Article | Open

Structural basis for conductance through TRIC cation channels

Published online:


Mammalian TRICs function as K+-permeable cation channels that provide counter ions for Ca2+ handling in intracellular stores. Here we describe the structures of two prokaryotic homologues, archaeal SaTRIC and bacterial CpTRIC, showing that TRIC channels are symmetrical trimers with transmembrane pores through each protomer. Each pore holds a string of water molecules centred at kinked helices in two inverted-repeat triple-helix bundles (THBs). The pores are locked in a closed state by a hydrogen bond network at the C terminus of the THBs, which is lost when the pores assume an open conformation. The transition between the open and close states seems to be mediated by cation binding to conserved residues along the three-fold axis. Electrophysiology and mutagenesis studies show that prokaryotic TRICs have similar functional properties to those of mammalian TRICs and implicate the three-fold axis in the allosteric regulation of the channel.


As an essential secondary messenger in cellular signal transduction pathways, calcium ions (Ca2+) take part in important cellular functions including muscle contraction, cell growth and cell death1,2,3,4. The sarcoplasmic/endoplasmic reticulum (SR/ER) is a complex intracellular Ca2+-storage system5, from which ryanodine receptors (RyRs) and inositol 1,4,5-triphosphoate receptors (IP3Rs) serve as channels to release the flow of Ca2+ for muscle activation and other activities6,7,8,9,10,11,12,13. The efflux of Ca2+ from the SR leads to the accumulation of a transient negative potential within the SR/ER lumen, which would be expected to inhibit the process of the subsequent release of Ca2+ (refs 14, 15, 16). Therefore, robust counter-ion currents are vital to balance potential across the SR/ER membrane and to maintain efficient Ca2+ release and re-uptake15,16,17,18,19. Counter currents, such as K+, Mg2+ or Cl (refs 17, 20, 21, 22), are anticipated but which ion channels are involved has been debated23,24,25.

Miller and co-workers first identified and characterized K+ channel activity from SR membranes26,27. Subsequently, Takeshima and co-workers cloned, characterized and named the trimeric intracellular cation channel TRIC-A, suggesting that it would be likely to act as a counter-ion channel to neutralize the transient luminal negative charge caused by Ca2+ release from the intracellular stores23. Conductance properties observed for TRIC-A were similar to those of the previously identified SR K+ channels, except for a lack of sensitivity to decamethonium28. The relationship between TRIC channels and other SR K+ channels remains incompletely settled. However, an emerging concept is that TRIC subtypes form SR K+ channels29. As evidenced by the fact that their genetic ablation led to compromised K+ permeability and Ca2+ release across the SR/ER membrane30, TRICs play important roles as counter-ion channels for balancing the charge potential change during Ca2+ release/uptake in the intracellular stores31,32,33.

In mammals, TRIC channels have two isoforms with distinctive regulatory properties: TRIC-A is abundantly expressed in SR of excitable cells, while TRIC-B is expressed ubiquitously in ER of non-excitable cells23,32,33. Knockout mice lacking both TRIC-A and TRIC-B channels suffer from embryonic heart failure. Mutations in TRIC-A have been linked to hypertension and muscular diseases, whereas mutations in TRIC-B have been linked to bone and pulmonary diseases5,31,34. TRIC channels are selective for monovalent cations, with the permeability ratio being 1.5 for K+ over Na+ (ref. 23). TRIC channels are not homologous to any other channel characterized to date and hence may belong to a novel class of ion channels.

The mammalian TRIC proteins contain 300 amino acids and are characterized by a conserved N-terminal transmembrane (TM) domain and a diverse hydrophilic C-terminal tail of 60 amino acids. Initially, mammalian TRICs were predicted to contain three membrane-spanning segments23. However, a later analysis convincingly showed that these contained seven TM segments35. This analysis also brought the realization that TRIC homologues occur in other domains of life, including insects, algae, archaea and bacteria, identified as the UPF0126 family35. Interestingly, the prokaryotic homologues are shorter (210 residues), only containing the predicted TM domain of the eukaryotic counterpart. A systematic topological analysis indicated that the TRIC family might have arisen by duplication of an ancestral 3-TM segment followed by addition of a C-terminal segment to generate the eventual 7-TM protein35. To the best of our knowledge, no prokaryotic TRIC has been functionally characterized thus far, and detailed structural information is not available for any prokaryotic TRIC channel protein.

In this study, we analyse the structure and function of a bacterial and an archaeal TRIC channel. Both proteins have similar structures, consisting in symmetric trimers of 7-TM subunits, each composed as inverted quasi-repeats of triple-helix bundles (THBs) plus an added TM segment (TM7). Each subunit possesses an apparent ion conduction pathway, which in the structure at the highest resolution (1.6 Å) is marked by a string of water molecules. In the close state, the C-terminal THB is locked by a network of hydrogen bonds. This network is not observed in an alternative conformation where the pore is open. The transition between these conformations is associated with the binding of cations to a conserved site on the three-fold axis.


Sequence analysis of the TRIC-related proteins

Bioinformatics analysis revealed that eukaryotic TRICs were mainly from animals, none from plants, and only a few from green algae. To better understand how TRIC proteins are represented in the animal kingdom, which includes various vertebrates and invertebrates, we clustered 425 non-redundant sequences into a superfamily of animal TRICs at the PSI-BLAST level E≤10−3, then into two distinct families of vertebrate and invertebrate TRICs at an initial threshold of E≤10−60, and finally into subfamilies of TRIC-A and TRIC-B (for the vertebrate TRICs) at a typical initial thresholds of E≤10−90. We also analysed 100 non-redundant sequences from prokaryotes at the PSI-BLAST level E≤10−4. Details are in Supplementary Table 1.

Sequences identified as prokaryotic TRICs show a 7-TM pattern as for the eukaryotic TRICs. Moreover, the conservation patterns are substantially similar for the two groups even though pairwise sequence identity levels are low. A structure-based alignment of the human TRIC-A and TRIC-B sequences with two prokaryotic TRICs, chosen because structures were forthcoming for these, is shown in Fig. 1a where patterns of sequence conservation calculated from the individual groups of prokaryotic and eukaryotic TRICs are also compared.

Figure 1: Sequence analysis and characterization for the TRIC proteins.
Figure 1

(a) Structure-based sequence alignment of prokaryotic TRICs from SaTRIC, bacterial CpTRIC, and human TRIC-A and TRIC-B. The structures of both SaTRIC and CpTRIC have been used to restrict sequence gaps to inter-helical segments. Superior coils define extents of the helical segments; boxes are drawn for the highly conserved GGG signature motifs; red letters mark residues in the prokaryotic TRIC that are involved in the ion conduction pathway; and the coloured inferior bar encodes ConSurf sequence variability54 for the prokaryotic TRIC of 100 non-redundant proteins (top) and eukaryotic TRIC of 169 non-redundant proteins (bottom). (b) Crosslinking of purified SaTRIC and CpTRIC in detergent micelles. The purified proteins were incubated with increasing amounts of glutaraldehyde, and samples were analysed by SDS–PAGE. SaTRIC showed gradually increasing crosslinked trimeric species with increasing glutaraldehyde, whereas CpTRIC mainly maintained a trimeric state, even in the absence of glutaraldehyde and the presence of SDS. MW, molecular weight. (c) Electron density map of SaTRIC at 1.6 Å resolution. The initial phases were determined at 3.1 Å by Se-SAD, and further extended to 1.6 Å into the type 2a crystal (with a space group of P63) by molecular replacement. A section of the experimental map is superimposed onto the SaTRIC model as refined at 1.6 Å resolution, contours are at 2.0σ.

Protein production and biochemical characterization

Using a structural genomics approach36, we tested expression for 53 bacterial and archaeal likely homologues, screened for detergent choice and stability on 8 of them, and obtained suitable crystals for 2 of them. The prokaryotic homologues from the archaeon Sulfolobus acidocaldarius (SaTRIC) and the bacterium Colwellia psychrerythraea (CpTRIC) were found to be trimeric both by size-exclusion coupled with multi-angle light-scattering measurement and by chemical crosslinking experiments (Fig. 1b). In our ultimate structure-based sequence alignment, SaTRIC shares 18% and 23% sequence identity to HsTRIC-A and HsTRIC-B, respectively; while CpTRIC shares 18% to HsTRIC-A and 19% to HsTRIC-B.

Crystallization and structural determination

The archaeal SaTRIC protein was solubilized by various detergents and crystallized readily, but diffracted poorly. Improved diffraction was obtained after the application of lipid cubic phase (LCP). When solubilized in decylmaltoside (DM), SaTRIC was crystallized in LCP in different lattices, including P63, P321 and R32, from various conditions37. All these different lattices contain one SaTRIC molecule per asymmetric unit (ASU), but with distinctive packing and diffraction ability. Phases were determined initially at 3.1 Å resolution (type 1, in P321 lattice) by Se-single-wavelength anomalous diffraction (Se-SAD) from a mutant variant (L148M) of the selenomethionyl (Se-Met) protein. The structure for the wild-type protein in another lattice was solved by molecular replacement and extended to 1.6 Å resolution (type 2a, in P63 lattice; Fig. 1c). The final model for SaTRIC was refined to Rwork/Rfree values of 16.8%/17.9%, containing ordered residues 7–200, two Na+ ions and 90 water molecules. Different from SaTRIC, the bacterial CpTRIC was solubilized in octylmaltoside (OM) and crystallized from detergent micelles in space group R32, with one protomer per ASU. This structure was solved to 2.4 Å resolution by Se-SAD. The final model for CpTRIC was refined to Rwork/Rfree values of 24.0%/27.5%, containing ordered residues 3–198, 5 Cd2+ ions and 27 water molecules. To further identify ion binding or to capture alternative conformation of the channel structures, extensive efforts have been pursued under various conditions. Details for crystallization, data collection, structure refinement and analyses are shown in Table 1 and Supplementary Table 2. In the following, if not specified, we will focus on analyses of the high-resolution SaTRIC structure (type 2a).

Table 1: Data collection and refinement statistics.

Structural analyses on TRIC channels

Both SaTRIC and CpTRIC, as crystallized in various lattices, are highly similar symmetrical trimers (Fig. 2a), consistent with the initial characterization of TRIC-A from rabbit skeletal muscle23 as a trimer. Those subunits are tightly associated, burying 5,500 Å2 (SaTRIC) of total surface area within trimer interfaces. The electrostatic potential surface is largely negative on the extracellular surface (Fig. 2b) and largely positive on the cytoplasmic surface (Fig. 2c). Each protomer of prokaryotic TRIC comprises seven TM helices (termed TM1–TM7; Fig. 2d–f), as predicted35. However, to the best of our knowledge, the folding is novel. The membrane orientation is specified experimentally from green fluorescent protein tagging of Escherichia coli YadS (prokaryotic TRIC homologue in E. coli), which is consistent with the positive-inside rule as applied to the electrostatic potential surfaces of the structure38.

Figure 2: Crystal structure of prokaryotic TRICs.
Figure 2

(a) Ribbon drawing of the SaTRIC trimer, as viewed from outside of the membrane. The colouring is spectral for each protomer, from dark blue at its N terminus to red at its C terminus. (b,c) Electrostatic potential at the solvent accessible contact surfaces55 as viewed from the extracellular side (b), as in a, and from the intracellular side (c), 180° from b. The contour level is at ±7 kT e−1. Red is for negative potential and blue is for positive potential. (d,e) Ribbon drawing of the SaTRIC protomer, coloured as in a. Side chains of conserved residues F20 and F106 are shown as red stick. Top view (d), as viewed from outside of the membrane; front view (e), looking towards the three-fold axis from within the lipid bilayer, 90° rotation from d. Membrane boundaries were calculated by the Orientations of Proteins in Membranes (OPM) server. (f) Membrane topology diagram for prokaryotic TRICs; TM1–3 constitutes N-THB and TM4–6 constitutes C-THB. Spectral colouring is as in e. (g) Superimposition of the trimeric structure of SaTRIC (type 2a) and CpTRIC (Se-Met). SaTRIC protomers are coloured as in a, and CpTRIC protomers are coloured in grey. (h) Superimposition of the protomer structure of SaTRIC (type 2a) and CpTRIC (Se-Met). Stereo view of the superimposed Cα backbones, viewed as in e and coloured as in g.

Overall, the two prokaryotic TRICs are very similar, with a root mean squared deviation (r.m.s.d.) of 1.39 Å when 188 Cα atoms are superimposed. All of the TM helices are fully aligned, except for some connecting loops (Fig. 2g,h). The TRIC sequences contain approximate internal repeats, with sequence identities of 31% and 28% for the repeat pairs in SaTRIC and CpTRIC, respectively (Supplementary Fig. 1a). Interestingly, each homologous repeat forms a structurally similar THB, with r.m.s.d. of 1.32 Å/79 Cα for SaTRIC and r.m.s.d. of 1.45 Å/71 Cα for CpTRIC. More remarkably, the N-THB (TM1–3) and C-THB (TM4–6) assemble into a novel structural fold, with a quasi-two-fold symmetry axis parallel to the membrane plane (Supplementary Fig. 1b). Both N-THB and C-THB include short juxtamembrane helices, H2,3 between TM2 and TM3 on the extracellular side and H5,6 between TM5 and TM6 on the intracellular side. Unique helix TM7 is located on the periphery of the trimer, making contact with TM4 and TM6 from the C-THB; it is poorly conserved except at its cytoplasmic C-terminal end.

Structure of the ion conduction pathway

Many other trimeric channels, including ATP-gated P2X receptors39, acid-sensing ion channels40 and the mechanosensitive Piezo1 channels41, form central ion-conducting pores at the three-fold axes of protomer association; by contrast, the prokaryotic TRIC trimers have three pores as calculated by the HOLE programme42, one through each protomer (Fig. 3a). In the SaTRIC structure at 1.6 Å resolution, an intriguing set of nine electron density features occupies each pore (Fig. 3b). We identified these densities as water molecules on the basis of their coordination with the surrounding residues.

Figure 3: The ion conduction pathway of prokaryotic TRIC.
Figure 3

(a) The pore-lining surface as computed by the programme HOLE is drawn into a ribbon model of the SaTRIC structure (type 2a). We used a simple van der Waals surface for the protein and the programme default probe radius of 1.15 Å. The pore at radius below 1.15 Å is shown in red and that above 2.3 Å is shown in purple, and the intermediate zone is in green. A yellow line through the channel marks the calculated centre line of the pore. (b) Stereo view of the Cα backbone of SaTRIC, oriented as in Fig. 2e. Two conserved residues, F20 (TM1) and F106 (TM4), were shown in red stick. Water molecules observed within the ion conduction pathway are shown as red sphere. Density contours are shown for the water molecules. (c) Ribbon drawing of SaTRIC protomer as in a, but with N-THB (TM1–3) in salmon, C-THB (TM4–6) in green and TM7 in grey. The observed water molecules are shown as b. (d,e) Cross-section through the SaTRIC (type 2a). The models are viewed as c; surface conservation is shown in d and electrostatic potential is shown in e. (f) Ribbon drawing of C-THB in the locked state of SaTRIC type 2a. The inter-helices network of D99–R139–D140–Y155 is indicated. The GGG motif (TM5) is shown in magenta. (g) Ribbon drawing of N-THB, in its unlocked state and oriented as for the C-THB. The corresponding symmetry mates are shown for comparison. The GGG motif (TM2) is shown in magenta. (h) The superimposed N-THB and C-THB, coloured as in f,g. All membrane boundaries were calculated as Fig. 2e.

The TRIC channel pore is bounded by four helices, two from each THB (TM1–2 from N-THB and TM4–5 from C-THB) as associated antiparallel about an axis of quasi-diad symmetry (Fig. 3c). Each pore has an opening to the extracellular side, and it tapers gradually from outside to two narrow constrictions in the middle and finally to a seal at the cytosolic side. Overall, the pore is lined with highly conserved and generally hydrophobic residues, as indicated from the analysis of sequence conservation of prokaryotic TRIC proteins (Fig. 3d). Despite this hydrophobicity, the electrostatic potential on the pore surface is polarized (Fig. 3e), presumably due to sharp invagination adjacent to charged residues outside the membrane. The generally electronegative character of the pore surface may be consistent with its function in conducting cations across the membrane.

The opening of the pore at the extracellular surface involves N-THB residues at one end of that THB; and, by virtue of the quasi-diad symmetry, the blockage of the pore at the cytoplasmic surface involves equivalent residues from the C-THB. The cytoplasmic closure of the pore is due to a hydrogen-bonded network of interactions among C-THB residues D99 (TM4)–R139-D140 (TM5)–Y155 (TM6) (Fig. 3f). We describe this arrangement as a ‘locked’ conformation of C-THB. By contrast, interactions among the quasi-symmetric mates in N-THB, N13 (TM1)–S53-N54 (TM2)–Y70 (TM3), are mostly undone; thereby, N-THB is released to an unlocked, pore-open conformation (Fig. 3g). This asymmetry in the inverted pair of THBs, with C-THB in a locked state versus N-THB in an unlocked state, generates an open-outward conformation. When the two THBs are superimposed (Fig. 3h), it is evident that the network C-THB H-bond interactions of D99 (TM4) with R139 (TM5) and Y155 (TM6) at the cytoplasmic side, together with the side chain of L148 from helix H5,6, serve to close the ion translocation passageway. Moreover, TM4 in C-THB is slightly kinked in its middle, by 16°, whereas TM1 in N-THB is straight; thereby, the pore is relatively open at the unlocked extracellular surface. We will see below that conformational changes within the C-THB can switch it to unlocked state, as would be needed for activation of the channel. Residues of the H-bonded network are highly conserved in prokaryotes but not in eukaryotic TRICs (Fig. 1a).

A signature motif in prokaryotic TRIC sequences is a highly conserved stretch of glycine residues found repeated within TM2 and TM5 (Fig. 1a). The eukaryotic TRICs show similar features, though not as glycine rich (Fig. 1a). For SaTRIC, these stretches are GGG48–50 in TM2 and GGG134–136 in TM5. The high-resolution structure clearly reveals that these glycine motifs generate similar kinks (41° in TM2 and 45° in TM5) near the middle of the respective TM segments (Fig. 4a,b and Supplementary Fig. 1c), disrupting the normal α-helical hydrogen-bonding pattern and exposing backbone amines that coordinate bridging water molecules (Fig. 4c). These intervening water molecules are from the centre of the string of pore waters (Fig. 3b), and these positions correspond to two narrow constrictions in the middle of the putative ion conduction passageway where the pore is covered by the phenyl groups of opposing residues: F20 (TM1) and F106 (TM4) (Fig. 4d,e). It is tempting to speculate that these glycine-mediated kinks may contribute to K+ selectivity. However, extensive attempts to identify potential cation-binding site within the channel pore with crystals grown in various conditions, containing K+, or Rb+, or Cs+, were unsuccessful so far (for details, see Supplementary Table 2).

Figure 4: Characteristics of the ion conduction pathway.
Figure 4

(a) Ribbon diagram of SaTRIC protomer, with the kinked TM2 (in salmon) and TM5 (in green) helices, oriented as in Fig. 2e. (b) The kinked TM2 (in salmon) and TM5 (in green), with red stars marking the GGG motifs. (c) Hydrogen-bonding patterns for the kinked helices and associated water molecules from the ion conduction pathway. The GGG motif of TM2 is in orange and GGG motif of TM5 is in light green. Density contours are shown for the water molecules. (d) Ribbon diagram of SaTRIC protomer, viewed as in a and coloured by sequence conservation as in Fig. 1b. Two conserved residues, F20 (TM1) and F106 (TM4), are shown as stick. (e) A zoom view of the GGG motifs in the kinked TM2 and TM5, coloured as in d. Backbone-coordinated water molecules are shown as in c.

Functional characterization

Although mammalian TRICs are known as K+ channels23,29,30,33, the function of prokaryotic TRIC had not been previously characterized. To test its function, purified SaTRIC protein was fused into planar lipid bilayers with 210 mM KCl in both trans and cis sides (details in Methods). Application of a series of TM potentials to the trans side resulted in apparent unitary currents with a linear single-channel IV relationship (Fig. 5a,b). An asymmetrical solution (210 mM KCl in cis; 810 mM KCl in trans) was applied to confirm that SaTRIC is permeable to K+, showing a reversal potential (near −40 mV) similar to that predicted by the Nernst equation for K+ permeability. The conductance level is 159±2 pS for SaTRIC, comparable to the 199±2 pS for mouse TRIC-B33. To further investigate ion selectivity for SaTRIC, reversal potentials were measured under various bi-ionic conditions. The relative cation permeability sequence for SaTRIC is in the order: K+>Na+>Rb+>Mg2+Ca2+ (Fig. 5c and Supplementary Fig. 2a–d), similar to that of mouse TRIC-B32. Although the prokaryotic TRICs reveal three separated pores within the trimeric channel, they are not gated in a concerted fashion. Instead, there could be alternative conformers for each independent protomer, perhaps modulated by an allosteric effector. Indeed, we found that the SaTRIC channel gating transits between four predominant sub-conductance levels that were 79, 66, 21 and 11% of the full open state (Fig. 5d), roughly similar to mouse TRIC-B33,43. We conclude that the prokaryotic SaTRIC also function as a K+ channel, with similar electrophysiological properties as the eukaryotic TRIC channels.

Figure 5: Ionic conductance measurements of the prokaryotic TRIC.
Figure 5

(a) Representative traces of single SaTRIC currents recorded from planar lipid bilayers at different voltages (210 mM KCl in both trans and cis solutions). (b) Single SaTRIC channel current–voltage relationship. Data are presented as mean±s.e.m. (n=6 for each point). (c) Relative cation permeability for SaTRIC, n=4 for each point. (d) Sub-conductance levels of the SaTRIC, as in asymmetrical solutions, but here with 210 mM KCl in cis chamber and 810 mM in trans chamber. (e) Representative current traces of single SaTRIC channels at +20 mV (210 mM KCl in both trans and cis solutions) from wild-type and mutant proteins. (f) Representative current traces of single SaTRIC channel at the asymmetrical solutions (210 mM KCl in cis and 810 mM KCl in trans chambers) from wild-type and mutant proteins. Interestingly, SaTRIC D99A mutant displays a downward current, whereas wild type and other mutants show an upward current, suggesting SaTRIC D99A is permeable to Cl. (g) The intra-facial gate of the C-THB as locked by a complex H-bond interaction network involving residues tested by mutation. (h) Current amplitude for the wild-type and mutants of single SaTRIC channel at +20 mV holding potentials, n=4 for each group. (i) Open probabilities for the wild-type and mutants of single SaTRIC channel at +20 mV holding potentials (same condition as in e).

On the basis of the structure of SaTRIC, we predicted five residues critical to channel gating (D99, R139, D140, L148 and Y155; Fig. 5g), which form a complex interaction network among helices in C-THB to lock the ion-translocation pore in a closed state. In symmetric bilayer experiments, SaTRIC R139A and L148A behaved similar to the wild type at 20 mV holding potential, whereas SaTRIC N144A and Y155A open more frequently at the same holding potential (Fig. 5e,h,i). Surprisingly, when tested in asymmetric bilayer experiments (Fig. 5f), SaTRIC D99A showed current oppositely directed to that of wild type. Bilayers incorporating SaTRIC D99A proved relatively unstable, but we were able to acquire current–voltage data showing reversal potential (Supplementary Fig. 2e,f). This apparent reversal of cation/anion selectivity is intriguing, and it suggests a key role of the pore passageway in ion permeation across the membrane.

Channel gating

The well-defined series of water molecules through each protomer of the high-resolution type 2a SaTRIC structure (Figs 3 and 4) and sensitivity of conduction properties to mutations of associated residues (Fig. 5) define a putative ion conduction pathway. This path for ion translocation is blocked; however, with C-THB in a locked state, the channel is in an open-outward but closed conformation (Fig. 6a). It is unclear what physiological stimuli could activate the channel and how to stabilize the channel in an open conformation, but a fortunate structure in another lattice (SaTRIC type 3, R32; Supplementary Table 2) may shed light on channel gating. This structure captures the pore open across the entire membrane (Fig. 6b), and the open pathway overlays well with the possible ion conduction path defined by water molecules in the 1.6 Å resolution structure (type 2a). In addition, some clear but unmodelled density was also observed within the same pathway (Supplementary Fig. 3).

Figure 6: Gating of prokaryotic TRIC.
Figure 6

(a) Cross-section through the SaTRIC in closed state (type 2a); N-THB in salmon, C-THB in green and TM7 in grey. The superimposed pore drawing is coloured as in Fig. 3a. (b) Cross-section through the SaTRIC in an open state (type 3); N-THB in violet, C-THB in cyan and TM7 in grey. The superimposed pore drawing is coloured as in Fig. 3a. (c) The superimposition of SaTRIC structures in different states: closed state (type 2a) versus open state (type 3), coloured as in a and b. (d) The superimposition of closed- and open-state structures at the GGG-kinked helices. TM2 above and TM5 below. Colouring is as in a,b. (e) Zoom-up view for the superimposed C-THBs: locked state (type 2a) versus unlocked state (type 3), coloured as in a and b. The surrounding residues of the intra-facial gate are shown.

The pore is more obvious and wider than that observed in the closed channel (type 2a), with a diameter of generally 4 Å across the membrane. The overall structure is similar to that of the closed channel (type 2a), but there are several noticeable structural changes, including an unlocked conformation in C-THB and a newly formed connecting helix between N-THB and C-THB (Fig. 6c–e and Supplementary Fig. 4a,b). When either N-THB or C-THB is compared between the type 2a and type 3 structures, it is obvious to find that both of the GGG-motif helices, TM2 and TM5, are kinked to a larger degree (18° for TM2, from 41° to 59°; and 7° for TM5, from 45° to 52°; Fig. 6d). Furthermore, the C-THB converts from a locked state (type 2a) to an unlocked state (type3; Fig. 6e). Consistent with this observation, larger structural deviation occurs in C-THB versus N-THB, with r.m.s.d. of 1.67 Å for 79 Cα positions for the superimposed C-THB versus r.m.s.d. of 1.24 Å for 78 Cα positions for the superimposed N-THB (Supplementary Fig. 4c,d). Furthermore, with both unlocked, N-THB and C-THB become more similar with the r.m.s.d. after superpositions reduced to 1.17 Å/76 Cα (type 3) from 1.32 Å/79 Cα (type 2a) (Supplementary Fig. 4e,f). Altogether, the comparison of SaTRIC in different conformations reveals a potential switch for opening of TRIC channels.

Ion binding and channel modulation

A highly conserved asparagine residue, near the C-terminal end of GGG-containing TM5, is positioned near the three-fold axis, and Na+ and Mg2+ cations were found to be bound to this site (N144 in SaTRIC) in SaTRIC structures (type2a and b; Supplementary Table 2 and Fig. 7a,b). Two monovalent Na+ ions, each with three bound water molecules, were bound in the 1.6 Å-resolution type 2a structure (Fig. 7c), while in the 1.9 Å-resolution type 2b structure, obtained from a different condition, a single divalent Mg2+ ion was bound at the same site, with slight adjustment on the N144 side chain and also with three bound water molecules (Fig. 7d). Since other trimeric ion channels (for example, acid-sensing ion channel, P2X receptor and Piezo-1) have ion-conducting pores along central three-fold axis, we initially considered this possibility for TRIC channels as well. Thus, we tested the SaTRIC N144R mutant, thinking that it might repel cations; however, it retained a similar conductance and open probability as the wild type, indicating that N144 is not directly involved in ion permeation.

Figure 7: Ion binding and modulation of prokaryotic TRIC.
Figure 7

(a) Ribbon diagram of the SaTRIC trimer, coloured as in Fig. 1a but viewed from the cytosolic side. The conserved N144 residues along the three-fold axis of SaTRIC trimer (type 2a) are shown as stick, and bound Na+ ions (purple) and water molecules (red) are shown as spheres. (b) Corresponding molecular surface for a coloured by sequence conservation as in Fig. 1b. (c) A zoom view of the N144, Na+ ions and water molecules in the structure of SaTRIC (type 2a). Water molecules are shown as red spheres and bound Na+ ions are shown as purple spheres. Asn144 Oδ1 to Na+1, distance=2.4 Å; Na+1 to water molecules, distance=2.4 Å; Asn144 Oδ1 to Na+2, distance=2.5 Å; and Na+2 to water molecules, distance=2.2 Å. Density contours are shown for both water molecules and Na+ ions. (d) A zoom view of the N144, Mg2+ ions and water molecules in the structure of SaTRIC (type 2b). Water molecules as in c, and Mg2+ is shown as green sphere. Asn144 Oδ1 to Mg2+, distance=2.1 Å; and Mg2+ to water molecules, distance=2.3 Å. Density contours are shown for both water molecules and Mg2+ ion. (e) Close-up of bottom view of the N144 in the Na+ bound structure of SaTRIC (type 2a). Bond distances are indicated. (f) Close-up of bottom view of the N144 in the ion-free structure of SaTRIC (type 3). Bond distances are indicated.

Surprisingly, we found that ion binding to N144 is not present in the open-pore SaTRIC structure (type 3). We presume that this change is because of the crystallization conditions (only Li+ and no Na+ or Mg2+; Supplementary Table 2). The local environment around N144 then becomes more compact. This is evident from the distance between main-chain oxygen atoms of N144 about the three-fold axis (144O–144′O), which are slightly smaller in the ion-free state (6.2 Å, in type 3) versus the Na+-bound state (7.1 Å, in type 2a) and also from distances associated with side-chain atoms of N144: ND2–O′ 3.7→2.7 Å; OD1–O′ 3.6→3.0 Å; and OD1–OD1′ 3.1→2.7 Å (Fig. 7e,f). It is not fully clear how these changes at the three-fold axis are coupled to unlocking of C-THB and opening of the SaTRIC channel, but it does seem that this is a site of channel modulation. In keeping with such allosteric regulation, single-channel recordings from the N144A mutant show a greatly increased open probability and larger conductance (Fig. 5h,i).

Another ion-binding site was also observed at an inter-protomer interface in the trimeric channel of CpTRIC (Supplementary Fig. 5). One Cd2+ ion was bound to a well-conserved Asp residues (D40 in CpTRIC, located at the N-terminal end of the GGG-kinked TM2), and interacting with several backbone carbonyl oxygen or nitrogen from the short linker between TM5′ and TM6′ on the adjacent protomer (residues 145–149 in CpTRIC). Overall, ion bindings associate with conformational changes within the TM segments of the trimeric channel, as evidenced from the comparisons of structures from various conditions (Supplementary Fig. 6). The mechanism for coupling ion binding to channel activity needs further investigation.

Distinctiveness of the TRIC channel structure

The TRIC cation channels are structurally distinct and also appear to be gated in distinctively. The most remarkable feature for TRIC family architecture is that two inverted repeat motifs within each protomer help to form the ion conduction pore across the membrane. Interestingly, a similar six-helix topology (ignoring TM7) and inverted repeat characteristics are also found in other homo-oligomeric channels, namely aquaporin (tetrameric) and formate channels (pentameric) (Supplementary Fig. 7a). The common feature for these inverted repeat motifs is three TMs, which are essentially straight for the first and third, whereas the kinked second TM of TRIC channels has the counterparts in aquaporin and formate channels that are broken into two halves, connected by an Ω loop (Supplementary Fig. 7b). As a consequence, although the topologies are similar, the structural overlaps of SaTRIC with AQP1 and FocA are highly divergent. If there is any evolutionary relationship among these inverted repeat structures of differing topologies, it is lost in the sequence record.

Comparison to other TRIC channel structures

Recently, structures were reported for two invertebrate TRIC channels44 and for two other prokaryotic TRIC channels45. Below, we compare those results to the structures that we report here.

Caenorhabditis elegans TRIC proteins, called TRIC-B1 and TRIC-B2 (Protein Databank (PDB) accession codes 5EGI and 5EIK), were analysed at resolutions of 3.3 and 2.3 Å, respectively44, and are very similar to one another (r.m.s.d. of 1.1 Å for 212 superimposed Cα atoms). Both the protein foldings and trimeric organizations are also essentially the same as in our prokaryotic TRIC proteins. There are appreciable differences in details, however. Whereas SaTRIC (type 2) and CpTRIC are also very similar to one another (1.39 Å r.m.s.d. for 188 superimposed Cα atoms), the prokaryotic and invertebrate homologues differ considerably. For example, comparing CeTRIC-B2 with SaTRIC we find r.m.s.d. values of 3.33 (163 superimposed Cα) and 2.48 Å (170 superimposed Cα), respectively, for the type 2 and type 3 conformational states. Type 2 and type 3 SaTRIC compare at 1.92 Å r.m.s.d. (188 superimposed Cα). Although CeTRIC-B2 is more similar to the open state of SaTRIC, its pore is blocked.

The prokaryotic and invertebrate TRIC channels show conductance properties that are generally similar to one another, including sub-conductance states like those that are well characterized for vertebrate TRIC-B channels33. Other features differentiate the prokaryotic and invertebrate TRIC channels. In contrast to the endogenous PIP2 molecules that are associated with the CeTRIC proteins, we found no clear density for lipid molecules bound to the prokaryotic TRICs, although we did discover lipid-shaped fenestrations in SaTRIC similar to those of RsTRIC45. Also, the prokaryotic TRICs persist as trimers despite lacking tightly bound lipids, whereas the lack of PIP2 destabilized the trimeric assembly of CeTRIC-B1; and we found no electrophysiological evidence for ‘monomers’. Ion-binding characteristics are also distinctive for these two classes of TRICs; in particular, there seems to be no cation site on the three-fold axis of CeTRICs as in SaTRIC, and Ca2+-binding sites were not found for our prokaryotic TRICs. Finally, the hydrogen-bonded network of the locked C-THB end of the closed conformation of SaTRIC structure is missing in the CeTRICs. Almost nothing is known about the physiological roles of TRIC channels in either prokaryotes or invertebrates; however, it appears that although conductance properties are similar, their modes of regulation are likely different.

The additional prokaryotic TRIC structures are of bacterial RsTRIC from Rhodobacter sphaeroides (3.4 Å resolution, PDB accession code 5H36) and archaeal SsTRIC from Sulfolobus solfataricus (2.6 Å resolution, PDB accession code 5H35)45. These structures are very similar to one another and also to those of the prokaryotic TRICs reported here, with r.m.s.d. values of 1.24 Å for SaTRIC (type 2a) versus SsTRIC (184 superimposed Cα) and 2.13 Å for SaTRIC (type 3) versus SsTRIC (183 superimposed Cα). In keeping with the closer similarity of SsTRIC to the closed conformation of SaTRIC, an H-bonded network of interactions closes the C-THB in a locked conformation in both SsTRIC and RsTRIC, just as in the structures of both SaTRIC type 2b and CpTRIC. In addition, ion binding at the three-fold axis of the channel is also observed in SsTRIC structure (N142), obtained in the presence of 100 mM MgCl2 and 100 mM NaCl. The binding position, geometry and distances to side-chain atoms of SsTRIC N142 are similar to those of the 1.9 Å-resolution structure of the Mg2+-bound SaTRIC (type 2b). These observations indicate conserved mechanisms for gating and modulation of prokaryotic TRICs.


Selection of target sequences

E. coli YadS (now identified as EcTRIC) was selected as a target for structural analysis by the NYCOMPS project in structural genomics of membrane proteins. This EcTRIC sequence was used as a seed for expansion into other candidate family members by using standard NYCOMPS procedures36. PSI-BLAST46 searches were made of the NYCOMPS98 data set of prokaryotic genomes, which contained 40,000 sequences for alpha-helical membrane proteins. Those sequences that matched EcTRIC at E<10−3 in alignments with coverage of at least 50% of the predicted TM regions for both proteins were selected for further testing against our post-seed-expansion criteria36. Sequences meeting the criteria were submitted to the NYCOMPS protein production pipeline.

Protein expression screening

A total of 54 full-length TRIC homologues were identified and amplified by PCR from the following 42 prokaryotic species: E. coli K12; Mesorhizobium loti; Bradyrhizobium japonicum USDA110; Xanthomonas campestris ATCC 33913; Vibrio fischeri ES114; Chromobacterium violaceum DSM 30191; Thermus thermophilus HB27; Silicibacter pomeroyi DSS-3; Salinibacter ruber DSM 13855; S. solfataricus; Streptomyces coelicolor A3; Rhodospirillum rubrum; Ralstonia solanacearum GMI1000; Pseudomonas fluorescens Pf-5; Pseudomonas syringae DC3000; Pseudomonas putida KT2440; Porphyromonas gingivalis W83; Pseudomonas aeruginosa PAO1; Desulfovibrio vulgaris Hildenborough; Deinococcus radiodurans R1; Corynebacterium glutamicum; C. psychrerythraea 34H; Agrobacterium tumefaciens C58; Bacteroides fragilis NCTC 9343; Acinetobacter sp. ADP1; Halobacterium sp. NRC-1; Haloarcula marismortui DSM 3752; Vibrio cholerae N16961; Bordetella bronchiseptica RB50; S. acidocaldarius; Lactococcus lactis; Streptococcus pyogenes M1 GAS; Streptococcus agalactiae 2603V/R; Salmonella typhimurium LT2; Erwinia carotovora atroseptica SCRI1043; Bacillus cereus DSM 31; Vibrio parahaemolyticus RIMD 2210633; Methanococcus maripaludis S2; Shigella flexneri 2a 2457T; Shewanella oneidensis MR-1; Bacillus subtilis 168; and Haemophilus influenzae Rd KW20.

Selected cDNAs were cloned into a pET vector (Novagen, Inc.) that had been modified to fuse FLAG and deca-histidine sequences at the C terminus after a TEV protease cleavage site. Proteins were expressed in E. coli BL21(DE3) pLysS using a high-throughput format (0.6 ml volumes), and purified by metal-affinity capture after sonication in a buffer that contained n-dodecyl-β-D-maltopyranoside (Anatrace, Inc.). Analytical size-exclusion chromatography was then performed in 12 different detergent-containing mobile phases, among which were those with detergents n-dodecyl-β-D-maltopyranoside (DDM), n-decyl-β-D-maltopyranoside (DM), n-octyl-β-D-maltopyranoside (OM), n-octyl-β-D-glucopyranoside (OG) and lauryl dimethyl amine oxide. Multi-angle light scattering with refractive index detection was used to analyse the oligomeric state. The SaTRIC (from S. acidocaldarius) and CpTRIC (from C. psychrerythraea) were found to be monodisperse and stable, and these were sent on to be scaled up for structure determination.

Scaled-up production and purification

Scaled-up production of purified proteins adopted our previous procedures47. Transformed BL21 pLysS cells were grown to optical density (OD) 0.6–0.8 at 37 °C in 2 × YT media after being inoculated with 1% of an overnight culture. After induction with 0.4 mM isopropyl-β-D-thiogalactoside, the culture was allowed to grow for another 4 h at 37 °C. Cells were then collected by centrifugation and stored at −80 °C for future use. Se-Met SaTRIC mutant (L148M) and Se-Met CpTRIC were expressed in a similar manner, but with Se-Met replacing methionine in defined minimal media. Cells were thawed, resuspended in a solubilization buffer (50 mM Tris-HCl, pH 8.0, and 200 mM NaCl), and then lysed with two passes in a French Press at 15–20,000 psi. Centrifugation at 10,000g for 20 min pelleted cell debris, and ultracentrifugation of the resulting supernatant at 150,000g for 1 h isolated the membrane fraction.

The membrane fraction was homogenized in the solubilization buffer and incubated at 4 °C for 1 h in DDM at a final concentration of 1% DDM (w/v). Ultracentrifugation at 150,000g for 30 min was used to remove non-dissolved matter. The supernatant was then loaded onto a 5 ml HiTrap Ni2+-NTA affinity column (GE Healthcare), which had been pre-equilibrated with the solubilization buffer supplemented with 0.05% DDM. After a wash with 20 column volumes of solubilization buffer, His-tagged protein was eluted with 350 mM imidazole in the buffer. Affinity tags were removed by incubation at 4 °C overnight in super TEV at 1:1,000 mass ratio, and tag removal was confirmed by SDS–PAGE. Samples were concentrated to 10 mg ml−1, and preparative size-exclusion chromatography on a Superdex-200 column was performed to purify detergent-solubilized protein from aggregates, TEV protease and cleaved tags, and for buffer and detergent exchange. The gel-filtration buffer contained 20 mM HEPES (pH 7.5), 200 mM NaCl (or RbCl or NaBr; Supplementary Table 2) and 2 × CMC (critical micelle concentration) of detergent. The SaTRIC and CpTRIC proteins were well behaved and stable in nearly all tested detergents, and we have purified them from DDM, DM, OM, OG and lauryl dimethyl amine oxide.

Biochemical characterization

For crosslinking experiments, purified SaTRIC and CpTRIC protein in DDM (around 1 mg ml−1 in 30 μl) was incubated with various concentrations of glutaraldehyde (0, 0.00005%, 0.0001%, 0.0005% and 0.001%) at room temperature for 8 h. The reaction was quenched by addition of 50 mM Tris-Cl, pH 8.0. The incubated samples were separated on 12% SDS–PAGE gels, showed a ladder consistent with a trimeric structure.

Crystallization and data collection

Purified SaTRIC and CpTRIC protein in a series of detergents, including DDM, DM, OM and OG, were concentrated to 10 mg ml−1 for initial crystal trials in a Mosquito robot with commercial screens from Hampton research, Emerald Biosystems and Molecular Dimension. SaTRIC protein readily crystallized in detergent micelles, but diffracted poorly. Improved diffraction was obtained after the application of the LCP crystallization. The SaTRIC, purified in detergent DM, was reconstituted into the LCP by mixing with monoolein at a 2:3 protein to lipid ratio (w/w), using the twin-syringe mixing method. After the reconstitution, 50 nl LCP drops were dispensed onto laminex glass plates and manually overlaid with 1.0 μl of precipitant solution. After extensive optimization we reached conditions supporting very high resolution. Wild-type SaTRIC crystallized from 100 mM Li2SO4, 50 mM Na-Citrate (pH 5.5) and 40% PEG200. To facilitate phase determination by Se-SAD, we introduced one methionine mutation (L148M) in the wild-type SaTRIC. The Se-Met SaTRIC (L148M) was also crystallized in LCP, but in a different condition that contain the following: 40% PEG200; 0.1 NaCl; 0.1 M MgCl2; and 0.1 M MES (pH 6.0). Cryo-protection was achieved by adding 5% PEG200 to the crystallization solution. The Se-Met CpTRIC, when solubilized in β-octylmaltoside (OM), was crystallized in detergent micelles in the solution containing 38% PEG400, 0.1 M NaCl, 0.1 M CdCl2 and 0.1 M Tris-HCl (pH 8.5). For other crystals of SaTRIC and CpTRIC, see Supplementary Table 2 for details.

Structure determination and refinement

Native and Se-Met SAD data were collected at multiple beamlines, including BL17U and BL19U at Shanghai Synchrotron Radiation Facility and at 24IDC at Advanced Photon Source and processed with the software XDS48. Crystals of the Se-Met SaTRIC (L148M) mutant were grown in space group of P321, with cell dimensions a=b=111.1 Å, c=47.7 Å and α=β=90°, γ=120°. The initial phase was determined at 3.1 Å resolution from Se-Met SAD with data collected at 0.97853 Å. Assessment of data quality for phasing, location of heavy atom sites and phases were calculated using the HKL2MAP interface to SHELX programmes. All the secondary structure elements were clearly visible in the experimental electron density map. The initial model was built manually using COOT49. Native crystals for the wild-type SaTRIC protein belong to space group of P63 with cell dimensions a=b=64.3 Å, c=80.8 Å and α=β=90°, γ=120°. Phases for the native wild-type SaTRIC structure (type 2a) were determined by molecular replacement using the model obtained by Se-Met SAD data and extended to 1.60 Å resolution. The native model was rebuilt in COOT according to 2FOFC and 1FOFC map and refined at 1.60 Å resolution against the wild-type SaTRIC native data with phenix.refine50. Structure validation was performed with PROCHECK51. Data collection and refinement statistics are summarized in Table 1, and figures were prepared in PyMOL (

Other structures, including Mg2+-bound SaTRIC (type 2b), the ion-free SaTRIC (type 3) and other ion complexes were solved by molecular replacement by using crystals obtained from LCP under different conditions; see Supplementary Table 2 for details. Identifications of the different ions in these structures were based on the coordination geometries and on refinements of B-factors and occupancies for alternative elements corresponding to ions that were present in the crystallization media. In the SaTRIC structure from the type 2a crystal, the two Na+ ions along the three-fold axis of the trimeric channel were at the distance of 2.4–2.5 Å to the neighbouring atoms of surrounded residues or waters, and the refined B-factors were 22.8 for Na+1 and 27.2 for Na+2, which were similar to that of the neighbouring atoms; however, if we replaced the Na+ ion with another possible ion species in the solution, Li+, the refined B-factor became 6.1 and 6.4 respectively, which was far smaller than that of the neighbouring atoms. In another SaTRIC structure from the type 2b crystal, the assigned Mg2+ ion along the three-fold axis of the trimeric channel was at the distance of 2.1–2.3 Å to the neighbouring atoms of surrounded residues or waters, with a refined B-factor of 19.3, which was similar to that of the neighbouring atoms. If we replaced the Mg2+ ion with another possible ion species in the solution, Rb+ ion, the refined B-factor became 68.6, which was far larger than that of the neighbouring atoms.

CpTRIC crystals have a space group of R32, with cell dimensions a=b=91.3 Å and c=252.8 Å, one protein molecule per ASU. The structure was solved at 2.4 Å by Se-Met SAD. The resulting electron density map permitted automatic tracing of a nearly complete model.

Site-directed mutagenesis

A QuikChange site-directed mutagenesis kit (Stratagene, La Jolla, CA) was used to construct mutants, which were confirmed by sequencing. Mutants were expressed and purified as for the wild-type protein.


Lipid bilayer experiments were conducted as in our study of a bacterial bestrophin52. SaTRIC proteins, including wild type and mutants, were purified in the same way as those used for crystallization. Purified SaTRIC proteins (wild type and mutants), at final concentration between 1 and 5 μg ml−1, were fused into planar lipid bilayers formed by painting a lipid mixture of phosphatidylethanolamine and phosphatidylcholine (Avanti Polar Lipids) in a 3:1 ratio in decane across a 200 μm hole in a polystyrene partition separating the internal and external solutions in polysulfonate cups (Warner Instruments). The trans chamber (1.0 ml), representing the extracellular compartment, was connected to the head stage input of a bilayer voltage clamp amplifier. The cis chamber (1.0 ml), representing the cytoplasmic compartment, was held at virtual ground. Solutions used for IV or cation/anion channel detection were as follows (in mM): 210 KCl and 10 HEPES (pH 7.4) in the cis solution; and 210/810 KCl and 10 HEPES (pH 7.4) in the cis/trans solution. For ion selectivity experiments, the trans-side KCl was changed to either 210 mM XCl (X=Na+, or Rb+, Cs+) or 105 mM YCl2 (Y=Ca2+ or Mg2+). Purified proteins were added to the cis side and fused with the lipid bilayer. Currents were recorded every 2 min after application of the voltage to the trans side. Single-channel currents were recorded using a Bilayer Clamp BC-525D (Warner Instruments, LLC, CT), filtered at 1 kHz using a Low-Pass Bessel Filter 8 Pole (Warner Instruments, LLC, CT) and digitized at 4 kHz. All experiments were performed at room temperature (23±2 °C). pH for the solution was adjusted with Choline. The membrane potential that gives zero current during ramp pulse was taken as the reversal potential

Electrophysiological data and statistical analyses

The relative monovalent cation permeability (PX/PK) was calculated according to the Goldman–Hodgkin–Katz equation:

The relative divalent cations (Ca2+ and Mg2+) versus K+ permeability ratio (PX2+/PK+) of SaTRIC was calculated using the Fatt–Ginsborg equation53:

where R, T and F have their usual meanings and Erev is the zero current reversal potential. The value of RT/F used was 25.7 mV at 23 °C.

Single-channel Po was determined over 2 min of continuous recording using the method of 50% threshold analysis. The recordings were analysed by using Clampfit 10.1 (Molecular Devices) and Prism (ver.5.0, GraphPad).

Data availability

The X-ray crystallographic coordinates and structure factor files of the prokaryotic TRIC structures have been deposited in the PDB with the accession codes 5WUC, 5WUD, 5WUE and 5WUF. The following PDB accession codes were used in this work: 5EGI (CeTRIC-B1); 5EIK (CeTRIC-B2); 5H36 (RsTRIC); and 5H35 (SsTRIC). All other data supporting the finding of this study are either provided in the Article and Supplementary Files or available from the authors on reasonable request.

Additional information

How to cite this article: Su, M. et al. Structural basis for conductance through TRIC cation channels. Nat. Commun. 8, 15103 doi: 10.1038/ncomms15103 (2017).

Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.


  1. 1.

    et al. Calcium signalling—an overview. Semin. Cell Dev. Biol. 12, 3–10 (2001).

  2. 2.

    , & Calcium signalling: dynamics, homeostasis and remodelling. Nat. Rev. Mol. Cell Biol. 4, 517–529 (2003).

  3. 3.

    , & The dual role of calcium as messenger and stressor in cell damage, death, and survival. Int. J. Cell Biol. 2010, 546163 (2010).

  4. 4.

    , , & Calcium in health and disease. Met. Ions Life Sci. 13, 81–137 (2013).

  5. 5.

    et al. Ca2+ overload and sarcoplasmic reticulum instability in tric-a null skeletal muscle. J. Biol. Chem. 285, 37370–37376 (2010).

  6. 6.

    et al. Structural and functional conservation of key domains in InsP3 and ryanodine receptors. Nature 483, 108–112 (2012).

  7. 7.

    Ryanodine receptors: structure and function. J. Biol. Chem. 287, 31624–31632 (2012).

  8. 8.

    et al. Structure of a mammalian ryanodine receptor. Nature 517, 44–49 (2015).

  9. 9.

    et al. Structure of the rabbit ryanodine receptor RyR1 at near-atomic resolution. Nature 517, 50–55 (2015).

  10. 10.

    et al. Structural basis for gating and activation of RyR1. Cell 167, 145–157 e17 (2016).

  11. 11.

    et al. Structural insights into Ca(2+)-activated long-range allosteric channel gating of RyR1. Cell Res. 26, 977–994 (2016).

  12. 12.

    , , , & The central domain of RyR1 is the transducer for long-range allosteric gating of channel opening. Cell Res. 26, 995–1006 (2016).

  13. 13.

    et al. Structural basis for the gating mechanism of the type 2 ryanodine receptor RyR2. Science 354, aah5324 (2016).

  14. 14.

    Mechanisms of Ca2+ release from sarcoplasmic reticulum of skeletal muscle. Physiol. Rev. 64, 1240–1320 (1984).

  15. 15.

    Calcium release from the sarcoplasmic reticulum. Physiol. Rev. 57, 71–108 (1977).

  16. 16.

    , , , & Ion channels in smooth muscle: regulation by the sarcoplasmic reticulum and mitochondria. Cell Calcium 42, 447–466 (2007).

  17. 17.

    & Calcium uptake and release modulated by counter-ion conductances in the sarcoplasmic reticulum of skeletal muscle. Acta Physiol. Scand. 156, 387–396 (1996).

  18. 18.

    Personal recollections on the discovery of the ryanodine receptors of muscle. Biochem. Biophys. Res. Commun. 369, 195–207 (2008).

  19. 19.

    et al. Calcium-induced calcium release from the sarcoplasmic reticulum can be evaluated with a half-logistic function model in aequorin-injected cardiac muscles. J. Anesth. 25, 831–838 (2011).

  20. 20.

    & Detection of K+ and Cl-channels from calf cardiac sarcolemma in planar lipid bilayer membranes. Nature 298, 849–852 (1982).

  21. 21.

    & Permeability of canine cardiac sarcoplasmic reticulum vesicles to K+, Na+, H+, and Cl. J. Biol. Chem. 257, 7704–7711 (1982).

  22. 22.

    Monovalent ion and calcium ion fluxes in sarcoplasmic reticulum. Mol. Cell Biochem. 55, 65–82 (1983).

  23. 23.

    et al. TRIC channels are essential for Ca2+ handling in intracellular stores. Nature 448, 78–82 (2007).

  24. 24.

    & Intracellular calcium release channels mediate their own countercurrent: the ryanodine receptor case study. Biophys. J. 95, 3706–3714 (2008).

  25. 25.

    et al. Sarcoplasmic reticulum K(+) (TRIC) channel does not carry essential countercurrent during Ca(2+) release. Biophys. J. 105, 1151–1160 (2013).

  26. 26.

    Voltage-gated cation conductance channel from fragmented sarcoplasmic reticulum: steady-state electrical properties. J. Membr. Biol. 40, 1–23 (1978).

  27. 27.

    , & Ionic selectivity, saturation, and block in a K+-selective channel from sarcoplasmic reticulum. J. Gen. Physiol. 76, 425–446 (1980).

  28. 28.

    & Decamethonium and hexamethonium block K+ channels of sarcoplasmic reticulum. Nature 288, 495–497 (1980).

  29. 29.

    , & New and notable ion-channels in the sarcoplasmic/endoplasmic reticulum: do they support the process of intracellular Ca(2+) release? J. Physiol. 593, 3241–3251 (2015).

  30. 30.

    et al. Trimeric intracellular cation channels and sarcoplasmic/endoplasmic reticulum calcium homeostasis. Circ. Res. 114, 706–716 (2014).

  31. 31.

    et al. Essential role of the TRIC-B channel in Ca2+ handling of alveolar epithelial cells and in perinatal lung maturation. Development 136, 2355–2361 (2009).

  32. 32.

    et al. Charade of the SR K+-channel: two ion-channels, TRIC-A and TRIC-B, masquerade as a single K+-channel. Biophys. J. 99, 417–426 (2010).

  33. 33.

    et al. TRIC-B channels display labile gating: evidence from the TRIC-A knockout mouse model. Pflugers Arch. 465, 1135–1148 (2013).

  34. 34.

    , & New molecular components supporting ryanodine receptor-mediated Ca(2+) release: roles of junctophilin and TRIC channel in embryonic cardiomyocytes. Pharmacol. Ther. 121, 265–272 (2009).

  35. 35.

    & Bioinformatic characterization of the trimeric intracellular cation-specific channel protein family. J. Membr. Biol. 241, 77–101 (2011).

  36. 36.

    et al. Structural genomics target selection for the New York consortium on membrane protein structure. J. Struct. Funct. Genomics 10, 255–268 (2009).

  37. 37.

    Lipidic cubic phase technologies for membrane protein structural studies. Curr. Opin. Struct. Biol. 21, 559–566 (2011).

  38. 38.

    et al. Global topology analysis of the Escherichia coli inner membrane proteome. Science 308, 1321–1323 (2005).

  39. 39.

    , , & Crystal structure of the ATP-gated P2X(4) ion channel in the closed state. Nature 460, 592–598 (2009).

  40. 40.

    , & Pore architecture and ion sites in acid-sensing ion channels and P2X receptors. Nature 460, 599–604 (2009).

  41. 41.

    et al. Architecture of the mammalian mechanosensitive Piezo1 channel. Nature 527, 64–69 (2015).

  42. 42.

    , , , & HOLE: a program for the analysis of the pore dimensions of ion channel structural models. J. Mol. Graph. 14, 354–360 (1996).

  43. 43.

    et al. Subconductance gating and voltage sensitivity of sarcoplasmic reticulum K(+) channels: a modeling approach. Biophys. J. 109, 265–276 (2015).

  44. 44.

    et al. Pore architecture of TRIC channels and insights into their gating mechanism. Nature 538, 537–541 (2016).

  45. 45.

    et al. Crystal structures of the TRIC trimeric intracellular cation channel orthologues. Cell Res. 26, 1288–1301 (2016).

  46. 46.

    et al. Gapped BLAST and PSI-BLAST: a new generation of protein database search programs. Nucleic Acids Res. 25, 3389–3402 (1997).

  47. 47.

    et al. Homologue structure of the SLAC1 anion channel for closing stomata in leaves. Nature 467, 1074–1080 (2010).

  48. 48.

    XDS. Acta Crystallogr. D 66, 125–132 (2010).

  49. 49.

    & Coot: model-building tools for molecular graphics. Acta Crystallogr. D 60, 2126–2132 (2004).

  50. 50.

    et al. PHENIX: a comprehensive Python-based system for macromolecular structure solution. Acta Crystallogr. D 66, 213–221 (2010).

  51. 51.

    , , & Procheck: a program to check the stereochemical quality of protein structures. J. Appl. Cryst. 26, 283–291 (1993).

  52. 52.

    et al. Structure and selectivity in bestrophin ion channels. Science 346, 355–359 (2014).

  53. 53.

    & The ionic requirements for the production of action potentials in crustacean muscle fibres. J. Physiol. 142, 516–543 (1958).

  54. 54.

    et al. ConSurf 2005: the projection of evolutionary conservation scores of residues on protein structures. Nucleic Acids Res. 33, W299–W302 (2005).

  55. 55.

    et al. Rapid grid-based construction of the molecular surface and the use of induced surface charge to calculate reaction field energies: applications to the molecular systems and geometric objects. J. Comput. Chem. 23, 128–137 (2002).

Download references


We thank Bailong Xiao and Jian Yang for helpful discussions; James Love and staff of the New York Consortium on Membrane Protein Structure (NYCOMPS) for assistance in early stages of the project; laboratory colleagues for advice in protein chemistry and crystallography; and Wenming Qin, Deqiang Yao, Lijie Wu, Oliver Clarke, Shuaiyi Liang and Wei Wang for help with synchrotron experiments at beamlines, BL19U and BL17U at Shanghai Synchrotron Radiation Facility, or NE-CAT beam-line 24-ID-C at the Advanced Photon Source. This project is financially supported by the Strategic Priority Research Program of the Chinese Academy of Sciences (XDB08020301), the National 973 Project Grant of the Ministry of Science and Technology (2015CB910102 and 2016YFA0500503) and the National Natural Science Foundation of China (31322005) to Y.C. Y.C. is supported in part by the ‘National Thousand Young Talents’ programme from the Office of Global Experts Recruitment in China. W.A.H. is supported in part by NIH grant GM 107462. This work also benefited from NIH support to the New York Consortium on Membrane Protein Structure (NYCOMPS; U54 GM095315) and by the Center on Membrane Protein Production and analysis (COMPPÅ; P41 GM116799).

Author information

Author notes

    • Min Su
    • , Feng Gao
    • , Qi Yuan
    • , Yang Mao
    •  & De-lin Li

    These authors contributed equally to this work.


  1. State Key Laboratory of Molecular Developmental Biology, Institute of Genetics and Developmental Biology, Chinese Academy of Sciences, Beijing 100101, China

    • Min Su
    • , Feng Gao
    • , Yang Mao
    • , Hong Zhao
    •  & Yu-hang Chen
  2. CAS Center for Excellence in Biomacromolecules, Beijing 100101, China

    • Min Su
    • , Feng Gao
    • , Yang Mao
    • , Hong Zhao
    •  & Yu-hang Chen
  3. Department of Physiology and Cellular Biophysics, Columbia University, New York, New York 10032, USA

    • Qi Yuan
    • , Andrew R Marks
    •  & Wayne A Hendrickson
  4. State Key Laboratory of Medicinal Chemical Biology, College of Pharmacy and Tianjin Key Laboratory of Molecular Drug Research, Nankai University, Haihe Education Park, 38 Tongyan Road, Tianjin 300353, China

    • Yang Mao
    •  & Cheng Yang
  5. University of Chinese Academy of Sciences, Beijing 100049, China

    • De-lin Li
    • , Xiao-hui Wang
    • , Yang Zeng
    • , Fa-ben Zhang
    •  & Yu-hang Chen
  6. Department of Biochemistry and Molecular Biophysics, Columbia University, New York, New York 10032, USA

    • Youzhong Guo
    •  & Wayne A Hendrickson
  7. Center on Membrane Protein Production and Analysis, New York Structural Biology Center, 89 Convent Avenue, New York, New York 10027, USA

    • Renato Bruni
    • , Brian Kloss
    •  & Wayne A Hendrickson


  1. Search for Min Su in:

  2. Search for Feng Gao in:

  3. Search for Qi Yuan in:

  4. Search for Yang Mao in:

  5. Search for De-lin Li in:

  6. Search for Youzhong Guo in:

  7. Search for Cheng Yang in:

  8. Search for Xiao-hui Wang in:

  9. Search for Renato Bruni in:

  10. Search for Brian Kloss in:

  11. Search for Hong Zhao in:

  12. Search for Yang Zeng in:

  13. Search for Fa-ben Zhang in:

  14. Search for Andrew R Marks in:

  15. Search for Wayne A Hendrickson in:

  16. Search for Yu-hang Chen in:


M.S. performed bioinformatics analyses, purified the SaTRIC proteins, performed LCP crystallization, collected data at Advanced Photon Source beamlines, conducted bilayer measurements and analysed the structure; Y.M. purified SaTRIC and CpTRIC proteins, performed crystallizations in detergent micelles and collected data at Shanghai Beamlines; Q.Y. conducted bilayer measurements and analysed the data; F.G. collected diffraction data, solved and analysed the structure; D.-l.L. purified SaTRIC wild-type and mutant proteins and collected data at Shanghai Beamlines; Y.G., X.-h.W., R.B., B.K., C.Y., H.Z., Y.Z. and F.-b.Z. performed experiments; A.R.M. oversaw analyses of bilayer measurements; W.A.H. analysed structure and wrote the manuscript; Y.-h.C. initiated the project, planned and analysed experiments, supervised the research and wrote the manuscript. All authors contributed to discussion of the data and editing of the manuscript.

Competing interests

The authors declare no competing financial interests.

Corresponding authors

Correspondence to Min Su or Feng Gao or Qi Yuan or Yang Mao or De-lin Li or Wayne A Hendrickson or Yu-hang Chen.

Supplementary information

PDF files

  1. 1.

    Supplementary Information

    Supplementary Figures, Supplementary Tables.

  2. 2.

    Peer Review File


By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.

Creative CommonsThis work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit