Free-space volumetric displays, or displays that create luminous image points in space, are the technology that most closely resembles the three-dimensional displays of popular fiction1. Such displays are capable of producing images in ‘thin air’ that are visible from almost any direction and are not subject to clipping. Clipping restricts the utility of all three-dimensional displays that modulate light at a two-dimensional surface with an edge boundary; these include holographic displays, nanophotonic arrays, plasmonic displays, lenticular or lenslet displays and all technologies in which the light scattering surface and the image point are physically separate. Here we present a free-space volumetric display based on photophoretic optical trapping2 that produces full-colour graphics in free space with ten-micrometre image points using persistence of vision. This display works by first isolating a cellulose particle in a photophoretic trap created by spherical and astigmatic aberrations. The trap and particle are then scanned through a display volume while being illuminated with red, green and blue light. The result is a three-dimensional image in free space with a large colour gamut, fine detail and low apparent speckle. This platform, named the Optical Trap Display, is capable of producing image geometries that are currently unobtainable with holographic and light-field technologies, such as long-throw projections, tall sandtables and ‘wrap-around’ displays1.

Access optionsAccess options

Rent or Buy article

Get time limited or full article access on ReadCube.


All prices are NET prices.


  1. 1.

    Why don't we have Princess Leia holograms yet? All Tech Considered (2017)

  2. 2.

    , , & Robust trapping and manipulation of airborne particles with a bottle beam. Opt. Express 19, 17350–17356 (2011)

  3. 3.

    On the uncertain future of the volumetric 3D display paradigm. 3D Res. 8, 11 (2017)

  4. 4.

    & Volumetric Three-Dimensional Display Systems Vol. 1, 330 (Wiley-VCH, 2000)

  5. 5.

    OSA Display Technical Group Illumiconclave I (Optical Society of America, 2015);

  6. 6.

    & Direct volume display devices. IEEE Comput. Graph. Appl. 13, 57–65 (1993)

  7. 7.

    ., & Laser produced 3D display in the air. In Proc. ACM SIGGRAPH 2006 Emerging Technologies (Association for Computing Machinery, 2006)

  8. 8.

    et al. Fairy lights in femtoseconds: aerial and volumetric graphics rendered by focused femtosecond laser combined with computational holographic fields. ACM Trans. Graph. 35, 17 (2016)

  9. 9.

    et al. Laser-plasma scanning 3D display for putting digital contents in free space. Proc. SPIE 6803, 680309 (2008)

  10. 10.

    : Holographic Vector Display. Kickstarter (2016)

  11. 11.

    Volumetric display with dust as the participating medium. US patent 6,997,558 (2006)

  12. 12.

    . et al. JOLED: a mid-air display based on electrostatic rotation of levitated Janus objects. In Proc. 29th Annual Symposium on User Interface Software and Technology 437–448 (ACM, 2016)

  13. 13.

    A history of single aerosol particle levitation. Aerosol Sci. Technol. 26, 212–254 (1997)

  14. 14.

    Über die Messung von Elektrizitätsmengen, die kleiner zu sein scheinen als die Ladung des einwertigen Wasserstoffions oder Elektrons und von dessen Vielfachen abweichen (Hölder, 1910)

  15. 15.

    , & Method and apparatus for optical micro manipulation. US patent 5,363,190 (1994)

  16. 16.

    Photophoresis–a forgotten force? Kona Powder Part. J. 31, 181–199 (2014)

  17. 17.

    Direction, magnitude and causes of photophoretic forces. J. Aerosol Sci. 16, 29–42 (1985)

  18. 18.

    The mean free path in air. J. Aerosol Sci. 19, 159–166 (1988)

  19. 19.

    , , , & Photophoretic manipulation of absorbing aerosol particles with vortex beams: theory versus experiment. Opt. Express 17, 8201–8211 (2009)

  20. 20.

    , & Optical particle trapping with higher-order doughnut beams produced using high efficiency computer generated holograms. J. Mod. Opt. 42, 217–223 (1995)

  21. 21.

    , & Visual persistence: effects of flash luminance, duration and energy. Vision Res. 14, 295–303 (1974)

  22. 22.

    Light-driven molecular rotational motor. US patent 6,180,940 (2001)

  23. 23.

    & The implications of particle rotation on the effect of photophoresis. Mon. Not. R. Astron. Soc. 420, 183–186 (2012)

  24. 24.

    & Particle trap. US patent 5,170,890 (1992)

  25. 25.

    , & Characterizing exhaled airflow from breathing and talking. Indoor Air 20, 31–39 (2010)

  26. 26.

    , , , & Observation of nitrogen vacancy photoluminescence from an optically levitated nanodiamond. Opt. Lett. 38, 2976–2979 (2013)

  27. 27.

    & Optical trapping and binding. Rep. Prog. Phys. 76, 026401 (2013)

  28. 28.

    , & Optical trapping and manipulation of single cells using infrared laser beams. Nature 330, 769–771 (1987)

Download references


We thank L. Baxter from Brigham Young University, Chemical Engineering Department, for use of his equipment, as well as G. Nielson, V. M. Bove Jr and P.-A. Blanche for discussions. We are grateful to S. Hilton for help with 3D printing. We acknowledge the Blender Foundation for content (Fig. 3c; adapted from http://www.bigbuckbunny.org under a Creative Commons license, https://creativecommons.org/licenses/by/3.0/) and software for 3D image conversion. We also acknowledge those who supplied source material for the holograms and volumetric images shown. B. Wilcox and Brigham Young University Communications provided footage of the Y logo in Fig. 1 and Supplementary Video 1. The butterfly image used to create the volumetric image and holograms shown in Fig. 2a and Extended Data Fig. 1a, b was sourced from Rvector, Shutterstock. The volumetric image in Fig. 3d was generated from NASA photograph number AC75-0027. The image of the arm shown in Fig. 2h and illustrated in Extended Data Fig. 1e was created using a model from clayguy, CGTrader. The model of the sitting human figure that is 3D-printed in Fig. 2g and illustrated in Extended Data Fig. 1d was sourced from fletch55, 3D Warehouse.

Author information


  1. Department of Electrical and Computer Engineering, Brigham Young University, Provo, Utah 84602, USA

    • D. E. Smalley
    • , E. Nygaard
    • , K. Squire
    • , J. Van Wagoner
    • , J. Rasmussen
    • , S. Gneiting
    • , K. Qaderi
    • , J. Goodsell
    • , W. Rogers
    • , M. Lindsey
    • , K. Costner
    • , A. Monk
    • , M. Pearson
    •  & B. Haymore
  2. Department of Physics and Astronomy, Brigham Young University, Provo, Utah 84602, USA

    • J. Peatross


  1. Search for D. E. Smalley in:

  2. Search for E. Nygaard in:

  3. Search for K. Squire in:

  4. Search for J. Van Wagoner in:

  5. Search for J. Rasmussen in:

  6. Search for S. Gneiting in:

  7. Search for K. Qaderi in:

  8. Search for J. Goodsell in:

  9. Search for W. Rogers in:

  10. Search for M. Lindsey in:

  11. Search for K. Costner in:

  12. Search for A. Monk in:

  13. Search for M. Pearson in:

  14. Search for B. Haymore in:

  15. Search for J. Peatross in:


D.E.S. and J.P. formed the original concept. D.E.S. directed the research. E.N. developed the colour system and performed the analysis. K.S., K.C., B.H. and M.P. performed early trapping experiments and identified suitable particles. K.S., K.C., B.H., M.P. and J.V.W. developed the first monochrome system and the predecessor to the colour system. K.C. and J.R. developed the fast version of the monochrome system. J.R. developed the automatic pickup mechanism. S.G. and K.Q. developed the SLM trapping system. J.G. calculated the particle acceleration, performed the phase-mask analysis and conducted the literature review. K.C. and B.H. created the trapping chambers and performed aerosol experiments. W.R. created the hardware and software to migrate the system to full 3D images. M.L. created the raster-to-vector conversion algorithms. A.M. developed the driving architecture for full resolution images.

Competing interests

The authors declare no competing financial interests.

Corresponding author

Correspondence to D. E. Smalley.

Reviewer Information Nature thanks B. G. Blundell and C. Wang for their contribution to the peer review of this work.

Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Extended data

Supplementary information


  1. 1.

    Persistence of vision example

    This video shows a photophoretic image of the Brigham Young University, ‘Y’ logo drawn at persistence of vision rates (>10 Hz) in freespace. The illumination color of the logo is slowly varied.

  2. 2.

    Particle motion

    In this video high-acceleration movements, jumps, rasters, and random walks are shown.

About this article

Publication history







By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.