Skip to main content

Thank you for visiting You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

Regioselective synthesis of C3 alkylated and arylated benzothiophenes


Benzothiophenes are heterocyclic constituents of important molecules relevant to society, including those with the potential to meet modern medical challenges. The construction of molecules would be vastly more efficient if carbon–hydrogen bonds, found in all organic molecules, can be directly converted into carbon–carbon bonds. In the case of elaborating benzothiophenes, functionalization of carbon–hydrogen bonds at carbon-number 3 (C3) is markedly more demanding than at C2 due to issues of regioselectivity (C3 versus C2), and the requirement of high temperatures, precious metals and the installation of superfluous directing groups. Herein, we demonstrate that synthetically unexplored but readily accessible benzothiophene S-oxides serve as novel precursors for C3-functionalized benzothiophenes. Employing an interrupted Pummerer reaction to capture and then deliver phenol and silane coupling partners, we have discovered a directing group-free method that delivers C3-arylated and -alkylated benzothiophenes with complete regioselectivity, under metal-free and mild conditions.


Benzothiophenes are sulfur containing heterocyclic molecules that when functionalized, are often incorporated into important molecular scaffolds which have found utility in materials science1 and in particular in biology and medicine2,3,4,5,6,7,8. For example, sertaconazole2 is an antifungal medicine and raloxifene3 is used in the prevention of osteoporosis, and other benzothiophenes have promising biological activity in the areas of diabetes4, antibacterials5 and water regulation6 among others7,8 (Fig. 1a).

Figure 1: C3-functionalized benzothiophenes.

(a) Prevalence of C3 functionalized benzothiophene motifs in biologically active molecules including commercial drugs and others with potential in diverse target areas. (b) Traditional methods of C3 C–H arylation of benzothiophenes rely on transition metals and alkylation at C3 is limited in scope and either requires a directing group or exhibits poor regioselectivity. (c) A metal-free approach to benzothiophene C3 C–H arylation and alkylation employing synthetically unexplored benzothiophene S-oxides does not require a directing group and is completely regioselective by virtue of the interrupted Pummerer reaction mechanism which allows the coupling partner to be delivered in a site-selective manner (this work). DG, directing group.

The synthesis of these important molecules can be achieved by construction of one or both rings, or via direct functionalization of the benzothiophene core9,10,11. Due to the ubiquity of C–H bonds, the most efficient methods of C–C bond construction are based on C–H functionalization12,13. Functionalization at C2 of readily available benzothiophenes14 is generally well established due to the increased acidity of the C–H bond15. However, C3 C–H functionalization is underdeveloped. In the absence of a directing group, direct C–H arylation at C3 of benzothiophenes is traditionally accomplished with palladium catalysts and coupling partners such as aryl-halides16,17,18,19, -borons20,21, -silanes22, -sulfonyl chlorides23 and-iodoniums24 (Fig. 1bi). While recent disclosures address the problems associated with harsh conditions, expensive ligands and regioselectivity issues, the risk of metal contamination remains, particularly when the products are intended for human consumption25 or to be used in organic materials where performance can be adversely affected by trace metals26.

In contrast to C3 C–H arylation of benzothiophenes, C3 C–H alkylation is significantly more challenging and methods are in drastically short supply as reported procedures are severely limited and often described in isolation: Friedel–Crafts alkylation at C3 is restricted to benzylation and suffers from poor regioselectivity27, and C–H metallation at C3, whether stoichiometric28 or catalytic with palladium29 (at 100 °C with primary alkyl boronic acids) or iridium30 (at 90 °C with a diazomalonate), requires an ancillary directing group at C2 to selectively activate the C–H bond at C3 (Fig. 1bii).

Herein, we report a method for the completely regioselective, metal-free C3 C–H functionalization of benzothiophenes that utilizes synthetically unexplored benzothiophene S-oxides 1, readily available from straightforward oxidation of benzothiophenes, and phenol, propargyl silane and allyl silane coupling partners, that does not require a conventional directing group (Fig. 1c). This umpolung strategy couples two carbon sites that are inherently nucleophilic and delivers C3-arylated and the more challenging C3-alkylated benzothiophenes under mild conditions, with broad scope. The reaction operates via activation of the S–O bond in benzothiophene S-oxides 1 for an interrupted Pummerer reaction31 with phenol, or allyl- or propargyl-silanes to form intermediates I and II, which are predisposed for charge accelerated [3,3]-sigmatropic rearrangement32, resulting in C–C bond formation, therefore delivering the coupling partner in a perfectly site-selective manner.


Metal-free C3 C–H arylation

Metal-free methods complement synthetic procedures traditionally based upon the use of transition metals33. Recently, we34,35,36,37,38,39,40 and others41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56 reported the metal-free, sulfoxide directed57 C–H functionalization of a variety of molecular scaffolds, which was enabled by an interrupted Pummerer reaction28. Spurred on by these recent achievements, we considered the use of benzothiophene S-oxides 1 for the synthesis of important C3-functionalized benzothiophenes, as the corresponding sulfonium salts I and II, formed after reaction with the coupling partners, lack aromaticity about the five-membered ring and should therefore undergo facile C–C bond formation via [3,3]-sigmatropic rearrangement58, thus delivering unexplored reactivity not accessible in benzothiophenes. Surprisingly, benzothiophene S-oxides have found limited application in synthesis and their chemistry is relatively unexplored59,60,61. In fact, interrupted Pummerer-type reactivity of benzothiophene S-oxides has not been reported until now62,63. In contrast to previous studies exploiting sulfoxide groups to direct metal-free functionalization, our approach avoids the installation and use of a formal directing group, instead we recruit the sulfur intrinsic to benzothiophenes to capture and deliver the coupling partner.

We began our investigation by attempting to couple isolable 5-bromobenzothiophene S-oxide 1a with 4-methylphenol (Table 1). Thus, 1a, readily prepared from the corresponding benzothiophene by straightforward oxidation with mCPBA/BF3·OEt2, was treated with trifluoroacetic acid anhydride (TFAA), and reacted with the phenol coupling partner42,43,46. The interrupted Pummerer reaction and, surprisingly, the resulting [3,3]-sigmatropic rearrangement occurred at or below ambient temperature (cf. Fig. 1c, I). Although the phenol ring is dearomatized during the [3,3]-sigmatropic rearrangement, C–C bond formation is facile due to the lack of aromaticity in the five-membered ring of I58. After rearomatization of the phenol ring, thioacetal 3a was formed (in 67% yield when isolated) and its structure elucidated by X-ray crystallography (Table 1). Upon warming the reaction mixture to 45 °C in the presence of para-toluene sulfonic acid (pTsOH), 3a opened to form the desired C3-arylated benzothiophene 4a in high isolated yield (77%) and complete control over regiochemistry with respect to both C3 of the benzothiophene and the ortho position of the phenol.

Table 1 Metal-free C3 C–H arylation of benzothiophene S-oxides.

In exploring the scope of the phenol coupling partner, we found that various functionality, including bromo (4b,i), iodo (4c), ester (4d), trifluoromethyl (4e), nitro (4g,j), keto (4h), amido (4k) and chloro (4l) were well tolerated, regardless of their position on the phenol ring. 3-Chlorophenol (cf. 4l) and estrone (cf. 4m), containing two inequivalent ortho positions, underwent completely regioselective cross-coupling. In the case of 4m (and later with 4r and 4t), opening of the intermediary thioacetal (cf. 3a) proceeded in higher yield when iodine was used in place of pTsOH (69% versus 30%).

Although many of the employed benzothiophene S-oxides 1 were readily prepared and isolated in 50-85% yield from the corresponding benzothiophenes (for example, those used in the preparation of 4a, 4q, 4t and 4u, and later for 8a, 8b, 8d, 8e and 8j), the chemistry of benzothiophene S-oxides 1 is significantly different to that of aryl sulfoxides and, as previously noted59, certain substitution patterns in 1 favour a formal [4+2] cycloaddition dimerization upon concentration (for example, benzothiophene S-oxides required for the formation of 4f, 4n, 4p, 4r and 4s). Using conditions previously reported for the oxidation of thiophenes64, we were pleased to find that benzothiophenes could be oxidized with mCPBA/BF3·OEt2, worked-up via a simple filtration and directly applied in the metal-free cross-coupling reaction. This protocol enabled access to C3-arylated benzothiophenes 4 derived from unsubstituted benzothiophene S-oxides (cf. 4i-k), and those with versatile bromo substitution at all positions of the benzene ring (cf. 4n, o, r and s), as well as chloro substitution at C5 (4p). Notably, and in contrast to metal-mediated couplings, the process is broadly compatible with the presence of halide substituents allowing further, downstream functionalization of products.

In addition, the nitro group at C5 (cf. 4q), as well as CO2Me (cf. 4t) and phenyl (cf. 4u) at C2, where the corresponding benzothiophene S-oxides were isolable, were also well tolerated. The presence of bromo or cyano substituents at C2 of 1 resulted in a complex mixture, presumably due to the instability of the corresponding thioacetals 3 bearing a leaving group at C2. In the case of C2-CO2Me substituted benzothiophene, spontaneous lactonization between the phenol and ester moieties formed isothiacoumestan 4t which constitutes the core structure of the known antibacterial5 shown in Fig. 1a. Indeed, the 2-(benzothiophen-3-yl)phenol core strcuture is found in molecules that bear a variety of biological activity (cf. Fig. 1a)4,5,6,7,8.

Metal-free C3 C–H alkylation

Moving onto the more challenging C3 C–H alkylated benzothiophenes using the metal-free protocol, we established that both allyl silanes 5 and propargyl silanes 7 successfully couple with benzothiophene S-oxides 1 to deliver a range of C3-allylated (6) and -propargylated benzothiophenes (8) with total regiocontrol (Table 2). The allylation proceeded smoothly with allyl silanes that were unsubstituted (6a) and that contained a β-methyl (6b) substituent, as well as with those bearing reactive functional groups including β-chloromethyl (6c), β-methylacetate (6d), β-ester (6e), β-bromo (6f), γ-keto (6g) and γ-ester (6h) substituents.

Table 2 Metal-free C3 C–H alkylation of benzothiophene S-oxides.

The scope of the C3 C–H propargylation with respect to the benzothiophene S-oxide 1 was found to be broad and enveloped versatile substituents at various positions. For example, substituted benzothiophene S-oxides bearing C2 bromo (8a), cyano (8b), ester (8c), alkyl (8d,e) and phenyl (8f), as well as C5 carrying nitro (8h), bromo (8i) and aryl (8j), and bromo at C6 (8v) furnished C3-alkylated benzothiophenes. Again, a procedure involving in situ oxidation to the benzothiophene S-oxide followed by functionalization proved highly effective (for example, in the formation of 8g).

The propargylic silane coupling partner 7 was also amenable to variation, with various primary silanes containing primary alkyl (8aj,k), alkyl halide (8l), secondary alkyl (8m,n), phenyl (8o) and silyl (8p,q) substituents at the terminal position, as well as unsubstituted propargyl silanes (8r), all undergoing efficient metal-free cross coupling. In addition, more challenging hindered secondary propargyl silanes delivered branched products 8sv that would be inaccessible via conventional C3-alkylation techniques that rely on bromination followed by metalation/electrophilic trapping14. Alkylation product 8q is a key intermediate in the synthesis of an inducer of bacterial biofilms7.

Mechanistic discussion

The mechanisms of the metal-free C3 C–H arylation and alkylation processes are intrinsically related. Based upon our previous and present experimental observations, we propose that an interrupted Pummerer reaction to form I or II, via addition of oxygen of phenols 2 (refs 42, 43, 46) or SE2′ addition of the silanes 5 (refs 34, 35, 45) and 7 (refs 36, 37, 38) to the sulfur of activated benzothiophene S-oxide III, precedes a charge accelerated [3,3]-sigmatropic rearrangement, resulting in complete regioselective C–C bond formation at the expense of a C–H bond (Fig. 2). Due to the rapid [3,3]-sigmatropic rearrangement resulting from the lack of aromaticity in I and II, we were unable to isolate or observe these sulfonium salts. Evidence for these mechanisms, rather than a direct addition to C3 of III, comes by way of the exclusive formation of ortho substituted phenols 4, allylated products 6g and 6h and propargylated products 8; para-substituted phenols 11, C3-allylated benzothiophenes 12 and C3-allenyl benzothiophenes 13 would be expected from direct addition but were not observed.

Figure 2: Mechanism of regioselective metal-free C3 C–H functionalization of benzothiophene S-oxides.

Activated benzothiophene S-oxides III capture nucleophilic coupling partners prior to regioselective delivery to C3 via a charge accelerated [3,3]-sigmatropic rearrangement of intermediates I and II. The expected products of direct addition of nucleophiles to III, the para-substituted phenols 11, alkenes 12 and allenes 13, were not observed. Nu, nucleophile.


In summary, we have described a metal-free approach that harnesses the synthetic potential of benzothiophene S-oxides, readily accessible from benzothiophenes, to generate C3-functionalized benzothiophenes at the expense of C–H bonds. The absolute regiocontrol observed stems from the ability of the activated benzothiophene S-oxide to first capture the nucleophilic coupling partner and then deliver it to C3. The method utilizes readily available coupling partners, has broad scope and by virtue of the facile interrupted Pummerer reaction and charge accelerated [3,3]-sigmatropic rearrangement sequence, the latter facilitated by the non-aromatic benzothiophenium salt intermediates (cf. I and II), operates under mild conditions. This directing group-free method delivers C3-arylated products that map directly onto medicinally relevant scaffolds, and unlike previously reported methods for C3 C–H alkylation of benzothiophenes, the process does not require a directing group at C2, thus making available greater diversity in important benzothiophene scaffolds.



Supplementary Figures 1–61 for the NMR spectra, Supplementary Fig. 62 for the X-ray crystallographic analysis of 3a, Supplementary Tables 1–7 for X-ray crystallographic data, and Supplementary Methods giving full experimental details and the characterization of compounds are given in the Supplementary Information.

General procedure for C3 C–H arylation of benzothiophene S-oxides

To an N2 flushed, oven dried reaction vessel equipped with a magnetic stir bar, benzothiophene S-oxide 1 (0.2 mmol) and CH2Cl2 (1 ml) were added. The mixture was stirred at −40 °C and TFAA (0.3 mmol) was added. After 5 min, phenol 2 (0.3 mmol) dissolved in CH2Cl2 (1 ml) was added and the mixture stirred for 15 min, before removing the cooling bath and stirring the mixture at ambient temperature overnight (16 h). pTsOH (0.4 mmol) was added, and the mixture heated at 45 °C for 5 h. Water (3 ml) was added and the aqueous phase was extracted with CH2Cl2 (3 × 5 ml). The combined organic phases were dried over MgSO4 and concentrated in vacuo. The crude mixture was purified by column chromatography on silica gel to give pure C3-arylated benzothiophenes 4.

General procedure for C3 C–H alkylation of benzothiophene S-oxides

To an N2 flushed, oven dried reaction vessel equipped with a magnetic stir bar, benzothiophene S-oxide 1 (0.2 mmol), silane 5 or 7 (0.3 mmol) and MeCN (1 ml) were added. The mixture was stirred at 0 °C and TFAA (0.3 mmol) was added. The cooling bath was removed and the mixture stirred at ambient temperature overnight (16 h). Saturated NaHCO3(aq) (3 ml) was added and the aqueous phase was extracted with EtOAc (3 × 5 ml). The combined organic phases were dried over MgSO4 and concentrated in vacuo. The crude mixture was purified by column chromatography on silica gel to give pure C3-allylated (6) or -propargylated (8) benzothiophenes.

Data availability

The X-ray crystallographic coordinates for 3a have been deposited at the Cambridge Crystallographic Data Centre (CCDC) under deposition number CCDC 1511568. This data can be obtained free of charge from the CCDC via The authors declare that all other data supporting the findings of this study are available within the article and its Supplementary Information file.

Additional information

How to cite this article: Shrives, H. J. et al. Regioselective synthesis of C3 alkylated and arylated benzothiophenes. Nat. Commun. 8, 14801 doi: 10.1038/ncomms14801 (2017).

Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.


  1. 1

    Takimiya, K., Shinamura, S., Osaka, I. & Miyazaki, E. Thienoacene-based organic semiconductors. Adv. Mater. 23, 4347–4370 (2011).

    CAS  Article  Google Scholar 

  2. 2

    Croxtall, J. D. & Plosker, G. L. Sertaconazole: a Review of its use in the management of superficial mycoses in dermatology and gynaecology. Drugs 69, 339–359 (2009).

    CAS  Article  Google Scholar 

  3. 3

    Muchmore, D. B. Raloxifene: a selective estrogen receptor modulator (SERM) with multiple target system effects. Oncologist 5, 388–392 (2000).

    CAS  Article  Google Scholar 

  4. 4

    Liu, K. et al. Discovery of a potent, highly selective, and orally efficacious small-molecule activator of the insulin receptor. J. Med. Chem. 43, 3487–3494 (2000).

    CAS  Article  Google Scholar 

  5. 5

    Havaldar, F. H., Bhise, S. & Burudkar, S. A facile synthesis of 10-methoxy-4,8-dinitro-6H-benzothieno[2,3-c]chromen-6-one. J. Serb. Chem. Soc. 69, 527–532 (2004).

    CAS  Article  Google Scholar 

  6. 6

    Crombie, A. L. et al. Synthesis and evaluation of azabicyclo[3.2.1]octane derivatives as potent mixed vasopressin antagonists. Bioorg. Med. Chem. Lett. 20, 3742–3745 (2010).

    CAS  Article  Google Scholar 

  7. 7

    Minvielle, M. J., Bunders, C. A. & Melander, C. Indole–triazole conjugates are selective inhibitors and inducers of bacterial biofilms. Med. Chem. Commun. 4, 916–919 (2013).

    CAS  Article  Google Scholar 

  8. 8

    Romagnoli, R. et al. Synthesis and biological evaluation of 2-(30,40,50-trimethoxybenzoyl)-3-aryl/arylaminobenzo[b]thiophene derivatives as a novel class of antiproliferative agents. Eur. J. Med. Chem. 45, 5781–5791 (2010).

    CAS  Article  Google Scholar 

  9. 9

    Nakamura, I., Sato, T. & Yamamoto, Y. Gold-catalyzed intramolecular carbothiolation of alkynes: synthesis of 2,3-disubstituted benzothiophenes from (α-alkoxy alkyl) (ortho-alkynyl phenyl) sulfides. Angew. Chem. Int. Ed. 45, 4473–4475 (2006).

    CAS  Article  Google Scholar 

  10. 10

    Wu, B. & Yoshikai, N. Recent developments in synthetic methods for benzo[b]heteroles. Org. Biomol. Chem. 14, 5402–5416 (2016).

    CAS  Article  Google Scholar 

  11. 11

    Dudnik, A. S. & Gevorgyan, V. in Catalyzed Carbon-Heteroatom Bond Formation (ed. Yudin, A. K.) 317–410 (Wiley-VCH, 2011).

  12. 12

    Hartwig, J. F. Evolution of C−H bond functionalization from methane to methodology. J. Am. Chem. Soc. 138, 2–24 (2016).

    CAS  Article  Google Scholar 

  13. 13

    Gensch, T., Hopkinson, M. N., Glorius, F. & Wencel-Delord, J. Mild metal-catalyzed C–H activation: examples and concepts. Chem. Soc. Rev. 45, 2900–2936 (2016).

    CAS  Article  Google Scholar 

  14. 14

    Kaur, N. Palladium-catalyzed approach to the synthesis of S-heterocycles. Catal. Rev. 57, 478–564 (2015).

    CAS  Article  Google Scholar 

  15. 15

    Bheeter, C. B., Chen, L., Soulé, J.-F. & Doucet, H. Regioselectivity in palladium-catalysed direct arylation of 5-membered ring heteroaromatics. Catal. Sci. Technol. 6, 2005–2049 (2016).

    CAS  Article  Google Scholar 

  16. 16

    Ueda, K., Yanagisawa, S., Yamaguchi, J. & Itami, K. A general catalyst for the β-selective C–H bond arylation of thiophenes with iodoarenes. Angew. Chem. Int. Ed. 49, 8946–8949 (2010).

    CAS  Article  Google Scholar 

  17. 17

    Tang, D.-T. D., Collins, K. D. & Glorius, F. Completely regioselective direct C−H functionalization of benzo[b]thiophenes using a simple heterogeneous catalyst. J. Am. Chem. Soc. 135, 7450–7453 (2013).

    CAS  Article  Google Scholar 

  18. 18

    Yuan, K. & Doucet, H. Access to alternative regioisomers for palladium-catalysed direct arylations of (benzo)thiophenes. ChemCatChem 5, 3495–3496 (2013).

    CAS  Article  Google Scholar 

  19. 19

    Colletto, C., Islam, S., Julia-Hernandez, F. & Larrosa, I. Room-temperature direct β–arylation of thiophenes and benzo[b]thiophenes and kinetic evidence for a Heck-type pathway. J. Am. Chem. Soc. 138, 1677–1683 (2016).

    CAS  Article  Google Scholar 

  20. 20

    Kirchberg, S. et al. Oxidative biaryl coupling of thiophenes and thiazoles with arylboronic acids through palladium catalysis: otherwise difficult C4-selective C–H arylation enabled by boronic acids. Angew. Chem. Int. Ed. 50, 2387–2391 (2011).

    CAS  Article  Google Scholar 

  21. 21

    Yamaguchi, K., Yamaguchi, J., Studer, A. & Itami, K. Hindered biaryls by C–H coupling: bisoxazoline-Pd catalysis leading to enantioselective C–H coupling. Chem. Sci. 3, 2165–2169 (2012).

    CAS  Article  Google Scholar 

  22. 22

    Funaki, K., Sato, T. & Oi, S. Pd-catalyzed β selective direct C–H bond arylation of thiophenes with aryltrimethylsilanes. Org. Lett. 14, 6186–6189 (2012).

    CAS  Article  Google Scholar 

  23. 23

    Yuan, K. & Doucet, H. Benzenesulfonyl chlorides: new reagents for access to alternative regioisomers in palladium-catalysed direct arylations of thiophenes. Chem. Sci. 5, 392–396 (2014).

    CAS  Article  Google Scholar 

  24. 24

    Tang, D.-T. D., Collins, K. D., Ernst, J. B. & Glorius, F. Pd/C as a catalyst for completely regioselective C-H functionalization of thiophenes under mild conditions. Angew. Chem. Int. Ed. 53, 1809–1813 (2014).

    CAS  Article  Google Scholar 

  25. 25

    European Medicines Agency. in ICH Guideline Q3D on Elemental Impurities (London, 2015)

  26. 26

    Usluer, Ö. et al. Metal residues in semiconducting polymers: impact on the performance of organic electronic devices. ACS Macro Lett. 3, 1134–1138 (2014).

    CAS  Article  Google Scholar 

  27. 27

    Clark, P. D. & Mesher, S. T. Benzylation of benzo[b]thiophene using ZnCl2-modified montmorillonite clay. Phosphorus Sulfur Silicon Relat. Elem. 105, 157–162 (1995).

    CAS  Article  Google Scholar 

  28. 28

    Kamila, S., Mukherjee, C., Mondal, S. S. & De, A. Application of directed metallation in synthesis. Part 3: studies in the synthesis of (±)-semivioxanthin and its analogues. Tetrahedron 59, 1339–1348 (2003).

    CAS  Article  Google Scholar 

  29. 29

    Wippich, J., Schnapperelle, I. & Bach, T. Regioselective oxidative Pd-catalysed coupling of alkylboronic acids with pyridin-2-yl-substituted heterocycles. Chem. Commun. 51, 3166–3168 (2015).

    CAS  Article  Google Scholar 

  30. 30

    Xia, Y., Liu, Z., Feng, S., Zhang, Y. & Wang, J. Ir(III)-Catalyzed aromatic C–H bond functionalization via metal carbene migratory insertion. J. Org. Chem. 80, 223–236 (2015).

    CAS  Article  Google Scholar 

  31. 31

    Smith, L. H. S., Coote, S. C., Sneddon, H. F. & Procter, D. J. Beyond the Pummerer reaction: recent developments in thionium ion chemistry. Angew. Chem. Int. Ed. 49, 5832–5844 (2010).

    CAS  Article  Google Scholar 

  32. 32

    Huang, X., Klimczyk, S. & Maulide, N. Charge-accelerated sulfonium [3,3]- sigmatropic rearrangements. Synthesis 44, 175–183 (2012).

    CAS  Google Scholar 

  33. 33

    Sun, C.-L. & Shi, Z.-J. Transition-metal-free coupling reactions. Chem. Rev. 114, 9219–9280 (2014).

    CAS  Article  Google Scholar 

  34. 34

    Eberhart, A. J., Cicoira, C. & Procter, D. J. Nucleophilic ortho-allylation of pyrroles and pyrazoles: an accelerated Pummerer/thio-Claisen rearrangement sequence. Org. Lett. 15, 3994–3997 (2013).

    CAS  Article  Google Scholar 

  35. 35

    Eberhart, A. J., Imbriglio, J. E. & Procter, D. J. Nucleophilic ortho allylation of aryl and heteroaryl sulfoxides. Org. Lett. 13, 5882–5885 (2011).

    CAS  Article  Google Scholar 

  36. 36

    Eberhart, A. J. & Procter, D. J. Nucleophilic ortho-propargylation of aryl sulfoxides: an interrupted Pummerer/allenyl thio-Claisen rearrangement sequence. Angew. Chem. Int. Ed. 52, 4008–4011 (2013).

    CAS  Article  Google Scholar 

  37. 37

    Eberhart, A. J. et al. Sulfoxide-directed metal-free ortho-propargylation of aromatics and heteroaromatics. Chem. Eur. J. 21, 7428–7434 (2015).

    CAS  MathSciNet  Article  Google Scholar 

  38. 38

    Eberhart, A. J. et al. Sulfoxide-directed metal-free cross-couplings in the expedient synthesis of benzothiophene-based components of materials. Chem. Sci. 7, 1281–1285 (2016).

    CAS  Article  Google Scholar 

  39. 39

    Fernández-Salas, J. A., Eberhart, A. J. & Procter, D. J. Metal-free CH–CH-type cross-coupling of arenes and alkynes directed by a multifunctional sulfoxide group. J. Am. Chem. Soc. 138, 790–793 (2016).

    Article  Google Scholar 

  40. 40

    Fernández-Salas, J. A., Pulis, A. P. & Procter, D. J. Metal-free C-H thioarylation of arenes using sulfoxides: a direct, general diaryl sulfide synthesis. Chem. Commun. 52, 12364–12367 (2016).

    Article  Google Scholar 

  41. 41

    Akai, S. et al. Highly regioselective nucleophilic carbon−carbon bond formation on furans and thiophenes initiated by Pummerer-type reaction. Org. Lett. 6, 3793–3796 (2004).

    CAS  Article  Google Scholar 

  42. 42

    Kobatake, T., Fujino, D., Yoshida, S., Yorimitsu, H. & Oshima, K. Synthesis of 3-trifluoromethylbenzo[b]furans from phenols via direct ortho functionalization by extended Pummerer reaction. J. Am. Chem. Soc. 132, 11838–11840 (2010).

    CAS  Article  Google Scholar 

  43. 43

    Murakami, K., Yorimitsu, H. & Osuka, A. practical, modular, and general synthesis of benzofurans through extended Pummerer annulation/cross-coupling strategy. Angew. Chem. Int. Ed. 53, 7510–7513 (2014).

    CAS  Article  Google Scholar 

  44. 44

    Kobatake, T., Yoshida, S., Yorimitsu, H. & Oshima, K. Reaction of 2-(2,2,2-Trifluoroethylidene)-1,3-dithiane 1-oxide with ketones under Pummerer conditions and its application to the synthesis of 3-trifluoromethyl-substituted five-membered heteroarenes. Angew. Chem. Int. Ed. 49, 2340–2343 (2010).

    CAS  Article  Google Scholar 

  45. 45

    Yoshida, S., Yorimitsu, H. & Oshima, K. 2-(2,2,2-Trifluoroethylidene)-1,3-dithiane monoxide as a trifluoromethylketene equivalent. Org. Lett. 11, 2185–2188 (2009).

    CAS  Article  Google Scholar 

  46. 46

    Yanagi, T. et al. Metal-free approach to biaryls from phenols and aryl Sulfoxides by temporarily sulfur-tethered regioselective C−H/C−H coupling. J. Am. Chem. Soc. 138, 14582–14585 (2016).

    CAS  Article  Google Scholar 

  47. 47

    Huang, X. & Maulide, N. Sulfoxide-mediated α-arylation of carbonyl compounds. J. Am. Chem. Soc. 133, 8510–8513 (2011).

    CAS  Article  Google Scholar 

  48. 48

    Huang, X., Patil, M., Farès, C., Thiel, W. & Maulide, N. Sulfur(IV)-mediated transformations: from ylide transfer to metal-free arylation of carbonyl compounds. J. Am. Chem. Soc. 135, 7312–7323 (2013).

    CAS  Article  Google Scholar 

  49. 49

    Peng, B., Geerdink, D., Farès, C. & Maulide, N. Chemoselective intermolecular α-arylation of amides. Angew. Chem. Int. Ed. 53, 5462–5466 (2014).

    CAS  Article  Google Scholar 

  50. 50

    Peng, B., Huang, X., Xie, L.-G. & Maulide, N. A Brønsted acid catalyzed redox arylation. Angew. Chem. Int. Ed. 53, 8718–8721 (2014).

    CAS  Article  Google Scholar 

  51. 51

    Kaiser, D., Veiros, L. F. & Maulide, N. Brønsted acid-mediated hydrative arylation of unactivated alkynes. Chem. Eur. J. 22, 4727–4732 (2016).

    CAS  Article  Google Scholar 

  52. 52

    Kaiser, D., Veiros, L. F. & Maulide, N. Redox-neutral arylations of vinyl cation intermediates. Adv. Synth. Catal. 359, 64–77 (2017).

    CAS  Article  Google Scholar 

  53. 53

    Hu, L., Gui, Q., Chen, X., Tan, Z. & Zhu, G. HOTf-Catalyzed, solvent-free oxyarylation of ynol ethers and thioethers. J. Org. Chem. 81, 4861–4868 (2016).

    CAS  Article  Google Scholar 

  54. 54

    Chen, D. et al. Metal-free O–H/C–H difunctionalization of phenols by o-hydroxyarylsulfonium salts in water. Chem. Sci. 8, 1601–1606 (2017).

    CAS  Article  Google Scholar 

  55. 55

    Hu, G., Xu, J. & Li, P. Sulfur mediated allylic C−H alkylation of tri- and disubstituted olefins. Org. Lett. 16, 6036–6039 (2014).

    CAS  Article  Google Scholar 

  56. 56

    Tayu, M., Higuchi, K., Ishizaki, T. & Kawasaki, T. Thionium-based one-pot construction of homo-/heterodimeric pyrroloindoline from tryptamine. Org. Lett. 16, 3613–3615 (2014).

    CAS  Article  Google Scholar 

  57. 57

    Pulis, A. P. & Procter, D. J. C−H Coupling reactions directed by sulfoxides: teaching an old functional group new tricks. Angew. Chem. Int. Ed. 55, 9842–9860 (2016).

    CAS  Article  Google Scholar 

  58. 58

    Kitamura, T., Zhang, B.-X. & Fujiwara, Y. Novel [4+2]-cycloaddition of 1-phenyl-1-benzothiophenium salts with dienes. experimental evidence for a lack of aromaticity in the thiophene ring. J. Org. Chem. 68, 731–735 (2003).

    CAS  Article  Google Scholar 

  59. 59

    Nakayama, J. & Sugihara, Y. The chemistry of thiophene 1-oxides. Sulfur Rep. 19, 349–375 (1997).

    CAS  Article  Google Scholar 

  60. 60

    Thiemann, T. et al. Cycloaddition of thiophene S-oxides to allenes, alkynes and to benzyne. New J. Chem. 27, 1377–1384 (2003).

    CAS  Article  Google Scholar 

  61. 61

    David, E., Perrin, J., Pellet-Rostaing, S., Fournier dit Chabert, J. & Lemaire, M. Efficient access to 2-aryl-3-substituted benzo[b]thiophenes. J. Org. Chem. 70, 3569–3573 (2005).

    CAS  Article  Google Scholar 

  62. 62

    Acheson, R. M. & Stubbs, J. K. The synthesis of some heterocyclic sulphonium salts. J. Chem. Soc. Perkin Trans. 1, 899–903 (1972).

    Article  Google Scholar 

  63. 63

    Pouzet, P., Erdelmeier, I., Dansette, P. M. & Mansuy, D. Synthesis of (4-chlorophenyl)-(1-oxo-1λ4-benzo[b]thien-2-yl)methanone and study of its reactivity towards sulfur- and oxygen-containing nucleophiles. Tetrahedron 54, 14811–14824 (1998).

    CAS  Article  Google Scholar 

  64. 64

    Li, Y., Thiemann, T., Sawada, T., Mataka, S. & Tashiro, M. Lewis acid catalysis in the oxidative cycloaddition of thiophenes. J. Org. Chem. 62, 7926–7936 (1997).

    CAS  Article  Google Scholar 

Download references


We thank EPSRC (Postdoctoral Fellowship to J.A.F.-S.; Established Career Fellowship to D.J.P.), The University of Manchester (Lectureship to A.P.P.; Studentship to H.J.S.) and Novartis (Studentship to H.J.S.) for their generous support.

Author information




H.J.S., J.A.F.-S. and C.H. performed the experiments, analysed the data and prepared the Supplementary Information. A.P.P. and D.J.P. designed the project and wrote the manuscript.

Corresponding author

Correspondence to David J. Procter.

Ethics declarations

Competing interests

The authors declare no competing financial interests.

Supplementary information

Supplementary Information

Supplementary figures, supplementary tables, supplementary methods and supplementary references. (PDF 10487 kb)

Rights and permissions

This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Shrives, H., Fernández-Salas, J., Hedtke, C. et al. Regioselective synthesis of C3 alkylated and arylated benzothiophenes. Nat Commun 8, 14801 (2017).

Download citation

Further reading


By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.


Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing