Observations of volcanoes from space are a critical component of volcano monitoring, but we lack quantitative integrated models to interpret them. The atmospheric sulfur yields of eruptions are variable and not well correlated with eruption magnitude and for many eruptions the volume of erupted material is much greater than the subsurface volume change inferred from ground displacements. Up to now, these observations have been treated independently, but they are fundamentally linked. If magmas are vapour-saturated before eruption, bubbles cause the magma to become more compressible, resulting in muted ground displacements. The bubbles contain the sulfur-bearing vapour injected into the atmosphere during eruptions. Here we present a model that allows the inferred volume change of the reservoir and the sulfur mass loading to be predicted as a function of reservoir depth and the magma’s oxidation state and volatile content, which is consistent with the array of natural data.
The vast majority of volcanic eruptions occur in remote regions and are not observed directly. Recent developments in Earth Observation capability have led to the development of a number of space-based sensors for the purposes of measuring changes in the height of the ground surface and gas emissions before, during and after volcanic eruptions. Images showing the deformation and sulfur dioxide cloud generated during the eruption of Okmok Volcano, Alaska, in 2008, for example, are shown in Fig. 1. Interferometric synthetic aperture radar (InSAR) uses differences in the phase of radar waves returning to the satellite between two or more SAR images to generate maps of surface displacement or digital elevation, typically displayed as ‘fringes’, which are contours of constant phase change. InSAR is particularly valuable for measuring ground deformation at volcanoes with little or no ground-based GPS networks and in addition provides spatially continuous data, allowing the size and shape of the magma source in the crust to be deduced using geometric models1. Observations of volcano ground deformation, however, show that some volcanoes tend to show signficant pre- and syn-eruptive deformation, whilst others do not2; the reasons for these variations are unclear. Sulfur dioxide clouds generated during eruptions that reach the upper troposphere or stratosphere are observed from space using spectrometers operating in the UV (for example, the Ozone Monitoring Instrument (OMI)3) and in the IR (IASI4, Atmospheric Infrared Sounder (AIRS)5). It is apparent that there is no clear relationship between erupted volume (dense rock equivalent, DRE) and the mass of sulfur gases emitted during an eruption6, creating challenges for reconstructing the magnitudes and climate impacts7,8 of past eruptions recorded as sulfate spikes in ice cores9 and for predicting the impacts of potential future eruptions. Geochemical and geophysical observations of volcanic eruptions are becoming ever more precise, frequent and spatially resolved10,11,12, yet they are rarely considered in tandem, despite the fundamental link between them.
Two important features of these data sets may be explained by the presence of a gas phase co-existing with the magma in the storage area before eruption. First, is observed that the mass of sulfur present in the co-eruptive gas cloud during explosive eruptions is not clearly related to the mass of magma erupted, nor to the eruption column height6. The total mass of sulfur in the cloud usually far exceeds that expected from the degassing of the erupted magmas based on the concentration of sulfur in melt inclusions6. This difference may be ascribed to the presence of a pre-eruptive vapour phase into which the sulfur partitions strongly13. Secondly, volcanic eruptions are often preceded by periods of uplift and accompanied by periods of subsidence, linked to magma intrusion, eruption and cooling and degassing of magmas2,14. The inferred volume change of the reservoir observed syn-eruption, however, is often many times less than the volume of magma erupted at the surface (corrected for density difference). This difference in volume is controlled by the balance between the compressibility of the magma, including that of any exsolved gas phases, and the material properties of the host rock, a feature highlighted by numerous previous studies1,15,16,17,18,19,20,21,22,23. The total mass of exsolved vapour is difficult to quantify independently however, and this lack of understanding leads to a lack of constraint on inferred volume changes from inverse modelling of InSAR observations.
The exsolved gas phase that causes the magma to be highly compressible is comprised of the primary magmatic volatile species water (H2O), carbon dioxide (CO2), sulfur gases (H2S and SO2) and minor species involving carbon and halogens (for example, CO, HCl, HF, alkali halides). Thermodynamic saturation models for mixed volatile species are now well established, based on gas–melt and gas–gas equilibria of the type: 2CO+O2⇔2CO2 and 2H2S+3O2⇔2SO2+2H2O (refs 24, 25, 26). Sulfur partitioning in such models is constrained by experiments that quantify the abundance of sulfur in magmatic vapour in equilibrium with melts over a range of melt compositions, oxidation states and pressures27,28,29, which have shown that in general sulfur partitioning into vapour increases during decompression and is heavily controlled by the relative abundance of sulfide (S2−) over sulfate (SO42−), which is in turn governed by oxygen fugacity, and melt composition30. Thus the abundance of sulfur in the gas phase coexisting with magma is a sensitive tracer of these parameters.
Traditionally, the magnitude of sulfur emissions into the atmosphere during explosive volcanic eruptions (measured by space-borne sensors) has been simply compared with the volume of magma erupted and its composition, to infer an ‘excess sulfur’ problem, whereby the mass of sulfur emitted is orders of magnitude larger than that which can be accounted for by the concentration of sulfur in pre-eruptive melts as sampled by melt inclusions6. Our enhanced understanding of sulfur behaviour in recent years however, has fully reconciled the observations with the presence of a pre-eruptive vapour, first proposed on the basis of observations13 and later confirmed experimentally31 and modelled26. Now a large database of sulfur emissions from volcanoes exists5, but there have been very few attempts20,23 to fit these observations into this now well-established theoretical framework for sulfur gas–melt partitioning and none reconciling the geochemical features of the magmatic vapour with the consequences for magma compressibility. This approach clearly has enormous potential for strengthening our constraints on pre-eruptive magma storage conditions.
Here we present a novel approach aimed at creating a model to reconcile satellite-based observations of surface deformation and atmospheric sulfur mass loading during discrete explosive volcanic eruptions. In doing so, the sensitivity of ground deformation and gas emissions to the intrinsic magma storage and bulk volatile contents of the magma will be explored.
The model combines a thermodynamic model of volatile saturation and partitioning25, which describes the composition of a gas phase in equilibrium with melt as a function of volatile content, melt composition, temperature, pressure and oxidation state, with a physical model describing the magma compressibility effects caused by the exsolved gas19, illustrated in Fig. 1c. The model predicts sulfur mass loading and the magnitude of the reservoir volume change as inferred from geodetic observations at the surface. The magnitude of the reservoir volume change, which may be compared with the erupted volume (DRE) using the notation r, which may be defined as the ratio between the erupted volume (Ve) and volume change of the subsurface reservoir (ΔVc), given by15 . Three theoretical possibilities can be envisioned for a spherical source: firstly, if the magma is considered incompressible, the reservoir volume change would be equal to the erupted volume (r=1). Secondly, for a gas-free but slightly compressible magma, the reservoir volume change will be less than the erupted volume (r>1). Thirdly, an exsolved volatile phase in the magma will increase its compressibility by an order of magnitude, thus the eruption of a significant volume of material is accommodated by expansion of the remaining magma causing relatively little volume change of the reservoir16,17,18,32 (r>>1). We note that assumptions about geometry and material property are required to infer subsurface volume change from the surface displacements observed by geodetic techniques such as GPS and InSAR. As our goal is to establish a framework for reconciling observations of gas and deformation, we consider the simplest geometry—that of a spherical source—and use derived values of volume change from published studies. It is our intention that future studies refine this framework for specific circumstances, and the influence of these assumptions are discussed in Supplementary Material.
The model predicts the sulfur mass loading, MS and change in reservoir volume, expressed as a ratio r, to the erupted volume based on a set of input parameters (total H2O, total CO2, oxidation state, melt composition), which may then be compared with space-borne observations (Fig. 1; Supplementary Table 1). The results of the model for a generalized metaluminous rhyolitic magma composition are shown in Fig. 2. Partitioning of sulfur into vapour in the pre-eruptive magma reservoir varies over orders of magnitude for the conditions studied (particularly upon varying the water content of the melts and the magma’s oxygen fugacity) and in all cases decreases with depth, with partition coefficients comparing well to those from experimental studies30,31. As a consequence, the mass of sulfur expected to be present in the co-eruptive atmospheric cloud per 1 km3 magma ranges over several orders of magnitude, as is also observed for natural eruptions (Fig. 3; Supplementary Table 1). The H2O and CO2 contents of the magma, as well as the oxidation state, are all important for controlling the partitioning of sulfur into a vapour, or gas phase in the crustal magma reservoir before eruption and hence determining how large (in mass) the co-eruptive sulfur cloud that is observed from space is. In particular, the oxidation state of magma exerts a primary control on sulfur exsolution, owing to the much higher solubility of the sulfur existing as SO42− over S2− (ref. 33). In contrast, the melt H2O content is the main control on magma compressibility; the effect of oxidation state is negligible (this is because sulfur makes up such a small proportion of the gas phase). The model also allows prediction of melt volatile contents and the composition of volcanic gases in equilibrium with the magma pre-eruption (Supplementary Fig. 1).
The ratio r, which is proportional to magma compressibility (via equation (2), Methods), is predicted to increase with decreasing magma reservoir depth from a minimum of around 1.05 (governed by crustal properties, see methods) up to a value of >40 for magmas stored at depths of <2 km before eruption (Fig. 2). For magma reservoirs at 3–4 km in the crust, the r value is predicted to be 10–20 (assuming no gas loss). Magma compressibility scales with the first derivative of density with respect to pressure (equation (1), Methods), and so r is largest for eruptions tapping magma from the shallowest parts of the system. While the value of r is not affected significantly by the bulk CO2 in the system, or by magma oxidation state (Fig. 2), it is affected significantly by the bulk magmatic H2O content. Increasing the magma H2O content from 6 to 10 wt% increases r from 2 to 7 for a magma reservoir at 6 km, and from 7 to around 14 for a magma reservoir at 4 km depth (Fig. 2). For magma reservoirs deeper than around 8 km, the r value is predicted to be close to the incompressible case (∼1.4) for all but the most water-rich magmatic systems.
Comparison to natural data for volcanic eruptions
Data for sulfur yields (outgassed sulfur divided by erupted volume (DRE) and r values (erupted volume DRE/volume change of modelled source from deformation data) are shown in Fig. 3 and Supplementary Table 1. Where the eruptions transition from an initial explosive phase into a longer-lived effusive phase, as is common, we use data for the initial explosive phase only, such that the observed deformation and gas cloud is the result of a short-lived discrete event, therefore maximizing the possibility that the two signals are causally linked. Observations of volcanic eruptions yield r values of up to a maximum of around 14 and sulfur yields (sulfur outgassed per km3 DRE magma erupted) up to a maximum of 34 Tg km−3 but more commonly up to around 5 Tg km−3 (Fig. 3; Supplementary Table 1) (equivalent to 2,000 p.p.m. sulfur in the bulk magma). These apparent maxima in ‘natural’ sulfur yields and in the ratio r may be related to the coupling of the magma and the exsolved vapour phase in the magma storage region before eruption. The porosity of magma with 6 wt% H2O and 0.1 to 1 wt% CO2 is predicted to reach 25–40% for an r value of 10 (Supplementary Fig. 2). For isobaric, crystal-free magma the ‘percolation threshold’ occurs at a porosity of 30%, at which point uniform spherical bubbles begin to overlap34. The resulting increase in permeability allows the gas to escape, perhaps placing a limit on the proportion of gas in the reservoir and hence on values of MS and r. The presence of significant amounts of crystals in the magma is expected to modify porosity–permeability relationships further. Experiments using analog materials have shown that crystals significantly alter the bulk rheological properties of magmas, leading to a range of gas transport behaviours involving fingering and quasi-brittle fracturing35,36.
There are only a handful of eruptions for which both the sulfur yield and the r value has been measured or observed (Figs 3 and 4; Supplementary Table 1). Within these natural data there are some significant trends. The sulfur yield (in Tg km−3 magma erupted) shows a positive correlation with the total sulfur emitted (Fig. 3b). Within these data, the sulfur yields for andesites appear to elevated over those for rhyolites, consistent with previous studies6. In contrast to previous studies6, our data show no clear relationship between erupted magma volume (DRE) and the mass of sulfur emitted syn-eruption. From our data set of recent eruptions, the Nabro eruption gave rise to one of the largest sulfur yields (18 Tg km−3 magma); and Chaiten the lowest (0.008–0.01 Tg km−3). These features of the data may be explained by some eruptions tapping a zoned magma reservoir, where exsolved gases have accumulated at the top of the magma body, giving rise to extremely gas-rich eruptions, as suggested by Wallace and Carmichael37. Alternatively, there may be other first order thermodynamic controls on the pre-eruptive exsolution of sulfur into vapour from magmas, as we show in Fig. 2. It is likely that both processes are important and we show the vectors corresponding to the effects of these factors on both the sulfur yield of eruptions and on the ratio r in Fig. 4.
The sulfur yield of an eruption is controlled by the accumulation of gases at the topmost portions of the magma reservoir, as recently suggested for Soufrière Hills38, the bulk volatile content of the magma, and the oxidation state. Highly oxidized magmas, which may saturate anhydrite early33,39, are likely to produce sulfur-poor vapour (or gas) and sulfur-poor eruption clouds (Fig. 4)31,40. Increasing the magma CO2 content from 0.1 to around 1 wt% has the effect of more sulfur partitioning into the gas phase. Inherently sulfur-rich melts (high fS2) or reduced magmas (low fO2) will tend to saturate sulfide early and hence remove sulfur available for outgassing41. The change of reservoir volume, and hence surface deformation, is expected to be most muted (that is, high r) for shallow magma reservoirs, for very water-rich magmas, or for gas-rich magma reservoir caps15,21. The deformation response will be strongest (low r) for magma reservoirs that are poor in exsolved gases and magmas that are poor in H2O (Fig. 4). The plot of r value against sulfur yield for explosive volcanic eruptions (Fig. 4) shows that in general, as expected, the shallower magma reservoirs give rise to lower sulfur yields and higher r values (that is, more muted deformation). Conversely, deeper magma reservoirs generally give rise to higher sulfur yields and changes in source volumes which match the erupted volumes. The effects of a more or less compliant chamber (determined by the crustal shear modulus and reservoir geometry) would tend to decrease or increase r respectively, whilst not affecting the sulfur yield of the eruption, but insufficient data are currently available to test this aspect of our theory. There is a hint that crystal-free rhyolitic eruptions in arcs produce low sulfur yields and low r, andesitic eruptions in arcs produce high sulfur yields over a range of rand basaltic eruptions in a range of settings display diverse behaviour.
We illustrate the combined modelling approach using two case studies from Fig. 1; the first representing perhaps the standard case, the second an end member, illustrating the range of possible behaviour. An explosive eruption occurred at Okmok Volcano on 12th July 2008 which ejected 0.15 Tg SO2 (refs 42, 43) into the stratosphere, which was tracked across North America44. The eruption was followed by a period of subsidence45. A total of 0.26 km3 (DRE) magma was erupted over the course of the eruption in the form of ash-rich explosions43. The erupted magma was a crystal-poor basaltic andesite bearing plagioclase, olivine and clinopyroxene phenocrysts, thought to have been remobilized by an intruding, more mafic magma43. The magma reservoir was inferred to be at around 3 km depth in the early stages of the eruption, with deeper levels, up to 6 km, evacuated later in the eruption (from inversion of InSAR data45), which is supported by melt inclusion H2O concentrations, which range from 0.6 to 3.6 wt% (ref. 43). The r value (8.7; Fig. 1, Supplementary Table 1) and the sulfur yield (0.29 Tg km-3) for the initial 13 h of the eruption are consistent with magma being evacuated from a storage region at 3 km (Supplementary Fig. 3A), with a magma oxidation state of NNO+1, a bulk H2O content of ∼3–4 wt% and bulk CO2 content of 0.5–1.0 wt%, which is a reasonable range for arc magmas46. These pre-eruptive magma conditions can explain both the magnitude of the deformation signal as well as the sulfur yield. This analysis takes no account of sulfur supplied from intruding mafic magma.
The Chaiten eruption, in Chile in May 2008, was a rhyolitic plinian eruption with a VEI (volcanic explosivity index) of 4 and an eruption column that reached 19 km above sea level during a sequence of explosive events over six days47. Geodetic (InSAR) data constrained the magma reservoir to be a sill-shaped body at a depth of >6 km (ref. 48). The sulfur burden to the atmosphere associated with these eruptions was small, only 0.01 Tg SO2 (ref. 49). Erupted rhyolitic pumices were very crystal poor50; the very low crystallinity prevents constraints on the magma volatile content from melt inclusion data, but petrological experiments suggest that the magma was saturated with respect to H2O at pressures of up to ∼190 MPa (ref. 50). One explanation for the very sulfur-poor gas cloud accompanying the eruption might be a particularly oxidized magma (Fig. 2). We find that the constraints provided by the difference between the modelled volume and erupted volumes (an r value of 2.8–6.0), the low sulfur burden49, a magma reservoir depth of >6 km (ref. 48) and a vapour-saturated magma50 may be satisfied by magma containing a bulk H2O content of >7 wt% (with a CO2 content of 0.1 wt%) and an oxidation state 2–3 log units above the NNO buffer (Supplementary Fig. 3B). A high fO2 may cause the vapour-melt partitioning behaviour of sulfur (as S6+) to be severely damped30,31,40 resulting in a low sulfur mass in the ejected gas cloud (which would have been mostly comprised of water vapour). The high magmatic water content would have yielded a large r value despite the relatively deep magma chamber (Supplementary Fig. 3B). The model used to calculate the subsurface volume change for eruption is that of a sill48, a geometry that is significantly more compressible than a spherical source used by our proposed model (see Methods and Supplementary Material for discussion)51. The inferred reservoir volume change and value of r are only slightly affected by this assumption, but there is an inherent tradeoff between magma and reservoir compressibility in equation (2). Thus, to achieve an equivalent value of r, a more compressible chamber requires a more compressible magma, and it is likely that we actually underestimate the magma compressibility and hence the magmatic water content. Alternatively, the low sulfur yield may be due to either (a) an inherently sulfur-poor primary melt, which seems unlikely on the basis of global trends52 or (b) a lack of a pre-eruptive magmatic vapour phase (much of the sulfur would be expected to reside in the vapour phase at lower oxygen fugacities, ∼NNO+1 (ref. 27)), but this is unlikely on the basis of the muted deformation signal observed (high r; Figs 3 and 4).
Our approach is the first to attempt to reconcile diverse global geophysical and geochemical observations of volcanic eruptions from space and is intended to be an initial framework for enhanced understanding, providing a basis from which to improve and diversify volcanic eruption modelling. There are of course caveats to this study: the magnitude and time-dependency of volcano deformation may be influenced by the thermal state of the crust and any viscoelastic component of deformation; deformation arising from dyke emplacement and ascent will be superimposed onto the deflation signal accompanying magma withdrawal from a deep reservoir; magmas might outgas sulfur (and other species) during ascent to the surface, which will contribute sulfur to the eruption cloud that is not linked to the volume systematics. Magmas might outgas sulfur but not erupt; this would lead to higher sulfur yields per unit volume of magma erupted. We have attempted to minimize these aspects by focussing on discrete explosive eruptions which have short and well defined deformation signals and which involve rapid magma decompression and explosive eruption into the upper troposphere or stratosphere. As observations become better constrained and measurements more precise we anticipate that integrated modelling of this kind will become commonplace and there is scope for additional layers of complexity; in particular, the presence of macrocrysts and plumbing system architecture will have a profound influence on gas transport and storage in magmatic mushes and reservoirs which is not yet well understood.
The model DCompress25 is used to generate gas compositions in the system C–S–O–H–Fe during decompression of a melt where, for any volatile species dissolved in a vapour-saturated silicate melt, equilibrium conditions impose that the fugacity of species in the gas phase equals that in the melt53, established using mass balances and the equilibrium constants of the reactions occurring in the gas phase26. The dissolved amounts of the soluble species are determined using solubility laws that are a function of the corresponding species fugacities25. The equilibrium constants for a set of redox reactions involving H–O–S–C are calculated using established thermodynamic data54. For decompression of magma, at each pressure increment the proportion of gas, the composition of gas and melt with respect to the volatile species H2O, CO2, CO2, H2S, SO2 are calculated and the melt, gas and bulk densities. The total moles of gas in the vapour and the volume fraction of the gas phase and the mass fractions of sulfur in the gas and melt phases during closed system degassing may be calculated and from these, the vapour-melt partition coefficient for sulfur (Sfluid-melt). Combining the mass of sulfur in the gas with estimates of erupted magma mass (from field-based estimates) leads to estimates of total sulfur released during explosive eruption (MS), which is equal to the mass of sulfur present in the pre-eruptive gas phase in addition to the mass of sulfur liberated during decompressional degassing.
Also arising from the gas phase calculations are a mass of vapour per unit volume of magma. Using the molar proportions of H2O, CO2 and S gases in the vapour combined with their molar masses, it is possible to calculate the total mass of vapour associated with 1 m3 magma at pressure increments. The molar volumes of the vapour may then be used to calculate a bulk magma density, ρ, at each pressure step, using the Ideal Gas Law and the bulk density may be calculated using an appropriate density for the melt proportion (2,400 kg m−3 for rhyolite; 2,800 kg m−3 for basalt).
Compressibility of the gas phase
The magma compressibility, βmagma, including that arising from this sulfur-bearing gas phase, is given by19:
where βmagma is the bulk magma compressibility (Pa), ρ is magma density (from the outputs of the thermodynamic model, described above) and p is pressure. The volume removed during eruption is accommodated by deformation of the host rock and compressibility of the magma. Therefore, the ratio, r, between the erupted volume (Ve) and the change in volume of a magma reservoir (the ‘Mogi’ source55) (ΔVc) is given by15:
where βc is the chamber compressibility and (where μ is the shear modulus of the host rock17) for a spherical chamber. The compressibility of a spherical cavity is always less than that for an ellipsoidal cavity. For deep prolate sources, , so the difference in compressibility for these cases does not exceed 25%, but for extremely oblate cavities, approximating a circular crack, the difference can be two orders of magnitude21,51. This contrast in compressibility has been applied to dyke intrusions to explain the discrepancy between the volume change of the source and sink15,51.
The shear modulus of crust, μ, in volcanic areas is not well known and ranges from ∼0.1 GPa for very compliant rocks to 30 GPa for non-compliant, or stiff rocks15,56. Compressibility of degassed basalts, βmagma, at crustal depths is in the range 0.6–1.0 × 10−10 Pa−1, resulting, in theory, in a value of r for degassed magma ranging from 1.05 to 9, which encompasses much of the range in the natural data. Improved constraints on the compliance of the crust are clearly needed to refine these models in the future. An equally or perhaps more important control on the range in r is the variability in the value of βmagma, which we predict will extend up to 30 × 10−10 Pa−1 for volatile-rich magmas stored at depths of >3 km, yielding a large range in r, up to 15 for realistic crustal parameters and magma depths.
Uncertainties in satellite-based observations of SO2 clouds
The observations of gas clouds collated for this study are from a number of different sensors on different platforms, but are dominated by observations by the OMI and the AIRS5, which quantify vertical column densities of sulfur dioxide using its characteristic absorption signature in the UV and IR, respectively57,58. The observation of SO2 from space using radiance data is subject to many sources of error and uncertainty5,59, which are summarized here. They may be grouped into uncertainties arising from sensor response (including the OMI ‘row anomaly’60), retrievals (for example, interference with other gases, principally ozone58), local factors (for example, cloud cover, interference by ash61), detection limits3, inherent features of plumes such as SO2 loss by oxidation and dilution59. In this study we have attempted to minimize errors by focussing only on larger, short-lived, discrete explosive eruptions, where gas plumes are injected high into the troposphere and even into the stratosphere. Absolute errors are difficult to constrain, as other ground-based techniques to measure SO2 are likewise subject to errors including those caused by excess scattering of UV radiation62 but attempts have been made to conduct calibration and comparison experiments using opportunistic observations of gas clouds from the ground and from space44,63.
Uncertainties in thermodynamic modelling
The equilibrium constants for the redox reactions in the gas phase in the model Dcompress25 are calculated after54. The solubility laws are constrained experimentally and are given in Table 1 of Burgisser et al.25 The uncertainties within the model arise from exploring the less well constrained parts of the melt–C–O–H–S fluid solubility regime. In the examples we investigate here, we explore standard basaltic and rhyolitic melt compositions, for which there are numerous experimental studies of volatile solubility to draw on, for example, Lesne et al.28 and thus the model is well constrained for these compositions. Estimates of the uncertainties on melt volatile compositions are in general <10% for pressures >1 kbar (ref. 25).
Uncertainties in geodetic estimates of volume change
The observations of volume change in this study are collated from both satellite- and ground-based measurements of surface deformation, both of which are subject to inherent limitations and uncertainties. The ability of InSAR to measure surface deformation is limited by the availability of satellite images and the correlation between the images (the coherence of the interferogram). Coherence is limited by steep slopes, particularly for image pairs with high perpendicular baselines, and surface changes, which are particularly common in vegetated regions, for image pairs with long temporal separation and for interferograms created using short-wavelength instruments (X-band, C-band)64. The uncertainty of the deformation measurement is dominated by the influence of tropospheric water vapour, and is particularly an issue for high relief volcanoes where atmospheric stratification causes systematic error correlated to topography65. Under favourable conditions, long, dense timeseries of InSAR data can give uncertainties better than 1 mm per year66, but for a single interferogram at tropical volcanoes, errors can be as much as 17 cm (ref. 67). For ground-based networks such as GPS, the limitation is typically the number and location of instruments, particularly during large explosive eruptions as near-field sensors are often inoperable or destroyed.
The greatest source of uncertainty is the assumptions required to convert surface deformation into source volume changes. For simplicity, this paper is based on spherical sources within uniform, elastic half-spaces55, but in practice, many more parameters need to be considered, in particular topography and thermal and mechanical heterogeneities68. Of particular relevance here, is the shape of the reservoir, which controls chamber compressibility. The compressibility of a spherical cavity is always less than that for an ellipsoidal cavity. For deep prolate sources, β=1/μ, so errors do not exceed 25%, but for extremely oblate cavities, approximating a circular crack, the difference can be two orders of magnitude21,51. This contrast in compressibility has been applied to dyke intrusions to explain the discrepancy between the volume change of the source and sink15.
All of the data used in this paper have been published in the peer reviewed literature and are given in the Supplementary Material, table 1, which also contains the primary references for each data set.
How to cite this article: Kilbride, B. M. et al. Observing eruptions of gas-rich compressible magmas from space. Nat. Commun. 7, 13744 doi: 10.1038/ncomms13744 (2016).
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Segall, P. Volcano deformation and eruption forecasting. Geol. Soc. London (Special Publications) 380, 85–106 (2013).
Biggs, J. et al. Global link between deformation and volcanic eruption quantified by satellite imagery. Nat. Commun. 5, 3471 (2014).
Carn, S., Krotkov, N., Yang, K. & Krueger, A. Remote Sensing of Volcanoes and Volcanic Processes: Integrating Observation and Modelling Geological Society380, 229–257 (2013).
Carboni, E. et al. The vertical distribution of volcanic SO2 plumes measured by IASI. Atmos. Chem. Phys. Discuss. 15, 24643–24693 (2015).
Carn, S., Clarisse, L. & Prata, A. Multi-decadal satellite measurements of global volcanic degassing. J. Volcanol. Geotherm. Res. 311, 99–134 (2016).
Wallace, P. Volcanic SO2 emissions and the abundance and distribution of exsolved gas in magma bodies. J. Volcanol. Geotherm. Res. 108, 85–106 (2001).
Robock, A. Volcanic eruptions and climate. Rev. Geophys. 38, 191–219 (2000).
Kremser, S. et al. Stratospheric aerosol—observations, processes, and impact on climate. Rev. Geophys. 54, 278–335 (2016).
Vidal, C. M. et al. The 1257 Samalas eruption (Lombok, Indonesia): the single greatest stratospheric gas release of the Common Era. Sci. Rep. 6, 34868 (2016).
Bagnardi, M. & Amelung, F. Space geodetic evidence for multiple magma reservoirs and subvolcanic lateral intrusions at Fernandina Volcano, Galápagos Islands. J. Geophys. Res. 117, B10 (2012).
Wright, T. J. et al. Magma-maintained rift segmentation at continental rupture in the 2005 Afar dyking episode. Nature 442, 291–294 (2006).
McCormick, B. T., Edmonds, M., Mather, T. A. & Carn, S. A. First synoptic analysis of volcanic degassing in Papua New Guinea. Geochem. Geophys. Geosyst. 13, Q03008 (2012).
Wallace, P. J. & Gerlach, T. M. Magmatic vapor source for sulfur dioxide released during volcanic eruptions: evidence from Mount Pinatubo. Science 265, 497–499 (1994).
Caricchi, L., Biggs, J., Annen, C. & Ebmeier, S. The influence of cooling, crystallisation and re-melting on the interpretation of geodetic signals in volcanic systems. Earth Planet. Sci. Lett. 388, 166–174 (2014).
Rivalta, E. & Segall, P. Magma compressibility and the missing source for some dike intrusions. Geophys. Res. Lett. 35, L04306 (2008).
Johnson, D. J. Elastic and inelastic magma storage at Kilauea volcano. US Geol. Surv. Prof. Pap. 1350, 1297–1306 (1987).
Johnson, D. J. Dynamics of magma storage in the summit reservoir of Kilauea volcano, Hawaii. J. Geophys. Res. 97, 1807–1820 (1992).
Johnson, D. J., Sigmundsson, F. & Delaney, P. T. Comment on" Volume of magma accumulation or withdrawal estimated from surface uplift or subsidence, with application to the 1960 collapse of Kīlauea volcano" by PT Delaney and DF McTigue. Bull. Volcanol. 61, 491–493 (2000).
Huppert, H. E. & Woods, A. W. The role of volatiles in magma chamber dynamics. Nature 420, 493–495 (2002).
Jay, J. et al. Locating magma reservoirs using InSAR and petrology before and during the 2011–2012 Cordón Caulle silicic eruption. Earth Planet. Sci. Lett. 395, 254–266 (2014).
Anderson, K. & Segall, P. Physics based models of ground deformation and extrusion rate at effusively erupting volcanoes. J. Geophys. Res. 116, (2011).
Voight, B. et al. Magma sponge hypothesis and stratovolcanoes: case for a compressible reservoir and quasi steady deep influx at Soufrière Hills Volcano, Montserrat. Geophys. Res. Lett. 37, L00E05 (2010).
Anderson, K. R. & Poland, M. P. Bayesian estimation of magma supply, storage, and eruption rates using a multiphysical volcano model: Kīlauea Volcano, 2000–2012. Earth Planet. Sci. Lett. 447, 161–171 (2016).
Burgisser, A. & Scaillet, B. Redox evolution of a degassing magma rising to the surface. Nature 445, 194–197 (2007).
Burgisser, A., Alletti, M. & Scaillet, B. Simulating the behavior of volatiles belonging to the C–O–H–S system in silicate melts under magmatic conditions with the software D-Compress. Comput. Geosci. 79, 1–14 (2015).
Gaillard, F. & Scaillet, B. A theoretical framework for volcanic degassing chemistry in a comparative planetology perspective and implications for planetary atmospheres. Earth Planet. Sci. Lett. 403, 307–316 (2014).
Clémente, B., Scaillet, B. & Pichavant, M. The solubility of sulphur in hydrous rhyolitic melts. J. Petrol. 45, 2171–2196 (2004).
Lesne, P. et al. The solubility of sulphur in hydrous rhyolitic melts. J. Petrol. 52, 1737–1762 (2011).
Fiege, A., Behrens, H., Holtz, F. & Adams, F. Kinetic vs. thermodynamic control of degassing of H2O–S±Cl-bearing andesitic melts. Geochim. Cosmochim. Acta 125, 241–264 (2014).
Zajacz, Z., Candela, P. A., Piccoli, P. M. & Sanchez-Valle, C. The partitioning of sulfur and chlorine between andesite melts and magmatic volatiles and the exchange coefficients of major cations. Geochim. Cosmochim. Acta 89, 81–101 (2012).
Scaillet, B., Clémente, B., Evans, B. W. & Pichavant, M. Redox control of sulfur degassing in silicic magmas. J. Geophys. Res. 103, 23937–23949 (1998).
Mastin, L. G., Roeloffs, E., Beeler, N. M. & Quick, J. E. Constraints on the size, overpressure, and volatile content of the Mount St. Helens magma system from geodetic and dome-growth measurements during the 2004-2006 eruption. US Geol. Surv. Prof. Pap. 1750, 461–488 (2008).
Carroll, M. & Rutherford, M. Sulfide and sulfate saturation in hydrous silicate melts. J. Geophys. Res. 90, C601–C612 (1985).
Rust, A. & Cashman, K. V. Permeability of vesicular silicic magma: inertial and hysteresis effects. Earth Planet. Sci. Lett. 228, 93–107 (2004).
Parmigiani, A., Huber, C. & Bachmann, O. Mush microphysics and the reactivation of crystal rich magma reservoirs. J. Geophys. Res. 119, 6308–6322 (2014).
Oppenheimer, J., Rust, A., Cashman, K. & Sandnes, B. Gas migration regimes and outgassing in particle-rich suspensions. Front. Phys. 3, 60 (2015).
Wallace, P. & Carmichael, I. S. E. Sulfur in basaltic magmas. Geochim. Cosmochim. Acta 56, 1863–1874 (1992).
Christopher, T. et al. Crustal scale degassing due to magma system destabilization and magma gas decoupling at Soufrière Hills Volcano, Montserrat. Geochem. Geophys. Geosyst. 16, 2797–2811 (2015).
Nowak, M. Anhydrite: an important sulfur binder limiting the climatic impact of subaerial volcanic eruptions. Am. Mineral. 100, 341–342 (2015).
Masotta, M., Keppler, H. & Chaudhari, A. Fluid-melt partitioning of sulfur in differentiated arc magmas and the sulfur yield of explosive volcanic eruptions. Geochim. Cosmochim. Acta 176, 26–43 (2016).
Wallace, P. J. & Carmichael, I. S. E. Sulfur in basaltic magmas. Geochim. Cosmochim. Acta 56, 1863–1874 (1992).
Lu, Z., Dzurisin, D., Biggs, J., Wicks, C. & McNutt, S. Ground surface deformation patterns, magma supply, and magma storage at Okmok volcano, Alaska, from InSAR analysis: 1. Intereruption deformation, 1997–2008. J. Geophys. Res. 115, (2010).
Larsen, J. F. et al. The 2008 eruption of Okmok Volcano, Alaska: petrological and geochemical constraints on the subsurface magma plumbing system. J. Volcanol. Geotherm. Res. 264, 85–106 (2013).
Spinei, E. et al. Validation of ozone monitoring instrument SO2 measurements in the Okmok volcanic cloud over Pullman, WA, July 2008. J. Geophys. Res. 115, D00L08 (2010).
Lu, Z. & Dzurisin, D. Ground surface deformation patterns, magma supply, and magma storage at Okmok volcano, Alaska, from InSAR analysis: 2. Coeruptive deflation, July–August 2008. J. Geophys. Res. 115, B00B03 (2010).
Blundy, J., Cashman, K. V., Rust, A. & Witham, F. A case for CO2-rich arc magmas. Earth Planet. Sci. Lett. 290, 289–301 (2010).
Alfano, F. et al. Tephra stratigraphy and eruptive volume of the May, 2008, Chaitén eruption, Chile. Bull. Volcanol. 73, 613–630 (2011).
Wicks, C., de La Llera, J. C., Lara, L. E. & Lowenstern, J. The role of dyking and fault control in the rapid onset of eruption at Chaitén volcano, Chile. Nature 478, 374–377 (2011).
Carn, S. A. et al. The unexpected awakening of Chaitén volcano, Chile. Eos, Trans. Am. Geophys. Union 90, 205–206 (2009).
Castro, J. M. & Dingwell, D. B. Rapid ascent of rhyolitic magma at Chaitén volcano, Chile. Nature 461, 780–783 (2009).
Amoruso, A. & Crescentini, L. Shape and volume change of pressurized ellipsoidal cavities from deformation and seismic data. J. Geophys. Res. 114, B02210 (2009).
Wallace, P. J. Volatiles in subduction zone magmas: concentrations and fluxes based on melt inclusion and volcanic gas data. J. Volcanol. Geotherm. Res. 140, 217–240 (2005).
Scaillet, B. & Pichavant, M. A model of sulphur solubility for hydrous mafic melts: application to the determination of magmatic fluid compositions of Italian volcanoes. Ann. Geophys. 48, 671–698 (2005).
Ohmoto, H. & Kerrick, D. Devolatilization equilibria in graphitic systems. Am. J. Sci. 277, 1013–1044 (1977).
Mogi, K. Relations between the eruptions of various volcanoes and the deformations of the ground surfaces around them. Bull. Earthq. Res. Inst. 36, 99–134 (1958).
Gudmundsson, A. The effects of layering and local stresses in composite volcanoes on dyke emplacement and volcanic hazards. C. R. Geosci. 337, 1216–1222 (2005).
Yang, K. et al. Retrieval of large volcanic SO2 columns from the aura ozone monitoring instrument: comparison and limitations. J. Geophys. Res. 112, D24S43 (2007).
Krotkov, N., Carn, S., Krueger, A. J., Bhartia, P. K. & Yang, K. Band residual difference algorithm for retrieval of SO2 from the Aura Ozone Monitoring Instrument (OMI). IEEE Trans. Geosci. Remote Sens. 44, 1259–1266 (2006).
McCormick, B. T. et al. A comparison of satellite and ground based measurements of SO2 emissions from Tungurahua volcano, Ecuador. J. Geophys. Res. 119, 4264–4285 (2014).
McCormick, B. T. et al. Volcano Monitoring Applications of the Ozone Monitoring Instrument Geological Society380, 259–291 (2013).
Corradini, S., Merucci, L. & Prata, A. Retrieval of SO2 from thermal infrared satellite measurements: correction procedures for the effects of volcanic ash. Atmos. Meas. Tech. 2, 177–191 (2009).
Kern, C. et al. Radiative transfer corrections for accurate spectroscopic measurements of volcanic gas emissions. Bull. Volcanol. 72, 233–247 (2010).
Carn, S. & Lopez, T. Opportunistic validation of sulfur dioxide in the Sarychev Peak volcanic eruption cloud. Atmos. Meas. Tech. 4, 1705–1712 (2011).
Ebmeier, S., Biggs, J., Mather, T. & Amelung, F. Applicability of InSAR to Tropical Volcanoes: Insights from Central America Geological Society380, 15–37 (2013).
Parker, A. L. et al. Systematic assessment of atmospheric uncertainties for InSAR data at volcanic arcs using large-scale atmospheric models: application to the Cascade volcanoes, United States. Remote Sens. Environ. 170, 102–114 (2015).
Hammond, W. C., Blewitt, G., Li, Z., Plag, H.-P. & Kreemer, C. Contemporary uplift of the Sierra Nevada, western United States, from GPS and InSAR measurements. Geology 40, 667–670 (2012).
Heleno, S. I. et al. Seasonal tropospheric influence on SAR interferograms near the ITCZ–The case of Fogo Volcano and Mount Cameroon. J. Afr. Earth Sci. 58, 833–856 (2010).
Masterlark, T. Finite element model predictions of static deformation from dislocation sources in a subduction zone: sensitivities to homogeneous, isotropic, Poisson solid, and half space assumptions. J. Geophys. Res. 108, 2540 (2003).
Prata, A. J., Gangale, G., Clarisse, L. & Karagulian, F. Ash and sulfur dioxide in the 2008 eruptions of Okmok and Kasatochi: insights from high spectral resolution satellite measurements. J. Geophys. Res. 115, D00L18 (2010).
Kelley, K. A. & Cottrell, E. Water and the oxidation state of subduction zone magmas. Science 325, 605–607 (2009).
The authors gratefully acknowledge the support of the Deep Carbon Observatory and DECADE (part of the Reservoirs and Fluxes community), the Natural Environment Research Council (NERC) Centre for the Observation and Modelling of Earthquakes, Volcanoes and Tectonics (COMET), the British Geological Survey and the University of Cambridge Isaac Newton Trust. We thank Paul Segall and two anonymous reviewers for providing reviews which improved the paper enormously.
The authors declare no competing financial interests.
About this article
Cite this article
Kilbride, B., Edmonds, M. & Biggs, J. Observing eruptions of gas-rich compressible magmas from space. Nat Commun 7, 13744 (2016). https://doi.org/10.1038/ncomms13744
Bulletin of Volcanology (2022)
Bulletin of Volcanology (2022)
Nature Reviews Earth & Environment (2021)
Nature Communications (2020)
Dyke intrusion between neighbouring arc volcanoes responsible for 2017 pre-eruptive seismic swarm at Agung
Nature Communications (2019)