The mitotic spindle ensures the faithful segregation of chromosomes. Here we combine the first large-scale serial electron tomography of whole mitotic spindles in early C. elegans embryos with live-cell imaging to reconstruct all microtubules in 3D and identify their plus- and minus-ends. We classify them as kinetochore (KMTs), spindle (SMTs) or astral microtubules (AMTs) according to their positions, and quantify distinct properties of each class. While our light microscopy and mutant studies show that microtubules are nucleated from the centrosomes, we find only a few KMTs directly connected to the centrosomes. Indeed, by quantitatively analysing several models of microtubule growth, we conclude that minus-ends of KMTs have selectively detached and depolymerized from the centrosome. In toto, our results show that the connection between centrosomes and chromosomes is mediated by an anchoring into the entire spindle network and that any direct connections through KMTs are few and likely very transient.
The mitotic spindle is a dynamic microtubule-based apparatus that ensures the segregation of chromosomes during cell division. Its properties are governed by an array of factors, such as polymerases, depolymerases, motor proteins, cross-linkers and other microtubule-associated proteins1. Remarkably, despite the high turnover of microtubules throughout mitosis2, the spindle maintains its bipolar structure with the chromosomes at its center and two poles that are separated by the plane of cell division. This stereotypical arrangement is widely believed to mediate the forces between the metaphase plate and the poles that separate sister chromatids during mitosis. In this paper, we set out to identify the cytoskeletal ultrastructure in C. elegans mitotic spindles that underlies this function, and how this ultrastructure is generated, using a combination of large-scale electron tomography, light microscopy and mathematical modelling.
In all spindles, the microtubule cytoskeleton connects to chromosomes via a special class of microtubules called kinetochore microtubules (KMTs). However, how KMTs bind to chromosomes varies substantially between organisms. In mammals, microtubules attach to monocentric kinetochores that are located at specific sites on the chromosome, whereas many plants, insects, arachnids and nematode species like C. elegans have holocentric kinetochores, for which microtubule-binding sites are spread along the entire surface of the chromosomes3,4. If the role of KMTs is to mediate forces between chromosomes and spindle poles, they need to somehow connect to the centrosomes. Indeed, that such forces exist in C. elegans is evidenced by the maintenance of half-spindle lengths throughout mitosis5 and in many perturbations experiments. In budding yeast, single continuous KMTs span the full pole-to-chromosome distance6. In mammals, kinetochores and centrosomes are connected by bundles of KMTs, called kinetochore fibres (k-fibres)1. It is one aim of our study to identify the nature of the KMT-centrosome connection in C. elegans, which is so far unknown.
A related question is the site of KMT nucleation. Both centrosomes and chromosomes have been proposed as sites of KMT origin7,8,9,10. In the case of centrosomal origin, a radial array of microtubules emanates from centrosomes, and those that hit kinetochores can bind and become stabilized as KMTs11,12. In the case of chromosomal origin, microtubules instead nucleate around chromosomes and only later attach to kinetochores, as observed in Xenopus cell-free extracts13. In most systems, the origins of KMTs are unclear14,15,16. Furthermore, centrosomal and chromosomal microtubule nucleation need not be mutually exclusive and may function together during spindle assembly17,18. Finally, the nucleation of microtubules in the bulk of the spindle has also been reported19,20. Here we address the origin of KMTs in C. elegans embryos.
Although C. elegans spindles have been widely studied21, much remains unknown about the nature and role of the KMTs. While light microscopy provides a dynamic picture of the spindle15,22,23,24, it cannot resolve individual microtubules. Electron microscopy overcomes this limitation though, until now, little quantitative data on the fine structure of mitotic spindles has been published. The available data is mostly limited to full reconstructions of S. cerevisiae6, and partial reconstructions of Ptk2 cells25 and early C. elegans embryos26,27.
Here we provide the first full 3D reconstructions of C. elegans spindles with single-microtubule resolution using electron tomography. These data allow us, for the first time, to assess the precise locations and spatial relations of all microtubules. We combine this ultrastructural analysis with measurements of microtubule dynamics and show that KMTs in C. elegans are nucleated around the centrosomes. Strikingly, KMTs rarely span the entire pole-to-chromosome distance, and using mathematical modelling we show that these findings are consistent with a model in which KMT minus-ends selectively detach from the centrosomes and depolymerize. Our findings imply that the KMT-mediated connection between chromosomes and centrosomes in C. elegans spindles is surprisingly transient, which predicts that a direct and permanent connection of chromosomes and centrosomes is not a prerequisite for chromosome segregation.
We quantitatively analysed the organization of mitotic spindles in the single-cell C. elegans embryo. Our electron tomographic approach provided a 3D view of mitotic spindles in metaphase and anaphase (Fig. 1a–d; see Supplementary Movie 1 for a full 3D reconstruction of the metaphase spindle; Supplementary Figs 1 and 2). We analysed data per half spindles (see Table 1 for a summary of all data sets). A half spindle contained 8,331 microtubules (median, n=5), without clear visual differences between metaphase and anaphase. We divided the reconstructed microtubules into three groups: KMTs, spindle microtubules (SMTs) and astral microtubules (AMTs). All microtubules ending in the ribosome-free zone around the chromosomes were considered as KMTs (Supplementary Movie 2)26. We detected ∼227 KMTs per half spindle in metaphase (median, n=6; Fig. 1e,f; Supplementary Fig. 2 and Supplementary Movie 2 for a full 3D reconstruction of the KMTs in metaphase 1) and 180 KMTs per half spindle in anaphase (median, n=3; Fig. 1g,h). Non-KMTs that had their centre of mass within a cone with an opening angle of 18.4° towards the chromosomes were classified as SMTs. All others were considered AMTs (Fig. 1i, see also Methods).
KMTs randomly attach to holocentric chromosomes
We first used our data to investigate the distribution of the KMT attachment sites on chromosomes. To this end, we projected the positions of all attached KMT ends on to the plane of cell division. There were 6 to 50 KMTs attaching to each of the 12 chromosomes per pole-facing side (Fig. 1j). Despite the larger kinetochore region, this is surprisingly close to the number of KMTs attaching to the monocentric mammalian kinetochore28. We found that the number of attached KMTs correlated with the area of the chromosomes (Supplementary Fig. 3a, Pearson’s correlation coefficient is indicated). The average density of KMTs on the metaphase plates of the half spindles was from 16 to 27 microtubules per μm2. Within each dataset the KMT density was nearly constant (Supplementary Fig. 3b). We next asked whether the typical distance between KMT ends on chromosomes was random or followed a pattern that might reveal the existence of preferred attachment sites on the chromosomes. We found the attachment sites to be roughly uniformly distributed, with a slight preference towards a spacing of about 127±4 nm (s.e.m., n=7 spindle halves) between two individual KMT ends (Fig. 1k). This weak preferred spacing can arise from the fact that microtubules cannot overlap, that is, they have excluded volume interaction29. However, those sites are distributed along the entire length of the chromosomes (Supplementary Fig. 4). We conclude that KMTs in C. elegans do not bundle up to form k-fibres. This is consistent with visual inspection of the tomography data.
Most KMT ends are far from the centrosomes
We next asked whether all KMTs are directly connected to the centrosomes. To answer this question, we analysed the distribution of distances of the microtubules’ pole-facing ends from their mother centrioles. In this regard, KMTs are very different from SMTs, as seen in their cumulative distribution functions (CDFs; Fig. 2a,b). The nearly linear CDF for KMTs suggests a nearly uniform distribution of KMT end positions from the centrosome. Conversely, the rapid rise, then levelling, in the SMT CDF shows that SMT ends are mostly clustered near centrosomes. From the CDFs, we find that only 22±4% (s.e.m., n=5 half spindles) of the KMT ends were located within 2 μm of their corresponding mother centriole (Fig. 2a), while for SMTs, the fraction was 46±4% (s.e.m., n=5 half spindles; Fig. 2b). This suggested that the majority of KMTs do not make contact with the centrosomes. In addition, this result prompted us to measure the density of KMTs and SMTs (Fig. 2c) and their ratio along the half-spindle axis, which is ∼6.5 μm in length (Fig. 2d). The ratio of the number density of KMTs to SMTs decreases from chromosomes to poles, dropping from more than one to zero. This further supported the finding that few KMTs span the full distance from chromosomes to centrosomes.
KMTs have distinct length distributions
The centrosome-proximal end position of KMTs and the change in KMT/SMT ratio along the spindle axis suggested a difference in the properties of KMTs versus SMTs and AMTs. To address this, we analysed the length distribution of the different microtubule classes showing that the three classes of microtubules displayed indeed their own distinct length distributions. AMTs had an exponential length distribution (Fig. 3a). The length distribution of SMTs was exponential for shorter lengths (up to 2 μm), similar to AMTs, followed by a flatter distribution up to about 5–7 μm (Fig. 3b). Very differently, KMTs showed an apparently uniform length distribution, with only a few short microtubules in their population (Fig. 3c; see also Supplementary Fig. 5 for a fit of the length distributions). In summary, this suggests that a different process than those for AMTs and SMTs governs the KMT length distribution. Exponential length distributions as found for AMTs and SMTs are typical of dynamic instability kinetics30,31,32. A uniform length distribution of KMTs, however, indicates a difference in dynamics and possibly a higher stability of the plus-ends against catastrophe.
KMTs are nucleated at centrosomes
The centrosome in the C. elegans mitotic embryo is a major site of microtubule nucleation. However, the KMTs in our reconstructions were not directly connected to centrosomes. This raised the question about the origin of KMTs. To investigate this, we looked at the end morphologies of KMTs, as an indication for their dynamic state33,34,35,36. In our reconstructions, we distinguished open and closed ends of KMTs (Supplementary Fig. 6a), however, about 40% of the KMT ends could not be unambiguously classified. Analysing the annotated ends, we found that about 71% (n=766) of those KMT ends at chromosomes in metaphase and 79% (n=340) of KMT ends in anaphase displayed an open-end conformation with flared ends (Supplementary Fig. 6b). This is consistent with earlier findings26,27. Furthermore, 38% (n=725) of the pole-facing ends of KMTs in metaphase and 41% (n=340) of KMT ends in anaphase were open. Analysing only those KMTs with both end morphologies clearly identified, we found that the majority of such KMTs had two open ends (Supplementary Fig. 6c). Since open ends are thought to indicate either growth or shrinkage, our data suggest that most of the KMTs have two dynamic ends. In contrast, closed ends most likely indicate the minus-end of a microtubule.
We then analysed the position of microtubules according to their length (Fig. 3d). We found that the majority of short SMTs (below 1 μm) in metaphase and anaphase were located near the centrosomes. This suggests that most nucleation happens near the centrosomes. However, short KMTs near chromosomes are not especially prevalent in that population. We thus asked whether KMTs, unlike the majority of microtubules, nucleate at chromosomes. To investigate this, we analysed the formation of KMTs around chromosomes in one-cell embryos in prometaphase (Supplementary Fig. 7a) and two-cell zyg-1(RNAi) embryos with monopolar spindles (Supplementary Fig. 7b–d)37. First, in both conditions we could not detect any short microtubules on or around chromosomes. Second, if microtubules were nucleating around chromatin in the two-cell zyg-1(RNAi) embryo, one might expect to see KMTs at the outer side of the metaphase plate (that is, the side not connected to the spindle pole), which we do not. Hence, we conclude that the chromosomes are not the site of KMT nucleation.
Microtubules grow unidirectionally away from centrosomes
As the polarity of individual microtubules cannot be clearly determined in our tomograms, we turned to light microscopy to infer the direction of microtubule growth within the spindle. We visualized the motion of growing microtubule plus-ends by live-cell imaging of EBP-2, which specifically binds to the polymerizing microtubule plus-ends (Fig. 4)38. The mitotic spindle is a crowded environment preventing the tracking of individual EBP-2 comets. Therefore, we developed a novel method to analyse the EBP-2 velocity within the spindle based on spatial–temporal correlation (see also Methods). We analysed four different regions: within the spindle, at chromosomes, and within a central (inner astral) and a peripheral (outer astral) region of the centrosome (Fig. 4a and Supplementary Movie 3). The estimated velocity of the comets was 0.34±0.02 μm s−1 (s.e.m., n=8 half spindles) in the spindle, 0.49±0.04 μm s−1 (s.e.m., n=8 half spindles) at chromosomes and 0.27±0.03 μm s−1 (s.e.m., n=8 half spindles) in the central region around the centrosomes (Fig. 4b). In contrast, we estimated a velocity of about 0.73±0.02 μm s−1 (s.e.m., n=8 half spindles) in the periphery of the centrosome, suggesting different microtubule dynamics inside spindles than outside of spindles. In addition, we analysed the direction of EBP-2 comets. This showed that most comets move away from the centrosomes and towards the chromosomes (Fig. 4b), indicating that the majority of minus-ends of microtubules in C. elegans spindles are located at the centrosomes, whereas plus-ends grow towards the chromosomes. We challenged this finding by performing laser microsurgery to ablate microtubules within the spindle and so measure their polarity by generating new microtubule plus- and minus-ends24. Microsurgery resulted in the formation of a single wave of depolymerization of the newly created microtubule plus-ends towards the centrosome (Supplementary Movie 4). This indicates that microtubules within the spindle have the same polarity, with the minus-ends oriented towards the poles and the plus-ends facing the chromosomes, thus confirming our EBP-2 data. By combining the dynamic data with the ultrastructural data, we are able to determine the position of minus-ends as well as plus-ends within the mitotic spindle.
Chromosome-bound KMT ends are relatively static
After having established that SMTs grow from their plus-ends towards the chromosomes, we sought to understand the behaviour of KMT plus-ends. For this, we measured the dynamics of microtubules by fluorescence recovery after photo-bleaching (FRAP) experiments. We bleached a small stripe of ∼2 μm width in an area close to the chromosomes in metaphase (Supplementary Movie 5). To infer the dynamics of the KMT plus-ends, which are bound to chromosomes, we measured whether the bleach mark moved (Fig. 4c). Our analysis showed a weak bias of the photobleached region for moving towards the chromosomes, although the velocity detected is 0.029±0.005 μm s−1 and thus close to our detection limit. However, this finding ruled out that KMTs are growing through polymerization at or around chromosomes, since this would result in a motion of the photobleached region away from the chromosomes at a velocity that is comparable to the microtubule growth velocity. If anything, the small bias in the opposite direction is consistent with a slow microtubule flux within the C. elegans spindle.
Microtubules in the mitotic spindle are indirectly coupled
Our observation that the majority of KMTs did not reach the centrosome raised the question of how a strong mechanical connection between chromosomes and centrosomes can be achieved during mitosis. Because KMTs may indirectly connect chromosomes to centrosomes, we searched for potential locations of microtubule–microtubule interactions. For such a quantitative network analysis, we considered the following parameters: the centre-to-centre distance between two microtubules, the angle between microtubules and the distance between the pole-proximal end of a non-KMT and the centrosome (Fig. 5a). We started with a neighbour density analysis by measuring the centre-to-centre distance of all microtubules crossing a plane at two distinct positions, at 25% and 75%, along the axis of the half-spindle length (Fig. 5b). In comparison to randomly placed microtubules, this analysis revealed an increased frequency of microtubules with a centre-to-centre distance of 55±4 nm at 25% as well as at 75% half-spindle length (Fig. 5c,d). This indicates a weak clustering. The measured distances between the microtubules are comparable to the size of microtubule-associated proteins or molecular motors25,39,40. However, another possibility is that microtubule-to-microtubule connections are established by cytoplasmic flow and viscous coupling. Moreover, the viscous drag forces between nearby microtubules will further couple them mechanically.
In the light of a possible indirect chromosome-to-centrosome connection, we further aimed to analyse the network capabilities of KMTs and SMTs, and used the interaction distance and the interaction angle to describe possible microtubule–microtubule interactions. We plotted the fraction of KMTs that are able to connect to the centrosome by multiple interactions. For different interaction angles (5–45°), we plotted the fraction of KMTs reaching the centrosome within a radius of 2 μm as a function of increasing interaction distance (Fig. 5e). This analysis showed that the majority of KMTs could be connected to the centrosome by interacting with SMTs at a 30–50 nm distance, with an interaction angle of 5–45°. By counting the number of interactions that were needed to reach the centrosome, we show that two interactions are typically sufficient to establish a connection to the centrosome in metaphase and anaphase (Fig. 5f). Alternatively, a single KMT might be sufficient for chromosome segregation as shown in budding yeast6. Along this line, we found that on average 1–3 KMTs per chromosome in metaphase and 1–2 KMTs in anaphase are directly connected to the centrosome (Fig. 5f). For this analysis, we counted KMTs, which had their minus-end 2 μm and closer to the mother centriole. However, the outcome of this analysis strongly depends on the set distance of the microtubule ends to the mother centriole. Along this line, within a radius of 1.2 μm from the mother centriole on average less than one KMT in metaphase and anaphase directly connect to the centrosome. Both results imply an indirect centrosome-to-chromosome connection and the existence of a spindle network based on KMT and SMT interaction.
KMT minus-end dynamics is required for spindle organization
By combining 3D electron tomography and light microscopy, we showed that the KMTs’ length distribution (nearly uniform) is distinct from the SMTs’ (exponential), that the vast majority of microtubules are nucleated near the centrosomes, and that hardly any KMTs span the entire distance from chromosome-to-centrosome. Moreover, we found that microtubule flux is small. We next sought, by using stochastic simulations of different scenarios of KMT attachment and detachment (Fig. 6), to understand what microtubule dynamics could generate these data.
In our modelling, we assigned each microtubule a nucleation time from a Poisson process with a nucleation rate R, and initial minus-end position within 3 μm of the centrosome based on the measured distribution of SMT minus-ends (Fig. 6f) and the position of short microtubules within the spindle (Figs 2b and 3d). The nucleation rate was adjusted such that the steady state emerging from our simulations had a number of KMTs compatible with our experimental findings (Fig. 1e–h). SMTs grew from their plus-ends with a velocity vg=0.4 μm s−1 (as measured; see Fig. 4b), until they either underwent catastrophe with rate κ=0.25 s−1, as estimated from the decay of the length distribution of short SMTs (see Methods), or reached the metaphase plate. Note that for simplicity we assumed that catastrophe from a free plus-end immediately destroys a microtubule and so we did not track SMT depolymerization explicitly. SMTs that reached the chromosomes, which were positioned L=6.5 μm away from the centrosomes (as measured from ultrastructure), attached and became KMTs and could no longer undergo catastrophe from their plus-ends. Finally, KMTs only rarely spanned the entire centrosome-to-chromosome distance (Figs 2a, 3c and 5f), which suggested that upon becoming KMTs microtubules rapidly switched to a depolymerizing state.
Within these constraints we formulated three models of KMT and SMT dynamics, which we called flux, stochastic detachment and selective detachment models, respectively (see Fig. 6 and model flowcharts in Supplementary Fig. 8, see Table 2 for parameters). In the flux model, microtubule plus-ends switched deterministically to shrinking upon becoming KMTs, while staying stably attached to the chromosomes (Fig. 6a), and the minus-end became detached from the centrosome. We took the overall plus-end shrinking velocity vd=0.03 μm s−1 in accordance with our FRAP measurements (Fig. 4c). In this model, there were no adjustable parameters. To compare the model to the experimental data, we ran the simulation sufficiently long to reach statistical steady state, which was then sampled several times, over long times, to obtain an expectation and standard deviation for the extracted distributions.
The flux model produced a KMT length distribution consistent with the data (Supplementary Fig. 9a), but given the low shrinking velocity vd and the constraint of producing the observed number of KMTs it underestimated the number of SMTs by a factor of five (relative to observation, and as reflected in length and minus-end position frequencies plotted in Supplementary Fig. 9b,c). Furthermore, in the flux model a de-novo-generated spindle took more than 5 min to reach its steady state, which is long compared to the typical duration of metaphase in C. elegans (Supplementary Fig. 9c, inset). We concluded that microtubule plus-end shrinking alone is insufficient to explain the data. This suggested that microtubule minus-ends in the spindle are dynamic.
We now investigated models where KMTs shrink from their minus-ends, and not their plus-ends. In the stochastic detachment model (Fig. 6b) all microtubule minus-ends, whether SMT or KMT, switched stochastically, with rate r, to a shrinking state and moved away from the centrosome. In the selective detachment model (Fig. 6c) only KMT minus-ends could switch, while SMT minus-ends remained unconditionally stable. Furthermore, in the stochastic detachment model, KMT plus-ends kept growing against the chromosomes even after the minus-end started to shrink, while in the selective detachment model plus-ends attached to chromosomes stopped growing after the onset of minus-end depolymerization. In the detachment models, the minus-end depolymerization velocity vd and the switching rate r were adjustable parameters. As with the flux model, the simulations were evolved to statistical steady state, after which the desired distributions were extracted.
We found that both models could be tuned to produce numbers of both KMTs and SMTs close to experiments (Fig. 6d,e; Supplementary Fig. 10a–c), while reaching steady state in under a minute, which is compatible with the duration of mitosis in C. elegans (Fig. 6f, inset; Supplementary Fig. 10c, inset). However, the selective detachment model captured far better the shapes of the distributions of KMT length (Fig. 6d; Supplementary Fig. 10a) and SMT minus-end positions (Fig. 6f; Supplementary Fig. 10c).
We next asked whether the models that we inferred from static tomographic data would also account for spindle dynamics. For this, we used our models to predict the FRAP dynamics of a box of photobleached spindle material with a width of 1 μm at a distance of 2.5 μm from the chromosomes. We then plotted the predictions of our models and compared them to the mean intensity measurements of our FRAP experiment (Fig. 6g; Supplementary Figs 9d, 10d). The recovery rate in metaphase as measured by FRAP was approximately t1/2=21.4 (19.7, 23.2) and (95% CI, n=7 spindles), in agreement with previously reported data41. We find that the selective detachment model quantitatively captures our FRAP data, whereas the stochastic detachment and flux models do not. For the selective detachment model, the recovery curve is the sum of a fast (∼5 s) exponential contribution from recovering SMTs and a slower (∼20 s) linear contribution from recovering KMTs.
Our findings imply that KMTs are transient, despite their plus-ends being stabilized against catastrophe. This implies that the spindle can recover its unperturbed structure rapidly (that is, within∼20 s) even after drastic disruptions, such as local laser ablation. Our modelling further suggests that selective destabilization of KMT minus-ends is required for the observed spindle structure. We predict that an experiment inhibiting minus-end depolymerization would measure a KMT length distribution that was clustered around the centrosome-to-chromosome distance, instead of uniform and observe the number of KMTs increase linearly as time progresses from metaphase to anaphase (assuming a wealth of KMT binding sites). In contrast, for an experiment with all microtubule minus-ends instead rendered unstable, we predict a KMT length distribution that is exponentially decaying rather than uniform.
The mitotic spindle ensures the faithful segregation of chromosomes, which requires that a connection between centrosomes and chromosomes be established and maintained throughout mitosis. Prior to our work, it was largely unknown how the ultrastructure of the microtubule cytoskeleton supports this role and provides a coupling which resist the forces acting on the spindle during mitosis42, yet robust against even drastic perturbations43. To address this, we provided the first complete ultrastructures of five C. elegans mitotic spindle halves, which together with dynamic light microscopy revealed the origin of KMTs, the nature of the connection between chromosomes and centrosomes, and enabled us to formulate a mathematical model for the establishment and maintenance of spindle architecture.
From electron microscopy and from tracking the dynamics of growing microtubule plus-ends, we found that the large majority of microtubules in the C. elegans mitotic spindle are nucleated in a small region around the centrosomes. This is strikingly different from spindles in acentrosomal C. elegans oocytes, where microtubules nucleate around chromosomes44,45. It seems that the presence of centrosomes inhibits or outcompetes other pathways of microtubule nucleation at this stage. Indeed, in mutant studies we could not detect microtubules nucleating around the chromosomes. Thus, we conclude that spindle microtubules, including KMTs are nucleated around the centrosomes.
Given the centrosomal origin of KMTs it is striking that in electron microscopy the majority of their minus-ends are remote from the spindle pole. Only 22% of KMTs reach within a distance of 2 μm from the centrioles. If indeed the role of KMTs is to connect centrosomes to chromosomes, this suggests that they do so by anchoring into the spindle network rather than by a direct linkage. In our network analysis, we found that most KMTs could connect to the centrosomes by one or two intermediate microtubules, given reasonable assumptions on the size of potential linker molecules. Visualizing these linkers is, however, far beyond our resolution limit. For now, we speculate that the anchoring of KMTs into the spindle network might be supported by mechanisms similar to the ones found to link k-fibres into the spindle network in mammalian cells46,47, where dynein seems to be the main crosslinking agent. An indirect centrosome-to-chromosome connection could be further supported by a viscous coupling, as the microtubules within the cytoplasm might be close enough to generate an enhanced viscous drag48. Anchoring of KMTs into the spindle network might also explain similarly loose KMT architectures in other organisms, such as crane flies49 or the algae Oedonium50. It will be important to explore the differences between the ‘anchoring’ mechanism we propose here and direct connections, such as the ones observed for instance in Ptk2 cells25, and their implications for cell division. We speculate that anchoring into a spindle network can provide stability, which might be particularly important for spindles that operate under external forces, such as the C. elegans spindle, which during normal cell division experiences strong pulling forces from the cell cortex, yet maintains its size and shape43.
To understand how the anchoring architecture of C. elegans mitotic spindles is maintained, we turned to mathematical modelling. We found that the detachment of KMTs from the spindle pole in C. elegans was best explained by selective detachment of their minus-ends once the plus-ends bind to kinetochores. This model provides robust predictions of how spindle structure would change in experiments targeting the detachment mechanism, and we presented model results, which illustrate that the spindles’ architecture would look very different in the absence of such a detachment mechanism. The selectivity for KMTs by the detachment mechanism could plausibly be achieved through compressive loads building up on growing KMTs, which span chromosomes and centrosomes. How these compressive loads act specifically on KMTs, despite their coupling into the spindle network of AMTs, is a challenge to our theory. Centrally important in addressing it will be understanding through what elements in the spindle network—microtubules, cross-links, cytoplasm—are forces being transmitted. Generically, viscous and frictional couplings between nearby microtubules would penalize their relative motion and thus prevent KMTs from sliding out of the spindle network, yet allow a microtubule that spans the chromosome-to-centrosome distance to build up relatively large compressive loads.
Surprisingly perhaps, our mathematical model also predicts that the lifetime of KMTs is, like SMTs, short relative to the time-scale of mitosis. We speculate that the rapid turnover of all microtubules might be required to maintain a robust yet flexible enough spindle architecture to correct against perturbations, since it would allow the spindle to recover from perturbations within about 20 s. This raises the question of how AMTs find the kinetochores sufficiently fast such that chromosomes remain steadily attached to the spindle network, despite the rapid turnover of KMTs. The answer might lie in the holocentric nature of C. elegans chromosomes, to which microtubules can bind at any point of the surface. This, as our modelling suggests, allows sufficiently fast binding to maintain a steady connection by transient microtubules, and might be a key difference between spindles with holocentric and monocentric chromosomes. Although major components of kinetochores are conserved in nematodes and mammals51, differences and similarities of holocentric versus monocentric kinetochore/KMT architecture have not been systematically addressed yet.
Our finding that the connection between centrosomes and chromosomes is supported by anchoring into the spindle network rather than by direct links, together with the observation that the centrosome-to-chromosome distance remains constant throughout anaphase51, raises the question how the segregation of the sister chromatids is achieved. It is tempting to speculate that microtubules organized between the segregating chromatids may play an important role during mitotic chromosome segregation, similar to meiotic divisions in C. elegans oocytes44. This view on the role of inter-chromosomal microtubules is supported by the observation that chromatids in C. elegans mitosis can segregate without centrosomes in a CLASP-dependent manner52. We strongly believe that a detailed ultrastructural analysis of such inter-chromosomal microtubules is needed to support any further robust discussion on chromosome segregation.
Worm strains, RNA interference and feeding clones
All C. elegans strains were cultured at either 16 °C or 25 °C (ref. 53). The following strains were used in this study: wild-type N2 Bristol; MAS37 (unc-119(ed3) III; [pie-1::epb-2-gfp;unc-119(+)]54. RNAi experiments were performed by feeding55. Worms for zyg-1 (RNAi) were grown for 24 h at 25 °C on feeding plates. The feeding clone for zyg-1 (F59E12.2) was provided by A. Hyman (Dresden, Germany).
Sample preparation for electron microscopy
Wild-type N2 C. elegans hermaphrodites were dissected in M9 buffer, and single embryos early in mitosis were selected and transferred to cellulose capillary tubes (Leica Microsystems, Vienna, Austria) with an inner diameter of 200 μm. The embryos were observed with a stereomicroscope until either metaphase or anaphase and then immediately cryo-immobilized using an EM PACT2 high-pressure freezer equipped with a rapid transfer system (Leica Microsystems, Vienna, Austria)56. Freeze substitution was performed over 3 days at −90 °C in anhydrous acetone containing 1% OsO4 and 0.1% uranyl acetate using an automatic freeze substitution machine (EM AFS, Leica Microsystems, Vienna, Austria). Epon/Araldite infiltrated samples were flat embedded in a thin layer of resin, polymerized for 3 days at 60 °C, and selected by light microscopy for re-mounting on dummy blocks. Serial semi-thick sections (300 nm) were cut using an Ultracut UCT Microtome (Leica Microsystems, Vienna, Austria). Sections were collected on Formvar-coated copper slot grids and poststained with 2% uranyl acetate in 70% methanol followed by Reynold’s lead citrate57.
Data acquisition by electron tomography
Colloidal gold particles (15 nm; Sigma-Aldrich) were attached to both sides of semi-thick sections collected on copper slot grids to serve as fiducial markers for subsequent image alignment. For dual-axis electron tomography58, series of tilted views were recorded using a TECNAI F30 transmission electron microscope (FEI Company, Eindhoven, The Netherlands) operated at 300 kV. Images were captured every 1° over a ±60° range and a pixel size of 2.3 nm using a Gatan US1000 CCD camera (2k × 2k). For each serial section two montages of 2 × 3 frames were collected and combined to a supermontage using the IMOD software package to cover the pole-to-pole distance of the spindles59. For image processing, the tilted views were aligned using the positions of the colloidal gold particles as fiducial markers. Tomograms were computed for each tilt axis using the R-weighted back-projection algorithm60. For double-tilt data sets two montages, each consisting of six tomograms, were aligned to each other and combined to a supermontage58. To cover a large volume of the pole-to-pole region of each mitotic spindle, we recorded on average 24 consecutive serial sections per spindle.
3D reconstruction and automatic segmentation of microtubules
We used the IMOD software package (http://bio3d.colourado.edu/imod) that contains all of the programs needed for calculating electron tomograms59. Reconstructed tomograms were flattened and the two acquired montages of each section were combined to a supermontage using the edgepatches, fitpatches and tomostitch commands contained in the IMOD package. We applied the Amira software package with an extension to the filament editor of the Amira visualization and data analysis software for the segmentation and automatic tracing of microtubules61. We also used the Amira software to stitch the obtained 3D models in z to create full volumes of the recorded spindles62. The automatic segmentation of the spindle microtubules was followed by a visual inspection of the traced microtubules within the tomograms and correction of the individual microtubule tracings. Corrections included: manual tracing of undetected microtubules, connection of microtubules and deletions of tracing artifacts (for example, membranes of vesicles). Approximately 5% of microtubules needed to be corrected.
Data analysis was performed using either the Amira software (Visualization Sciences Group, Bordeaux, France) or by Matlab (R2015b, The MathWorks, Nitick, USA).
Neighbourhood density of microtubules. The microtubule neighbourhood densities for 2D slices in comparison to random samples were computed in two steps. First, slices were defined along the centrosome-to-chromosomes axis for each half spindle. In addition, a cone was defined along the same axis, starting at the centre of the mother centriole and opening with an angle of 18.4° towards the chromosomes (Fig. 1i). The intersection area of this cone with each slice thus determined the regions for the microtubule density measurements. Second, the radial distribution function was estimated. For each microtubule point, the local density in a range of radial distances was computed. The mean over all microtubules provided an estimate for the radial distribution function as a neighbourhood density. For the normalization, we used 10,000 sets of randomly placed microtubules with the same total number as in the experiment.
KMT attachment to chromosomes. To correlate the number of KMTs attaching to the chromosome surface, we assumed the shape of the chromosome surface available for KMT attachment to be a rectangle. This area of each rectangle corresponding to a chromosome was then correlated to the number of KMT attaching to the individual chromosome.
Length distribution of microtubules. For the analysis of the microtubules length distributions (Fig. 3a,b), we checked whether the microtubules that leave the reconstructed tomographic volume affect our results (∼11 μm × 16.5 μm × 6 μm for each half spindle). We removed microtubules with one end point <250 nm apart from the boundary of the volume. These microtubules potentially leave the tomographic volume. This had only consequences for the length distribution of the AMTs in terms of the total number and changed only slightly the shape of the distribution (Supplementary Fig. 11). Furthermore, in all analyses, microtubules shorter than 100 nm were excluded to reduce errors due to the minimal tracing length. In addition, the end point type could not always be identified during inspection. The number of unclear end points lies in the range of 2% and is uniformly distributed over the kinetochore region. Therefore, we do not expect a relevant error in this analysis.
Network analysis. For the detection of possible interactions in 3D, a three-step algorithm was implemented in Amira. First, for each microtubule, the distance to the centriole was computed and all microtubules with a distance smaller than this distance were marked as connected to the centrosome. It is important to note here that each microtubule is represented as a piece-wise linear curve. For each line segment of a microtubule the distance to the centriole, which is represented as a point, was computed analytically. The distance of a microtubule was defined as the minimum of all segment distances. Second, for each pair of microtubules the distance and the angle were computed. The distance between two microtubules was defined as the minimum of the distances between all their line segments. A 3D grid data structure was used to accelerate these computations. To reduce errors due to local distortions of the microtubules, the angle is defined by the angle between the lines through the start and end points of the microtubules. Third, based on these data an abstract graph was constructed, where each microtubule is represented as a vertex and each interaction (based on thresholds for interaction distance and angle) as an edge. Finally, for each KMT the shortest path to a microtubule marked as connected to the centrosome was computed in the graph using Dijkstra’s algorithm.
Error analysis of microtubule segmentation and stitching
For the complete imaging, reconstruction and microtubule segmentation pipeline of a spindle, the following errors needed to be investigated. First, during the data preparation and the imaging process, the tomograms are locally distorted. Furthermore, the exposure of the electron beam causes a shrinking of the sample. During the reconstruction of the microtubules, however, most errors occur in the tracing and matching process. In addition, the data is again distorted in all directions to align the tomograms. We assumed that this distortion primarily compensates the distortion of the imaging process. For the tracing, the error was previously analysed for reconstructions of C. elegans centrosomes63. Although the spindle data is larger, the tomogram content is similar to the centrosome data sets, and thus we assumed that the error lies in the same range of 5–10%. In addition, the traced microtubules were manually verified. It is more difficult to estimate the error of the matching algorithm62, since it depends on the local density and properties of the microtubules. For this reason, the stitched microtubules were manually verified and corrected for all KMTs. The quality of the analysis of the KMTs, therefore, should be influenced only by minor spatial distortions. To estimate the overall quality of the stitching, the distribution of microtubules endpoints in z-direction (that is, normal to the plane of the slice) was analysed by binning the endpoints in z-direction (Supplementary Fig. 12). Bins were fixed to be either inside a section (50% of slice thickness in z-direction, centred) or across a boundary between sections (25% of slice thickness in z-direction of either adjacent section). To account for a varying section thickness a microtubules endpoint density (in z-direction) was defined by normalizing over the width of these bins. We assume that high-quality stitching would result in a smooth curve. However, we did detect some peaks within the histograms. Generally, most of these peaks are found within the sections. This can be explained by the fact that the boundary regions of a tomogram are often blurry and microtubules are possibly not traced within this area. This would explain systematically lower endpoint number in boundary regions and the saw tooth features in the histograms. This may be especially relevant in regions were microtubules run parallel to boundaries.
Worms were dissected in M9 buffer on a coverslip to obtain embryos. The embryos were then transferred to a glass slide with a 2% agarose pad.
EBP-2 analysis. Imaging of the EBP-2::GFP comets was carried out on a Nikon TiE spinning disc confocal microscope using a Nikon Plan-Apochromat × 60 water-immersion objective and an iXon EM+DU-897 BV back illuminated EMCCD camera (Andor, Belfast, UK). A single plane was acquired every 250 ms with an exposure of 200 ms starting from metaphase until embryos reached telophase using the IQ3 software (Andor). We analysed the local velocities of growing microtubule tips labelled by EBP-2. To obtain a robust estimate in the highly crowded spindle, EBP-2 comets were segmented in each frame using the mosaic suite in Fiji64. We then analysed the spatial–temporal correlations of the segmented EBP-2 comets along the radial direction. This approach avoids the problem of linking the right EBP-2 mark in subsequent frames in a crowded environment. The initial segmentation is necessary as otherwise the signal-to-noise ratio is not sufficient. The spatial–temporal correlations were computed by first resynthesizing movies, where each identified EBP-2 spot was convolved with a Mexican-hat wavelet. Along the radial direction the size was set to a half pixel size and in the orthogonal direction enlarged by a factor of 4. This ensures that motions along the circumferential direction are still permissible. For the time lag of the spatial–temporal correlations, we used 0.6 s and we averaged over all circumferential positions and over the duration of metaphase.
FRAP analysis. For FRAP experiments, we used a Nikon microscope (Yokogawa CSU-X1 Spinning disk; equipped with a × 60 1.2 NA objective, Chamaleon 2-photon laser for ablation and an Andor Ixon Ultra 897 camera). For data analysis, the position of the two centrosomes was identified and an intensity profile extracted along this axis. We averaged in the perpendicular direction over a distance of 2 μm. The profiles were aligned along the axis by fitting a Gaussian profile to the intensity peak of chromatin, which was labelled by histone::GFP. The photobleached region was fitted by a second order polynomial and the location estimated from the position of the minimum. We used the distance between these two to estimate the velocity of the photobleached region with respect to the chromosomes. For the recovery we analysed the amplitude at the centre of the photobleached region with respect to the intensity at the mirrored position on the axis.
Stochastic simulations of KMT formation
We performed stochastic simulations for three different models of microtubule dynamics, which we call the flux model, the stochastic detachment model and the selective detachment model, respectively (Supplementary Fig. 8). The models were implemented using a standard Gillespie algorithm.
In the following, we lay out how the parameters for our stochastic models have been chosen. We first need to specify where and when new microtubules nucleate. Under the assumption that most microtubules are SMTs and that the minus-ends of SMTs are mostly immobile, the measured distribution of SMT minus-end positions provides a good estimate for the nucleation positions of microtubules. We thus use this measured distribution to determine the nucleation position of new microtubules in our model. Note that we truncate the measured distribution at a distance of 3 μm from the centrosomes, since minus-ends further away are most probably caused by effects that our modelling does not capture. The resulting nucleation profile is shown in Fig. 6f.
Before attaching to chromosomes, SMTs only grow at the velocity vg and catastrophe at the rate κ. Thus the length distribution ψ(ℓ) of SMT length obeys ∂tψ(ℓ) = −vg∂ℓψ−κ ψ, ∂; which is solved at a steady state by ψ(ℓ) = A exp(−ℓ/ (vgκ)). Since vg=0.4 μm s−1 is known from direct measurements (Fig. 4b), we can infer κ by fitting to experiments, and obtain κ0.25 Hz (Supplementary Fig. 5).
Furthermore, we need to specify the distance L from chromosomes to centrosomes, which we take at 6.5 μm in accordance to our ultrastructure data. Finally, we need to specify the speed of KMT depolymerization vd at which microtubules shrink and the rate r at which microtubules make the switch from growth to shrinking. For the flux model, vd is bounded by the measured flux velocity of 0.03 μm s−1, which is the value we prescribe. With this velocity having the switch from SMT to KMT be deterministic (that is, r goes to infinity) yields the best results. For the stochastic and selective detachment models, r and vd are a priori not known. We adjust them to yield best agreement between experiments and data. All of these values are summarized in Table 2.
The three models differ in the following aspects: In the flux model, upon becoming KMTs, KMT plus-ends switch deterministically to shrinking at a velocity vd=0.03 μm s−1. In the depolymerization model, both KMTs and SMTs can switch to depolymerizing from their minus-ends with a velocity vd at a rate r. In the detachment model, only KMTs can switch to depolymerizing from their minus-ends with a velocity vd at a rate r. While the flux model has no adjustable parameters, in the depolymerization and detachment models the rate r and the velocity vd are unknown. Requiring the ratio of SMTs to KMTs to match experiments and mimicking the shape of the experimentally observed KMT length distribution set both rates.
To compare the outputs of our simulations to the experimental data, we run the simulation sufficiently long to reach a steady state, and then average over a large number of subsequent steady-state configurations, sampled every 30 s to obtain an expectation value and standard deviations for the extracted distributions.
We also extracted predictions for the time course of FRAP experiments from each of our models. In these numerical experiments, we specify the position and width of the bleached box, and track the positions of all microtubule segments, bleached or unbleached, that are inside this box. We then calculate the fraction S(t) of unbleached MTs t time units after the bleaching event. This fraction is given by S(t)=[M(t)−B(t)]/M(t), where M(t) is the total mass of microtubules inside the box at time t, and B(t) is the total mass of bleached material remaining at time t. We compare S(t) directly with the normalized fluorescence intensities from our FRAP measurements (Fig. 6g and Supplementary Figs 9d and 10d).
The data and computer code of this study are available from the corresponding authors upon request.
How to cite this article: Redemann, S. et al. C. elegans chromosomes connect to centrosomes by anchoring into the spindle network. Nat. Commun. 8, 15288 doi: 10.1038/ncomms15288 (2017).
Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Helmke, K. J., Heald, R. & Wilbur, J. D. Interplay between spindle architecture and function. Int. Rev. Cell Mol. Biol. 306, 83–125 (2013).
Wittmann, T., Hyman, A. & Desai, A. The spindle: a dynamic assembly of microtubules and motors. Nat. Cell Biol. 3, E28–E34 (2001).
Albertson, D. G. Formation of the first cleavage spindle in nematode embryos. Dev. Biol. 101, 61–72 (1984).
Melters, D. P., Paliulis, L. V., Korf, I. F. & Chan, S. W. Holocentric chromosomes: convergent evolution, meiotic adaptations, and genomic analysis. Chromosome Res. 20, 579–593 (2012).
Greenan, G. et al. Centrosome size sets mitotic spindle length in Caenorhabditis elegans embryos. Curr. Biol. 20, 353–358 (2010).
Winey, M. et al. Three-dimensional ultrastructural analysis of the Saccharomyces cerevisiae mitotic spindle. J. Cell Biol. 129, 1601–1615 (1995).
Hallen, M. A. & Endow, S. A. Anastral spindle assembly: a mathematical model. Biophys. J. 97, 2191–2201 (2009).
Loughlin, R., Heald, R. & Nedelec, F. A computational model predicts Xenopus meiotic spindle organization. J. Cell Biol. 191, 1239–1249 (2010).
Paul, R. et al. Computer simulations predict that chromosome movements and rotations accelerate mitotic spindle assembly without compromising accuracy. Proc. Natl Acad. Sci. USA 106, 15708–15713 (2009).
Brugues, J. & Needleman, D. Physical basis of spindle self-organization. Proc. Natl Acad. Sci. USA 111, 18496–18500 (2014).
Hayden, J. H., Bowser, S. S. & Rieder, C. L. Kinetochores capture astral microtubules during chromosome attachment to the mitotic spindle: direct visualization in live newt lung cells. J. Cell Biol. 111, 1039–1045 (1990).
Rieder, C. L. & Alexander, S. P. Kinetochores are transported poleward along a single astral microtubule during chromosome attachment to the spindle in newt lung cells. J. Cell Biol. 110, 81–95 (1990).
Heald, R. et al. Self-organization of microtubules into bipolar spindles around artificial chromosomes in Xenopus egg extracts. Nature 382, 420–425 (1996).
O'Connell, C. B., Loncarek, J., Kalab, P. & Khodjakov, A. Relative contributions of chromatin and kinetochores to mitotic spindle assembly. J. Cell Biol. 187, 43–51 (2009).
Tirnauer, J. S., Canman, J. C., Salmon, E. D. & Mitchison, T. J. EB1 targets to kinetochores with attached, polymerizing microtubules. Mol. Biol. Cell 13, 4308–4316 (2002).
Kitamura, E. et al. Kinetochores generate microtubules with distal plus ends: their roles and limited lifetime in mitosis. Dev. Cell 18, 248–259 (2010).
Bonaccorsi, S., Giansanti, M. G. & Gatti, M. Spindle self-organization and cytokinesis during male meiosis in asterless mutants of Drosophila melanogaster. J. Cell Biol. 142, 751–761 (1998).
Khodjakov, A., Cole, R. W., Oakley, B. R. & Rieder, C. L. Centrosome-independent mitotic spindle formation in vertebrates. Curr. Biol. 10, 59–67 (2000).
Goshima, G., Mayer, M., Zhang, N., Stuurman, N. & Vale, R. D. Augmin: a protein complex required for centrosome-independent microtubule generation within the spindle. J. Cell Biol. 181, 421–429 (2008).
Petry, S., Groen, A. C., Ishihara, K., Mitchison, T. J. & Vale, R. D. Branching microtubule nucleation in Xenopus egg extracts mediated by augmin and TPX2. Cell 152, 768–777 (2013).
Muller-Reichert, T., Greenan, G., O'Toole, E. & Srayko, M. The elegans of spindle assembly. Cell. Mol. Life. Sci. 67, 2195–2213 (2010).
Mitchison, T. J. et al. Bipolarization and poleward flux correlate during Xenopus extract spindle assembly. Mol. Biol. Cell. 15, 5603–5615 (2004).
Needleman, D. J. et al. Fast microtubule dynamics in meiotic spindles measured by single molecule imaging: evidence that the spindle environment does not stabilize microtubules. Mol. Biol. Cell 21, 323–333 (2010).
Brugues, J., Nuzzo, V., Mazur, E. & Needleman, D. J. Nucleation and transport organize microtubules in metaphase spindles. Cell 149, 554–564 (2012).
McDonald, K. L., O'Toole, E. T., Mastronarde, D. N. & McIntosh, J. R. Kinetochore microtubules in PTK cells. J. Cell Biol. 118, 369–383 (1992).
O'Toole, E. T. et al. Morphologically distinct microtubule ends in the mitotic centrosome of Caenorhabditis elegans. J. Cell Biol. 163, 451–456 (2003).
McIntosh, J. R. et al. Conserved and divergent features of kinetochores and spindle microtubule ends from five species. J. Cell Biol. 200, 459–474 (2013).
McEwen, B. F., Hsieh, C. E., Mattheyses, A. L. & Rieder, C. L. A new look at kinetochore structure in vertebrate somatic cells using high-pressure freezing and freeze substitution. Chromosoma 107, 366–375 (1998).
Chandler, D. Introduction to Modern Statistical Mechanics Oxford University Press (1987).
Mitchison, T. & Kirschner, M. Dynamic instability of microtubule growth. Nature 312, 237–242 (1984).
Mitchison, T. & Kirschner, M. Microtubule assembly nucleated by isolated centrosomes. Nature 312, 232–237 (1984).
Dogterom, M. & Leibler, S. Physical aspects of the growth and regulation of microtubule structures. Phys. Rev. Lett. 70, 1347–1350 (1993).
O'Toole, E., Greenan, G., Lange, K. I., Srayko, M. & Muller-Reichert, T. The role of γ-tubulin in centrosomal microtubule organization. PLoS ONE 7, e29795 (2012).
Muller-Reichert, T., Chretien, D., Severin, F. & Hyman, A. A. Structural changes at microtubule ends accompanying GTP hydrolysis: information from a slowly hydrolyzable analogue of GTP, guanylyl (alpha,beta)methylenediphosphonate. Proc. Natl Acad. Sci. USA 95, 3661–3666 (1998).
Chretien, D., Fuller, S. D. & Karsenti, E. Structure of growing microtubule ends: two-dimensional sheets close into tubes at variable rates. J. Cell Biol. 129, 1311–1328 (1995).
Mandelkow, E. M., Mandelkow, E. & Milligan, R. A. Microtubule dynamics and microtubule caps: a time-resolved cryo-electron microscopy study. J. Cell Biol. 114, 977–991 (1991).
O'Connell, K. F. et al. The C. elegans zyg-1 gene encodes a regulator of centrosome duplication with distinct maternal and paternal roles in the embryo. Cell 105, 547–558 (2001).
Srayko, M., Kaya, A., Stamford, J. & Hyman, A. A. Identification and characterization of factors required for microtubule growth and nucleation in the early C. elegans embryo. Dev. Cell 9, 223–236 (2005).
Mastronarde, D. N., McDonald, K. L., Ding, R. & McIntosh, J. R. Interpolar spindle microtubules in PTK cells. J. Cell Biol. 123, 1475–1489 (1993).
Peterman, E. J. & Scholey, J. M. Mitotic microtubule crosslinkers: insights from mechanistic studies. Curr. Biol. 19, R1089–R1094 (2009).
Labbe, J. C., McCarthy, E. K. & Goldstein, B. The forces that position a mitotic spindle asymmetrically are tethered until after the time of spindle assembly. J. Cell Biol. 167, 245–256 (2004).
Garzon-Coral, C., Fantana, H. A. & Howard, J. A force-generating machinery maintains the spindle at the cell center during mitosis. Science 352, 1124–1127 (2016).
Grill, S. W., Gonczy, P., Stelzer, E. H. & Hyman, A. A. Polarity controls forces governing asymmetric spindle positioning in the Caenorhabditis elegans embryo. Nature 409, 630–633 (2001).
Dumont, J., Oegema, K. & Desai, A. A kinetochore-independent mechanism drives anaphase chromosome separation during acentrosomal meiosis. Nat. Cell Biol. 12, 894–901 (2010).
Srayko, M., O’Toole, E. T., Hyman, A. A. & Muller-Reichert, T. Katanin disrupts the microtubule lattice and increases polymer number in C. elegans meiosis. Curr. Biol. 16, 1944–1949 (2006).
Sikirzhytski, V. et al. Direct kinetochore-spindle pole connections are not required for chromosome segregation. J. Cell Biol. 206, 231–243 (2014).
Elting, M. W., Hueschen, C. L., Udy, D. B. & Dumont, S. Force on spindle microtubule minus ends moves chromosomes. J. Cell Biol. 206, 245–256 (2014).
Shinar, T., Mana, M., Piano, F. & Shelley, M. J. A model of cytoplasmically driven microtubule-based motion in the single-celled Caenorhabditis elegans embryo. Proc. Natl Acad. Sci. USA 108, 10508–10513 (2011).
Fuge, H. The three-dimensional architecture of chromosome fibres in the crane fly. II. Amphitelic sex univalents in meiotic anaphase I. Chromosoma 91, 322–328 (1985).
Schibler, M. J. & Pickett-Heaps, J. D. Mitosis in Oedogonium: spindle microfilaments and the origin of the kinetochore fiber. Eur. J. Cell. Biol. 22, 687–698 (1980).
Oegema, K., Desai, A., Rybina, S., Kirkham, M. & Hyman, A. A. Functional analysis of kinetochore assembly in Caenorhabditis elegans. J. Cell Biol. 153, 1209–1226 (2001).
Nahaboo, W., Zouak, M., Askjaer, P. & Delattre, M. Chromatids segregate without centrosomes during Caenorhabditis elegans mitosis in a Ran- and CLASP-dependent manner. Mol. Biol. Cell 26, 2020–2029 (2015).
Brenner, S. The genetics of Caenorhabditis elegans. Genetics 77, 71–94 (1974).
Gusnowski, E. M. & Srayko, M. Visualization of dynein-dependent microtubule gliding at the cell cortex: implications for spindle positioning. J. Cell Biol. 194, 377–386 (2011).
Timmons, L. & Fire, A. Specific interference by ingested dsRNA. Nature 395, 854 (1998).
Pelletier, L., O'Toole, E., Schwager, A., Hyman, A. A. & Muller-Reichert, T. Centriole assembly in Caenorhabditis elegans. Nature 444, 619–623 (2006).
Muller-Reichert, T., Srayko, M., Hyman, A., O'Toole, E. T. & McDonald, K. Correlative light and electron microscopy of early Caenorhabditis elegans embryos in mitosis. Methods Cell. Biol. 79, 101–119 (2007).
Mastronarde, D. N. Dual-axis tomography: an approach with alignment methods that preserve resolution. J. Struct. Biol. 120, 343–352 (1997).
Kremer, J. R., Mastronarde, D. N. & McIntosh, J. R. Computer visualization of three-dimensional image data using IMOD. J. Struct. Biol. 116, 71–76 (1996).
Gilbert, P. F. The reconstruction of a three-dimensional structure from projections and its application to electron microscopy. II. Direct methods. Proc. R. Soc. Lond. B Biol. Sci. 182, 89–102 (1972).
Stalling, D., Westerhoff, M. & Hege, H.-C. in The Visualization Handbook. (eds Hansen, C. D. & Johnson, C. R.) 749–767 (Elsevier, 2005).
Weber, B. et al. Automated stitching of microtubule centerlines across serial electron tomograms. PLoS ONE 9, e113222 (2014).
Weber, B. et al. Automated tracing of microtubules in electron tomograms of plastic embedded samples of C. elegans embryos. J. Struct. Biol. 178, 129–138 (2012).
Crocker, J. C. & Grier, D. G. Methods of digital video microscopy for colloidal studies. J. Colloid Interface Sci. 179, 298–310 (1996).
We thank Drs D. Needleman, S. Roldán-Vargas, F. Jülicher and A.A. Hyman for discussions. We are also grateful to M. Merkel for microtubule segmentation and the electron microscopy facility at MPI-CBG (Dresden) for technical assistance. The Müller-Reichert lab received funding from the Human Frontier Science Programme (RGP 0034/2010), the German Research Foundation (DFG Grant MU 1423/8-1) and from the Saxonian State Ministry for Science and the Arts (SMWK). J. Baumgart received funding from the European Comission’s 7th framework Programme grant Systems Biology of Mitosis (FP7_HEALTH-2009-241548/MitoSys). The Brugués lab acknowledges funding from the Human Frontier Science Programme (CDA 74/2014). S. Prohaska was funded by the German Research Foundation (DFG Grant PR 1226/4-1) and the FEI Visualization Sciences Group. The Shelley lab acknowledges support from the (USA) National Institutes of Health (1R01GM104976-01), the National Science Foundation (DMS-1463962), and the Human Frontiers Science Programme for support of S. Fürthauer.
The authors declare no competing financial interests.
Supplementary Figures and Supplementary Tables (PDF 20327 kb)
Visualization of the 3D reconstruction of a complete metaphase spindle in the early C. elegans embryo. This full reconstruction (corresponding to Figure 1a) shows KMTs in red, and both AMTs and SMTs in green. The segmentation of the chromosomes is shown in blue. (MOV 11290 kb)
Close up-view of the chromosome region of a metaphase spindle in the early C. elegans embryo. This movie (corresponding to Figure 1a) shows a close up-view of the microtubules around the metaphase plate. The rotation around the spindle axis shows KMTs in red, and both AMTs and SMTs in green. Chromosomes are visualized in blue. (MOV 10183 kb)
Visualization of microtubule plus-end growth in the metaphase spindle by EBP-2::GFP. This movie (corresponding to Figure 4a,b) shows two examples of the motion of EBP-2::GFP comets in metaphase of the early C.elegans embryo. The exposure is 150 ms, the frame rate is 5 frames per second. (AVI 2236 kb)
Fluorescence recovery after photobleaching (FRAP) in C. elegans metaphase. The FRAP experiment (corresponding to Figure 4c) in a histone::GFP and β-tubulin::GFP tagged C. elegans embryo in metaphase shows the recovery of the bleachmark over time. The exposure time is 100 ms, the frame rate is 2 frames per second. (MOV 21 kb)
Laser microsurgery in the C. elegans metaphase spindle. Laser microsurgery in a β-tubulin::GFP tagged C. elegans embryos was applied to induce the formation of novel microtubule plus and minus-ends. A single wave of microtubule depolymerisation can be observed. The exposure time is 300 ms and the frame rate is 1 frame every 5 seconds. (MOV 94 kb)
About this article
Cite this article
Redemann, S., Baumgart, J., Lindow, N. et al. C. elegans chromosomes connect to centrosomes by anchoring into the spindle network. Nat Commun 8, 15288 (2017). https://doi.org/10.1038/ncomms15288
This article is cited by
Nature Reviews Methods Primers (2022)
Nature Physics (2022)
Cellular and Molecular Life Sciences (2021)
Nature Reviews Molecular Cell Biology (2020)
Kinesin-14 motors drive a right-handed helical motion of antiparallel microtubules around each other
Nature Communications (2020)