Direct conversion of light into mechanical work, known as the photomechanical effect, is an emerging field of research, largely driven by the development of novel molecular and polymeric material systems. However, the fundamental impediment is that the previously explored materials and structures do not simultaneously offer fast and wavelength-selective response, reversible actuation, low-cost fabrication and large deflection. Here, we demonstrate highly versatile photoactuators, oscillators and motors based on polymer/single-walled carbon nanotube bilayers that meet all the above requirements. By utilizing nanotubes with different chirality distributions, chromatic actuators that are responsive to selected wavelength ranges are achieved. The bilayer structures are further configured as smart ‘curtains’ and light-driven motors, demonstrating two examples of envisioned applications.
Reconfigurable materials that change their shape and functionality in response to external stimuli represent a novel class of materials that enable new applications1,2,3,4,5,6,7. Previous work includes shape-reconfigurable structures based on shape memory polymers8,9, bimorphs10,11, molecular motors12,13,14 and hydrogels15,16 that respond to light or heat. For example, azobenzene functional materials have been utilized for photoactuators based on cis–trans transformation driven by light irradiation12,17,18. However, the need for dual wavelength operation (UV and visible) for reversible actuation and slow response time (~10 s) limit their practical utility for certain applications12,17,18. Recently, nanotube-based photoactuation has been reported using different platforms, including bilayers19, composites20 and cantilever structures21, showing the promise of nanotubes for such applications. The principle actuation mechanism for most of these reported devices has been attributed to photo-induced charge build-up at the interfaces.
Here, we present a simple photoactuator device concept based on single-walled carbon nanotube (SWNT)/polymer bilayers that takes advantage of the highly intriguing photothermal properties of SWNTs. The actuators deliver large deflection, fast (~0.5 s) and user-defined, wavelength-selective response. Previous studies have utilized the strong optical absorbance of SWNTs22 in the near-infrared regime to induce significant local heating for photothermal cancer therapy. Furthermore, recent developments in the chirality purification of SWNTs have enabled the design of materials with desirable absorption properties and selective spectral response23,24,25. Building on these advancements, here we report a new class of highly versatile photoactuators based on SWNTs, with potential applications in smart curtains for energy-efficient windows, camouflage, sun-driven motors and oscillators, and monochromatic light sensors.
Figure 1a schematically illustrates the fabrication process of polymer/SWNT bilayers. The process is facile and scalable, which only involves vacuum filtration of a SWNT solution on a 10-μm-thick polycarbonate (PC) membrane (0.4 μm pore size). An optical image of a fabricated PC/SWNT bilayer structure is shown in Fig. 1b. The SWNTs form densely packed thin films on top of the PC membrane as seen from the scanning electron microscopy images in Supplementary Fig. S1. The thickness of the SWNT thin-film is controlled from ~0.2 to 2 μm by adjusting the total amount of the filtered SWNTs (Supplementary Fig. S2). Three types of nanotubes were explored: HiPCO, metal-enriched and (6,5) chirality-enriched SWNTs. In this bilayer structure, the SWNTs serve as an excellent light absorber layer with the specific wavelength range of absorption dependent on the type of nanotubes used26. The absorbed photon energy in nanotubes is readily converted to heat, which is then transported to the PC layer. The vacuum filtration ensures a mechanically coherent SWNTs/PC interface for effective heat transfer between the two layers. As the PC membrane has a large coefficient of thermal expansion of ~65 p.p.m. per Kelvin27, which is over 10 × larger than that of SWNTs (<4 p.p.m. per Kelvin)28, the structure is strongly curled (that is, deflected) towards the SWNT side upon light irradiation (Fig. 1a, right panel).
Photoresponse of bilayer actuators
The fast and reversible photoactuation of the PC/SWNT structures is evident from the optical photographs shown in Fig. 1c. Here, HiPCO nanotubes are used29. When the PC/SWNT bilayer is placed directly under a solar simulator with 1-sun intensity (100 mW cm−2), the sample is bent ~90° within ~0.67 s and reverts back to the relaxed (that is, flat) state in ~0.87 s after the light is turned on and off, respectively. By using a high-speed video camera (1,200 frames per second), the bending angle of the actuator is captured and plotted as a function of time for different illumination intensities (Fig. 1d).
The bending and unbending processes can both be fitted with an exponential response using equations (1) and (2):
where θ0 is the maximum bending angle, t is time and τ is the actuation response time constant. The actuation response time constant is extracted to be ~0.50 s for both bending and unbending, which is significantly faster than the azobenzene-based polychromic materials with a response time of ~10 s12. The fast response is attributed to the low heat capacity30, high thermal conductivity (Supplementary Fig. S3)31 and the excellent near-infrared light absorption of the SWNT thin film32, making them ideal photothermal material.
Owing to the superb optical absorbance properties of SWNTs, the PC/SWNT photothermal actuator is highly sensitive to light irradiation. Figure 1e exhibits the maximum bending angle as a function of the light intensity; an easily detectable bending angle of ~10° is found at 10 mW cm−2 (0.1 sun). The bending angle starts to saturate at ~90° when the illumination intensity is >80 mW cm−2 (0.8 sun). Interestingly, further increase of the intensity causes the structure to oscillate around its saturation bending angle (90°) due to the shadowing effect. Specifically, as the bending angle becomes slightly larger than 90°, part of the SWNT film becomes blocked from light irradiation due to self-shadowing, hence driving the oscillation process. This phenomenon is depicted in the Supplementary Movie 1, where an oscillation frequency of ~5 Hz is observed for continuous 1.2-sun illumination.
Photothermal actuation mechanism
To elucidate the underlying photothermal mechanism of the PC/SWNT bilayers, we used an infrared camera to measure the real-time temperature change of the sample upon light irradiation (see Methods for details of the set-up). Figure 2a shows the temperature profile of a PC/SWNT bilayer film (10 μm/1 μm) when the light is on and off. It is evident that the temperature of the substrate is increased by ~20 °C under 1-sun illumination. In contrast, no observable temperature change is found in the PC film without SWNTs (Fig. 2b). Figure 2c shows the temperature of a PC/SWNT bilayer as a function of exposure time to light with various illumination intensities. Rapid temperature rise and decay are clearly observed. A thermal time constant (corresponding to 63% drop in temperature) of ~0.60 s is extracted similar to Fig. 1d. This extracted thermal time constant is close to the actuation response time constant (Fig. 1d), which confirms the underlying photothermal actuation mechanism. As shown in Fig. 2d, the maximum temperature change and light intensity show near-linear dependency. The comparison between Figs 1e and 2d indicates that a 5°C change in the temperature (corresponding to 20 mW cm−2 illumination) results in a bending angle of ~20°, depicting the high sensitivity of the system. The photothermal effect of PC/SWNT bilayers with various SWNT layer thicknesses was also investigated and summarized in Supplementary Table S1. We also carried out control experiments inside an oven to induce pure thermal actuation. The bending angle measurements from these control experiments are consistent with the photoactuation experiments for the same temperature change as shown in Supplementary Fig. S4 and Supplementary Table S2.
Next, we focus on understanding the time-limiting step in the actuation of our bilayers by calculating the thermal time constant of both SWNT and PC films (Supplementary Note 1). First, we estimated the average heat transfer coefficient of free air convection of the two surfaces of PC/SWNT from the equilibrium temperature change under solar light irradiation according to the following equation: 2hΔT=Win. Here, h is the average heat transfer coefficient, ΔT is the equilibrium temperature change and Win is the power density of solar irradiation. The estimated heat transfer coefficient is 20.6 W m−2 K−1. The thermal time constant is then calculated according to τ=ρCb/h, where ρ is mass density of the film; C is the specific heat; b is the thickness of the film. The calculated thermal time constants of the SWNT and PC films are 0.04 and 0.7 s, respectively. Clearly, the heat capacity in the PC layer dominates the response time with the calculated value matching the experiments well, suggesting that the proposed operation mechanism is indeed viable (Fig. 2c).
Mechanical modelling was performed to quantitatively study the effect of SWNT film thickness and the maximum temperature change on the static maximum bending angle (Fig. 3). The sample receives non-uniform illumination due to mechanical curling of the actuator (Fig. 3a). Based on the bimetal thermostat equation of Timoshenko33, we developed an analytical model for the bending angle with non-uniform light irradiation (Supplementary Note 2). From modelling, the effect of SWNT film thickness (PC thickness of 10 μm) on the maximum bending angle for a given illumination intensity is calculated. The modelling matches the experimental results well (Fig. 3b). The maximum deflection increases with SWNT film thickness up to ~1 μm, beyond which further increase in the SWNT thickness has minimal effect. The results show that a high degree of control in the dynamic range of our bilayer actuators can be obtained by simply tuning the thickness of the SWNT film as compared with that of the PC substrate. The conversion efficiency of our actuators (defined as the generated elastic energy due to photoactuation divided by the incident light energy) is estimated to be ~0.01% (Supplementary Note 3). It is noted that this energy conversion efficiency is for doing internal work on deforming the bilayer rather than for doing external work.
User-defined, wavelength-selective response
A unique feature of the PC/SWNT photothermal actuators is the tunability of the responsive wavelength range by using nanotubes with different chirality distributions. It is known that the light absorption characteristics of carbon nanotubes are determined by their chiralities26. To demonstrate this feature, in addition to using as-synthesized HiPCO tubes with a mixture of chiralities, we used 98% purity metallic nanotubes (as-received from NanoIntegris) with M11 absorption peak at ~700 nm (average nanotube diameter of 1.4 nm), and (6,5) single-chirality nanotubes prepared as previously described24 (purity>97%) with S22 and S11 absorption peaks at ~560 nm and 970 nm, respectively (Fig. 4a,b). For the light-actuation experiments, three illumination wavelength bands of 600–800 nm, 850–1,050 nm and 1,050–1,250 nm were created by using a combination of long- and short-pass optical filters. The power of the light source was calibrated to maintain the same transmitted power for all three wavelength bands. As expected, HiPCO nanotubes are responsive to all three wavelength bands (Fig. 4c). In contrast, the actuators with metal-enriched nanotubes are only responsive to the visible wavelength band of 600~800 nm. On the other hand, actuators with single-chirality (6,5) nanotubes only respond to the 850–1,050 nm band. The wavelength-dependent response is also evident from the photothermal measurements (Supplementary Fig. S5). This feature represents a useful and unique aspect of the actuators that takes advantage of the intriguing optical properties of nanotubes.
Finally, we focus on the use of PC/SWNT actuators for practical applications. In one example, we demonstrate their use for ‘smart’ curtains that can be engineered to be either closed or opened upon sunlight illumination (Fig. 5). Here, circular PC/SWNT bilayers are mounted on a surface by their top edge only. Two types of bilayers based on HiPCO nanotubes are utilized (Fig. 5a). One involving the configuration discussed above, which curls up (that is, opens) on light illumination (Type A). The other operates in the reverse mode—that is being curled open in the absence of light and closing (that is, moving to the flat state) on light illumination (Type B). To fabricate Type B actuators, PC/SWNT bilayers are pre-strained at 70 °C for 12 h to make them curled to the PC side. By arraying the circular actuators on a stage with each actuator being mounted by the top edge, a curtain is obtained that either closes (Type B) or opens (Type A) by light illumination (Fig. 5b,c, and Supplementary Movie 2). Besides energy-efficient windows, this smart curtain may be potentially useful for camouflage applications.
Motors and oscillators
As a second application demonstration of PC/SWNT actuators, we have fabricated a 2-cm-sized motor, which rolls away from the direction of light illumination. The motor is fabricated by assembling three pieces of rectangular (2 cm × 2.5 cm) PC/SWNT (25 μm/1 μm) film together into a cylinder with the SWNT side facing outwards. As illustrated in Fig. 6a,b, non-uniform illumination on the motor from an angled light source causes the curvature to decrease on the light-facing side, that is, the location that gets more illumination has the tendency to be flattened. This causes a change to the centre of mass of the motor, thereby resulting in a torque that drives the motor away from light on a flat surface at a speed of ~6 cm s−1 (Fig. 6c and Supplementary Movie 3). On the other hand, an oscillating wheel is made by making a roller with elliptical cross-section. In this case, the structure leans forward and backward at a frequency of ~2 Hz on light illumination (Supplementary Movie 4). These demonstrations illustrate macro-scale motors with fast mechanical motion driven by a single light source, which can only be realized with fast and reversible light-responsive materials. As cyclic lifetime is critically important for practical use, we have measured 60,000 cycles of actuation test on a PC/SWNT bilayer. The deformation remains unchanged as shown in Supplementary Fig. S6 and Supplementary Movie 5.
In summary, PC/SWNT bilayer photoactuators with highly unique light-responsive properties were fabricated using a facile and low-cost room-temperature process. The PC/SWNT bilayers simultaneously offer fast response, extreme light sensitivity, large deflection and reversible actuation. By using SWNTs with different chirality distributions, the responsive wavelength range of the actuators is readily programmed, enabling the development of chromic actuators. As a benchmark for fast and reversible light-responsive properties, a smart curtain and a fast-moving motor have been demonstrated to highlight two representative applications of the proposed bilayers. Moving forward, the bilayer actuators can be optimized in terms of SWNT and polymer thickness, and polymer Young’s modulus to achieve larger force output, depending on the application needs. By exploiting nanotube-printing strategies on polymer substrates, this work can be extended in the future to the fabrication of complex, reconfigurable structures using a scalable process scheme.
PC/SWNT bilayer fabrication
Purified HiPCO SWNT powder is purchased from NanoIntegris Inc. (residual Fe catalyst <15 wt%, diameter 0.8–1.2 nm, length 100–1,000 nm). A 0.5-mg ml−1 aqueous solution of SWNTs is made using 2% sodium deoxycholate as surfactant. After 400 min of sonication (Crest Ultrasonics 275DA; power 9), large SWNT aggregates, non-SWNT carbonaceous impurities, and metal catalyst particles were removed by centrifuging the SWNT dispersion for 10 min with 13,000g rotation speed. Vacuum filtration is performed using a standard 25-mm set up with a PC membrane (Millipore, 0.4-μm pore size, 25 mm diameter). After filtration, 20 ml water is added to rinse away the surfactant. A similar fabrication process is used to obtain actuators with metallic and (6,5)-enriched nanotubes (with a concentration of ~0.01 mg ml−1). All three actuators have the same SWNT film thickness of ~1 μm by controlling the amount of SWNTs used for the filtration.
Temperature measurements of the PC/SWNT bilayers
For the infrared camera measurements, the entire edge of the sample is fixed onto a piece of cardboard with a 20-mm hole so that the sample is mostly suspended in air and thermally well insulated. The temperature of the SWNT film surface is measured by an infrared camera. The camera is 25 mm away from the sample with 30° detection angle with respect to the surface normal of the sample.
How to cite this article: Zhang, X. et al. Photoactuators and motors based on carbon nanotubes with selective chirality distributions. Nat. Commun. 5:2983 doi: 10.1038/ncomms3983 (2014).
Stuart, M. A. C. et al. Emerging applications of stimuli-responsive polymer materials. Nat. Mater. 9, 101–113 (2010).
Yerushalmi, R., Scherz, A., van der Boom, M. E. & Kraatz, H. B. Stimuli responsive materials: new avenues toward smart organic devices. J. Mater. Chem. 15, 4480–4487 (2005).
Otsuka, K. & Ren, X. Physical metallurgy of Ti-Ni-based shape memory alloys. Prog. Mater. Sci. 50, 511–678 (2005).
Schild, H. G. Poly (N-isopropylacrylamide)-experiment, theory and application. Prog. Polym. Sci. 17, 163–249 (1992).
Ilievski, F. et al. Soft robotics for chemists. Angew. Chem. Int. Ed. 50, 1890–1895 (2011).
Brochu, P. & Pei, Q. B. Advances in dielectric elastomers for actuators and artificial muscles. Macromol. Rapid Commun. 31, 10–36 (2010).
Halsey, T. C. Electrorheological fluids. Science 258, 761–766 (1992).
Lendlein, A. & Kelch, S. Shape-memory polymers. Angew. Chem. Int. Ed. 41, 2034–2057 (2002).
Liang, J. J. et al. Infrared-triggered actuators from graphene-based nanocomposites. J. Phys. Chem. C 113, 9921–9927 (2009).
Park, S., An, J., Suk, J. W. & Ruoff, R. S. Graphene-based actuators. Small 6, 210–212 (2010).
Gracias, D. H. et al. Fabrication of micrometer-scale, patterned polyhedra by self-assembly. Adv. Mater. 14, 235–238 (2002).
Yu, Y. L., Nakano, M. & Ikeda, T. Directed bending of a polymer film by light. Nature 425, 145–145 (2003).
Balzani, V. et al. Autonomous artificial nanomotor powered by sunlight. Proc. Natl Acad. Sci. USA 103, 1178–1183 (2006).
Kobatake, S. et al. Rapid and reversible shape changes of molecular crystals on photoirradiation. Nature 446, 778–781 (2007).
Zhang, X. B. et al. Optically- and thermally-responsive programmable materials based on carbon nanotube-hydrogel polymer composites. Nano. Lett. 11, 3239–3244 (2011).
Yu, C. J. et al. Electronically programmable, reversible shape change in two- and three-dimensional hydrogel structures. Adv. Mater. 25, 1541–1546 (2013).
Li, Y. B., He, Y. N., Tong, X. L. & Wang, X. G. Photoinduced deformation of amphiphilic azo polymer colloidal spheres. J. Am. Chem. Soc. 127, 2402–2403 (2005).
Yu, H. F. & Ikeda, T. Photocontrollable liquid-crystalline actuators. Adv. Mater. 23, 2149–2180 (2011).
Levitsky, I. A., Kanelos, P. T., Woodbury, D. S. & Euler, W. B. Photoactuation from a carbon nanotube−nafion bilayer composite. J. Phys. Chem. B 110, 9421–9425 (2006).
Ahir, S. V. & Terentjev, E. M. Photomechanical actuation in polymer-nanotube composites. Nat. Mater. 4, 491–495 (2005).
Lu, S. & Panchapakesan, B. Nanotube micro-optomechanical actuators. Appl. Phys. Lett. 88, 253107 (2006).
Kam, N. W. S., O'Connell, M., Wisdom, J. A. & Dai, H. J. Carbon nanotubes as multifunctional biological transporters and near-infrared agents for selective cancer cell destruction. Proc. Natl Acad. Sci. USA 102, 11600–11605 (2005).
Tu, X. M., Manohar, S., Jagota, A. & Zheng, M. DNA sequence motifs for structure-specific recognition and separation of carbon nanotubes. Nature 460, 250–253 (2009).
Green, A. A. & Hersam, M. C. Nearly single-chirality single-walled carbon nanotubes produced via orthogonal iterative density gradient ultracentrifugation. Adv. Mater. 23, 2185–2190 (2011).
Ghosh, S., Bachilo, S. M. & Weisman, R. B. Advanced sorting of single-walled carbon nanotubes by nonlinear density-gradient ultracentrifugation. Nat. Nanotechnol. 5, 443–450 (2010).
Bachilo, S. M. et al. Structure-assigned optical spectra of single-walled carbon nanotubes. Science 298, 2361–2366 (2002).
Choy, C. L. et al. Thermal conductivity and thermal expansivity of in situ composites of a liquid crystalline polymer and polycarbonate. Polym. Eng. Sci. 36, 827–834 (1996).
Jiang, H., Liu, B., Huang, Y. & Hwang, K. C. Thermal expansion of single wall carbon nanotubes. J. Eng. Mater. Technol. 126, 265–270 (2004).
Nikolaev, P. et al. Gas-phase catalytic growth of single-walled carbon nanotubes from carbon monoxide. Chem. Phys. Lett. 313, 91–97 (1999).
Ruan, W. Z., Wang, Z. Y., Li, Y. C. & Liu, L. T. In-situ heat capacity measurement of carbon nanotubes using suspended microstructure-based microcalorimetry. IEEE Trans. Nanotechnol. 11, 367–373 (2012).
Fujii, M. et al. Measuring the thermal conductivity of a single carbon nanotube. Phys. Rev. Lett. 95, 065502 (2005).
Barone, P. W., Baik, S., Heller, D. A. & Strano, M. S. Near-infrared optical sensors based on single-walled carbon nanotubes. Nat. Mater. 4, 86–92 (2005).
Timoshenko, S. Analysis of bi-metal thermostats. J. Opt. Soc. Am. 11, 233–255 (1925).
We thank A. Majumdar for supporting the thermal conductivity measurements. This work was supported by the NSF Center of Integrated Nanomechanical Systems. Wavelength-dependent measurements were performed in the Electronic Materials Program, LBNL, which is supported by the Director, Office of Science, Office Basic Energy Sciences, Division of Materials Sciences and Engineering, of the US Department of Energy under Contract No. DE-AC02-05CH11231. A.D.B and R.S.F. acknowledge Darpa M3 funding. M.C.H. acknowledges funding from the National Science Foundation (DMR-1006391).
The authors declare no competing financial interests.
Supplementary Figures S1-S6, Supplementary Tables S1-S2, Supplementary Note 1-3 and Supplementary References (PDF 871 kb)
Light-Driven Resonator - Light induced oscillation of a PC/SWNT bilayer under continuous 1.2 Sun illumination. Light is being illuminated from the left side. (MOV 2953 kb)
Smart Curtain - Array of PC/SWNT bilayers hexagonally arranged on a blue cardboard. Two types of bilayers are used. Type A is closed (i.e., flat) when light is off and open (i.e., curled) when light is on. Type B operates in the reverse mode. The region under each actuator is marked yellow for visual clarity. Simulated 1-sun is being turned on and off (MOV 14287 kb)
Light Driven Motor - A light driven motor made from a PC/SWNT bilayer rolled into a tubular structure, moving at a speed of ~6cm/sec away from illuminated light (halogen light source). (MOV 2647 kb)
Light Driven Oscillating Wheel - A light driven oscillating wheel made from a PC/SWNT bilayer rolled into an asymmetric tubular structure. Continuous light (halogen light source) is being illuminated from the right side (MOV 4267 kb)
Light Driven Butterfly Actuator - A light driven butterfly actuator tested for 1200 cycles (20× faster than real time). (MOV 4717 kb)
About this article
Cite this article
Zhang, X., Yu, Z., Wang, C. et al. Photoactuators and motors based on carbon nanotubes with selective chirality distributions. Nat Commun 5, 2983 (2014). https://doi.org/10.1038/ncomms3983
Nature Communications (2022)
Journal of Nanostructure in Chemistry (2022)
Light-activated shape morphing and light-tracking materials using biopolymer-based programmable photonic nanostructures
Nature Communications (2021)
Carbon nanotube–mediated antibody-free suspension array for determination of typical endocrine-disrupting chemicals
Microchimica Acta (2020)
Journal of Materials Science (2020)