Skip to main content

Thank you for visiting You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

Global distribution of particle phase state in atmospheric secondary organic aerosols


Secondary organic aerosols (SOA) are a large source of uncertainty in our current understanding of climate change and air pollution. The phase state of SOA is important for quantifying their effects on climate and air quality, but its global distribution is poorly characterized. We developed a method to estimate glass transition temperatures based on the molar mass and molecular O:C ratio of SOA components, and we used the global chemistry climate model EMAC with the organic aerosol module ORACLE to predict the phase state of atmospheric SOA. For the planetary boundary layer, global simulations indicate that SOA are mostly liquid in tropical and polar air with high relative humidity, semi-solid in the mid-latitudes and solid over dry lands. We find that in the middle and upper troposphere SOA should be mostly in a glassy solid phase state. Thus, slow diffusion of water, oxidants and organic molecules could kinetically limit gas–particle interactions of SOA in the free and upper troposphere, promote ice nucleation and facilitate long-range transport of reactive and toxic organic pollutants embedded in SOA.


Secondary organic aerosols (SOA) account for a large fraction of submicron particles in the atmosphere, impacting clouds, climate, air quality and public health1,2. SOA particles influence climate by scattering sunlight and serving as nuclei for cloud droplets and ice crystals. SOA represent a large source of uncertainty in current understanding of global climate change and air pollution2,3. Traditionally, SOA particles have been assumed to be homogeneous and well-mixed liquids. Recent laboratory experiments as well as atmospheric measurements, however, have demonstrated that they can occur in amorphous solid or semi-solid phase states depending on chemical composition, relative humidity (RH) and temperature4,5,6. The particle phase state is crucial for various atmospheric gas–particle interactions7, including SOA formation and partitioning8,9,10, heterogeneous and multiphase reactions11,12 and ice nucleation13,14,15,16. The glass transition temperature (Tg) characterizes the non-equilibrium phase change from a glassy solid state to a more pliable semi-solid state as the temperature increases5. It is important to know the SOA phase state in multicomponent atmospheric particles for better quantification of aerosol effects on climate and air quality; but little information is available on the spatial distribution of the particle phase state of SOA on regional and global scales.

Here we developed a method to estimate Tg of SOA components and provided a first estimate of the global distribution of the SOA phase state by applying the global chemistry climate model. In the planetary boundary layer, we found that SOA are liquid in tropical and polar air with high RH, semi-solid in the mid-latitudes and solid over dry lands. In the middle and upper troposphere, SOA should be mostly in a glassy state, which may promote ice nucleation and facilitate long-range transport of organic pollutants embedded in SOA.


Molecular corridor and glass transition temperature

Our analysis of SOA phase state builds on the molecular corridor approach17,18, which is a two-dimensional framework of volatility and molar mass of SOA components constrained by boundary lines of low and high molecular O:C ratio. Figure 1a shows the interdependence of volatility, molar mass and Tg for 654 SOA components composed of C, H and O formed upon oxidation of biogenic precursors (isoprene, α-pinene, limonene, glyoxal) as well as anthropogenic precursors (C12 alkanes)17. The upper and lower bounds of the corridor into which the data fall are given by two lines representing n-alkanes (CnH2n+2) with O:C=0 and sugar alcohols (CnH2n+2On) with O:C=1.

Figure 1: Characteristic relations between molecular properties and glass transition temperature of organic compounds.
figure 1

(a) Molecular corridor of molar mass plotted against volatility of 654 SOA compounds17 colour-coded by glass transition temperature (Tg) estimated with the Boyer–Kauzmann rule5. The upper dashed line indicates the low O:C bound of the molecular corridor (linear alkanes CnH2n+2 with O:C=0), the lower dotted line indicates the high O:C bound (sugar alcohols CnH2n+2On with O:C=1). (b) Measured (circles) and estimated (squares) Tg of organic compounds plotted against molar mass. Organic compounds with measured Tg are from Koop et al.5 and Dette et al.51. The markers are colour-coded by molecular O:C ratio. (c) Predicted Tg using a parameterization developed in this study compared to measured (circles) and estimated (squares) Tg with the Boyer–Kauzmann rule. The solid line shows 1:1 line and the dashed and dotted lines show 68% confidence and prediction bands, respectively.

Figure 1b shows how Tg depends primarily on the molar mass and secondarily on the O:C ratio of the organic molecules, as previously demonstrated by Koop et al.5 and further illustrated in Supplementary Fig. 1a. Based on the available measurement data, we developed a new parameterization of Tg as a function of molar mass and O:C ratio as detailed in the method section. Figure 1c shows that the Tg values predicted with the new parameterization agree well with the Tg values measured in experiments or estimated by the Boyer–Kauzmann rule (see Methods), with a correlation coefficient of 0.93. The Tg of individual compounds can be predicted within ±20 K, however, this uncertainty may be reduced to ±3 K for multicomponent SOA mixtures under ideal mixing conditions.

The parameterization scheme has been implemented into the global chemistry climate model EMAC19 that includes the organic aerosol module ORACLE, based on a computationally efficient description of primary and secondary organic aerosol sources, phase-partitioning and chemical evolution20. ORACLE uses the volatility basis set (VBS) framework21 for distributing SOA oxidation products into four logarithmically spaced volatility bins with effective saturation concentrations C* of 1, 10, 102 and 103 μg m−3, respectively20. In this work the values of molar mass and O:C ratio of oxidation products in different volatility bins were assigned based on molecular corridors17,18 and previous studies (Supplementary Table 1). Tg of dry SOA products in each volatility bin was calculated using the new parameterization. Tg of atmospheric SOA mixed with water due to hygroscopic growth was estimated using the Gordon–Taylor approach5 (see Methods). Sensitivity simulations show that variations of the key parameters including molar mass, hygroscopicity and the Gordon–Taylor constant lead to changes of Tg within 15% (Supplementary Material).

The SOA phase state can be inferred using the inverse ambient temperature (1/T) scaled by the glass transition temperature of SOA, that is, Tg/T. When the ambient temperature is below Tg (that is, Tg/T≥1), an amorphous particle behaves as a solid and kinetic limitations occur; in contrast, when Tg/T<1, a particle exists in semi-solid or liquid states. The threshold between semi-solid and liquid states depends on the so-called fragility of the SOA compounds; in this study, we assume an average fragility value of various organic compounds22, resulting in the threshold of Tg/T≈0.8.

Figure 2 shows global simulations of the annual average of Tg/T at mean RH at the surface, 850 hPa (1.35 km) and 500 hPa (5.5 km), using simulated ambient RH and T data for the years 2005–2009. These global patterns of the SOA phase state are strongly influenced by RH, as an increase leads to a significant decrease of Tg due to hygroscopic growth of particles (Supplementary Figs 2,3,4). Near the Earth’s surface, SOA is mostly liquid in the tropics—including the Amazon rainforest—and in polar air with high RH. This result is consistent with recent particle bounce measurements reporting that SOA particles over the Amazon basin are liquid at RH higher than 80% during both the wet and dry seasons23.

Figure 2: SOA phase state in the global atmosphere.
figure 2

Modelled annual averages of the inverse ambient temperature (1/T) scaled by the glass transition temperature (Tg) of SOA (Tg/T) at the surface, 850 and 500 hPa, respectively, for the years 2005–2009. Tg/T is an indicator of the particle phase state: Tg/T≥1, solid; 0.8<Tg/T<1, semi-solid; Tg/T0.8, liquid. The black squares in the top panel indicate specific areas over the Amazon basin, US, Europe, Sahara, India and East China, respectively (Fig. 3a).

Global modelling of SOA phase state

In mid-latitudes and semi-arid regions such as in the western US, Mexico, Europe, India and Australia, a semi-solid organic phase is predicted. This is in line with measurements showing that organic particles collected in California, Mexico City and Chile may have higher viscosities24. Marine SOA are also predicted to be semi-solid even at high RH, as they typically have a high molar mass and O:C ratio due to extended chemical aging. SOA particles are likely to be amorphous solids in arid regions of the dust belt (for example, Sahara, Arabian, Gobi) in North Africa, the Middle East and Central Asia with low RH. A glassy solid state is predicted over the boreal forest, for example, in Finland at RH of≤30% (Supplementary Fig. 4), in agreement with observations based on particle bounce measurements4, corroborating that SOA particles are amorphous solids.

Convective transport of SOA particles to higher altitudes leads to more frequent occurrence of solid or semi-solid phases as shown in Fig. 2. At 850 hPa solid particles prevail over most of the continents at low and mid latitudes, while particles remain semi-solid or liquid over the continents in the tropics and at high latitudes as well as over the oceans. After further uplifting to 500 hPa, corresponding to an average altitude of about 5.5 km, almost all SOA particles are expected to undergo transition into a glassy solid state. The occurrence of viscous states at low temperature is consistent with recent chamber experiments, showing that α-pinene-derived SOA particles exist in a viscous state at low temperatures corresponding to the cirrus cloud altitude region of the free troposphere25.

Figure 3a shows the mean vertical profiles of Tg/T calculated for selected regions in the Amazon basin, Europe, East China, US, India and Sahara, as specified by black boxes in the top panel of Fig. 2. Over the Amazon basin, SOA particles are predicted to remain liquid or semi-solid up to 5 km and are solidified only above about 5 km. Amazonian-SOA particles have relatively low molar mass and O:C, due to the dominance of strong isoprene emissions and shorter chemical aging times, which in combination with relatively high temperature and RH results in low Tg. In contrast, an amorphous solid state is expected for SOA particles at near-surface altitudes over the Sahara, where RH is usually lower than 40% up to 8 km (Supplementary Fig. 5b). Mass concentrations of SOA over the Sahara are very low, being remote from sources, but SOA particles are highly aged due to chemical processing during long-range transport, and thus are expected to have higher molar mass and Tg. In other regions, SOA particles are expected to be liquid up to 2 km in the planetary boundary layer, above which they undergo a glass transition when the temperature becomes lower than 270 K (Supplementary Fig. 5a).

Figure 3: SOA phase state and atmospheric implications.
figure 3

(a) Modelled mean vertical profiles of the inverse ambient temperature (1/T) relative to the glass transition temperature (Tg) of SOA (Tg/T) in specific areas over the Amazon basin, US, Europe, Sahara, India and East China as defined in Fig. 2. (b) Schematic of evolution of SOA phase state as a function of altitude and temperature, which has significant implications for CCN/IN activation, chemical aging and long-range transport. (c,d) Characteristic mixing timescales of (c) water and (d) organic molecules in SOA particles at the surface, 850 hPa and 500 hPa

Characteristic diffusion timescales

As illustrated in Fig. 3b, SOA particles serve as nuclei for clouds and precipitation, sustaining the hydrological cycle26. Figure 3c shows characteristic diffusion timescales (τcd) of water molecules in SOA particles with a diameter of 200 nm. These are of the order of microseconds at the Earth’s surface and seconds at 850 hPa. These timescales are short, so that inhibition of activation of cloud condensation nuclei (CCN) is not expected, in agreement with previous particle trajectory modelling27. In contrast, the particle phase state is fundamental for different ice nucleation (IN) pathways: liquid particles can freeze homogeneously, whereas (semi-)solid particles can be expected to form ice crystals heterogeneously14,16. For example, at 500 hPa, timescales of water diffusion can be up to several hours. In that case, glassy states and solid/liquid core-shell morphologies can persist sufficiently long, so that heterogeneous ice nucleation in the deposition and immersion modes may dominate over homogeneous ice nucleation at lower temperatures (< 240 K)15.

Figure 3d shows global distributions of characteristic mixing timescales of organic molecules within the SOA matrix. They are generally several orders of magnitude larger than mixing timescales of water molecules, because bulk diffusivities of organic molecules are lower than those of water due to their larger molar mass11. Characteristic mixing times are shorter than minutes over oceans, tropics and high latitudes at the surface and 850 hPa, indicating that particles are homogeneously mixed and are likely to be in equilibrium between the gas and particulate phases. However, characteristic timescales are more than a day over dry regions at the surface, over most continental regions at 850 hPa and over the entire globe at 500 hPa, where particles are practically ‘frozen’ and subject to strong kinetic limitations of bulk diffusion of organic molecules. In such conditions, kinetic partitioning8,9,10 may be driving new particle formation and subsequent particle growth in the free troposphere28.


These results have also important implications for long-range transport of persistent organic pollutants and polycyclic aromatic hydrocarbons. There are numerous observations of high concentrations of such hazardous and toxic compounds at remote sites such as the Arctic and the Antarctic29. This is unexpected, as chemical half-lives of these compounds against degradation by atmospheric oxidants such as O3, OH and NO3 have been estimated to be much shorter than the transport timescale. One plausible explanation arising from this study is that toxic compounds are embedded within glassy SOA matrices with low-bulk diffusivities and long mixing timescales, which can effectively shield them from chemical degradation by atmospheric photo-oxidants, facilitating efficient long-range transport in the atmosphere30,31,32.

The results of this study highlight that due to a strong dependence of the particle phase state on RH and ambient temperature, the latter parameters determine the spatiotemporal distributions of SOA phase state worldwide. Several important aspects should be further explored in dedicated studies, such as diel and seasonal variations of the phase state, dependence of phase state on particle size33 and various anthropogenic and biogenic precursors, interactions with inorganic components in particles, and effects of extremely low-volatile organic compounds (ELVOCs)34 as well as particle- and aqueous-phase chemistry35. These results indicate that further development of advanced and detailed formalisms for the SOA lifecycle description in atmospheric models, and the effects on climate, air quality and public health is required.


ORACLE module

The organic aerosol module ORACLE considers the oxidation of alkanes, aromatics and isoprene by OH, and the oxidation of olefins and monoterpenes by O3, OH and NO3 (ref. 20). The global emission inventories of the considered SOA precursors are described in detail in Tsimpidi et al.20. The model system is applied to simulate the period 2005–2009 with a horizontal grid resolution of 1.875° × 1.875° and 31 vertical layers extending to about 25 km altitude (10 hPa). The model system has been evaluated by comparisons to observations, showing good performance in reproducing the spatial distributions and mass concentrations of SOA36.

The VBS approach assumes equilibrium partitioning. Ye et al.37 conducted chamber experiments, and found that α-pinene SOA mixes relatively quickly above 40% RH at room temperature. Liu et al.38 also observed a rapid partitioning of SOA compounds above 20–30% RH for anthropogenic SOA and for all RH values for biogenic SOA. These new studies strongly suggest that kinetic limitations in the bulk may not significantly affect SOA partitioning in the boundary layer, justifying the use of equilibrium partitioning in this part of the atmosphere. As shown in Supplementary Fig. 5c, in the current model, most SOA formation (around 95%) occurs in the boundary layer with conditions similar to the above experimental studies. Therefore, the apparent inconsistency may be relevant to only a small fraction (around 5%) of the SOA formation in this modelling study, and does not significantly affect our results and our conclusions. Application of a model such as the kinetic multi-layer model of gas–particle interactions (KM-GAP39,40) in both the interpretation of laboratory measurements and in the global model should be explored in future work, but is beyond the scope of the current study.

The ORACLE module simulates SOA components with effective saturation concentrations as low as 0.01 μg m−3 at 298 K for SOA from semi-volatile and intermediate volatility compounds. Compounds of even lower volatility (low-VOCs and extremely low-VOCs)34 are not simulated for reasons of computational efficiency and because the predicted OA mass concentration fields are relatively insensitive to their explicit simulation. The simulation of the extremely low volatility compounds is mostly relevant for the prediction of number concentrations due to their role in the formation and growth of new particles41. Nevertheless, these compounds are implicitly included in the corresponding lower volatility bin of the VBS during the fitting of the corresponding smog chamber results. The accuracy of this simplification has been evaluated in previous applications of ORACLE and the comparisons of its predictions with available field measurements36.

Global simulations of Tg

The values of molar mass for anthropogenic and biogenic SOA compounds in different volatility bins were assigned based on molecular corridors as specified in Supplementary Table 1. The slopes of molecular corridors correspond to the increase in molar mass required to decrease volatility by one order of magnitude, –dM/dlogC0, which ranges from 15 g mol−1 for isoprene to 25 g mol−1 for C12 alkane17. According to the corridor slopes, the molar mass in every volatility bin of 1, 10, 102 and 103 μg m−3 was assigned for SOA oxidation products formed from VOCs. Note that the molar mass assigned for the volatility bin of 1 μg m−3 is assumed to have relatively high molar mass based on molecular corridors to compensate for the fact that the current model does not consider lower volatility bins with higher molar mass. The assignment of O:C ratios for each volatility bin was based on previous studies42,43. Both molar mass and the O:C ratio were varied for sensitivity studies to investigate the effects of these parameters on global simulations of Tg.

In this work, we implicitly assume that SOA particles are externally mixed with inorganic compounds such as sulfate and nitrate, similar to the current treatment in most large-scale models. If they were internally mixed, phase separation of organic and inorganic compounds can be expected. Experimental44,45 and modelling46,47,48 studies as well as field observations of phase separated particles49,50 demonstrate that a liquid–liquid phase separation is very likely to occur when O:C<0.5 for the organic fraction, but unlikely (that is, one mixed phase occurs) when O:C>0.7. SOA predicted in this work usually show O:C<0.7 (Supplementary Fig. 1); thus, an organic phase is likely to be phase separated from the inorganic phase. Nevertheless, phase partitioning of internal mixing of organic and inorganic compounds is subject to future studies.

Glass transition temperatures of SOA products in each volatility bin (Tg,i) were calculated using the following parameterization developed in this study, with the average molar mass and O:C ratio of SOA compounds in each volatility bin, assigned based on molecular corridors and previous studies.

The units of Tg,i and M are K and g mol−1, respectively, while O:C is dimensionless. Values of coefficients (A, B, C, D, E) were obtained by fitting with multi-linear least squares analysis with 68% prediction and confidence intervals to the experimental Tg of 179 CH and CHO compounds, resulting in A=−21.57 (±13.47) (K), B=1.51 (±0.14) (K mol g−1), C=−1.7 × 10−3 (±3.0 × 10−4) (K mol2 g−2), D=131.4 (±16.01) (K) and E=−0.25 (±0.085) (K mol g−1), respectively. Tg,i is assumed to represent average glass transition temperature of a complex mixture of thousands of organic molecules in each volatility bin. Even though this is an approximation, it is a good starting point for global Tg estimation, making use of the VBS and molecular corridor approach.

Equation (1) was also applied to predict Tg of 654 SOA compounds17 to compare with their estimated Tg (Fig. 1c). The melting points (Tm) of these SOA compounds were calculated by the Estimation Programs Interface Suite software and Tg was subsequently estimated using the Boyer–Kauzmann rule of Tg=g˙Tm with g=0.7 (see validation of this method in Supplementary Fig. 1b)5. As shown in Fig. 1c, equation (1) predicts Tg well and some of the variations in Fig. 1c may be related in part to experimental uncertainties in the determination of Tg, originating from different experimental protocols, temperature calibration issues, differences in sample purity and treatment5,51.

Tg of mixtures of SOA compounds under dry conditions (Tg,org) were calculated using the Gordon–Taylor approach with a linear relationship51: where wi is the mass fraction of organic compound i, which can be derived using mass concentrations of SOA products simulated by the ORACLE module. This equation is a simplified form of the Gordon–Taylor equation that is valid when the Gordon–Taylor constants are equal to 1 (ref. 51). Under humid conditions, SOA particles take up water by hygroscopic growth in response to ambient RH. Tg of organic–water mixtures can be simulated as well using the Gordon–Taylor equation5:

where worg is the mass fraction of organics, Tg,w is the glass transition temperature of pure water (136 K) and kGT is the Gordon–Taylor constant which is assumed to be 2.5 (±1.0) (refs 5, 13).

The Gordon–Taylor approach has been applied and validated for a wide range of mixtures including organic solvent/polymer, water/polymer, molecular organics/molecular organics, as well as water/molecular organics mixtures13,52,53. For SOA compounds the approach has been validated for mixtures of the α-pinene oxidation products 3-MBTCA and pinonic acid51 and we assume that it can be also applied to multicomponent mixtures. It has been pointed out previously that the Gordon–Taylor approach may fail in the case of adduct or complex formation5, which, however, is more likely to occur in binary or ternary mixtures, where the two strongly interacting compounds occur at high mole fractions. However, adduct or complex formation is highly unlikely in multicomponent mixtures such as SOA with hundreds of compounds, because the individual mole fractions are very small. Thus, in multicomponent mixtures particular interactions between individual compounds are more likely to average out, thus favoring a mean-field type Gordon–Taylor approach.

The mass concentration of water (mH2O) absorbed by SOA particles can be calculated using the effective hygroscopicity parameter (κ) as: (ref. 54). The density of water (ρw) is 1 g cm−3, the density of SOA particles (ρSOA) is assumed to be 1.4 g cm−3 (ref. 55), mSOA is the simulated total mass concentrations of SOA and aw is the water activity calculated as aw=RH/100. κ is assumed to be 0.1 (±0.05) based on field measurements56,57,58,59, laboratory experiments60,61,62,63 and global simulations64.

Viscosity (η) can be estimated from the Tg-scaled Arrhenius plot of η versus Tg/T (ref. 22) as shown in Supplementary Fig. 6. This relation depends on the fragility parameter D: larger D leads to Arrhenius (or strong) behaviour, while smaller D leads to fragile behaviour. Typical D values for organic compounds are in the range of 5–20 (ref. 65). As D values for SOA compounds are unknown, we assume D=10 for the base case leading to the threshold of liquid and semi-solid at Tg/T=0.79 (±0.1). Bulk diffusivities of organic molecules (Supplementary Fig. 7) can be converted from viscosities assuming the Stokes–Einstein relation11. Using the derived bulk diffusivities, the characteristic timescales of bulk diffusion (τcd) in a particle with diameter dp can be calculated as τcd=dp2/4π2Db (ref. 11). The Stokes–Einstein relation may break down when Tg is close to T (ref. 66), leading to underestimation of bulk diffusivities, and hence, overestimation of characteristic timescales of the bulk diffusion of organic molecules.

Water diffusivities and characteristic mixing timescales

For the estimation of diffusivities of small molecules (for example, H2O) diffusing through a (semi-)solid matrix, the Stokes–Einstein equation is not applicable11,15,47,66,67. Diffusion coefficients of water (DH2O) in SOA have been estimated using a semi-empirical method of Berkemeier et al.15. The method can estimate water diffusivities over a large range in T and RH, when the glass transition temperature and hygroscopicity of a target organic mixture are known. This is achieved by extrapolating from a reference substance of sucrose68 under the assumption that the target organic mixture is chemically similar to the reference substance and thus exhibits a similar Vogel–Fulcher–Tammann (VFT) parameter B (ref. 22) in the VFT equation15.

A and B for the VFT equation were directly adopted from Zobrist et al.68 as below:

For determination of T0,SOA from T0,suc, target (SOA) and reference (sucrose) substances are compared at identical mass fraction. Given the density of the organic material ρorg (g cm−3) and hygroscopicity κ, the mass fraction of SOA can be calculated at a given RH5.

The water activity in sucrose at the given SOA weight fraction can be calculated as68:

where a=−1, b=−0.99721, c=0.13599, d=0.001688, e=−0.005151, f=0.009607, g=−0.006142 and Tref=298.15. By knowledge of aw,suc, the Vogel temperature of sucrose T0,suc can be calculated as68:

Then, the Vogel temperature of the target substance is given by

This calculation is performed at equal composition (organic mass fraction) and as a function of T and RH. Supplementary Fig. 8 shows that the humidity dependence of water diffusivity in α-pinene SOA obtained using the semi-empirical estimation scheme is consistent with laboratory measurements27. At 298 K, both methods coincide closely over the entire RH range. At lower temperatures, divergence at low RH develops, which is shown here for 260 K. Note, however, that the measurement accuracy is low under these cold and dry conditions. Moreover, such low RH is rare in the troposphere. For example, in the upper troposphere, where the glassy phase state plays a role in affecting ice nucleation processes and thus cloud formation, RH must be at or above ice saturation (Sice=1) before nucleation can occur, corresponding to 72 % RH at 240 K. These differences detected in DH2O between estimates and laboratory measurements are small compared to the large range caused by the altitude-dependent temperature in the atmosphere.

Sensitivity studies

Effects of important parameters including M, O:C, kGT and κ on Tg predictions are examined by sensitivity simulations. Changes of molar masses by 20% in each volatility bin (as specified in Supplementary Table 2) led to variations of Tg of dry SOA by 5–10% over most continental areas (Supplementary Fig. 9). The base case O:C ratio was assigned based on the first-generation SOA products42, which can be considered as the lower end. When the O:C ratio of each volatility bin was increased by 50%, Tg of dry SOA was increased only by 4%, indicating that the impact of O:C ratio is much smaller than that of molar mass. kGT was varied by ±1 (5,51,69), which led to changes of Tg within 10%, and more significant impact is found over higher RH regions (for example, ocean and high latitude; Supplementary Fig. 10). The hygroscopicity parameter also exerts an important effect on the prediction over high RH areas, where a variation of ±0.05 in κ led to changes of Tg by 5–15% (Supplementary Fig. 11).

Data availability

The data that support the findings of this study are available from the corresponding author upon reasonable request.

Additional information

How to cite this article: Shiraiwa, M. et al. Global distribution of particle phase state in atmospheric secondary organic aerosols. Nat. Commun. 8, 15002 doi: 10.1038/ncomms15002 (2017).

Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.


  1. Jimenez, J. L. et al. Evolution of organic aerosols in the atmosphere. Science 326, 1525–1529 (2009).

    CAS  ADS  Article  Google Scholar 

  2. Tsigaridis, K. et al. The AeroCom evaluation and intercomparison of organic aerosol in global models. Atmos. Chem. Phys. 14, 10845–10895 (2014).

    ADS  Article  Google Scholar 

  3. IPCC. Climate Change 2013: The Physical Science Basis. Contribution of Working Group I to the Fifth Assessment Report of the Intergovernmental Panel on Climate Change (eds, Stocker, T. F. et al.) pp 1535 (Cambridge University Press, 2013).

  4. Virtanen, A. et al. An amorphous solid state of biogenic secondary organic aerosol particles. Nature 467, 824–827 (2010).

    CAS  ADS  Article  Google Scholar 

  5. Koop, T., Bookhold, J., Shiraiwa, M. & Pöschl, U. Glass transition and phase state of organic compounds: dependency on molecular properties and implications for secondary organic aerosols in the atmosphere. Phys. Chem. Chem. Phys. 13, 19238–19255 (2011).

    CAS  Article  Google Scholar 

  6. Renbaum-Wolff, L. et al. Viscosity of α-pinene secondary organic material and implications for particle growth and reactivity. Proc. Natl Acad. Sci. USA 110, 8014–8019 (2013).

    CAS  ADS  Article  Google Scholar 

  7. Pöschl, U. & Shiraiwa, M. Multiphase chemistry at the atmosphere–biosphere interface influencing climate and public health in the anthropocene. Chem. Rev. 115, 4440–4475 (2015).

    Article  Google Scholar 

  8. Shiraiwa, M. & Seinfeld, J. H. Equilibration timescale of atmospheric secondary organic aerosol partitioning. Geophys. Res. Lett. 39, L24801 (2012).

    ADS  Article  Google Scholar 

  9. Vaden, T. D., Imre, D., Beranek, J., Shrivastava, M. & Zelenyuk, A. Evaporation kinetics and phase of laboratory and ambient secondary organic aerosol. Proc. Natl Acad. Sci. USA 108, 2190–2195 (2011).

    CAS  ADS  Article  Google Scholar 

  10. Perraud, V. et al. Nonequilibrium atmospheric secondary organic aerosol formation and growth. Proc. Natl Acad. Sci. USA 109, 2836–2841 (2012).

    CAS  ADS  Article  Google Scholar 

  11. Shiraiwa, M., Ammann, M., Koop, T. & Pöschl, U. Gas uptake and chemical aging of semisolid organic aerosol particles. Proc. Natl Acad. Sci. USA 108, 11003–11008 (2011).

    CAS  ADS  Article  Google Scholar 

  12. Kuwata, M. & Martin, S. T. Phase of atmospheric secondary organic material affects its reactivity. Proc. Natl Acad. Sci. USA 109, 17354–17359 (2012).

    CAS  ADS  Article  Google Scholar 

  13. Zobrist, B., Marcolli, C., Pedernera, D. A. & Koop, T. Do atmospheric aerosols form glasses? Atmos. Chem. Phys. 8, 5221–5244 (2008).

    CAS  ADS  Article  Google Scholar 

  14. Wang, B. B. et al. The deposition ice nucleation and immersion freezing potential of amorphous secondary organic aerosol: pathways for ice and mixed-phase cloud formation. J. Geophys. Res. Atmos. 117, D16209 (2012).

    ADS  Google Scholar 

  15. Berkemeier, T., Shiraiwa, M., Pöschl, U. & Koop, T. Competition between water uptake and ice nucleation by glassy organic aerosol particles. Atmos. Chem. Phys. 14, 12513–12531 (2014).

    ADS  Article  Google Scholar 

  16. Murray, B. J. et al. Heterogeneous nucleation of ice particles on glassy aerosols under cirrus conditions. Nat. Geosci. 3, 233–237 (2010).

    CAS  ADS  Article  Google Scholar 

  17. Shiraiwa, M., Berkemeier, T., Schilling-Fahnestock, K. A., Seinfeld, J. H. & Pöschl, U. Molecular corridors and kinetic regimes in the multiphase chemical evolution of secondary organic aerosol. Atmos. Chem. Phys. 14, 8323–8341 (2014).

    ADS  Article  Google Scholar 

  18. Li, Y., Pöschl, U. & Shiraiwa, M. Molecular corridors and parameterizations of volatility in the chemical evolution of organic aerosols. Atmos. Chem. Phys. 16, 3327–3344 (2016).

    CAS  ADS  Article  Google Scholar 

  19. Jöckel, P. et al. The atmospheric chemistry general circulation model ECHAM5/MESSy1: consistent simulation of ozone from the surface to the mesosphere. Atmos. Chem. Phys. 6, 5067–5104 (2006).

    ADS  Article  Google Scholar 

  20. Tsimpidi, A. P., Karydis, V. A., Pozzer, A., Pandis, S. N. & Lelieveld, J. ORACLE (v1.0): module to simulate the organic aerosol composition and evolution in the atmosphere. Geosci. Model Dev. 7, 3153–3172 (2014).

    ADS  Article  Google Scholar 

  21. Donahue, N. M., Robinson, A. L., Stanier, C. O. & Pandis, S. N. Coupled partitioning, dilution, and chemical aging of semivolatile organics. Environ. Sci. Technol. 40, 2635–2643 (2006).

    CAS  ADS  Article  Google Scholar 

  22. Angell, C. A. Formation of glasses from liquids and biopolymers. Science 267, 1924–1935 (1995).

    CAS  ADS  Article  Google Scholar 

  23. Bateman, A. P. et al. Sub-micrometre particulate matter is primarily in liquid form over Amazon rainforest. Nat. Geosci. 9, 34–37 (2016).

    CAS  ADS  Article  Google Scholar 

  24. O'Brien, R. E. et al. Physical properties of ambient and laboratory-generated secondary organic aerosol. Geophys. Res. Lett. 41, 4347–4353 (2014).

    CAS  ADS  Article  Google Scholar 

  25. Järvinen, E. et al. Observation of viscosity transition in α-pinene secondary organic aerosol. Atmos. Chem. Phys. 16, 4423–4438 (2016).

    ADS  Article  Google Scholar 

  26. Pöschl, U. et al. Rainforest aerosols as biogenic nuclei of clouds and precipitation in the Amazon. Science 329, 1513–1516 (2010).

    ADS  Article  Google Scholar 

  27. Lienhard, D. M. et al. Viscous organic aerosol particles in the upper troposphere: diffusivity-controlled water uptake and ice nucleation? Atmos. Chem. Phys. 15, 13599–13613 (2015).

    CAS  ADS  Article  Google Scholar 

  28. Bianchi, F. et al. New particle formation in the free troposphere: a question of chemistry and timing. Science 352, 1109–1112 (2016).

    CAS  ADS  Article  Google Scholar 

  29. Keyte, I. J., Harrison, R. M. & Lammel, G. Chemical reactivity and long-range transport potential of polycyclic aromatic hydrocarbons - a review. Chem. Soc. Rev. 42, 9333–9391 (2013).

    CAS  Article  Google Scholar 

  30. Zhou, S., Shiraiwa, M., McWhinney, R., Pöschl, U. & Abbatt, J. P. D. Kinetic limitations in gas-particle reactions arising from slow diffusion in secondary organic aerosol. Faraday Discuss. 165, 391–406 (2013).

    CAS  ADS  Article  Google Scholar 

  31. Zelenyuk, A. et al. Synergy between secondary organic aerosols and long-range transport of polycyclic aromatic hydrocarbons. Environ. Sci. Technol. 46, 12459–12466 (2012).

    CAS  ADS  Article  Google Scholar 

  32. Shrivastava, M. et al. Global long-range transport and lung cancer risk from polycyclic aromatic hydrocarbons shielded by coatings of organic aerosol. Proc. Natl Acad. Sci. USA 114, 1246–1251 (2017).

    CAS  ADS  Article  Google Scholar 

  33. Cheng, Y., Su, H., Koop, T., Mikhailov, E. & Pöschl, U. Size dependence of phase transitions in aerosol nanoparticles. Nat. Commun. 6, 5923 (2015).

    CAS  ADS  Article  Google Scholar 

  34. Ehn, M. et al. A large source of low-volatility secondary organic aerosol. Nature 506, 476–479 (2014).

    CAS  ADS  Article  Google Scholar 

  35. Ziemann, P. J. & Atkinson, R. Kinetics, products, and mechanisms of secondary organic aerosol formation. Chem. Soc. Rev. 41, 6582–6605 (2012).

    CAS  Article  Google Scholar 

  36. Tsimpidi, A. P., Karydis, V. A., Pandis, S. N. & Lelieveld, J. Global combustion sources of organic aerosols: model comparison with 84 AMS factor-analysis data sets. Atmos. Chem. Phys. 16, 8939–8962 (2016).

    CAS  ADS  Article  Google Scholar 

  37. Ye, Q. et al. Mixing of secondary organic aerosols versus relative humidity. Proc. Natl Acad. Sci. USA 113, 12649–12654 (2016).

    CAS  Article  Google Scholar 

  38. Liu, P. et al. Lability of secondary organic particulate matter. Proc. Natl Acad. Sci. USA 113, 12643–12648 (2016).

    CAS  Article  Google Scholar 

  39. Shiraiwa, M., Pfrang, C., Koop, T. & Pöschl, U. Kinetic multi-layer model of gas-particle interactions in aerosols and clouds (KM-GAP): linking condensation, evaporation and chemical reactions of organics, oxidants and water. Atmos. Chem. Phys. 12, 2777–2794 (2012).

    CAS  ADS  Article  Google Scholar 

  40. Shiraiwa, M. et al. Size distribution dynamics reveal particle-phase chemistry in organic aerosol formation. Proc. Natl Acad. Sci. USA 110, 11746–11750 (2013).

    CAS  ADS  Article  Google Scholar 

  41. Tröstl, J. et al. The role of low-volatility organic compounds in initial particle growth in the atmosphere. Nature 533, 527–531 (2016).

    ADS  Article  Google Scholar 

  42. Murphy, B. N., Donahue, N. M., Fountoukis, C. & Pandis, S. N. Simulating the oxygen content of ambient organic aerosol with the 2D volatility basis set. Atmos. Chem. Phys. 11, 7859–7873 (2011).

    CAS  ADS  Article  Google Scholar 

  43. Hayes, P. L. et al. Modeling the formation and aging of secondary organic aerosols in Los Angeles during CalNex 2010. Atmos. Chem. Phys. 15, 5773–5801 (2015).

    CAS  ADS  Article  Google Scholar 

  44. Song, M., Marcolli, C., Krieger, U. K., Zuend, A. & Peter, T. Liquid-liquid phase separation in aerosol particles: dependence on O:C, organic functionalities, and compositional complexity. Geophys. Res. Lett. 39, L19801 (2012).

    ADS  Google Scholar 

  45. Bertram, A. K. et al. Predicting the relative humidities of liquid-liquid phase separation, efflorescence, and deliquescence of mixed particles of ammonium sulfate, organic material, and water using the organic-to-sulfate mass ratio of the particle and the oxygen-to-carbon elemental ratio of the organic component. Atmos. Chem. Phys. 11, 10995–11006 (2011).

    CAS  ADS  Article  Google Scholar 

  46. Zuend, A. & Seinfeld, J. H. Modeling the gas-particle partitioning of secondary organic aerosol: the importance of liquid-liquid phase separation. Atmos. Chem. Phys. 12, 3857–3882 (2012).

    CAS  ADS  Article  Google Scholar 

  47. Shiraiwa, M., Zuend, A., Bertram, A. K. & Seinfeld, J. H. Gas-particle partitioning of atmospheric aerosols: interplay of physical state, non-ideal mixing and morphology. Phys. Chem. Chem. Phys. 15, 11441–11453 (2013).

    CAS  Article  Google Scholar 

  48. Pankow, J. F. Phase considerations in the gas/particle partitioning of organic amines in the atmosphere. Atmos. Environ. 122, 448–453 (2015).

    CAS  ADS  Article  Google Scholar 

  49. Pöhlker, C. et al. Biogenic potassium salt particles as seeds for secondary organic aerosol in the Amazon. Science 337, 1075–1078 (2012).

    ADS  Article  Google Scholar 

  50. You, Y. et al. Images reveal that atmospheric particles can undergo liquid-liquid phase separations. Proc. Natl Acad. Sci. USA 109, 13188–13193 (2012).

    CAS  ADS  Article  Google Scholar 

  51. Dette, H. P., Qi, M., Schröder, D. C., Godt, A. & Koop, T. Glass-forming properties of 3-Methylbutane-1,2,3-tricarboxylic acid and its mixtures with water and pinonic acid. J. Phys. Chem. A 118, 7024–7033 (2014).

    CAS  Article  Google Scholar 

  52. Roos, Y. Melting and glass transitions of low molecular weight carbohydrates. Carbohydr. Res. 238, 39–48 (1993).

    CAS  Article  Google Scholar 

  53. Hancock, B. C. & Zografi, G. The relationship between the glass transition temperature and the water content of amorphous pharmaceutical solids. Pharm. Res. 11, 471–477 (1994).

    CAS  Article  Google Scholar 

  54. Petters, M. D. & Kreidenweis, S. M. A single parameter representation of hygroscopic growth and cloud condensation nucleus activity. Atmos. Chem. Phys. 7, 1961–1971 (2007).

    CAS  ADS  Article  Google Scholar 

  55. Cross, E. S. et al. Laboratory and ambient particle density determinations using light scattering in conjunction with aerosol mass spectrometry. Aerosol Sci. Technol. 41, 343–359 (2007).

    CAS  ADS  Article  Google Scholar 

  56. Gunthe, S. S. et al. Cloud condensation nuclei in pristine tropical rainforest air of Amazonia: size-resolved measurements and modeling of atmospheric aerosol composition and CCN activity. Atmos. Chem. Phys. 9, 7551–7575 (2009).

    CAS  ADS  Article  Google Scholar 

  57. Rose, D. et al. Cloud condensation nuclei in polluted air and biomass burning smoke near the mega-city Guangzhou, China – Part 2: size-resolved aerosol chemical composition, diurnal cycles, and externally mixed weakly CCN-active soot particles. Atmos. Chem. Phys. 11, 2817–2836 (2011).

    CAS  ADS  Article  Google Scholar 

  58. Roberts, G. C. et al. Characterization of particle cloud droplet activity and composition in the free troposphere and the boundary layer during INTEX-B. Atmos. Chem. Phys. 10, 6627–6644 (2010).

    CAS  ADS  Article  Google Scholar 

  59. Wu, Z. J. et al. Relating particle hygroscopicity and CCN activity to chemical composition during the HCCT-2010 field campaign. Atmos. Chem. Phys. 13, 7983–7996 (2013).

    ADS  Article  Google Scholar 

  60. Lambe, A. T. et al. Laboratory studies of the chemical composition and cloud condensation nuclei (CCN) activity of secondary organic aerosol (SOA) and oxidized primary organic aerosol (OPOA). Atmos. Chem. Phys. 11, 8913–8928 (2011).

    CAS  ADS  Article  Google Scholar 

  61. Duplissy, J. et al. Relating hygroscopicity and composition of organic aerosol particulate matter. Atmos. Chem. Phys. 11, 1155–1165 (2011).

    CAS  ADS  Article  Google Scholar 

  62. Pajunoja, A. et al. Adsorptive uptake of water by semisolid secondary organic aerosols. Geophys. Res. Lett. 42, 3063–3068 (2015).

    CAS  ADS  Article  Google Scholar 

  63. Varutbangkul, V. et al. Hygroscopicity of secondary organic aerosols formed by oxidation of cycloalkenes, monoterpenes, sesquiterpenes, and related compounds. Atmos. Chem. Phys. 6, 2367–2388 (2006).

    CAS  ADS  Article  Google Scholar 

  64. Pringle, K. J., Tost, H., Pozzer, A., Pöschl, U. & Lelieveld, J. Global distribution of the effective aerosol hygroscopicity parameter for CCN activation. Atmos. Chem. Phys. 10, 5241–5255 (2010).

    CAS  ADS  Article  Google Scholar 

  65. Angell, C. A. Entropy and fragility in supercooling liquids. J. Res. Natl Inst. Stand. Technol. 102, 171–185 (1997).

    CAS  Article  Google Scholar 

  66. Power, R. M., Simpson, S. H., Reid, J. P. & Hudson, A. J. The transition from liquid to solid-like behaviour in ultrahigh viscosity aerosol particles. Chem. Sci. 4, 2597–2604 (2013).

    CAS  Article  Google Scholar 

  67. Price, H. C. et al. Quantifying water diffusion in high-viscosity and glassy aqueous solutions using a Raman isotope tracer method. Atmos. Chem. Phys. 14, 3817–3830 (2014).

    ADS  Article  Google Scholar 

  68. Zobrist, B. et al. Ultra-slow water diffusion in aqueous sucrose glasses. Phys. Chem. Chem. Phys. 13, 3514–3526 (2011).

    CAS  Article  Google Scholar 

  69. Dette, H. P. & Koop, T. Glass formation processes in mixed inorganic/organic aerosol particles. J. Phys. Chem. A 119, 4552–4561 (2015).

    CAS  Article  Google Scholar 

Download references


This work was funded by the Max Planck Society. M.S. thanks support by the School of Physical Sciences at UC Irvine. Y.L. was supported by the National Natural Science Foundation of China (grant no. 41405121). We thank H.P. Dette for helpful comments.

Author information

Authors and Affiliations



M.S., Y.L. and U.P. planned the research. A.P.T., V.A.K., S.N.P. and J.L. provided the global simulations. M.S., Y.L., A.P.T., V.K., T.B. and T.K. analysed the data. M.S. and Y.L. wrote the supplement. M.S., Y.L. and U.P. wrote the manuscript. All authors discussed the results and contributed to manuscript editing.

Corresponding author

Correspondence to Manabu Shiraiwa.

Ethics declarations

Competing interests

The authors declare no competing financial interests.

Supplementary information

Supplementary Information

Supplementary Figures, Supplementary Tables and Supplementary References (PDF 7368 kb)

Peer Review File (PDF 1323 kb)

Rights and permissions

This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Shiraiwa, M., Li, Y., Tsimpidi, A. et al. Global distribution of particle phase state in atmospheric secondary organic aerosols. Nat Commun 8, 15002 (2017).

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI:

Further reading


By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.


Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing