Article | Published:

High-efficiency dye-sensitized solar cells with ferrocene-based electrolytes

Nature Chemistry volume 3, pages 211215 (2011) | Download Citation

Abstract

Dye-sensitized solar cells based on iodide/triiodide (I/I3) electrolytes are viable low-cost alternatives to conventional silicon solar cells. However, as well as providing record efficiencies of up to 12.0%, the use of I/I3 in such solar cells also brings about certain limitations that stem from its corrosive nature and complex two-electron redox chemistry. Alternative redox mediators have been investigated, but these generally fall well short of matching the performance of conventional I/I3 electrolytes. Here, we report energy conversion efficiencies of 7.5% (simulated sunlight, AM1.5, 1,000 W m−2) for dye-sensitized solar cells combining the archetypal ferrocene/ferrocenium (Fc/Fc+) single-electron redox couple with a novel metal-free organic donor–acceptor sensitizer (Carbz-PAHTDTT). These Fc/Fc+-based devices exceed the efficiency achieved for devices prepared using I/I3 electrolytes under comparable conditions, revealing the great potential of ferrocene-based electrolytes in future dye-sensitized solar cells applications. This improvement results from a more favourable matching of the redox potential of the ferrocene couple with that of the new donor–acceptor sensitizer.

Access optionsAccess options

Rent or Buy article

Get time limited or full article access on ReadCube.

from$8.99

All prices are NET prices.

References

  1. 1.

    & A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films. Nature 353, 737–740 (1991).

  2. 2.

    et al. Highly efficient light-harvesting ruthenium sensitizer for thin-film dye-sensitized solar cells. ACS Nano 3, 3103–3109 (2009).

  3. 3.

    et al. Efficient dye-sensitized solar cells with an organic photosensitizer featuring orderly conjugated ethylenedioxythiophene and dithienosilole blocks. Chem. Mater. 22, 1915–1925 (2010).

  4. 4.

    et al. High-efficiency dye-sensitized solar cells: The influence of lithium ions on exciton dissociation, charge recombination, and surface states. ACS Nano 4, 6032–6038 (2010).

  5. 5.

    & Characteristics of the iodide/triiodide redox mediator in dye-sensitized solar cells. Acc. Chem. Res. 42, 1819–1826 (2009).

  6. 6.

    , , , & The 2,2,6,6-tetramethyl-1-piperidinyloxy radical: an efficient, iodine-free redox mediator for dye-sensitized solar cells. Adv. Funct. Mater. 18, 341–346 (2008).

  7. 7.

    , , & Band edge movement and recombination kinetics in dye-sensitized nanocrystalline TiO2 solar cells: a study by intensity modulated photovoltage spectroscopy. J. Phys. Chem. B 101, 8141–8155 (1997).

  8. 8.

    , , & Interfacial recombination processes in dye-sensitized solar cells and methods to passivate the interfaces. Phys. Chem. B 105, 1422–1429 (2001).

  9. 9.

    & Photodriven heterogeneous charge transfer with transition-metal compounds anchored to TiO2 semiconductor surfaces. Chem. Soc. Rev. 38, 115–164 (2009).

  10. 10.

    , , , & Dye-sensitized solar cells. Chem. Rev. 110, 6595–6663 (2010).

  11. 11.

    , & Iodine/iodide-free dye-sensitized solar cells. Acc. Chem. Res. 42, 1827–1838 (2009).

  12. 12.

    , , , & CoII(dbbip)22+ complex rivals tri-iodide/iodide redox mediator in dye-sensitized photovoltaic cells. J. Phys. Chem. B 105, 10461–10464 (2001).

  13. 13.

    et al. Design of organic dyes and cobalt polypyridine redox mediators for high-efficiency dye-sensitized solar cells. J. Am. Chem. Soc. 132, 16714–16724 (2010).

  14. 14.

    , , & Blue copper model complexes with distorted tetragonal geometry acting as effective electron-transfer mediators in dye-sensitized solar cells. J. Am. Chem. Soc. 127, 9648–9654 (2005).

  15. 15.

    et al. Ni(III)/(IV) Bis(dicarbollide) as a fast, noncorrosive redox shuttle for dye-sensitized solar cells. J. Am. Chem. Soc. 132, 4580–4582 (2010).

  16. 16.

    et al. Two novel carbazole dyes for dye-sensitized solar cells with open-circuit voltages up to 1 V based on Br/Br3 electrolytes. Org. Lett. 11, 5542–5545 (2009).

  17. 17.

    , , , & Dye-sensitized solar cells incorporating a ‘liquid’ hole-transporting material. Nano Lett. 6, 2000–2003 (2006).

  18. 18.

    et al. An organic redox electrolyte to rival triiodide/iodide in dye-sensitized solar cells. Nat. Chem. 2, 385–389 (2010).

  19. 19.

    et al. A solid-state photovoltaic cell sensitized with a ruthenium bipyridyl complex. J. Phys. D 31, 1492–1496 (1998).

  20. 20.

    , , & Recent developments in solid-state dye-sensitized solar cells. ChemSusChem 1, 699–707 (2008).

  21. 21.

    & Conversion constants for redox potentials measured versus different reference electrodes in acetonitrile solutions at 25 °C. Inorg. Chim. Acta 298, 97–102 (2000).

  22. 22.

    et al. Electrochemistry of chlorinated ferrocenes: stability of chlorinated ferrocenium ions. Dalton Trans. 835–840 (1993).

  23. 23.

    et al. The decamethylferrocenium/decamethylferrocene redox couple: a superior redox standard to the ferrocenium/ferrocene redox couple for studying solvent effects on the thermodynamics of electron transfer. J. Phys. Chem. B 103, 6713–6722 (1999).

  24. 24.

    , & Outer-sphere redox couples as shuttles in dye-sensitized solar cells. Performance enhancement based on photoelectrode modification via atomic layer deposition. J. Phys. Chem. C 112, 19756–19764 (2008).

  25. 25.

    et al. Electrochemical characterization of TiO2 blocking layers prepared by reactive DC magnetron sputtering. J. Electroanal. Chem. 637, 79–83 (2009).

  26. 26.

    , , , & Characterization of surface passivation by poly(methylsiloxane) for dye-sensitized solar cells employing the ferrocene redox couple. J. Phys. Chem. C 114, 10551–10558 (2010).

  27. 27.

    , , & Dioxygen-decomposition of ferrocenium molecules in acetonitrile: the nature of the electrode-fouling films during ferrocene electrochemistry. J. Electroanal. Chem. 456, 217–221 (1998).

  28. 28.

    & Reactivity of ferrocenium cations with molecular oxygen in polar organic solvents: decomposition, redox reactions and stabilization. J. Organomet. Chem. 690, 1829–1839 (2005).

  29. 29.

    et al. Organic dye for highly efficient solid-state dye-sensitized solar cells. Adv. Mater. 17, 813–815 (2005).

  30. 30.

    , , , & Charge recombination in dye-sensitized nanocrystalline TiO2 solar cells. J. Phys. Chem. B 101, 2576–2582 (1997).

  31. 31.

    Interaction of ferricinium cation with pyridine. Zhurnal Obshchei Khimii 63, 1803–1809 (1993).

  32. 32.

    Standard potential of the ferrocene–ferricinium electrode in pyridine. Evaluation of proton medium effect. J. Phys. Chem. B 76, 243–245 (1972).

  33. 33.

    et al. Thiophene-functionalized coumarin dye for efficient dye-sensitized solar cells: electron lifetime improved by coadsorption of deoxycholic acid. J. Phys. Chem. C 111, 7224–7230 (2007).

  34. 34.

    et al. Combined experimental and DFT-TDDFT computational study of photoelectrochemical cell ruthenium sensitizers. J. Am. Chem. Soc. 127, 16835–16847 (2005).

  35. 35.

    , , , & Intensity dependence of the back reaction and transport of electrons in dye-sensitized nanocrystalline TiO2 solar cells. J. Phys. Chem. B 104, 949–958 (2000).

  36. 36.

    , , & A novel charge extraction method for the study of electron transport and interfacial transfer in dye sensitised nanocrystalline solar cells. Electrochem. Commun. 2, 658–662 (2000).

  37. 37.

    et al. New paradigm in molecular engineering of sensitizers for solar cell applications. J. Am. Chem. Soc. 131, 5930–5934 (2009).

Download references

Acknowledgements

The authors acknowledge financial support from the Australian Research Council through the Australian Centre of Excellence for Electromaterials Science (ACES), and the Discovery, Australian Research Fellowship and LIEF programs, the Commonwealth Scientific and Industrial Research Organisation (Australia), the Victorian State Government Department of Primary Industry (SERD Program, Victorian Organic Solar Cells Consortium) and Monash University (supporting U.B. with a Monash Research Fellowship). Particular thanks go to JGC Catalysts and Chemicals Ltd, Kitakyushu-Shi (Japan), for providing samples of TiO2 screen printing paste.

Author information

Author notes

    • Torben Daeneke
    •  & Tae-Hyuk Kwon

    These authors contributed equally to this work

Affiliations

  1. School of Chemistry and ARC Centre of Excellence for Electromaterials Science, Monash University, Victoria 3800, Australia

    • Torben Daeneke
    • , Udo Bach
    •  & Leone Spiccia
  2. School of Chemistry, Bio21 Institute, University of Melbourne, Victoria 3010, Australia

    • Tae-Hyuk Kwon
    •  & Andrew B. Holmes
  3. CSIRO Energy Technology, Clayton, VIC 3169, Australia

    • Noel W. Duffy
  4. Department of Materials Engineering, Monash University, Victoria 3800, Australia

    • Udo Bach

Authors

  1. Search for Torben Daeneke in:

  2. Search for Tae-Hyuk Kwon in:

  3. Search for Andrew B. Holmes in:

  4. Search for Noel W. Duffy in:

  5. Search for Udo Bach in:

  6. Search for Leone Spiccia in:

Contributions

L.S., U.B. and A.B.H. proposed the research. T.D. designed the electrolyte, developed the construction technique, fabricated the DSCs and carried out device characterization. T.-H.K. designed, synthesized and characterized the dye. N.W.D. and T.D. carried out the charge extraction and IMVS–IMPS measurements on instruments designed by N.W.D. L.S., U.B. and T.D. were mainly responsible for writing the manuscript, with contributions from N.W.D., T.-H.K. and A.B.H.

Competing interests

The authors declare no competing financial interests.

Corresponding authors

Correspondence to Udo Bach or Leone Spiccia.

Supplementary information

PDF files

  1. 1.

    Supplementary information

    Supplementary information

About this article

Publication history

Received

Accepted

Published

DOI

https://doi.org/10.1038/nchem.966