Self-assembly of multiple building blocks via hydrogen bonds into well-defined nanoconstructs with selective binding function remains one of the foremost challenges in supramolecular chemistry. Here, we report the discovery of a enantiopure nanocapsule that is formed through the self-assembly of eight amino acid functionalised molecules in nonpolar solvents through 48 hydrogen bonds. The nanocapsule is remarkably robust, being stable at low and high temperatures, and in the presence of base, presumably due to the co-operative geometry of the hydrogen bonding motif. Thanks to small pore sizes, large internal cavity and sufficient dynamicity, the nanocapsule is able to recognize and encapsulate large aromatic guests such as fullerenes C60 and C70. The structural and electronic complementary between the host and C70 leads to its preferential and selective binding from a mixture of C60 and C70.
Multimembered, three-dimensional chemical entities such as cages or capsules are complex architectures that can be constructed using self-assembly processes where building blocks are held together by dynamic covalent or non-covalent bonds. The continuing development of supramolecular chemistry and the improved understanding of its underlying assembly processes have led to the synthesis of increasingly complex and sophisticated three-dimensional structures such as nanotubes1, cages2,3 and capsules4,5,6. There is a close relationship between the structure of a given architecture and its functionality, as in natural systems, and chemists have exploited this in the design of functional structures that possess desirable properties and that may be used inter alia to build molecular machines7.
Many viral genomes are hosted within hollow spherical protein capsules: self-assembly of these viral capsid is a complex process involving dynamic interactions between the participating protein subunits8. Despite the robust nature of the spherical capsid, achieved through number of conformational rearrangements, its dynamic nature, required to perform biological functions, is still preserved9.
The enclosed and protected spaces within capsules and cages are of particular interest because of their potential for selective encapsulation2,10 and catalysis by inclusion, examples being the ability to neutralize explosives11 or to separate enantiomers12. An established pathway to spherical structures involves the careful design and synthesis (often multi-stage) of an organic ligand with precisely spaced functional groups. Nanocapsules can be produced via reversible covalent bonds such as disulfide13,14, boronic esters15,16 and imines17,18,19,20,21,22 or supramolecular interactions such as coordinative bonds23,24,25,26 and hydrogen bonding27,28,29,30,31, the last being exemplified in the present work.
The vast majority of hydrogen-bonded capsules are dimeric species which are constructed and/or exist only in the presence of stabilising template molecules10,32. The formation of multimembered architectures via hydrogen bonds is much more challenging and rare, in part due to the potentially prohibitive entropic cost of creating large ordered objects30,33,34. Furthermore, hydrogen bonds are by nature dynamic linkages so self-assembled nanocapsules based on this interaction are generally fragile, particularly in solution at high temperatures or in the presence of a disruptive entity such as a base. Therefore, the use of chemical self-assembly process in the efficient generation of highly stable nanocapsular and multimembered objects with preserved function in selective guest binding has not been much explored.
Taking inspiration from natural systems we report here the discovery of a newly designed multimembered nanocapsule that is formed as a product of a self-assembly process in a nonpolar solvent. The capsule is based on the generation of 48 hydrogen bonds between 8 identical enantiomerically pure building blocks that consists of an aromatic ring with three attached amino acid residues acting as both H-bond acceptors and donors. This design of the molecular substrate has provided a supramolecular nanocapsule with a precisely defined size and shape as well as an outstanding thermal and chemical stability in solution. In contrast to the previously described system based on the same central aromatic platform32, the formation of the capsule is independent of the presence of stabilizing template molecules. Thanks to small pore sizes, large internal cavity and sufficient dynamicity, the presented nanocapsule has been found to selectively recognize and encapsulate large aromatic guests such as fullerenes C60 and C70. The selective encapsulation of the latter is particularly attractive, since their large scale separation is difficult35.
The synthesis of L-1, D-1 and L-2 followed a literature procedure13 involving reaction of an activated ester of benzene-1,3,5-tricarboxylic acid with the corresponding trityl-protected cysteine (Fig. 1, See Supplementary Methods section for details). In each case the two step procedure gave enantiomerically pure materials in high yields. It became obvious subsequently that the trityl group plays significant role in the generation of a three-dimensional architecture. The presence of this protecting group on the cysteine side chains was expected to enhance both the solubility and the stability of the hydrogen-bonded assembly, as a consequence of creation of a more nonpolar environment, which would raise the pKa in a manner that is reminiscent of carboxylic groups in enzyme active sites36. Additionally, the robust crystallization properties of many compounds with trityl groups have led to the suggestion that their presence may boost the chances to obtain good quality crystals for X-ray analysis37.
Solid state characterization of the nanocapsule
Slow evaporation of chloroform solution of L-1 resulted in the isolation of blocked-shaped light yellow crystals. Structural confirmation for L-1 was provided by single-crystal X-ray crystallographic analysis. The compound L-1 crystallizes in the tetragonal space group P42212. The analysis was complicated by disorder of trityl groups near the crystallographic twofold axis (special positions). The key to a successful refinement was utilization of stereochemical restraints for the L-1 structure, which were generated by the GRADE programme38. This macromolecular refinement technique has been adapted to be used in the programme SHELXL (refs 39, 40). We have already used this methodology for other supramolecular structures41, and it was found to drastically increase the robustness of the refinement, especially when combined with the new rigid bond restraint in SHELXL (RIGU)42. The programme ShelXle (ref. 43), which supports the macromolecular residue grouping, was used as a Graphical User Interface whereas the DSR programme was employed to model disordered moieties44. As shown in Fig. 2a,b, the crystal structure revealed that all the aromatic rings of the trityl groups are situated on the same side of the 1,3,5-benzene core, despite the steric hindrance, directing the three carboxylate groups in the opposite direction. Further analysis of the crystal structure reveals that L-1 assembles through complementary and metrically matched hydrogen bonds to form an octameric supramolecular nanocapsule (Fig. 2c).
The data collection of the L-1 nanocapsule structure posed typical difficulties observed for complex supramolecular structures with large percentage of void space containing unordered chloroform solvent molecules. Crystals were extremely volatile and decomposed or cracked within a couple of a few seconds after being taken out of the mother liquor. We attributed this phenomenon to the rapid loss of chloroform, which was used as crystallization solvent. The asymmetric unit contains two L-1 molecules and the full nanocapsule is generated by crystallographic symmetry elements. The point group symmetry of the capsule in the crystal structure is D2 after Schoenflies (222 after Hermann-Mauguin). The cavity volume was calculated to be 1,719 Å3 (1.7 nm3) using a 3.0 Å probe in the void space calculation using VOIDOO (Fig. 3a)45. To prevent the probe from ‘escaping’ the inner sphere through the large pores, the default probe radius of 1.4 Å (water) was increased to 3.0 Å. This results in smaller calculated volumes compared to using the default probe size, but provides the additional information that all molecules with diameter of 2.9 Å or smaller can penetrate the capsule. In the solid state no chloroform site could be identified inside the capsule. We assume that solvent molecules, are dynamically disordered inside the capsule and therefore do not produce a distinct signal in the X-ray measurement.
The external surface of the octameric nanocapsule based on L-1 is not fully enclosed. As shown in Fig. 3b, the supramolecular assembly contains six pores of two types: A (four, each with diameter of 7.33 Å × 7.40 Å) and B (two, each with diameter 7.37 Å × 8.75 Å). The A-type pores are located along the equator of the nanocapsule, whereas B-type pores are placed at the ‘poles’ of the assembly.
Nuclear magnetic resonance (NMR) spectroscopic analyses in solution were in agreement with the solid-state data, confirming that the nanocapsule is retained in solution. Based on our earlier precedent of supramolecular nanotubes1, we investigated the NMR properties of L-1, D-1 and L-2 in different solvents. The 1H NMR spectra in DMSO-d6, an exceptionally strong H-bond acceptor, are unremarkable, displaying the expected C3 symmetry (L-1 Fig. 4a, for D-1 see Supplementary Fig. 2). This solvent completely disrupts any inter- (or intra-) molecular H-bonds, creating a solvated monomer in which any conformational interconversions are sufficiently rapid to lead to the expected C3 symmetry on the NMR chemical shift timescale.
The NMR spectrum of L-1, is significantly different in 1,1,2,2-tetrachloroethane (TCE-d2), a solvent that does not disrupt intermolecular H-bonding (Fig. 4b, for D-1 see Supplementary Fig. 7). Now the spectrum is consistent with the effective C2 symmetry (ignoring disorder) of the octameric species seen in the lattice of the crystal obtained from chlorinated solvents, implying that the octamer is indeed preserved in TCE-d2 solution; the apparent 2:1 intensities ∼4.5 and 8.0 p.p.m. are due to accidental coincidences at ambient temperature which are removed on heating or cooling (see below). Analogous results were observed in the 13C NMR spectra of L-1 in DMSO-d6 and TCE-d2, which reveal the same symmetry properties as those obtained by the 1H NMR analysis (see Supplementary Figs 9,10 and 12). The symmetry of the nanocapsules exhibited in these spectra corresponds to eight equivalent monomers, each having three non-equivalent functional arms.
The affinity for self-recognition (narcissistic self-sorting) between the nanocapsule subunits presenting opposite chirality at the α-carbon (L-1 and D-1) has been investigated. The 1H NMR spectrum of an equimolar mixture of both molecules (L-1 and D-1) in TCE-d2 was compared to that containing only L-1. Both spectra were found to be essentially identical without shifts and/or appearance of any new peaks (Supplementary Fig. 27a). This observation implies that the subunit, composed of either all-L- or all-D-amino acids is dictating the chirality of the assembly, leading in effect to the exclusive formation of the enantiopure nanocapsule (in contrast to the corresponding experiment in the Mastelerz et al. octameric capsule system, ref. 31). It also demonstrates that the homochiral nanocapsule is thermodynamically the most stable accessible structure. This result was further supported by the circular dichroism spectroscopy studies where equimolar mixture of all-L- and all-D subunits self-sort to give the nanocapsule in racemic form (Supplementary Fig. 27b). Since the enantiomerically pure capsules are formed from both L-1 and D-1, we focused our further analysis on L-1 which derive from natural cysteine isomer.
To explain the splitting effect observed, in both 1H and 13C NMR spectra, detailed analysis of the crystal structure was performed. Due to the structural features of the nanocapsule (four equatorial and two pairs of two polar building blocks), each arm of the monomer is located in a slightly different environment. This effect is most apparent when analysing the solid-state structure, where significant differences in the hydrogen bonding distances between functional arms in the monomer are observed (Supplementary Fig. 26). The differences in distances of hydrogen bonds directly affect their strength and will have an impact on the chemical shifts found in both 1H and 13C NMR spectra. This is visible when looking at the hydrogen bonding distances between aromatic central core protons and the carbonyl groups. In this case, two distances are found to be very similar (2.319 and 2.301 Å), while the third is significantly larger (2.423 Å). The proton in the latter case experiences a weaker shielding effect as observed in the NMR spectrum. The opposite H-bond distance desymmetrisation effect was observed for the amide N-H groups. Of the three amide protons, one is located substantially closer to the nearest H-bonding acceptor, leading to increased H-bond energy and deshielding of this proton signal. Both effects are fully consistent with the NMR spectra presented in Fig. 3b and S12 (see ESI). The higher order steric effects seen in the crystal structure (Supplementary Fig. 26) are unfortunately quenched in the solution studies by dynamic breathing motions of the capsule. The splitting of the different proton resonances of the monomer into three groups in 1:1:1 ratio, consistent with three-fold symmetry, is also clearly evident in the EASY-ROESY spectrum, where no exchange peaks are observed, suggesting that each of eight monomers of the nanocapsule is effectively equivalent (Supplementary Fig. 20). As a control, the NMR spectrum of L-2 in TCE-d2 is simple and conventional as expected because the ester group is unable to generate the hydrogen bonds required for formation of the supramolecular nanocapsule (Supplementary Fig. 8).
The formation of unique and discrete supramolecular octameric nanocapsules from either L-1 and D-1 is further supported by diffusion ordered spectroscopy experiments (Fig. 5 for L-1, for D-1 see Supplementary Fig. 22). Using the Stokes-Einstein equation, the solvodynamic diameter of the nanocapsules has been found to be 18.2 Å (observed diffusion coefficients 8.31 and 8.20 × 10−11 (m2 s−1) for L-1 and D-1, respectively), which is consistent with the diameters provided by single-crystal X-ray crystallographic analysis of L-1 (19.4 Å along X axis and 16.2 Å along Y axis without trityl moieties, respectively and 29.4 and 25.5 Å with them). In contrast, the solvodynamic diameter for molecule L-2, which is unable to form capsular assembly has been found to be 10.59 Å (observed diffusion coefficient 1.42 × 10−10 (m2 s−1), see Supplementary Fig. 23).
Thermodynamic stability of the nanocapsule
We next tested the thermodynamic stability of the nanocapsule with VT NMR and base (Et3N) titration experiments. As shown in Fig. 6a the supramolecular structure is stable over a wide range of temperatures (from −10 °C up to 105 °C), exceptional behaviour for a purely H-bonded supramolecular oligomer. Furthermore, the supramolecular structure was also resistant to base (Fig. 6b). In principle, removal of the carboxylic acid protons should prevent H-bonding and thus lead to decomposition of the capsule, but more than 40 equiv. of triethylamine (1.66 equiv. per carboxyl group) at 318 K were required to produce a spectrum showing the C3 symmetry of the monomeric anion. The stability of this capsule clearly derives from highly co-operative hydrogen bonding interactions between donor and acceptor groups in neighbouring monomers. In principle, abolition of one hydrogen bond by deprotonation might be expected to lead to loss of that monomer unit from the capsule, but the enthalpic cost of rupturing additional H-bonds would be very large. This reinforcement of weak interactions by geometrical constraints is reminiscent of that observed in other systems such as the trefoil knot reported by one of us46 and Moore’s recent kinetically-trapped tetrahedral cages47.
Host–guest chemistry and selective binding of fullerenes
The nanocapsule of L-1 presents an internal cavity suitable for encapsulating guest molecules through supramolecular interactions. We anticipated that the presence of large pores (the largest sphere that could freely pass through these pores would have a van der Waals radius of ∼4 Å) combined with a huge internal void cavity (1,719 Å3) might allow the free penetration of the capsule by relatively small molecules such as solvents, while guest molecules with diameter bigger than 8 Å may be considered for binding studies inside the capsule. We reasoned that the aromatic surfaces lining the cavity of the nanocapsule might lead to binding of large preferentially spherical aromatic guests. After topological, structural and electronic analysis of both the nanocapsule and potential guests, C60 and C70 fullerenes were selected for the binding studies. The use of supramolecular receptors for fullerene separation in solution has emerged as an attractive alternative to often tedious, energy- and time-consuming chromatographic techniques, since it allows potential selectivity, does not require specific equipment and ideal recyclable hosts can be designed. Since both fullerenes C60 and C70 are devoid of hydrogen atoms, the most convenient way to study their binding inside the nanocapsule is 13C NMR analysis. The 13C NMR resonance signal of free C60 in TCE-d2 was recorded at 142.85 p.p.m. (Supplementary Fig. 13). During the addition of the L-1 nanocapsule to a saturated solution of C60 in TCE-d2, a new upfield signal appeared at 140.77 p.p.m., originating from the host–guest complex (|δfullerene−δguest|=2.08 p.p.m., Supplementary Fig. 13). The large upfield shift indicates that C60 resides within the shielded interior of the cavity composed of 8 molecules of L-1 and it is in good agreement with values observed for the previously reported fullerene receptor based on double-calix arene48 and our supramolecular nanotube1.
A similar encapsulation result was obtained for C70 fullerene, whose five 13C NMR signals (150.32, 147.76, 146.50, 145.00 and 130.53 p.p.m.) were also found to be shifted towards higher magnetic field by about 2 p.p.m. when mixed with the nanocapsule (Supplementary Fig. 14); intriguingly more than five shifted signals are observed (8 in total) presumably due to the reduced effective symmetry experienced within the chiral cavity of the nanocapsule. From the diameters calculated on the basis of the X-ray structures of both the nanocapsule (15.9 × 16.9 Å) and fullerenes C60 (10.3 × 10.3 Å) and C70 (10 × 11.3 Å) we anticipated that in both cases 1:1 complex are formed (Fig. 7a,b). The binding process between fullerene guests (C60 and C70) and the L-1 nanocapsule was followed by ultraviolet–visible titration in TCE at 26 °C (Supplementary Fig. 28, see Supplementary Methods for details); both C60 and C70 were observed to form 1:1 host–guest complexes with the L-1 nanocapsule in TCE. The guest binding strength was found to be 7.6 × 101 M−1 and 1.0 × 103 M−1 for C60 and C70, respectively. The encapsulation of fullerene molecules must involve temporary opening of the L-1 nanocapsule to allow guest entry followed by the receptor’s reassembly. To further illustrate the potential of this system, we employed the two fullerene guests together in a competition experiment (Fig. 7c). Based on the binding studies with C60 and C70 inside nanocapsule derived from L-1, an experimental set-up was designed to use the latter in the selective binding and separation of C60 and C70. The binding study between equimolar amounts of the capsule with C60 and C70 fullerenes was followed by 13C NMR spectroscopy and showed preferential formation of the complex with C70 over that of the C60 (signals indicative of the encapsulated C70 between δ=148–142 p.p.m. and 128 p.p.m., see Supplementary Fig. 15). We infer that the difference in the shape of the guest molecules might be the origin of the observed selectivity, as the host–guest interactions are very similar in both cases. Both fullerenes are based on the extended π-system and contain carbon atoms with sp2 hybridization, however, unlike the ideally spherical C60, C70 has ellipsoidal shape. Since the supramolecular host is also slightly elongated along one axis, it seems that there is a perfect electronic and more importantly structural complementarity between the C70 and the nanocapsule leading to the guest selectivity through more effective and stronger interactions (π-stacking) between them.
In conclusion, we describe for the first time the generation of a new capsid-like purely organic spheroidal assembly consisting of eight monomers analogous to the proteins that form spherical virus capsids. The self-assembly process depends on the formation of 48 hydrogen bonds between carboxyl and amine moieties of adjacent molecules. This remarkably complex three-dimensional architecture discovered in the solid state persists also in chlorinated solvents. We believe this is the largest purely synthetic and enantiopure spheroid formed through co-operative non-covalent interactions. The cooperativity of hydrogen bonding is imposed by the geometry, conferring outstanding temperature stability and resistance to base. Utilization of the self-assembly process in the generation of efficient and specific receptors for selected guests is an important part of supramolecular chemistry with potential applications in nanotechnology and in material and separation sciences. We demonstrated that this new nanocapsule acts as selective receptor for fullerenes C60 and C70 and facilitates the selective binding and extraction of latter one from the mixture of two. Most of the alternative methods for fullerene separation and purification are only selective towards the major component C6049; examples in the literature in which C70 are preferred are scarce. Although a few examples of C70 and C60 fullerenes and receptors have been reported, they were mainly based on the dimeric structures50, or metal-ligand coordinative bonds49,51,52,53,54. The presented system consist on purely organic and multimembered spheroidal architecture and for reasons of synthetic economy it provides a major advantage since only one molecule is needed to generate selective receptor for fullerenes. This discovery represent a major advance in the field of hydrogen-bonded assemblies, not only through their synthesis, but also by being versatile in their room for structural variation and possible side chain decoration on the surface in a manner reminiscent of phage display. Despite the enormous progress in the research on hydrogen-bonded structures, our results present a new perspective on the generation of highly dynamic supramolecular system where the repetition of the same subunits provide access to topologically complex functional nanostructure. The large enclosed free volume offered by this supramolecular assembly has also potential utility for catalysis and transport that we intend to explore.
Crystallographic data including structure factors have been deposited with CCDC no. 1469874. Copies of the data can be obtained free of charge at the CCDC website http://www.ccdc.cam.ac.uk/structures. All other data is available from the authors upon reasonable request.
How to cite this article: Markiewicz, G. et al. Selective C70 encapsulation by a robust octameric nanospheroid held together by 48 cooperative hydrogen bonds. Nat. Commun. 8, 15109 doi: 10.1038/ncomms15109 (2017).
Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Stefankiewicz, A. R., Tamanini, E., Pantos, G. D. & Sanders, J. K. M. Proton-driven switching between receptors for C(60) and C(70) . Angew. Chem. Int. Ed. 50, 5724–5727 (2011).
Custelcean, R. Anion encapsulation and dynamics in self-assembled coordination cages. Chem. Soc. Rev. 43, 1813–1824 (2014).
Mastalerz, M. Shape-persistent organic cage compounds by dynamic covalent bond formation. Angew. Chem. Int. Ed. 49, 5042–5053 (2010).
Adriaenssens, L. & Ballester, P. Hydrogen bonded supramolecular capsules with functionalized interiors: the controlled orientation of included guests. Chem. Soc. Rev. 42, 3261–3277 (2013).
Jędrzejewska, H., Wierzbicki, M., Cmoch, P., Rissanen, K. & Szumna, A. Dynamic formation of hybrid peptidic capsules by chiral self-sorting and self-assembly. Angew. Chem., Int. Ed. 53, 13760–13764 (2014).
Jiang, W. & Rebek, J. Guest-induced, selective formation of isomeric capsules with imperfect walls. J. Am. Chem. Soc. 134, 17498–17501 (2012).
Erbas-Cakmak, S., Leigh, D. A., McTernan, C. T. & Nussbaumer, A. L. Artificial molecular machines. Chem. Rev. 115, 10081–10206 (2015).
Mateu, M. G. Assembly, stability and dynamics of virus capsids. Arch. Biochem. Biophys. 531, 65–79 (2013).
Douglas, T. & Young, M. Viruses: making friends with old foes. Science 312, 873 (2006).
Tiefenbacher, K., Ajami, D. & Rebek, J. Self-assembled capsules of unprecedented shapes. Angew. Chem. Int. Ed. 50, 12003–12007 (2011).
Mal, P., Breiner, B., Rissanen, K. & Nitschke, J. R. White phosphorus is air-stable within a self-assembled tetrahedral capsule. Science 324, 1697–1699 (2009).
Liu, T. F., Liu, Y., Xuan, W. M. & Cui, Y. Chiral nanoscale metal-organic tetrahedral cages: diastereoselective self-assembly and enantioselective separation. Angew. Chem. Int. Ed. 49, 4121–4124 (2010).
Stefankiewicz, A. R., Sambrook, M. R. & Sanders, J. K. M. Template-directed synthesis of multi-component organic cages in water. Chem. Sci. 3, 2326–2329 (2012).
Stefankiewicz, A. R. & Sanders, J. K. M. Diverse topologies in dynamic combinatorial libraries from tri- and mono-thiols in water: sensitivity to weak supramolecular interactions. Chem. Commun. 49, 5820–5822 (2013).
Zhang, G., Presly, O., White, F., Oppel, I. M. & Mastalerz, M. A shape-persistent quadruply interlocked giant cage catenane with two distinct pores in the solid state. Angew. Chem. 53, 5126–5130 (2014).
Zhang, G., Presly, O., White, F., Oppel, I. M. & Mastalerz, M. A permanent mesoporous organic cage with an exceptionally high surface area. Angew. Chem. 53, 1516–1520 (2014).
Liu, Y., Liu, X. & Warmuth, R. Multicomponent dynamic covalent assembly of a rhombicuboctahedral nanocapsule. Chemistry 13, 8953–8959 (2007).
Mastalerz, M. One-pot synthesis of a shape-persistent endo-functionalised nano-sized adamantoid compound. Chem. Commun. 4756–4758 (2008).
Mastalerz, M., Schneider, M. W., Oppel, I. M. & Presly, O. A salicylbisimine cage compound with high surface area and selective CO2/CH4 adsorption. Angew. Chem. 50, 1046–1051 (2011).
Hong, S. et al. Porphyrin boxes: rationally designed porous organic cages. Angew. Chem. 54, 13241–13244 (2015).
Skowronek, P., Warzajtis, B., Rychlewska, U. & Gawronski, J. Self-assembly of a covalent organic cage with exceptionally large and symmetrical interior cavity: the role of entropy of symmetry. Chem. Commun. 49, 2524–2526 (2013).
Xu, D. & Warmuth, R. Edge-directed dynamic covalent synthesis of a chiral nanocube. J. Am. Chem. Soc. 130, 7520–7521 (2008).
Chakrabarty, R., Mukherjee, P. S. & Stang, P. J. Supramolecular coordination: self-assembly of finite two- and three-dimensional ensembles. Chem. Rev. 111, 6810–6918 (2011).
Bilbeisi, R. A., Ronson, T. K. & Nitschke, J. R. A self-assembled [FeII12L12] capsule with an icosahedral framework. Angew. Chem. Int. Ed. 52, 9027–9030 (2013).
Bivaud, S. et al. Tuning the size of a redox-active tetrathiafulvalene-based self-assembled ring. Beilstein J. Org. Chem. 11, 966–971 (2015).
Galan, A. & Ballester, P. Stabilization of reactive species by supramolecular encapsulation. Chem. Soc. Rev. 45, 1720–1737 (2016).
Biros, S. M. & Rebek, J. J. Structure and binding properties of water-soluble cavitands and capsules. Chem. Soc. Rev. 36, 93–104 (2007).
Liu, Y., Hu, C., Comotti, A. & Ward, M. D. Supramolecular archimedean cages assembled with 72 hydrogen bonds. Science 333, 436–440 (2011).
Zhang, K. D., Ajami, D. & Rebek, J. Hydrogen-bonded capsules in water. J. Am. Chem. Soc. 135, 18064–18066 (2013).
Atwood, J. L., Barbour, L. J. & Jerga, A. Hydrogen-bonded molecular capsules are stable in polar media. Chem. Commun. 2376–2377 (2001).
Beaudoin, D., Rominger, F. & Mastalerz, M. Chirality-assisted synthesis of a very large octameric hydrogen-bonded capsule. Angew. Chem. Int. Ed. 55, 15599–15603 (2016).
Pandurangan, K. et al. Unexpected self-sorting self-assembly formation of a [4:4] sulfate:ligand cage from a preorganized tripodal urea ligand. Angew. Chem. Int. Ed. 54, 4566–4570 (2015).
Račkauskaitė, D. et al. A remarkably complex supramolecular hydrogen-bonded decameric capsule formed from an enantiopure C2-Symmetric monomer by solvent-responsive aggregation. J. Am. Chem. Soc. 137, 10536–10546 (2015).
Ajami, D. & Rebek, J. Multicomponent, hydrogen-bonded cylindrical capsules. J. Org. Chem. 74, 6584–6591 (2009).
Garcia-Simon, C., Costas, M. & Ribas, X. Metallosupramolecular receptors for fullerene binding and release. Chem. Soc. Rev. 45, 40–62 (2016).
Harris, T. K. & Turner, G. J. Structural basis of perturbed pKa values of catalytic groups in enzyme active sites. IUBMB Life 53, 85–98 (2002).
Dance, I. & Scudder, M. Crystal supramolecularity: elaborate six-, eight- and twelve-fold concerted phenyl embraces in compounds [M(PPh3)3] and [M(PPh3)4]. New J. Chem. 22, 481–492 (1998).
Bricogne, G. et al. BUSTER Version 2.13.0 http://grade.globalphasing.orgGlobal Phasing Ltd (2016).
Sheldrick, G. M. Crystal structure refinement with SHELXL. Acta Cryst. C Struct. Chem. 71, 3–8 (2015).
Sheldrick, G. A short history of SHELX. Acta Cryst. A 64, 112–122 (2008).
Wise, M. D. et al. Large, heterometallic coordination cages based on ditopic metallo-ligands with 3-pyridyl donor groups. Chem. Sci. 6, 1004–1010 (2015).
Thorn, A., Dittrich, B. & Sheldrick, G. M. Enhanced rigid-bond restraints. Acta Cryst. A 68, 448–451 (2012).
Hubschle, C. B., Sheldrick, G. M. & Dittrich, B. ShelXle: a Qt graphical user interface for SHELXL. J. Appl. Crystallogr. 44, 1281–1284 (2011).
Kratzert, D., Holstein, J. J. & Krossing, I. DSR: enhanced modelling and refinement of disordered structures with SHELXL. J. Appl. Crystallogr. 48, 933–938 (2015).
Kleywegt, G. J. & Jones, T. A. Detection, delineation, measurement and display of cavities in macromolecular structures. Acta Cryst. D 50, 178–185 (1994).
Ponnuswamy, N., Cougnon, F. B. L., Clough, J. M., Pantoş, G. D. & Sanders, J. K. M. Discovery of an organic trefoil knot. Science 338, 783–785 (2012).
Lee, S., Yang, A., Moneypenny, T. P. & Moore, J. S. Kinetically trapped tetrahedral cages via alkyne metathesis. J. Am. Chem. Soc. 138, 2182–2185 (2016).
Yanase, M., Haino, T. & Fukazawa, Y. A self-assembling molecular container for fullerenes. Tetrahedron Lett. 40, 2781–2784 (1999).
García-Simón, C. et al. Sponge-like molecular cage for purification of fullerenes. Nat. Commun. 5, 5557 (2014).
Park, S. J. et al. Dimeric capsules with a nanoscale cavity for fullerene encapsulation. Chemistry 14, 5353–5359 (2008).
Brenner, W., Ronson, T. K. & Nitschke, J. R. Separation and selective formation of fullerene adducts within an MII8L6 cage. J. Am. Chem. Soc. 139, 75–78 (2017).
Danny Fox, O. et al. Nanosized polymetallic resorcinarene-based host assemblies that strongly bind fullerenes. J. Am. Chem. Soc. 128, 6990–7002 (2006).
Black, S. P. et al. Catenation and encapsulation induce distinct reconstitutions within a dynamic library of mixed-ligand Zn4L6 cages. Chem. Sci. 7, 2614–2620 (2016).
Wood, D. M. et al. Guest-induced transformation of a porphyrin-edged FeII4L6 capsule into a CuIFeII2L4 fullerene receptor. Angew. Chem. Int. Ed. 54, 3988–3992 (2015).
We thank National Centre for Research and Development (grant LIDER/024/391/L-5/13/NCBR/2014), Foundation for Polish Science (grant HOMING PLUS/2012-6/14) and Polish Ministry of Science and Higher Education (grant IUVENTUS PLUS 0446/IP3/2015/73) for financial support. We thank Dr Tanya K. Ronson for measuring the X-ray data and Diamond Light Source (UK) for synchrotron beamtime on I19 (MT7114). Prof Jack Harrowfield and Dr Sébastien Ulrich are thanked for useful discussions.
The authors declare no competing financial interests.
About this article
Cite this article
Markiewicz, G., Jenczak, A., Kołodziejski, M. et al. Selective C70 encapsulation by a robust octameric nanospheroid held together by 48 cooperative hydrogen bonds. Nat Commun 8, 15109 (2017). https://doi.org/10.1038/ncomms15109
Glucose Binding Drives Reconfiguration of a Dynamic Library of Urea‐Containing Metal–Organic Assemblies
Angewandte Chemie International Edition (2021)
Glucose Binding Drives Reconfiguration of a Dynamic Library of Urea‐Containing Metal–Organic Assemblies
Angewandte Chemie (2021)
Journal of Molecular Graphics and Modelling (2021)
Concentration‐Dependent Self‐Assembly of an Unusually Large Hexameric Hydrogen‐Bonded Molecular Cage
Chemistry – A European Journal (2021)
Coordination Chemistry Reviews (2021)