Abstract
With the recent development of optomechanics, the vibration in solids, involving collective motion of trillions of atoms, gradually enters into the realm of quantum control. Here, building on the recent remarkable progress in optical control of motional states of diamonds, we report an experimental demonstration of quantum teleportation from light beams to vibrational states of a macroscopic diamond under ambient conditions. Through quantum process tomography, we demonstrate average teleportation fidelity (90.6±1.0)%, clearly exceeding the classical limit of 2/3. The experiment pushes the target of quantum teleportation to the biggest object so far, with interesting implications for optomechanical quantum control and quantum information science.
Introduction
Quantum teleportation has found important applications for realization of various quantum technologies^{1,2,3,4}. Teleportation of quantum states has been demonstrated between light beams^{5,6,7,8}, trapped atoms^{9,10,11,12}, superconducting qubits^{13}, defect spins in solids^{14} and from light beams to atoms^{15,16} or solidstate spin qubits^{17,18}. It is of both fundamental interest and practical importance to push quantum teleportation towards more macroscopic objects. Observing quantum phenomenon in macroscopic objects is a big challenge, as their strong coupling to the environment causes fast decoherence that quickly pushes them to the classical world. For example, quantum coherence is hard to survive in mechanical vibration of macroscopic solids, which involves collective motion of a large number of strongly interacting atoms. Despite this challenge, achieving quantum control for the optomechanical systems becomes a recent focus of interest with remarkable progress^{19,20,21,22,23,24,25,26,27,28,29,30}. This is driven in part by the fundamental interest and in part by the potential applications of these systems for quantum signal transduction^{25,26,27}, sensing^{19} and quantum information processing^{19,20,21}. There are typically two routes to achieve quantum control for the optomechanical systems: one needs to either identify some isolated degrees of freedom in mechanical vibrations and cool them to very low temperature to minimize their environmental coupling^{19,28,29,30}, or use the ultrafast laser technology to fast process and detect quantum coherence in such systems^{20,21,22,23,24}. A remarkable example for the latter approach is provided by the optomechanical control in macroscopic diamond samples^{20,21}, where the motions of two separated diamonds have been cast into a quantumentangled state^{20}.
In this paper, we report an experimental demonstration of quantum teleportation from light beams to the vibrational states of a macroscopic diamond sample of 3 × 3 × 0.3 mm^{3} in size under ambient conditions. The vibration states are carried by two optical phonon modes, representing collective oscillation of over 10^{16} carbon atoms. To facilitate convenient qubit operations, we use the dualrail representation of qubits instead of the singlerail encoding used in the previous experiments^{20,21,22,23} and generate entanglement between the paths of a photon and different oscillation patterns of the diamond represented by two phononic modes. Using quantum state tomography, we demonstrate entanglement fidelity of (81.0±1.8)% with the raw data and of (89.7±1.2)% after the background noise subtraction. Using this entanglement, we prepare arbitrary polarization states for the photon and teleport these polarization states to the phonon modes, with the Bell measurements on the polarization and the path qubits carried by the same photon. The teleportation is verified by quantum process tomography (QPT), and we achieve a high average teleportation fidelity, ∼(90.6±1.0)% (or (82.9±0.8)%) after (or before) subtraction of the background noise. To verify the phonon’s state before its fast decay, our implementation of teleportation adopted the technique of reversed time ordering introduced in ref. 20 where the phonon’s state is read out before the teleportation is completed. Similar to the pioneering teleportation experiment of photons^{5}, our implementation of teleportation is conditional, as the Bell measurements are not deterministic and require postselecting of successful measurement outcomes.
Results
Photontophonon teleportation scheme
We illustrate our entanglement generation and quantum teleportation scheme in Fig. 1, using a type IIa singlecrystal synthetic diamond sample cut along the 100 face from the Element Six company. Due to the strong interaction of atoms in the diamond, the optical phonon mode, which represents relative oscillation of the two sublattices in the stiff diamond lattice (Fig. 1a), has a very high excitation frequency ∼40 THz near the momentum zero point in the Brillouin zone. The corresponding energy scale for this excitation is significantly higher than the room temperature thermal energy (∼6 THz), and thus the optical phonon mode naturally stays at the vacuum state under ambient conditions, which simplifies its quantum control^{20,21}. The coherence life time of the optical phonon mode is ∼7 ps at room temperature, which is short, but accessible with the ultrafast laser technology for which the operational speed can be up to ∼10 THz (refs 20, 21).
We excite the optical phonon modes through ultrafast laser pulses of duration ∼150 fs from the Ti–sapphire laser, with the carrier wavelength at 706.5 nm. The diamond has a large bandgap of 5.5 ev, so the laser pulses are far detuned from the conduction band with a large gap ∼900 THz. Each laser pulse generates, with a small probability p_{s}, an excitation in the optical phonon mode and a Stokes photon of wavelength 780 nm in the forward direction (Fig. 1a). The relevant output state has the form
where and represent, respectively, the creation operators for an optical phonon and a Stokes photon, and vac〉 denotes the common vacuum state for both the photon and the phonon modes.
To generate entanglement, we split the laser pulse into two coherent paths as shown in Fig. 1b, and the pulse in each path generates the corresponding phonon–photon correlated state described by equation 1. When there is an output photon, in one of the two paths, it is in the following maximally entangled state with the phonon excitation
Here or represents an excitation in the upper or lower path, and its subscript denotes the nature of the excitation, ‘n’ for a phonon and ‘t’ for a photon. We drop the vacuum term in equation (1), as it is eliminated if we detect a photon emerging from one of the two paths. After entanglement generation, the photon state can be directly measured through singlephoton detectors. To read out the phonon state, we apply another ultrafast laser pulse after a controllable delay within the coherence time of the optical phonon mode, and convert the phononic state to the same photonic state in the forward antiStokes mode at the wavelength of 645 nm (Fig. 1c). The state of the antiStokes photon is then measured through singlephoton detectors together with linear optics devices. Note that the retrieval laser pulse could have a carrier frequency ω_{r} different from that of the pump laser. For instance, with ω_{r} near the telecom band, our teleportation protocol would naturally realize a quantumfrequency transducer that transfers the photon’s frequency to a desired band, without changing its quantum state. A quantumfrequency transducer is widely recognized as an important component for realization of longdistance quantum networks^{25,26,27}.
To realize teleportation, we need to prepare another qubit, whose state will be teleported to the phonon modes in the diamond. Similar to the teleportation experiments in refs 6, 16, we use the polarization state of the photon to represent the input qubit, which can be independently prepared into an arbitrary state , where and denote the horizontal and the vertical polarization states and c_{0}, c_{1} are arbitrary coefficients. The Bell measurements on the polarization and the path qubits carried by the same photon can be implemented through linear optic devices together with singlephoton detection (Fig. 1d), and the teleported state to the phononic modes is retrieved and detected through its conversion to the antiStokes photon. Same as ref. 20, the short life time of the diamond’s vibration modes requires us to retrieve and detect the phonon’s state before applying detection on the Stokes photon, thus the phonon’s state is measured before the teleportation protocol is completed. The reversed time ordering in this demonstration of quantum teleportation makes it unsuitable for application in quantum repeaters that requires a much longer memory time; however, it does not affect application of our teleportation experiment for realization of a quantumfrequency transducer or a new source of entangled photons as discussed above.
Experimental realization of teleportation
Our experimental setup is shown in Fig. 2. First, we verify entanglement generated between the Stokes photon and the optical phonon modes in the diamond. For this step, we remove the optical elements in the state preparation box shown in Fig. 2 and set the angle of halfwave plate (HWP3) to 0°. Different from the scheme illustrated in Fig. 1, we insert semicircle HWPs set at 0° and 45°, respectively, at the upper and the lower paths of the pump beam, so that both the Stokes photon and the antiStokes photon after the retrieval pulse have orthogonal polarizations along the two output paths, which can be combined together through the calcites C2 and C3. This facilitates the entanglement measurement through the detection in complementary local bases by rotating the polarizers P2 and P3, and the wave plates HWP5 and quarterwave plate 2. Due to the different incident directions of the pump pulses at the upper and the lower paths, the corresponding phonon modes excited in the diamond have different momenta, so they represent independent modes even if they have partial spatial overlap. The phonon is converted to the antiStokes photon by the retrieval pulse, so we measure the photon–phonon state by detecting the coincidence counts between Stokes and antiStokes photons in different bases. In Fig. 3a, we show the registered coincidence counts, as we rotate the angle of the polarizer P2. The oscillation of the coincidence counts with a visibility of (74.6±3.6)% is an indicator of coherence of the underlying state. To verify entanglement of the photon–phonon state, we use quantum state tomography to reconstruct the full density matrix from the measured coincidence counts^{31}, with the resulting matrix elements shown in Fig. 3b. From the reconstructed density matrix ρ_{e}, we find its entanglement fidelity, defined as the maximum overlap of ρ_{e} with a maximally entangled state, F_{e}=(81.0±1.8)%, significantly higher than the criterion of F_{e}=0.5 for verification of entanglement^{32}. The error bars are determined by assuming a Poissonian distribution for the photon counts and propagated from the raw data to the calculated quantities through exact numerical simulation. The dominant noise in this system comes from the accidental coincidence between the detected Stokes and the antiStokes photons^{20,21}. To measure the contribution of this accidental coincidence, we introduce an extra time delay of 13 ns, the repetition period of our pump pulses, to one of the detectors when we record the coincidence. When we subtract the background noise due to this accidental coincidence, the resulting matrix elements reconstructed from the quantum state tomography are shown in Fig. 3c. We find the entanglement fidelity is improved to F_{e}=(89.7±1.2)% after subtraction of the accidental coincidence.
To perform quantum teleportation using the photon–phonon entanglement, we first transform the effective photon–phononentangled state to the standard form of equation 2, by the semicircle HWPs in the state preparation box of Fig. 2. The polarizer P1, and the wave plates HWP2 and quarterwave plate 1 then prepare the tobeteleported photon polarization to arbitrary superposition states . We perform Bell measurement through the calcite C2, the HWP3, the polarizer P2 and the detector APD2. For instance, with the HWP3 set at 0° and the polarizer P2 set along the direction , a photon count in the detector APD2 corresponds to a projection to the Bell state for the polarization and the path qubits of the photon before the measurement box. By rotating the angles of HWP3 and P2, we can also perform projection to any other Bell states.
The experimental result for teleportation is shown in Fig. 4. The teleportation fidelity is defined as , where Φ_{in}〉 is the input state at Alice’s side and ρ_{out} denotes the output density matrix at Bob’s side, reconstructed through quantum state tomography measurements. In Fig. 4a, we show the teleportation fidelity under six complementary bases states with in cases with and without subtraction of the background noise. The average fidelity over these six bases states is (93.9±0.8)% (or (83.0±0.8)%) with (or without) background noise subtraction. This average fidelity is significantly >2/3, the boundary value for the fidelity that separates quantum teleportation from classical operations. For more complete characterization, we also perform QPT for the teleportation operation. In the ideal case, teleportation should be characterized by an identity transformation, meaning that Alice’s input state is teleported perfectly to Bob’s side. The experimentally reconstructed process matrix elements are shown in Fig. 4b (see Methods for explanation of QPT). The process fidelity is given by F_{p}=(85.9±1.6)%, which corresponds to a teleportation fidelity =(90.6±1.0)% averaged over all possible input states, with equal weight in the qubit space.
Discussion
Teleportation of the quantum states from a photon to the vibration modes of a millimetersized diamond under ambient conditions generates a quantum link between the microscopic particle and the macroscopic world around us, usually under the law of classical physics. In our experiment, the ultrafast laser technology provides the key tool for the fast processing and detection of quantum states within its short life time in macroscopic objects, consisting of many strongly interacting atoms that are coupled to the environment. Combined with the tunability of the wavelength for the retrieval laser pulse^{23}, the technique introduced in our experiment would be useful for the realization of a new source of entangled photons based on the diamond optomechanical coupling with the dualrail encoding. Such a source could generate entangled photons at wavelengths inconvenient to produce by other methods. For instance, we may generate entanglement between the ultraviolet and infrared photons, with the infrared photon good for quantum communication and the ultraviolet photon convenient to be interfaced with other qubits, such as the ion matter qubits. Such a photon source is hard to generate by the conventional spontaneous parametric down conversion method. In future, the tools based on the ultrafast pump and probe could be combined with the powerful laser cooling or lowtemperature technology to provide more efficient ways for quantum control of the optomechanical systems, with important applications for realization of transduction of quantum signals^{25,26}, processing of quantum information or singlephoton signals^{19,20,23} and sensing of small mechanical vibrations^{19}.
Methods
Quantum process tomography
QPT^{31} is defined by a completely positive map ɛ : ρ_{f}≡ɛ(ρ_{i}) that transfers an arbitrary input state ρ_{i} to the output ρ_{f}. It can be characterized by a unique process matrix χ_{mn} through the map , by choosing a fixed set of basis operator E_{m}. In our experiment, we set the basis operators E_{m} to be the identity operator I and the three Pauli matrices X=σ_{x}, Y=−iσ_{y}, Z=σ_{z}. This corresponds to a choice of six complementary input states , , , , and for the teleportation. We reconstruct the output state from teleportation by quantum state tomography and use them to calculate the process matrix χ through the maximally likelihood estimation^{31}. The process fidelity is determined by F_{p}=Tr(χχ_{id}), where χ_{id} is the identity process matrix corresponding to the perfect case. The process fidelity F_{p} determines the average teleportation fidelity by the formula (ref. 31), where is defined as the fidelity averaged over all possible states of the input qubit with equal weight.
Data availability
The data that support the findings of this study are available from the corresponding author upon request.
Additional information
How to cite this article: Hou, P.Y. et al. Quantum teleportation from light beams to vibrational states of a macroscopic diamond. Nat. Commun. 7:11736 doi: 10.1038/ncomms11736 (2016).
Change history
09 June 2016
The HTML version of this Article previously published included an incorrect version of the Peer Review File. This has now been corrected in the HTML version of the Article; the PDF was correct from the time of publication.
References
Bennett, C. H. et al. Teleporting an unknown quantum state via dual classical and EinsteinPodolskyRosen channels. Phys. Rev. Lett. 70, 1895–1899 (1993).
Briegel, H.J., Dur, W., Cirac, J. I. & Zoller, P. Quantum repeaters: the role of imperfect local operations in quantum communication. Phys. Rev. Lett. 81, 5932–5935 (1998).
Gottesman, D. & Chuang, I. L. Demonstrating the viability of universal quantum computation using teleportation and singlequbit operations. Nature 402, 390–393 (1999).
Duan, L. M., Lukin, M. D., Cirac, J. I. & Zoller, P. Longdistance quantum communication with atomic ensembles and linear optics. Nature 414, 413–418 (2001).
Bouwmeester, D. et al. Experimental quantum teleportation. Nature 390, 575–579 (1997).
Boschi, D. et al. Experimental realization of teleporting an unknown pure quantum state via dual classical and EinsteinPodolskyRosen channels. Phys. Rev. Lett. 80, 1121–1125 (1998).
Furusawa, A. et al. Unconditional quantum teleportation. Science 282, 706–709 (1998).
Takeda, S. et al. Deterministic quantum teleportation of photonic quantum bits by a hybrid technique. Nature 500, 315–318 (2013).
Riebe, M. et al. Deterministic quantum teleportation of atomic qubits. Nature 429, 734–737 (2004).
Barrett, M. D. et al. Deterministic quantum teleportation with atoms. Nature 429, 737–739 (2004).
Olmschenk, S. et al. Quantum teleportation between distant matter qubits. Science 323, 486–489 (2009).
Krauter, H. et al. Deterministic quantum teleportation between distant atomic objects. Nature Phys. 9, 400–404 (2013).
Steffen, L. et al. Deterministic quantum teleportation with feedforward in a solid state system. Nature 500, 319–322 (2013).
Pfaff, W. et al. Unconditional quantum teleportation between distant solidstate quantum bits. Science 345, 532–535 (2014).
Sherson, J. F. et al. Quantum teleportation between light and matter. Nature 443, 557–560 (2006).
Chen, Y.A. et al. Memorybuiltin quantum teleportation with photonic and atomic qubits. Nature Phys. 4, 103–107 (2008).
Gao, W. B. et al. Quantum teleportation from a propagating photon to a solidstate spin qubit. Nature Commun. 4, 3744 (2013).
Bussieres, F. et al. Quantum teleportation from a telecomwavelength photon to a solidstate quantum memory. Nature Photon. 8, 775–778 (2014).
Aspelmeyer, M., Kippenberg, T. J. & Marquardt, F. Cavity optomechanics. Rev. Mod. Phys. 86, 1391–1452 (2014).
Lee, K. C. et al. Entangling macroscopic diamonds at room temperature. Science 334, 1253–1256 (2011).
Lee, K. C. et al. Macroscopic nonclassical states and terahertz quantum processing in roomtemperature diamond. Nature Photon. 6, 41–44 (2012).
England, D. G. et al. Storage and retrieval of THzbandwidth single photons using a roomtemperature diamond quantum memory. Phys. Rev. Lett. 114, 053602 (2015).
Fisher, K. A. G. et al. Frequency and bandwidth conversion of single photons in a roomtemperature diamond quantum memory. Nature Commun. 7, 11200 (2016).
Bustard, P. J. et al. Ramaninduced slowlight delay of THzbandwidth pulses. Phys. Rev. A 93, 043810 (2016).
Stannigel, K., Rabl, P., Soensen, A. S., Zoller, P. & Lukin, M. D. Optomechanical transducers for longdistance quantum communication. Phys. Rev. Lett. 105, 220501 (2010).
Rabl, P. et al. A quantum spin transducer based on nanoelectromechanical resonator arrays. Nature Phys. 6, 602–608 (2010).
Dong, C.H., Fiore, V., Kuzyk, M. C. & Wang, H.L. Optomechanical dark mode. Science 338, 1609–1613 (2012).
Gigan, S. et al. Selfcooling of a micromirror by radiation pressure. Nature 444, 67–70 (2006).
O’Connell, A. D. et al. Quantum ground state and singlephonon control of a mechanical resonator. Nature 464, 697–703 (2010).
Li, T.C., Kheifets, S. & Raizen, M. G. Millikelvin cooling of an optically trapped microsphere in vacuum. Nature Phys. 7, 527–530 (2011).
White, A. G. et al. Measuring twoqubit gates. J. Opt. Soc. Am. B 24, 172–183 (2007).
Blinov, B. B. et al. Observation of entanglement between a single trapped atom and a single ion. Nature 428, 153–157 (2004).
Acknowledgements
This work was supported by the Ministry of Education of China through its grant to Tsinghua University. L.M.D. acknowledges in addition support from the Intelligence Advanced Research Projects Activity (IARPA) quantum computing program, the Army Research Lab (ARL) quantum network program, and the Air Force Office of Scientific Research (AFOSR) Multidisciplinary University Research Initiative (MURI) program.
Author information
Authors and Affiliations
Contributions
L.M.D. designed the experiment and supervised the project. P.Y.H., Y.Y.H., X.X.Y., X.Y.C., C.Z. and L.H. carried out the experiment. L.M.D. and P.Y.H. wrote the manuscript.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Supplementary information
Rights and permissions
This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/
About this article
Cite this article
Hou, PY., Huang, YY., Yuan, XX. et al. Quantum teleportation from light beams to vibrational states of a macroscopic diamond. Nat Commun 7, 11736 (2016). https://doi.org/10.1038/ncomms11736
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/ncomms11736
Further reading

Quantum teleportation from light to motion
Nature Photonics (2021)

Optomechanical quantum teleportation
Nature Photonics (2021)

Bipartite Entanglement in Optomechanical Cavities Driven by Squeezed Light
International Journal of Theoretical Physics (2020)

Controlled teleportation of an arbitrary twoqubit entanglement in noises environment
Quantum Information Processing (2019)

Theoretical Aspects of Continuous Variables Quantum Teleportation Based on PhaseSensitive FourWave Mixing
International Journal of Theoretical Physics (2019)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.