HIV-1 virions assemble as immature particles containing Gag polyproteins that are processed by the viral protease into individual components, resulting in the formation of mature infectious particles. There are two competing models for the process of forming the mature HIV-1 core: the disassembly and de novo reassembly model and the non-diffusional displacive model. To study the maturation pathway, we simulate HIV-1 maturation in vitro by digesting immature particles and assembled virus-like particles with recombinant HIV-1 protease and monitor the process with biochemical assays and cryoEM structural analysis in parallel. Processing of Gag in vitro is accurate and efficient and results in both soluble capsid protein and conical or tubular capsid assemblies, seemingly converted from immature Gag particles. Computer simulations further reveal probable assembly pathways of HIV-1 capsid formation. Combining the experimental data and computer simulations, our results suggest a sequential combination of both displacive and disassembly/reassembly processes for HIV-1 maturation.
Formation of the infectious human immunodeficiency virus (HIV-1) particle occurs via two processes: the assembly of spherical immature particles that are non-infectious, as the virus buds out at the plasma membrane, followed by maturation of the viral core1. During maturation, the viral protease (PR) cleaves the Gag polyprotein into its constituents: matrix (MA), capsid (CA), nucleocapsid (NC) and p6, thereby also releasing the SP1 and SP2 peptides2. The interaction between the positively charged NC domain and negatively charged RNA3, in particular the 5′ untranslated, is responsible for the encapsidation of the RNA genome within particles. Protein–protein interactions between CA domains are the driving force for Gag assembly in the immature hexagonal lattice4,5 as well as for CA assembly in the mature capsid6,7,8. Previous computer simulations and theoretical studies have revealed key features of CA self-assembly into conical mature HIV-1 capsids8,9,10,11,12,13,14.
HIV-1 maturation occurs in multiple stages15. Following the first cleavage between SP1 and NC, the NC-RNA complex condenses into a dense material. Subsequent cleavage at the MA-CA junction liberates MA and frees CA-SP1 from membrane attachment. The slowest cleavage is the release of SP1 from the C terminus of CA15,16,17. Proteolytic maturation is essential for infectivity, and PR inhibitors are a key element of current antiretroviral therapies18. A potent maturation inhibitor, bevirimat (BVM), blocks CA-SP1 cleavage and prevents formation of the mature conical capsid19,20,21,22. Recent structural and mutational studies have indicated that the junction between CA and SP1 could act as a molecular switch to regulate immature Gag assmebly and PR cleavage23,24,25,26. Structural analyses of the Gag lattice in mutant viruses that have impaired cleavage of Gag at specific sites suggest that processing is ordered and that the RNA/protein complex (RNP) may maintain a link with the remaining Gag lattice after cleavage27.
While the architectures of immature and mature virions are well characterized5,6,7,8,28,29, the pathway of maturation and the morphological transition process is not well understood. Recent studies have led to two distinct, competing models for the transformation of immature spherical virions to mature virions with conical cores, namely the disassembly/reassembly model and the displacive model4,27,30,31,32,33. In the disassembly/reassembly model, the immature lattice disassembles following PR cleavage, generating a pool of soluble CA molecules from which a mature capsid assembles de novo. Several previous studies provide support for this model. First, based on early cryoelectron tomography (cryoET) observations of (1) virus-like particles (VLPs) with multiple capsids, (2) mature capsids with tip closing defects34 and (3) a correlation between capsid length and membrane diameter28, models of capsid growth, from either the ‘narrow end’34 or the ‘wide end’28 of the capsid, have been proposed. Second, structural studies revealed distinct lattice spacings and different interaction interfaces between the immature and the mature CA lattices, suggesting that the transition involves a complete disassembly of the immature lattice4,35. More recently, cryoET of maturation inhibitor BVM-treated virions displayed a shell that resembles the CA layer of the immature Gag shell but is less complete21. Last, cryoET of budded viral particles comprising immature, maturation-intermediate, and mature core morphologies suggested that the core assembly pathway involves the formation of a CA sheet that associates with the condensed RNP complex and further polymerizes to produce the mature conical core33.
By contrast, the displacive transformation model postulates that maturation involves a direct, non-diffusional remodeling of the immature Gag lattice to the mature capsid lattice30,32. In this model, the immature lattice does not disassemble to form the mature one. Evidence for a displacive model includes: (1) PR cleavage of in vitro assembled CA-SP1-NC tubular assemblies resulted in conversion to mature CA tubes without disassembly32; (2) mutant particles with a cleavage defect at the CA-SP1 site have thin-walled spheroidal shells with lattices displacively transformed into a mature-like lattices31; and (3) recent cryoET observation of multiple, normal-sized cores within a large membrane enclosure, which argues against de novo nucleation and assembly model and suggests a rolling sheet process for CA lattice transformation to conical capsid30.
To examine the sequence of structural changes that take place during maturation, we establish novel in vitro cleavage systems that mimic the maturation process, by digesting purified PR-deficient virions and in vitro assembled Gag VLPs with recombinant HIV-1 PR. We further investigate the effects of BVM and Gag cleavage mutants on the in vitro maturation process. Using computer simulation, we reveal the impact of membrane and genome on mature capsid formation. Integrating our biochemical and structural findings from the in vitro maturation experiments with computer modelling and simulations, we conclude that the HIV-1 maturation pathway is neither simply displacive nor exclusively de novo reassembly, but a sequential combination of both displacive and disassembly/reassembly processes.
In vitro maturation by HIV-1 PR cleavage
To study the structural transitions occurring during HIV-1 maturation, we first established a novel in vitro system to mimic the PR-driven HIV-1 maturation process by digesting purified PR-deficient immature virions with recombinant HIV-1 PR. The viral membranes of immature particles were permeabilized with Triton X-100 to allow recombinant HIV-1 PR access to the viral structural polyproteins. The sequential processing of Pr55gag by PR into its constituents in the in vitro maturation system closely mimicked that of native virions (Fig. 1). Gel analysis of the PR-treated particles revealed efficient release of MA, CA and NC in a time-dependent manner, consistent with the process seen in native virion maturation15. The PR cleavage was also pH-dependent, most efficient at pH 6.0, at which almost all polyproteins were cleaved into CA in 2 h at 37 °C (Fig. 1a), whereas the majority of CA-SP1 remained intact at pH 7.5. Furthermore, cleavage at the CA-SP1 junction was inhibited by the maturation inhibitor BVM (Fig. 1b), indicating that the immature particles are of the correct structure for binding the inhibitor36. Moreover, the MA-CA cleavage site was apparently partially protected by BVM (Fig. 1b), an effect that was not previously observed during HIV-1 maturation37,38. The overall cleavage pattern of Pr55gag by PR, observed in this system, suggested that this system could prove useful for mimicking the process of HIV-1 maturation in vitro.
In parallel, we established a unique system for in vitro maturation of assembled Gag VLPs, using entirely purified recombinant protein components. Immature VLPs were assembled from recombinant Gag protein lacking p6 and most of the MA regions (ΔMA15–100Δp6) together with RNA. We tested the cleavage efficiency with various HIV-1 PR concentrations (Fig. 1c). Under the experimental conditions at pH 6.0, the cleavage process was completed within 2 h in the presence of 3.3 μM PR (Fig. 1c), agreeing well with the results obtained from immature virions (Fig. 1a). As with the immature virions, the process was also time-dependent (Fig. 1d); cleavage between CA-SP1 was slow, and all CA was released within 2 h in the presence of 3.3 μM PR. Intriguingly, the effect of BVM was pH-dependent, with a strong effect at pH 7.4 but a marginal effect at pH 6.0 (Fig. 1e). The CA-SP1 cleavage process was nearly complete at pH 6.0, despite the presence of a high concentration of BVM (40 μM), whereas a majority of CA-SP1 remained intact at pH 7.4. The same pH-dependent BVM activity pattern was also observed with immature virions. It should be noted that the efficiency of CA-SP1 cleavage was also reduced at pH 7.4 compared with pH 6.0 (Fig. 1e), as seen with immature virions (Fig. 1a). Taken together, these data indicate that both in vitro PR cleavage systems recapitulate the HIV-1 maturation process, providing useful tools for characterizing the effects of maturation inhibitors.
CryoEM analysis of in vitro maturation process
To investigate the structural changes on HIV-1 PR cleavage, we carried out cryoEM analysis of the in vitro maturation process described above. The PR-deficient immature virions appeared as membrane-bound spheres of variable sizes, about 100 nm in diameter (Fig. 2a). The Gag lattices, lining the inside of the membrane, were clearly apparent (Fig. 2a inset, arrow). Limited detergent treatment of immature virions resulted in non-homogeneous membrane perforation of immature virions (Fig. 2b). Within a single virion, part of the viral membrane became punctured (Fig. 2b and inset, black arrow), whereas other areas of viral membrane remained intact (Fig. 2b and inset, black arrowhead). In fact, most of the immature particles were broken or fragmented on mild detergent treatment typical for isolating cores39 (Fig. 2b). When the concentration of Triton X-100 was reduced to its critical micellar concentration of 0.02%, we observed, within membrane-enclosed particles, conical structures with an apparent ordered lattice (Fig. 2c), in addition to some ordered densities on the membrane facing outwards that only appear in the PR-treated samples (Fig. 2c, black arrows).
Can such a transition from an immature lattice to a mature lattice take place without membrane and any host cell factors or other viral proteins? To address this question, we used our all recombinant and reconstituted in vitro maturation system and carried out cryoEM analysis of PR-treated Gag VLPs from the same samples analysed biochemically (Fig. 1c,d, marked with an ‘*’). In the presence of yeast transfer RNA (10% (w w−1)), purified recombinant Gag polyprotein assembled very efficiently into spherical particles about 100 nm in diameter with well-ordered surface lattices (Fig. 2d,g). The particles were stable and remained intact after 2 h incubation with digestion buffer (Fig. 1c ‘*1’ and Fig. 2d,g). On completion of PR digestion (Fig. 1c ‘*3’), large clusters, comprising numerous cleavage products, were present (Fig. 2f), in stark contrast to the entirely monodispersed initial Gag VLPs (Fig. 1c ‘*1’ and Fig. 2d). Remarkably, the clustered cleavage products formed conical- or tubular-shaped assemblies, resembling the mature-like structure (Fig. 2i, red arrows), with a cone to cylinder ratio of 57%. Some ‘hybrid’ entities were occasionally observed (Fig. 2i, black arrows and Supplementary Fig. 1), suggesting an incomplete maturation process. We also imaged samples processed with a lower PR concentration (Fig. 1c ‘*2)’. Not surprisingly, we found fewer cones and tubes and more incompletely cleaved particles (Fig. 2e,h and Supplementary Fig. 1), compared with the sample that underwent cleavage to completion. These data suggest that the transition from immature Gag sphere to mature-like conical CA structure can occur without host cell factors, viral membrane or viral proteins other than Gag and PR. Purified CA protein can assemble into cones and tubes in vitro, but this requires high protein concentration (>80 μM) and very high salt (>1 M NaCl)8. Given the relatively low CA concentration (37 μM) and very low salt (near 0 μM NaCl) in our cleavage reactions, de novo assembly of cleaved CA into these structures is unlikely. Taken together, these results support, at least in part, a displacive maturation pathway rather than the disassembly and reassembly process30,32.
CryoEM structures of Gag VLPs and maturation product
To confirm that the assembled spherical Gag VLPs do indeed have an immature lattice, whereas the final cleavage products have mature-like structures, we obtained three-dimensional (3D) density maps of these assemblies by cryoEM. Using cryoET and subtomogram averaging4,5,40, we obtained a 3D density map of Gag VLPs (Fig. 3a) to 18.4 Å resolution by gold-standard Fourier shell correlation (FSC). As shown in Fig. 3b,c, at this resolution, the averaged density map clearly displayed an immature configuration, overlapping well with the previously published immature HIV-1 structure5. Docking of the immature structural model 4USN5 into our density map exhibited a very good fit (Fig. 3b,c), with a cross-correlation coefficient of 0.81. Therefore, the assembled Gag VLPs used for in vitro maturation are indeed in the immature lattice arrangement.
On PR cleavage of Gag VLPs to completion (that is, all Gag molecules converted to CA; Fig. 1c ‘*3’), we observed a small fraction of long tubes that were amenable for structural analysis (Fig. 3d), along with numerous conical or short tube-shaped structures (Fig. 2f,i). Combining the segments from the tubes with the same helical symmetry and using a single particle real space helical refinement approach8,41, we obtained a 3D reconstruction, at 22 Å resolution, of the tubular products that resulted from PR cleavage (Fig. 3e–g). In contrast to the undigested precursor, the tube density map showed an entirely mature-like conformation (Fig. 3e), with hexameric CA subunits arranged in helical arrays, as seen in mature CA assemblies8. The mature CA structural model 3J34 (ref. 8) fitted into the density map very well, further confirming that the tubes have a mature CA conformation. In contrast, docking the mature hexamer 3J34 into the undigested (immature) map and the immature hexamer 4USN into the digested (mature) map resulted in very poor fitting, with cross-correlation coefficient values of 0.39 and 0.4, respectively (Supplementary Fig. 2). More interestingly, unlike our previous in vitro CA tubular assembly, additional densities, likely corresponding to the released NC and RNA, appeared inside these tubes. A similar NC and nucleic acid release concurrent with the formation of mature CA tubes, without CA dissociation, was previously observed on in vitro PR cleavage of CA-NC assemblies32.
CA association following Gag cleavage
We observed only a few conical-shaped structures on in vitro cleavage of PR-defective immature virions (Fig. 2c), a surprising result considering the large number of starting immature particles. One plausible explanation for this paucity of cores is dissociation of CA molecules from the particles on cleavage. To test this, particles were pelleted after PR digestion and particle-associated CA was detected by immunoblotting. As shown in Fig. 4a, a significant amount (>1/3) of CA and CA-SP1 remained pelletable, that is, was associated with the particles or formed aggregates, during the in vitro maturation process, after NC and MA were cleaved from Gag. Given that the viral membranes were permeabilized to allow PR to enter viral particles, which would also allow free CA to leave, the particle-associated CA may have arisen from either conversion from immature lattice without dissociation or via a disassembly/reassembly process. If cleaved CA molecules dissociated from the lattice and reassembled into mature capsid, one might expect from this de novo assembly model that capsid-destabilizing mutations and capsid assembly inhibitors would affect the reassembly process and thus inhibit mature capsid formation. We thus investigated the effect of capsid-destabilizing mutation K203A, which does not assemble into tubes in conditions that wild-type does42, on CA association following Gag cleavage. As shown in Fig. 4b, the K203A CA mutation did not reduce the fraction of CA that remained pelletable following PR treatment. Similarly, the capsid assembly inhibitor CAP-1 did not inhibit the in vitro maturation process (Fig. 4c). These studies suggest that maturation could occur via conversion of the immature lattice to the mature lattice without requiring dissociation of the CA subunits.
On the other hand, in vitro cleavage of Gag VLPs yielded very little associated CA in the pellets (Fig. 4d, WT), in contrast to the PR-deficient immature particles (Fig. 4a). In fact, >95% of the CA dissociated from the particles and was released into the solution (Fig. 4d, WT), consistent with the observed infrequent occurrence of the clustered cleavage products in Fig. 2f,i, seemingly suggestive of a disassembly model. To further investigate the process of in vitro PR cleavage of Gag VLPs, we purified Gag proteins carrying substitutions that prevent cleavage at the MA-CA (Y47I mutation in the construct used, or Y132I in the context of full-length Gag) and CA-SP1 (L278I/M282I mutations, or L363I/M267I in full-length Gag) junctions43. Similar to the corresponding wild-type Gag protein, both mutant proteins efficiently assembled into spherical particles. PR treatment of the assembled Gag mutant VLPs yielded the expected cleavage products, MA-CA and CA-SP1, with >95% of MA-CA and CA-SP1 in the soluble fraction, as seen for CA in the wild-type VLPs. By contrast, the NC protein released from the wild-type Gag protein and both Gag mutants was found in the pellet fraction (Fig. 4d). These studies suggest that the cleavage products, CA, MA-CA and CA-SP1, can dissociate from the particles after removing NC and RNPs.
Role of membrane and genome in the formation of mature core
The conversion of spherical immature particles into conical and tubular CA assemblies, together with the observed dissociation of CA molecules from particles on cleavage, appears to support some aspects of both de novo assembly and simple displacive models. We used computer modelling and simulation to explore the underlying physical mechanisms and constraints that are relevant to capsid assembly.
Building on our previous simulation work44,45,46,47, we used a simple model of viral capsid growth to first investigate the physical impact of the virion membrane on the formation of cylindrical or conical shells. We modelled the membrane as a spherical case, which sets a constraint for the shell growth such that the subunits remain within a sphere of radius, rm. In the model, the membrane–subunit interaction is described as a potential for an interior soft wall, , if , with the distance between the ith vertex of the subunit and the centre of the sphere, and the potential vanishes for subunits within the radius rm. As shown in Fig. 5, the membrane restricts the growth of the otherwise extended incomplete shell (Fig. 5a) and induces local stresses causing formation of the pentamers necessary for the assembly of closed conical or tubular shells (Fig. 5b). We note that the limiting effect of membrane on capsid height was reported by Briggs et al.28. Their data suggest that the cone assembly is initiated at the narrow tip and stops growing when it reaches the membrane at the wide base. While our results agree in that membrane limits the growth, our simulations indicate a different pathway (see Supplementary Movies 1–6). More interestingly, we found that the membrane could exert a force on the growing sheet that breaks the symmetry and causes the shell to grow as a cone rather than a cylinder (Supplementary Movie 1). Statistical analysis of 300 simulations showed that the frequency of forming a conical shell increased to 52% when constrained in the membrane compared with 37% without the membrane (Supplementary Table 1), suggesting that the virion membrane promotes conical shell formation.
To explore the impact of the genome (or RNP) on shell formation, we modelled the genome as a soft ball, due to steric interactions, with the interaction between the genome and the shell presented through the potential, , if , with rg the radius of gyration of the genome (soft ball) and the distance between the ith vertex of the subunit and the centre of the genome. This potential keeps the subunits outside the ball. If , no interaction occurs between the genome and protein subunits (CA). We emphasize that the focus of our simulations is on the role of RNA-NC complexes in the formation of conical versus cylindrical shells, and, as such, the soft ball is a good approximation for RNA only after NC cleavage.
We considered the impact of the genome by using two different models. In the first model, we assumed that a few subunits are attached to the genome but the complexes of the genome subunits are free to move inside the membrane. If the genome remains attached to the growing sheet during the initial stages of the growth process, the conical shell forms with the genome inside (Fig. 5c and Supplementary Movie 2). If the genome detaches from the growing shell early in the growth process, a cylindrical shell forms with the genome outside (Fig. 5c and Supplementary Movie 3). As shown in Supplementary Table 1 and Supplementary Fig. 7, the presence of the genome increased the frequency of cone appearance to 83%, approximately similar to the previously observed cone frequency of 95% (ref. 48).
In the second model, we kept the genome-subunit complexes attached to the membrane during the growth process until about one-sixth of the capsid had formed, at which point, we released the genome-subunit complex. The simulations show that the hexagonal sheet continues to grow asymmetrically along one side of the shell until it meets the membrane, which exerts a force on the shell and makes it roll and grow back towards the RNP (Supplementary Fig. 3 and Supplementary Movie 4). Similar to the first model, if the genome is attached to the growing shell, more conical capsids with genome inside occur, while, if the genome detaches, cylindrical capsids form with the genome outside. In both models, the initial attachment of the genome to the growing shell is important for the formation of a conical shell.
A combination of displacive and disassembly/reassembly pathways
We further investigated capsid formation from a partially formed shell while in an immature state at the time of release from the membrane. Based on the displacive model, we considered that the sheet of capsid proteins retains the same connectivity as Gag proteins in the immature virion. We assumed that the subunits in the immature sheet, containing as many as 600 subunits, undergo some conformational changes without disassembly, resulting in their preferred dihedral angle and flexibility similar to the mature shells. The simulation shows a large sheet of subunits attached to the surface of the spherical membrane and growing. The sheet then detaches from the membrane and subsequently rolls around the genome. Finally, the sheet grows into a closed conical shell in a process identical to the de novo assembly model described above (Fig. 6 and Supplementary Movie 5). The outcome of these simulations depended on the size of the initial immature sheet. For large sheets with around 600 subunits or larger, we observed a decrease in the efficiency of cone formation and an increase in the occurrence of defective cones and cylinders. The sheets with a smaller number of subunits in the initial immature lattice have a much higher probability to grow to cones without defects. When we decreased the number of subunits in the initial ‘immature’ lattice to 400, the lattice rolls around the genome but is not large enough for the two edges to merge immediately. Addition of free CA subunits to the growing sheet results in the formation of cones with almost no defects (Supplementary Fig. 4 and Supplementary Movie 6). In fact, simulation results did not support a direct conversion from the complete immature lattice, as suggested by a simple displacive model. Thus, we conclude that a probable pathway for the formation of conical shells is a sequential combination of displacive rearrangement and growth. Starting with a partially formed immature sheet has the advantage that the entire lattice does not need to disassemble and reassemble; however, a diffusive growth phase appears to be necessary to minimize assembly defects.
It is important to note that we also carried out a number of simulations in the absence of the membrane but in the presence of genome to study the combinatory pathway in situations in which the membrane has been completely removed, as in the case of some experiments. The conical shells were still formed (Supplementary Fig. 5) consistent with the experiments.
Previous studies have led to two competing HIV-1 maturation models, the de novo disassembly and reassembly model and the lattice displacive model, for the conversion of immature Gag lattice to mature conical capsid. In an effort to distinguish between these HIV-1 capsid maturation models, we devised in vitro PR cleavage systems to mimic HIV-1 maturation and monitored the maturation process with biochemical and structural analysis, as well as computer simulations. The results presented in this study challenge aspects of both existing models. Based on our in vitro maturation data and the computer modelling results, we propose a sequential process for maturation in which capsid assembly is initiated by displacive remodelling and capsid growth occurs via soluble subunit addition. The model is illustrated in Fig. 7.
Our results suggest that the de novo assembly model cannot be the sole pathway, given that in vitro PR cleavage of Gag VLPs resulted in conical-shaped structures under conditions that do not support assembly of soluble CA molecules into conical or tubular structures8,48. Consistent with a recent cryoET study with large membranes enclosing multiple capsids30, the size of Gag spheres, rather than the viral envelope membrane, which is absent in our in vitro Gag VLP system, determines the size of the mature capsid. These data are in conflict with the complete de novo disassembly/reassembly model, which predicts that the mature core begins to grow at its narrow or wide end, from nucleation of CA units on one face of the membrane, and stops growing when it reaches the boundary of the membrane on the opposite side28,34. Furthermore, our study, as well as two recent cryoET analyses30,33, have identified the formation of CA sheet-like structures as an intermediate during the maturation process. While Woodward et al.33 interpreted this as a de novo CA assembly product, data from our work and that from Frank et al.30 suggest that these initial CA sheets form through a displacive process. In addition, HIV-1 particles with functional MA-CA cleavage but defective CA-SP1 cleavage (CA5 particles) exhibit a layer morphology that is consistent with the structure of the mature CA lattice15,21,27, indicating that the CA-SP1 layer is formed on release from the membrane and that it is unlikely that most of the CA dissociates from the lattice before capsid assembly. Moreover, in our in vitro PR cleavage assays, capsid-destabilizing mutations and capsid assembly inhibitors had little effect on CA association, further arguing against the simple de novo reassembly model.
On the contrary, our results also argue against an entirely displacive model, as suggested by Frank et al.30, given our observations that a major fraction of CA and CA-SP1 are indeed dissociated from the Gag lattice during in vitro PR cleavage of Gag VLPs lacking the membrane. If the capsid is formed exclusively by the non-diffusional phase transition of immature to mature CA lattice, one would expect to find that the stress and deformations inherent in this process result in defects in the mature CA lattice. In fact, our computer simulations failed to yield a closed mature core when using only the non-diffusional phase transition (Supplementary Movie 7), as the transformation of an elastic sheet to a closed conical shell requires disassembly of many subunits at the growing edge and inclusion of pentamers in the ‘right’ position for the shell to close properly. Therefore, based on our experimental data and computer simulation results, we propose a combinatory pathway for HIV-1 capsid maturation, which begins with non-diffusional transition and followed by CA dissociation and growth.
This sequential displacive rearrangement and growth model is consistent with nearly all the previous experimental observations. An assembly pathway involving both displacive and de novo modes is advantageous as a part of the shell is already built and does not need to reassemble from scratch. The model further implies that the viral membrane, MA and the RNP likely guide the capsid assembly pathway33,49. Interestingly, a recent cryoET study revealed that viral particles with the NC-SP2 domains replaced by a leucine zipper lacked condensed RNPs and contained an increased proportion of aberrant core morphologies50. Consistent with our maturation model, a role for HIV-1 integrase (IN) in initiating core morphogenesis and viral RNP incorporation into the mature core has been recently suggested, and IN has emerged as a maturation determinant51,52. The effect of IN may explain the apparent paradox that in vitro digestion of PR− virions results in 1/3 of CA being pelletable, while there was only ∼5% for in vitro assembled particles, owing to the presence of Pol in PR− virions and perhaps additional virion-associated host factors. Our model also explains the observed potent transdominant effect of uncleavable Gag on viral infectivity, where 4% of Gag with MA-CA linker resulted in a 50% decrease in infectivity16,53,54. The presence of even a few such Gag subunits that remain attached to the membrane would preclude CA lattice sheet detachment, thus inhibiting capsid formation and leading to a disproportionate drop in infectivity. Furthermore, in our in vitro maturation system, the maturation inhibitor BVM not only blocked cleavage of CA-SP1 but also partially protected the MA-CA cleavage site. The immature lattice-stabilizing effect of BVM has been previously observed in cryoET studies21 and is reflected in our new combinatory capsid maturation pathway model. Our model also explains the predominance of conical versus cylindrical structures. We found that any asymmetry developed in the growing lattice due to interaction with the membrane or genome (Fig. 5), or due to the shape of initial immature lattice creates conical capsids, as opposed to cylindrical shells (Supplementary Fig. 6).
While many aspects of the HIV-1 maturation process remain to be explored, our combined biochemical, structural and computational study allows us to integrate our new findings with many previous observations into a new model for HIV-1 maturation. Our model of initial displacive rearrangement from immature Gag followed by growth to the mature capsid reconciles most of the current experimental evidence and provides a new pathway to elucidate novel therapeutic targets for preventing virion maturation and subsequent infectivity. Moreover, the novel in vitro maturation systems that we established in this study will be useful for many researchers to dissect the mechanisms of retrovirus maturation and to test the effects of maturation inhibitors on this process.
Protein expression and purification
The cDNA encoding gag polyprotein, Pr55Gag, was obtained from the NIH AIDS Research and Reference Reagent Program, Division of AIDS, NIAID, NIH55. To generate Gag (ΔMA15–100Δp6), plasmid Prr400 encoding corresponding Gag regions was subcloned into pET21 (EMD Chemicals Inc., San Diego, CA) using NdeI and XhoI sites. Proteins were expressed in E. coli, Rosetta 2 (DE3), cultured in Luria-Bertani media or modified minimal medium, and induced with 0.5 mM isopropylthiogalactoside at 23 °C for 16 h. All the mutants were constructed from pET21 Prr400 with site-direct mutagenesis.
Cell pellets were collected and resuspended in lysis buffer (25 mM Tris, pH 7.5, 0.5 M NaCl, 1 μM ZnSO4 and 10 mM 2-mercaptoethanol) and broken with a microfludizer. Subsequently, 0.11 × total volume of 10% polyethyleneimine (pH 8.0) was added to precipitate nucleic acids. The lysate was then centrifuged at 35,000g for 30 min, and the pellet discarded. To the supernatant was added ammonium sulfate to 60% saturation, on ice, with stirring for 2 h. The solution was then centrifuged at 10,000g for 30 min. The pellet was resuspended in lysis buffer and dialysed overnight against dialysis buffer (25 mM Tris, pH 7.5, 50 mM NaCl, 1 μM ZnSO4 and 10 mM 2-mercaptoethanol). The supernatant was loaded to ion-exchange chromatography (MonoS 10/100 GL column, GE Healthcare, Piscataway, NJ), using 50 mM–1 M NaCl in 25 mM Tris, pH 7.5, 1 μM ZnSO4 and 10 mM 2-mercaptoethanol. The final purification step for all proteins comprises size-exclusion chromatography (Hi-Load Superdex 200 26/60 column, GE Healthcare) in 25 mM Tris, pH 7.5, 0.15 M NaCl, 1 μM ZnSO4 and 10 mM 2-mercaptoethanol. Proteins were concentrated to 4 mg ml−1 using Amicon concentrators (Millipore, Billerica, MA), flash frozen with liquid nitrogen and stored at −80 °C.
In vitro Gag VLP assembly
Protein at 4 mg ml−1 in storage buffer was mixed with yeast transfer RNA at a nucleic acid/protein ratio of 10% (w w−1), and slowly diluted to 1.5 mg ml−1 by dropwise addition of 50 mM sodium acetate (pH 6.0), 100 μM ZnSO4 and 5 mM dithiothreitol. The mixture was then incubated at 10 °C overnight.
Isolation of PR-deficient immature virions
Immature HIV-1 cores were isolated from particles produced by transfection of 293T cells with the PR-inactive HIV-1 proviral clone R9.PR−56. Supernatants from transfected 293T cells were filtered through a 0.45 μm pore-size filter to remove cellular debris, and particles were pelleted by ultracentrifugation (120,000g for 3 h at 4 °C using Beckman rotor SW32Ti) through a cushion of 20% sucrose in PBS buffer. The viral pellet was resuspended in 250 μl of STE buffer (10 mM Tris-HCl, 100 mM NaCl, 1 mM EDTA, pH 7.4) and incubated on ice for 2 h before ultracentrifugation (120,000g for 16 h at 4 °C) through a 0.5 ml layer of 1% Triton X-100 into a 10 ml linear gradient of 30 to 70% sucrose in STE buffer. Immature cores were recovered from fractions 8 and 9 of the gradient, corresponding to the known density of retroviral cores. Aliquots of the immature core-containing fractions were flash frozen in liquid nitrogen and thawed once for use in PR digestion assays. For cryoEM studies, the immature cores were prepared for use without freezing.
In vitro cleavage of immature virions and Gag VLPs
Frozen aliquots of purified cores from PR-deficient particles were thawed, and 50–100 ng of cores was added to 50 μl reactions containing 100 mM NaOAc, 100 mM NaCl, 1 mM EDTA and 1 mM dithiothreitol at the indicated pH and concentrations of recombinant HIV-1 PR (a kind gift from Dr Celia Schiffer, University of Massachusetts). Reactions were incubated at 37 °C and stopped by the addition of 20 μM of HIV-1 PR inhibitor (Crixivan). A fraction (∼66%) of each reaction was removed, diluted to 200 μl in reaction buffer lacking PR and pelleted by centrifugation (45,000 r.p.m. for 30 min at 4 °C in a Beckman TLA-55 rotor). Pellets were dissolved and subjected to 12% SDS–polyacrylamide gel electrophoresis and immunoblotting with CA-specific mouse monoclonal antibody 183-H12-5C. For cryoEM studies, PR digestion reactions were performed in 200 μl volumes containing 1,500 ng of immature cores. For the cryoEM studies shown in Fig. 2a–c, PR-deficient HIV-1 particles were concentrated by pelleting through a 20% sucrose cushion without detergent exposure, resuspended in STE buffer and used in PR digestion reactions in the presence and absence of Triton X-100. Alternatively, PR-deficient immature HIV-1 particles were treated with 0.02% Triton X-100 in PR digestion reactions.
PR digestion experiments with recombinant VLPs were performed by the addition of various concentrations of PR to the Gag assembly mixture, and incubated at 37 °C for 2 h. For kinetic analysis of Gag cleavage, 3.3 μM of HIV-1 PR was added to the Gag assembly mixture and incubated at 37 °C; at different time points, 25 μl of the digestion reaction mixtures was taken out and put on ice to stop the reaction, and then subjected to SDS–polyacrylamide gel electrophoresis and cryoEM analysis. The cleavage products were separated by NuPAGE Novex 4–12% Bis-Tris gel (Invitrogen) and visualized by Coomassie blue staining.
Incubation with maturation inhibitor
Gag assemblies at different pH values (pH 7.4 and pH 6.0) were incubated with 40 μM BVM (a kind gift of Chin-Ho Chen, Duke University) and 3.3 μM HIV-1 PR at 37 °C for 2 h. Then, 2 μl of the whole sample was mixed with loading buffer, separated by NuPAGE Novex 4–12% Bis-Tris gel (Invitrogen) and visualized by Coomassie blue staining. The same samples were processed for cryoEM analysis.
CryoEM specimen preparation and data collection
Gag assemblies with or without PR cleavage were applied (4 μl) to the carbon side of a glow-discharged perforated Quantifoil grid (Quantifoil Micro Tools, Jena, Germany). The grids were then manually blotted with a filter paper from the backside, to remove the excess fluid and plunge frozen in liquid ethane using a home-made manual gravity plunger. For cryoEM imaging, the frozen grids were loaded into a cryo-holder (Gatan Inc., Pleasanton, CA) and inserted into a Tecnai F20 transmission electron microscope (FEI Inc., Hillsboro, OR) and imaged with a 2 k × 2 k charge-coupled device camera (Gatan). Low dose (10–20 e− Å−2) projection images were collected at a nominal magnification of 50,000 with a pixel size of 4.52 Å and underfocus values of ∼5.0 μm.
3D reconstruction of helical tubes
Well-ordered long straight tubes from Gag cleavage samples were Fourier transformed and indexed for helical symmetry. Two tubes belonging to the same helical family (−14, 11) were included in the final reconstruction. In total, 333 segments of 130 × 130 were boxed out for image processing, and 3D helical refinement and reconstruction were carried out as previously described41. During the refinement, helical symmetry and contrast transfer function correction were applied. The UCSF Chimera package was employed for 3D visualization and isosurface rendering57. The resolution of the final 3D reconstruction was estimated to be 28/22 Å at the 0.5/0.143 thresholds, respectively, from the gold-standard FSC curve.
CryoET and subtomogram averaging of VLPs
Gag VLP assemblies (4 μl) were applied to the carbon side of glow-discharged perforated R2/2 Quantifoil grids and quickly mixed with 1 μl of a 10 nm fiducial gold bead solution before plunge freezing using a manual gravity plunger. Tomography tilt series were collected at a nominal magnification of × 59,000(effective pixel size of 1.9 Å) on a Tecnai G2 Polara electron microscope operated at 300 kV. A series of images were recorded on an FEI Falcon II direct electron detector by tilting the specimen from −45° to 55° in increments of 3° tilt angles. Altogether, 34 images were collected in one tilt series with a dose of ∼30 e− Å−2. Images were recorded at a defocus value of 4–5 μm using FEI batch tomography software.
Eight tilt series were corrected for the phase inversions due to the contrast transfer function using a tile-based approach, and subsequently aligned and reconstructed using weighted back-projection in IMOD58. We selected 28 Gag VLPs for further processing from the resulting tomograms. To extract subtomograms corresponding to the Gag lattice, initial positions respective to a Cartesian grid defined by each tomogram were approximated by using a template matching algorithm implemented in Matlab with a reference derived from the previous published immature structure low-pass filtered to 6 nm (EMD-2706)5. This resolution as well as a coarse angular search was chosen to eliminate any statistical correlation of high-resolution information between half-data sets in later image processing steps. Following template matching and subtomogram extraction, which we limited to the top scoring 300 subtomograms from each VLP, the data were randomly split into two groups of ∼4,200 subtomograms each, which were processed independently for all subsequent steps. Each subtomogram was iteratively aligned to the average from its respective half-set by using standard cross-correlation-based methods. After eliminating the lowest scoring subtomograms, the remaining half-sets had ∼2,000 Gag hexamers each, with the FSC between them reaching 23.2/18.4 Å at the 0.5/0.143 thresholds, respectively.
Computer model building
Computer simulations were performed based on a model that we had previously developed and employed to successfully explain the in vitro formation of conical structures in the absence of membrane and genome, as well as the defective structures observed in the in vivo experiments47. Simulations based on these previous works were designed to test the impact of the genome and the virion membrane on the formation of conical shells and to investigate the different maturation pathways.
The building blocks of both mature and immature shells were modelled as triangular subunits because they can pack to form hexagonal sheets in flat space45,46,47 similar to the Gag and CA molecules. The difference between immature and mature capsids in our model is presented in the mechanical properties of the subunits forming the triangular lattice. It is modelled as an elastic sheet that has an associated bending energy resulting from deforming it away from its preferred curvature, and a stretching energy that comes from distorting the shape of the triangles in the mesh. The bending energy is modelled as simple torsional springs between all neighbouring triangles, , with the sum over all neighbouring triangles <ij>, kb a torsional spring constant. The quantity θij is the angle between the normal vectors and θ0 is the equilibrium angle between the triangles. We can relate θ0 to the spontaneous radius of curvature R0 for the capsid sheet as . The stretching energy corresponds to a network of springs, , with the sum over all subunits i in the mesh, is the length of the ath bond and b0 the equilibrium bond length.
The equilibrium shape of the capsid sheet is found by allowing the mesh to relax to its minimum energy configuration. This is done numerically using a non-linear conjugate gradient method59. The minimum of the total energy of the mesh depends on only two dimensionless constants, the ratio of the linear and torsional spring constants also called the Foppl von Karman number, , and the equilibrium angle between the triangles θ0. The shape of the final shells formed depends on the values of and R0, and previous work has explored the parameter space and mapped out the types of shells formed45,46. The results we are presenting in this paper correspond to one single and R0 where we obtain cylindrical and conical shells rather than spherical or irregular47,60. These two dimensionless parameters define the material properties of the elastic sheet. In the next section, we briefly explain our growth model.
Computer simulations: Nucleation and growth
The assembly of a shell was modelled through the sequential, irreversible addition of a triangular subunit to an incomplete shell (Supplementary Fig. 8). After each assembly step, the shell is relaxed, assuming that the mean time between additions is much larger than the elastic relaxation time. This corresponds to a physical situation in which each new subunit will be added to the optimal position, that is, the number of newly formed bonds is maximized and the elastic energy is minimized. Due to the number of bonds formed after the addition of each subunit, we consider the process is irreversible45,46, once a pentamer or hexamer formed, they can no longer dissociate.
During the growth process, if there is a location with five triangles attached, two exposed edges can either join to create a pentamer or a new triangle can be inserted to form a hexamer (Supplementary Fig. 8a). As the shell grows and gradually starts to roll, the two distance edges of the shell can become close together. If the distance between the edges is very small, they merge to mimic the hydrophobic interaction between the subunits at the edge (Supplementary Movie 1).
The data that support the findings of this study are available from the corresponding author on request.
Accession codes: CryoEM structural data have been deposited at the EMDB under accession code EMD-8403 and EMD-8404 for Gag VLPs before and after protease cleavage, respectively. The data that support the findings of this study are available from the corresponding author on request.
How to cite this article: Ning, J. et al. In vitro protease cleavage and computer simulations reveal the HIV-1 capsid maturation pathway. Nat. Commun. 7, 13689 doi: 10.1038/ncomms13689 (2016).
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Sundquist, W. I. & Krausslich, H. G. HIV-1 assembly, budding, and maturation. Cold Spring Harb. Perspect. Med. 2, a006924 (2012).
Freed, E. O. HIV-1 gag proteins: diverse functions in the virus life cycle. Virology 251, 1–15 (1998).
Ko, L. J., Yu, F. H., Huang, K. J. & Wang, C. T. HIV-1 matrix domain removal ameliorates virus assembly and processing defects incurred by positive nucleocapsid charge elimination. FEBS Open Bio 5, 283–291 (2015).
Bharat, T. A. et al. Structure of the immature retroviral capsid at 8 A resolution by cryo-electron microscopy. Nature 487, 385–389 (2012).
Schur, F. K. et al. Structure of the immature HIV-1 capsid in intact virus particles at 8.8 A resolution. Nature 517, 505–508 (2015).
Pornillos, O. et al. X-ray structures of the hexameric building block of the HIV capsid. Cell 137, 1282–1292 (2009).
Pornillos, O., Ganser-Pornillos, B. K. & Yeager, M. Atomic-level modelling of the HIV capsid. Nature 469, 424–427 (2011).
Zhao, G. et al. Mature HIV-1 capsid structure by cryo-electron microscopy and all-atom molecular dynamics. Nature 497, 643–646 (2013).
Chen, B. & Tycko, R. Simulated self-assembly of the HIV-1 capsid: protein shape and native contacts are sufficient for two-dimensional lattice formation. Biophys. J. 100, 3035–3044 (2011).
Grime, J. M. et al. Coarse-grained simulation reveals key features of HIV-1 capsid self-assembly. Nat. Commun. 7, 11568 (2016).
Grime, J. M. & Voth, G. A. Early stages of the HIV-1 capsid protein lattice formation. Biophys. J. 103, 1774–1783 (2012).
Qiao, X., Jeon, J., Weber, J., Zhu, F. & Chen, B. Mechanism of polymorphism and curvature of HIV capsid assemblies probed by 3D simulations with a novel coarse grain model. Biochim. Biophys. Acta 1850, 2353–2367 (2015).
Erdemci-Tandogan, G., Wagner, J., van der Schoot, P. & Zandi, R. Role of Genome in the Formation of Conical Retroviral Shells. J. Phys. Chem. B 120, 6298–6305 (2016).
Nguyen, T. T., Bruinsma, R. F. & Gelbart, W. M. Elasticity theory and shape transitions of viral shells. Phys. Rev. E 72, 051923 (2005).
Wiegers, K. et al. Sequential steps in human immunodeficiency virus particle maturation revealed by alterations of individual Gag polyprotein cleavage sites. J. Virol. 72, 2846–2854 (1998).
Lee, S. K., Harris, J. & Swanstrom, R. A strongly transdominant mutation in the human immunodeficiency virus type 1 gag gene defines an Achilles heel in the virus life cycle. J. Virol. 83, 8536–8543 (2009).
Tritch, R. J., Cheng, Y. E., Yin, F. H. & Erickson-Viitanen, S. Mutagenesis of protease cleavage sites in the human immunodeficiency virus type 1 gag polyprotein. J. Virol. 65, 922–930 (1991).
Pettit, S. C. et al. The p2 domain of human immunodeficiency virus type 1 Gag regulates sequential proteolytic processing and is required to produce fully infectious virions. J. Virol. 68, 8017–8027 (1994).
Adamson, C. S., Sakalian, M., Salzwedel, K. & Freed, E. O. Polymorphisms in Gag spacer peptide 1 confer varying levels of resistance to the HIV- 1 maturation inhibitor bevirimat. Retrovirology 7, 36 (2010).
Adamson, C. S., Waki, K., Ablan, S. D., Salzwedel, K. & Freed, E. O. Impact of human immunodeficiency virus type 1 resistance to protease inhibitors on evolution of resistance to the maturation inhibitor bevirimat (PA-457). J. Virol. 83, 4884–4894 (2009).
Keller, P. W., Adamson, C. S., Heymann, J. B., Freed, E. O. & Steven, A. C. HIV-1 maturation inhibitor bevirimat stabilizes the immature Gag lattice. J. Virol. 85, 1420–1428 (2011).
Waki, K. et al. Structural and functional insights into the HIV-1 maturation inhibitor binding pocket. PLoS Pathog. 8, e1002997 (2012).
Bayro, M. J., Ganser-Pornillos, B. K., Zadrozny, K. K., Yeager, M. & Tycko, R. Helical conformation in the CA-SP1 junction of the immature HIV-1 lattice determined from solid-state NMR of virus-like particles. J. Am. Chem. Soc. 138, 12029–12032 (2016).
Datta, S. A. et al. Dimerization of the SP1 Region of HIV-1 Gag induces a helical conformation and association into helical bundles: implications for particle assembly. J. Virol. 90, 1773–1787 (2016).
Schur, F. K. et al. An atomic model of HIV-1 capsid-SP1 reveals structures regulating assembly and maturation. Science 353, 506–508 (2016).
Wagner, J. M. et al. Crystal structure of an HIV assembly and maturation switch. Elife 5, e17063 (2016).
de Marco, A. et al. Structural analysis of HIV-1 maturation using cryo-electron tomography. PLoS Pathog. 6, e1001215 (2010).
Briggs, J. A. et al. Structure and assembly of immature HIV. Proc. Natl Acad. Sci. USA 106, 11090–11095 (2009).
Wright, E. R. et al. Electron cryotomography of immature HIV-1 virions reveals the structure of the CA and SP1 Gag shells. EMBO J. 26, 2218–2226 (2007).
Frank, G. A. et al. Maturation of the HIV-1 core by a non-diffusional phase transition. Nat. Commun. 6, 5854 (2015).
Keller, P. W. et al. A two-pronged structural analysis of retroviral maturation indicates that core formation proceeds by a disassembly-reassembly pathway rather than a displacive transition. J. Virol. 87, 13655–13664 (2013).
Meng, X. et al. Protease cleavage leads to formation of mature trimer interface in HIV-1 capsid. PLoS Pathog. 8, e1002886 (2012).
Woodward, C. L., Cheng, S. N. & Jensen, G. J. Electron cryotomography studies of maturing HIV-1 particles reveal the assembly pathway of the viral core. J. Virol. 89, 1267–1277 (2015).
Benjamin, J., Ganser-Pornillos, B. K., Tivol, W. F., Sundquist, W. I. & Jensen, G. J. Three-dimensional structure of HIV-1 virus-like particles by electron cryotomography. J. Mol. Biol. 346, 577–588 (2005).
Briggs, J. A. & Krausslich, H. G. The molecular architecture of HIV. J. Mol. Biol. 410, 491–500 (2011).
Zhou, J., Huang, L., Hachey, D. L., Chen, C. H. & Aiken, C. Inhibition of HIV-1 maturation via drug association with the viral Gag protein in immature HIV-1 particles. J. Biol. Chem. 280, 42149–42155 (2005).
Li, F. et al. PA-457: a potent HIV inhibitor that disrupts core condensation by targeting a late step in Gag processing. Proc. Natl Acad. Sci. USA 100, 13555–13560 (2003).
Zhou, J. et al. Small-molecule inhibition of human immunodeficiency virus type 1 replication by specific targeting of the final step of virion maturation. J. Virol. 78, 922–929 (2004).
Forshey, B. M., von Schwedler, U., Sundquist, W. I. & Aiken, C. Formation of a human immunodeficiency virus type 1 core of optimal stability is crucial for viral replication. J. Virol. 76, 5667–5677 (2002).
Cassidy, C. K. et al. CryoEM and computer simulations reveal a novel kinase conformational switch in bacterial chemotaxis signaling. Elife 4, e08419 (2015).
Meng, X., Zhao, G. & Zhang, P. Structure of HIV-1 capsid assemblies by cryo-electron microscopy and iterative helical real-space reconstruction. J. Vis. Exp. 54, e3041 (2011).
Ganser-Pornillos, B. K., von Schwedler, U. K., Stray, K. M., Aiken, C. & Sundquist, W. I. Assembly properties of the human immunodeficiency virus type 1 CA protein. J Virol. 78, 2545–2552 (2004).
Krausslich, H. G. et al. Activity of purified biosynthetic proteinase of human immunodeficiency virus on natural substrates and synthetic peptides. Proc. Natl Acad. Sci. USA 86, 807–811 (1989).
Hagan, M. F. & Zandi, R. Recent advances in coarse-grained modeling of virus assembly. Curr. Opin. Virol. 18, 36–43 (2016).
Levandovsky, A. & Zandi, R. Nonequilibirum assembly, retroviruses, and conical structures. Phys. Rev. Lett 102, 198102 (2009).
Wagner, J. & Zandi, R. The robust assembly of small symmetric nanoshells. Biophys. J. 109, 956–965 (2015).
Yu, Z. et al. Unclosed HIV-1 capsids suggest a curled sheet model of assembly. J. Mol. Biol. 425, 112–123 (2013).
Li, S., Hill, C. P., Sundquist, W. I. & Finch, J. T. Image reconstructions of helical assemblies of the HIV-1 CA protein. Nature 407, 409–413 (2000).
Morton, V. L. et al. The impact of viral RNA on assembly pathway selection. J. Mol. Biol. 401, 298–308 (2010).
Mattei, S. et al. RNA and nucleocapsid are dispensable for mature HIV-1 capsid assembly. J. Virol. 89, 9739–9747 (2015).
Fontana, J. et al. Distribution and redistribution of HIV-1 nucleocapsid protein in immature, mature, and integrase-inhibited virions: a role for integrase in maturation. J. Virol. 89, 9765–9780 (2015).
Jurado, K. A. et al. Allosteric integrase inhibitor potency is determined through the inhibition of HIV-1 particle maturation. Proc. Natl Acad. Sci. USA 110, 8690–8695 (2013).
Checkley, M. A., Luttge, B. G., Soheilian, F., Nagashima, K. & Freed, E. O. The capsid-spacer peptide 1 Gag processing intermediate is a dominant-negative inhibitor of HIV-1 maturation. Virology 400, 137–144 (2010).
Muller, B., Anders, M. & Reinstein, J. In vitro analysis of human immunodeficiency virus particle dissociation: gag proteolytic processing influences dissociation kinetics. PLoS One 9, e99504 (2014).
Erickson-Viitanen, S. et al. Cleavage of HIV-1 gag polyprotein synthesized in vitro: sequential cleavage by the viral protease. AIDS Res. Hum. Retroviruses 5, 577–591 (1989).
Wyma, D. J., Kotov, A. & Aiken, C. Evidence for a stable interaction of gp41 with Pr55(Gag) in immature human immunodeficiency virus type 1 particles. J. Virol. 74, 9381–9387 (2000).
Pettersen, E. F. et al. UCSF chimera—a visualization system for exploratory research and analysis. J. Comput. Chem. 25, 1605–1612 (2004).
Kremer, J. R., Mastronarde, D. N. & McIntosh, J. R. Computer visualization of three-dimensional image data using IMOD. J. Struct. Biol. 116, 71–76 (1996).
Press, W. H., Teukolsky, S. A., Vetterling, W. H. & Flannery, B. P. Numerical Recipes in C (2nd Ed.): The Art of Scientific Computing. (Cambridge University Press, 1992).
Ganser, B. K., Li, S., Klishko, V. Y., Finch, J. T. & Sundquist, W. I. Assembly and analysis of conical models for the HIV-1 core. Science 283, 80–83 (1999).
We thank Dr Celia Schiffer, University of Massachusetts, for the purified recombinant HIV-1 PR protein, Dr Jing Zhou, Vanderbilt University, for virus preps and Chin-Ho Chen, Duke University, for BVM. We thank Dr Xiaofeng Fu, University of Pittsburgh, for help with cryoEM imaging and Dr Teresa Brosenitsch for critical reading of the manuscript. Monoclonal antibody 193-H12-5C was obtained from Dr Bruce Chesebro via the NIH AIDS Research and Reference Reagent Program. This work was supported by the National Institutes of Health NIGMS Grant P50GM082251, the Office of the Director Grant S10OD019995, the Childhood Infections Research Program (NIH T32 AI095202) and by the National Science Foundation through Grant No. DMR-1310687.
The authors declare no competing financial interests.
Supplementary Figures and Supplementary Table (PDF 1679 kb)
The role of membrane on the capsid formation. The membrane imposes local stress on the growing sheet that breaks the shell symmetry and thus facilitates the formation of pentamers, resulting into the assembly of conical capsids. (MOV 6026 kb)
The role of genome on the formation of conical capsids. The genome breaks the symmetry and a conical capsid forms. To keep the genome inside the shell, we keep it attached to a few subunits during the growth process. In the absence of genome, for this set of parameters, the capsid grows as a cylinder, see movie 3. (MOV 6993 kb)
A cylindrical shell forms if the genome is not attached to the growing shell during the initial stages of the assembly process. (MOV 4211 kb)
The genome-subunits complex remains attached to the membrane at the beginning of the growth process and then is released after about one-sixth of the shell forms. The sheet grows asymmetrically along one side of the capsid until it meets the membrane and then it grows back to close the shell. (MOV 2310 kb)
Formation of a conical capsid through a combination of displacive and disassembly/reassembly models. An immature lattice of 600 subunits undergoes maturation initially and then assembles to a cone with the addition of free subunits to the growing edge of the shell. (MOV 4187 kb)
Formation of a conical capsid through a combination of displacive and disassembly/reassembly models. An immature lattice of 400 subunits undergoes maturation initially and grows as a cone with the addition of free subunits to the growing capsid. (MOV 4561 kb)
No closed mature defect-free core forms when employing only the non-diffusional model. (MOV 1041 kb)
About this article
Cite this article
Ning, J., Erdemci-Tandogan, G., Yufenyuy, E. et al. In vitro protease cleavage and computer simulations reveal the HIV-1 capsid maturation pathway. Nat Commun 7, 13689 (2016). https://doi.org/10.1038/ncomms13689
Communications Biology (2021)
Virologica Sinica (2019)
Nature Methods (2018)
Journal of Biological Physics (2018)