Platinum-based catalysts have been considered the most effective electrocatalysts for the hydrogen evolution reaction in water splitting. However, platinum utilization in these electrocatalysts is extremely low, as the active sites are only located on the surface of the catalyst particles. Downsizing catalyst nanoparticles to single atoms is highly desirable to maximize their efficiency by utilizing nearly all platinum atoms. Here we report on a practical synthesis method to produce isolated single platinum atoms and clusters using the atomic layer deposition technique. The single platinum atom catalysts are investigated for the hydrogen evolution reaction, where they exhibit significantly enhanced catalytic activity (up to 37 times) and high stability in comparison with the state-of-the-art commercial platinum/carbon catalysts. The X-ray absorption fine structure and density functional theory analyses indicate that the partially unoccupied density of states of the platinum atoms’ 5d orbitals on the nitrogen-doped graphene are responsible for the excellent performance.
Securing renewable and reliable sources of clean energy is one of the world’s foremost challenges. Addressing this challenge is not only critical for the global economy but will also aid in the mitigation of environmental and health hazards caused by fossil fuels1. Hydrogen is the cleanest fuel available and is believed to be one of the most promising energy sources of the twenty-first century2,3. However, the majority of the hydrogen produced today is derived from steam-reformed methane, which is sourced from fossil reserves and produces a substantial amount of CO2 (ref. 4). The production of hydrogen from water electrolysis is a promising alternative to the current CO2-emitting fossil fuel-based energy systems5,6.
Platinum (Pt)-based catalysts are generally considered to be the most effective electrocatalysts for the hydrogen evolution reaction (HER)5,7. Unfortunately, Pt is expensive and scarce, limiting the commercial potential for such catalysts. The development of active, stable and inexpensive electrocatalysts for water splitting is a key step in the realization of a hydrogen economy, which is based on the use of molecular hydrogen for energy storage. Significant effort has been devoted to the search of non-precious-metal-based HER catalysts, including sulfide-based materials8,9,10,11, and C3N4 (refs 12, 13, 14). Although these candidate materials show promising activities for the HER, the activities of these catalysts in their present form are insufficient for industrial applications15.
To overcome the challenges associated with the Pt HER catalysts and to drive the cost of H2 production from water electrolysis down, it is very important to markedly decrease the Pt loading and increase the Pt utilization efficiency. Currently, supported Pt nanoparticles (NPs) are typically used to promote Pt activity towards the HER. Unfortunately, the geometry of the NPs limit the majority of the Pt atoms to the particle core, deeming them ineffective, as only surface atoms are involved in the electrochemical reaction16. Reducing the size of the Pt NPs to clusters or even single atoms could significantly decrease the noble metal usage and increase their catalytic activity, which is highly desirable to enhance the Pt utilization and decrease the cost of the electrocatalysts17. It has been shown that single Pt atoms dispersed on an FeOx surface have a higher catalytic activity for CO oxidation compared with the corresponding Pt NPs18. Moreover, the single-atom catalysts also exhibited a significantly improved catalytic activity towards methanol oxidation, up to 10 times greater than the state-of-the-art commercial carbon-supported Pt (Pt/C) catalysts19.
Controlled and large-scale synthesis of stable single atoms and clusters remains a considerable challenge due to the natural tendency for metal atoms to diffuse and agglomerate, resulting in the formation of larger particles20,21. In practical applications, it is required that the single atoms not only have a high activity but also exhibit a satisfactory stability17,22,23. Moreover, it is also desired to produce a high density of single atoms to meet the practical applications. Consequently, an ideal single-atom catalyst must have a high activity, a high stability and a high density. Thus, we need to discover an effective means to synthesize this ideal single-atom catalyst. In this paper, the atomic layer deposition (ALD) technique was utilized, as it has been proven to be a powerful tool for large-scale synthesis of stable single-atom and cluster catalysts19,24. ALD has the ability to precisely control the size and distribution of particles on a substrate by using sequential and self-limiting surface reactions25,26,27.
In this work, we fabricate single platinum atoms and clusters supported on nitrogen-doped graphene nanosheets (NGNs) for the HER using the ALD technique, resulting in the utilization of nearly all the Pt atoms. The size and density of the Pt catalysts on the NGNs are precisely controlled by simply adjusting the number of ALD cycles. The Pt atoms and clusters on the NGNs show much greater activity for the HER in comparison with conventional Pt NP catalysts.
Electron microscopy characterization
The morphology of the ALD Pt on NGNs with 50 and 100 cycles (denoted hereafter as ALD50Pt/NGNs and ALD100Pt/NGNs, respectively) were characterized by annular dark field (ADF) imaging with aberration-corrected scanning transmission electron microscopy (STEM). The high spatial resolution allowed for the precise determination of the size and distribution of the individual metal atoms, thus providing local structural information about the metal species on the NGN supports24,28,29. It can be clearly observed in Fig. 1a,b that the numerous individual Pt atoms (bright spots), as well as very small Pt clusters are uniformly dispersed on the NGNs’ surface for the ALD50Pt/NGNs catalysts. Through examination of multiple NGNs, small NPs were also detected on this sample (Supplementary Fig. 1a). After 100 ALD cycles many single Pt atoms and small clusters were still present, yet it appears as though some Pt clusters have grown to form NPs at a larger quantity than observed for the 50 ALD cycles (Fig. 1c,d and Supplementary Fig. 1b). These findings suggest that ALD is a suitable technique for preparing single atoms/clusters on nitrogen-doped graphene supports. As shown in Fig. 1e, during the ALD process, the Pt precursor (MeCpPtMe3) first reacts with the NGNs as influenced by the N-dopant. The chemical bonding between the Pt precursor and NGNs ensures a strong interaction between the deposited material and the support30. The Pt loading after ALD was confirmed using inductively coupled plasma-atomic emission spectroscopy, in which a loading of 2.1 and 7.6 wt% was obtained for the 50 and 100 ALD cycled samples, respectively.
Catalytic performance and stability
The HER activity of the ALDPt/NGNs with 50 and 100 cycles were measured in comparison with commercial Pt/C catalysts by conducting linear sweep voltammetry measurements in 0.5 M H2SO4 at room temperature. The NGNs without Pt catalysts exhibited a poor HER activity (Fig. 2a), which is consistent with previous studies12. As shown in Fig. 2a, both ALDPt/NGN and Pt/C catalysts exhibited excellent catalytic activities towards the HER, with negligible overpotentials. Importantly, the ALDPt/NGN catalysts exhibited much higher HER activities than that of the commercial Pt/C catalysts (Fig. 2a). It was observed that the HER catalytic activity of the ALDPt/NGNs decreased with an increased number of ALD cycles. This is likely attributed to the increased formation of clusters or NPs in the sample with 100 ALD cycles. Supplementary Fig. 2 showed consistent results with previous studies, as the Pt/C catalyst achieved a Tafel slope of 31 mV dec−1 (ref. 31). Following the same measurement parameters, a smaller Tafel slope than the Pt/C catalysts was achieved for the ALDPt/NGNs catalysts at 29 mV dec−1. The specific activity for each catalyst was calculated from the polarization curves by normalizing the current with the geometric area of the electrode. As shown in Supplementary Fig. 3, the HER activities for the ALD50Pt/NGNs, ALD100Pt/NGNs and Pt/C catalysts are 16, 12.9 and 8.2 mA cm−2, respectively, at the overpotential of 0.05 V. Furthermore, normalized to the Pt loading (Fig. 2b), the mass activity of the HER for the ALD50Pt/NGNs catalysts at the overpotential of 0.05 V was 10.1 A mg−1. Remarkably, the mass activity of the ALD50Pt/NGNs catalyst was 7.8 times greater than the ALD100Pt/NGNs catalyst (2.12 A mg−1) and 37.4 times greater than the Pt/C catalyst (0.27 A mg−1). These findings suggest that the single Pt atoms and clusters can significantly increase the Pt utilization activity in comparison to their NP counterparts18,32, with the additional benefit of decreasing the cost of the catalyst for the HER.
The long-term stability of the ALDPt/NGNs and Pt/C catalysts were examined by extended electrolysis at fixed potentials. Supplementary Fig. 4 shows that the ALDPt/NGNs catalysts appear stable at 0.04 V versus reversible hydrogen electrode (RHE), while the current density of the Pt/C catalysts degraded with time at the same operating conditions. The lower stability of the Pt/C catalysts may be due to a weak interaction between the supported Pt particles and the C substrate33, resulting in the detachment and/or agglomeration of the Pt NPs. Accelerated degradation tests (ADTs) were also adopted to evaluate the durability of the Pt atom/cluster catalysts for the HER activity. As exhibited in Fig. 2c, the ALD50Pt/NGNs catalysts’ polarization curve after 1,000 cycles retained a similar performance to the initial test, resulting in a loss of only 4% of its initial current density at an overpotential of 0.05 V (Supplementary Fig. 5). The significant stability of the ALD50Pt/NGNs catalysts can be observed when comparing its performance with the ALD100Pt/NGNs catalysts (∼10% loss) and the Pt/C catalysts (19% loss) under the same measurement conditions (Supplementary Figs 5 and 6).
STEM images acquired from the ALDPt/NGNs after the ADTs (Fig. 2d and Supplementary Fig. 7) showed that there was only a slight increase in the Pt size with no obvious aggregation. This further supports the excellent stability observed in the activity from the ALDPt/NGNs catalysts during the ADTs for the HER. In contrast, according to high-resolution transmission electron microscope images, the Pt/C catalysts (Supplementary Fig. 8) coalesced into larger particles (marked with white circles in Supplementary Fig. 8b) with the average size of Pt NPs increasing from 4.2 to 5.5 nm after the ADT. The growth of the NPs may be caused by Pt migration due to weak interactions between the catalyst and the support34,35. As shown in Supplementary Fig. 9, the negative potentials of a HER cathode are generally not conducive for electro-oxidation of the support material. In addition, Pt is one of the most stable electrocatalyst materials36,37, and Pt oxidation/dissolution is typically not observed at potentials <0.85 V versus RHE in acidic conditions, thus the Pt and the C supports are stable under HER conditions. This suggests that the higher stability of the Pt atoms/clusters observed on the ALDPt/NGNs samples could be ascribed to the stronger interactions between the Pt and the NGNs supports compared to the Pt/C catalysts.
X-ray absorption spectroscopy studies
X-ray absorption spectroscopy was used to study the local electronic structure of the Pt catalysts and their interaction with the support material38,39. The normalized X-ray absorption near edge structure (XANES) spectra for both the Pt L3- and L2-edges of the ALDPt/NGNs and Pt/C catalysts are shown in Fig. 3 with comparison to a standard Pt foil. It can be seen in Fig. 3 that the threshold energy (E0) and the maximum energy (Epeak) of the Pt L3-edge for the ALDPt/NGNs are similar to those of the corresponding metal foil, thus confirming the metallic nature of the Pt atoms and clusters on the ALDPt/NGNs samples. Furthermore, detailed examination of the spectra was conducted by qualitative and quantitative analysis of the Pt L2 and L3 white line (WL) edges. It has been shown that the area under the WL of the L2,3-edge of the Pt metal is directly related to the unoccupied density of states of the Pt 5d orbitals. This in turn has been used to correlate the catalytic activity of Pt-based electrocatalysts to changes in their local electronic structure. Close examination reveals that the intensity of the Pt L3 WL exhibits small differences for the ALDPt/NGNs and the Pt/C catalysts. The magnitude of the Pt WL intensity at the Pt L3-edge appears to increase in the order of Pt foil<Pt/C<ALD100Pt/NGNs<ALD50Pt/NGNs (Fig. 3a). In contrast, the corresponding L2-edge WL exhibits considerably more variation among the samples and a higher sensitivity compared with that of the Pt L3-edge, resulting in a different trend for the ALDPt/NGNs and the Pt/C materials. The order of increasing intensity of the WL in the Pt L2-edge is as follows: Pt foil<ALD100Pt/NGNs≤Pt/C<ALD50Pt/NGNs (Fig. 3b). This observation clearly confirms that for 5d noble metal states, the 5d5/2 and 5d3/2, demonstrate subtle but different chemical sensitivity due to the large spin–orbit coupling of the Pt 5d orbitals, and that both the L3- and L2-edge WLs should be used together to address the chemistry of the material19.
To fully understand the effect of the unoccupied densities of 5d states of the Pt catalysts, quantitative WL intensity analysis has been conducted on the basis of a reported method to determine the occupancy of the 5d states in each sample38,40,41 (see details in Methods). The Pt L3- and Pt L2-edge threshold and WL parameters were summarized in Table 1. The results indicate that the ALD50Pt/NGNs catalysts have the highest total unoccupied density of states of Pt 5d character, while the Pt/C sample has the lowest. It has been demonstrated in literature that the vacant d-orbitals of individual atoms play a vital role in the activity of catalysts and account for the excellent catalytic activity of single-atom catalysts18,42.
Furthermore, to study the local atomic structure of Pt using X-ray absorption spectra (XAS), the extended X-ray absorption fine structure (EXAFS) region of the X-ray absorption spectra was studied. The Fourier transforms of the EXAFS region plotted in Supplementary Fig. 10 shows several main peaks. The peak at 2.6 Å is associated with the Pt–Pt peak, which is significant in the Pt foil spectra. This peak shifts towards lower values in the Pt/C samples (2.5 Å), and is significantly dampened and shifted to higher values (2.7 Å) in the ALD-deposited samples. This is consistent with previously reported data on ALD-deposited Pt nanostructures19. However, as expected, due to the higher Pt content of the ALD100Pt/NGNs sample, the intensity of the Pt–Pt peak in comparison with the ALD50Pt/NGNs sample is stronger, which confirms the presence of larger clusters and the higher loading observed in the ALD100Pt/NGNs samples by ADF imaging and inductively coupled plasma-atomic emission spectroscopy results. The peaks observed around 1.7 Å in the ALD-deposited samples can be related to Pt–O or Pt–C bonds, but individual bond lengths are not distinguishable due to a similar backscattering phase. The significant intensity of Pt–O or Pt–C bonds and considerable deviation of the Pt–Pt bond of the ALD samples compared with the Pt foil indicates the presence of single Pt atoms in these samples.
It has been demonstrated that a strong interaction between the deposited metal and the support material plays a vital role in the stabilization of supported catalysts43. Despite the controlled deposition process during ALD, atomic diffusion and agglomeration are still possible and probable, if a weak interaction exists between the atoms and the support, thus resulting in the formation of large particles. This suggests the importance of the support selection when striving to prepare stable atom catalysts. It has been reported in the literature that doping the graphene lattice with N can enhance the Pt–C support interaction energy, resulting in highly stable Pt catalysts44,45,46. This enhanced binding energy from the incorporation of N-dopants in the graphene lattice has been attributed to creating preferred nucleation sites for metals and metal oxides47. In addition, it was determined in one of our previous experiments that the Pt atoms and clusters favour deposition at edge locations on NGNs, thus stabilizing the creation of Pt atoms and clusters without the formation of NPs24. To further examine the effects of the N-dopants on the stability of the Pt atoms and clusters observed in Fig. 1 and to expand on the understanding of the N-dopant’s contribution to the HER, we have prepared ALD-deposited Pt on graphene nanosheets (GNs) for comparison. Supplementary Fig. 11 exhibits low- and high-magnification ADF images of ALD50Pt/GNs, in which there is a wide distribution of Pt sizes from atoms and clusters to larger NPs. It can be suggested that the formation of larger particles on the GNs during the ALD procedure can be attributed to the weaker interaction between the Pt and the graphene support in contrast to the N-doped graphene support. Furthermore, the HER activity was evaluated for the ALD50Pt/GNs sample using linear sweep voltammetry with a scan rate of 2 mV s−1 in 0.5 M H2SO4, which revealed a lower mass and specific activity in comparison with the ALD50Pt/NGNs sample (Supplementary Fig. 12). The stability of the Pt catalysts on the GNs was also confirmed using ADT tests. It was determined that the ALD50Pt/GNs sample lost 24% of its initial HER activity (Supplementary Fig. 13), while as previously reported, the ALD50Pt/NGNs only decreased its activity by 4%. Following the ADT test, the ALD50Pt/GNs sample was examined using ADF imaging, where an increased frequency of larger clusters and NPs was observed (Supplementary Figs 11 and 13). This suggests that the increased Pt particle size on the ALD50Pt/GNs sample from the ADT tests is responsible for the reduced HER activity after cycling. It can be suggested that the increased Pt particle size with cycling on the GNs is likely originating from a weaker adsorption energy, thus leading to a decreased stability of the Pt atoms, clusters and NPs, allowing them to become susceptible to degradation mechanisms48. Ultimately, this supports the argument that the strength of the interaction between the Pt catalysts and support increases on NGNs in comparison with GNs, which accounts for the increased stability and activity after ADT cycling.
To understand the stabilization mechanism of Pt atoms on N-doped graphene, we applied density functional theory (DFT) calculations. The DFT calculations have been carried out using a graphene (5 × 5 × 1) supercell containing 48 C atoms and 1 N atom to identify the distribution of single Pt atoms on the NGNs. All inequivalent Pt-adsorption configurations around the N atom have been considered, and the most stable configurations are shown in Supplementary Fig. 14. It can be seen that in site III, Pt is located closest to the N atom, while in site I, II, IX, X and XI the Pt atom is situated further away from the N-dopant. To determine the most stable adsorption site for the Pt atom, the adsorption energies (Ea) for each site in Supplementary Fig. 14 were calculated by the following equation:
where EPt is the energy of an isolated Pt atom, ENGNs is the total energy of the N-doped graphene and ENGNs+nPt is the total energy of the N-doped graphene with n adsorbed Pt atoms, respectively. A positive Ea indicates the successful adsorption of the Pt atoms during the N-doped graphene.
As shown in Supplementary Table 1, the Pt atom prefers to directly bond to the N-dopant, as demonstrated by the significantly larger calculated adsorption energy of 5.171 eV for a Pt atom in site III in comparison with the other adsorption sites. Moreover, the calculated Bader charge shows that 0.257 e is transferred from the Pt to the N atom in the N-doped graphene substrate when the system is in its most stable configuration (site III), confirming the relatively large Pt adsorption energy at this site. These results clearly suggest that the Pt prefers to adsorb to the N-dopant sites on Pt deposition.
To further examine the distribution of the Pt atoms on the N-doped graphene and their propensity to agglomerate, the energy difference between an isolated Pt atom and a Pt cluster configuration, ΔEd, was calculated, in which the total energy of the isolated configuration was used as a reference energy. In this scheme, a relatively large positive value for ΔEd indicates that Pt atoms energetically favour the single-atom form and will tend to avoid clustering. For comparison of substrates, the production of various Pt cluster configurations on pristine graphene was also examined. As shown in Supplementary Fig. 15 and Supplementary Table 2, it is more favourable for the Pt atoms to be isolated (ΔEd=+1.145 eV) on the N-doped graphene, while the Pt atoms prefer to cluster on the pristine graphene (ΔEd=−1.357 eV). This fully supports the experimental observations of the increased size of the Pt clusters and NPs on the graphene substrate in comparison with the N-doped graphene.
A Bader charge analysis (Supplementary Table 2) has also been performed on the adsorption models for the pristine and N-doped graphene to understand the formation of bonds through charge transfer. A charge transfer (about 0.25 e) from the Pt atom to the support occurs on the N-doped graphene for the single Pt atom case, while almost no charge transfer exists between the Pt atom and the pristine graphene. When two Pt atoms form a dimer on the N-doped graphene, one Pt atom (Pt1) interacts with the graphene support, whilst the other (Pt2) atom sits above and bonds directly to Pt1. Meanwhile, Pt1 loses 0.521 e to Pt2, and Pt2 gains 0.389 e due to the strong bonding between Pt1–Pt2. In this cluster configuration, the surrounding N and C atoms acquire the remaining 0.132 e, which is less than the single-atom case. This suggests that the two Pt atoms result in an increased electron transfer to the substrate when they exist in isolation as compared with forming a dimer; therefore, the stabilization of single atoms is favoured. On the other hand, the Pt dimer adsorbed on the pristine graphene leads to an electron transfer of 0.193 e from Pt1 (0.087 e) and the graphene support to Pt2, whereas very little electron transfer occurs during the formation of the single isolated atoms on the pristine graphene. Thus, the dimer results in a system of increased stability. It can be concluded from the Bader charge and the ΔEd that isolated atoms are the preferred form of Pt adsorption on the N-doped graphene support, while pristine graphene will favour the formation of Pt clusters.
The chemical bonding of Pt with the N-doped graphene has also led to unique electronic properties of single Pt atoms with respect to Pt NPs, due to the charge transfer required for bond formation. The single metal atoms still carry a charge after adsorption onto the N-doped graphene substrate, which can be verified by various spectral measurements and computational modelling of the catalysts18,49,50,51. In our study, it was found that the discrete 5d-orbitals of the single Pt atoms are mixed with the N-2p orbitals around the Fermi level (Fig. 4). The calculated Bader charges (Table 2) show that the single Pt atoms are positively charged, where the N atom obtains the electron. In this case, the single Pt atoms on the N-doped graphene contain more unoccupied 5d densities of states. On H chemisorption (Fig. 4b), the 5d orbitals of the Pt atoms interact strongly with the 1s orbital of the H atoms, leading to electron pairing and hydride formation. In addition, more Pt (5d) states are found above the Fermi level, which is consistent with the calculated charge transfer from the Pt atoms to the H atoms. To fully understand the unique electronic properties of the single Pt atom catalysts for the HER, Pt clusters were also examined. As shown in Supplementary Fig. 16, the electronic properties for H adsorption on Pt clusters was investigated using a typical cluster of Pt44 (ref. 52). On the basis of the partial density of states and Bader charge analysis of both H adsorption on Pt44 and on the single Pt atoms/NGNs system (Table 2, Fig. 4 and Supplementary Fig. 16) it was found that the electron transfer from each surface Pt atom of Pt44 to H is <0.1 e, which is less than that of the single Pt atoms (+0.421 e). This suggests that upon H adsorption, each Pt atom of the Pt44 cluster remains metallic, while the single Pt atoms on the NGNs become nonmetallic through the donation of electrons to both the substrate and H atoms. This leads to the unique electronic structure of the single Pt atoms on the NGNs and is expected to be the primary reason of the increased HER activity of the ALD50Pt/NGNs sample.
Our XANES data have experimentally shown that the ALD Pt atoms do in fact have a higher total unoccupied density of 5d states, which agrees with the partial density of states calculation. Previous research has suggested that a change in the electronic properties of catalysts will affect the catalytic performance52. Thus, we carried out a series of DFT calculations to obtain a fundamental understanding of the unexpectedly high electrocatalytic activity of the single-atom catalysts. For the HER in acidic media, the overall HER pathway (H++e−→1/2H2) can be divided into two separate pathways comprising either the Volmer–Heyrovsky or the Volmer–Tafel mechanism53,54. The first step of both pathways involves the bonding of the hydrogen ion to the catalyst, H++e−→H* (Volmer reaction), where H* indicates an available surface site on the catalyst for hydrogen adsorption. In the next stage, the molecular hydrogen can be released through the Heyrovsky (H++e−+H*→H2↑) or the Tafel (H*→1/2H2↑) reaction. Many previous studies55,56,57 have shown that the Tafel mechanism in the electrocatalytic HER is preferred at high H coverage conditions on both Pt surfaces and Pt NPs. To verify the proposed HER mechanism, we performed a computational study on the single Pt atom catalysts to gain detailed insights into the HER process. The average Pt–H distance for the H chemisorption configuration was found to be 1.623 Å, which was similar with the cases of H adsorbed on Pt surfaces and nanoclusters58,59. It was also determined that the adsorption strengths of both H and H2 decreased with an increase in the number of adsorbed H atoms, eventually leading to a minimum value when four H atoms were adsorbed, as shown in the Supplementary Fig. 17. In the presence of a single H atom, the most optimal orbital interaction with the Pt catalyst results in the bond formation with the most favourable Pt orbital, dz2, with a corresponding adsorption energy of 0.8 eV. As the number of interacting H atoms is increased, their bond formation with Pt is affected by the electrostatic repulsion between the H atoms. The Pt to H interaction now depends on the number of interacting H atoms, and the distinct orbitals for bond formation becomes a compromise between the H–H electrostatic repulsion and the orbital interaction of Pt–H. Specifically in the case of two H atoms, the interacting orbitals between the H atoms and the Pt catalyst become the dyz and (Supplementary Fig. 18a), resulting in a corresponding adsorption energy of 0.735 eV per H. Furthermore, when three H atoms adsorb onto a single Pt atom, two of the H atoms automatically form an H2 dimer, due to the fact that the initial two H atoms have occupied the two empty 5d orbitals of the Pt catalyst. The resulting corresponding adsorption energy for three H atoms is 0.514 eV per H. Finally, as the number of H atoms reaches four (Supplementary Fig. 18c), the interaction between the Pt and H atoms are through the dyz and orbitals, which can effectively avoid the repulsion between the H atoms. The corresponding adsorption configuration is one in which an H2 dimer and two isolated H atoms are formed with an adsorption energy of 0.458 eV per H. The maximum number of adsorbed H atoms in this situation is four, as Pt no longer has empty 5d orbitals or physical space to allow for the interaction with an additional H atom.
We further calculated the reaction pathways and activation barriers based on the number of adsorbed H atoms to verify the proposed HER mechanism on the Pt/NGNs supports, as shown in the Supplementary Fig. 19. The calculated activation barrier was completed for the two models: a low loading of two H atoms and a high loading of four H atoms, resulting in energies of 0.664 and 0.571 eV, respectively. As previously discussed, the adsorption energy of a H atom on the single Pt atom catalyst decreases with an increase in the number of adsorbed H atoms (Supplementary Fig. 17), which promotes the formation of the H2 molecules. The adsorption of two H atoms on Pt (Supplementary Fig. 18a,b) results in a transformation of the hybrid orbital between the H and Pt atoms to change from to dxy+dyz when forming the H2 molecule. This orbital transformation results in the calculated energy barrier of 0.664 eV. On the other hand, when considering four H atoms, two reaction models previously outlined must be considered. The first model is the adsorption of two isolated H atoms and one H2 dimer, which results in the transformation of the hybrid orbital between the H and Pt atoms to change from to dxy+dyz with an energy barrier of 0.571 eV. Second, the adsorption of two H2 dimers on Pt results in a decreased adsorption energy of 0.336 eV per H in comparison with the four H atom model, which should further promote the ease of H2 production on the Pt atom. Importantly, it should be noted that the energy barrier for H2 formation is lower when four H atoms are present, thus clarifying that the H2 formation on single Pt atom catalysts is preferred at high H coverage. Moreover, the calculated activation barriers for both the two H and four H atoms models is smaller than that of the conventional Pt (111) surface (∼0.85 eV)56,57. The decreased activation barrier calculated for the HER of the single Pt atoms on N-doped graphene is consistent with our experimentally observed fast HER kinetics.
For practical applications concerning single-atom catalysts, a high activity and good stability are paramount to ensure a competitive performance is achieved in comparison with conventional NP catalysts. Furthermore, the performance will rely on achieving a high density of single atoms to ensure that the number of active sites is not reduced. To examine this effect, the performance of 50 ALD cycles was compared with 25 cycles. It was found that the current density of the ALD25Pt/NGNs sample was below that of commercial Pt/C catalysts, resulting in the lowest current density shown in Supplementary Fig. 20. The low specific activity of the ALD25Pt/NGNs sample may result from a low density of single Pt atoms/clusters (Pt loading of 0.19%) on the N-doped graphene. The low Pt density could be an effect of the low cycle number and nucleation delay60 in the first few ALD cycles.
In conclusion, we fabricated novel Pt catalysts supported by NGNs for the HER using the ALD technique. The size of the Pt catalysts ranged from single atoms, sub-nanometre clusters, to NPs, which were precisely controlled by adjusting the number of ALD cycles. Single Pt atoms and clusters showed exceptionally high activity and stability as HER catalysts compared with commercial Pt/C catalysts. The remarkable performance of the single Pt atoms and clusters arise from their small size and the unique electronic structure originating from of the adsorption of the single Pt atoms on the N-doped graphene, as confirmed by XANES and DFT analysis. Our work provides a promising approach for the design of highly active and stable next-generation catalysts based on single Pt atoms and clusters, which have a great potential to reduce the high cost of industrial commercial noble-metal catalysts.
Synthesis of GNs and NGNs
Graphite oxide was first obtained by a modified Hummers method previously reported by our group61,62. The received graphite oxide was then rapidly exfoliated via a thermal treatment at 1,050 °C under Ar atmosphere, yielding the product of GNs. NGNs were prepared by post-heating the graphene under high purity ammonia mixed with Ar at 900 °C for 10 min.
ALD synthesis of Pt on NGNs
Pt was deposited on the NGNs by ALD (Savannah 100, Cambridge Nanotechnology Inc., USA) using MeCpPtMe3 and O2 as precursors and a procedure similar to one previously reported19. High-purity N2 (99.9995%) was used as both a purging gas and carrier gas. The powder NGNs or GNs were placed in a container inside the ALD reactor chamber. The deposition temperature was 250 °C, while the container for MeCpPtMe3 was kept at 65 °C to provide a steady-state flux of MeCpPtMe3 to the reactor. Gas lines were held at 100 °C to avoid precursor condensation. For each ALD cycle, 1 s of the MeCpPtMe3 pulse and 5 s of the O2 pulse were separated by a 20 s N2 purge. The size, density and distribution of the Pt catalysts on the NGNs or GNs were precisely controlled by adjusting the number of ALD cycles.
The ADF STEM images were acquired using an FEI Titan 80–300 Cubed TEM equipped with a monochromator, hexapole-based aberration corrector (Corrected Electron Optical Systems GmbH) in both the probe and imaging lenses, and a high-brightness gun (XFEG) operated with an 80 kV accelerating voltage. High-resolution transmission electron microscopy was performed using an FEI 80–300 Cryo-Twin TEM with a Schottky field emission gun under negative Cs imaging conditions using a hexapole-based aberration corrector in the imaging lens and the electron source operated at 300 kV accelerating voltage. Samples were baked under vacuum at 100 °C before imaging to prevent beam contamination.
X-ray absorption spectroscopy
XANES measurements of the Pt L2-edge and the Pt L3-edge were conducted on the 06ID superconducting wiggler sourced hard X-ray microanalysis beamline at the Canadian Light Source. Each sample spectra were collected in fluorescence yield using a solid-state detector, while the high-purity Pt metal foil spectra were collected in transmission mode for comparison and monochromatic energy calibration.
WL intensity analysis was conducted based on previous research38,40. In this method, the Pt L3-edge WL intensity was obtained by subtracting the Pt L3-edge XANES from the corresponding XANES of Au. The area under the difference curve was integrated between the two vertical bars, and ΔA3 and ΔA2 were calculated using the following expressions:
According to Sham et al.40, these values are related to the following theoretical expressions:
where C0=4πr2α/3 (α is the fine structure constant), N0 is the density of Pt atoms, hj is the 5d hole counts, R is the radial transition matrix element, and E2 and E3 are the corresponding edge thresholds (Eo) for the L2- and L3-edges, respectively. By assuming that the R terms are similar for both edges
and with this approximation
The C value for these equations was previously derived for the Pt metal as 7.484 × 104 cm−1 (ref. 63).
A three-compartment cell was used for the electrochemical measurements with a glassy carbon rotating-disk electrode (Pine Instruments) as the working electrode. Hg/Hg2SO4 electrode and a Pt wire were used as the reference and the counter electrode, respectively. The potentials presented in this study are referred with respect to RHE.
The catalyst dispersions were prepared by mixing 3 mg of catalyst in a 2 ml aqueous solution containing 1 ml of isopropyl alcohol and 30 μl of 5 wt% Nafion solution. Following the solution preparation, the mixture was ultrasonicated for 30 min. Next, the working electrode was created by transferring 10 μl of the aqueous catalyst dispersion onto the glassy carbon rotating disk electrode (0.196 cm2). The working electrode was rotated at 1,600 r.p.m. to remove the H2 gas bubbles formed at the catalyst surface.
Our calculations are performed based on DFT calculations, as implemented in the Vienna ab initio package64,65. The general gradient approximation of Perdew–Burke–Ernzerhof is adopted for the exchange-correlation functional66. Moreover, the electron wave functions were expanded by a plane wave cutoff of 400 eV. The (5 × 5 × 1) supercell N-doped graphene contains 48 C atoms and 1 N atom was constructed by a periodic boundary condition, and the vacuum layers were set to be larger than 20 Å to avoid periodic interaction. Reciprocal space was performed by the Monkhorst–Pack special k-point scheme with 5 × 5 × 1 grid meshes for structure relaxation for the Pt adsorbed on N-doped graphene. Atomic relaxation was performed until the total energy variation was smaller than 10−6 eV and all forces on each atom were <0.01 eV Å−1. The van der Waals density functional67,68 approach was used to evaluate the effect of the van der Waals interaction68.
We determined the free energy barrier for the HER on the Pt adsorbed on N-doped graphene according to the Volmer–Tafel route using the climb image nudged elastic band method69. A set of images (N=9) is uniformly distributed along the reaction path connecting the initial and final states optimized in our simulation. To ensure the continuity of the reaction path, the images are coupled with elastic forces, and each intermediate state was fully relaxed in the hyperspace perpendicular to the reaction coordinate. The Bader charge analysis70 was performed to quantitatively estimate the amount of charge transfer between the adsorbed Pt (or H) and the N-doped graphene.
The data that support the findings of this study are available from the corresponding authors on request.
How to cite this article: Cheng, N. et al. Platinum single-atom and cluster catalysis of the hydrogen evolution reaction. Nat. Commun. 7, 13638 doi: 10.1038/ncomms13638 (2016).
Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Tong, W., West, A., Cheung, K., Yu, K.-M. & Tsang, S. C. E. Dramatic effects of gallium promotion on methanol steam reforming Cu–ZnO catalyst for hydrogen production: formation of 5 Å copper clusters from Cu–ZnGaOx . ACS Catal. 3, 1231–1244 (2013).
Crabtree, G. W., Dresselhaus, M. S. & Buchanan, M. V. The hydrogen economy. Phys. Today 57, 39–44 (2004).
Yu, K. M. K. et al. Non-syngas direct steam reforming of methanol to hydrogen and carbon dioxide at low temperature. Nat. Commun. 3, 1230 (2012).
Chorkendorff, I. & Niemantsverdriet, J. W. Concepts of Modern Catalysis and Kinetics Wiley-VCH (2003).
Subbaraman, R. et al. Enhancing hydrogen evolution activity in water splitting by tailoring Li+-Ni(OH)2-Pt interfaces. Science 334, 1256–1260 (2011).
Subbaraman, R. et al. Trends in activity for the water electrolyser reactions on 3d M(Ni,Co,Fe,Mn) hydr(oxy)oxide catalysts. Nat. Mater. 11, 550–557 (2012).
Yin, H. J. et al. Ultrathin platinum nanowires grown on single-layered nickel hydroxide with high hydrogen evolution activity. Nat. Commun. 6, 6430 (2015).
Merki, D. & Hu, X. L. Recent developments of molybdenum and tungsten sulfides as hydrogen evolution catalysts. Energ. Environ. Sci. 4, 3878–3888 (2011).
Chen, S., Duan, J., Tang, Y., Jin, B. & Qiao, S. Molybdenum sulfide clusters-nitrogen-doped graphene hybrid hydrogel film as an efficient three-dimensional hydrogen evolution electrocatalyst. Nano Energy 11, 11–18 (2015).
Voiry, D. et al. Enhanced catalytic activity in strained chemically exfoliated WS2 nanosheets for hydrogen evolution. Nat. Mater. 12, 850–855 (2013).
Gao, M. R. et al. An efficient molybdenum disulfide/cobalt diselenide hybrid catalyst for electrochemical hydrogen generation. Nat. Commun. 6, 5982 (2015).
Zheng, Y. et al. Hydrogen evolution by a metal-free electrocatalyst. Nat. Commun. 5, 3783 (2014).
Duan, J., Chen, S., Jaroniec, M. & Qiao, S. Porous C3N4 nanolayers@N-graphene films as catalyst electrodes for highly efficient hydrogen evolution. ACS Nano 9, 931–940 (2015).
Liu, J. et al. Metal-free efficient photocatalyst for stable visible water splitting via a two-electron pathway. Science 347, 970–974 (2015).
Stephens, I. E. L. & Chorkendorff, I. Minimizing the use of platinum in hydrogen-evolving electrodes. Angew. Chem. Int. Ed. 50, 1476–1477 (2011).
Esposito, D. V. et al. Low-cost hydrogen-evolution catalysts based on monolayer platinum on tungsten monocarbide substrates. Angew. Chem. Int. Ed. 49, 9859–9862 (2010).
Yang, X. F. et al. Single-atom catalysts: a new frontier in heterogeneous catalysis. Acc. Chem. Res. 46, 1740–1748 (2013).
Qiao, B. T. et al. Single-atom catalysis of CO oxidation using Pt1/FeOx . Nat. Chem. 3, 634–641 (2011).
Sun, S. H. et al. Single-atom catalysis using Pt/graphene achieved through atomic layer deposition. Sci. Rep. 3, 1775 (2013).
Uzun, A., Ortalan, V., Hao, Y. L., Browning, N. D. & Gates, B. C. Nanoclusters of gold on a high-area support: almost uniform nanoclusters imaged by scanning transmission electron microscopy. ACS Nano 3, 3691–3695 (2009).
Mackus, A. J. M., Verheijen, M. A., Leick, N., Bol, A. A. & Kessels, W. M. M. Influence of oxygen exposure on the nucleation of platinum atomic layer deposition: consequences for film growth, nanopatterning, and nanoparticle synthesis. Chem. Mater. 25, 1905–1911 (2013).
Yang, M. et al. Catalytically active Au-O(OH)x-species stabilized by alkali ions on zeolites and mesoporous oxides. Science 346, 1498–1501 (2014).
Zhang, X. F. et al. Catalytically active single-atom niobium in graphitic layers. Nat. Commun. 4, 1924 (2013).
Stambula, S. et al. Chemical structure of nitrogen-doped graphene with single platinum atoms and atomic clusters as a platform for the PEMFC electrode. J. Phys. Chem. C 118, 3890–3900 (2014).
George, S. M. Atomic layer deposition: an overview. Chem. Rev. 110, 111–131 (2010).
Marichy, C., Bechelany, M. & Pinna, N. Atomic layer deposition of nanostructured materials for energy and environmental applications. Adv. Mater. 24, 1017–1032 (2012).
Puurunen, R. L. Surface chemistry of atomic layer deposition: A case study for the trimethylaluminum/water process. J. Appl. Phys. 97, 121301 (2005).
Lu, J., Aydin, C., Browning, N. D. & Gates, B. C. Imaging isolated gold atom catalytic sites in zeolite NaY. Angew. Chem. Int. Ed. 51, 5842–5846 (2012).
Wang, S. W. et al. Dopants adsorbed as single atoms prevent degradation of catalysts. Nat. Mater. 3, 274–274 (2004).
Cheng, N. C. et al. Atomic scale enhancement of metal-support interactions between Pt and ZrC for highly stable electrocatalysts. Energ. Environ. Sci. 8, 1450–1455 (2015).
Conway, B. E. & Tilak, B. V. Interfacial processes involving electrocatalytic evolution and oxidation of H2, and the role of chemisorbed H. Electrochim. Acta 47, 3571–3594 (2002).
Zhang, S. R. et al. Catalysis on singly dispersed bimetallic sites. Nat. Commun. 6, 7938 (2015).
Liu, Y. & Mustain, W. E. Evaluation of tungsten carbide as the electrocatalyst support for platinum hydrogen evolution/oxidation catalysts. Int. J. Hydrogen Energ. 37, 8929–8938 (2012).
Jiang, Z. Z., Wang, Z. B., Chu, Y. Y., Gu, D. M. & Yin, G. P. Ultrahigh stable carbon riveted Pt/TiO2-C catalyst prepared by in situ carbonized glucose for proton exchange membrane fuel cell. Energ. Environ. Sci. 4, 728–735 (2011).
Xia, B. Y. et al. Sandwich-structured TiO2-Pt-graphene ternary hybrid electrocatalysts with high efficiency and stability. J. Mater. Chem. 22, 16499–16505 (2012).
Shao-Horn, Y. et al. Instability of supported platinum nanoparticles in low-temperature fuel cells. Top. Catal. 46, 285–305 (2007).
Cheng, N. A. C., Mu, S. C., Pan, M. & Edwards, P. P. Improved lifetime of PEM fuel cell catalysts through polymer stabilization. Electrochem. Commun. 11, 1610–1614 (2009).
Banis, M. N. et al. TiSi2Ox coated N-doped carbon nanotubes as Pt catalyst support for the oxygen reduction reaction in PEMFCs. J. Phys. Chem. C 117, 15457–15467 (2013).
Ho, V. T. T., Pan, C.-J., Rick, J., Su, W.-N. & Hwang, B.-J. Nanostructured Ti0.7Mo0.3O2 support enhances electron transfer to Pt: high-performance catalyst for oxygen reduction reaction. J. Am. Chem. Soc. 133, 11716–11724 (2011).
Sham, T. K., Naftel, S. J. & Coulthard, I. M3,2-edge X-ray absorption near-edge structure spectroscopy: an alternative probe to the L3,2-edge near-edge structure for the unoccupied densities of d states of 5d metals. J. Appl. Phys. 79, 7134–7138 (1996).
Mansour, A. N., Cook, J. W. & Sayers, D. E. Quantitative technique for the determination of the number of unoccupied d-electron states in a platinum catalyst using the L2,3 X-ray absorption-edge spectra. J. Phys. Chem. 88, 2330–2334 (1984).
Hu, P. P. et al. Electronic Metal-support interactions in single-atom catalysts. Angew. Chem. Int. Ed. 53, 3418–3421 (2014).
Qiao, B. et al. Ultrastable single-atom gold catalysts with strong covalent metal-support interaction (CMSI). Nano Res. 8, 2913–2924 (2015).
Kondo, T., Suzuki, T. & Nakamura, J. Nitrogen doping of graphite for enhancement of durability of supported platinum clusters. J. Phys. Chem. Lett. 2, 577–580 (2011).
Chen, Y. G. et al. Enhanced stability of Pt electrocatalysts by nitrogen doping in CNTs for PEM fuel cells. Electrochem. Commun. 11, 2071–2076 (2009).
Bulushev, D. A. et al. Single atoms of Pt-group metals stabilized by N-doped carbon nanofibers for efficient hydrogen production from formic acid. ACS Catal. 6, 3442–3451 (2016).
Cheng, N. et al. Extremely stable platinum nanoparticles encapsulated in a zirconia nanocage by area-selective atomic layer deposition for the oxygen reduction reaction. Adv. Mater. 27, 277–281 (2015).
Wu, J. F. et al. A review of PEM fuel cell durability: degradation mechanisms and mitigation strategies. J. Power Sources 184, 104–119 (2008).
Ghosh, T. K. & Nair, N. N. Rh1/γ-Al2O3 single-atom catalysis of O2 activation and CO oxidation: mechanism, effects of hydration, oxidation state, and cluster size. ChemCatChem 5, 1811–1821 (2013).
Hackett, S. F. J. et al. High-activity, single-site mesoporous Pd/Al2O3 catalysts for selective aerobic oxidation of allylic alcohols. Angew. Chem. Int. Ed. 119, 8747–8750 (2007).
Zhang, X., Shi, H. & Xu, B. Q. Catalysis by gold: isolated surface Au3+ Ions are active sites for selective hydrogenation of 1, 3-butadiene over Au/ZrO2 catalysts. Angew. Chem. Int. Ed. 44, 7132–7135 (2005).
Norskov, J. K., Bligaard, T., Rossmeisl, J. & Christensen, C. H. Towards the computational design of solid catalysts. Nat. Chem. 1, 37–46 (2009).
Conway, B. & Tilak, B. Interfacial processes involving electrocatalytic evolution and oxidation of H2, and the role of chemisorbed H. Electrochim. Acta 47, 3571–3594 (2002).
Parsons, R. The rate of electrolytic hydrogen evolution and the heat of adsorption of hydrogen. Trans. Faraday Soc. 54, 1053–1063 (1958).
Ge, M., Fang, X., Rong, J. & Zhou, C. Review of porous silicon preparation and its application for lithium-ion battery anodes. Nanotechnology 24, 422001 (2013).
Wei, G.-F. & Liu, Z.-P. Restructuring and hydrogen evolution on Pt nanoparticle. Chem. Sci. 6, 1485–1490 (2015).
Skúlason, E. et al. Modeling the electrochemical hydrogen oxidation and evolution reactions on the basis of density functional theory calculations. J. Phys. Chem. C 114, 18182–18197 (2010).
Okamoto, Y. Comparison of hydrogen atom adsorption on Pt clusters with that on Pt surfaces: a study from density-functional calculations. Chem. Phys. Lett. 429, 209–213 (2006).
Papoian, G., Nørskov, J. K. & Hoffmann, R. A comparative theoretical study of the hydrogen, methyl, and ethyl chemisorption on the Pt (111) surface. J. Am. Chem. Soc. 122, 4129–4144 (2000).
Cheng, N., Shao, Y., Liu, J. & Sun, X. Electrocatalysts by atomic layer deposition for fuel cell applications. Nano Energy http://dx.doi.org/10.1016/j.nanoen.2016.01.016 (2016).
Geng, D. et al. High oxygen-reduction activity and durability of nitrogen-doped graphene. Energ. Environ. Sci. 4, 760–764 (2011).
Kibsgaard, J., Gorlin, Y., Chen, Z. & Jaramillo, T. F. Meso-structured platinum thin films: active and stable electrocatalysts for the oxygen reduction reaction. J. Am. Chem. Soc. 134, 7758–7765 (2012).
Mattheiss, L. F. & Dietz, R. E. Relativistic tight-binding calculation of core-valence transitions in Pt and Au. Phys. Rev. B 22, 1663–1676 (1980).
Kresse, G. & Furthmüller, J. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set. Comput. Mater. Sci. 6, 15–50 (1996).
Kresse, G. & Furthmüller, J. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set. Phys. Rev. B 54, 11169 (1996).
Perdew, J. P. et al. Atoms, molecules, solids, and surfaces: applications of the generalized gradient approximation for exchange and correlation. Phys. Rev. B 46, 6671 (1992).
Dion, M., Rydberg, H., Schroder, E., Langreth, D. C. & Lundqvist, B. I. Van der Waals density functional for general geometries. Phys. Rev. Lett. 92, 246401 (2004).
Klimes, J., Bowler, D. R. & Michaelides, A. Van der Waals density functionals applied to solids. Phys. Rev. B 83, 195131 (2011).
Henkelman, G., Uberuaga, B. P. & Jónsson, H. A climbing image nudged elastic band method for finding saddle points and minimum energy paths. J. Chem. Phys. 113, 9901–9904 (2000).
Henkelman, G., Arnaldsson, A. & Jónsson, H. A fast and robust algorithm for Bader decomposition of charge density. Comput. Mater. Sci. 36, 354–360 (2006).
This research was supported by Catalysis Research for Polymer Electrolyte Fuel Cells (CaRPE-FC), Natural Sciences and Engineering Research Council of Canada (NSERC), Canadian Light Source (CLS), Canada Research Chair (CRC) Program, Canada Foundation for Innovation (CFI), Ontario Research Fund (ORF), Automotive Partnership of Canada (APC) and the University of Western Ontario. The electron microscopy presented here was completed at the Canadian Center for Electron Microscopy, a facility supported by the Canada Foundation for Innovation, NSERC and McMaster University. L.L.M. was supported by the National Natural Science Foundation of China (NSFC) (grant no. 51572016 and U1530401). The computation supports from Tianhe-JK at the Beijing Computational Science Research Center (CSRC) and the Special Program for Applied Research on Super Computation of the NSFC-Guangdong Joint Fund (the second phase) are also acknowledged.
The authors declare no competing financial interests.
About this article
Cite this article
Cheng, N., Stambula, S., Wang, D. et al. Platinum single-atom and cluster catalysis of the hydrogen evolution reaction. Nat Commun 7, 13638 (2016). https://doi.org/10.1038/ncomms13638
Ru-tweaking of non-precious materials: the tale of a strategy that ensures both cost and energy efficiency in electrocatalytic water splitting
Journal of Materials Chemistry A (2021)
The Journal of Physical Chemistry C (2021)
Applied Surface Science (2021)
Applied Surface Science (2021)
Journal of Hazardous Materials (2021)