In the rapidly growing field of spintronics, simultaneous control of electronic and magnetic properties is essential, and the perspective of building novel phases is directly linked to the control of tuning parameters, for example, thickness and doping. Looking at the relevant effects in interface-driven spintronics, the reduced symmetry at a surface and interface corresponds to a severe modification of the overlap of electron orbitals, that is, to a change of electron hybridization. Here we report a chemically and magnetically sensitive depth-dependent analysis of two paradigmatic systems, namely La1−xSrxMnO3 and (Ga,Mn)As. Supported by cluster calculations, we find a crossover between surface and bulk in the electron hybridization/correlation and we identify a spectroscopic fingerprint of bulk metallic character and ferromagnetism versus depth. The critical thickness and the gradient of hybridization are measured, setting an intrinsic limit of 3 and 10 unit cells from the surface, respectively, for (Ga,Mn)As and La1−xSrxMnO3, for fully restoring bulk properties.
The effectiveness of electron hybridization in solids and its competition with Coulomb interactions plays a fundamental role in novel physical phenomena, often termed as quantum properties1,2. In the context of spintronics, magnetic and electronic reconstructions at interfaces have been often reported, with their origin lying in the delicate interplay between charge, spin and orbital degrees of freedom1,2,3,4,5. Looking at the strength of electron hybridization and localization, near a surface or interface the reduced translational symmetry breaks or severely alters the electronic properties with important consequences for, for example, the magnetic order parameter, transition temperature and metallic/insulator character, thus potentially limiting the achievement of the desired performance in interface-based devices6,7,8. Moreover, surface- and defect states play critical roles in mediating ferromagnetism, due to the modified chemistry of the first top layers.
Prototypical spintronics systems displaying such effects are the rare-earth-doped manganites, in particular metallic La1−xSrxMnO3 (LSMO), and the most representative diluted magnetic semiconductor, (Ga,Mn)As. In both systems, the relationship between electronic reconstruction and magnetic properties and the competition between electron localization and hybridization are relevant ingredients in determining their Curie temperature (TC) and ferromagnetic state5,6,7,8,9,10,11,12. In LSMO, the mechanism and the reason for the modified electronic properties of the surface region are still open questions; in (Ga,Mn)As a carrier depletion zone up to 1 nm has been found in the vicinity of the surface, with modified ferromagnetic order11. Moreover, a remarkable example of altered electronic properties has been reported in the so-called magnetic ‘dead layer’ at the surface of otherwise ferromagnetic bulk systems13,14,15,16,17.
To date, bulk sensitive techniques, exploiting the combination of aberration-corrected transmission electron microscopy and electron energy loss spectroscopy was recently able to quantify the role of the charge-transfer screening length at the interface LSMO/PZT (lead zirconate titanate)17, and revealed interfacial electronic reconstruction and a change in TC near the metal–insulator transition in both LSMO/STO and (Ga,Mn)As/GaAs (refs 11, 18). Furthermore, surface-sensitive tools, such as angular resolved photoemission spectroscopy (PES) and scanning probes, gave clear indications of a negligible coherent spectral weight at the Fermi level in bilayer LSMO crystals, with a more fragile metallic and magnetic character at the surface than in the bulk16,19.
Although general agreement has been reached on the observation that both metallicity and ferromagnetism of these systems are reduced at the surface, the determination of the crossover between surface and bulk properties, that is, what the ‘critical’ thickness of such an effect is, and whether the crossover is smooth or abrupt, needs a more complete, and preferably quantitative, description, with particular attention to the modification of the bulk electronic properties when approaching the surface.
Here we report results obtained on thin films of metallic LSMO (with x=0.33 and x=0.35) and of (Ga,Mn)As (with Mn doping between 8 and 13%) using core-level X-ray PES. The large tuneability of the photon energy offered by synchrotron radiation is exploited to significantly vary the information depth from the surface region (<10 Å, corresponding to a few atomic layers) down to the bulk (>100 Å; refs 20, 21). We provide direct and quantitative information of the evolution from metallic (bulk) to insulating (surface) character of these materials, together with a clear indication of the behaviour of hybridization/localization of the bulk electronic states upon both doping and depth. Core-level photoemission in the hard X-ray regime (hard X-ray photoelectron spectroscopy (HAXPES), with hv>2 keV) supported by model calculations provides an element-specific spectroscopic fingerprint of the electron hybridization. Distinctly different electron-screening channels exist at the surface and in the bulk, with the bulk one severely suppressed near the surface, where a stronger localization is found. Moreover, the bulk-like metallicity gradually decreases across a thickness of almost 10 unit cells (u.c.) and more than 2 u.c. (for LSMO and (Ga,Mn)As, respectively), eventually disappearing at the surface. Our findings not only deepen the comprehension of interface physics but also have a direct impact on tailor-made functionalities in new devices.
Variable depth information via PES
Thin films of LSMO (doping value x=0.33 and x=0.35, grown on LSAT(100) and SrTiO3(100)) and of (Ga,Mn)As (Mn doping between 8 and 13%, grown on GaAs(100)) were measured. Figure 1 shows the Mn 2p core-level spectra measured for (Ga,Mn)As (panels a and b) and LSMO (panels f and g) epitaxial films, as a function of increasing photon energy, that is, with increasing probing depth20,21. The lattice structures are sketched in Fig. 1 e,j, together with the depth information accessible versus photon energy. Details of growth and characterization can be found in the Methods section and Supplementary Information. Additional low binding energy (BE) features, labelled as well-screened satellites, are clearly observed for both spin–orbit partners when entering the regime of HAXPES, in agreement with previous reports22,23,24,25. Such features are severely reduced or absent at the lower photon energies, that is, for enhanced surface sensitivity, as highlighted in panels b and g, where the evolution of the intensity of the low-BE satellites versus photon energy is quantified by a line shape analysis (Supplementary Fig. 13). It is important to emphasize that the critical depth at which the satellite intensity appears is much larger for LSMO compared to (Ga,Mn)As, although results are obtained for the same element, Mn, and minimal differences in surface roughness are found (Supplementary Figs 10–12). We observe that the energy separation between the well-screened satellites and the main peak varies versus photon energy, as highlighted by red thick marks. We further note that in both systems the intensity increase of the low-BE satellites is gradual, with no indication of a sharp transition.
Quantifying hybridization/localization of electronic states
The term well-screened for the low-BE features seen in Fig. 1 is strictly linked to the screening of electrons after a core hole is created in the photoemission process. A sketch of the energy levels of ground and final states is presented in panels a and c of Fig. 2 for (Ga,Mn)As and LSMO, respectively. The BE of each possible final state depends on how effective the core hole is screened by the valence electrons, and taking into account the hybridization V between valence and conduction electrons, a state can be pulled down in energy by an amount Q due to the core–valence Coulomb interaction. In this condition, the core–hole potential creates an excitonic state with a hole in the 3d band. In the well-screened state a valence electron, via hybridization V, fills this hole; in the poorly screened state, this hole stays empty.
A theoretical understanding of the satellites features in core levels of strongly correlated systems dates back several decades starting from observations in 4d- and 4f-based materials26,27,28, followed by more general models for 3d transition metals29,30. More recently, well-screened satellites have been reported as bulk-only features in core-level HAXPES spectra of 3d transition metal oxides (vanadates, manganites) and magnetic diluted systems22,23,24,25,31,32. Following these results, improved theoretical approaches have been presented, based on multisite cluster model, Anderson impurity model and effective coupling at the Fermi level24,33,34,35. By quantifying the variation of the hybridization parameter, the here-performed model calculations provide evidence of the link between the satellites and the metallic/insulating character of the system. Calculated spectra are shown in Fig. 1 for (Ga,Mn)As (panels c,d) and LSMO (panels h,i).
Comparison with calculations in Mn-doped GaAs
Photoemission spectra for the transitions 3dn→2p53dn in (Ga,Mn)As are calculated using an Anderson impurity model, taking into account configuration interaction in the initial and final states33. A scheme of the initial- and final-state configuration is presented in the insets of Fig. 2. In the calculation, Δ=E(d6L)−E(d5) is the ligand-to-3d charge-transfer energy, U is the 3d–3d Coulomb energy and Q is the 2p–3d Coulomb energy (we will omit L in the notation, as there presence is clear from charge neutrality). The configurations are mixed by hybridization, which is described by a parameter V (see Methods). The Δ, U and Q values give the relative energies of the average configuration as E(3d4)=−Δ+U=3 eV, E(3d5)=0 eV and E(3d6)=Δ=1 eV, and for the final state as E(2p53d4)=−Δ+U+Q=8 eV, E(2p53d5)=0 eV and E(2p53d6)=Δ−Q=−4 eV. This means that, while the ground state has primarily d5 character, the lowest final state has mainly d6 character. The final state 2p53d6 is pulled down below 2p53d5 by an energy ∼Q. Thus, the order of the energy levels 3d5 and 3d6 is reversed in the final state, which means that the 2p53d5 is a poorly screened state and the 2p53d6 a well-screened state with an extra d-electron. Here we adopt values Δ=1 eV, U=4 eV, Q=5 eV similar as for (resonant) PES36,37,38 and X-ray absorption spectroscopy39 of (Ga,Mn)As, In Fig. 1c one observes that a good agreement with the ‘bulk’ spectrum (orange curve in Fig. 1a) is obtained with Δ=1 eV, U=4 eV, Q=5 eV and V=2.5 eV, confirming the coexistence of localized and itinerant electrons in the bulk. The low-energy PES spectrum, representative of the more-localized surface region, is well reproduced with V=1.5. Overall, a good agreement is found between experiment and calculation concerning the change of intensity and the relative position of satellite and main peak. The main difference with the experiment is that the calculation overestimates the intensity of the poorly screened peak. This is because the model does not include all possible additional screening channels, which can take away intensity from the screened peak, smearing out the calculated leading peak.
Comparison with calculations in LSMO
The Mn 2p HAXPES spectra were calculated within the extended configuration interaction model, described in previous lines of work24,34. As basis states, configurations 3d4, 3d5L and 3d5C were used. The 3d5C represents the charge transfer (CT) between Mn 3d and the doping-induced coherent state at EF, labelled C. An effective coupling parameter V* for describing the interaction strength between the Mn 3d and coherent state is introduced, analogous to the Mn 3d-O 2p hybridization V. Two parameters are varied: the CT energy between Mn 3d and the new C states (Δ*) and the hybridization between Mn 3d and coherent states (V*). Except for these two parameters, all other parameter values are fixed. In Fig. 1h calculated spectra for three different hybridization values V* are shown. Both the low-energy feature around 640 eV BE and a broad shoulder appearing at 644 eV with large probing depth are well reproduced by the calculations. The well-screened peak in the calculation is analysed to originate from the 2p53d5C configuration of the final state, and increases in intensity with increasing V*.
The evolution of satellite peaks in LSMO is qualitatively similar yet quantitatively different with respect to (Ga,Mn)As: a sizeable intensity of the low-BE feature in LSMO is found at much larger depth, as indicated in Fig. 1e,k. It is important to underline that the well-screened peaks correspond to the lowest-energy state. Compared to the higher-energy states, this low-energy state is less mixed with other states, which means their linewidth should be narrower. This characteristic is confirmed convincingly by the experimental results.
A further confirmation that the well-screened peak is a spectroscopic fingerprint of electron hybridization, that is, a measure of the truly bulk metallic character, is found from the comparison between the experimental data and theoretical predictions regarding the energy separation between main peak and satellite peak. In (Ga,Mn)As (Figs 1b,d and 2a), the theoretical description correctly explains the strong decrease in the energy separation for the main-to-satellite peak (red marks in Fig. 2d) going from V=1.0 eV (surface) to V=2.5 eV (bulk), with a larger discrepancy towards the surface limit. Although a good agreement is found between experiment and theory, theoretical data overestimate the energy separation in the range 1<V<2 eV. Calculations show that the poorly screened peak consists in fact of more than one peak. In the experimental results we plot the energy distance to the broad main peak because the experiment cannot resolve the fine structure as theory does (see Supplementary Information). The same general agreement is also found in LSMO (Figs 1g,j and 2b) with an overall trend for increasing the energy separation between peaks when the hybridization V* increases. The separation between well-screened peak (2p53d5C) and main peak (2p53d5L) peaks increases with Δ* and with the hybridization V* between 3d4 and 3d5C configurations. The strength of hybridization V* also influences their relative intensities. Basically, the smaller value of Δ* forms a peak at much lower BE side. Previous reports for metallic LSMO show that the separation between the main peak and the well-screened feature increases with hole-doping until x=0.4, and reduces for x=0.55 (ref. 22). In addition, this behaviour matches well with the metallic/magnetic character owing to the fact that, following the phase diagram, hole-doping with increasing x produces a ferromagnetic phase in LSMO with larger TC and lower resistivity up to x=0.4 (refs 22, 40). Consistent with the decrease of the well-screened feature at low photon energies (Fig. 1f,g), a smaller peak separation suggests a smaller effective hole-doping and a lower metallicity at the surface. It is important to underline that the observed evolution of the energy separation not only confirms the validity of our approach but could also be used as a signature of the competition between localized and delocalized electronic character.
Critical thickness of electronic hybridization
Having ascertained that the presence and the evolution of the well-screened peaks are spectroscopic fingerprints of the electronic hybridization, we now deepen our analysis to a more quantitative aspect. Following the results of Figs 1 and 2, the attenuation of the low-BE satellites versus probing depth can be modelled by a fitting procedure described in the Supplementary Fig. 3 displays the value of the inelastic mean free path (IMFP) λIMFP at different photon energies versus the ratio between the area of the satellite peak and the total area of the Mn 2p3/2 spectrum. Here λIMFP was obtained from the TPP-2M formula for (Ga,Mn)As and LSMO21,41. The curves through the points in Fig. 3 are the best fits to the data of an exponential attenuation function of the form I(λ)=A exp (−B/λ), where A indicates the contribution of the satellite to the total area of the spectrum and B represents the thickness of a surface layer where the screening channel associated to the extra peak is considered as totally absent, that is, a layer fully attenuating the intensity of the satellite present in the bulk. This simple model describes the attenuation of the bulk electronic hybridization when going towards the surface of the solids; hence, the thickness B is a measure of the spatial extension of the modified electronic properties or, more precisely, the depth at which both hybridization and metallicity start to be modified with respect to their bulk values. A sketch of the solids with these two critical thicknesses is presented on the right (GaMnAs) and left (LSMO) sides of Fig. 3. We obtain a value of (12±1) Å for (Ga,Mn)As and (40±2) Å for LSMO, corresponding to more than 2 and almost 10 u.c., respectively. These values should be compared with the 10 Å-thick Mn depletion reported in (Ga,Mn)As (ref. 11), and with X-ray magnetic spectroscopy and transport results on thin LSMO films, where altered ferromagnetism and metallicity have been observed up to 30 Å of thickness from the surface42,43,44,45,46.
Strain and temperature dependence
Strain-driven interface engineering is a relevant issue for spintronic heterostructure, and recent results have shown that the symmetry breaking induced by lattice strain influences the electron occupancy of the out-of-plane orbitals in the topmost surface layer47. To investigate the effect of strain on our findings, we have measured the critical thickness of bulk metallic screening using the same method of Fig. 3, on LSMO films (100 u.c. thick each) epitaxially grown on (001)-oriented SrTiO3 (STO) and on SrLaAlO4 (SLAO) substrates, producing, respectively, 1% tensile strain and 3% compressive strain (Supplementary Figs 1–8).
As shown in Fig. 4e, strained and unstrained films display the same main spectral features, with the exception of LSMO grown on SLAO, where a slightly broader satellite is observed. Such difference is attributed to the lower Curie temperature of strained films, as explained in the next section. The critical screening thickess obtained from the application of the fitting procedure is 41±7 Å in LSMO/SLAO, while no difference within error bars is found between the tensile-strained LSMO/STO films and the unstrained ones grown on LSAT. These results show that, although sensitive to the change of electronic hybridization across the entire thickness of the film, core-level photoemission does not provide a direct probe of orbital occupancy and/or symmetry breaking at the surface as the X-ray absorption technique used in ref. 47, suggesting that the evolution of the bulk metallic screening across the thickness of the sample could be attributed to dimensionality effects.
We now turn to the influence of temperature on the magnetic properties. Chemical sensitive magnetic information can be obtained by detecting the Mn 2p core-level spectra using left- and-right circularly polarized X-rays (magnetic circular dichroism in HAXPES), as shown in panel a Fig. 4a for (Ga,Mn)As and panel c for LSMO, respectively. A large difference, the magnetic circular dichroism, is observed with the well-known down-up (2p3/2), up-down (2p1/2) line shape32,48,49. It is important to emphasize that, in both systems, the largest magnetic signal is observed at the energy position of the well-screened satellites, confirming the major role of delocalized electrons in establishing the mechanism of ferromagnetism12,23,24,32. Furthermore, Fig. 4b,d shows that the temperature also influences the relative intensities of the well-screened and poorly screened peaks. In (Ga,Mn)As, a clear change in the relative intensity of the main and satellite peaks is visible when crossing TC=70 K, as previously reported23. As for LSMO, the inset of panel d reveals a fine structure of the well-screened satellites, where: (i) a weak shoulder persists above TC (345 K), corresponding to a multiplet structure not directly linked to ferromagnetic properties and (ii) a large decrease of spectral weight is observed, connected to the change of the magnetic order parameter, confirming previous results on La1−xBaxMnO3 (ref. 50). In this regime of doping, the bilayered manganites have a concomitant metal–insulator and ferromagnetic–paramagnetic transition as a function of temperature and the well-screened satellite disappears above TC (ref. 25). It should be noted that the decrease of the well-screened satellite intensity follows a bulk-like behaviour and does not display the well-known rapid decrease usually observed in surface-sensitive results51. Although the largest dichroism, corresponding to the presence of a long-range magnetization, is observed where delocalized states are, a contribution to magnetism is also arising from the rest of the spectrum, that is, localized or poorly screened part. This further corroborates the fact that the magnetism is reduced in absence of the extra-peak screening channel, although not suppressed.
We provide clear evidence from the study of two paradigmatic spintronics materials that the electronic hybridization strength varies significantly from its bulk value when approaching the surface layers. The dimensionally dependent role of (de)localized electrons is revealed, affecting both the ferromagnetic and metallic behaviour. Concerning the spatial extension of the altered electronic properties, the interplay between carrier localization and metallicity in (Ga,Mn)As is restricted to the near-surface region (∼10 Å) in agreement with the observed loss of long-range magnetization and Mn depletion leading to a superparamagnetic-like response11. As for LSMO, previous reports suggested the existence of decoupled magnetic and metallic critical thicknesses due to localization effects in thin films, with a larger extension (up to 30 Å) of the metallic thickness42,44,52,53,54. Our results corroborate this hypothesis, giving a quantitative estimate of the crossover thickness range for a film to fully develop bulk-like hybridization values. It is important to emphasize that the spectroscopic fingerprints we have used and modelled are representative of a bulk-only character: the strong attenuation of the well-screened feature measured close to the surface is directly connected to an altered metallicity, yet not suggesting that this metallicity is completely suppressed. Moreover, we have shown that both localized and delocalized electrons contribute to both electronic and magnetic character, opening the perspective of a direct comparison between the critical thickness for the electronic structure with the critical thickness of the magnetic properties. Finally, our data provide evidence that a difference in the overall film properties will be always present due to the reduced dimensionality, hence due to the modified hybridization, especially when the film is not thick enough and/or at interfaces. The depth extension of the surface/interface electronic charge distribution, and its control via atomic-precision growth techniques, will conceivably open alternative routes for engineering complex heterostructures.
La0.65Sr0.35MnO3 (LSMO) thin films were grown by molecular beam epitaxy in a dedicated chamber located at the APE beamline (NFFA facility, Trieste, Italy). LSMO films of different doping and thickness have been grown. Samples used in the present report are grown on La0.18Sr0.82Al0.59Ta0.41O3 (LSAT), that is, strain relaxed, and have a thickness of 100 u.c. (≈400 Å), with the c axis oriented perpendicularly to the surface. Growth and characterization of strained films are described in Supplementary Material. The ferromagnetic (Ga,Mn)As films (Mn doping level between 6 and 13%) were grown by molecular beam epitaxy on GaAs substrates using a modified Veeco Gen II system at the University of Regensburg, Germany, with a Mn doping range between 6 and 13%. Samples measured in present report have 200 Å of thickness and 12.5% of doping, unless reported otherwise. (Ga,Mn)As films were measured as-grown, in order to avoid segregation of Mn towards the surface after post-annealing treatment. Details of structural and magnetic characterization can be found in the Supplementary Material.
Photon energy- and temperature-dependent HAXPES experiments were performed at the I09 beamline at Diamond Light Source (Didcot, UK). The beamline’s end station is equipped with a SCIENTA EW-4000 electron energy analyser, mounted with the lens axis perpendicular to the X-ray beam. A grazing incidence geometry (that is, normal photoelectron emission) has been used, that is, 3° angle between the X-ray beam and the surface plane, with an angular and energy resolution better than 0.2° and 20 meV, respectively, resulting in a 30 × 250 μm2 beam footprint on the sample. The position of the Fermi level EF and the overall energy resolution have been estimated by measuring the Fermi edge of a polycrystalline Au foil in thermal and electric contacts with the samples. The overall energy resolution (analyser+beamline) was kept below 250 meV over the entire photon energy range. Magnetic dichroism in HAXPES spectra was acquired at BL19LXU at Spring-8, Japan, equipped with a SCIENTA R4000-10 kV electron energy analyser at grazing incidence geometry (>4° angle between the X-ray beam and the surface plane) and a spotsize of 40 × 500 μm2 on the sample. The overall energy resolution (analyser+beamline) was kept below 400 meV at the selected photon energy.
(GaMn)As. Photoemission spectra for the transitions 3dn→2p53dn in (Ga,Mn)As are calculated using an Anderson impurity model, taking into account configuration interaction in the initial and final states26. The wave functions are a coherent sum over dn, dn+1L, dn+2L2,... configurations, where L denotes a hole in the ligand orbitals. The average energies of the initial and final state configurations are taken as points on a parabola, E(dn)=n(Δ−5U)+½ n(n−1)U and E(2p5dn)=E(2p5)+E(dn)−nQ, respectively, where Δ=E(d6L)−E(d5) is the ligand-to-3d charge-transfer energy, U is the 3d–3d Coulomb energy and Q is the 2p–3d Coulomb energy. The configurations are mixed by hybridization with a parameter V=<d|H|L>.
The Hamiltonians, H, for the initial and final states of the Mn atoms are calculated using Cowan’s code55, including tetrahedral crystal-field symmetry (10Dq=−0.5 eV), spin–orbit and multiplet structure but neglecting band structure dispersion. Wave functions are calculated in intermediate coupling using the atomic Hartree–Fock approximation with relativistic corrections and by reducing the Slater parameters to 80% to account for intra-atomic correlation effects. No coherent state near the Fermi level has been included. When V is larger, there will be more weight of the 3d6 configuration in the initial state, resulting in a more intense ‘satellite’ peak at ∼4 eV lower BE than the main peak, giving a d count of 5.2 and ground state of 0.3% d3, 10.0% d4, 60.8% d5, 26.5% d6 and 2.8% d7.
LSMO. A modified Anderson impurity model was used with six configurations as basis states: 3d4, 3d5L and 3d5C. The 3d5C represents the CT between Mn 3d and doping-induced coherent state at EF, labelled C. The V (Γ), Udd and −Udc are the hybridization between the TM 3d and the ligand states, the on-site repulsive Coulomb interaction between TM 3d states and the attractive core–hole potential, respectively. The standard Hamiltonian Hmult describes the intra-atomic multiplet coupling between TM 3d states and that between TM 3d and TM 2p states. The spin–orbit interactions for TM 2p and 3d states are also included. A further term V*, is introduced to account for the ‘coherent’ screening channel at the Fermi level22,40, with an effective coupling parameter accounting for interaction strength with 3d states. The CT energy for such additional state is Δ*. We used a value of U=5.1 Vh for the on-site Coulomb repulsion, Q=5.4 eV for the attractive core–hole potential, Δ*=4.5 eV for the CT energy, 10Dq=1.5 eV for the crystal field and V(eg)=2.94 eV. The reduction factors of V are Rc=0.8, Rv=0.9.
The data that support the findings of this study are available from the corresponding author on request.
How to cite this article: Pincelli, T. et al. Quantifying the critical thickness of electron hybridization in spintronics materials. Nat. Commun. 8, 16051 doi: 10.1038/ncomms16051 (2017).
Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Awschalom, D. D., Bassett, C. L., Dzurak, S. A., Hu, L. E. & Petta, R. J. Quantum spintronics: engineering and manipulating atom-like spins in semiconductors. Science 339, 1174–1179 (2013).
Pesin, D. & MacDonald, A. H. Spintronics and pseudospintronics in graphene and topological insulators. Nat. Mater. 11, 409–416 (2012).
Bibes, M. & A. Barthelemy, A. Oxide spintronics. IEEE Trans. Electron. Devices 54, 1003–1023 (2007).
Imada, M., Fujimori, A. & Tokura, Y. Metal-insulator transitions. Rev. Mod. Phys. 70, 1039 (1998).
Jungwirth, T. et al. Spin-dependent phenomena and device concepts explored in (Ga,Mn)As. Rev. Mod. Phys. 86, 855 (2014).
I. Zutic, I., J. Fabian, J. & Sarma, S. D. Spintronics: fundamentals and applications. Rev. Mod. Phys. 76, 323 (2004).
Dietl, T. & Ohno, H. Dilute ferromagnetic seminconductors: physics and spintronics structures. Rev. Mod. Phys. 86, 187 (2014).
Sato, K. et al. First principles theory of dilute magnetic semiconductors. Rev. Mod. Phys. 82, 2 (2010).
M. Dobrowolska, M. et al. Controlling the Curie temperature in (Ga,Mn)As through location of the Fermi level within the impurity band. Nat. Mater. 11, 444 (2012).
Wang, M. et al. High Curie temperatures at low compensation in the ferromagnetic semiconductor (Ga,Mn)As. Phys. Rev. B 87, 121301(R) (2013).
Sawicki, M. et al. Experimental probing of the interplay between ferromagnetism and localization in (Ga,Mn)As. Nat. Phys. 6, 22–25 (2010).
Gray, A. X. et al. Bulk electronic structure of the dilute magnetic semiconductor Ga1-xMnxAs through hard X-ray angle-resolved photoemission. Nat. Mater. 11, 957–962 (2012).
Sun, Z. et al. A local metallic state in globally insulating La1.24 Sr1.76 Mn2 O7 well above the metal-insulator transition. Nat. Phys. 3, 248–252 (2007).
Freeland, J. W. et al. Suppressed magnetization at the surfaces and interfaces of ferromagnetic metallic manganites. J. Phys. Condens. Matter 19, 315210 (2007).
R. Bertacco, R. et al. Surface electronic and magnetic properties of La2/3Sr1/3MnO3 thin films with extended metallicity above the Curie temperature. Phys. Rev. B 78, 035448 (2008).
Nascimento, V. B. et al. Surface-stabilized nonferromagnetic ordering of a layered ferromagnetic manganite. Phys. Rev. Lett. 103, 227201 (2009).
Spurgeon, S. R. et al. Polarization screening-induced magnetic phase gradients at complex oxide interfaces. Nat. Commun. 6, 6735 (2015).
Mundy, J. A. et al. Visualizing the interfacial evolution from charge compensation to metallic screening across the manganite metal-insulator transition. Nat. Commun. 5, 3464 (2014).
Massee, F. et al. Bilayer manganites reveal polarons in the midst of a metallic breakdown. Nat. Phys. 7, 978 (2011).
Sacchi, M. et al. Quantifying the effective attenuation length in high-energy photoemission experiments. Phys. Rev. B 71, 155117 (2005).
Tanuma, S., Powell, C. J. & Penn, D. R. Calculations of electron inelastic mean free paths. IX. Data for 41 elemental solids over the 50 eV to 30 keV range. Surf. Interface Anal. 43, 689–713 (2011).
Horiba, K. et al. Nature of the well screened state in hard X-ray Mn 2p core-level photoemission measurements of La1-xSrxMnO3 films. Phys. Rev. Lett. 93, 236401 (2004).
Fujii, J. et al. Identification of different electron screening behavior between the bulk and surface of (Ga,Mn)As Phys. Rev. Lett. 107, 187203 (2011).
Taguchi, M. & Panaccione, G. in Hard X-ray Photoelectron Spectroscopy (ed. J. C. Woicik) ISSN 0931-5195 (Springer, 2016).
Offi, F. et al. Bulk electronic properties of the bilayered manganite La1.2Sr1.8Mn2O7 from hard-x-ray photoemission. Phys. Rev. B 75, 014422 (2007).
Fuggle, J., Campagna, M., Zolnierek, Z., Lasser, R. & Platau, A. Observation of a relationship between core-level line shapes in photoelectron spectroscopy and the localization of screening orbitals. Phys. Rev. Lett. 45, 1597 (1980).
Gunnarsson, O. & Schonhammer, K. Photoemission from Ce compounds: exact model calculation in the limit of large degeneracy. Phys. Rev. Lett. 50, 604 (1983).
Kotani, A. & Toyozawa, Y. Optical spectra of core electrons in metals with an incomplete shell. I. analytic features. J. Phys. Soc. Jpn 35, 1073–1081 (1973).
Van der Laan, G., Westra, C., Haas, C. & Sawatzky, G. A. Satellite structure in photoelectron and Auger spectra of copper dihalides. Phys. Rev. B 23, 4369 (1981).
Van Veenendaal, M. A. & Sawatzky, G. Nonlocal screening effects in 2p x-ray photoemission spectroscopy core-level line shapes of transition metal compounds. Phys. Rev. Lett. 70, 2459 (1993).
Panaccione, G. et al. Coherent peaks and minimal probing depth in photoemission spectroscopy of Mott-Hubbard systems. Phys. Rev. Lett. 97, 116401 (2006).
Edmonds, K. W., van der Laan, G. & Panaccione, G. Electronic structure of (Ga,Mn)As seen by synchrotron radiation. Semicond. Sci. Technol. 30, 043001 (2015).
Van der Laan, G. & Taguchi, M. Valence fluctuations in thin films and the α and δ phases of Pu metal determined by 4f core-level photoemission calculations. Phys. Rev. B 82, 045114 (2010).
Taguchi, M. et al. Revisiting the valence-band and core-level photoemission spectra of NiO. Phys. Rev. Lett. 100, 206401 (2008).
Van Veenendaal, M. A. Competition between screening channels in core-level x-ray photoemission as a probe of changes in the ground-state properties of transition-metal compounds. Phys. Rev. B 74, 085118 (2006).
Okabayashi, J. et al. Core-level photoemission study of Ga1−xMnxAs. Phys. Rev. B 58, R4211 (1998).
Okabayashi, J. et al. Mn 3d partial density of states in Ga1−xMnxAs studied by resonant photoemission spectroscopy. Phys. Rev. B 59, R2486 (1999).
Rader, O. et al. Resonant photoemission of Ga 1−xMnxAs at the Mn L edge. Phys. Rev. B 69, 075202 (2004).
Edmonds, K. W. et al. Surface effects in Mn L3,2 x-ray absorption spectra from (Ga,Mn)As. Appl. Phys. Lett. 84, 4065 (2004).
Taguchi, M. et al. Bulk screening in core-level photoemission from Mott-Hubbard and charge-transfer systems. Phys. Rev. B 71, 155102 (2005).
Tougaard, S. Formalism for quantitative surface analysis by electron spectroscopy. J. Vac. Sci. Technol. A 8, 2197 (1990).
Huijben, M. et al. Critical thickness and orbital ordering in ultrathin La0.7Sr0.3MnO3 films. Phys. Rev. B 78, 094413 (2008).
Kourkoutis, L. F., Song, J. H., Hwang, H. Y. & Muller, D. A. Microscopic origins for stabilizing room-temperature ferromagnetism in ultrathin manganite layers. Proc. Natl Acad. Sci. USA 107, 11682–11685 (2010).
Verna, A. et al. Measuring magnetic profiles at manganite surfaces with monolayer resolution. J. Magn. Magn. Mater. 322, 1212 (2010).
Liao, Z. et al. Origin of the metal-insulator transition in ultrathin films of La2/3Sr1/3MnO3 . Phys. Rev. B 92, 125123 (2015).
Feng, Y. et al. Insulating phase at low temperature in ultrathin La0.8Sr0.2MnO3 films. Sci. Rep. 6, 22382 (2016).
Pesquera, D. et al. Surface symmetry breaking and strain effects on orbital occupancy in transition metal perovskite epitaxial films. Nat. Commun. 3, 1189 (2012).
van der Laan, G. Zen and the art of dichroic photoemission. J. Electron Spectrosc. Relat. Phenomen 200, 143–159 (2015).
Edmonds, K. W. et al. Magnetic linear dichroism in the angular dependence of core-level photoemission from (Ga,Mn)As using hard X rays. Phys. Rev. Lett. 107, 197601 (2011).
Ueda, S. et al. Mn 2p core-level spectra of La1−xBaxMnO3 thin films using hard x-ray photoelectron spectroscopy: relation between electronic and magnetic states. Phys. Rev. B 80, 092402 (2009).
Bertacco, R. et al. Surface electronic and magnetic properties of La2/3Sr1/3MnO3 thin films with extended metallicity above the Curie temperature. Phys. Rev. B 78, 035448 (2008).
Brey, L. Electronic phase separation in manganite-insulator interfaces. Phys. Rev. B 75, 104423 (2007).
Boschker, H. et al. High-temperature magnetic insulating phase in ultrathin La0.67Sr0.33MnO3 films. Phys. Rev. Lett. 109, 157207 (2012).
Bertinshaw, J. et al. Element-specific depth profile of magnetism and stoichiometry at the La0.67Sr0.33MnO3 /BiFeO3 interface. Phys. Rev. B 90, 041113 (2014).
Cowan, R. D. Theoretical calculation of atomic spectra using digital computers. J. Opt. Soc. Am. 58, 808 (1968).
This work has been partly performed in the framework of the nanoscience foundry and fine analysis (NFFA-MIUR Italy) facility.
The authors declare no competing financial interests.
About this article
Cite this article
Pincelli, T., Lollobrigida, V., Borgatti, F. et al. Quantifying the critical thickness of electron hybridization in spintronics materials. Nat Commun 8, 16051 (2017). https://doi.org/10.1038/ncomms16051