge. Earth Planet. Sci. Lett. 191, 1–8 (2001).
Keppler, F., Hamilton, J. T. G., Braß, M. & Röckmann, T. Methane emissions from terrestrial plants under aerobic conditions. Nature 439, 187–191 (2006).
Brüggemann, N. et al. Nonmicrobial aerobic methane emission from poplar shoot cultures under low-light conditions. New Phytol. 182, 912–918 (2009).
Wishkerman, A. et al. Enhanced formation of methane in plant cell cultures by inhibition of cytochrome c oxidase. Plant Cell Environ. 34, 457–464 (2011).
Thauer, R. K. Biochemistry of methanogenesis. Microbiology 144, 2377–2406 (1998).
Conrad, R. The global methane cycle: recent advances in understanding the microbial processes involved. Environ. Microbiol. Rep. 1, 285–292 (2009).
Dueck, T. A. et al. No evidence for substantial aerobic methane emission by terrestrial plants: a 13C-labelling approach. New Phytol. 175, 29–35 (2007).
Nisbet, R. E. R. et al. Emission of methane from plants. Proc. R. Soc. B 276, 1347–1354 (2009).
Keppler, F. et al. Methoxyl groups of plant pectin as a precursor of atmospheric methane: evidence from deuterium labelling studies. New Phytol. 178, 808–814 (2008).
McLeod, A. R. et al. Ultraviolet radiation drives methane emissions from terrestrial plant pectins. New Phytol. 180, 124–132 (2008).
Vigano, I. et al. Effect of UV radiation and temperature on the emission of methane from plant biomass and structural components. Biogeosciences 5, 937–947 (2008).
Bruhn, D., Mikkelsen, T. N., Willats, W. G. T. & Ambus, P. Effects of temperature, ultraviolet radiation and pectin methyl esterase on aerobic methane release from plant material. Plant Biol. 11, 1–6 (2009).
Messenger, D. J., McLeod, A. R. & Fry, S. C. The role of ultraviolet radiation, photosensitizers, reactive oxygen species and ester groups in mechanisms of methane formation from pectin. Plant Cell Environ. 32, 1–9 (2009).
Ghyczy, M., Torday, C. & Boros, M. Simultaneous generation of methane, carbon dioxide, and carbon monoxide from choline and ascorbic acid—a defensive mechanism against reductive stress? FASEB J. 17, 1124–1126 (2003).
Bruhn, D., Møller, I. M., Mikkelsen, T. N. & Ambus, P. Terrestrial plant methane production and emission. Physiol. Plant 144, 201–209 (2012).
Wang, Z.-P., Chang, S X., Chen, H. & Han, X.-G. Widespread non-microbial methane production by organic compounds and the impact of environmental stresses. Earth Sci. Rev. 127, 193–202 (2013).
Althoff, F., Jugold, A. & Keppler, F. Methane formation by oxidation of ascorbic acid using iron minerals and hydrogen peroxide. Chemosphere 80, 286–292 (2010).
Que, L. & Tolman, W. B. Biologically inspired oxidation catalysis. Nature 455, 333–340 (2008).
Michal, G. Biochemical Pathways. an Atlas of Biochemistry and Molecular Biology Wiley, Spektrum (1999).
Repine, J. E., Fox, R. B. & Berger, E. M. Dimethyl sulfoxide inhibits killing of Staphylococcus aureus by polymorphonuclear leukocytes. Infect. Immun. 31, 510–513 (1981).
Eberhardt, M. K. & Colina, R. The reaction of OH radicals with dimethyl sulfoxide. A comparative study of Fenton's reagent and the radiolysis of aqueous dimethyl sulfoxide solutions. J. Org. Chem. 53, 1071–1074 (1988).
Herscu‐Kluska, R., Masarwa, A., Saphier, M., Cohen, H. & Meyerstein, D. Mechanism of the reaction of radicals with peroxides and dimethyl sulfoxide in aqueous solution. Chem. Eur. J. 14, 5880–5889 (2008).
Rachmilovich-Calis, S., Masarwa, A., Meyerstein, N., Meyerstein, D. & van Eldik, R. New mechanistic aspects of the Fenton reaction. Chem. Eur. J. 15, 8303–8309 (2009).
Tolbert, B. M. et al. inAscorbic Acid: Chemistry, Metabolism, and Uses (eds Seib P. A., Tolbert B. M. 589–604American Chemical Society (1982).
Michel, F. M. et al. The Structure of ferrihydrite, a nanocrystalline material. Science 316, 1726–1729 (2007).
Nam, W. High-valent iron(IV)–oxo complexes of heme and non-heme ligands in oxygenation reactions. Acc. Chem. Res. 40, 522–531 (2007).
Bautz, J. et al. Formation of an aqueous oxoiron(IV) complex at pH 2–6 from a nonheme iron(II) complex and H2O2. Angew. Chem. Int. Ed. 45, 5681–5684 (2006).
Anastasi, A. E., Comba, P., McGrady, J., Lienke, A. & Rohwer, H. Electronic structure of bispidine iron(IV) oxo complexes. Inorg. Chem. 46, 6420–6426 (2007).
Ensing, B., Buda, F. & Baerends, E. J. Fenton-like chemistry in water: oxidation catalysis by Fe(III) and H2O2 . J. Phys. Chem. A 107, 5722–5731 (2003).
Buda, F., Ensing, B., Gribnau, M. C. M. & Baerends, E. J. O2 evolution in the Fenton reaction. Chem. Eur. J. 9, 3436–3444 (2003).
Comba, P., Kerscher, M. & Schiek, W. inProgress in Inorganic Chemistry (ed. Karlin K. D. 613–704John Wiley & Sons, Inc (2008).
Wang, D. et al. Nonheme oxoiron(IV) complexes of pentadentate N5 ligands: spectroscopy, electrochemistry, and oxidative reactivity. Chem. Sci. 4, 282–291 (2013).
Jaccob, M., Comba, P., Maurer, M., Vadivelu, P. & Venuvanalingam, P. A combined experimental and computational study on the sulfoxidation by high-valent iron bispidine complexes. Dalton Trans. 40, 11276 (2011).
Comba, P., Maurer, M. & Vadivelu, P. Oxidation of cyclohexane by high-valent iron bispidine complexes: tetradentate versus pentadentate ligands. Inorg. Chem. 48, 10389–10396 (2009).
Hickel, B. Absorption spectra and kinetics of methyl and ethyl radicals in water. J. Phys. Chem. 79, 1054–1059 (1975).
Ulanski, P., Merenyi, G., Lind, J., Wagner, R. & Sonntag, C. von. The reaction of methyl radicals with hydrogen peroxide. J. Chem. Soc. Perkin Trans. 2, 673–676 (1999).
Rachmilovich-Calis, S., Masarwa, A., Meyerstein, N. & Meyerstein, D. The Fenton reaction in aerated aqueous solutions revisited. Eur. J. Inorg. Chem. 2005, 2875–2880 (2005).
Nagy, P. & Ashby, M. T. Reactive sulfur species: kinetics and mechanisms of the oxidation of cysteine by hypohalous acid to give cysteine sulfenic acid. J. Am. Chem. Soc. 129, 14082–14091 (2007).
Davis, F. A., Jenkins, L. A. & Billmers, R. L. Chemistry of sulfenic acids. 7. Reason for the high reactivity of sulfenic acids. Stabilization by intramolecular hydrogen bonding and electronegativity effects. J. Org. Chem. 51, 1033–1040 (1986).
Bautz, J., Comba, P., Lopez de Laorden, C., Menzel, M. & Rajaraman, G. Biomimetic high-valent non-heme iron oxidants for the cis-dihydroxylation and epoxidation of olefins. Angew. Chem. Int. Ed. 46, 8067–8070 (2007).
Luo, S. & Levine, R. L. Methionine in proteins defends against oxidative stress. FASEB J. 23, 464–472 (2008).
Vogt, W. Oxidation of methionyl residues in proteins: tools, targets, and reversal. Free Radic. Biol. Med. 18, 93–105 (1995).
Stadtman, E. R., Moskovitz, J., Berlett, B. S. & Levine, R. L. Cyclic oxidation and reduction of protein methionine residues is an important antioxidant mechanism. Mol. Cell. Biochem. 234/235, 3–9 (2002).
Matrai, P. A. & Keller, M. D. Total organic sulfur and dimethylsulfoniopropionate in marine phytoplankton: intracellular variations. Marine Biol. 119, 61–68 (1994).
Ellermann, J., Hedderich, R., Bocher, R. & Thauer, R. K. The final step in methane formation. Investigations with highly purified methyl-CoM reductase (component C) from Methanobacterium thermoautotrophicum (strain Marburg). Eur. J. Biochem. 172, 669–677 (1988).
Schwertmann, U. & Cornell, R. M. Iron Oxides in the. Laboratory Preparation and Characterization 2nd edn Wiley-VCH (2000).
Voinnet, O., Rivas, S., Mestre, P. & Baulcombe, D. An enhanced transient expression system in plants based on suppression of gene silencing by the p19 protein of tomato bushy stunt virus. Plant J. 33, 949–956 (2003).
Hanson, G. R. et al. XSophe-Sophe-XeprView. A computer simulation software suite (v. 1.1.3) for the analysis of continuous wave EPR spectra. J. Inorg. Biochem. 98, 903–916 (2004).
We thank John Hamilton for his thoughtful comments on an early version of this manuscript; Carl Brenninkmeijer, Dieter Scharffe, Markus Greule, Maren Emmerich, Sabine Studenroth, Christoph Tubessing, Christian Scholz and Stefan Rheinberger for their analytical support; Sonja Jung, Evelyne Kasparek and Ilka Hermes for their technical assistance; and Miklós Ghyczy, Heinz-Friedrich Schöler and Marion Kerscher for their helpful discussions. This work was funded by the European Science Foundation (EURYI Award to F.K.) and Deutsche Forschungsgemeinschaft (KE 884/2-1, KE 884/7-1 and KE 884/8-1).
The authors declare no competing financial interests.
About this article
Cite this article
Althoff, F., Benzing, K., Comba, P. et al. Abiotic methanogenesis from organosulphur compounds under ambient conditions. Nat Commun 5, 4205 (2014). https://doi.org/10.1038/ncomms5205
This article is cited by
Nature Communications (2023)
Journal of Soil Science and Plant Nutrition (2023)
Nature Communications (2022)