Graphene nanoribbons (GNRs)—narrow stripes of graphene—have emerged as promising building blocks for nanoelectronic devices. Recent advances in bottom-up synthesis have allowed production of atomically well-defined armchair GNRs with different widths and doping. While all experimentally studied GNRs have exhibited wide bandgaps, theory predicts that every third armchair GNR (widths of N=3m+2, where m is an integer) should be nearly metallic with a very small bandgap. Here, we synthesize the narrowest possible GNR belonging to this family (five carbon atoms wide, N=5). We study the evolution of the electronic bandgap and orbital structure of GNR segments as a function of their length using low-temperature scanning tunnelling microscopy and density-functional theory calculations. Already GNRs with lengths of 5 nm reach almost metallic behaviour with ∼100 meV bandgap. Finally, we show that defects (kinks) in the GNRs do not strongly modify their electronic structure.
Graphene nanoribbons (GNRs) are a new class of materials that have promising applications in next-generation nanoelectronic and optoelectronic devices1,2,3. These systems have been thoroughly studied theoretically at various levels of sophistication4,5,6,7,8,9. According to these studies, the electronic and magnetic properties can be tuned by the nanoribbon chemical structure and edge geometry, ranging from semiconductors7,8 to spin-polarized half-metals6. Zigzag edge structure is predicted to result in spin-polarized edge states, with potential applications in spintronics4,6,10. On the other hand, in armchair GNRs, quantum confinement opens a bandgap that sensitively depends on the ribbon width, allowing in principle for the design of GNR-based structures with tuneable properties. The armchair ribbons can be grouped into three families, that is, N=3p, N=3p+1 and N=3p+2, where p is an integer and N the number of carbon atoms along the GNR width4,11. N=3p and N=3p+1 families have wide bandgaps that scale inversely with the ribbon width. In contrast, simple models predict the family N=3p+2 to be metallic with zero bandgap4,12. More sophisticated models taking into account, for example, edge relaxation predict non-vanishing but small bandgaps8,13. These narrow armchair GNRs with narrow or vanishing bandgaps would form ideal molecular wires to be used as interconnects in molecular scale circuitry. However, this requires atomic-level control of the edge structure, which is far beyond the existing top–down approaches such as electron beam lithography. Recently, tremendous progress has been made in bottom-up chemical synthesis of GNRs from molecular precursors14,15,16,17,18,19,20,21,22,23. The synthesis of these ribbons proceeds in two thermally activated steps14. First step is the cleavage of halogens from the precursors and the formation of a covalently coupled polymer through radical addition reaction. The linear chain is converted into graphene in the second step that involves cyclodehydrogenation at a higher temperature. By changing the monomer design, the fabrication of a wide range of GNRs including different widths and doping can be achieved.
Despite several kinds of armchair GNRs having been synthesized via specific molecular precursors2,16,17,18,19,21,22,23,24,25,26, the studied widths have been rather limited. Most of them belong to the wide bandgap N=3p+1 family and narrow bandgap, near-metallic behaviour has not been verified experimentally. We focus on the N=3p+2 family and target the narrowest member of this family with N=5. The synthesis starts with a dibromoperylene molecule, which undergoes dehalogenation and cyclodehydrogenation steps to yield atomically perfect N=5 armchair GNRs. This width is predicted to be metallic within a nearest-neighbour tight-binding model4,7. More realistic calculations predict the presence of a bandgap, but it should remain much smaller than that found in armchair GNRs of the other families7. We confirm these theoretical predictions and measure experimentally a ∼100 meV bandgap in long GNRs using low-temperature scanning tunnelling microscopy (STM). This near-metallic regime is already reached in GNRs of six perylene monomer units, that is, with lengths longer than 5 nm. In addition, we study the effect of the ribbon length on the electronic structure and map out the local density of states (LDOS) in real space using scanning tunnelling spectroscopy. The experimental results are corroborated by density-functional theory (DFT) calculations that are used to identify the fingerprints of molecular orbitals as a function of the GNR length. Finally, we show that defects (kinks) in the GNRs do not destroy the near-metallic behaviour. Our results demonstrate that this armchair GNR subfamily can be used as molecular wires that should exhibit metallic behaviour at room temperature. This suggest that these GNRs would form ideal interconnects in molecular scale electronic circuitry.
Growth of N=5 armchair GNRs
We grew armchair GNRs in ultrahigh vacuum (UHV) using the on-surface polymerization with dibromoperylene C20H10Br2 (DBP) as the molecular precursor (Fig. 1a)23. This process yields very narrow 5-GNRs with armchair edge structure. Details of the sample preparation can be found in the Methods section. The resulting GNRs were characterized by low-temperature STM at T=5 K. We used a mixture of precursor monomers with either parallel or antiparallel positions of Br atoms (3,9-DBP or 3,10-DBP). Regardless of the positions of the Br atoms, fully conjugated ribbons are formed. A typical overview STM scan is shown in Fig. 1b. These ribbons align and assemble along or perpendicular to the direction of the herringbone reconstruction of the Au(111) substrate. Most ribbons are isolated and easily manipulated along the ribbon axis due to the weak interaction with the underlying Au(111) substrate. While most of the GNRs are straight, there is a significant number of non-straight GNRs. These kinked ribbons are formed by two (or more) straight segments connecting during the initial polymerization step with an angle of 30°. The structure and electronic properties of these kinked ribbons will be discussed in detail later. Statistics on the ribbon lengths and the fraction of kinked ribbons are given in Supplementary Fig. 1. Figure 1c shows a high-resolution STM image with GNRs with several different lengths. The shortest ribbons we observe consist of two monomers, a medium length ribbon of 5-monomer units is highlighted with an overlaid model structure. We can easily determine the number of monomer units by counting the number of benzene rings (lobes) along the armchair edges of the GNRs.
Evolution of GNR orbitals as a function of length
We have performed detailed differential conductance (dI/dV) spectroscopy experiments as a function of the ribbon length to probe the corresponding changes in their electronic structure. In the following, we will use two ribbon lengths (3 and 5 monomer units) to highlight how the ribbon electronic states change with length. A characteristic spectrum (red curve, Fig. 2a) recorded close to the edge of a 3-monomer GNR exhibits a pronounced shoulder at −1.02 V and a prominent peak at −160 mV (labelled states 1 and 2, respectively). These states correspond to the highest occupied molecular orbitals HOMO-1 (state 1) and HOMO (state 2). At positive bias, we probe the lowest unoccupied states. We find states at 540 mV (state 3) and 1.8 V (state 4), which correspond to the lowest and second lowest unoccupied molecular orbitals (LUMO and LUMO+1). The additional feature observed in the dI/dV spectrum around 1.2 V did not show any contrast in the dI/dV map and it originates from the background signal (black line).
We probe the symmetries of the different molecular orbitals by mapping the spatially resolved dI/dV signal at the energies corresponding to the resonances (Fig. 2c). The experimental maps show that both the HOMO and LUMO are extended through the ribbon, in contrast to the localized end states observed on wider armchair GNRs2,19. The LUMO+1 has one more nodal plane compared with the LUMO as expected. The corresponding calculated LDOS maps (Fig. 2e) are in excellent agreement with the experimental results, clearly reproducing the occupied and unoccupied states. The unoccupied orbitals yield broader resonances in the dI/dV spectra and their spatial maps are not as well resolved as for the occupied states. This is likely to be caused by shorter lifetime of the tunnelling electrons on these states leading to increased lifetime broadening. Nevertheless, the orbitals can be identified by the conductance mapping.
Figure 2b shows the dI/dV spectra acquired at different locations along a 5-monomer GNR. The corresponding experimental and calculated conductance maps are shown in Fig. 2d,f. The occupied states are found at −550 and 26 mV referred as HOMO-1 and HOMO, respectively. The orbital corresponding to the HOMO of an isolated ribbon is found at positive bias, that is, the ribbon has become positively charged on the Au(111) substrate. We find this transition to occur between 4- and 5-monomer long ribbons. It is consistent with the known p-doping of bulk graphene on a gold substrate27,28. The unoccupied states found at 250 mV, 850 mV, 1.25 V and 1.57 V are referred to as LUMO, LUMO+1, LUMO+2 and LUMO+3, respectively. These unoccupied states follow the energies expected for one-dimensional particle-in-a-box states of massless Dirac fermions. In addition to these resonances corresponding to single molecular orbitals, there are two further peaks (peaks 7 and 8 in Fig. 2b) in the experimental dI/dV spectra. According to the DFT calculations, these correspond to several closely spaced orbitals (Supplementary Fig. 2). This is further corroborated by simulated LDOS maps that nicely reproduce the spatial features of the experimental maps.
In addition to quantum confinement, which makes the electronic structure of finite graphene ribbons very sensitive to the width, finite-size effects have to be taken into account to determine the scaling of the HOMO–LUMO energy gap with the length of the ribbon. Here, we will examine how the finite-size effects affect the energies of molecular levels in the transition from short to long ribbons. Experimental orbital energies with respect to Fermi level extracted from dI/dV spectra are depicted in Fig. 3a for different ribbon lengths. As can be seen, the gap between the highest occupied and the lowest unoccupied molecular orbitals closes quickly with increasing ribbon length. As indicated earlier, the HOMO level crosses the Fermi level between 4- and 5-monomer long ribbons, that is, the ribbon becomes positively charged (this is illustrated in Supplementary Fig. 3). The middle of the gap extrapolates to 0.20±0.02 eV versus gold Fermi level, in agreement with the doping of bulk graphene on Au(111)27,28. There is no significant abrupt shift of the orbital energies due to the charging of the ribbons, which indicates that the charging energy is small and can be neglected29. This also implies that the STM transport gap is nearly equal to the single-particle HOMO–LUMO gap.
We plot the HOMO–LUMO gap as a function of the length of the ribbon in Fig. 3b along with values from the DFT calculations on isolated ribbons. The HOMO–LUMO gap decreases very quickly with increasing ribbon length (scaling roughly as 1/L2) and is below 200 meV already for 5-monomer ribbons (length of ca. 4 nm). It saturates to value of 0.10±0.02 eV corresponding to a small but finite energy gap in long ribbons. The spacing between the HOMO and HOMO-1 also decreases, but with a different scaling (roughly 1/L). This scaling indicates that these states can be viewed as quantum confined levels of particles with linear dispersion as expected in graphene. The HOMO-1–HOMO gap extrapolates to 0 as one would expect for the level spacing within a subband in infinite ribbons. These experimental observations are well reproduced by DFT calculations.
Detailed comparison between theory and experiment shows that DFT overestimates the experimental HOMO–LUMO gap. This is likely to be caused by the omission of the substrate, the resulting charging of the ribbon and the strong metallic screening. Furthermore, the neutral isolated ribbons are predicted to have singlet edge states for lengths >7 monomer units (Supplementary Fig. 4 and Supplementary Methods). The narrow bandgap predicted earlier by DFT7 matches very well with our measured and calculated gaps. These values differ from those reported recently by Zhang et al.18, who obtained a bandgap of 2.8 eV. They used another precursor molecule (tetrabromonaphthalene), which also results in N=5 armchair GNRs. Comparison with our results suggests that they have identified the most prominent features in the spectra as the conduction and valence band edges (see for example the peak at around 2.0 V in Fig. 2b). However, our experiments show that there are other, lower lying orbitals and the actual HOMO–LUMO gap on Au(111) reaches value of ∼100 meV in long ribbons. Finally, the many-body phenomena predicted for wider armchair ribbons30,31 or for zigzag ribbons32,33,34 are not expected for such a short segment of zigzag edge.
Kinked GNRs formed by connected straight segments
In addition to straight GNRs, also kinked ribbons are formed (see Fig. 1a). These ribbons typically consist of two straight segments connected at an angle of 150° corresponding to a rotation of 30° (Fig. 4a). Grain boundaries in graphene are known to accommodate carbon pentagon and heptagon defects35,36. Considering how two nanoribbons might connect, the creation of a pentagon does not require adding or removing carbon atoms from two straight ribbons. In addition, DFT calculations on GNRs with pentagon defects reproduce the experimental results better than structures with heptagons (see below and Supplementary Fig. 5).
We have measured dI/dV spectra as well conductance maps on kinked ribbons and Fig. 4 shows a ribbon where 4-monomer and 5-monomer long straight segments are joined. Figure 4b shows a dI/dV spectrum acquired at the kink exhibiting peaks at −120 and 100 mV and a pronounced shoulder at 300 mV. These energies correspond to the HOMO−1, HOMO and LUMO, respectively. Simulated dI/dV maps for a pentagon connection (HOMO−1, HOMO and LUMO shown in Fig. 4d) match the experimental results reasonably. The energy gap of the kinked ribbon is ca. 200 meV, which is close to a straight 9-monomer ribbon and smaller than expected for four- or five-monomer long GNRs. In addition, the molecular orbitals remain delocalized over the whole ribbon and hence, the kinks would not be expected to strongly affect the GNR conductivity.
Our results demonstrate nearly metallic behaviour in ultra-narrow, atomically well-defined graphene nanoribbons. We have synthesized the narrowest member (N=5) of the N=3p+2 family that has been predicted to exhibit narrow bandgap. We have confirmed this prediction and studied the evolution of the electronic states as a function of the ribbon length in detail using low-temperature STM and numerical methods. A bandgap of ∼100 meV is reached already in short ribbons of only 5 nm in length. In addition, kinked GNRs formed by connected straight armchair GNR segments also exhibit narrow gaps and delocalized electronic orbitals.
These experimental results suggest that this armchair GNR subfamily can be used as molecular wires, which should exhibit metallic behaviour at room temperature. This opens up new opportunities to connect different functional molecules in molecular electronic devices. In addition, it could be possible to integrate these nanoribbons with existing technology, where they have been suggested to outperform the present Cu interconnects both in terms of conductance properties and increased resistance to electromigration37,38,39,40,41.
Experiments were conducted under UHV conditions. The substrate was a thin Au(111) film deposited on a (111)-terminated Ir single crystal. The Ir crystal is cleaned by repeated sputtering/annealing cycles at high temperature. Gold (Goodfellow, 99.995%) was deposited from a high-temperature effusion cell at 1,180 °C. The deposition time was 2 h and the sample was kept at 310 °C during the deposition. Growth of GNRs was carried out in a two-step process in which the molecular precursor, dibromoperylene C20H10Br2 (see Supplementary Methods for synthesis information) is first thermally sublimed onto the sample. During the first thermal activation step at 200 °C, the biradical species produced after detachment of bromine diffuse along the surface to form a linear polymer chain. Subsequent annealing of the sample at 320 °C leads to dehydrogenation resulting in the formation of C–C bonds and fully conjugated GNRs with a well-defined width.
After the growth, the sample was inserted into a low-temperature STM operated at 5 K (Unisoku USM-1300), housed within the same UHV system. A Pt–Ir tip was used for topographic and spectroscopic measurements. Scanning tunnelling spectroscopy measurements were performed by lock-in amplifier (frequency=719 Hz, amplitude=15 mV (r.m.s.)) under open feedback.
First-principles calculations of N=5 armchair GNR were performed using DFT as implemented in the FHI-aims package42. The default tight basis sets were used together with the Perdew–Burke–Ernzerhof exchange-correlation functional in a spin-polarized calculation. The structure was fully relaxed until the force on each atom was smaller than 0.001 eV Å−1 and total energies were converged to 10−6 eV. In the LDOS simulations, a Lorentzian broadening of 0.03 eV of all the orbitals was used. Further details can be found in the Supplementary Information.
How to cite this article: Kimouche, A. et al. Ultra-narrow metallic armchair graphene nanoribbons. Nat. Commun. 6:10177 doi: 10.1038/ncomms10177 (2015).
This research made use of the Aalto Nanomicroscopy Center (Aalto NMC) facilities and was supported by the European Research Council (ERC-2011-StG no. 278698 PRECISE-NANO) and the Academy of Finland through its Centres of Excellence Program (projects no. 250280 and 251748). M.M.E. acknowledges financial support from the Finnish Cultural Foundation. We acknowledge the computational resources provided by Aalto Science-IT project and Finland’s IT Center for Science (CSC).
Supplementary Figures 1-5, Supplementary Methods and Supplementary References
About this article