Article | Published:

A tough biodegradable elastomer

Nature Biotechnology volume 20, pages 602606 (2002) | Download Citation

Subjects

Abstract

Biodegradable polymers have significant potential in biotechnology and bioengineering. However, for some applications, they are limited by their inferior mechanical properties and unsatisfactory compatibility with cells and tissues. A strong, biodegradable, and biocompatible elastomer could be useful for fields such as tissue engineering, drug delivery, and in vivo sensing. We designed, synthesized, and characterized a tough biodegradable elastomer from biocompatible monomers. This elastomer forms a covalently crosslinked, three-dimensional network of random coils with hydroxyl groups attached to its backbone. Both crosslinking and the hydrogen-bonding interactions between the hydroxyl groups likely contribute to the unique properties of the elastomer. In vitro and in vivo studies show that the polymer has good biocompatibility. Polymer implants under animal skin are absorbed completely within 60 days with restoration of the implantation sites to their normal architecture.

Access optionsAccess options

Rent or Buy article

Get time limited or full article access on ReadCube.

from$8.99

All prices are NET prices.

References

  1. 1.

    & New challenges in biomaterials. Science 263, 1715–1720 (1994).

  2. 2.

    Biomaterials: status, challenges, and perspectives. AIChE J. 46, 1286–1289 (2000).

  3. 3.

    et al. Controlling mechanical and swelling properties of alginate hydrogels independently by cross-linker type and cross-linking density. Macromolecules 33, 4291–4294 (2000).

  4. 4.

    , , & Effect of poly(ethylene glycol) molecular weight on tensile and swelling properties of oligo(poly(ethylene glycol)fumarate) hydrogels for cartilage tissue engineering. J. Biomed. Mater. Res. 59, 429–437 (2002).

  5. 5.

    & Protein-based materials, toward a new level of structural control. Chem. Comm. 19, 1897–1904 (2001).

  6. 6.

    & Engineering the extracellular matrix: a novel approach to polymeric biomaterials. I. Control of the physical properties of artificial protein matrices designed to support adhesion of vascular endothelial cells. Biomacromolecules 1, 23–30 (2000).

  7. 7.

    et al. Elastic protein-based polymers in soft tissue augmentation and generation. J. Biomater. Sci., Polym. Ed. 9, 1015–1048 (1998).

  8. 8.

    , & Production of polyhydroxyalkanoates, a family of biodegradable plastics and elastomers, in bacteria and plants. Bio/Technology 13, 142–150 (1995).

  9. 9.

    et al. Fabrication of a trileaflet heart valve scaffold from a polyhydroxyalkanoate biopolyester for use in tissue engineering. Tissue Eng. 6, 183–187 (2000).

  10. 10.

    et al. Amino acid–based bioanalogous polymers. Synthesis and study of regular poly(ester amide)s based on bis(α-amino acid) α,ω-alkylene diesters, and aliphatic dicarboxylic acids. J. Polym. Sci. Part A: Polym. Chem. 37, 391–407 (1999).

  11. 11.

    & In Handbook of biodegradable polymers (eds Domb, A.J., Kost, J. & Wiseman, D.M.) 251–272 (Harwood Academic Publishers, Amsterdam; 1998).

  12. 12.

    & Endotoxin removal from protein solutions. J. Biotechnol. 76, 97–119 (2000).

  13. 13.

    & In Science and technology of rubber (eds Mark, J.E., Burak, E. & Eirich, F.R.) 189–210 (Academic Press, San Diego, CA; 1994).

  14. 14.

    & Biochemistry (John Wiley & Sons, New York, 1995).

  15. 15.

    Biochemistry (W.H. Freeman and Company, New York; 1995).

  16. 16.

    et al. Fibrillar structure and mechanical properties of collagen. J. Struct. Biol. 122, 119–122 (1998).

  17. 17.

    , , & Failure criterion of collagen fiber: viscoelastic behavior simulated by using load control data. Theor. Appl. Fract. Mech. 27, 1–12 (1997).

  18. 18.

    , , & Methacrylate-endcapped poly(d,l-lactide-co-trimethylene carbonate) oligomers. Network formation by thermal free-radical curing. Polymer 38, 6295–6301 (1997).

  19. 19.

    , & Biodegradable crosslinked polymers based on triethoxysilane terminated polylactide oligomers. Polymer 42, 3345–3353 (2001).

  20. 20.

    Advanced organic chemistry (John Wiley & Sons, New York; 1992).

  21. 21.

    , & Mechanisms for the transport of α,ω-dicarboxylates through the mitochondrial inner membrane. J. Biol. Chem. 271, 25338–25344 (1996).

  22. 22.

    & Dicarboxylic acids, an alternate fuel substrate in parenteral nutrition: an update. Clin. Nutr. 14, 143–148 (1995).

  23. 23.

    & The biological origin of ketotic dicarboxylic aciduria. In vivo and in vitro investigations of the omega-oxidation of C6-C16-monocarboxylic acids in unstarved, starved and diabetic rats. Biochim. Biophys. Acta 666, 394–404 (1981).

  24. 24.

    C6–C10-dicarboxylic aciduria in starved, fat-fed and diabetic rats receiving decanoic acid or medium-chain triacylglycerol. An in vivo measure of the rate of β-oxidation of fatty acids. Biochim. Biophys. Acta 664, 349–355 (1981).

  25. 25.

    & The development of polyanhydrides for drug delivery applications. J. Biomater. Sci. Polym. Ed. 3, 315–353 (1992).

  26. 26.

    et al. Synthesis, characterization, and enzymatic degradation of network aliphatic copolyesters. J. Polym. Sci. Part A: Polym. Chem. 37, 2005–2011 (1999).

  27. 27.

    , & Collagen adsorption on poly(methyl methacrylate): net-like structure formation upon drying. Polym. Int. 48, 271–276 (1999).

  28. 28.

    Introduction to physical polymer science (John Wiley & Sons, New York; 1992).

  29. 29.

    Analysis of stress–strain curves at fast and slow velocities of loading in vitro in the transverse section of the rat incisor periodontal ligament following the administration of β-aminopropionitrile. Arch. Oral Biol. 37, 439–444 (1992).

  30. 30.

    & The effect of velocity of loading on the biomechanical responses of the periodontal ligament in transverse sections of the rat molar in vitro. Arch. Oral Biol. 38, 369–375 (1993).

  31. 31.

    & Mechanical responses of the periodontal ligament in the transverse section of the rat mandibular incisor at various velocities of loading in vitro. J. Biomech. 26, 561–570 (1993).

  32. 32.

    Rubber as an engineering material: guideline for users (Hanser, Munich;1993).

  33. 33.

    , & A new molecular model for collagen elasticity based on synchrotron X- ray scattering evidence. Biophys. J. 72, 1376–1381 (1997).

  34. 34.

    & Strain rate effects on tensile failure properties of the common carotid artery and jugular veins of ferrets. J. Biomech. 25, 925–927 (1992).

  35. 35.

    The effect of a lathyritic diet on the sensitivity of tendon to strain rate. J. Biomech. Eng. 107, 166–174 (1985).

  36. 36.

    & Handbook of biomaterials evaluation (ed. von Recum, A.F.) 325–339 (Taylor & Francis, Philadelphia; 1999).

  37. 37.

    , , , & A comparative biocompatibility study of microspheres based on crosslinked dextran or poly(lactic-co-glycolic)acid after subcutaneous injection in rats. J. Biomed. Mater. Res. 56, 600–609 (2001).

  38. 38.

    , , , & Bone tissue response to biodegradable polymers used for intramedullary fracture fixation: a long-term in vivo study in sheep femora. Biomaterials 20, 121–128 (1999).

  39. 39.

    & Synthesis of dense brush polymers with cleavable grafts. Eur. Polym. J. 36, 743–749 (2000).

  40. 40.

    , & Tailoring of stimuli-responsive water- soluble acrylamide and methacrylamide polymers. Macromol. Chem. Phys. 202, 276–286 (2001).

  41. 41.

    , , & Synthesis and RGD peptide modification of a new biodegradable copolymer: poly(lactic acid-co-lysine). J. Am. Chem. Soc. 115, 11010–11011 (1993).

  42. 42.

    & Polymeric biomaterials with degradation sites for proteases involved in cell migration. Macromolecules 32, 241–244 (1999).

  43. 43.

    , , , & Smooth muscle cell growth in photopolymerized hydrogels with cell adhesive and proteolytically degradable domains: synthetic ECM analogs for tissue engineering. Biomaterials 22, 3045–3051 (2001).

  44. 44.

    , & Re-examination and further development of a precise and rapid dye method for measuring cell growth/cell kill. J. Immunol. Methods 119, 203–210 (1989).

  45. 45.

    National Institutes of Health. Principles of Laboratory Animal Care (NIH pub. no. 85-23, rev. 1985).

Download references

Acknowledgements

The authors thank Dr. David LaVan and Dr. Daniel Anderson for advice and discussions. We appreciate comments from Dr. David LaVan, Prof. Hiroyuki Ijima, and Ms. Sheryl Villa on the manuscript. This work was supported by NIH grant 5-R01-HL60435.

Author information

Author notes

    • Guillermo A. Ameer

    Current address: Biomedical Engineering Department, Northwestern University, Evanston, IL 60208.

Affiliations

  1. Department of Chemical Engineering, 77 Massachusetts Avenue, Massachusetts Institute of Technology, Cambridge, MA 02139.

    • Yadong Wang
    • , Guillermo A. Ameer
    •  & Robert Langer
  2. Division of Comparative Medicine, 77 Massachusetts Avenue, Massachusetts Institute of Technology, Cambridge, MA 02139.

    • Barbara J. Sheppard

Authors

  1. Search for Yadong Wang in:

  2. Search for Guillermo A. Ameer in:

  3. Search for Barbara J. Sheppard in:

  4. Search for Robert Langer in:

Corresponding author

Correspondence to Robert Langer.

Supplementary information

About this article

Publication history

Received

Accepted

Published

DOI

https://doi.org/10.1038/nbt0602-602

Further reading